[deliverable/linux.git] / drivers / hwmon / Kconfig

#
# I2C Sensor chip drivers configuration
#

menu "Hardware Monitoring support"

config HWMON
	tristate "Hardware Monitoring support"
	default y
	help
	  Hardware monitoring devices let you monitor the hardware health
	  of a system. Most modern motherboards include such a device. It
	  can include temperature sensors, voltage sensors, fan speed
	  sensors and various additional features such as the ability to
	  control the speed of the fans.  If you want this support you
	  should say Y here and also to the specific driver(s) for your
	  sensors chip(s) below.

	  This support can also be built as a module.  If so, the module
	  will be called hwmon.

config HWMON_VID
	tristate
	default n

config SENSORS_ADM1021
	tristate "Analog Devices ADM1021 and compatibles"
	depends on HWMON && I2C
	help
	  If you say yes here you get support for Analog Devices ADM1021
	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
	  Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
	  and the XEON processor built-in sensor.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1021.

config SENSORS_ADM1025
	tristate "Analog Devices ADM1025 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for Analog Devices ADM1025
	  and Philips NE1619 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1025.

config SENSORS_ADM1026
	tristate "Analog Devices ADM1026 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for Analog Devices ADM1026
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1026.

config SENSORS_ADM1031
	tristate "Analog Devices ADM1031 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Analog Devices ADM1031
	  and ADM1030 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1031.

config SENSORS_ADM9240
	tristate "Analog Devices ADM9240 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for Analog Devices ADM9240,
	  Dallas DS1780, National Semiconductor LM81 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm9240.

config SENSORS_ASB100
	tristate "Asus ASB100 Bach"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for the ASB100 Bach sensor
	  chip found on some Asus mainboards.

	  This driver can also be built as a module.  If so, the module
	  will be called asb100.

config SENSORS_ATXP1
	tristate "Attansic ATXP1 VID controller"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for the Attansic ATXP1 VID
	  controller.

	  If your board have such a chip, you are able to control your CPU
	  core and other voltages.

	  This driver can also be built as a module.  If so, the module
	  will be called atxp1.

config SENSORS_DS1621
	tristate "Dallas Semiconductor DS1621 and DS1625"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS1621 and DS1625 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called ds1621.

config SENSORS_FSCHER
	tristate "FSC Hermes"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Fujitsu Siemens
	  Computers Hermes sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fscher.

config SENSORS_FSCPOS
	tristate "FSC Poseidon"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Fujitsu Siemens
	  Computers Poseidon sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fscpos.

config SENSORS_GL518SM
	tristate "Genesys Logic GL518SM"
	depends on HWMON && I2C
	help
	  If you say yes here you get support for Genesys Logic GL518SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl518sm.

config SENSORS_GL520SM
	tristate "Genesys Logic GL520SM"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for Genesys Logic GL520SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl520sm.

config SENSORS_IT87
	tristate "ITE IT87xx and compatibles"
	depends on HWMON && I2C
	select I2C_ISA
	select HWMON_VID
	help
	  If you say yes here you get support for ITE IT87xx sensor chips
	  and clones: SiS960.

	  This driver can also be built as a module.  If so, the module
	  will be called it87.

config SENSORS_LM63
	tristate "National Semiconductor LM63"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the National Semiconductor
	  LM63 remote diode digital temperature sensor with integrated fan
	  control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
	  motherboard, among others.

	  This driver can also be built as a module.  If so, the module
	  will be called lm63.

config SENSORS_LM75
	tristate "National Semiconductor LM75 and compatibles"
	depends on HWMON && I2C
	help
	  If you say yes here you get support for National Semiconductor LM75
	  sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
	  9-bit precision mode), and TelCom (now Microchip) TCN75.

	  The DS75 and DS1775 in 10- to 12-bit precision modes will require
	  a force module parameter. The driver will not handle the extra
	  precision anyhow.

	  This driver can also be built as a module.  If so, the module
	  will be called lm75.

config SENSORS_LM77
	tristate "National Semiconductor LM77"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for National Semiconductor LM77
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm77.

config SENSORS_LM78
	tristate "National Semiconductor LM78 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_ISA
	select HWMON_VID
	help
	  If you say yes here you get support for National Semiconductor LM78,
	  LM78-J and LM79.

