[deliverable/linux.git] / arch / arm / mach-omap1 / board-h3.c

/*
 * linux/arch/arm/mach-omap1/board-h3.c
 *
 * This file contains OMAP1710 H3 specific code.
 *
 * Copyright (C) 2004 Texas Instruments, Inc.
 * Copyright (C) 2002 MontaVista Software, Inc.
 * Copyright (C) 2001 RidgeRun, Inc.
 * Author: RidgeRun, Inc.
 *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/gpio.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/major.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/errno.h>
#include <linux/workqueue.h>
#include <linux/i2c.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/leds.h>

#include <asm/setup.h>
#include <asm/page.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include <mach/mux.h>
#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
#include <linux/omap-dma.h>
#include "flash.h"

#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/usb.h>

#include "common.h"
#include "board-h3.h"

/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
#define OMAP1710_ETHR_START		0x04000300

#define H3_TS_GPIO	48

static const unsigned int h3_keymap[] = {
	KEY(0, 0, KEY_LEFT),
	KEY(1, 0, KEY_RIGHT),
	KEY(2, 0, KEY_3),
	KEY(3, 0, KEY_F10),
	KEY(4, 0, KEY_F5),
	KEY(5, 0, KEY_9),
	KEY(0, 1, KEY_DOWN),
	KEY(1, 1, KEY_UP),
	KEY(2, 1, KEY_2),
	KEY(3, 1, KEY_F9),
	KEY(4, 1, KEY_F7),
	KEY(5, 1, KEY_0),
	KEY(0, 2, KEY_ENTER),
	KEY(1, 2, KEY_6),
	KEY(2, 2, KEY_1),
	KEY(3, 2, KEY_F2),
	KEY(4, 2, KEY_F6),
	KEY(5, 2, KEY_HOME),
	KEY(0, 3, KEY_8),
	KEY(1, 3, KEY_5),
	KEY(2, 3, KEY_F12),
	KEY(3, 3, KEY_F3),
	KEY(4, 3, KEY_F8),
	KEY(5, 3, KEY_END),
	KEY(0, 4, KEY_7),
	KEY(1, 4, KEY_4),
	KEY(2, 4, KEY_F11),
	KEY(3, 4, KEY_F1),
	KEY(4, 4, KEY_F4),
	KEY(5, 4, KEY_ESC),
	KEY(0, 5, KEY_F13),
	KEY(1, 5, KEY_F14),
	KEY(2, 5, KEY_F15),
	KEY(3, 5, KEY_F16),
	KEY(4, 5, KEY_SLEEP),
};


static struct mtd_partition nor_partitions[] = {
	/* bootloader (U-Boot, etc) in first sector */
	{
	      .name		= "bootloader",
	      .offset		= 0,
	      .size		= SZ_128K,
	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
	},
	/* bootloader params in the next sector */
	{
	      .name		= "params",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= SZ_128K,
	      .mask_flags	= 0,
	},
	/* kernel */
	{
	      .name		= "kernel",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= SZ_2M,
	      .mask_flags	= 0
	},
	/* file system */
	{
	      .name		= "filesystem",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= MTDPART_SIZ_FULL,
	      .mask_flags	= 0
	}
};

static struct physmap_flash_data nor_data = {
	.width		= 2,
	.set_vpp	= omap1_set_vpp,
	.parts		= nor_partitions,
	.nr_parts	= ARRAY_SIZE(nor_partitions),
};

static struct resource nor_resource = {
	/* This is on CS3, wherever it's mapped */
	.flags		= IORESOURCE_MEM,
};

static struct platform_device nor_device = {
	.name		= "physmap-flash",
	.id		= 0,
	.dev		= {
		.platform_data	= &nor_data,
	},
	.num_resources	= 1,
	.resource	= &nor_resource,
};

static struct mtd_partition nand_partitions[] = {
#if 0
	/* REVISIT: enable these partitions if you make NAND BOOT work */
	{
		.name		= "xloader",
		.offset		= 0,
		.size		= 64 * 1024,
		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
	},
	{
		.name		= "bootloader",
		.offset		= MTDPART_OFS_APPEND,
		.size		= 256 * 1024,
		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
	},
	{
		.name		= "params",
		.offset		= MTDPART_OFS_APPEND,
		.size		= 192 * 1024,
	},
	{
		.name		= "kernel",
		.offset		= MTDPART_OFS_APPEND,
		.size		= 2 * SZ_1M,
	},
#endif
	{
		.name		= "filesystem",
		.size		= MTDPART_SIZ_FULL,
		.offset		= MTDPART_OFS_APPEND,
	},
};

