[deliverable/linux.git] / arch / arm / boot / dts / imx6q-gw5400-a.dts

/*
 * Copyright 2013 Gateworks Corporation
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "imx6q.dtsi"

/ {
	model = "Gateworks Ventana GW5400-A";
	compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";

	/* these are used by bootloader for disabling nodes */
	aliases {
		ethernet1 = &eth1;
		i2c0 = &i2c1;
		i2c1 = &i2c2;
		i2c2 = &i2c3;
		led0 = &led0;
		led1 = &led1;
		led2 = &led2;
		ssi0 = &ssi1;
		spi0 = &ecspi1;
		usb0 = &usbh1;
		usb1 = &usbotg;
	};

	chosen {
		bootargs = "console=ttymxc1,115200";
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_leds>;

		led0: user1 {
			label = "user1";
			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
			default-state = "on";
			linux,default-trigger = "heartbeat";
		};

		led1: user2 {
			label = "user2";
			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
			default-state = "off";
		};

		led2: user3 {
			label = "user3";
			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
			default-state = "off";
		};
	};

	memory {
		reg = <0x10000000 0x40000000>;
	};

	pps {
		compatible = "pps-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_leds>;
		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
		status = "okay";
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_1p0v: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			regulator-name = "1P0V";
			regulator-min-microvolt = <1000000>;
			regulator-max-microvolt = <1000000>;
			regulator-always-on;
		};

		reg_3p3v: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_usb_h1_vbus: regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "usb_h1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			regulator-always-on;
		};

		reg_usb_otg_vbus: regulator@3 {
			compatible = "regulator-fixed";
			reg = <3>;
			regulator-name = "usb_otg_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};
	};

	sound {
		compatible = "fsl,imx6q-ventana-sgtl5000",
			     "fsl,imx-audio-sgtl5000";
		model = "sgtl5000-audio";
		ssi-controller = <&ssi1>;
		audio-codec = <&codec>;
		audio-routing =
			"MIC_IN", "Mic Jack",
			"Mic Jack", "Mic Bias",
			"Headphone Jack", "HP_OUT";
		mux-int-port = <1>;
		mux-ext-port = <4>;
	};
};

&audmux {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_audmux>;
	status = "okay";
};

&ecspi1 {
	fsl,spi-num-chipselects = <1>;
	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi1>;
	status = "okay";

	flash: m25p80@0 {
		compatible = "sst,w25q256", "jedec,spi-nor";
		spi-max-frequency = <30000000>;
		reg = <0>;
	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet>;
	phy-mode = "rgmii-id";
	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
	status = "okay";
};

&hdmi {
	ddc-i2c-bus = <&i2c3>;
	status = "okay";
};

&i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	eeprom1: eeprom@50 {
		compatible = "atmel,24c02";
		reg = <0x50>;
		pagesize = <16>;
	};

	eeprom2: eeprom@51 {
		compatible = "atmel,24c02";
		reg = <0x51>;
		pagesize = <16>;
	};

	eeprom3: eeprom@52 {
		compatible = "atmel,24c02";
		reg = <0x52>;
		pagesize = <16>;
	};

	eeprom4: eeprom@53 {
		compatible = "atmel,24c02";
		reg = <0x53>;
		pagesize = <16>;
	};

	gpio: pca9555@23 {
		compatible = "nxp,pca9555";
		reg = <0x23>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	rtc: ds1672@68 {
		compatible = "dallas,ds1672";
		reg = <0x68>;
	};
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";

	pmic: pfuze100@08 {
		compatible = "fsl,pfuze100";
		reg = <0x08>;

		regulators {
			sw1a_reg: sw1ab {
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1875000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <6250>;
			};

			sw1c_reg: sw1c {
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1875000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <6250>;
			};

			sw2_reg: sw2 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3950000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw3a_reg: sw3a {
				regulator-min-microvolt = <400000>;
				regulator-max-microvolt = <1975000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw3b_reg: sw3b {
				regulator-min-microvolt = <400000>;
				regulator-max-microvolt = <1975000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw4_reg: sw4 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
			};