	  This driver can also be built as a module.  If so, the module
	  will be called lm78.

config SENSORS_LM80
	tristate "National Semiconductor LM80"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for National Semiconductor
	  LM80 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm80.

config SENSORS_LM83
	tristate "National Semiconductor LM83"
	depends on HWMON && I2C
	help
	  If you say yes here you get support for National Semiconductor
	  LM83 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm83.

config SENSORS_LM85
	tristate "National Semiconductor LM85 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for National Semiconductor LM85
	  sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.

	  This driver can also be built as a module.  If so, the module
	  will be called lm85.

config SENSORS_LM87
	tristate "National Semiconductor LM87"
	depends on HWMON && I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for National Semiconductor LM87
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm87.

config SENSORS_LM90
	tristate "National Semiconductor LM90 and compatibles"
	depends on HWMON && I2C
	help
	  If you say yes here you get support for National Semiconductor LM90,
	  LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
	  MAX6658 sensor chips.

	  The Analog Devices ADT7461 sensor chip is also supported, but only
	  if found in ADM1032 compatibility mode.

	  This driver can also be built as a module.  If so, the module
	  will be called lm90.

config SENSORS_LM92
	tristate "National Semiconductor LM92 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for National Semiconductor LM92
	  and Maxim MAX6635 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm92.

config SENSORS_MAX1619
	tristate "Maxim MAX1619 sensor chip"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for MAX1619 sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called max1619.

config SENSORS_PC87360
	tristate "National Semiconductor PC87360 family"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_ISA
	select HWMON_VID
	help
	  If you say yes here you get access to the hardware monitoring
	  functions of the National Semiconductor PC8736x Super-I/O chips.
	  The PC87360, PC87363 and PC87364 only have fan monitoring and
	  control.  The PC87365 and PC87366 additionally have voltage and
	  temperature monitoring.

	  This driver can also be built as a module.  If so, the module
	  will be called pc87360.

config SENSORS_SIS5595
	tristate "Silicon Integrated Systems Corp. SiS5595"
	depends on HWMON && I2C && PCI && EXPERIMENTAL
	select I2C_ISA
	help
	  If you say yes here you get support for the integrated sensors in
	  SiS5595 South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called sis5595.

config SENSORS_SMSC47M1
	tristate "SMSC LPC47M10x and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_ISA
	help
	  If you say yes here you get support for the integrated fan
	  monitoring and control capabilities of the SMSC LPC47B27x,
	  LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47m1.

config SENSORS_SMSC47B397
	tristate "SMSC LPC47B397-NC"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_ISA
	help
	  If you say yes here you get support for the SMSC LPC47B397-NC
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47b397.

config SENSORS_VIA686A
	tristate "VIA686A"
	depends on HWMON && I2C && PCI
	select I2C_ISA
	help
	  If you say yes here you get support for the integrated sensors in
	  Via 686A/B South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called via686a.

config SENSORS_VT8231
	tristate "VT8231"
	depends on HWMON && I2C && PCI && EXPERIMENTAL
	select HWMON_VID
	select I2C_ISA
	help
	  If you say yes here then you get support for the integrated sensors
	  in the VIA VT8231 device.

	  This driver can also be built as a module.  If so, the module
	  will be called vt8231.

config SENSORS_W83781D
	tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
	depends on HWMON && I2C
	select I2C_ISA
	select HWMON_VID
	help
	  If you say yes here you get support for the Winbond W8378x series
	  of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
	  and the similar Asus AS99127F.

	  This driver can also be built as a module.  If so, the module
	  will be called w83781d.

config SENSORS_W83792D
	tristate "Winbond W83792D"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Winbond W83792D chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83792d.

config SENSORS_W83L785TS
	tristate "Winbond W83L785TS-S"
	depends on HWMON && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Winbond W83L785TS-S
	  sensor chip, which is used on the Asus A7N8X, among other
	  motherboards.

	  This driver can also be built as a module.  If so, the module
	  will be called w83l785ts.

config SENSORS_W83627HF
	tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_ISA
	select HWMON_VID
	help
	  If you say yes here you get support for the Winbond W836X7 series
	  of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF

	  This driver can also be built as a module.  If so, the module
	  will be called w83627hf.

config SENSORS_W83627EHF
	tristate "Winbond W83627EHF"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_ISA
	help
	  If you say yes here you get preliminary support for the hardware
	  monitoring functionality of the Winbond W83627EHF Super-I/O chip.
	  Only fan and temperature inputs are supported at the moment, while
	  the chip does much more than that.