#define H3_NAND_RB_GPIO_PIN	10

static int nand_dev_ready(struct mtd_info *mtd)
{
	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
}

static struct platform_nand_data nand_platdata = {
	.chip	= {
		.nr_chips		= 1,
		.chip_offset		= 0,
		.nr_partitions		= ARRAY_SIZE(nand_partitions),
		.partitions		= nand_partitions,
		.options		= NAND_SAMSUNG_LP_OPTIONS,
	},
	.ctrl	= {
		.cmd_ctrl	= omap1_nand_cmd_ctl,
		.dev_ready	= nand_dev_ready,

	},
};

static struct resource nand_resource = {
	.flags		= IORESOURCE_MEM,
};

static struct platform_device nand_device = {
	.name		= "gen_nand",
	.id		= 0,
	.dev		= {
		.platform_data	= &nand_platdata,
	},
	.num_resources	= 1,
	.resource	= &nand_resource,
};

static struct smc91x_platdata smc91x_info = {
	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
	.leda	= RPC_LED_100_10,
	.ledb	= RPC_LED_TX_RX,
};

static struct resource smc91x_resources[] = {
	[0] = {
		.start	= OMAP1710_ETHR_START,		/* Physical */
		.end	= OMAP1710_ETHR_START + 0xf,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
	},
};

static struct platform_device smc91x_device = {
	.name		= "smc91x",
	.id		= 0,
	.dev	= {
		.platform_data	= &smc91x_info,
	},
	.num_resources	= ARRAY_SIZE(smc91x_resources),
	.resource	= smc91x_resources,
};

static void __init h3_init_smc91x(void)
{
	omap_cfg_reg(W15_1710_GPIO40);
	if (gpio_request(40, "SMC91x irq") < 0) {
		printk("Error requesting gpio 40 for smc91x irq\n");
		return;
	}
}

#define GPTIMER_BASE		0xFFFB1400
#define GPTIMER_REGS(x)	(0xFFFB1400 + (x * 0x800))
#define GPTIMER_REGS_SIZE	0x46

static struct resource intlat_resources[] = {
	[0] = {
		.start  = GPTIMER_REGS(0),	      /* Physical */
		.end    = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
		.flags  = IORESOURCE_MEM,
	},
	[1] = {
		.start  = INT_1610_GPTIMER1,
		.end    = INT_1610_GPTIMER1,
		.flags  = IORESOURCE_IRQ,
	},
};

static struct platform_device intlat_device = {
	.name	   = "omap_intlat",
	.id	     = 0,
	.num_resources  = ARRAY_SIZE(intlat_resources),
	.resource       = intlat_resources,
};

static struct resource h3_kp_resources[] = {
	[0] = {
		.start	= INT_KEYBOARD,
		.end	= INT_KEYBOARD,
		.flags	= IORESOURCE_IRQ,
	},
};

static const struct matrix_keymap_data h3_keymap_data = {
	.keymap		= h3_keymap,
	.keymap_size	= ARRAY_SIZE(h3_keymap),
};

static struct omap_kp_platform_data h3_kp_data = {
	.rows		= 8,
	.cols		= 8,
	.keymap_data	= &h3_keymap_data,
	.rep		= true,
	.delay		= 9,
	.dbounce	= true,
};

static struct platform_device h3_kp_device = {
	.name		= "omap-keypad",
	.id		= -1,
	.dev		= {
		.platform_data = &h3_kp_data,
	},
	.num_resources	= ARRAY_SIZE(h3_kp_resources),
	.resource	= h3_kp_resources,
};

