drivers:net: dma_alloc_coherent: use __GFP_ZERO instead of memset(, 0)
[deliverable/linux.git] / drivers / net / wireless / iwlegacy / common.h
CommitLineData
be663ab6
WYG
1/******************************************************************************
2 *
e94a4099 3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
be663ab6 4 *
e94a4099
SG
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
be663ab6
WYG
7 * published by the Free Software Foundation.
8 *
e94a4099
SG
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
be663ab6 13 *
e94a4099
SG
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
be663ab6 17 *
e94a4099
SG
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
be663ab6
WYG
20 *
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24 *
e94a4099
SG
25 *****************************************************************************/
26#ifndef __il_core_h__
27#define __il_core_h__
28
29#include <linux/interrupt.h>
e7392364 30#include <linux/pci.h> /* for struct pci_device_id */
e94a4099
SG
31#include <linux/kernel.h>
32#include <linux/leds.h>
33#include <linux/wait.h>
17d4eca6 34#include <linux/io.h>
47ef694d 35#include <net/mac80211.h>
e94a4099
SG
36#include <net/ieee80211_radiotap.h>
37
99412002 38#include "commands.h"
e94a4099 39#include "csr.h"
e8c39d4e 40#include "prph.h"
e94a4099
SG
41
42struct il_host_cmd;
43struct il_cmd;
44struct il_tx_queue;
45
f02579e3
SG
46#define IL_ERR(f, a...) dev_err(&il->pci_dev->dev, f, ## a)
47#define IL_WARN(f, a...) dev_warn(&il->pci_dev->dev, f, ## a)
48#define IL_INFO(f, a...) dev_info(&il->pci_dev->dev, f, ## a)
49
e94a4099
SG
50#define RX_QUEUE_SIZE 256
51#define RX_QUEUE_MASK 255
52#define RX_QUEUE_SIZE_LOG 8
53
54/*
55 * RX related structures and functions
56 */
57#define RX_FREE_BUFFERS 64
58#define RX_LOW_WATERMARK 8
59
60#define U32_PAD(n) ((4-(n))&0x3)
61
62/* CT-KILL constants */
e7392364 63#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
e94a4099
SG
64
65/* Default noise level to report when noise measurement is not available.
66 * This may be because we're:
67 * 1) Not associated (4965, no beacon stats being sent to driver)
68 * 2) Scanning (noise measurement does not apply to associated channel)
69 * 3) Receiving CCK (3945 delivers noise info only for OFDM frames)
70 * Use default noise value of -127 ... this is below the range of measurable
71 * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
72 * Also, -127 works better than 0 when averaging frames with/without
73 * noise info (e.g. averaging might be done in app); measured dBm values are
74 * always negative ... using a negative value as the default keeps all
75 * averages within an s8's (used in some apps) range of negative values. */
76#define IL_NOISE_MEAS_NOT_AVAILABLE (-127)
77
78/*
79 * RTS threshold here is total size [2347] minus 4 FCS bytes
80 * Per spec:
81 * a value of 0 means RTS on all data/management packets
82 * a value > max MSDU size means no RTS
83 * else RTS for data/management frames where MPDU is larger
84 * than RTS value.
85 */
86#define DEFAULT_RTS_THRESHOLD 2347U
87#define MIN_RTS_THRESHOLD 0U
88#define MAX_RTS_THRESHOLD 2347U
89#define MAX_MSDU_SIZE 2304U
90#define MAX_MPDU_SIZE 2346U
91#define DEFAULT_BEACON_INTERVAL 100U
92#define DEFAULT_SHORT_RETRY_LIMIT 7U
93#define DEFAULT_LONG_RETRY_LIMIT 4U
94
95struct il_rx_buf {
96 dma_addr_t page_dma;
97 struct page *page;
98 struct list_head list;
99};
100
101#define rxb_addr(r) page_address(r->page)
102
103/* defined below */
104struct il_device_cmd;
105
106struct il_cmd_meta {
107 /* only for SYNC commands, iff the reply skb is wanted */
108 struct il_host_cmd *source;
109 /*
110 * only for ASYNC commands
111 * (which is somewhat stupid -- look at common.c for instance
112 * which duplicates a bunch of code because the callback isn't
113 * invoked for SYNC commands, if it were and its result passed
114 * through it would be simpler...)
115 */
1722f8e1
SG
116 void (*callback) (struct il_priv *il, struct il_device_cmd *cmd,
117 struct il_rx_pkt *pkt);
e94a4099
SG
118
119 /* The CMD_SIZE_HUGE flag bit indicates that the command
120 * structure is stored at the end of the shared queue memory. */
121 u32 flags;
122
e7392364
SG
123 DEFINE_DMA_UNMAP_ADDR(mapping);
124 DEFINE_DMA_UNMAP_LEN(len);
e94a4099
SG
125};
126
127/*
128 * Generic queue structure
129 *
130 * Contains common data for Rx and Tx queues
131 */
132struct il_queue {
e7392364
SG
133 int n_bd; /* number of BDs in this queue */
134 int write_ptr; /* 1-st empty entry (idx) host_w */
135 int read_ptr; /* last used entry (idx) host_r */
e94a4099 136 /* use for monitoring and recovering the stuck queue */
e7392364
SG
137 dma_addr_t dma_addr; /* physical addr for BD's */
138 int n_win; /* safe queue win */
e94a4099 139 u32 id;
e7392364
SG
140 int low_mark; /* low watermark, resume queue if free
141 * space more than this */
142 int high_mark; /* high watermark, stop queue if free
143 * space less than this */
e94a4099
SG
144};
145
e94a4099
SG
146/**
147 * struct il_tx_queue - Tx Queue for DMA
148 * @q: generic Rx/Tx queue descriptor
149 * @bd: base of circular buffer of TFDs
150 * @cmd: array of command/TX buffer pointers
151 * @meta: array of meta data for each command/tx buffer
152 * @dma_addr_cmd: physical address of cmd/tx buffer array
00ea99e1 153 * @skbs: array of per-TFD socket buffer pointers
e94a4099
SG
154 * @time_stamp: time (in jiffies) of last read_ptr change
155 * @need_update: indicates need to update read/write idx
156 * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
157 *
158 * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
159 * descriptors) and required locking structures.
160 */
161#define TFD_TX_CMD_SLOTS 256
162#define TFD_CMD_SLOTS 32
163
164struct il_tx_queue {
165 struct il_queue q;
166 void *tfds;
167 struct il_device_cmd **cmd;
168 struct il_cmd_meta *meta;
00ea99e1 169 struct sk_buff **skbs;
e94a4099
SG
170 unsigned long time_stamp;
171 u8 need_update;
172 u8 sched_retry;
173 u8 active;
174 u8 swq_id;
175};
176
47ef694d
SG
177/*
178 * EEPROM access time values:
179 *
180 * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG.
181 * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1).
182 * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec.
183 * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG.
184 */
e7392364 185#define IL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */
47ef694d 186
e7392364
SG
187#define IL_EEPROM_SEM_TIMEOUT 10 /* microseconds */
188#define IL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
47ef694d
SG
189
190/*
191 * Regulatory channel usage flags in EEPROM struct il4965_eeprom_channel.flags.
192 *
193 * IBSS and/or AP operation is allowed *only* on those channels with
194 * (VALID && IBSS && ACTIVE && !RADAR). This restriction is in place because
195 * RADAR detection is not supported by the 4965 driver, but is a
196 * requirement for establishing a new network for legal operation on channels
197 * requiring RADAR detection or restricting ACTIVE scanning.
198 *
199 * NOTE: "WIDE" flag does not indicate anything about "HT40" 40 MHz channels.
200 * It only indicates that 20 MHz channel use is supported; HT40 channel
201 * usage is indicated by a separate set of regulatory flags for each
202 * HT40 channel pair.
203 *
204 * NOTE: Using a channel inappropriately will result in a uCode error!
205 */
206#define IL_NUM_TX_CALIB_GROUPS 5
207enum {
208 EEPROM_CHANNEL_VALID = (1 << 0), /* usable for this SKU/geo */
e7392364 209 EEPROM_CHANNEL_IBSS = (1 << 1), /* usable as an IBSS channel */
47ef694d
SG
210 /* Bit 2 Reserved */
211 EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */
212 EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */
e7392364 213 EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */
47ef694d
SG
214 /* Bit 6 Reserved (was Narrow Channel) */
215 EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */
216};
217
218/* SKU Capabilities */
219/* 3945 only */
220#define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE (1 << 0)
221#define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1)
222
223/* *regulatory* channel data format in eeprom, one for each channel.
224 * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */
225struct il_eeprom_channel {
226 u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */
227 s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */
228} __packed;
229
230/* 3945 Specific */
231#define EEPROM_3945_EEPROM_VERSION (0x2f)
232
233/* 4965 has two radio transmitters (and 3 radio receivers) */
234#define EEPROM_TX_POWER_TX_CHAINS (2)
235
236/* 4965 has room for up to 8 sets of txpower calibration data */
237#define EEPROM_TX_POWER_BANDS (8)
238
239/* 4965 factory calibration measures txpower gain settings for
240 * each of 3 target output levels */
241#define EEPROM_TX_POWER_MEASUREMENTS (3)
242
243/* 4965 Specific */
244/* 4965 driver does not work with txpower calibration version < 5 */
245#define EEPROM_4965_TX_POWER_VERSION (5)
246#define EEPROM_4965_EEPROM_VERSION (0x2f)
e7392364
SG
247#define EEPROM_4965_CALIB_VERSION_OFFSET (2*0xB6) /* 2 bytes */
248#define EEPROM_4965_CALIB_TXPOWER_OFFSET (2*0xE8) /* 48 bytes */
249#define EEPROM_4965_BOARD_REVISION (2*0x4F) /* 2 bytes */
250#define EEPROM_4965_BOARD_PBA (2*0x56+1) /* 9 bytes */
47ef694d
SG
251
252/* 2.4 GHz */
253extern const u8 il_eeprom_band_1[14];
254
255/*
256 * factory calibration data for one txpower level, on one channel,
257 * measured on one of the 2 tx chains (radio transmitter and associated
258 * antenna). EEPROM contains:
259 *
260 * 1) Temperature (degrees Celsius) of device when measurement was made.
261 *
262 * 2) Gain table idx used to achieve the target measurement power.
263 * This refers to the "well-known" gain tables (see 4965.h).
264 *
265 * 3) Actual measured output power, in half-dBm ("34" = 17 dBm).
266 *
267 * 4) RF power amplifier detector level measurement (not used).
268 */
269struct il_eeprom_calib_measure {
270 u8 temperature; /* Device temperature (Celsius) */
271 u8 gain_idx; /* Index into gain table */
272 u8 actual_pow; /* Measured RF output power, half-dBm */
273 s8 pa_det; /* Power amp detector level (not used) */
274} __packed;
275
47ef694d
SG
276/*
277 * measurement set for one channel. EEPROM contains:
278 *
279 * 1) Channel number measured
280 *
281 * 2) Measurements for each of 3 power levels for each of 2 radio transmitters
282 * (a.k.a. "tx chains") (6 measurements altogether)
283 */
284struct il_eeprom_calib_ch_info {
285 u8 ch_num;
286 struct il_eeprom_calib_measure
e7392364
SG
287 measurements[EEPROM_TX_POWER_TX_CHAINS]
288 [EEPROM_TX_POWER_MEASUREMENTS];
47ef694d
SG
289} __packed;
290
291/*
292 * txpower subband info.
293 *
294 * For each frequency subband, EEPROM contains the following:
295 *
296 * 1) First and last channels within range of the subband. "0" values
297 * indicate that this sample set is not being used.
298 *
299 * 2) Sample measurement sets for 2 channels close to the range endpoints.
300 */
301struct il_eeprom_calib_subband_info {
e7392364
SG
302 u8 ch_from; /* channel number of lowest channel in subband */
303 u8 ch_to; /* channel number of highest channel in subband */
47ef694d
SG
304 struct il_eeprom_calib_ch_info ch1;
305 struct il_eeprom_calib_ch_info ch2;
306} __packed;
307
47ef694d
SG
308/*
309 * txpower calibration info. EEPROM contains:
310 *
311 * 1) Factory-measured saturation power levels (maximum levels at which
312 * tx power amplifier can output a signal without too much distortion).
313 * There is one level for 2.4 GHz band and one for 5 GHz band. These
314 * values apply to all channels within each of the bands.
315 *
316 * 2) Factory-measured power supply voltage level. This is assumed to be
317 * constant (i.e. same value applies to all channels/bands) while the
318 * factory measurements are being made.
319 *
320 * 3) Up to 8 sets of factory-measured txpower calibration values.
321 * These are for different frequency ranges, since txpower gain
322 * characteristics of the analog radio circuitry vary with frequency.
323 *
324 * Not all sets need to be filled with data;
325 * struct il_eeprom_calib_subband_info contains range of channels
326 * (0 if unused) for each set of data.