	  This driver also supports the W83627EHG, which is the lead-free
	  version of the W83627EHF.

	  This driver can also be built as a module.  If so, the module
	  will be called w83627ehf.

config SENSORS_HDAPS
	tristate "IBM Hard Drive Active Protection System (hdaps)"
	depends on HWMON && INPUT && X86
	default n
	help
	  This driver provides support for the IBM Hard Drive Active Protection
	  System (hdaps), which provides an accelerometer and other misc. data.
	  ThinkPads starting with the R50, T41, and X40 are supported.  The
	  accelerometer data is readable via sysfs.

	  This driver also provides an absolute input class device, allowing
	  the laptop to act as a pinball machine-esque joystick.

	  Say Y here if you have an applicable laptop and want to experience
	  the awesome power of hdaps.

config HWMON_DEBUG_CHIP
	bool "Hardware Monitoring Chip debugging messages"
	depends on HWMON
	default n
	help
	  Say Y here if you want the I2C chip drivers to produce a bunch of
	  debug messages to the system log.  Select this if you are having
	  a problem with I2C support and want to see more of what is going
	  on.

endmenu
Commit	Line	Data
ad2f931d JD	1	#
	2	# I2C Sensor chip drivers configuration
	3	#
	4
	5	menu "Hardware Monitoring support"
	6
	7	config HWMON
	8	tristate "Hardware Monitoring support"
	9	default y
	10	help
	11	Hardware monitoring devices let you monitor the hardware health
	12	of a system. Most modern motherboards include such a device. It
	13	can include temperature sensors, voltage sensors, fan speed
	14	sensors and various additional features such as the ability to
1236441f MH	15	control the speed of the fans. If you want this support you
	16	should say Y here and also to the specific driver(s) for your
	17	sensors chip(s) below.
	18
	19	This support can also be built as a module. If so, the module
	20	will be called hwmon.
ad2f931d	21
303760b4 JD	22	config HWMON_VID
	23	tristate
	24	default n
	25
ad2f931d JD	26	config SENSORS_ADM1021
	27	tristate "Analog Devices ADM1021 and compatibles"
	28	depends on HWMON && I2C
ad2f931d JD	29	help
	30	If you say yes here you get support for Analog Devices ADM1021
	31	and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
	32	Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
	33	and the XEON processor built-in sensor.
	34
	35	This driver can also be built as a module. If so, the module
	36	will be called adm1021.
	37
	38	config SENSORS_ADM1025
	39	tristate "Analog Devices ADM1025 and compatibles"
	40	depends on HWMON && I2C && EXPERIMENTAL
303760b4	41	select HWMON_VID
ad2f931d JD	42	help
	43	If you say yes here you get support for Analog Devices ADM1025
	44	and Philips NE1619 sensor chips.
	45
	46	This driver can also be built as a module. If so, the module
	47	will be called adm1025.
	48
	49	config SENSORS_ADM1026
	50	tristate "Analog Devices ADM1026 and compatibles"
	51	depends on HWMON && I2C && EXPERIMENTAL
303760b4	52	select HWMON_VID
ad2f931d JD	53	help
	54	If you say yes here you get support for Analog Devices ADM1026
	55	sensor chip.
	56
	57	This driver can also be built as a module. If so, the module
	58	will be called adm1026.
	59
	60	config SENSORS_ADM1031
	61	tristate "Analog Devices ADM1031 and compatibles"
	62	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	63	help
	64	If you say yes here you get support for Analog Devices ADM1031
	65	and ADM1030 sensor chips.
	66
	67	This driver can also be built as a module. If so, the module
	68	will be called adm1031.
	69
	70	config SENSORS_ADM9240
	71	tristate "Analog Devices ADM9240 and compatibles"
	72	depends on HWMON && I2C && EXPERIMENTAL
303760b4	73	select HWMON_VID
ad2f931d JD	74	help
	75	If you say yes here you get support for Analog Devices ADM9240,
	76	Dallas DS1780, National Semiconductor LM81 sensor chips.
	77
	78	This driver can also be built as a module. If so, the module
	79	will be called adm9240.
	80
	81	config SENSORS_ASB100
	82	tristate "Asus ASB100 Bach"
	83	depends on HWMON && I2C && EXPERIMENTAL
303760b4	84	select HWMON_VID
ad2f931d JD	85	help
	86	If you say yes here you get support for the ASB100 Bach sensor
	87	chip found on some Asus mainboards.
	88
	89	This driver can also be built as a module. If so, the module
	90	will be called asb100.
	91