static struct platform_device h3_lcd_device = {
	.name		= "lcd_h3",
	.id		= -1,
};

static struct spi_board_info h3_spi_board_info[] __initdata = {
	[0] = {
		.modalias	= "tsc2101",
		.bus_num	= 2,
		.chip_select	= 0,
		.max_speed_hz	= 16000000,
		/* .platform_data	= &tsc_platform_data, */
	},
};

static struct gpio_led h3_gpio_led_pins[] = {
	{
		.name		= "h3:red",
		.default_trigger = "heartbeat",
		.gpio		= 3,
	},
	{
		.name		= "h3:green",
		.default_trigger = "cpu0",
		.gpio		= OMAP_MPUIO(4),
	},
};

static struct gpio_led_platform_data h3_gpio_led_data = {
	.leds		= h3_gpio_led_pins,
	.num_leds	= ARRAY_SIZE(h3_gpio_led_pins),
};

static struct platform_device h3_gpio_leds = {
	.name	= "leds-gpio",
	.id	= -1,
	.dev	= {
		.platform_data = &h3_gpio_led_data,
	},
};

static struct platform_device *devices[] __initdata = {
	&nor_device,
	&nand_device,
        &smc91x_device,
	&intlat_device,
	&h3_kp_device,
	&h3_lcd_device,
	&h3_gpio_leds,
};

static struct omap_usb_config h3_usb_config __initdata = {
	/* usb1 has a Mini-AB port and external isp1301 transceiver */
	.otg	    = 2,

#if IS_ENABLED(CONFIG_USB_OMAP)
	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
#elif IS_ENABLED(CONFIG_USB_OHCI_HCD)
	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
	.hmc_mode       = 20,   /* 1:dev|otg(off) 1:host 2:disabled */
#endif

	.pins[1]	= 3,
};

static struct omap_lcd_config h3_lcd_config __initdata = {
	.ctrl_name	= "internal",
};

static struct i2c_board_info __initdata h3_i2c_board_info[] = {
       {
		I2C_BOARD_INFO("tps65013", 0x48),
       },
	{
		I2C_BOARD_INFO("isp1301_omap", 0x2d),
	},
};

static void __init h3_init(void)
{
	h3_init_smc91x();

	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
	 * notice whether a NAND chip is enabled at probe time.
	 *
	 * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
	 * (which on H2 may be 16bit) on CS3.  Try detecting that in code here,
	 * to avoid probing every possible flash configuration...
	 */
	nor_resource.end = nor_resource.start = omap_cs3_phys();
	nor_resource.end += SZ_32M - 1;

	nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
	nand_resource.end += SZ_4K - 1;
	BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0);
	gpio_direction_input(H3_NAND_RB_GPIO_PIN);

	/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
	omap_cfg_reg(V2_1710_GPIO10);

	/* Mux pins for keypad */
	omap_cfg_reg(F18_1610_KBC0);
	omap_cfg_reg(D20_1610_KBC1);
	omap_cfg_reg(D19_1610_KBC2);
	omap_cfg_reg(E18_1610_KBC3);
	omap_cfg_reg(C21_1610_KBC4);
	omap_cfg_reg(G18_1610_KBR0);
	omap_cfg_reg(F19_1610_KBR1);
	omap_cfg_reg(H14_1610_KBR2);
	omap_cfg_reg(E20_1610_KBR3);
	omap_cfg_reg(E19_1610_KBR4);
	omap_cfg_reg(N19_1610_KBR5);

	/* GPIO based LEDs */
	omap_cfg_reg(P18_1610_GPIO3);
	omap_cfg_reg(MPUIO4);

	smc91x_resources[1].start = gpio_to_irq(40);
	smc91x_resources[1].end = gpio_to_irq(40);
	platform_add_devices(devices, ARRAY_SIZE(devices));
	h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
	spi_register_board_info(h3_spi_board_info,
				ARRAY_SIZE(h3_spi_board_info));
	omap_serial_init();
	h3_i2c_board_info[1].irq = gpio_to_irq(14);
	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
			      ARRAY_SIZE(h3_i2c_board_info));
	omap1_usb_init(&h3_usb_config);
	h3_mmc_init();

