projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 124bfc66 TL |
1 | /* |
| 2 | * This program is free software; you can redistribute it and/or modify | |
| 3 | * it under the terms of the GNU General Public License version 2 as | |
| 4 | * published by the Free Software Foundation. | |
| 5 | */ | |
| 6 | /dts-v1/; | |
| 7 | ||
| 8 | #include "dra62x.dtsi" | |
| 0c3e192a | 9 | #include <dt-bindings/interrupt-controller/irq.h> |
| 124bfc66 TL |
10 | |
| 11 | / { | |
| 12 | model = "DRA62x J5 Eco EVM"; | |
| 13 | compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148"; | |
| 14 | ||
| 387117c1 | 15 | memory@80000000 { |
| 124bfc66 TL |
16 | device_type = "memory"; |
| 17 | reg = <0x80000000 0x40000000>; /* 1 GB */ | |
| 18 | }; | |
| 4d810fb2 TL |
19 | |
| 20 | /* MIC94060YC6 controlled by SD1_POW pin */ | |
| 909b0ebd | 21 | vmmcsd_fixed: fixedregulator0 { |
| 4d810fb2 TL |
22 | compatible = "regulator-fixed"; |
| 23 | regulator-name = "vmmcsd_fixed"; | |
| 24 | regulator-min-microvolt = <3300000>; | |
| 25 | regulator-max-microvolt = <3300000>; | |
| 26 | }; | |
| 124bfc66 TL |
27 | }; |
| 28 | ||
| 29 | &cpsw_emac0 { | |
| 30 | phy_id = <&davinci_mdio>, <0>; | |
| 31 | phy-mode = "rgmii"; | |
| 32 | }; | |
| 33 | ||
| 34 | &cpsw_emac1 { | |
| 35 | phy_id = <&davinci_mdio>, <1>; | |
| 36 | phy-mode = "rgmii"; | |
| 37 | }; | |
| 4d810fb2 | 38 | |
| 100be58a TL |
39 | &gpmc { |
| 40 | ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ | |
| 41 | ||
| 42 | nand@0,0 { | |
| 0c3e192a | 43 | compatible = "ti,omap2-nand"; |
| 100be58a | 44 | reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ |
| 0c3e192a RQ |
45 | interrupt-parent = <&gpmc>; |
| 46 | interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ | |
| 47 | <1 IRQ_TYPE_NONE>; /* termcount */ | |
| 48 | linux,mtd-name= "micron,mt29f2g16aadwp"; | |
| 100be58a TL |
49 | #address-cells = <1>; |
| 50 | #size-cells = <1>; | |
| 51 | ti,nand-ecc-opt = "bch8"; | |
| 52 | nand-bus-width = <16>; | |
| 53 | gpmc,device-width = <2>; | |
| 54 | gpmc,sync-clk-ps = <0>; | |
| 55 | gpmc,cs-on-ns = <0>; | |
| 56 | gpmc,cs-rd-off-ns = <44>; | |
| 57 | gpmc,cs-wr-off-ns = <44>; | |
| 58 | gpmc,adv-on-ns = <6>; | |
| 59 | gpmc,adv-rd-off-ns = <34>; | |
| 60 | gpmc,adv-wr-off-ns = <44>; | |
| 61 | gpmc,we-on-ns = <0>; | |
| 62 | gpmc,we-off-ns = <40>; | |
| 63 | gpmc,oe-on-ns = <0>; | |
| 64 | gpmc,oe-off-ns = <54>; | |
| 65 | gpmc,access-ns = <64>; | |
| 66 | gpmc,rd-cycle-ns = <82>; | |
| 67 | gpmc,wr-cycle-ns = <82>; | |
| 100be58a TL |
68 | gpmc,bus-turnaround-ns = <0>; |
| 69 | gpmc,cycle2cycle-delay-ns = <0>; | |
| 70 | gpmc,clk-activation-ns = <0>; | |
| 100be58a TL |
71 | gpmc,wr-access-ns = <40>; |
| 72 | gpmc,wr-data-mux-bus-ns = <0>; | |
| 73 | partition@0 { | |
| 74 | label = "X-Loader"; | |
| 75 | reg = <0 0x80000>; | |
| 76 | }; | |
| 77 | partition@0x80000 { | |
| 78 | label = "U-Boot"; | |
| 79 | reg = <0x80000 0x1c0000>; | |
| 80 | }; | |
| 81 | partition@0x1c0000 { | |
| 82 | label = "Environment"; | |
| 83 | reg = <0x240000 0x40000>; | |
| 84 | }; | |
| 85 | partition@0x280000 { | |
| 86 | label = "Kernel"; | |
| 87 | reg = <0x280000 0x500000>; | |
| 88 | }; | |
| 89 | partition@0x780000 { | |
| 90 | label = "Filesystem"; | |
| 91 | reg = <0x780000 0xf880000>; | |
| 92 | }; | |
| 93 | }; | |
| 94 | }; | |
| 95 | ||
| 4d810fb2 TL |
96 | &mmc2 { |
| 97 | pinctrl-names = "default"; | |
| 98 | pinctrl-0 = <&sd1_pins>; | |
| 99 | vmmc-supply = <&vmmcsd_fixed>; | |
| 100 | bus-width = <4>; | |
| 101 | cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; | |
| 102 | }; | |
| 103 | ||
| 104 | &pincntl { | |
| 105 | sd1_pins: pinmux_sd1_pins { | |
| 106 | pinctrl-single,pins = < | |
| 107 | DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */ | |
| 108 | DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */ | |
| 109 | DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */ | |
| 110 | DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */ | |
| 111 | DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */ | |
| 112 | DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */ | |
| 113 | DM814X_IOPAD(0x0924, PIN_OUTPUT | 0x40) /* SD1_POW */ | |
| 114 | DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP | 0x80) /* GP1[6] */ | |
| 115 | >; | |
| 116 | }; | |
| 43fe6de3 TL |
117 | |
| 118 | usb0_pins: pinmux_usb0_pins { | |
| 119 | pinctrl-single,pins = < | |
| 120 | DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ | |
| 121 | >; | |
| 122 | }; | |
| 123 | }; | |
| 124 | ||
| 125 | /* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */ | |
| 126 | &usb0 { | |
| 127 | pinctrl-names = "default"; | |
| 128 | pinctrl-0 = <&usb0_pins>; | |
| 129 | dr_mode = "otg"; | |
| 130 | }; | |
| 131 | ||
| 132 | &usb1_phy { | |
| 133 | status = "disabled"; | |
| 134 | }; | |
| 135 | ||
| 136 | &usb1 { | |
| 137 | status = "disabled"; | |
| 4d810fb2 | 138 | }; |