[deliverable/linux.git] / arch / arm / mach-omap1 / board-h2.c

/*
 * linux/arch/arm/mach-omap1/board-h2.c
 *
 * Board specific inits for OMAP-1610 H2
 *
 * Copyright (C) 2001 RidgeRun, Inc.
 * Author: Greg Lonnon <glonnon@ridgerun.com>
 *
 * Copyright (C) 2002 MontaVista Software, Inc.
 *
 * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
 *
 * H2 specific changes and cleanup
 * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/leds.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include <mach/mux.h>
#include <linux/omap-dma.h>
#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
#include "flash.h"

#include <mach/hardware.h>
#include <mach/usb.h>

#include "common.h"
#include "board-h2.h"

/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START		0x04000300

static const unsigned int h2_keymap[] = {
	KEY(0, 0, KEY_LEFT),
	KEY(1, 0, KEY_RIGHT),
	KEY(2, 0, KEY_3),
	KEY(3, 0, KEY_F10),
	KEY(4, 0, KEY_F5),
	KEY(5, 0, KEY_9),
	KEY(0, 1, KEY_DOWN),
	KEY(1, 1, KEY_UP),
	KEY(2, 1, KEY_2),
	KEY(3, 1, KEY_F9),
	KEY(4, 1, KEY_F7),
	KEY(5, 1, KEY_0),
	KEY(0, 2, KEY_ENTER),
	KEY(1, 2, KEY_6),
	KEY(2, 2, KEY_1),
	KEY(3, 2, KEY_F2),
	KEY(4, 2, KEY_F6),
	KEY(5, 2, KEY_HOME),
	KEY(0, 3, KEY_8),
	KEY(1, 3, KEY_5),
	KEY(2, 3, KEY_F12),
	KEY(3, 3, KEY_F3),
	KEY(4, 3, KEY_F8),
	KEY(5, 3, KEY_END),
	KEY(0, 4, KEY_7),
	KEY(1, 4, KEY_4),
	KEY(2, 4, KEY_F11),
	KEY(3, 4, KEY_F1),
	KEY(4, 4, KEY_F4),
	KEY(5, 4, KEY_ESC),
	KEY(0, 5, KEY_F13),
	KEY(1, 5, KEY_F14),
	KEY(2, 5, KEY_F15),
	KEY(3, 5, KEY_F16),
	KEY(4, 5, KEY_SLEEP),
};

static struct mtd_partition h2_nor_partitions[] = {
	/* bootloader (U-Boot, etc) in first sector */
	{
	      .name		= "bootloader",
	      .offset		= 0,
	      .size		= SZ_128K,
	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
	},
	/* bootloader params in the next sector */
	{
	      .name		= "params",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= SZ_128K,
	      .mask_flags	= 0,
	},
	/* kernel */
	{
	      .name		= "kernel",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= SZ_2M,
	      .mask_flags	= 0
	},
	/* file system */
	{
	      .name		= "filesystem",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= MTDPART_SIZ_FULL,
	      .mask_flags	= 0
	}
};

static struct physmap_flash_data h2_nor_data = {
	.width		= 2,
	.set_vpp	= omap1_set_vpp,
	.parts		= h2_nor_partitions,
	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
};

static struct resource h2_nor_resource = {
	/* This is on CS3, wherever it's mapped */
	.flags		= IORESOURCE_MEM,
};

static struct platform_device h2_nor_device = {
	.name		= "physmap-flash",
	.id		= 0,
	.dev		= {
		.platform_data	= &h2_nor_data,
	},
	.num_resources	= 1,
	.resource	= &h2_nor_resource,
};