	omapfb_set_lcd_config(&h3_lcd_config);
}

MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
	/* Maintainer: Texas Instruments, Inc. */
	.atag_offset	= 0x100,
	.map_io		= omap16xx_map_io,
	.init_early     = omap1_init_early,
	.init_irq	= omap1_init_irq,
	.handle_irq	= omap1_handle_irq,
	.init_machine	= h3_init,
	.init_late	= omap1_init_late,
	.init_time	= omap1_timer_init,
	.restart	= omap1_restart,
MACHINE_END
Commit	Line	Data
1da177e4	1	/*
dbdf9ced	2	* linux/arch/arm/mach-omap1/board-h3.c
1da177e4 LT	3	*
	4	* This file contains OMAP1710 H3 specific code.
	5	*
	6	* Copyright (C) 2004 Texas Instruments, Inc.
	7	* Copyright (C) 2002 MontaVista Software, Inc.
	8	* Copyright (C) 2001 RidgeRun, Inc.
	9	* Author: RidgeRun, Inc.
	10	* Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
	11	*
	12	* This program is free software; you can redistribute it and/or modify
	13	* it under the terms of the GNU General Public License version 2 as
	14	* published by the Free Software Foundation.
	15	*/
2f8163ba	16	#include <linux/gpio.h>
1da177e4 LT	17	#include <linux/types.h>
	18	#include <linux/init.h>
	19	#include <linux/major.h>
	20	#include <linux/kernel.h>
d052d1be	21	#include <linux/platform_device.h>
1da177e4	22	#include <linux/errno.h>
9b6553cd	23	#include <linux/workqueue.h>
8056c6cb	24	#include <linux/i2c.h>
1da177e4	25	#include <linux/mtd/mtd.h>
9b6553cd	26	#include <linux/mtd/nand.h>
1da177e4	27	#include <linux/mtd/partitions.h>
561b036a	28	#include <linux/mtd/physmap.h>
9b6553cd	29	#include <linux/input.h>
0cc0a441	30	#include <linux/spi/spi.h>
6d16bfb5	31	#include <linux/i2c/tps65010.h>
3bc48014	32	#include <linux/smc91x.h>
ddba6c7f	33	#include <linux/omapfb.h>
de6ca33a	34	#include <linux/platform_data/gpio-omap.h>
dafbeadf	35	#include <linux/leds.h>
1da177e4 LT	36
	37	#include <asm/setup.h>
	38	#include <asm/page.h>
1da177e4 LT	39	#include <asm/mach-types.h>
1da177e4 LT	40	#include <asm/mach/arch.h>
1da177e4 LT	41	#include <asm/mach/map.h>
1da177e4 LT	42
70c494c3	43	#include <mach/mux.h>
54b693d4	44	#include <mach/tc.h>
2203747c	45	#include <linux/platform_data/keypad-omap.h>
45c3eb7d	46	#include <linux/omap-dma.h>
100f9638	47	#include "flash.h"
1da177e4	48
2e3ee9f4 TL	49	#include <mach/hardware.h>
2e3ee9f4 TL	50	#include <mach/irqs.h>
b924b204	51	#include <mach/usb.h>
2e3ee9f4 TL	52
2e3ee9f4 TL	53	#include "common.h"
228fe42e TL	54	#include "board-h3.h"
	55
	56	/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
	57	#define OMAP1710_ETHR_START 0x04000300
	58
0cc0a441 DB	59	#define H3_TS_GPIO 48
0cc0a441 DB	60
da1f026b	61	static const unsigned int h3_keymap[] = {
9b6553cd	62	KEY(0, 0, KEY_LEFT),
da1f026b JK	63	KEY(1, 0, KEY_RIGHT),
	64	KEY(2, 0, KEY_3),
	65	KEY(3, 0, KEY_F10),
	66	KEY(4, 0, KEY_F5),
	67	KEY(5, 0, KEY_9),
	68	KEY(0, 1, KEY_DOWN),
9b6553cd	69	KEY(1, 1, KEY_UP),
da1f026b JK	70	KEY(2, 1, KEY_2),