327 */
328struct il_eeprom_calib_info {
329 u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */
330 u8 saturation_power52; /* half-dBm */
331 __le16 voltage; /* signed */
e7392364 332 struct il_eeprom_calib_subband_info band_info[EEPROM_TX_POWER_BANDS];
47ef694d
SG
333} __packed;
334
47ef694d
SG
335/* General */
336#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */
337#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */
338#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */
339#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */
340#define EEPROM_VERSION (2*0x44) /* 2 bytes */
341#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */
342#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */
343#define EEPROM_WOWLAN_MODE (2*0x47) /* 2 bytes */
344#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */
345#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */
346
347/* The following masks are to be applied on EEPROM_RADIO_CONFIG */
e7392364
SG
348#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */
349#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */
350#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */
351#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */
352#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */
353#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
47ef694d
SG
354
355#define EEPROM_3945_RF_CFG_TYPE_MAX 0x0
356#define EEPROM_4965_RF_CFG_TYPE_MAX 0x1
357
358/*
359 * Per-channel regulatory data.
360 *
361 * Each channel that *might* be supported by iwl has a fixed location
362 * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
363 * txpower (MSB).
364 *
365 * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz)
366 * channels (only for 4965, not supported by 3945) appear later in the EEPROM.
367 *
368 * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
369 */
e7392364 370#define EEPROM_REGULATORY_SKU_ID (2*0x60) /* 4 bytes */
47ef694d
SG
371#define EEPROM_REGULATORY_BAND_1 (2*0x62) /* 2 bytes */
372#define EEPROM_REGULATORY_BAND_1_CHANNELS (2*0x63) /* 28 bytes */
373
374/*
375 * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
376 * 5.0 GHz channels 7, 8, 11, 12, 16
377 * (4915-5080MHz) (none of these is ever supported)
378 */
379#define EEPROM_REGULATORY_BAND_2 (2*0x71) /* 2 bytes */
380#define EEPROM_REGULATORY_BAND_2_CHANNELS (2*0x72) /* 26 bytes */
381
382/*
383 * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
384 * (5170-5320MHz)
385 */
386#define EEPROM_REGULATORY_BAND_3 (2*0x7F) /* 2 bytes */
387#define EEPROM_REGULATORY_BAND_3_CHANNELS (2*0x80) /* 24 bytes */
388
389/*
390 * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
391 * (5500-5700MHz)
392 */
393#define EEPROM_REGULATORY_BAND_4 (2*0x8C) /* 2 bytes */
394#define EEPROM_REGULATORY_BAND_4_CHANNELS (2*0x8D) /* 22 bytes */
395
396/*
397 * 5.7 GHz channels 145, 149, 153, 157, 161, 165
398 * (5725-5825MHz)
399 */
400#define EEPROM_REGULATORY_BAND_5 (2*0x98) /* 2 bytes */
401#define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */
402
403/*
404 * 2.4 GHz HT40 channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11)
405 *
406 * The channel listed is the center of the lower 20 MHz half of the channel.
407 * The overall center frequency is actually 2 channels (10 MHz) above that,
408 * and the upper half of each HT40 channel is centered 4 channels (20 MHz) away
409 * from the lower half; e.g. the upper half of HT40 channel 1 is channel 5,
410 * and the overall HT40 channel width centers on channel 3.
411 *
412 * NOTE: The RXON command uses 20 MHz channel numbers to specify the
413 * control channel to which to tune. RXON also specifies whether the
414 * control channel is the upper or lower half of a HT40 channel.
415 *
416 * NOTE: 4965 does not support HT40 channels on 2.4 GHz.
417 */
418#define EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS (2*0xA0) /* 14 bytes */
419
420/*
421 * 5.2 GHz HT40 channels 36 (40), 44 (48), 52 (56), 60 (64),
422 * 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161)
423 */
424#define EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS (2*0xA8) /* 22 bytes */
425
426#define EEPROM_REGULATORY_BAND_NO_HT40 (0)
427
47ef694d
SG
428int il_eeprom_init(struct il_priv *il);
429void il_eeprom_free(struct il_priv *il);
e7392364 430const u8 *il_eeprom_query_addr(const struct il_priv *il, size_t offset);
47ef694d
SG
431u16 il_eeprom_query16(const struct il_priv *il, size_t offset);
432int il_init_channel_map(struct il_priv *il);
433void il_free_channel_map(struct il_priv *il);
e7392364
SG
434const struct il_channel_info *il_get_channel_info(const struct il_priv *il,
435 enum ieee80211_band band,
436 u16 channel);
47ef694d 437
e94a4099
SG
438#define IL_NUM_SCAN_RATES (2)
439
440struct il4965_channel_tgd_info {
441 u8 type;
442 s8 max_power;
443};
444
445struct il4965_channel_tgh_info {
446 s64 last_radar_time;
447};
448
449#define IL4965_MAX_RATE (33)
450
451struct il3945_clip_group {
452 /* maximum power level to prevent clipping for each rate, derived by
453 * us from this band's saturation power in EEPROM */
454 const s8 clip_powers[IL_MAX_RATES];
455};
456
457/* current Tx power values to use, one for each rate for each channel.
458 * requested power is limited by:
459 * -- regulatory EEPROM limits for this channel
460 * -- hardware capabilities (clip-powers)
461 * -- spectrum management
462 * -- user preference (e.g. iwconfig)
463 * when requested power is set, base power idx must also be set. */
464struct il3945_channel_power_info {
465 struct il3945_tx_power tpc; /* actual radio and DSP gain settings */
466 s8 power_table_idx; /* actual (compenst'd) idx into gain table */
467 s8 base_power_idx; /* gain idx for power at factory temp. */
468 s8 requested_power; /* power (dBm) requested for this chnl/rate */
469};
470
471/* current scan Tx power values to use, one for each scan rate for each
472 * channel. */
473struct il3945_scan_power_info {
474 struct il3945_tx_power tpc; /* actual radio and DSP gain settings */
475 s8 power_table_idx; /* actual (compenst'd) idx into gain table */
476 s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
477};
478
479/*
480 * One for each channel, holds all channel setup data
481 * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
482 * with one another!
483 */
484struct il_channel_info {
485 struct il4965_channel_tgd_info tgd;
486 struct il4965_channel_tgh_info tgh;
487 struct il_eeprom_channel eeprom; /* EEPROM regulatory limit */
488 struct il_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for
489 * HT40 channel */
490
e7392364
SG
491 u8 channel; /* channel number */
492 u8 flags; /* flags copied from EEPROM */
493 s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
494 s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */
495 s8 min_power; /* always 0 */
496 s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */
e94a4099 497
e7392364
SG
498 u8 group_idx; /* 0-4, maps channel to group1/2/3/4/5 */
499 u8 band_idx; /* 0-4, maps channel to band1/2/3/4/5 */
e94a4099
SG
500 enum ieee80211_band band;
501
502 /* HT40 channel info */
503 s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
504 u8 ht40_flags; /* flags copied from EEPROM */
e7392364 505 u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
e94a4099
SG
506
507 /* Radio/DSP gain settings for each "normal" data Tx rate.
508 * These include, in addition to RF and DSP gain, a few fields for
509 * remembering/modifying gain settings (idxes). */
510 struct il3945_channel_power_info power_info[IL4965_MAX_RATE];
511
512 /* Radio/DSP gain settings for each scan rate, for directed scans. */
513 struct il3945_scan_power_info scan_pwr_info[IL_NUM_SCAN_RATES];
514};
515
516#define IL_TX_FIFO_BK 0 /* shared */
517#define IL_TX_FIFO_BE 1
518#define IL_TX_FIFO_VI 2 /* shared */
519#define IL_TX_FIFO_VO 3
520#define IL_TX_FIFO_UNUSED -1
521
522/* Minimum number of queues. MAX_NUM is defined in hw specific files.
523 * Set the minimum to accommodate the 4 standard TX queues, 1 command
524 * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
525#define IL_MIN_NUM_QUEUES 10
526
527#define IL_DEFAULT_CMD_QUEUE_NUM 4
528
529#define IEEE80211_DATA_LEN 2304
530#define IEEE80211_4ADDR_LEN 30
531#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
532#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
533
534struct il_frame {
535 union {
536 struct ieee80211_hdr frame;
537 struct il_tx_beacon_cmd beacon;
538 u8 raw[IEEE80211_FRAME_LEN];
539 u8 cmd[360];
540 } u;
541 struct list_head list;
542};
543
544#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
545#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
546#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
547
548enum {
549 CMD_SYNC = 0,
550 CMD_SIZE_NORMAL = 0,
551 CMD_NO_SKB = 0,
552 CMD_SIZE_HUGE = (1 << 0),
553 CMD_ASYNC = (1 << 1),
554 CMD_WANT_SKB = (1 << 2),
555 CMD_MAPPED = (1 << 3),
556};
557
558#define DEF_CMD_PAYLOAD_SIZE 320
559
560/**
561 * struct il_device_cmd
562 *
563 * For allocation of the command and tx queues, this establishes the overall
564 * size of the largest command we send to uCode, except for a scan command
565 * (which is relatively huge; space is allocated separately).
566 */
567struct il_device_cmd {
568 struct il_cmd_header hdr; /* uCode API */
569 union {
570 u32 flags;
571 u8 val8;
572 u16 val16;
573 u32 val32;
574 struct il_tx_cmd tx;
575 u8 payload[DEF_CMD_PAYLOAD_SIZE];
576 } __packed cmd;
577} __packed;
578
579#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct il_device_cmd))
580
e94a4099
SG
581struct il_host_cmd {
582 const void *data;
583 unsigned long reply_page;
1722f8e1
SG
584 void (*callback) (struct il_priv *il, struct il_device_cmd *cmd,
585 struct il_rx_pkt *pkt);
e94a4099
SG
586 u32 flags;
587 u16 len;
588 u8 id;
589};
590
591#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
592#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
593#define SUP_RATE_11G_MAX_NUM_CHANNELS 12
594
595/**
596 * struct il_rx_queue - Rx queue
597 * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
598 * @bd_dma: bus address of buffer of receive buffer descriptors (rbd)
599 * @read: Shared idx to newest available Rx buffer
600 * @write: Shared idx to oldest written Rx packet
601 * @free_count: Number of pre-allocated buffers in rx_free
602 * @rx_free: list of free SKBs for use
603 * @rx_used: List of Rx buffers with no SKB
604 * @need_update: flag to indicate we need to update read/write idx
605 * @rb_stts: driver's pointer to receive buffer status
606 * @rb_stts_dma: bus address of receive buffer status
607 *
608 * NOTE: rx_free and rx_used are used as a FIFO for il_rx_bufs
609 */
610struct il_rx_queue {
611 __le32 *bd;
612 dma_addr_t bd_dma;
613 struct il_rx_buf pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
614 struct il_rx_buf *queue[RX_QUEUE_SIZE];
615 u32 read;
616 u32 write;
617 u32 free_count;
618 u32 write_actual;
619 struct list_head rx_free;
620 struct list_head rx_used;
621 int need_update;
622 struct il_rb_status *rb_stts;
623 dma_addr_t rb_stts_dma;
624 spinlock_t lock;
625};
626
627#define IL_SUPPORTED_RATES_IE_LEN 8
628
629#define MAX_TID_COUNT 9
630
631#define IL_INVALID_RATE 0xFF
632#define IL_INVALID_VALUE -1
633
634/**
635 * struct il_ht_agg -- aggregation status while waiting for block-ack
636 * @txq_id: Tx queue used for Tx attempt
637 * @frame_count: # frames attempted by Tx command
638 * @wait_for_ba: Expect block-ack before next Tx reply
639 * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx win
640 * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx win
641 * @bitmap1: High order, one bit for each frame pending ACK in Tx win
642 * @rate_n_flags: Rate at which Tx was attempted
643 *
644 * If C_TX indicates that aggregation was attempted, driver must wait
645 * for block ack (N_COMPRESSED_BA). This struct stores tx reply info
646 * until block ack arrives.
647 */
648struct il_ht_agg {
649 u16 txq_id;
650 u16 frame_count;
651 u16 wait_for_ba;
652 u16 start_idx;
653 u64 bitmap;
654 u32 rate_n_flags;
655#define IL_AGG_OFF 0
656#define IL_AGG_ON 1
657#define IL_EMPTYING_HW_QUEUE_ADDBA 2
658#define IL_EMPTYING_HW_QUEUE_DELBA 3
659 u8 state;
660};
661
e94a4099 662struct il_tid_data {
e7392364 663 u16 seq_number; /* 4965 only */
e94a4099
SG
664 u16 tfds_in_queue;
665 struct il_ht_agg agg;
666};
667
668struct il_hw_key {
669 u32 cipher;
670 int keylen;
671 u8 keyidx;
672 u8 key[32];
673};
674
675union il_ht_rate_supp {
676 u16 rates;
677 struct {
678 u8 siso_rate;
679 u8 mimo_rate;
680 };
681};
682
683#define CFG_HT_RX_AMPDU_FACTOR_8K (0x0)
684#define CFG_HT_RX_AMPDU_FACTOR_16K (0x1)
685#define CFG_HT_RX_AMPDU_FACTOR_32K (0x2)
686#define CFG_HT_RX_AMPDU_FACTOR_64K (0x3)
687#define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K
688#define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K
689#define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K
690
691/*
692 * Maximal MPDU density for TX aggregation
693 * 4 - 2us density
694 * 5 - 4us density
695 * 6 - 8us density
696 * 7 - 16us density
697 */
698#define CFG_HT_MPDU_DENSITY_2USEC (0x4)
699#define CFG_HT_MPDU_DENSITY_4USEC (0x5)
700#define CFG_HT_MPDU_DENSITY_8USEC (0x6)
701#define CFG_HT_MPDU_DENSITY_16USEC (0x7)
702#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
703#define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC
704#define CFG_HT_MPDU_DENSITY_MIN (0x1)
705
706struct il_ht_config {
707 bool single_chain_sufficient;
e7392364 708 enum ieee80211_smps_mode smps; /* current smps mode */
e94a4099
SG
709};
710
711/* QoS structures */
712struct il_qos_info {
713 int qos_active;
714 struct il_qosparam_cmd def_qos_parm;
715};
716
717/*
718 * Structure should be accessed with sta_lock held. When station addition
719 * is in progress (IL_STA_UCODE_INPROGRESS) it is possible to access only
720 * the commands (il_addsta_cmd and il_link_quality_cmd) without
721 * sta_lock held.