			swbst_reg: swbst {
				regulator-min-microvolt = <5000000>;
				regulator-max-microvolt = <5150000>;
			};

			snvs_reg: vsnvs {
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <3000000>;
				regulator-boot-on;
				regulator-always-on;
			};

			vref_reg: vrefddr {
				regulator-boot-on;
				regulator-always-on;
			};

			vgen1_reg: vgen1 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1550000>;
			};

			vgen2_reg: vgen2 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1550000>;
			};

			vgen3_reg: vgen3 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
			};

			vgen4_reg: vgen4 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen5_reg: vgen5 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen6_reg: vgen6 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};
		};
	};
};

&i2c3 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";

	accelerometer: mma8450@1c {
		compatible = "fsl,mma8450";
		reg = <0x1c>;
	};

	codec: sgtl5000@0a {
		compatible = "fsl,sgtl5000";
		reg = <0x0a>;
		clocks = <&clks IMX6QDL_CLK_CKO>;
		VDDA-supply = <&sw4_reg>;
		VDDIO-supply = <&reg_3p3v>;
	};

	touchscreen: egalax_ts@04 {
		compatible = "eeti,egalax_ts";
		reg = <0x04>;
		interrupt-parent = <&gpio7>;
		interrupts = <12 2>;
		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
	};
};

&ldb {
	status = "okay";
};

&pcie {
	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
	status = "okay";

	eth1: sky2@8 { /* MAC/PHY on bus 8 */
		compatible = "marvell,sky2";
	};
};

&ssi1 {
	status = "okay";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

&uart5 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart5>;
	status = "okay";
};

&usbotg {
	vbus-supply = <&reg_usb_otg_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg>;
	disable-over-current;
	status = "okay";
};

&usbh1 {
	vbus-supply = <&reg_usb_h1_vbus>;
	status = "okay";
};

&usdhc3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc3>;
	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&reg_3p3v>;
	status = "okay";
};

&iomuxc {
	imx6q-gw5400-a {

		pinctrl_audmux: audmuxgrp {
			fsl,pins = <
				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
			>;
		};

		pinctrl_ecspi1: ecspi1grp {
			fsl,pins = <
				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0 /* SPINOR_CS0# */
			>;
		};

		pinctrl_enet: enetgrp {
			fsl,pins = <
				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
			>;
		};

		pinctrl_gpio_leds: gpioledsgrp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0 /* user1 led */
				MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0 /* user2 led */
				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* user3 led */
			>;
		};

		pinctrl_i2c1: i2c1grp {
			fsl,pins = <
				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
			>;
		};

		pinctrl_i2c2: i2c2grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
			>;
		};

		pinctrl_i2c3: i2c3grp {
			fsl,pins = <
				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
			>;
		};

		pinctrl_pcie: pciegrp {
			fsl,pins = <
				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
			>;
		};

		pinctrl_pps: ppsgrp {
			fsl,pins = <
				MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0 /* GPS_PPS */
			>;
		};

		pinctrl_uart1: uart1grp {
			fsl,pins = <
				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
			>;
		};

		pinctrl_uart2: uart2grp {
			fsl,pins = <
				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
			>;
		};

		pinctrl_uart5: uart5grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
			>;
		};

		pinctrl_usbotg: usbotggrp {
			fsl,pins = <
				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
			>;
		};