	71	KEY(3, 1, KEY_F9),
	72	KEY(4, 1, KEY_F7),
	73	KEY(5, 1, KEY_0),
	74	KEY(0, 2, KEY_ENTER),
	75	KEY(1, 2, KEY_6),
9b6553cd	76	KEY(2, 2, KEY_1),
da1f026b JK	77	KEY(3, 2, KEY_F2),
	78	KEY(4, 2, KEY_F6),
	79	KEY(5, 2, KEY_HOME),
	80	KEY(0, 3, KEY_8),
	81	KEY(1, 3, KEY_5),
	82	KEY(2, 3, KEY_F12),
9b6553cd	83	KEY(3, 3, KEY_F3),
da1f026b JK	84	KEY(4, 3, KEY_F8),
	85	KEY(5, 3, KEY_END),
	86	KEY(0, 4, KEY_7),
	87	KEY(1, 4, KEY_4),
	88	KEY(2, 4, KEY_F11),
	89	KEY(3, 4, KEY_F1),
9b6553cd	90	KEY(4, 4, KEY_F4),
da1f026b JK	91	KEY(5, 4, KEY_ESC),
	92	KEY(0, 5, KEY_F13),
	93	KEY(1, 5, KEY_F14),
	94	KEY(2, 5, KEY_F15),
	95	KEY(3, 5, KEY_F16),
	96	KEY(4, 5, KEY_SLEEP),
9b6553cd TL	97	};
	98
	99
	100	static struct mtd_partition nor_partitions[] = {
1da177e4 LT	101	/* bootloader (U-Boot, etc) in first sector */
	102	{
	103	.name = "bootloader",
	104	.offset = 0,
	105	.size = SZ_128K,
	106	.mask_flags = MTD_WRITEABLE, /* force read-only */
	107	},
	108	/* bootloader params in the next sector */
	109	{
	110	.name = "params",
	111	.offset = MTDPART_OFS_APPEND,
	112	.size = SZ_128K,
	113	.mask_flags = 0,
	114	},
	115	/* kernel */
	116	{
	117	.name = "kernel",
	118	.offset = MTDPART_OFS_APPEND,
	119	.size = SZ_2M,
	120	.mask_flags = 0
	121	},
	122	/* file system */
	123	{
	124	.name = "filesystem",
	125	.offset = MTDPART_OFS_APPEND,
	126	.size = MTDPART_SIZ_FULL,
	127	.mask_flags = 0
	128	}
	129	};
	130
561b036a	131	static struct physmap_flash_data nor_data = {
1da177e4	132	.width = 2,
561b036a	133	.set_vpp = omap1_set_vpp,
9b6553cd TL	134	.parts = nor_partitions,
9b6553cd TL	135	.nr_parts = ARRAY_SIZE(nor_partitions),
1da177e4 LT	136	};
1da177e4 LT	137
9b6553cd	138	static struct resource nor_resource = {
7c38cf02	139	/* This is on CS3, wherever it's mapped */
1da177e4 LT	140	.flags = IORESOURCE_MEM,
	141	};
	142
9b6553cd	143	static struct platform_device nor_device = {
561b036a	144	.name = "physmap-flash",
1da177e4 LT	145	.id = 0,
1da177e4 LT	146	.dev = {
9b6553cd TL	147	.platform_data = &nor_data,
	148	},
	149	.num_resources = 1,
	150	.resource = &nor_resource,
	151	};
	152
	153	static struct mtd_partition nand_partitions[] = {
	154	#if 0
	155	/* REVISIT: enable these partitions if you make NAND BOOT work */
	156	{
	157	.name = "xloader",
	158	.offset = 0,
	159	.size = 64 * 1024,
	160	.mask_flags = MTD_WRITEABLE, /* force read-only */
	161	},
	162	{
	163	.name = "bootloader",
	164	.offset = MTDPART_OFS_APPEND,
	165	.size = 256 * 1024,
	166	.mask_flags = MTD_WRITEABLE, /* force read-only */
	167	},
	168	{
	169	.name = "params",
	170	.offset = MTDPART_OFS_APPEND,
	171	.size = 192 * 1024,
	172	},
	173	{
	174	.name = "kernel",
	175	.offset = MTDPART_OFS_APPEND,
	176	.size = 2 * SZ_1M,
	177	},
	178	#endif
	179	{
	180	.name = "filesystem",
	181	.size = MTDPART_SIZ_FULL,
	182	.offset = MTDPART_OFS_APPEND,
	183	},
	184	};
	185