static struct mtd_partition h2_nand_partitions[] = {
#if 0
	/* REVISIT:  enable these partitions if you make NAND BOOT
	 * work on your H2 (rev C or newer); published versions of
	 * x-load only support P2 and H3.
	 */
	{
		.name		= "xloader",
		.offset		= 0,
		.size		= 64 * 1024,
		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
	},
	{
		.name		= "bootloader",
		.offset		= MTDPART_OFS_APPEND,
		.size		= 256 * 1024,
		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
	},
	{
		.name		= "params",
		.offset		= MTDPART_OFS_APPEND,
		.size		= 192 * 1024,
	},
	{
		.name		= "kernel",
		.offset		= MTDPART_OFS_APPEND,
		.size		= 2 * SZ_1M,
	},
#endif
	{
		.name		= "filesystem",
		.size		= MTDPART_SIZ_FULL,
		.offset		= MTDPART_OFS_APPEND,
	},
};

#define H2_NAND_RB_GPIO_PIN	62

static int h2_nand_dev_ready(struct mtd_info *mtd)
{
	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
}

static struct platform_nand_data h2_nand_platdata = {
	.chip	= {
		.nr_chips		= 1,
		.chip_offset		= 0,
		.nr_partitions		= ARRAY_SIZE(h2_nand_partitions),
		.partitions		= h2_nand_partitions,
		.options		= NAND_SAMSUNG_LP_OPTIONS,
	},
	.ctrl	= {
		.cmd_ctrl	= omap1_nand_cmd_ctl,
		.dev_ready	= h2_nand_dev_ready,
	},
};

static struct resource h2_nand_resource = {
	.flags		= IORESOURCE_MEM,
};

static struct platform_device h2_nand_device = {
	.name		= "gen_nand",
	.id		= 0,
	.dev		= {
		.platform_data	= &h2_nand_platdata,
	},
	.num_resources	= 1,
	.resource	= &h2_nand_resource,
};

static struct smc91x_platdata h2_smc91x_info = {
	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
	.leda	= RPC_LED_100_10,
	.ledb	= RPC_LED_TX_RX,
};

static struct resource h2_smc91x_resources[] = {
	[0] = {
		.start	= OMAP1610_ETHR_START,		/* Physical */
		.end	= OMAP1610_ETHR_START + 0xf,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
	},
};

static struct platform_device h2_smc91x_device = {
	.name		= "smc91x",
	.id		= 0,
	.dev	= {
		.platform_data	= &h2_smc91x_info,
	},
	.num_resources	= ARRAY_SIZE(h2_smc91x_resources),
	.resource	= h2_smc91x_resources,
};

static struct resource h2_kp_resources[] = {
	[0] = {
		.start	= INT_KEYBOARD,
		.end	= INT_KEYBOARD,
		.flags	= IORESOURCE_IRQ,
	},
};

static const struct matrix_keymap_data h2_keymap_data = {
	.keymap		= h2_keymap,
	.keymap_size	= ARRAY_SIZE(h2_keymap),
};

static struct omap_kp_platform_data h2_kp_data = {
	.rows		= 8,
	.cols		= 8,
	.keymap_data	= &h2_keymap_data,
	.rep		= true,
	.delay		= 9,
	.dbounce	= true,
};

static struct platform_device h2_kp_device = {
	.name		= "omap-keypad",
	.id		= -1,
	.dev		= {
		.platform_data = &h2_kp_data,
	},
	.num_resources	= ARRAY_SIZE(h2_kp_resources),
	.resource	= h2_kp_resources,
};

static struct gpio_led h2_gpio_led_pins[] = {
	{
		.name		= "h2:red",
		.default_trigger = "heartbeat",
		.gpio		= 3,
	},
	{
		.name		= "h2:green",
		.default_trigger = "cpu0",
		.gpio		= OMAP_MPUIO(4),
	},
};

static struct gpio_led_platform_data h2_gpio_led_data = {
	.leds		= h2_gpio_led_pins,
	.num_leds	= ARRAY_SIZE(h2_gpio_led_pins),
};