		pinctrl_usdhc3: usdhc3grp {
			fsl,pins = <
				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
			>;
		};
	};
};
Commit	Line	Data
e3946fe8 TH	1	/*
	2	* Copyright 2013 Gateworks Corporation
	3	*
	4	* The code contained herein is licensed under the GNU General Public
	5	* License. You may obtain a copy of the GNU General Public License
	6	* Version 2 or later at the following locations:
	7	*
	8	* http://www.opensource.org/licenses/gpl-license.html
	9	* http://www.gnu.org/copyleft/gpl.html
	10	*/
	11
	12	/dts-v1/;
326cdb16	13	#include <dt-bindings/gpio/gpio.h>
e3946fe8 TH	14	#include "imx6q.dtsi"
	15
	16	/ {
	17	model = "Gateworks Ventana GW5400-A";
	18	compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
	19
	20	/* these are used by bootloader for disabling nodes */
	21	aliases {
e3946fe8 TH	22	ethernet1 = &eth1;
	23	i2c0 = &i2c1;
	24	i2c1 = &i2c2;
	25	i2c2 = &i2c3;
	26	led0 = &led0;
	27	led1 = &led1;
	28	led2 = &led2;
e3946fe8 TH	29	ssi0 = &ssi1;
	30	spi0 = &ecspi1;
	31	usb0 = &usbh1;
	32	usb1 = &usbotg;
e3946fe8 TH	33	};
	34
	35	chosen {
	36	bootargs = "console=ttymxc1,115200";
	37	};
	38
	39	leds {
	40	compatible = "gpio-leds";
b5f37b76 TH	41	pinctrl-names = "default";
b5f37b76 TH	42	pinctrl-0 = <&pinctrl_gpio_leds>;
e3946fe8 TH	43
	44	led0: user1 {
	45	label = "user1";
326cdb16	46	gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
e3946fe8 TH	47	default-state = "on";
	48	linux,default-trigger = "heartbeat";
	49	};
	50
	51	led1: user2 {
	52	label = "user2";
326cdb16	53	gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
e3946fe8 TH	54	default-state = "off";
	55	};
	56
	57	led2: user3 {
	58	label = "user3";
326cdb16	59	gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
e3946fe8 TH	60	default-state = "off";
	61	};
	62	};
	63
	64	memory {
	65	reg = <0x10000000 0x40000000>;
	66	};
	67
	68	pps {
	69	compatible = "pps-gpio";
b5f37b76 TH	70	pinctrl-names = "default";
b5f37b76 TH	71	pinctrl-0 = <&pinctrl_gpio_leds>;
326cdb16	72	gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
e3946fe8 TH	73	status = "okay";
	74	};
	75
	76	regulators {
	77	compatible = "simple-bus";
	78	#address-cells = <1>;
	79	#size-cells = <0>;
	80
	81	reg_1p0v: regulator@0 {
	82	compatible = "regulator-fixed";
	83	reg = <0>;
	84	regulator-name = "1P0V";
	85	regulator-min-microvolt = <1000000>;
	86	regulator-max-microvolt = <1000000>;
	87	regulator-always-on;
	88	};
	89
	90	reg_3p3v: regulator@1 {
	91	compatible = "regulator-fixed";
	92	reg = <1>;
	93	regulator-name = "3P3V";
	94	regulator-min-microvolt = <3300000>;
	95	regulator-max-microvolt = <3300000>;
	96	regulator-always-on;
	97	};
	98
	99	reg_usb_h1_vbus: regulator@2 {
	100	compatible = "regulator-fixed";
	101	reg = <2>;
	102	regulator-name = "usb_h1_vbus";
	103	regulator-min-microvolt = <5000000>;
	104	regulator-max-microvolt = <5000000>;
	105	regulator-always-on;
	106	};
	107
	108	reg_usb_otg_vbus: regulator@3 {
	109	compatible = "regulator-fixed";
	110	reg = <3>;
	111	regulator-name = "usb_otg_vbus";
	112	regulator-min-microvolt = <5000000>;
	113	regulator-max-microvolt = <5000000>;
326cdb16	114	gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
e3946fe8 TH	115	enable-active-high;
	116	};
	117	};
	118
	119	sound {
b12d1e94	120	compatible = "fsl,imx6q-ventana-sgtl5000",
e3946fe8	121	"fsl,imx-audio-sgtl5000";
b12d1e94	122	model = "sgtl5000-audio";
e3946fe8 TH	123	ssi-controller = <&ssi1>;
	124	audio-codec = <&codec>;
	125	audio-routing =
	126	"MIC_IN", "Mic Jack",