414f552a LM	186	#define H3_NAND_RB_GPIO_PIN 10
	187
	188	static int nand_dev_ready(struct mtd_info *mtd)
	189	{
	190	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
	191	}
	192
277a2856	193	static struct platform_nand_data nand_platdata = {
414f552a LM	194	.chip = {
	195	.nr_chips = 1,
	196	.chip_offset = 0,
	197	.nr_partitions = ARRAY_SIZE(nand_partitions),
	198	.partitions = nand_partitions,
	199	.options = NAND_SAMSUNG_LP_OPTIONS,
414f552a LM	200	},
414f552a LM	201	.ctrl = {
31cde044	202	.cmd_ctrl = omap1_nand_cmd_ctl,
414f552a LM	203	.dev_ready = nand_dev_ready,
	204
	205	},
9b6553cd TL	206	};
	207
	208	static struct resource nand_resource = {
	209	.flags = IORESOURCE_MEM,
	210	};
	211
	212	static struct platform_device nand_device = {
414f552a	213	.name = "gen_nand",
9b6553cd TL	214	.id = 0,
9b6553cd TL	215	.dev = {
414f552a	216	.platform_data = &nand_platdata,
1da177e4 LT	217	},
1da177e4 LT	218	.num_resources = 1,
9b6553cd	219	.resource = &nand_resource,
1da177e4 LT	220	};
1da177e4 LT	221
3bc48014 LM	222	static struct smc91x_platdata smc91x_info = {
	223	.flags = SMC91X_USE_16BIT \| SMC91X_NOWAIT,
	224	.leda = RPC_LED_100_10,
	225	.ledb = RPC_LED_TX_RX,
	226	};
	227
1da177e4 LT	228	static struct resource smc91x_resources[] = {
	229	[0] = {
	230	.start = OMAP1710_ETHR_START, /* Physical */
	231	.end = OMAP1710_ETHR_START + 0xf,
	232	.flags = IORESOURCE_MEM,
	233	},
	234	[1] = {
e7b3dc7e	235	.flags = IORESOURCE_IRQ \| IORESOURCE_IRQ_LOWEDGE,
1da177e4 LT	236	},
	237	};
	238
	239	static struct platform_device smc91x_device = {
	240	.name = "smc91x",
	241	.id = 0,
3bc48014 LM	242	.dev = {
	243	.platform_data = &smc91x_info,
	244	},
1da177e4 LT	245	.num_resources = ARRAY_SIZE(smc91x_resources),
	246	.resource = smc91x_resources,
	247	};
	248
c2cdaffe TL	249	static void __init h3_init_smc91x(void)
	250	{
	251	omap_cfg_reg(W15_1710_GPIO40);
	252	if (gpio_request(40, "SMC91x irq") < 0) {
	253	printk("Error requesting gpio 40 for smc91x irq\n");
	254	return;
	255	}
	256	}
	257
1da177e4 LT	258	#define GPTIMER_BASE 0xFFFB1400
	259	#define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800))
	260	#define GPTIMER_REGS_SIZE 0x46
	261
	262	static struct resource intlat_resources[] = {
	263	[0] = {
	264	.start = GPTIMER_REGS(0), /* Physical */
	265	.end = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
	266	.flags = IORESOURCE_MEM,
	267	},
	268	[1] = {
	269	.start = INT_1610_GPTIMER1,
	270	.end = INT_1610_GPTIMER1,
	271	.flags = IORESOURCE_IRQ,
	272	},
	273	};
	274
	275	static struct platform_device intlat_device = {
	276	.name = "omap_intlat",
	277	.id = 0,
	278	.num_resources = ARRAY_SIZE(intlat_resources),
	279	.resource = intlat_resources,
	280	};
	281
9b6553cd TL	282	static struct resource h3_kp_resources[] = {
	283	[0] = {
	284	.start = INT_KEYBOARD,
	285	.end = INT_KEYBOARD,
	286	.flags = IORESOURCE_IRQ,