	92	config SENSORS_ATXP1
	93	tristate "Attansic ATXP1 VID controller"
	94	depends on HWMON && I2C && EXPERIMENTAL
303760b4	95	select HWMON_VID
ad2f931d JD	96	help
	97	If you say yes here you get support for the Attansic ATXP1 VID
	98	controller.
	99
	100	If your board have such a chip, you are able to control your CPU
	101	core and other voltages.
	102
	103	This driver can also be built as a module. If so, the module
	104	will be called atxp1.
	105
	106	config SENSORS_DS1621
	107	tristate "Dallas Semiconductor DS1621 and DS1625"
	108	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	109	help
	110	If you say yes here you get support for Dallas Semiconductor
	111	DS1621 and DS1625 sensor chips.
	112
	113	This driver can also be built as a module. If so, the module
	114	will be called ds1621.
	115
	116	config SENSORS_FSCHER
	117	tristate "FSC Hermes"
	118	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	119	help
	120	If you say yes here you get support for Fujitsu Siemens
	121	Computers Hermes sensor chips.
	122
	123	This driver can also be built as a module. If so, the module
	124	will be called fscher.
	125
	126	config SENSORS_FSCPOS
	127	tristate "FSC Poseidon"
	128	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	129	help
	130	If you say yes here you get support for Fujitsu Siemens
	131	Computers Poseidon sensor chips.
	132
	133	This driver can also be built as a module. If so, the module
	134	will be called fscpos.
	135
	136	config SENSORS_GL518SM
	137	tristate "Genesys Logic GL518SM"
	138	depends on HWMON && I2C
ad2f931d JD	139	help
	140	If you say yes here you get support for Genesys Logic GL518SM
	141	sensor chips.
	142
	143	This driver can also be built as a module. If so, the module
	144	will be called gl518sm.
	145
	146	config SENSORS_GL520SM
	147	tristate "Genesys Logic GL520SM"
	148	depends on HWMON && I2C && EXPERIMENTAL
303760b4	149	select HWMON_VID
ad2f931d JD	150	help
	151	If you say yes here you get support for Genesys Logic GL520SM
	152	sensor chips.
	153
	154	This driver can also be built as a module. If so, the module
	155	will be called gl520sm.
	156
	157	config SENSORS_IT87
	158	tristate "ITE IT87xx and compatibles"
	159	depends on HWMON && I2C
5042c7d7	160	select I2C_ISA
303760b4	161	select HWMON_VID
ad2f931d JD	162	help
	163	If you say yes here you get support for ITE IT87xx sensor chips
	164	and clones: SiS960.
	165
	166	This driver can also be built as a module. If so, the module
	167	will be called it87.
	168
	169	config SENSORS_LM63
	170	tristate "National Semiconductor LM63"
	171	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	172	help
	173	If you say yes here you get support for the National Semiconductor
	174	LM63 remote diode digital temperature sensor with integrated fan
	175	control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
	176	motherboard, among others.
	177
	178	This driver can also be built as a module. If so, the module
	179	will be called lm63.
	180
	181	config SENSORS_LM75
	182	tristate "National Semiconductor LM75 and compatibles"
	183	depends on HWMON && I2C
ad2f931d JD	184	help
	185	If you say yes here you get support for National Semiconductor LM75
	186	sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
	187	9-bit precision mode), and TelCom (now Microchip) TCN75.
	188
	189	The DS75 and DS1775 in 10- to 12-bit precision modes will require
	190	a force module parameter. The driver will not handle the extra
	191	precision anyhow.
	192
	193	This driver can also be built as a module. If so, the module
	194	will be called lm75.
	195
	196	config SENSORS_LM77
	197	tristate "National Semiconductor LM77"
	198	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	199	help
	200	If you say yes here you get support for National Semiconductor LM77
	201	sensor chips.
	202
	203	This driver can also be built as a module. If so, the module
	204	will be called lm77.
	205
	206	config SENSORS_LM78
	207	tristate "National Semiconductor LM78 and compatibles"
	208	depends on HWMON && I2C && EXPERIMENTAL
5042c7d7	209	select I2C_ISA
19f673ed	210	select HWMON_VID
ad2f931d JD	211	help
	212	If you say yes here you get support for National Semiconductor LM78,
	213	LM78-J and LM79.
	214
	215	This driver can also be built as a module. If so, the module