	127	"Mic Jack", "Mic Bias",
	128	"Headphone Jack", "HP_OUT";
	129	mux-int-port = <1>;
	130	mux-ext-port = <4>;
	131	};
	132	};
	133
	134	&audmux {
	135	pinctrl-names = "default";
	136	pinctrl-0 = <&pinctrl_audmux>;
	137	status = "okay";
	138	};
	139
	140	&ecspi1 {
	141	fsl,spi-num-chipselects = <1>;
326cdb16	142	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
e3946fe8 TH	143	pinctrl-names = "default";
	144	pinctrl-0 = <&pinctrl_ecspi1>;
	145	status = "okay";
	146
	147	flash: m25p80@0 {
79826ac6	148	compatible = "sst,w25q256", "jedec,spi-nor";
e3946fe8 TH	149	spi-max-frequency = <30000000>;
	150	reg = <0>;
	151	};
	152	};
	153
	154	&fec {
	155	pinctrl-names = "default";
	156	pinctrl-0 = <&pinctrl_enet>;
3a35e470	157	phy-mode = "rgmii-id";
326cdb16	158	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
e3946fe8 TH	159	status = "okay";
	160	};
	161
aef15dba TH	162	&hdmi {
	163	ddc-i2c-bus = <&i2c3>;
	164	status = "okay";
	165	};
	166
e3946fe8 TH	167	&i2c1 {
	168	clock-frequency = <100000>;
	169	pinctrl-names = "default";
	170	pinctrl-0 = <&pinctrl_i2c1>;
	171	status = "okay";
	172
	173	eeprom1: eeprom@50 {
	174	compatible = "atmel,24c02";
	175	reg = <0x50>;
	176	pagesize = <16>;
	177	};
	178
	179	eeprom2: eeprom@51 {
	180	compatible = "atmel,24c02";
	181	reg = <0x51>;
	182	pagesize = <16>;
	183	};
	184
	185	eeprom3: eeprom@52 {
	186	compatible = "atmel,24c02";
	187	reg = <0x52>;
	188	pagesize = <16>;
	189	};
	190
	191	eeprom4: eeprom@53 {
	192	compatible = "atmel,24c02";
	193	reg = <0x53>;
	194	pagesize = <16>;
	195	};
	196
	197	gpio: pca9555@23 {
	198	compatible = "nxp,pca9555";
	199	reg = <0x23>;
	200	gpio-controller;
	201	#gpio-cells = <2>;
	202	};
	203
e3946fe8 TH	204	rtc: ds1672@68 {
	205	compatible = "dallas,ds1672";
	206	reg = <0x68>;
	207	};
	208	};
	209
	210	&i2c2 {
	211	clock-frequency = <100000>;
	212	pinctrl-names = "default";
	213	pinctrl-0 = <&pinctrl_i2c2>;
	214	status = "okay";
	215
	216	pmic: pfuze100@08 {
	217	compatible = "fsl,pfuze100";
	218	reg = <0x08>;
	219
	220	regulators {
	221	sw1a_reg: sw1ab {
	222	regulator-min-microvolt = <300000>;
	223	regulator-max-microvolt = <1875000>;
	224	regulator-boot-on;
	225	regulator-always-on;
	226	regulator-ramp-delay = <6250>;
	227	};
	228
	229	sw1c_reg: sw1c {
	230	regulator-min-microvolt = <300000>;
	231	regulator-max-microvolt = <1875000>;
	232	regulator-boot-on;
	233	regulator-always-on;
	234	regulator-ramp-delay = <6250>;
	235	};
	236
	237	sw2_reg: sw2 {
	238	regulator-min-microvolt = <800000>;
	239	regulator-max-microvolt = <3950000>;
	240	regulator-boot-on;
	241	regulator-always-on;
	242	};
	243
	244	sw3a_reg: sw3a {
	245	regulator-min-microvolt = <400000>;
	246	regulator-max-microvolt = <1975000>;
	247	regulator-boot-on;
	248	regulator-always-on;
	249	};
	250
	251	sw3b_reg: sw3b {
	252	regulator-min-microvolt = <400000>;
	253	regulator-max-microvolt = <1975000>;
	254	regulator-boot-on;
	255	regulator-always-on;
	256	};
	257
	258	sw4_reg: sw4 {
	259	regulator-min-microvolt = <800000>;
	260	regulator-max-microvolt = <3300000>;
	261	};
	262
	263	swbst_reg: swbst {
	264	regulator-min-microvolt = <5000000>;
	265	regulator-max-microvolt = <5150000>;
	266	};
	267
268	snvs_reg: vsnvs {
269	regulator-min-microvolt = <1000000>;
270	regulator-max-microvolt = <3000000>;
271	regulator-boot-on;
272	regulator-always-on;
273	};
274
275	vref_reg: vrefddr {
276	regulator-boot-on;
277	regulator-always-on;
278	};
279
280	vgen1_reg: vgen1 {