	287	},
	288	};
	289
da1f026b JK	290	static const struct matrix_keymap_data h3_keymap_data = {
	291	.keymap = h3_keymap,
	292	.keymap_size = ARRAY_SIZE(h3_keymap),
	293	};
	294
9b6553cd	295	static struct omap_kp_platform_data h3_kp_data = {
4d24607b KS	296	.rows = 8,
4d24607b KS	297	.cols = 8,
da1f026b JK	298	.keymap_data = &h3_keymap_data,
da1f026b JK	299	.rep = true,
4d24607b	300	.delay = 9,
da1f026b	301	.dbounce = true,
9b6553cd TL	302	};
	303
	304	static struct platform_device h3_kp_device = {
	305	.name = "omap-keypad",
	306	.id = -1,
	307	.dev = {
	308	.platform_data = &h3_kp_data,
	309	},
	310	.num_resources = ARRAY_SIZE(h3_kp_resources),
	311	.resource = h3_kp_resources,
	312	};
	313
9b6553cd TL	314	static struct platform_device h3_lcd_device = {
	315	.name = "lcd_h3",
	316	.id = -1,
	317	};
	318
0cc0a441 DB	319	static struct spi_board_info h3_spi_board_info[] __initdata = {
	320	[0] = {
	321	.modalias = "tsc2101",
	322	.bus_num = 2,
	323	.chip_select = 0,
0cc0a441 DB	324	.max_speed_hz = 16000000,
	325	/* .platform_data = &tsc_platform_data, */
	326	},
	327	};
	328
dafbeadf BW	329	static struct gpio_led h3_gpio_led_pins[] = {
	330	{
	331	.name = "h3:red",
	332	.default_trigger = "heartbeat",
	333	.gpio = 3,
	334	},
	335	{
	336	.name = "h3:green",
	337	.default_trigger = "cpu0",
	338	.gpio = OMAP_MPUIO(4),
	339	},
	340	};
	341
	342	static struct gpio_led_platform_data h3_gpio_led_data = {
	343	.leds = h3_gpio_led_pins,
	344	.num_leds = ARRAY_SIZE(h3_gpio_led_pins),
	345	};
	346
	347	static struct platform_device h3_gpio_leds = {
	348	.name = "leds-gpio",
	349	.id = -1,
	350	.dev = {
	351	.platform_data = &h3_gpio_led_data,
	352	},
	353	};
	354
1da177e4	355	static struct platform_device *devices[] __initdata = {
9b6553cd TL	356	&nor_device,
9b6553cd TL	357	&nand_device,
1da177e4 LT	358	&smc91x_device,
1da177e4 LT	359	&intlat_device,
9b6553cd TL	360	&h3_kp_device,
9b6553cd TL	361	&h3_lcd_device,
dafbeadf	362	&h3_gpio_leds,
1da177e4 LT	363	};
	364
	365	static struct omap_usb_config h3_usb_config __initdata = {
	366	/* usb1 has a Mini-AB port and external isp1301 transceiver */
	367	.otg = 2,
	368
77c2f02e	369	#if IS_ENABLED(CONFIG_USB_OMAP)
1da177e4	370	.hmc_mode = 19, /* 0:host(off) 1:dev\|otg 2:disabled */
fcebddb9	371	#elif IS_ENABLED(CONFIG_USB_OHCI_HCD)
1da177e4 LT	372	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
	373	.hmc_mode = 20, /* 1:dev\|otg(off) 1:host 2:disabled */
	374	#endif
	375
	376	.pins[1] = 3,
	377	};
	378
3179a019	379	static struct omap_lcd_config h3_lcd_config __initdata = {
3179a019 TL	380	.ctrl_name = "internal",
	381	};
	382
0cc0a441 DB	383	static struct i2c_board_info __initdata h3_i2c_board_info[] = {
0cc0a441 DB	384	{
3760f736	385	I2C_BOARD_INFO("tps65013", 0x48),
0cc0a441	386	},
9df013b3 JD	387	{
9df013b3 JD	388	I2C_BOARD_INFO("isp1301_omap", 0x2d),
9df013b3	389	},