static struct platform_device h2_gpio_leds = {
	.name	= "leds-gpio",
	.id	= -1,
	.dev	= {
		.platform_data = &h2_gpio_led_data,
	},
};

static struct platform_device *h2_devices[] __initdata = {
	&h2_nor_device,
	&h2_nand_device,
	&h2_smc91x_device,
	&h2_kp_device,
	&h2_gpio_leds,
};

static void __init h2_init_smc91x(void)
{
	if (gpio_request(0, "SMC91x irq") < 0) {
		printk("Error requesting gpio 0 for smc91x irq\n");
		return;
	}
}

static int tps_setup(struct i2c_client *client, void *context)
{
	if (!IS_BUILTIN(CONFIG_TPS65010))
		return -ENOSYS;
	
	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);

	return 0;
}

static struct tps65010_board tps_board = {
	.base		= H2_TPS_GPIO_BASE,
	.outmask	= 0x0f,
	.setup		= tps_setup,
};

static struct i2c_board_info __initdata h2_i2c_board_info[] = {
	{
		I2C_BOARD_INFO("tps65010", 0x48),
		.platform_data	= &tps_board,
	}, {
		I2C_BOARD_INFO("isp1301_omap", 0x2d),
	},
};

static struct omap_usb_config h2_usb_config __initdata = {
	/* usb1 has a Mini-AB port and external isp1301 transceiver */
	.otg		= 2,

#if IS_ENABLED(CONFIG_USB_OMAP)
	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
#endif

	.pins[1]	= 3,
};

static struct omap_lcd_config h2_lcd_config __initdata = {
	.ctrl_name	= "internal",
};

static void __init h2_init(void)
{
	h2_init_smc91x();

	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
	 * notice whether a NAND chip is enabled at probe time.
	 *
	 * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
	 * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3.  Try
	 * detecting that in code here, to avoid probing every possible flash
	 * configuration...
	 */
	h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
	h2_nor_resource.end += SZ_32M - 1;

	h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
	h2_nand_resource.end += SZ_4K - 1;
	BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
	gpio_direction_input(H2_NAND_RB_GPIO_PIN);

	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);

	/* MMC:  card detect and WP */
	/* omap_cfg_reg(U19_ARMIO1); */		/* CD */
	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */

	/* Mux pins for keypad */
	omap_cfg_reg(F18_1610_KBC0);
	omap_cfg_reg(D20_1610_KBC1);
	omap_cfg_reg(D19_1610_KBC2);
	omap_cfg_reg(E18_1610_KBC3);
	omap_cfg_reg(C21_1610_KBC4);
	omap_cfg_reg(G18_1610_KBR0);
	omap_cfg_reg(F19_1610_KBR1);
	omap_cfg_reg(H14_1610_KBR2);
	omap_cfg_reg(E20_1610_KBR3);
	omap_cfg_reg(E19_1610_KBR4);
	omap_cfg_reg(N19_1610_KBR5);

	/* GPIO based LEDs */
	omap_cfg_reg(P18_1610_GPIO3);
	omap_cfg_reg(MPUIO4);

	h2_smc91x_resources[1].start = gpio_to_irq(0);
	h2_smc91x_resources[1].end = gpio_to_irq(0);
	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
	omap_serial_init();
	h2_i2c_board_info[0].irq = gpio_to_irq(58);
	h2_i2c_board_info[1].irq = gpio_to_irq(2);
	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
			      ARRAY_SIZE(h2_i2c_board_info));
	omap1_usb_init(&h2_usb_config);
	h2_mmc_init();