	216	will be called lm78.
	217
	218	config SENSORS_LM80
	219	tristate "National Semiconductor LM80"
	220	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	221	help
	222	If you say yes here you get support for National Semiconductor
	223	LM80 sensor chips.
	224
	225	This driver can also be built as a module. If so, the module
	226	will be called lm80.
	227
	228	config SENSORS_LM83
	229	tristate "National Semiconductor LM83"
	230	depends on HWMON && I2C
ad2f931d JD	231	help
	232	If you say yes here you get support for National Semiconductor
	233	LM83 sensor chips.
	234
	235	This driver can also be built as a module. If so, the module
	236	will be called lm83.
	237
	238	config SENSORS_LM85
	239	tristate "National Semiconductor LM85 and compatibles"
	240	depends on HWMON && I2C && EXPERIMENTAL
303760b4	241	select HWMON_VID
ad2f931d JD	242	help
	243	If you say yes here you get support for National Semiconductor LM85
	244	sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
	245
	246	This driver can also be built as a module. If so, the module
	247	will be called lm85.
	248
	249	config SENSORS_LM87
	250	tristate "National Semiconductor LM87"
	251	depends on HWMON && I2C && EXPERIMENTAL
303760b4	252	select HWMON_VID
ad2f931d JD	253	help
	254	If you say yes here you get support for National Semiconductor LM87
	255	sensor chips.
	256
	257	This driver can also be built as a module. If so, the module
	258	will be called lm87.
	259
	260	config SENSORS_LM90
	261	tristate "National Semiconductor LM90 and compatibles"
	262	depends on HWMON && I2C
ad2f931d JD	263	help
	264	If you say yes here you get support for National Semiconductor LM90,
	265	LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
	266	MAX6658 sensor chips.
	267
	268	The Analog Devices ADT7461 sensor chip is also supported, but only
	269	if found in ADM1032 compatibility mode.
	270
	271	This driver can also be built as a module. If so, the module
	272	will be called lm90.
	273
	274	config SENSORS_LM92
	275	tristate "National Semiconductor LM92 and compatibles"
	276	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	277	help
	278	If you say yes here you get support for National Semiconductor LM92
	279	and Maxim MAX6635 sensor chips.
	280
	281	This driver can also be built as a module. If so, the module
	282	will be called lm92.
	283
	284	config SENSORS_MAX1619
	285	tristate "Maxim MAX1619 sensor chip"
	286	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	287	help
	288	If you say yes here you get support for MAX1619 sensor chip.
	289
	290	This driver can also be built as a module. If so, the module
	291	will be called max1619.
	292
	293	config SENSORS_PC87360
	294	tristate "National Semiconductor PC87360 family"
	295	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d	296	select I2C_ISA
303760b4	297	select HWMON_VID
ad2f931d JD	298	help
	299	If you say yes here you get access to the hardware monitoring
	300	functions of the National Semiconductor PC8736x Super-I/O chips.
	301	The PC87360, PC87363 and PC87364 only have fan monitoring and
	302	control. The PC87365 and PC87366 additionally have voltage and
	303	temperature monitoring.
	304
	305	This driver can also be built as a module. If so, the module
	306	will be called pc87360.
	307
	308	config SENSORS_SIS5595
	309	tristate "Silicon Integrated Systems Corp. SiS5595"
	310	depends on HWMON && I2C && PCI && EXPERIMENTAL
ad2f931d JD	311	select I2C_ISA
	312	help
	313	If you say yes here you get support for the integrated sensors in
	314	SiS5595 South Bridges.
	315
	316	This driver can also be built as a module. If so, the module
	317	will be called sis5595.
	318
	319	config SENSORS_SMSC47M1
	320	tristate "SMSC LPC47M10x and compatibles"
	321	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	322	select I2C_ISA
	323	help
	324	If you say yes here you get support for the integrated fan
	325	monitoring and control capabilities of the SMSC LPC47B27x,
	326	LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
	327
	328	This driver can also be built as a module. If so, the module
	329	will be called smsc47m1.
	330
	331	config SENSORS_SMSC47B397
	332	tristate "SMSC LPC47B397-NC"
	333	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	334	select I2C_ISA
	335	help
	336	If you say yes here you get support for the SMSC LPC47B397-NC