0cc0a441 DB	390	};
0cc0a441 DB	391
1da177e4 LT	392	static void __init h3_init(void)
1da177e4 LT	393	{
c2cdaffe TL	394	h3_init_smc91x();
c2cdaffe TL	395
9b6553cd TL	396	/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
	397	* to address 0 by a dip switch), NAND on CS2B. The NAND driver will
	398	* notice whether a NAND chip is enabled at probe time.
	399	*
	400	* H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
	401	* (which on H2 may be 16bit) on CS3. Try detecting that in code here,
	402	* to avoid probing every possible flash configuration...
	403	*/
	404	nor_resource.end = nor_resource.start = omap_cs3_phys();
	405	nor_resource.end += SZ_32M - 1;
	406
	407	nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
	408	nand_resource.end += SZ_4K - 1;
0449410b	409	BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0);
414f552a	410	gpio_direction_input(H3_NAND_RB_GPIO_PIN);
9b6553cd TL	411
	412	/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
	413	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
	414	omap_cfg_reg(V2_1710_GPIO10);
	415
93c43f25 TL	416	/* Mux pins for keypad */
	417	omap_cfg_reg(F18_1610_KBC0);
	418	omap_cfg_reg(D20_1610_KBC1);
	419	omap_cfg_reg(D19_1610_KBC2);
	420	omap_cfg_reg(E18_1610_KBC3);
	421	omap_cfg_reg(C21_1610_KBC4);
	422	omap_cfg_reg(G18_1610_KBR0);
	423	omap_cfg_reg(F19_1610_KBR1);
	424	omap_cfg_reg(H14_1610_KBR2);
	425	omap_cfg_reg(E20_1610_KBR3);
	426	omap_cfg_reg(E19_1610_KBR4);
	427	omap_cfg_reg(N19_1610_KBR5);
	428
dafbeadf BW	429	/* GPIO based LEDs */
	430	omap_cfg_reg(P18_1610_GPIO3);
	431	omap_cfg_reg(MPUIO4);
	432
46a0a540 TKD	433	smc91x_resources[1].start = gpio_to_irq(40);
46a0a540 TKD	434	smc91x_resources[1].end = gpio_to_irq(40);
9b6553cd	435	platform_add_devices(devices, ARRAY_SIZE(devices));
46a0a540	436	h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
e27a93a9 TL	437	spi_register_board_info(h3_spi_board_info,
e27a93a9 TL	438	ARRAY_SIZE(h3_spi_board_info));
3179a019	439	omap_serial_init();
46a0a540	440	h3_i2c_board_info[1].irq = gpio_to_irq(14);
1ed16a86 JN	441	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
1ed16a86 JN	442	ARRAY_SIZE(h3_i2c_board_info));
dd0cdd88	443	omap1_usb_init(&h3_usb_config);
138ab9f8	444	h3_mmc_init();
ddba6c7f TV	445
ddba6c7f TV	446	omapfb_set_lcd_config(&h3_lcd_config);
1da177e4 LT	447	}
1da177e4 LT	448
1da177e4	449	MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
e9dea0c6	450	/* Maintainer: Texas Instruments, Inc. */
246e389d	451	.atag_offset = 0x100,
7b88e62f TL	452	.map_io = omap16xx_map_io,
7b88e62f TL	453	.init_early = omap1_init_early,
7b88e62f	454	.init_irq = omap1_init_irq,
b694331c	455	.handle_irq = omap1_handle_irq,
e9dea0c6	456	.init_machine = h3_init,
82c3bd03	457	.init_late = omap1_init_late,
6bb27d73	458	.init_time = omap1_timer_init,
baa95883	459	.restart = omap1_restart,
1da177e4	460	MACHINE_END