	omapfb_set_lcd_config(&h2_lcd_config);
}

MACHINE_START(OMAP_H2, "TI-H2")
	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
	.atag_offset	= 0x100,
	.map_io		= omap16xx_map_io,
	.init_early     = omap1_init_early,
	.init_irq	= omap1_init_irq,
	.handle_irq	= omap1_handle_irq,
	.init_machine	= h2_init,
	.init_late	= omap1_init_late,
	.init_time	= omap1_timer_init,
	.restart	= omap1_restart,
MACHINE_END
Commit	Line	Data
1da177e4	1	/*
dbdf9ced	2	* linux/arch/arm/mach-omap1/board-h2.c
1da177e4 LT	3	*
	4	* Board specific inits for OMAP-1610 H2
	5	*
	6	* Copyright (C) 2001 RidgeRun, Inc.
	7	* Author: Greg Lonnon <glonnon@ridgerun.com>
	8	*
	9	* Copyright (C) 2002 MontaVista Software, Inc.
	10	*
	11	* Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
	12	* Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
	13	*
	14	* H2 specific changes and cleanup
	15	* Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
	16	*
	17	* This program is free software; you can redistribute it and/or modify
	18	* it under the terms of the GNU General Public License version 2 as
	19	* published by the Free Software Foundation.
	20	*/
2f8163ba	21	#include <linux/gpio.h>
1da177e4	22	#include <linux/kernel.h>
d052d1be	23	#include <linux/platform_device.h>
1da177e4	24	#include <linux/delay.h>
8056c6cb	25	#include <linux/i2c.h>
1da177e4	26	#include <linux/mtd/mtd.h>
9b6553cd	27	#include <linux/mtd/nand.h>
1da177e4	28	#include <linux/mtd/partitions.h>
561b036a	29	#include <linux/mtd/physmap.h>
9b6553cd	30	#include <linux/input.h>
6d16bfb5	31	#include <linux/i2c/tps65010.h>
3bc48014	32	#include <linux/smc91x.h>
ddba6c7f	33	#include <linux/omapfb.h>
de6ca33a	34	#include <linux/platform_data/gpio-omap.h>
dafbeadf	35	#include <linux/leds.h>
1da177e4	36
1da177e4 LT	37	#include <asm/mach-types.h>
1da177e4 LT	38	#include <asm/mach/arch.h>
1da177e4 LT	39	#include <asm/mach/map.h>
1da177e4 LT	40
70c494c3	41	#include <mach/mux.h>
45c3eb7d	42	#include <linux/omap-dma.h>
54b693d4	43	#include <mach/tc.h>
2203747c	44	#include <linux/platform_data/keypad-omap.h>
100f9638	45	#include "flash.h"
1da177e4	46
2e3ee9f4	47	#include <mach/hardware.h>
b924b204	48	#include <mach/usb.h>
2e3ee9f4 TL	49
2e3ee9f4 TL	50	#include "common.h"
eb6b0b18 TL	51	#include "board-h2.h"
	52
	53	/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
	54	#define OMAP1610_ETHR_START 0x04000300
	55
da1f026b	56	static const unsigned int h2_keymap[] = {
9b6553cd	57	KEY(0, 0, KEY_LEFT),
da1f026b JK	58	KEY(1, 0, KEY_RIGHT),
	59	KEY(2, 0, KEY_3),
	60	KEY(3, 0, KEY_F10),
	61	KEY(4, 0, KEY_F5),
	62	KEY(5, 0, KEY_9),
	63	KEY(0, 1, KEY_DOWN),
9b6553cd	64	KEY(1, 1, KEY_UP),
da1f026b JK	65	KEY(2, 1, KEY_2),
	66	KEY(3, 1, KEY_F9),
	67	KEY(4, 1, KEY_F7),
	68	KEY(5, 1, KEY_0),
	69	KEY(0, 2, KEY_ENTER),