722 */
723struct il_station_entry {
724 struct il_addsta_cmd sta;
725 struct il_tid_data tid[MAX_TID_COUNT];
6aa0c254 726 u8 used;
e94a4099
SG
727 struct il_hw_key keyinfo;
728 struct il_link_quality_cmd *lq;
729};
730
731struct il_station_priv_common {
e94a4099
SG
732 u8 sta_id;
733};
734
e94a4099
SG
735/**
736 * struct il_vif_priv - driver's ilate per-interface information
737 *
738 * When mac80211 allocates a virtual interface, it can allocate
739 * space for us to put data into.
740 */
741struct il_vif_priv {
e94a4099
SG
742 u8 ibss_bssid_sta_id;
743};
744
745/* one for each uCode image (inst/data, boot/init/runtime) */
746struct fw_desc {
747 void *v_addr; /* access by driver */
748 dma_addr_t p_addr; /* access by card's busmaster DMA */
749 u32 len; /* bytes */
750};
751
752/* uCode file layout */
753struct il_ucode_header {
e7392364 754 __le32 ver; /* major/minor/API/serial */
e94a4099
SG
755 struct {
756 __le32 inst_size; /* bytes of runtime code */
757 __le32 data_size; /* bytes of runtime data */
758 __le32 init_size; /* bytes of init code */
759 __le32 init_data_size; /* bytes of init data */
760 __le32 boot_size; /* bytes of bootstrap code */
e7392364 761 u8 data[0]; /* in same order as sizes */
e94a4099
SG
762 } v1;
763};
764
765struct il4965_ibss_seq {
766 u8 mac[ETH_ALEN];
767 u16 seq_num;
768 u16 frag_num;
769 unsigned long packet_time;
770 struct list_head list;
771};
772
773struct il_sensitivity_ranges {
774 u16 min_nrg_cck;
775 u16 max_nrg_cck;
776
777 u16 nrg_th_cck;
778 u16 nrg_th_ofdm;
779
780 u16 auto_corr_min_ofdm;
781 u16 auto_corr_min_ofdm_mrc;
782 u16 auto_corr_min_ofdm_x1;
783 u16 auto_corr_min_ofdm_mrc_x1;
784
785 u16 auto_corr_max_ofdm;
786 u16 auto_corr_max_ofdm_mrc;
787 u16 auto_corr_max_ofdm_x1;
788 u16 auto_corr_max_ofdm_mrc_x1;
789
790 u16 auto_corr_max_cck;
791 u16 auto_corr_max_cck_mrc;
792 u16 auto_corr_min_cck;
793 u16 auto_corr_min_cck_mrc;
794
795 u16 barker_corr_th_min;
796 u16 barker_corr_th_min_mrc;
797 u16 nrg_th_cca;
798};
799
e94a4099
SG
800#define KELVIN_TO_CELSIUS(x) ((x)-273)
801#define CELSIUS_TO_KELVIN(x) ((x)+273)
802
e94a4099
SG
803/**
804 * struct il_hw_params
b16db50a 805 * @bcast_id: f/w broadcast station ID
e94a4099
SG
806 * @max_txq_num: Max # Tx queues supported
807 * @dma_chnl_num: Number of Tx DMA/FIFO channels
808 * @scd_bc_tbls_size: size of scheduler byte count tables
809 * @tfd_size: TFD size
810 * @tx/rx_chains_num: Number of TX/RX chains
811 * @valid_tx/rx_ant: usable antennas
812 * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
813 * @max_rxq_log: Log-base-2 of max_rxq_size
814 * @rx_page_order: Rx buffer page order
815 * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
816 * @max_stations:
817 * @ht40_channel: is 40MHz width possible in band 2.4
818 * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
819 * @sw_crypto: 0 for hw, 1 for sw
820 * @max_xxx_size: for ucode uses
821 * @ct_kill_threshold: temperature threshold
822 * @beacon_time_tsf_bits: number of valid tsf bits for beacon time
823 * @struct il_sensitivity_ranges: range of sensitivity values
824 */
825struct il_hw_params {
b16db50a 826 u8 bcast_id;
e94a4099
SG
827 u8 max_txq_num;
828 u8 dma_chnl_num;
829 u16 scd_bc_tbls_size;
830 u32 tfd_size;
e7392364
SG
831 u8 tx_chains_num;
832 u8 rx_chains_num;
833 u8 valid_tx_ant;
834 u8 valid_rx_ant;
e94a4099
SG
835 u16 max_rxq_size;
836 u16 max_rxq_log;
837 u32 rx_page_order;
838 u32 rx_wrt_ptr_reg;
e7392364
SG
839 u8 max_stations;
840 u8 ht40_channel;
841 u8 max_beacon_itrvl; /* in 1024 ms */
e94a4099
SG
842 u32 max_inst_size;
843 u32 max_data_size;
844 u32 max_bsm_size;
e7392364 845 u32 ct_kill_threshold; /* value in hw-dependent units */
e94a4099
SG
846 u16 beacon_time_tsf_bits;
847 const struct il_sensitivity_ranges *sens;
848};
849
e94a4099
SG
850/******************************************************************************
851 *
852 * Functions implemented in core module which are forward declared here
853 * for use by iwl-[4-5].c
854 *
855 * NOTE: The implementation of these functions are not hardware specific
856 * which is why they are in the core module files.
857 *
858 * Naming convention --
859 * il_ <-- Is part of iwlwifi
860 * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
861 * il4965_bg_ <-- Called from work queue context
862 * il4965_mac_ <-- mac80211 callback
863 *
864 ****************************************************************************/
865extern void il4965_update_chain_flags(struct il_priv *il);
866extern const u8 il_bcast_addr[ETH_ALEN];
867extern int il_queue_space(const struct il_queue *q);
e7392364
SG
868static inline int
869il_queue_used(const struct il_queue *q, int i)
e94a4099 870{
e7392364
SG
871 return q->write_ptr >= q->read_ptr ? (i >= q->read_ptr &&
872 i < q->write_ptr) : !(i <
873 q->read_ptr
874 && i >=
875 q->
876 write_ptr);
e94a4099
SG
877}
878
e7392364
SG
879static inline u8
880il_get_cmd_idx(struct il_queue *q, u32 idx, int is_huge)
e94a4099
SG
881{
882 /*
883 * This is for init calibration result and scan command which
884 * required buffer > TFD_MAX_PAYLOAD_SIZE,
885 * the big buffer at end of command array
886 */
887 if (is_huge)
888 return q->n_win; /* must be power of 2 */
889
890 /* Otherwise, use normal size buffers */
891 return idx & (q->n_win - 1);
892}
893
e94a4099
SG
894struct il_dma_ptr {
895 dma_addr_t dma;
896 void *addr;
897 size_t size;
898};
899
900#define IL_OPERATION_MODE_AUTO 0
901#define IL_OPERATION_MODE_HT_ONLY 1
902#define IL_OPERATION_MODE_MIXED 2
903#define IL_OPERATION_MODE_20MHZ 3
904
905#define IL_TX_CRC_SIZE 4
906#define IL_TX_DELIMITER_SIZE 4
907
908#define TX_POWER_IL_ILLEGAL_VOLTAGE -10000
909
910/* Sensitivity and chain noise calibration */
911#define INITIALIZATION_VALUE 0xFFFF
912#define IL4965_CAL_NUM_BEACONS 20
913#define IL_CAL_NUM_BEACONS 16
914#define MAXIMUM_ALLOWED_PATHLOSS 15
915
916#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
917
918#define MAX_FA_OFDM 50
919#define MIN_FA_OFDM 5
920#define MAX_FA_CCK 50
921#define MIN_FA_CCK 5
922
923#define AUTO_CORR_STEP_OFDM 1
924
925#define AUTO_CORR_STEP_CCK 3
926#define AUTO_CORR_MAX_TH_CCK 160
927
928#define NRG_DIFF 2
929#define NRG_STEP_CCK 2
930#define NRG_MARGIN 8
931#define MAX_NUMBER_CCK_NO_FA 100
932
933#define AUTO_CORR_CCK_MIN_VAL_DEF (125)
934
935#define CHAIN_A 0
936#define CHAIN_B 1
937#define CHAIN_C 2
938#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
939#define ALL_BAND_FILTER 0xFF00
940#define IN_BAND_FILTER 0xFF
941#define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF
942
943#define NRG_NUM_PREV_STAT_L 20
944#define NUM_RX_CHAINS 3
945
946enum il4965_false_alarm_state {
947 IL_FA_TOO_MANY = 0,
948 IL_FA_TOO_FEW = 1,
949 IL_FA_GOOD_RANGE = 2,
950};
951
952enum il4965_chain_noise_state {
e7392364 953 IL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */
e94a4099
SG
954 IL_CHAIN_NOISE_ACCUMULATE,
955 IL_CHAIN_NOISE_CALIBRATED,
956 IL_CHAIN_NOISE_DONE,
957};
958
e94a4099
SG
959enum ucode_type {
960 UCODE_NONE = 0,
961 UCODE_INIT,
962 UCODE_RT
963};
964
965/* Sensitivity calib data */
966struct il_sensitivity_data {
967 u32 auto_corr_ofdm;
968 u32 auto_corr_ofdm_mrc;
969 u32 auto_corr_ofdm_x1;
970 u32 auto_corr_ofdm_mrc_x1;
971 u32 auto_corr_cck;
972 u32 auto_corr_cck_mrc;
973
974 u32 last_bad_plcp_cnt_ofdm;
975 u32 last_fa_cnt_ofdm;
976 u32 last_bad_plcp_cnt_cck;
977 u32 last_fa_cnt_cck;
978
979 u32 nrg_curr_state;
980 u32 nrg_prev_state;
981 u32 nrg_value[10];
e7392364 982 u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
e94a4099
SG
983 u32 nrg_silence_ref;
984 u32 nrg_energy_idx;
985 u32 nrg_silence_idx;
986 u32 nrg_th_cck;
987 s32 nrg_auto_corr_silence_diff;
988 u32 num_in_cck_no_fa;
989 u32 nrg_th_ofdm;
990
991 u16 barker_corr_th_min;
992 u16 barker_corr_th_min_mrc;
993 u16 nrg_th_cca;
994};
995
996/* Chain noise (differential Rx gain) calib data */
997struct il_chain_noise_data {
998 u32 active_chains;
999 u32 chain_noise_a;
1000 u32 chain_noise_b;
1001 u32 chain_noise_c;
1002 u32 chain_signal_a;
1003 u32 chain_signal_b;
1004 u32 chain_signal_c;
1005 u16 beacon_count;
1006 u8 disconn_array[NUM_RX_CHAINS];
1007 u8 delta_gain_code[NUM_RX_CHAINS];
1008 u8 radio_write;
1009 u8 state;
1010};
1011
e7392364 1012#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
e94a4099
SG
1013#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
1014
1015#define IL_TRAFFIC_ENTRIES (256)
1016#define IL_TRAFFIC_ENTRY_SIZE (64)
1017
1018enum {
1019 MEASUREMENT_READY = (1 << 0),
1020 MEASUREMENT_ACTIVE = (1 << 1),
1021};
1022
1023/* interrupt stats */
1024struct isr_stats {
1025 u32 hw;
1026 u32 sw;
1027 u32 err_code;
1028 u32 sch;
1029 u32 alive;
1030 u32 rfkill;
1031 u32 ctkill;
1032 u32 wakeup;
1033 u32 rx;
1034 u32 handlers[IL_CN_MAX];
1035 u32 tx;
1036 u32 unhandled;
1037};
1038
1039/* management stats */
1040enum il_mgmt_stats {
1041 MANAGEMENT_ASSOC_REQ = 0,
1042 MANAGEMENT_ASSOC_RESP,
1043 MANAGEMENT_REASSOC_REQ,
1044 MANAGEMENT_REASSOC_RESP,
1045 MANAGEMENT_PROBE_REQ,
1046 MANAGEMENT_PROBE_RESP,
1047 MANAGEMENT_BEACON,
1048 MANAGEMENT_ATIM,
1049 MANAGEMENT_DISASSOC,
1050 MANAGEMENT_AUTH,
1051 MANAGEMENT_DEAUTH,
1052 MANAGEMENT_ACTION,
1053 MANAGEMENT_MAX,
1054};
1055/* control stats */
1056enum il_ctrl_stats {
e7392364 1057 CONTROL_BACK_REQ = 0,
e94a4099
SG
1058 CONTROL_BACK,
1059 CONTROL_PSPOLL,
1060 CONTROL_RTS,
1061 CONTROL_CTS,
1062 CONTROL_ACK,
1063 CONTROL_CFEND,
1064 CONTROL_CFENDACK,
1065 CONTROL_MAX,
1066};
1067
1068struct traffic_stats {
1069#ifdef CONFIG_IWLEGACY_DEBUGFS
1070 u32 mgmt[MANAGEMENT_MAX];
1071 u32 ctrl[CONTROL_MAX];
1072 u32 data_cnt;
1073 u64 data_bytes;
1074#endif
1075};
1076
1077/*
1078 * host interrupt timeout value
1079 * used with setting interrupt coalescing timer
1080 * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit
1081 *
1082 * default interrupt coalescing timer is 64 x 32 = 2048 usecs
1083 * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs
1084 */
1085#define IL_HOST_INT_TIMEOUT_MAX (0xFF)
1086#define IL_HOST_INT_TIMEOUT_DEF (0x40)
1087#define IL_HOST_INT_TIMEOUT_MIN (0x0)
1088#define IL_HOST_INT_CALIB_TIMEOUT_MAX (0xFF)
1089#define IL_HOST_INT_CALIB_TIMEOUT_DEF (0x10)
1090#define IL_HOST_INT_CALIB_TIMEOUT_MIN (0x0)
1091
1092#define IL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5)
1093
1094/* TX queue watchdog timeouts in mSecs */
1095#define IL_DEF_WD_TIMEOUT (2000)
1096#define IL_LONG_WD_TIMEOUT (10000)
1097#define IL_MAX_WD_TIMEOUT (120000)
1098
1099struct il_force_reset {
1100 int reset_request_count;
1101 int reset_success_count;
1102 int reset_reject_count;
1103 unsigned long reset_duration;
1104 unsigned long last_force_reset_jiffies;
1105};
1106
1107/* extend beacon time format bit shifting */
1108/*
1109 * for _3945 devices
1110 * bits 31:24 - extended
1111 * bits 23:0 - interval
1112 */
1113#define IL3945_EXT_BEACON_TIME_POS 24
1114/*
1115 * for _4965 devices
1116 * bits 31:22 - extended
1117 * bits 21:0 - interval
1118 */
1119#define IL4965_EXT_BEACON_TIME_POS 22
1120
1121struct il_rxon_context {
1122 struct ieee80211_vif *vif;
e94a4099
SG
1123};
1124
99412002
SG
1125struct il_power_mgr {
1126 struct il_powertable_cmd sleep_cmd;
1127 struct il_powertable_cmd sleep_cmd_next;
1128 int debug_sleep_level_override;
1129 bool pci_pm;
1130};
1131
e94a4099 1132struct il_priv {
e94a4099
SG
1133 struct ieee80211_hw *hw;
1134 struct ieee80211_channel *ieee_channels;
1135 struct ieee80211_rate *ieee_rates;
93b7654e 1136
e94a4099 1137 struct il_cfg *cfg;
c39ae9fd 1138 const struct il_ops *ops;
93b7654e
SG
1139#ifdef CONFIG_IWLEGACY_DEBUGFS
1140 const struct il_debugfs_ops *debugfs_ops;
1141#endif
e94a4099
SG
1142
1143 /* temporary frame storage list */
1144 struct list_head free_frames;
1145 int frames_count;
1146
1147 enum ieee80211_band band;
1148 int alloc_rxb_page;
1149
1722f8e1
SG
1150 void (*handlers[IL_CN_MAX]) (struct il_priv *il,
1151 struct il_rx_buf *rxb);
e94a4099
SG
1152
1153 struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
1154
1155 /* spectrum measurement report caching */
1156 struct il_spectrum_notification measure_report;
1157 u8 measurement_status;
1158
1159 /* ucode beacon time */
1160 u32 ucode_beacon_time;
1161 int missed_beacon_threshold;
1162
1163 /* track IBSS manager (last beacon) status */
1164 u32 ibss_manager;
1165
1166 /* force reset */
1167 struct il_force_reset force_reset;
1168
1169 /* we allocate array of il_channel_info for NIC's valid channels.