	337	sensor chip.
	338
	339	This driver can also be built as a module. If so, the module
	340	will be called smsc47b397.
	341
	342	config SENSORS_VIA686A
	343	tristate "VIA686A"
	344	depends on HWMON && I2C && PCI
ad2f931d JD	345	select I2C_ISA
	346	help
	347	If you say yes here you get support for the integrated sensors in
	348	Via 686A/B South Bridges.
	349
	350	This driver can also be built as a module. If so, the module
	351	will be called via686a.
	352
1de9e371 RL	353	config SENSORS_VT8231
	354	tristate "VT8231"
	355	depends on HWMON && I2C && PCI && EXPERIMENTAL
	356	select HWMON_VID
	357	select I2C_ISA
	358	help
	359	If you say yes here then you get support for the integrated sensors
	360	in the VIA VT8231 device.
	361
	362	This driver can also be built as a module. If so, the module
	363	will be called vt8231.
	364
ad2f931d JD	365	config SENSORS_W83781D
	366	tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
	367	depends on HWMON && I2C
5042c7d7	368	select I2C_ISA
303760b4	369	select HWMON_VID
ad2f931d JD	370	help
	371	If you say yes here you get support for the Winbond W8378x series
	372	of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
	373	and the similar Asus AS99127F.
	374
	375	This driver can also be built as a module. If so, the module
	376	will be called w83781d.
	377
5563e27d M	378	config SENSORS_W83792D
	379	tristate "Winbond W83792D"
	380	depends on HWMON && I2C && EXPERIMENTAL
5563e27d M	381	help
	382	If you say yes here you get support for the Winbond W83792D chip.
	383
	384	This driver can also be built as a module. If so, the module
	385	will be called w83792d.
	386
ad2f931d JD	387	config SENSORS_W83L785TS
	388	tristate "Winbond W83L785TS-S"
	389	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	390	help
	391	If you say yes here you get support for the Winbond W83L785TS-S
	392	sensor chip, which is used on the Asus A7N8X, among other
	393	motherboards.
	394
	395	This driver can also be built as a module. If so, the module
	396	will be called w83l785ts.
	397
	398	config SENSORS_W83627HF
	399	tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
	400	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d	401	select I2C_ISA
303760b4	402	select HWMON_VID
ad2f931d JD	403	help
	404	If you say yes here you get support for the Winbond W836X7 series
	405	of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
	406
	407	This driver can also be built as a module. If so, the module
	408	will be called w83627hf.
	409
	410	config SENSORS_W83627EHF
	411	tristate "Winbond W83627EHF"
	412	depends on HWMON && I2C && EXPERIMENTAL
ad2f931d JD	413	select I2C_ISA
	414	help
	415	If you say yes here you get preliminary support for the hardware
	416	monitoring functionality of the Winbond W83627EHF Super-I/O chip.
	417	Only fan and temperature inputs are supported at the moment, while
	418	the chip does much more than that.
	419
8dd2d2ca JD	420	This driver also supports the W83627EHG, which is the lead-free
	421	version of the W83627EHF.
	422
ad2f931d JD	423	This driver can also be built as a module. If so, the module
	424	will be called w83627ehf.
	425
860e1d6b RL	426	config SENSORS_HDAPS
	427	tristate "IBM Hard Drive Active Protection System (hdaps)"
	428	depends on HWMON && INPUT && X86
	429	default n
	430	help
	431	This driver provides support for the IBM Hard Drive Active Protection
	432	System (hdaps), which provides an accelerometer and other misc. data.
4c87b74c RL	433	ThinkPads starting with the R50, T41, and X40 are supported. The
4c87b74c RL	434	accelerometer data is readable via sysfs.
860e1d6b	435
4c87b74c RL	436	This driver also provides an absolute input class device, allowing
4c87b74c RL	437	the laptop to act as a pinball machine-esque joystick.
860e1d6b RL	438
	439	Say Y here if you have an applicable laptop and want to experience
	440	the awesome power of hdaps.
	441
ad2f931d JD	442	config HWMON_DEBUG_CHIP
	443	bool "Hardware Monitoring Chip debugging messages"
	444	depends on HWMON
	445	default n
	446	help
	447	Say Y here if you want the I2C chip drivers to produce a bunch of
	448	debug messages to the system log. Select this if you are having
	449	a problem with I2C support and want to see more of what is going
	450	on.
	451
	452	endmenu