	70	KEY(1, 2, KEY_6),
9b6553cd	71	KEY(2, 2, KEY_1),
da1f026b JK	72	KEY(3, 2, KEY_F2),
	73	KEY(4, 2, KEY_F6),
	74	KEY(5, 2, KEY_HOME),
	75	KEY(0, 3, KEY_8),
	76	KEY(1, 3, KEY_5),
	77	KEY(2, 3, KEY_F12),
9b6553cd	78	KEY(3, 3, KEY_F3),
da1f026b JK	79	KEY(4, 3, KEY_F8),
	80	KEY(5, 3, KEY_END),
	81	KEY(0, 4, KEY_7),
	82	KEY(1, 4, KEY_4),
	83	KEY(2, 4, KEY_F11),
	84	KEY(3, 4, KEY_F1),
9b6553cd	85	KEY(4, 4, KEY_F4),
da1f026b JK	86	KEY(5, 4, KEY_ESC),
	87	KEY(0, 5, KEY_F13),
	88	KEY(1, 5, KEY_F14),
	89	KEY(2, 5, KEY_F15),
	90	KEY(3, 5, KEY_F16),
	91	KEY(4, 5, KEY_SLEEP),
9b6553cd TL	92	};
	93
	94	static struct mtd_partition h2_nor_partitions[] = {
1da177e4 LT	95	/* bootloader (U-Boot, etc) in first sector */
	96	{
	97	.name = "bootloader",
	98	.offset = 0,
	99	.size = SZ_128K,
	100	.mask_flags = MTD_WRITEABLE, /* force read-only */
	101	},
	102	/* bootloader params in the next sector */
	103	{
	104	.name = "params",
	105	.offset = MTDPART_OFS_APPEND,
	106	.size = SZ_128K,
	107	.mask_flags = 0,
	108	},
	109	/* kernel */
	110	{
	111	.name = "kernel",
	112	.offset = MTDPART_OFS_APPEND,
	113	.size = SZ_2M,
	114	.mask_flags = 0
	115	},
	116	/* file system */
	117	{
	118	.name = "filesystem",
	119	.offset = MTDPART_OFS_APPEND,
	120	.size = MTDPART_SIZ_FULL,
	121	.mask_flags = 0
	122	}
	123	};
	124
561b036a	125	static struct physmap_flash_data h2_nor_data = {
1da177e4	126	.width = 2,
561b036a	127	.set_vpp = omap1_set_vpp,
9b6553cd TL	128	.parts = h2_nor_partitions,
9b6553cd TL	129	.nr_parts = ARRAY_SIZE(h2_nor_partitions),
1da177e4 LT	130	};
1da177e4 LT	131
9b6553cd	132	static struct resource h2_nor_resource = {
7c38cf02	133	/* This is on CS3, wherever it's mapped */
1da177e4 LT	134	.flags = IORESOURCE_MEM,
	135	};
	136
9b6553cd	137	static struct platform_device h2_nor_device = {
561b036a	138	.name = "physmap-flash",
1da177e4 LT	139	.id = 0,
1da177e4 LT	140	.dev = {
9b6553cd	141	.platform_data = &h2_nor_data,
1da177e4 LT	142	},
1da177e4 LT	143	.num_resources = 1,
9b6553cd	144	.resource = &h2_nor_resource,
1da177e4 LT	145	};
1da177e4 LT	146
a524626b TL	147	static struct mtd_partition h2_nand_partitions[] = {
	148	#if 0
	149	/* REVISIT: enable these partitions if you make NAND BOOT
	150	* work on your H2 (rev C or newer); published versions of
	151	* x-load only support P2 and H3.
	152	*/
	153	{
	154	.name = "xloader",
	155	.offset = 0,
	156	.size = 64 * 1024,
	157	.mask_flags = MTD_WRITEABLE, /* force read-only */
	158	},
	159	{
	160	.name = "bootloader",
	161	.offset = MTDPART_OFS_APPEND,
	162	.size = 256 * 1024,
	163	.mask_flags = MTD_WRITEABLE, /* force read-only */
	164	},
	165	{
	166	.name = "params",
	167	.offset = MTDPART_OFS_APPEND,
	168	.size = 192 * 1024,
	169	},
	170	{
	171	.name = "kernel",
	172	.offset = MTDPART_OFS_APPEND,
	173	.size = 2 * SZ_1M,