1170 * Access via channel # using indirect idx array */
1171 struct il_channel_info *channel_info; /* channel info array */
1172 u8 channel_count; /* # of channels */
1173
1174 /* thermal calibration */
1175 s32 temperature; /* degrees Kelvin */
1176 s32 last_temperature;
1177
e94a4099
SG
1178 /* Scan related variables */
1179 unsigned long scan_start;
1180 unsigned long scan_start_tsf;
1181 void *scan_cmd;
1182 enum ieee80211_band scan_band;
1183 struct cfg80211_scan_request *scan_request;
1184 struct ieee80211_vif *scan_vif;
1185 u8 scan_tx_ant[IEEE80211_NUM_BANDS];
1186 u8 mgmt_tx_ant;
1187
1188 /* spinlock */
1189 spinlock_t lock; /* protect general shared data */
1190 spinlock_t hcmd_lock; /* protect hcmd */
1191 spinlock_t reg_lock; /* protect hw register access */
1192 struct mutex mutex;
1193
1194 /* basic pci-network driver stuff */
1195 struct pci_dev *pci_dev;
1196
1197 /* pci hardware address support */
1198 void __iomem *hw_base;
e7392364
SG
1199 u32 hw_rev;
1200 u32 hw_wa_rev;
1201 u8 rev_id;
e94a4099
SG
1202
1203 /* command queue number */
1204 u8 cmd_queue;
1205
1206 /* max number of station keys */
1207 u8 sta_key_max_num;
1208
1209 /* EEPROM MAC addresses */
1210 struct mac_address addresses[1];
1211
1212 /* uCode images, save to reload in case of failure */
e7392364
SG
1213 int fw_idx; /* firmware we're trying to load */
1214 u32 ucode_ver; /* version of ucode, copy of
1215 il_ucode.ver */
e94a4099
SG
1216 struct fw_desc ucode_code; /* runtime inst */
1217 struct fw_desc ucode_data; /* runtime data original */
1218 struct fw_desc ucode_data_backup; /* runtime data save/restore */
1219 struct fw_desc ucode_init; /* initialization inst */
1220 struct fw_desc ucode_init_data; /* initialization data */
1221 struct fw_desc ucode_boot; /* bootstrap inst */
1222 enum ucode_type ucode_type;
1223 u8 ucode_write_complete; /* the image write is complete */
1224 char firmware_name[25];
1225
83007196 1226 struct ieee80211_vif *vif;
e94a4099 1227
8d44f2bd
SG
1228 struct il_qos_info qos_data;
1229
1c03c462
SG
1230 struct {
1231 bool enabled;
1232 bool is_40mhz;
1233 bool non_gf_sta_present;
1234 u8 protection;
1235 u8 extension_chan_offset;
1236 } ht;
1237
c8b03958
SG
1238 /*
1239 * We declare this const so it can only be
1240 * changed via explicit cast within the
1241 * routines that actually update the physical
1242 * hardware.
1243 */
1244 const struct il_rxon_cmd active;
1245 struct il_rxon_cmd staging;
1246
1247 struct il_rxon_time_cmd timing;
1248
e94a4099
SG
1249 __le16 switch_channel;
1250
1251 /* 1st responses from initialize and runtime uCode images.
1252 * _4965's initialize alive response contains some calibration data. */
1253 struct il_init_alive_resp card_alive_init;
1254 struct il_alive_resp card_alive;
1255
1256 u16 active_rate;
1257
1258 u8 start_calib;
1259 struct il_sensitivity_data sensitivity_data;
1260 struct il_chain_noise_data chain_noise_data;
1261 __le16 sensitivity_tbl[HD_TBL_SIZE];
1262
1263 struct il_ht_config current_ht_config;
1264
1265 /* Rate scaling data */
1266 u8 retry_rate;
1267
1268 wait_queue_head_t wait_command_queue;
1269
1270 int activity_timer_active;
1271
1272 /* Rx and Tx DMA processing queues */
1273 struct il_rx_queue rxq;
1274 struct il_tx_queue *txq;
1275 unsigned long txq_ctx_active_msk;
e7392364
SG
1276 struct il_dma_ptr kw; /* keep warm address */
1277 struct il_dma_ptr scd_bc_tbls;
e94a4099
SG
1278
1279 u32 scd_base_addr; /* scheduler sram base address */
1280
1281 unsigned long status;
1282
1283 /* counts mgmt, ctl, and data packets */
1284 struct traffic_stats tx_stats;
1285 struct traffic_stats rx_stats;
1286
1287 /* counts interrupts */
1288 struct isr_stats isr_stats;
1289
1290 struct il_power_mgr power_data;
1291
1292 /* context information */
e7392364 1293 u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */
e94a4099
SG
1294
1295 /* station table variables */
1296
1297 /* Note: if lock and sta_lock are needed, lock must be acquired first */
1298 spinlock_t sta_lock;
1299 int num_stations;
1300 struct il_station_entry stations[IL_STATION_COUNT];
1301 unsigned long ucode_key_table;
1302
1303 /* queue refcounts */
1304#define IL_MAX_HW_QUEUES 32
1305 unsigned long queue_stopped[BITS_TO_LONGS(IL_MAX_HW_QUEUES)];
1306 /* for each AC */
1307 atomic_t queue_stop_count[4];
1308
1309 /* Indication if ieee80211_ops->open has been called */
1310 u8 is_open;
1311
1312 u8 mac80211_registered;
1313
1314 /* eeprom -- this is in the card's little endian byte order */
1315 u8 *eeprom;
1316 struct il_eeprom_calib_info *calib_info;
1317
1318 enum nl80211_iftype iw_mode;
1319
1320 /* Last Rx'd beacon timestamp */
1321 u64 timestamp;
1322
1323 union {
1324#if defined(CONFIG_IWL3945) || defined(CONFIG_IWL3945_MODULE)
1325 struct {
1326 void *shared_virt;
1327 dma_addr_t shared_phys;
1328
1329 struct delayed_work thermal_periodic;
1330 struct delayed_work rfkill_poll;
1331
1332 struct il3945_notif_stats stats;
1333#ifdef CONFIG_IWLEGACY_DEBUGFS
1334 struct il3945_notif_stats accum_stats;
1335 struct il3945_notif_stats delta_stats;
1336 struct il3945_notif_stats max_delta;
1337#endif
1338
1339 u32 sta_supp_rates;
1340 int last_rx_rssi; /* From Rx packet stats */
1341
1342 /* Rx'd packet timing information */
1343 u32 last_beacon_time;
1344 u64 last_tsf;
1345
1346 /*
1347 * each calibration channel group in the
1348 * EEPROM has a derived clip setting for
1349 * each rate.