281	regulator-min-microvolt = <800000>;
282	regulator-max-microvolt = <1550000>;
283	};
284
285	vgen2_reg: vgen2 {
286	regulator-min-microvolt = <800000>;
287	regulator-max-microvolt = <1550000>;
288	};
289
290	vgen3_reg: vgen3 {
291	regulator-min-microvolt = <1800000>;
292	regulator-max-microvolt = <3300000>;
293	};
294
295	vgen4_reg: vgen4 {
296	regulator-min-microvolt = <1800000>;
297	regulator-max-microvolt = <3300000>;
298	regulator-always-on;
299	};
300
301	vgen5_reg: vgen5 {
302	regulator-min-microvolt = <1800000>;
303	regulator-max-microvolt = <3300000>;
304	regulator-always-on;
305	};
306
307	vgen6_reg: vgen6 {
308	regulator-min-microvolt = <1800000>;
309	regulator-max-microvolt = <3300000>;
310	regulator-always-on;
311	};
312	};
313	};
e3946fe8 TH	314	};
	315
	316	&i2c3 {
	317	clock-frequency = <100000>;
	318	pinctrl-names = "default";
	319	pinctrl-0 = <&pinctrl_i2c3>;
	320	status = "okay";
	321
	322	accelerometer: mma8450@1c {
	323	compatible = "fsl,mma8450";
	324	reg = <0x1c>;
	325	};
	326
	327	codec: sgtl5000@0a {
	328	compatible = "fsl,sgtl5000";
	329	reg = <0x0a>;
b26a68c1	330	clocks = <&clks IMX6QDL_CLK_CKO>;
e3946fe8 TH	331	VDDA-supply = <&sw4_reg>;
	332	VDDIO-supply = <&reg_3p3v>;
	333	};
	334
e3946fe8 TH	335	touchscreen: egalax_ts@04 {
	336	compatible = "eeti,egalax_ts";
	337	reg = <0x04>;
	338	interrupt-parent = <&gpio7>;
326cdb16 TH	339	interrupts = <12 2>;
326cdb16 TH	340	wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
e3946fe8	341	};
e3946fe8 TH	342	};
e3946fe8 TH	343
b5f37b76 TH	344	&ldb {
	345	status = "okay";
	346	};
	347
	348	&pcie {
	349	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
	350	status = "okay";
	351
	352	eth1: sky2@8 { /* MAC/PHY on bus 8 */
	353	compatible = "marvell,sky2";
	354	};
	355	};
	356
	357	&ssi1 {
	358	status = "okay";
	359	};
	360
	361	&uart1 {
	362	pinctrl-names = "default";
	363	pinctrl-0 = <&pinctrl_uart1>;
	364	status = "okay";
	365	};
	366
	367	&uart2 {
e3946fe8	368	pinctrl-names = "default";
b5f37b76 TH	369	pinctrl-0 = <&pinctrl_uart2>;
	370	status = "okay";
	371	};
e3946fe8	372
b5f37b76 TH	373	&uart5 {
	374	pinctrl-names = "default";
	375	pinctrl-0 = <&pinctrl_uart5>;
	376	status = "okay";
	377	};
	378
	379	&usbotg {
	380	vbus-supply = <&reg_usb_otg_vbus>;
	381	pinctrl-names = "default";
	382	pinctrl-0 = <&pinctrl_usbotg>;
	383	disable-over-current;
	384	status = "okay";
	385	};
	386
	387	&usbh1 {
	388	vbus-supply = <&reg_usb_h1_vbus>;
	389	status = "okay";
	390	};
	391
	392	&usdhc3 {
	393	pinctrl-names = "default";
	394	pinctrl-0 = <&pinctrl_usdhc3>;
	395	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
	396	vmmc-supply = <&reg_3p3v>;
	397	status = "okay";
	398	};
	399
	400	&iomuxc {
e3946fe8	401	imx6q-gw5400-a {
e3946fe8 TH	402
	403	pinctrl_audmux: audmuxgrp {
	404	fsl,pins = <
	405	MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
	406	MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
	407	MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
	408	MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
b5f37b76	409	MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
e3946fe8 TH	410	>;
	411	};
	412
	413	pinctrl_ecspi1: ecspi1grp {
	414	fsl,pins = <
	415	MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
	416	MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
	417	MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
b5f37b76	418	MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */
e3946fe8 TH	419	>;
	420	};