	174	},
	175	#endif
	176	{
	177	.name = "filesystem",
	178	.size = MTDPART_SIZ_FULL,
	179	.offset = MTDPART_OFS_APPEND,
	180	},
	181	};
	182
414f552a LM	183	#define H2_NAND_RB_GPIO_PIN 62
	184
	185	static int h2_nand_dev_ready(struct mtd_info *mtd)
	186	{
	187	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
	188	}
	189
5db98f75	190	static struct platform_nand_data h2_nand_platdata = {
414f552a LM	191	.chip = {
	192	.nr_chips = 1,
	193	.chip_offset = 0,
	194	.nr_partitions = ARRAY_SIZE(h2_nand_partitions),
	195	.partitions = h2_nand_partitions,
	196	.options = NAND_SAMSUNG_LP_OPTIONS,
414f552a LM	197	},
414f552a LM	198	.ctrl = {
31cde044	199	.cmd_ctrl = omap1_nand_cmd_ctl,
414f552a	200	.dev_ready = h2_nand_dev_ready,
414f552a	201	},
a524626b TL	202	};
	203
	204	static struct resource h2_nand_resource = {
	205	.flags = IORESOURCE_MEM,
	206	};
	207
	208	static struct platform_device h2_nand_device = {
414f552a	209	.name = "gen_nand",
a524626b TL	210	.id = 0,
a524626b TL	211	.dev = {
414f552a	212	.platform_data = &h2_nand_platdata,
a524626b TL	213	},
	214	.num_resources = 1,
	215	.resource = &h2_nand_resource,
	216	};
a524626b	217
3bc48014 LM	218	static struct smc91x_platdata h2_smc91x_info = {
	219	.flags = SMC91X_USE_16BIT \| SMC91X_NOWAIT,
	220	.leda = RPC_LED_100_10,
	221	.ledb = RPC_LED_TX_RX,
	222	};
	223
1da177e4 LT	224	static struct resource h2_smc91x_resources[] = {
	225	[0] = {
	226	.start = OMAP1610_ETHR_START, /* Physical */
	227	.end = OMAP1610_ETHR_START + 0xf,
	228	.flags = IORESOURCE_MEM,
	229	},
	230	[1] = {
e7b3dc7e	231	.flags = IORESOURCE_IRQ \| IORESOURCE_IRQ_LOWEDGE,
1da177e4 LT	232	},
	233	};
	234
	235	static struct platform_device h2_smc91x_device = {
	236	.name = "smc91x",
	237	.id = 0,
3bc48014 LM	238	.dev = {
	239	.platform_data = &h2_smc91x_info,
	240	},
1da177e4 LT	241	.num_resources = ARRAY_SIZE(h2_smc91x_resources),
	242	.resource = h2_smc91x_resources,
	243	};
	244
9b6553cd TL	245	static struct resource h2_kp_resources[] = {
	246	[0] = {
	247	.start = INT_KEYBOARD,
	248	.end = INT_KEYBOARD,
	249	.flags = IORESOURCE_IRQ,
	250	},
	251	};
	252
da1f026b JK	253	static const struct matrix_keymap_data h2_keymap_data = {
	254	.keymap = h2_keymap,
	255	.keymap_size = ARRAY_SIZE(h2_keymap),
	256	};
	257
9b6553cd	258	static struct omap_kp_platform_data h2_kp_data = {
4d24607b KS	259	.rows = 8,
4d24607b KS	260	.cols = 8,
da1f026b JK	261	.keymap_data = &h2_keymap_data,
da1f026b JK	262	.rep = true,
4d24607b	263	.delay = 9,
da1f026b	264	.dbounce = true,
9b6553cd TL	265	};
	266
	267	static struct platform_device h2_kp_device = {
	268	.name = "omap-keypad",
	269	.id = -1,
	270	.dev = {
	271	.platform_data = &h2_kp_data,
	272	},
	273	.num_resources = ARRAY_SIZE(h2_kp_resources),
	274	.resource = h2_kp_resources,