1350 */
1351 const struct il3945_clip_group clip_groups[5];
1352
1353 } _3945;
1354#endif
1355#if defined(CONFIG_IWL4965) || defined(CONFIG_IWL4965_MODULE)
1356 struct {
1357 struct il_rx_phy_res last_phy_res;
1358 bool last_phy_res_valid;
0255beda 1359 u32 ampdu_ref;
e94a4099
SG
1360
1361 struct completion firmware_loading_complete;
1362
1363 /*
1364 * chain noise reset and gain commands are the
1365 * two extra calibration commands follows the standard
1366 * phy calibration commands
1367 */
1368 u8 phy_calib_chain_noise_reset_cmd;
1369 u8 phy_calib_chain_noise_gain_cmd;
1370
d735f921
SG
1371 u8 key_mapping_keys;
1372 struct il_wep_key wep_keys[WEP_KEYS_MAX];
1373
e94a4099
SG
1374 struct il_notif_stats stats;
1375#ifdef CONFIG_IWLEGACY_DEBUGFS
1376 struct il_notif_stats accum_stats;
1377 struct il_notif_stats delta_stats;
1378 struct il_notif_stats max_delta;
1379#endif
1380
1381 } _4965;
1382#endif
1383 };
1384
1385 struct il_hw_params hw_params;
1386
1387 u32 inta_mask;
1388
1389 struct workqueue_struct *workqueue;
1390
1391 struct work_struct restart;
1392 struct work_struct scan_completed;
1393 struct work_struct rx_replenish;
1394 struct work_struct abort_scan;
1395
83007196 1396 bool beacon_enabled;
e94a4099
SG
1397 struct sk_buff *beacon_skb;
1398
1399 struct work_struct tx_flush;
1400
1401 struct tasklet_struct irq_tasklet;
1402
1403 struct delayed_work init_alive_start;
1404 struct delayed_work alive_start;
1405 struct delayed_work scan_check;
1406
1407 /* TX Power */
1408 s8 tx_power_user_lmt;
1409 s8 tx_power_device_lmt;
1410 s8 tx_power_next;
1411
e94a4099
SG
1412#ifdef CONFIG_IWLEGACY_DEBUG
1413 /* debugging info */
e7392364
SG
1414 u32 debug_level; /* per device debugging will override global
1415 il_debug_level if set */
1416#endif /* CONFIG_IWLEGACY_DEBUG */
e94a4099
SG
1417#ifdef CONFIG_IWLEGACY_DEBUGFS
1418 /* debugfs */
1419 u16 tx_traffic_idx;
1420 u16 rx_traffic_idx;
1421 u8 *tx_traffic;
1422 u8 *rx_traffic;
1423 struct dentry *debugfs_dir;
1424 u32 dbgfs_sram_offset, dbgfs_sram_len;
1425 bool disable_ht40;
e7392364 1426#endif /* CONFIG_IWLEGACY_DEBUGFS */
e94a4099
SG
1427
1428 struct work_struct txpower_work;
1429 u32 disable_sens_cal;
1430 u32 disable_chain_noise_cal;
1431 u32 disable_tx_power_cal;
1432 struct work_struct run_time_calib_work;
1433 struct timer_list stats_periodic;
1434 struct timer_list watchdog;
1435 bool hw_ready;
1436
1437 struct led_classdev led;
1438 unsigned long blink_on, blink_off;
1439 bool led_registered;
e7392364 1440}; /*il_priv */
e94a4099 1441
e7392364
SG
1442static inline void
1443il_txq_ctx_activate(struct il_priv *il, int txq_id)
e94a4099
SG
1444{
1445 set_bit(txq_id, &il->txq_ctx_active_msk);
1446}
1447
e7392364
SG
1448static inline void
1449il_txq_ctx_deactivate(struct il_priv *il, int txq_id)
e94a4099
SG
1450{
1451 clear_bit(txq_id, &il->txq_ctx_active_msk);
1452}
1453
e7392364
SG
1454static inline int
1455il_is_associated(struct il_priv *il)
e94a4099 1456{
c8b03958 1457 return (il->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
e94a4099
SG
1458}
1459
e7392364
SG
1460static inline int
1461il_is_any_associated(struct il_priv *il)
e94a4099
SG
1462{
1463 return il_is_associated(il);
1464}
1465
e7392364
SG
1466static inline int
1467il_is_channel_valid(const struct il_channel_info *ch_info)
e94a4099
SG
1468{
1469 if (ch_info == NULL)
1470 return 0;
1471 return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
1472}
1473
e7392364
SG
1474static inline int
1475il_is_channel_radar(const struct il_channel_info *ch_info)
e94a4099
SG
1476{
1477 return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
1478}
1479
e7392364
SG
1480static inline u8
1481il_is_channel_a_band(const struct il_channel_info *ch_info)
e94a4099
SG
1482{
1483 return ch_info->band == IEEE80211_BAND_5GHZ;
1484}
1485
1486static inline int
1487il_is_channel_passive(const struct il_channel_info *ch)
1488{
1489 return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
1490}
1491
1492static inline int
1493il_is_channel_ibss(const struct il_channel_info *ch)
1494{
1495 return (ch->flags & EEPROM_CHANNEL_IBSS) ? 1 : 0;
1496}
be663ab6 1497
e94a4099
SG
1498static inline void
1499__il_free_pages(struct il_priv *il, struct page *page)
1500{
1501 __free_pages(page, il->hw_params.rx_page_order);
1502 il->alloc_rxb_page--;
1503}
1504
e7392364
SG
1505static inline void
1506il_free_pages(struct il_priv *il, unsigned long page)
e94a4099
SG
1507{
1508 free_pages(page, il->hw_params.rx_page_order);
1509 il->alloc_rxb_page--;
1510}
be663ab6
WYG
1511
1512#define IWLWIFI_VERSION "in-tree:"
1513#define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation"
1514#define DRV_AUTHOR "<ilw@linux.intel.com>"
1515
e2ebc833 1516#define IL_PCI_DEVICE(dev, subdev, cfg) \
be663ab6
WYG
1517 .vendor = PCI_VENDOR_ID_INTEL, .device = (dev), \
1518 .subvendor = PCI_ANY_ID, .subdevice = (subdev), \
1519 .driver_data = (kernel_ulong_t)&(cfg)
1520
1521#define TIME_UNIT 1024
1522
e2ebc833
SG
1523#define IL_SKU_G 0x1
1524#define IL_SKU_A 0x2
1525#define IL_SKU_N 0x8
be663ab6 1526
e2ebc833 1527#define IL_CMD(x) case x: return #x
be663ab6 1528
e94a4099 1529/* Size of one Rx buffer in host DRAM */
e7392364 1530#define IL_RX_BUF_SIZE_3K (3 * 1000) /* 3945 only */
e94a4099
SG
1531#define IL_RX_BUF_SIZE_4K (4 * 1024)
1532#define IL_RX_BUF_SIZE_8K (8 * 1024)
1533
9b5e2f46 1534#ifdef CONFIG_IWLEGACY_DEBUGFS
e2ebc833 1535struct il_debugfs_ops {
1722f8e1
SG
1536 ssize_t(*rx_stats_read) (struct file *file, char __user *user_buf,
1537 size_t count, loff_t *ppos);
1538 ssize_t(*tx_stats_read) (struct file *file, char __user *user_buf,
1539 size_t count, loff_t *ppos);
1540 ssize_t(*general_stats_read) (struct file *file,
1541 char __user *user_buf, size_t count,
1542 loff_t *ppos);
be663ab6 1543};
9b5e2f46 1544#endif
be663ab6 1545
1600b875 1546struct il_ops {
be663ab6 1547 /* Handling TX */
1722f8e1
SG
1548 void (*txq_update_byte_cnt_tbl) (struct il_priv *il,
1549 struct il_tx_queue *txq,
e7392364 1550 u16 byte_cnt);
1722f8e1
SG
1551 int (*txq_attach_buf_to_tfd) (struct il_priv *il,
1552 struct il_tx_queue *txq, dma_addr_t addr,
e7392364 1553 u16 len, u8 reset, u8 pad);
1722f8e1
SG
1554 void (*txq_free_tfd) (struct il_priv *il, struct il_tx_queue *txq);
1555 int (*txq_init) (struct il_priv *il, struct il_tx_queue *txq);
be663ab6 1556 /* alive notification after init uCode load */
1722f8e1 1557 void (*init_alive_start) (struct il_priv *il);
be663ab6 1558 /* check validity of rtc data address */
e7392364 1559 int (*is_valid_rtc_data_addr) (u32 addr);
be663ab6 1560 /* 1st ucode load */
1722f8e1 1561 int (*load_ucode) (struct il_priv *il);
1ba2f121 1562
1722f8e1
SG
1563 void (*dump_nic_error_log) (struct il_priv *il);
1564 int (*dump_fh) (struct il_priv *il, char **buf, bool display);
1565 int (*set_channel_switch) (struct il_priv *il,
1566 struct ieee80211_channel_switch *ch_switch);
be663ab6 1567 /* power management */
f03ee2a8 1568 int (*apm_init) (struct il_priv *il);
be663ab6 1569
f03ee2a8 1570 /* tx power */
1722f8e1
SG
1571 int (*send_tx_power) (struct il_priv *il);
1572 void (*update_chain_flags) (struct il_priv *il);
be663ab6 1573
47ef694d 1574 /* eeprom operations */
a89268e8
SG
1575 int (*eeprom_acquire_semaphore) (struct il_priv *il);
1576 void (*eeprom_release_semaphore) (struct il_priv *il);
be663ab6 1577
c9363551
SG
1578 int (*rxon_assoc) (struct il_priv *il);
1579 int (*commit_rxon) (struct il_priv *il);
1580 void (*set_rxon_chain) (struct il_priv *il);
1581
1582 u16(*get_hcmd_size) (u8 cmd_id, u16 len);
1583 u16(*build_addsta_hcmd) (const struct il_addsta_cmd *cmd, u8 *data);
1584
1585 int (*request_scan) (struct il_priv *il, struct ieee80211_vif *vif);
1586 void (*post_scan) (struct il_priv *il);
1587 void (*post_associate) (struct il_priv *il);
1588 void (*config_ap) (struct il_priv *il);
1589 /* station management */
1590 int (*update_bcast_stations) (struct il_priv *il);
1591 int (*manage_ibss_station) (struct il_priv *il,
1592 struct ieee80211_vif *vif, bool add);
1593
1594 int (*send_led_cmd) (struct il_priv *il, struct il_led_cmd *led_cmd);
be663ab6
WYG
1595};
1596
e2ebc833 1597struct il_mod_params {
be663ab6
WYG
1598 int sw_crypto; /* def: 0 = using hardware encryption */
1599 int disable_hw_scan; /* def: 0 = use h/w scan */
1600 int num_of_queues; /* def: HW dependent */
1601 int disable_11n; /* def: 0 = 11n capabilities enabled */
1602 int amsdu_size_8K; /* def: 1 = enable 8K amsdu size */
e7392364 1603 int antenna; /* def: 0 = both antennas (use diversity) */
be663ab6
WYG
1604 int restart_fw; /* def: 1 = restart firmware */
1605};
1606
47ef694d
SG
1607#define IL_LED_SOLID 11
1608#define IL_DEF_LED_INTRVL cpu_to_le32(1000)
1609
1610#define IL_LED_ACTIVITY (0<<1)
1611#define IL_LED_LINK (1<<1)
1612
1613/*
1614 * LED mode
1615 * IL_LED_DEFAULT: use device default
1616 * IL_LED_RF_STATE: turn LED on/off based on RF state
1617 * LED ON = RF ON
1618 * LED OFF = RF OFF
1619 * IL_LED_BLINK: adjust led blink rate based on blink table
1620 */
1621enum il_led_mode {
1622 IL_LED_DEFAULT,
1623 IL_LED_RF_STATE,
1624 IL_LED_BLINK,
1625};
1626
1627void il_leds_init(struct il_priv *il);
1628void il_leds_exit(struct il_priv *il);
1629
be663ab6 1630/**
e2ebc833 1631 * struct il_cfg
be663ab6
WYG
1632 * @fw_name_pre: Firmware filename prefix. The api version and extension
1633 * (.ucode) will be added to filename before loading from disk. The
1634 * filename is constructed as fw_name_pre<api>.ucode.
1635 * @ucode_api_max: Highest version of uCode API supported by driver.
1636 * @ucode_api_min: Lowest version of uCode API supported by driver.
1637 * @scan_antennas: available antenna for scan operation
1638 * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
1639 *
1640 * We enable the driver to be backward compatible wrt API version. The
1641 * driver specifies which APIs it supports (with @ucode_api_max being the
1642 * highest and @ucode_api_min the lowest). Firmware will only be loaded if
1643 * it has a supported API version. The firmware's API version will be
e2ebc833 1644 * stored in @il_priv, enabling the driver to make runtime changes based
be663ab6
WYG
1645 * on firmware version used.
1646 *
1647 * For example,
46bc8d4b 1648 * if (IL_UCODE_API(il->ucode_ver) >= 2) {
be663ab6
WYG
1649 * Driver interacts with Firmware API version >= 2.
1650 * } else {
1651 * Driver interacts with Firmware API version 1.
1652 * }
1653 *
1654 * The ideal usage of this infrastructure is to treat a new ucode API
1655 * release as a new hardware revision. That is, through utilizing the
e2ebc833 1656 * il_hcmd_utils_ops etc. we accommodate different command structures
be663ab6
WYG
1657 * and flows between hardware versions as well as their API
1658 * versions.