	421
	422	pinctrl_enet: enetgrp {
	423	fsl,pins = <
c007b3a6 UKK	424	MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
	425	MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
	426	MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
	427	MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
	428	MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
	429	MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
	430	MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
	431	MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
	432	MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
	433	MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
	434	MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
	435	MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
e3946fe8 TH	436	MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
	437	MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
	438	MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
	439	MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
	440	>;
	441	};
	442
b5f37b76 TH	443	pinctrl_gpio_leds: gpioledsgrp {
	444	fsl,pins = <
	445	MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */
	446	MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */
	447	MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */
	448	>;
	449	};
	450
e3946fe8 TH	451	pinctrl_i2c1: i2c1grp {
	452	fsl,pins = <
	453	MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
	454	MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
	455	>;
	456	};
	457
	458	pinctrl_i2c2: i2c2grp {
	459	fsl,pins = <
	460	MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
	461	MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
	462	>;
	463	};
	464
	465	pinctrl_i2c3: i2c3grp {
	466	fsl,pins = <
	467	MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
	468	MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
	469	>;
	470	};
	471
b5f37b76 TH	472	pinctrl_pcie: pciegrp {
	473	fsl,pins = <
	474	MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
	475	MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
	476	>;
	477	};
	478
	479	pinctrl_pps: ppsgrp {
	480	fsl,pins = <
	481	MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */
	482	>;
	483	};
	484
e3946fe8 TH	485	pinctrl_uart1: uart1grp {
	486	fsl,pins = <
	487	MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
	488	MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
	489	>;
	490	};
	491
	492	pinctrl_uart2: uart2grp {
	493	fsl,pins = <
	494	MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
	495	MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
	496	>;
	497	};
	498
	499	pinctrl_uart5: uart5grp {
	500	fsl,pins = <
	501	MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
	502	MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
	503	>;
	504	};
	505
	506	pinctrl_usbotg: usbotggrp {
	507	fsl,pins = <
	508	MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
b5f37b76	509	MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
e3946fe8 TH	510	>;
	511	};
	512
	513	pinctrl_usdhc3: usdhc3grp {
	514	fsl,pins = <
	515	MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
	516	MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
	517	MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
	518	MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
	519	MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
	520	MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
	521	>;
	522	};
	523	};
	524	};