	275	};
	276
dafbeadf BW	277	static struct gpio_led h2_gpio_led_pins[] = {
	278	{
	279	.name = "h2:red",
	280	.default_trigger = "heartbeat",
	281	.gpio = 3,
	282	},
	283	{
	284	.name = "h2:green",
	285	.default_trigger = "cpu0",
	286	.gpio = OMAP_MPUIO(4),
	287	},
	288	};
	289
	290	static struct gpio_led_platform_data h2_gpio_led_data = {
	291	.leds = h2_gpio_led_pins,
	292	.num_leds = ARRAY_SIZE(h2_gpio_led_pins),
	293	};
	294
	295	static struct platform_device h2_gpio_leds = {
	296	.name = "leds-gpio",
	297	.id = -1,
	298	.dev = {
	299	.platform_data = &h2_gpio_led_data,
	300	},
	301	};
	302
1da177e4	303	static struct platform_device *h2_devices[] __initdata = {
9b6553cd	304	&h2_nor_device,
78be6325	305	&h2_nand_device,
1da177e4	306	&h2_smc91x_device,
9b6553cd	307	&h2_kp_device,
dafbeadf	308	&h2_gpio_leds,
1da177e4 LT	309	};
	310
	311	static void __init h2_init_smc91x(void)
	312	{
f2d18fea	313	if (gpio_request(0, "SMC91x irq") < 0) {
1da177e4 LT	314	printk("Error requesting gpio 0 for smc91x irq\n");
	315	return;
	316	}
1da177e4 LT	317	}
1da177e4 LT	318
d8874665 TL	319	static int tps_setup(struct i2c_client client, void context)
d8874665 TL	320	{
0b31c53b AB	321	if (!IS_BUILTIN(CONFIG_TPS65010))
	322	return -ENOSYS;
	323
d8874665 TL	324	tps65010_config_vregs1(TPS_LDO2_ENABLE \| TPS_VLDO2_3_0V \|
	325	TPS_LDO1_ENABLE \| TPS_VLDO1_3_0V);
	326
	327	return 0;
	328	}
	329
	330	static struct tps65010_board tps_board = {
	331	.base = H2_TPS_GPIO_BASE,
	332	.outmask = 0x0f,
	333	.setup = tps_setup,
	334	};
	335
e27a93a9 TL	336	static struct i2c_board_info __initdata h2_i2c_board_info[] = {
e27a93a9 TL	337	{
9221bb1c	338	I2C_BOARD_INFO("tps65010", 0x48),
d8874665	339	.platform_data = &tps_board,
9221bb1c	340	}, {
e27a93a9	341	I2C_BOARD_INFO("isp1301_omap", 0x2d),
e27a93a9 TL	342	},
	343	};
	344
1da177e4 LT	345	static struct omap_usb_config h2_usb_config __initdata = {
	346	/* usb1 has a Mini-AB port and external isp1301 transceiver */
	347	.otg = 2,
	348
77c2f02e	349	#if IS_ENABLED(CONFIG_USB_OMAP)
6e2d4107 DC	350	.hmc_mode = 19, /* 0:host(off) 1:dev\|otg 2:disabled */
6e2d4107 DC	351	/* .hmc_mode = 21,/ / 0:host(off) 1:dev(loopback) 2:host(loopback) */
fcebddb9	352	#elif IS_ENABLED(CONFIG_USB_OHCI_HCD)
1da177e4	353	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
6e2d4107	354	.hmc_mode = 20, /* 1:dev\|otg(off) 1:host 2:disabled */
1da177e4 LT	355	#endif
	356
	357	.pins[1] = 3,
	358	};
	359
3179a019	360	static struct omap_lcd_config h2_lcd_config __initdata = {
3179a019 TL	361	.ctrl_name = "internal",
	362	};
	363
1da177e4 LT	364	static void __init h2_init(void)
1da177e4 LT	365	{
c2cdaffe TL	366	h2_init_smc91x();
c2cdaffe TL	367
9b6553cd TL	368	/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