1659 *
1660 */
e2ebc833 1661struct il_cfg {
be663ab6
WYG
1662 /* params specific to an individual device within a device family */
1663 const char *name;
1664 const char *fw_name_pre;
1665 const unsigned int ucode_api_max;
1666 const unsigned int ucode_api_min;
e7392364
SG
1667 u8 valid_tx_ant;
1668 u8 valid_rx_ant;
be663ab6 1669 unsigned int sku;
e7392364
SG
1670 u16 eeprom_ver;
1671 u16 eeprom_calib_ver;
be663ab6 1672 /* module based parameters which can be set from modprobe cmd */
e2ebc833 1673 const struct il_mod_params *mod_params;
be663ab6 1674 /* params not likely to change within a device family */
e2ebc833 1675 struct il_base_params *base_params;
be663ab6
WYG
1676 /* params likely to change within a device family */
1677 u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
e2ebc833 1678 enum il_led_mode led_mode;
89ef1ed2
SG
1679
1680 int eeprom_size;
1681 int num_of_queues; /* def: HW dependent */
1682 int num_of_ampdu_queues; /* def: HW dependent */
1683 /* for il_apm_init() */
1684 u32 pll_cfg_val;
1685 bool set_l0s;
1686 bool use_bsm;
1687
1688 u16 led_compensation;
1689 int chain_noise_num_beacons;
1690 unsigned int wd_timeout;
1691 bool temperature_kelvin;
1692 const bool ucode_tracing;
1693 const bool sensitivity_calib_by_driver;
1694 const bool chain_noise_calib_by_driver;
93a984a4
SG
1695
1696 const u32 regulatory_bands[7];
be663ab6
WYG
1697};
1698
1699/***************************
1700 * L i b *
1701 ***************************/
1702
e7392364
SG
1703int il_mac_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1704 u16 queue, const struct ieee80211_tx_queue_params *params);
e2ebc833 1705int il_mac_tx_last_beacon(struct ieee80211_hw *hw);
e7392364 1706
83007196
SG
1707void il_set_rxon_hwcrypto(struct il_priv *il, int hw_decrypt);
1708int il_check_rxon_cmd(struct il_priv *il);
1709int il_full_rxon_required(struct il_priv *il);
1710int il_set_rxon_channel(struct il_priv *il, struct ieee80211_channel *ch);
1711void il_set_flags_for_band(struct il_priv *il, enum ieee80211_band band,
1712 struct ieee80211_vif *vif);
e7392364
SG
1713u8 il_get_single_channel_number(struct il_priv *il, enum ieee80211_band band);
1714void il_set_rxon_ht(struct il_priv *il, struct il_ht_config *ht_conf);
83007196 1715bool il_is_ht40_tx_allowed(struct il_priv *il,
e7392364 1716 struct ieee80211_sta_ht_cap *ht_cap);
83007196 1717void il_connection_init_rx_config(struct il_priv *il);
46bc8d4b 1718void il_set_rate(struct il_priv *il);
e7392364
SG
1719int il_set_decrypted_flag(struct il_priv *il, struct ieee80211_hdr *hdr,
1720 u32 decrypt_res, struct ieee80211_rx_status *stats);
46bc8d4b 1721void il_irq_handle_error(struct il_priv *il);
e7392364 1722int il_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
e2ebc833 1723void il_mac_remove_interface(struct ieee80211_hw *hw,
e7392364
SG
1724 struct ieee80211_vif *vif);
1725int il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1726 enum nl80211_iftype newtype, bool newp2p);
70277f47 1727void il_mac_flush(struct ieee80211_hw *hw, bool drop);
46bc8d4b 1728int il_alloc_txq_mem(struct il_priv *il);
6668e4eb 1729void il_free_txq_mem(struct il_priv *il);
be663ab6 1730
d3175167 1731#ifdef CONFIG_IWLEGACY_DEBUGFS
288f9954 1732extern void il_update_stats(struct il_priv *il, bool is_tx, __le16 fc, u16 len);
be663ab6 1733#else
e7392364
SG
1734static inline void
1735il_update_stats(struct il_priv *il, bool is_tx, __le16 fc, u16 len)
be663ab6
WYG
1736{
1737}
1738#endif
288f9954 1739
be663ab6 1740/*****************************************************
288f9954
SG
1741 * Handlers
1742 ***************************************************/
e7392364
SG
1743void il_hdl_pm_sleep(struct il_priv *il, struct il_rx_buf *rxb);
1744void il_hdl_pm_debug_stats(struct il_priv *il, struct il_rx_buf *rxb);
1745void il_hdl_error(struct il_priv *il, struct il_rx_buf *rxb);
288f9954 1746void il_hdl_csa(struct il_priv *il, struct il_rx_buf *rxb);
be663ab6
WYG
1747
1748/*****************************************************
1749* RX
1750******************************************************/
46bc8d4b
SG
1751void il_cmd_queue_unmap(struct il_priv *il);
1752void il_cmd_queue_free(struct il_priv *il);
1753int il_rx_queue_alloc(struct il_priv *il);
e7392364 1754void il_rx_queue_update_write_ptr(struct il_priv *il, struct il_rx_queue *q);
e2ebc833 1755int il_rx_queue_space(const struct il_rx_queue *q);
e7392364 1756void il_tx_cmd_complete(struct il_priv *il, struct il_rx_buf *rxb);
288f9954 1757
e7392364
SG
1758void il_hdl_spectrum_measurement(struct il_priv *il, struct il_rx_buf *rxb);
1759void il_recover_from_stats(struct il_priv *il, struct il_rx_pkt *pkt);
46bc8d4b 1760void il_chswitch_done(struct il_priv *il, bool is_success);
be663ab6
WYG
1761
1762/*****************************************************
1763* TX
1764******************************************************/
d87c771f
SG
1765extern void il_txq_update_write_ptr(struct il_priv *il, struct il_tx_queue *txq);
1766extern int il_tx_queue_init(struct il_priv *il, u32 txq_id);
1767extern void il_tx_queue_reset(struct il_priv *il, u32 txq_id);
1768extern void il_tx_queue_unmap(struct il_priv *il, int txq_id);
1769extern void il_tx_queue_free(struct il_priv *il, int txq_id);
1770extern void il_setup_watchdog(struct il_priv *il);
be663ab6
WYG
1771/*****************************************************
1772 * TX power
1773 ****************************************************/
46bc8d4b 1774int il_set_tx_power(struct il_priv *il, s8 tx_power, bool force);
be663ab6
WYG
1775
1776/*******************************************************************************
1777 * Rate
1778 ******************************************************************************/
1779
83007196 1780u8 il_get_lowest_plcp(struct il_priv *il);
be663ab6
WYG
1781
1782/*******************************************************************************
1783 * Scanning
1784 ******************************************************************************/
46bc8d4b
SG
1785void il_init_scan_params(struct il_priv *il);
1786int il_scan_cancel(struct il_priv *il);
1787int il_scan_cancel_timeout(struct il_priv *il, unsigned long ms);
1788void il_force_scan_end(struct il_priv *il);
e7392364
SG
1789int il_mac_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1790 struct cfg80211_scan_request *req);
46bc8d4b
SG
1791void il_internal_short_hw_scan(struct il_priv *il);
1792int il_force_reset(struct il_priv *il, bool external);
e7392364 1793u16 il_fill_probe_req(struct il_priv *il, struct ieee80211_mgmt *frame,
1722f8e1 1794 const u8 *ta, const u8 *ie, int ie_len, int left);
46bc8d4b 1795void il_setup_rx_scan_handlers(struct il_priv *il);
e7392364
SG
1796u16 il_get_active_dwell_time(struct il_priv *il, enum ieee80211_band band,
1797 u8 n_probes);
1798u16 il_get_passive_dwell_time(struct il_priv *il, enum ieee80211_band band,
1799 struct ieee80211_vif *vif);
46bc8d4b
SG
1800void il_setup_scan_deferred_work(struct il_priv *il);
1801void il_cancel_scan_deferred_work(struct il_priv *il);
be663ab6
WYG
1802
1803/* For faster active scanning, scan will move to the next channel if fewer than
1804 * PLCP_QUIET_THRESH packets are heard on this channel within
1805 * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
1806 * time if it's a quiet channel (nothing responded to our probe, and there's
1807 * no other traffic).
1808 * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
e7392364
SG
1809#define IL_ACTIVE_QUIET_TIME cpu_to_le16(10) /* msec */
1810#define IL_PLCP_QUIET_THRESH cpu_to_le16(1) /* packets */
be663ab6 1811
e2ebc833 1812#define IL_SCAN_CHECK_WATCHDOG (HZ * 7)
be663ab6
WYG
1813
1814/*****************************************************
1815 * S e n d i n g H o s t C o m m a n d s *
1816 *****************************************************/
1817
e2ebc833 1818const char *il_get_cmd_string(u8 cmd);
e7392364 1819int __must_check il_send_cmd_sync(struct il_priv *il, struct il_host_cmd *cmd);
46bc8d4b 1820int il_send_cmd(struct il_priv *il, struct il_host_cmd *cmd);
e7392364
SG
1821int __must_check il_send_cmd_pdu(struct il_priv *il, u8 id, u16 len,
1822 const void *data);
1823int il_send_cmd_pdu_async(struct il_priv *il, u8 id, u16 len, const void *data,
1722f8e1
SG
1824 void (*callback) (struct il_priv *il,
1825 struct il_device_cmd *cmd,
1826 struct il_rx_pkt *pkt));
be663ab6 1827
46bc8d4b 1828int il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd);
be663ab6 1829
be663ab6
WYG
1830/*****************************************************
1831 * PCI *
1832 *****************************************************/
1833
e2ebc833 1834void il_bg_watchdog(unsigned long data);
e7392364
SG
1835u32 il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval);
1836__le32 il_add_beacon_time(struct il_priv *il, u32 base, u32 addon,
1837 u32 beacon_interval);
be663ab6
WYG
1838
1839#ifdef CONFIG_PM
e2ebc833 1840extern const struct dev_pm_ops il_pm_ops;
be663ab6 1841
e2ebc833 1842#define IL_LEGACY_PM_OPS (&il_pm_ops)
be663ab6
WYG
1843
1844#else /* !CONFIG_PM */
1845
e2ebc833 1846#define IL_LEGACY_PM_OPS NULL
be663ab6
WYG
1847
1848#endif /* !CONFIG_PM */
1849
1850/*****************************************************
1851* Error Handling Debugging
1852******************************************************/
46bc8d4b 1853void il4965_dump_nic_error_log(struct il_priv *il);
d3175167 1854#ifdef CONFIG_IWLEGACY_DEBUG
83007196 1855void il_print_rx_config_cmd(struct il_priv *il);
be663ab6 1856#else
e7392364 1857static inline void
83007196 1858il_print_rx_config_cmd(struct il_priv *il)
be663ab6
WYG
1859{
1860}
1861#endif
1862
46bc8d4b 1863void il_clear_isr_stats(struct il_priv *il);
be663ab6
WYG
1864
1865/*****************************************************
1866* GEOS
1867******************************************************/
46bc8d4b
SG
1868int il_init_geos(struct il_priv *il);
1869void il_free_geos(struct il_priv *il);
be663ab6
WYG
1870
1871/*************** DRIVER STATUS FUNCTIONS *****/
1872
a6766ccd
SG
1873#define S_HCMD_ACTIVE 0 /* host command in progress */
1874/* 1 is unused (used to be S_HCMD_SYNC_ACTIVE) */
1875#define S_INT_ENABLED 2
bc269a8e 1876#define S_RFKILL 3
a6766ccd
SG
1877#define S_CT_KILL 4
1878#define S_INIT 5
1879#define S_ALIVE 6
1880#define S_READY 7
1881#define S_TEMPERATURE 8
1882#define S_GEO_CONFIGURED 9
1883#define S_EXIT_PENDING 10
db7746f7 1884#define S_STATS 12
a6766ccd
SG
1885#define S_SCANNING 13
1886#define S_SCAN_ABORTING 14
1887#define S_SCAN_HW 15
1888#define S_POWER_PMI 16
1889#define S_FW_ERROR 17
1890#define S_CHANNEL_SWITCH_PENDING 18
be663ab6 1891
e7392364
SG
1892static inline int
1893il_is_ready(struct il_priv *il)
be663ab6
WYG
1894{
1895 /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
1896 * set but EXIT_PENDING is not */
a6766ccd 1897 return test_bit(S_READY, &il->status) &&
e7392364
SG
1898 test_bit(S_GEO_CONFIGURED, &il->status) &&
1899 !test_bit(S_EXIT_PENDING, &il->status);
be663ab6
WYG
1900}
1901
e7392364
SG
1902static inline int
1903il_is_alive(struct il_priv *il)
be663ab6 1904{
a6766ccd 1905 return test_bit(S_ALIVE, &il->status);
be663ab6
WYG
1906}
1907
e7392364
SG
1908static inline int
1909il_is_init(struct il_priv *il)
be663ab6 1910{
a6766ccd 1911 return test_bit(S_INIT, &il->status);
be663ab6
WYG
1912}
1913
e7392364
SG
1914static inline int
1915il_is_rfkill(struct il_priv *il)
be663ab6 1916{
4e3bc141 1917 return test_bit(S_RFKILL, &il->status);
be663ab6
WYG
1918}
1919
e7392364
SG
1920static inline int
1921il_is_ctkill(struct il_priv *il)
be663ab6 1922{
a6766ccd 1923 return test_bit(S_CT_KILL, &il->status);
be663ab6
WYG
1924}
1925
e7392364
SG
1926static inline int
1927il_is_ready_rf(struct il_priv *il)
be663ab6
WYG
1928{
1929
46bc8d4b 1930 if (il_is_rfkill(il))
be663ab6
WYG
1931 return 0;
1932
46bc8d4b 1933 return il_is_ready(il);
be663ab6
WYG
1934}
1935
46bc8d4b 1936extern void il_send_bt_config(struct il_priv *il);
e7392364 1937extern int il_send_stats_request(struct il_priv *il, u8 flags, bool clear);
775ed8ab
SG
1938extern void il_apm_stop(struct il_priv *il);
1939extern void _il_apm_stop(struct il_priv *il);
1940
46bc8d4b 1941int il_apm_init(struct il_priv *il);
be663ab6 1942
83007196
SG
1943int il_send_rxon_timing(struct il_priv *il);
1944
e7392364 1945static inline int
83007196 1946il_send_rxon_assoc(struct il_priv *il)
be663ab6 1947{
c9363551 1948 return il->ops->rxon_assoc(il);
be663ab6 1949}
e7392364
SG
1950
1951static inline int
83007196 1952il_commit_rxon(struct il_priv *il)
be663ab6 1953{
c9363551 1954 return il->ops->commit_rxon(il);
be663ab6 1955}
e7392364
SG
1956
1957static inline const struct ieee80211_supported_band *
1958il_get_hw_mode(struct il_priv *il, enum ieee80211_band band)
be663ab6 1959{
46bc8d4b 1960 return il->hw->wiphy->bands[band];
be663ab6
WYG
1961}
1962
be663ab6 1963/* mac80211 handlers */
e2ebc833 1964int il_mac_config(struct ieee80211_hw *hw, u32 changed);
e7392364
SG
1965void il_mac_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
1966void il_mac_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1967 struct ieee80211_bss_conf *bss_conf, u32 changes);
1968void il_tx_cmd_protection(struct il_priv *il, struct ieee80211_tx_info *info,
1722f8e1 1969 __le16 fc, __le32 *tx_flags);
be663ab6 1970
e2ebc833 1971irqreturn_t il_isr(int irq, void *data);
be663ab6 1972
17d4eca6
SG
1973extern void il_set_bit(struct il_priv *p, u32 r, u32 m);
1974extern void il_clear_bit(struct il_priv *p, u32 r, u32 m);
1e0f32a4 1975extern bool _il_grab_nic_access(struct il_priv *il);
17d4eca6
SG
1976extern int _il_poll_bit(struct il_priv *il, u32 addr, u32 bits, u32 mask, int timeout);
1977extern int il_poll_bit(struct il_priv *il, u32 addr, u32 mask, int timeout);
1978extern u32 il_rd_prph(struct il_priv *il, u32 reg);
1979extern void il_wr_prph(struct il_priv *il, u32 addr, u32 val);
1980extern u32 il_read_targ_mem(struct il_priv *il, u32 addr);
1981extern void il_write_targ_mem(struct il_priv *il, u32 addr, u32 val);
e94a4099 1982
e7392364
SG
1983static inline void
1984_il_write8(struct il_priv *il, u32 ofs, u8 val)
e94a4099 1985{
a5f16137 1986 writeb(val, il->hw_base + ofs);
e94a4099
SG
1987}
1988#define il_write8(il, ofs, val) _il_write8(il, ofs, val)
1989
e7392364
SG
1990static inline void
1991_il_wr(struct il_priv *il, u32 ofs, u32 val)
e94a4099 1992{
a5f16137 1993 writel(val, il->hw_base + ofs);
e94a4099
SG
1994}
1995
e7392364
SG
1996static inline u32
1997_il_rd(struct il_priv *il, u32 ofs)
e94a4099 1998{
a5f16137 1999 return readl(il->hw_base + ofs);
e94a4099
SG
2000}
2001
e94a4099
SG
2002static inline void
2003_il_clear_bit(struct il_priv *il, u32 reg, u32 mask)
2004{
2005 _il_wr(il, reg, _il_rd(il, reg) & ~mask);
2006}
2007
e7392364 2008static inline void
17d4eca6 2009_il_set_bit(struct il_priv *il, u32 reg, u32 mask)
e94a4099 2010{
17d4eca6 2011 _il_wr(il, reg, _il_rd(il, reg) | mask);
e94a4099
SG
2012}
2013
e7392364
SG
2014static inline void
2015_il_release_nic_access(struct il_priv *il)
e94a4099 2016{
e7392364 2017 _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
4e5ea208
SG
2018 /*
2019 * In above we are reading CSR_GP_CNTRL register, what will flush any
2020 * previous writes, but still want write, which clear MAC_ACCESS_REQ
2021 * bit, be performed on PCI bus before any other writes scheduled on
2022 * different CPUs (after we drop reg_lock).
2023 */
2024 mmiowb();
e94a4099
SG
2025}
2026
e7392364
SG
2027static inline u32
2028il_rd(struct il_priv *il, u32 reg)
e94a4099
SG
2029{
2030 u32 value;
2031 unsigned long reg_flags;
2032
2033 spin_lock_irqsave(&il->reg_lock, reg_flags);
2034 _il_grab_nic_access(il);
2035 value = _il_rd(il, reg);
2036 _il_release_nic_access(il);
2037 spin_unlock_irqrestore(&il->reg_lock, reg_flags);
2038 return value;
e94a4099
SG
2039}
2040
2041static inline void
2042il_wr(struct il_priv *il, u32 reg, u32 value)
2043{
2044 unsigned long reg_flags;
2045
2046 spin_lock_irqsave(&il->reg_lock, reg_flags);
1e0f32a4 2047 if (likely(_il_grab_nic_access(il))) {
e94a4099
SG
2048 _il_wr(il, reg, value);
2049 _il_release_nic_access(il);
2050 }
2051 spin_unlock_irqrestore(&il->reg_lock, reg_flags);
2052}
2053
e7392364
SG
2054static inline u32
2055_il_rd_prph(struct il_priv *il, u32 reg)
e94a4099
SG
2056{
2057 _il_wr(il, HBUS_TARG_PRPH_RADDR, reg | (3 << 24));
e94a4099
SG
2058 return _il_rd(il, HBUS_TARG_PRPH_RDAT);
2059}
2060
e7392364
SG
2061static inline void
2062_il_wr_prph(struct il_priv *il, u32 addr, u32 val)
e94a4099 2063{
e7392364 2064 _il_wr(il, HBUS_TARG_PRPH_WADDR, ((addr & 0x0000FFFF) | (3 << 24)));
e94a4099
SG
2065 _il_wr(il, HBUS_TARG_PRPH_WDAT, val);
2066}
2067
e94a4099
SG
2068static inline void
2069il_set_bits_prph(struct il_priv *il, u32 reg, u32 mask)
2070{
2071 unsigned long reg_flags;
2072
2073 spin_lock_irqsave(&il->reg_lock, reg_flags);
1e0f32a4
SG
2074 if (likely(_il_grab_nic_access(il))) {
2075 _il_wr_prph(il, reg, (_il_rd_prph(il, reg) | mask));
2076 _il_release_nic_access(il);
2077 }
e94a4099
SG
2078 spin_unlock_irqrestore(&il->reg_lock, reg_flags);
2079}
2080
e7392364
SG
2081static inline void
2082il_set_bits_mask_prph(struct il_priv *il, u32 reg, u32 bits, u32 mask)
e94a4099
SG
2083{
2084 unsigned long reg_flags;
2085
2086 spin_lock_irqsave(&il->reg_lock, reg_flags);
1e0f32a4
SG
2087 if (likely(_il_grab_nic_access(il))) {
2088 _il_wr_prph(il, reg, ((_il_rd_prph(il, reg) & mask) | bits));
2089 _il_release_nic_access(il);
2090 }
e94a4099
SG
2091 spin_unlock_irqrestore(&il->reg_lock, reg_flags);
2092}
2093
e7392364
SG
2094static inline void
2095il_clear_bits_prph(struct il_priv *il, u32 reg, u32 mask)
e94a4099
SG
2096{
2097 unsigned long reg_flags;
2098 u32 val;
2099
2100 spin_lock_irqsave(&il->reg_lock, reg_flags);
1e0f32a4
SG
2101 if (likely(_il_grab_nic_access(il))) {
2102 val = _il_rd_prph(il, reg);
2103 _il_wr_prph(il, reg, (val & ~mask));
2104 _il_release_nic_access(il);
2105 }
e94a4099
SG
2106 spin_unlock_irqrestore(&il->reg_lock, reg_flags);
2107}
2108
e94a4099
SG
2109#define HW_KEY_DYNAMIC 0
2110#define HW_KEY_DEFAULT 1
2111
e7392364
SG
2112#define IL_STA_DRIVER_ACTIVE BIT(0) /* driver entry is active */
2113#define IL_STA_UCODE_ACTIVE BIT(1) /* ucode entry is active */
2114#define IL_STA_UCODE_INPROGRESS BIT(2) /* ucode entry is in process of
2115 being activated */
2116#define IL_STA_LOCAL BIT(3) /* station state not directed by mac80211;
2117 (this is for the IBSS BSSID stations) */
2118#define IL_STA_BCAST BIT(4) /* this station is the special bcast station */
e94a4099 2119
83007196
SG
2120void il_restore_stations(struct il_priv *il);
2121void il_clear_ucode_stations(struct il_priv *il);
e94a4099
SG
2122void il_dealloc_bcast_stations(struct il_priv *il);
2123int il_get_free_ucode_key_idx(struct il_priv *il);
e7392364 2124int il_send_add_sta(struct il_priv *il, struct il_addsta_cmd *sta, u8 flags);
83007196 2125int il_add_station_common(struct il_priv *il, const u8 *addr, bool is_ap,
1722f8e1 2126 struct ieee80211_sta *sta, u8 *sta_id_r);
e7392364
SG
2127int il_remove_station(struct il_priv *il, const u8 sta_id, const u8 * addr);
2128int il_mac_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
2129 struct ieee80211_sta *sta);
2130
83007196
SG
2131u8 il_prep_station(struct il_priv *il, const u8 *addr, bool is_ap,
2132 struct ieee80211_sta *sta);
e7392364 2133
83007196
SG
2134int il_send_lq_cmd(struct il_priv *il, struct il_link_quality_cmd *lq,
2135 u8 flags, bool init);
e94a4099
SG
2136
2137/**
2138 * il_clear_driver_stations - clear knowledge of all stations from driver
2139 * @il: iwl il struct
2140 *
2141 * This is called during il_down() to make sure that in the case
2142 * we're coming there from a hardware restart mac80211 will be
2143 * able to reconfigure stations -- if we're getting there in the
2144 * normal down flow then the stations will already be cleared.
2145 */
e7392364
SG
2146static inline void
2147il_clear_driver_stations(struct il_priv *il)
e94a4099
SG
2148{
2149 unsigned long flags;
e94a4099
SG
2150
2151 spin_lock_irqsave(&il->sta_lock, flags);
2152 memset(il->stations, 0, sizeof(il->stations));
2153 il->num_stations = 0;
e94a4099 2154 il->ucode_key_table = 0;
e94a4099
SG
2155 spin_unlock_irqrestore(&il->sta_lock, flags);
2156}
2157
e7392364
SG
2158static inline int
2159il_sta_id(struct ieee80211_sta *sta)
e94a4099
SG
2160{
2161 if (WARN_ON(!sta))
2162 return IL_INVALID_STATION;
2163
2164 return ((struct il_station_priv_common *)sta->drv_priv)->sta_id;
2165}
2166
2167/**
2168 * il_sta_id_or_broadcast - return sta_id or broadcast sta
2169 * @il: iwl il
2170 * @context: the current context
2171 * @sta: mac80211 station
2172 *
2173 * In certain circumstances mac80211 passes a station pointer
2174 * that may be %NULL, for example during TX or key setup. In
2175 * that case, we need to use the broadcast station, so this
2176 * inline wraps that pattern.
2177 */
e7392364 2178static inline int
83007196 2179il_sta_id_or_broadcast(struct il_priv *il, struct ieee80211_sta *sta)
e94a4099
SG
2180{
2181 int sta_id;
2182
2183 if (!sta)
b16db50a 2184 return il->hw_params.bcast_id;
e94a4099
SG
2185
2186 sta_id = il_sta_id(sta);
2187
2188 /*
2189 * mac80211 should not be passing a partially
2190 * initialised station!
2191 */
2192 WARN_ON(sta_id == IL_INVALID_STATION);
2193
2194 return sta_id;
2195}
2196
2197/**
2198 * il_queue_inc_wrap - increment queue idx, wrap back to beginning
2199 * @idx -- current idx
2200 * @n_bd -- total number of entries in queue (must be power of 2)
2201 */
e7392364
SG
2202static inline int
2203il_queue_inc_wrap(int idx, int n_bd)
e94a4099
SG
2204{
2205 return ++idx & (n_bd - 1);
2206}
2207
2208/**
2209 * il_queue_dec_wrap - decrement queue idx, wrap back to end
2210 * @idx -- current idx
2211 * @n_bd -- total number of entries in queue (must be power of 2)
2212 */
e7392364
SG
2213static inline int
2214il_queue_dec_wrap(int idx, int n_bd)
e94a4099
SG
2215{
2216 return --idx & (n_bd - 1);
2217}
2218
2219/* TODO: Move fw_desc functions to iwl-pci.ko */
e7392364
SG
2220static inline void
2221il_free_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc)
e94a4099
SG
2222{
2223 if (desc->v_addr)
e7392364
SG
2224 dma_free_coherent(&pci_dev->dev, desc->len, desc->v_addr,
2225 desc->p_addr);
e94a4099
SG
2226 desc->v_addr = NULL;
2227 desc->len = 0;
2228}
2229
e7392364
SG
2230static inline int
2231il_alloc_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc)
e94a4099
SG
2232{
2233 if (!desc->len) {
2234 desc->v_addr = NULL;
2235 return -EINVAL;
2236 }
2237
1f9061d2
JP
2238 desc->v_addr = dma_alloc_coherent(&pci_dev->dev, desc->len,
2239 &desc->p_addr, GFP_KERNEL);
e94a4099
SG
2240 return (desc->v_addr != NULL) ? 0 : -ENOMEM;
2241}
2242
2243/*
2244 * we have 8 bits used like this:
2245 *
2246 * 7 6 5 4 3 2 1 0
2247 * | | | | | | | |
2248 * | | | | | | +-+-------- AC queue (0-3)
2249 * | | | | | |
2250 * | +-+-+-+-+------------ HW queue ID
2251 * |
2252 * +---------------------- unused
2253 */
2254static inline void
2255il_set_swq_id(struct il_tx_queue *txq, u8 ac, u8 hwq)
2256{
e7392364
SG
2257 BUG_ON(ac > 3); /* only have 2 bits */
2258 BUG_ON(hwq > 31); /* only use 5 bits */
e94a4099
SG
2259
2260 txq->swq_id = (hwq << 2) | ac;
2261}
2262
e7392364
SG
2263static inline void
2264il_wake_queue(struct il_priv *il, struct il_tx_queue *txq)
e94a4099
SG
2265{
2266 u8 queue = txq->swq_id;
2267 u8 ac = queue & 3;
2268 u8 hwq = (queue >> 2) & 0x1f;
2269
2270 if (test_and_clear_bit(hwq, il->queue_stopped))
2271 if (atomic_dec_return(&il->queue_stop_count[ac]) <= 0)
2272 ieee80211_wake_queue(il->hw, ac);
2273}
2274
e7392364
SG
2275static inline void
2276il_stop_queue(struct il_priv *il, struct il_tx_queue *txq)
e94a4099
SG
2277{
2278 u8 queue = txq->swq_id;
2279 u8 ac = queue & 3;
2280 u8 hwq = (queue >> 2) & 0x1f;
2281
2282 if (!test_and_set_bit(hwq, il->queue_stopped))
2283 if (atomic_inc_return(&il->queue_stop_count[ac]) > 0)
2284 ieee80211_stop_queue(il->hw, ac);
2285}
2286
2287#ifdef ieee80211_stop_queue
2288#undef ieee80211_stop_queue
2289#endif
2290
2291#define ieee80211_stop_queue DO_NOT_USE_ieee80211_stop_queue
2292
2293#ifdef ieee80211_wake_queue
2294#undef ieee80211_wake_queue
2295#endif
2296
2297#define ieee80211_wake_queue DO_NOT_USE_ieee80211_wake_queue
2298
e7392364
SG
2299static inline void
2300il_disable_interrupts(struct il_priv *il)
e94a4099
SG
2301{
2302 clear_bit(S_INT_ENABLED, &il->status);
2303
2304 /* disable interrupts from uCode/NIC to host */
2305 _il_wr(il, CSR_INT_MASK, 0x00000000);
2306