	369	* to address 0 by a dip switch), NAND on CS2B. The NAND driver will
	370	* notice whether a NAND chip is enabled at probe time.
	371	*
	372	* FIXME revC boards (and H3) support NAND-boot, with a dip switch to
	373	* put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try
	374	* detecting that in code here, to avoid probing every possible flash
	375	* configuration...
7c38cf02	376	*/
9b6553cd TL	377	h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
	378	h2_nor_resource.end += SZ_32M - 1;
	379
a524626b TL	380	h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
a524626b TL	381	h2_nand_resource.end += SZ_4K - 1;
0449410b	382	BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
f2d18fea	383	gpio_direction_input(H2_NAND_RB_GPIO_PIN);
a524626b	384
9b6553cd TL	385	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
9b6553cd TL	386	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
7c38cf02 TL	387
7c38cf02 TL	388	/* MMC: card detect and WP */
6e2d4107	389	/* omap_cfg_reg(U19_ARMIO1); / / CD */
7c38cf02 TL	390	omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */
7c38cf02 TL	391
93c43f25 TL	392	/* Mux pins for keypad */
	393	omap_cfg_reg(F18_1610_KBC0);
	394	omap_cfg_reg(D20_1610_KBC1);
	395	omap_cfg_reg(D19_1610_KBC2);
	396	omap_cfg_reg(E18_1610_KBC3);
	397	omap_cfg_reg(C21_1610_KBC4);
	398	omap_cfg_reg(G18_1610_KBR0);
	399	omap_cfg_reg(F19_1610_KBR1);
	400	omap_cfg_reg(H14_1610_KBR2);
	401	omap_cfg_reg(E20_1610_KBR3);
	402	omap_cfg_reg(E19_1610_KBR4);
	403	omap_cfg_reg(N19_1610_KBR5);
	404
dafbeadf BW	405	/* GPIO based LEDs */
	406	omap_cfg_reg(P18_1610_GPIO3);
	407	omap_cfg_reg(MPUIO4);
	408
46a0a540 TKD	409	h2_smc91x_resources[1].start = gpio_to_irq(0);
46a0a540 TKD	410	h2_smc91x_resources[1].end = gpio_to_irq(0);
1da177e4	411	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
3179a019	412	omap_serial_init();
46a0a540 TKD	413	h2_i2c_board_info[0].irq = gpio_to_irq(58);
46a0a540 TKD	414	h2_i2c_board_info[1].irq = gpio_to_irq(2);
1ed16a86 JN	415	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
1ed16a86 JN	416	ARRAY_SIZE(h2_i2c_board_info));
dd0cdd88	417	omap1_usb_init(&h2_usb_config);
138ab9f8	418	h2_mmc_init();
ddba6c7f TV	419
ddba6c7f TV	420	omapfb_set_lcd_config(&h2_lcd_config);
1da177e4 LT	421	}
1da177e4 LT	422
1da177e4	423	MACHINE_START(OMAP_H2, "TI-H2")
e9dea0c6	424	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
246e389d	425	.atag_offset = 0x100,
7b88e62f TL	426	.map_io = omap16xx_map_io,
7b88e62f TL	427	.init_early = omap1_init_early,
7b88e62f	428	.init_irq = omap1_init_irq,
b694331c	429	.handle_irq = omap1_handle_irq,
e9dea0c6	430	.init_machine = h2_init,
82c3bd03	431	.init_late = omap1_init_late,
6bb27d73	432	.init_time = omap1_timer_init,
baa95883	433	.restart = omap1_restart,
1da177e4	434	MACHINE_END