2307 /* acknowledge/clear/reset any interrupts still pending
2308 * from uCode or flow handler (Rx/Tx DMA) */
2309 _il_wr(il, CSR_INT, 0xffffffff);
2310 _il_wr(il, CSR_FH_INT_STATUS, 0xffffffff);
e94a4099
SG
2311}
2312
e7392364
SG
2313static inline void
2314il_enable_rfkill_int(struct il_priv *il)
e94a4099 2315{
e94a4099
SG
2316 _il_wr(il, CSR_INT_MASK, CSR_INT_BIT_RF_KILL);
2317}
2318
e7392364
SG
2319static inline void
2320il_enable_interrupts(struct il_priv *il)
e94a4099 2321{
e94a4099
SG
2322 set_bit(S_INT_ENABLED, &il->status);
2323 _il_wr(il, CSR_INT_MASK, il->inta_mask);
2324}
2325
2326/**
2327 * il_beacon_time_mask_low - mask of lower 32 bit of beacon time
2328 * @il -- pointer to il_priv data structure
2329 * @tsf_bits -- number of bits need to shift for masking)
2330 */
e7392364
SG
2331static inline u32
2332il_beacon_time_mask_low(struct il_priv *il, u16 tsf_bits)
e94a4099
SG
2333{
2334 return (1 << tsf_bits) - 1;
2335}
2336
2337/**
2338 * il_beacon_time_mask_high - mask of higher 32 bit of beacon time
2339 * @il -- pointer to il_priv data structure
2340 * @tsf_bits -- number of bits need to shift for masking)
2341 */
e7392364
SG
2342static inline u32
2343il_beacon_time_mask_high(struct il_priv *il, u16 tsf_bits)
e94a4099
SG
2344{
2345 return ((1 << (32 - tsf_bits)) - 1) << tsf_bits;
2346}
2347
2348/**
2349 * struct il_rb_status - reseve buffer status host memory mapped FH registers
2350 *
2351 * @closed_rb_num [0:11] - Indicates the idx of the RB which was closed
2352 * @closed_fr_num [0:11] - Indicates the idx of the RX Frame which was closed
2353 * @finished_rb_num [0:11] - Indicates the idx of the current RB
2354 * in which the last frame was written to
2355 * @finished_fr_num [0:11] - Indicates the idx of the RX Frame
2356 * which was transferred
2357 */
2358struct il_rb_status {
2359 __le16 closed_rb_num;
2360 __le16 closed_fr_num;
2361 __le16 finished_rb_num;
2362 __le16 finished_fr_nam;
e7392364 2363 __le32 __unused; /* 3945 only */
e94a4099
SG
2364} __packed;
2365
d87c771f
SG
2366#define TFD_QUEUE_SIZE_MAX 256
2367#define TFD_QUEUE_SIZE_BC_DUP 64
e94a4099 2368#define TFD_QUEUE_BC_SIZE (TFD_QUEUE_SIZE_MAX + TFD_QUEUE_SIZE_BC_DUP)
d87c771f 2369#define IL_TX_DMA_MASK DMA_BIT_MASK(36)
e94a4099
SG
2370#define IL_NUM_OF_TBS 20
2371
e7392364
SG
2372static inline u8
2373il_get_dma_hi_addr(dma_addr_t addr)
e94a4099
SG
2374{
2375 return (sizeof(addr) > sizeof(u32) ? (addr >> 16) >> 16 : 0) & 0xF;
2376}
e7392364 2377
e94a4099
SG
2378/**
2379 * struct il_tfd_tb transmit buffer descriptor within transmit frame descriptor
2380 *
2381 * This structure contains dma address and length of transmission address
2382 *
1722f8e1
SG
2383 * @lo: low [31:0] portion of the dma address of TX buffer every even is
2384 * unaligned on 16 bit boundary
2385 * @hi_n_len: 0-3 [35:32] portion of dma
2386 * 4-15 length of the tx buffer
e94a4099
SG
2387 */
2388struct il_tfd_tb {
2389 __le32 lo;
2390 __le16 hi_n_len;
2391} __packed;
2392
2393/**
2394 * struct il_tfd
2395 *
2396 * Transmit Frame Descriptor (TFD)
2397 *
2398 * @ __reserved1[3] reserved
2399 * @ num_tbs 0-4 number of active tbs
2400 * 5 reserved
2401 * 6-7 padding (not used)
2402 * @ tbs[20] transmit frame buffer descriptors
1722f8e1 2403 * @ __pad padding
e94a4099
SG
2404 *
2405 * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM.
2406 * Both driver and device share these circular buffers, each of which must be
2407 * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes
2408 *
2409 * Driver must indicate the physical address of the base of each
9a95b370 2410 * circular buffer via the FH49_MEM_CBBC_QUEUE registers.
e94a4099
SG
2411 *
2412 * Each TFD contains pointer/size information for up to 20 data buffers
2413 * in host DRAM. These buffers collectively contain the (one) frame described
2414 * by the TFD. Each buffer must be a single contiguous block of memory within
2415 * itself, but buffers may be scattered in host DRAM. Each buffer has max size
2416 * of (4K - 4). The concatenates all of a TFD's buffers into a single
2417 * Tx frame, up to 8 KBytes in size.
2418 *
2419 * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx.
2420 */
2421struct il_tfd {
2422 u8 __reserved1[3];
2423 u8 num_tbs;
2424 struct il_tfd_tb tbs[IL_NUM_OF_TBS];
2425 __le32 __pad;
2426} __packed;
2427/* PCI registers */
2428#define PCI_CFG_RETRY_TIMEOUT 0x041
2429
3fbbf9a8 2430struct il_rate_info {
e7392364
SG
2431 u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */
2432 u8 plcp_siso; /* uCode API: RATE_SISO_6M_PLCP, etc. */
2433 u8 plcp_mimo2; /* uCode API: RATE_MIMO2_6M_PLCP, etc. */
2434 u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */
2435 u8 prev_ieee; /* previous rate in IEEE speeds */
2436 u8 next_ieee; /* next rate in IEEE speeds */
2437 u8 prev_rs; /* previous rate used in rs algo */
2438 u8 next_rs; /* next rate used in rs algo */
2439 u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
2440 u8 next_rs_tgg; /* next rate used in TGG rs algo */
3fbbf9a8
SG
2441};
2442
2443struct il3945_rate_info {
2444 u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */
2445 u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */
2446 u8 prev_ieee; /* previous rate in IEEE speeds */
2447 u8 next_ieee; /* next rate in IEEE speeds */
2448 u8 prev_rs; /* previous rate used in rs algo */
2449 u8 next_rs; /* next rate used in rs algo */
2450 u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
2451 u8 next_rs_tgg; /* next rate used in TGG rs algo */
2452 u8 table_rs_idx; /* idx in rate scale table cmd */
2453 u8 prev_table_rs; /* prev in rate table cmd */
2454};
2455
3fbbf9a8
SG
2456/*
2457 * These serve as idxes into
2458 * struct il_rate_info il_rates[RATE_COUNT];
2459 */
2460enum {
2461 RATE_1M_IDX = 0,
2462 RATE_2M_IDX,
2463 RATE_5M_IDX,
2464 RATE_11M_IDX,
2465 RATE_6M_IDX,
2466 RATE_9M_IDX,
2467 RATE_12M_IDX,
2468 RATE_18M_IDX,
2469 RATE_24M_IDX,
2470 RATE_36M_IDX,
2471 RATE_48M_IDX,
2472 RATE_54M_IDX,
2473 RATE_60M_IDX,
2474 RATE_COUNT,
2475 RATE_COUNT_LEGACY = RATE_COUNT - 1, /* Excluding 60M */
2476 RATE_COUNT_3945 = RATE_COUNT - 1,
2477 RATE_INVM_IDX = RATE_COUNT,
2478 RATE_INVALID = RATE_COUNT,
2479};
2480
2481enum {
2482 RATE_6M_IDX_TBL = 0,
2483 RATE_9M_IDX_TBL,
2484 RATE_12M_IDX_TBL,
2485 RATE_18M_IDX_TBL,
2486 RATE_24M_IDX_TBL,
2487 RATE_36M_IDX_TBL,
2488 RATE_48M_IDX_TBL,
2489 RATE_54M_IDX_TBL,
2490 RATE_1M_IDX_TBL,
2491 RATE_2M_IDX_TBL,
2492 RATE_5M_IDX_TBL,
2493 RATE_11M_IDX_TBL,
2494 RATE_INVM_IDX_TBL = RATE_INVM_IDX - 1,
2495};
2496
2497enum {
2498 IL_FIRST_OFDM_RATE = RATE_6M_IDX,
2499 IL39_LAST_OFDM_RATE = RATE_54M_IDX,
2500 IL_LAST_OFDM_RATE = RATE_60M_IDX,
2501 IL_FIRST_CCK_RATE = RATE_1M_IDX,
2502 IL_LAST_CCK_RATE = RATE_11M_IDX,
2503};
2504
2505/* #define vs. enum to keep from defaulting to 'large integer' */
2506#define RATE_6M_MASK (1 << RATE_6M_IDX)
2507#define RATE_9M_MASK (1 << RATE_9M_IDX)
2508#define RATE_12M_MASK (1 << RATE_12M_IDX)
2509#define RATE_18M_MASK (1 << RATE_18M_IDX)
2510#define RATE_24M_MASK (1 << RATE_24M_IDX)
2511#define RATE_36M_MASK (1 << RATE_36M_IDX)
2512#define RATE_48M_MASK (1 << RATE_48M_IDX)
2513#define RATE_54M_MASK (1 << RATE_54M_IDX)
2514#define RATE_60M_MASK (1 << RATE_60M_IDX)
2515#define RATE_1M_MASK (1 << RATE_1M_IDX)
2516#define RATE_2M_MASK (1 << RATE_2M_IDX)
2517#define RATE_5M_MASK (1 << RATE_5M_IDX)
2518#define RATE_11M_MASK (1 << RATE_11M_IDX)
2519
2520/* uCode API values for legacy bit rates, both OFDM and CCK */
2521enum {
e7392364
SG
2522 RATE_6M_PLCP = 13,
2523 RATE_9M_PLCP = 15,
3fbbf9a8
SG
2524 RATE_12M_PLCP = 5,
2525 RATE_18M_PLCP = 7,
2526 RATE_24M_PLCP = 9,
2527 RATE_36M_PLCP = 11,
2528 RATE_48M_PLCP = 1,
2529 RATE_54M_PLCP = 3,
e7392364
SG
2530 RATE_60M_PLCP = 3, /*FIXME:RS:should be removed */
2531 RATE_1M_PLCP = 10,
2532 RATE_2M_PLCP = 20,
2533 RATE_5M_PLCP = 55,
3fbbf9a8 2534 RATE_11M_PLCP = 110,
e7392364 2535 /*FIXME:RS:add RATE_LEGACY_INVM_PLCP = 0, */
3fbbf9a8
SG
2536};
2537
2538/* uCode API values for OFDM high-throughput (HT) bit rates */
2539enum {
2540 RATE_SISO_6M_PLCP = 0,
2541 RATE_SISO_12M_PLCP = 1,
2542 RATE_SISO_18M_PLCP = 2,
2543 RATE_SISO_24M_PLCP = 3,
2544 RATE_SISO_36M_PLCP = 4,
2545 RATE_SISO_48M_PLCP = 5,
2546 RATE_SISO_54M_PLCP = 6,
2547 RATE_SISO_60M_PLCP = 7,
e7392364 2548 RATE_MIMO2_6M_PLCP = 0x8,
3fbbf9a8
SG
2549 RATE_MIMO2_12M_PLCP = 0x9,
2550 RATE_MIMO2_18M_PLCP = 0xa,
2551 RATE_MIMO2_24M_PLCP = 0xb,
2552 RATE_MIMO2_36M_PLCP = 0xc,
2553 RATE_MIMO2_48M_PLCP = 0xd,
2554 RATE_MIMO2_54M_PLCP = 0xe,
2555 RATE_MIMO2_60M_PLCP = 0xf,
2556 RATE_SISO_INVM_PLCP,
2557 RATE_MIMO2_INVM_PLCP = RATE_SISO_INVM_PLCP,
2558};
2559
2560/* MAC header values for bit rates */
2561enum {
e7392364
SG
2562 RATE_6M_IEEE = 12,
2563 RATE_9M_IEEE = 18,
3fbbf9a8
SG
2564 RATE_12M_IEEE = 24,
2565 RATE_18M_IEEE = 36,
2566 RATE_24M_IEEE = 48,
2567 RATE_36M_IEEE = 72,
2568 RATE_48M_IEEE = 96,
2569 RATE_54M_IEEE = 108,
2570 RATE_60M_IEEE = 120,
e7392364
SG
2571 RATE_1M_IEEE = 2,
2572 RATE_2M_IEEE = 4,
2573 RATE_5M_IEEE = 11,
3fbbf9a8
SG
2574 RATE_11M_IEEE = 22,
2575};
2576
2577#define IL_CCK_BASIC_RATES_MASK \
2578 (RATE_1M_MASK | \
2579 RATE_2M_MASK)
2580
2581#define IL_CCK_RATES_MASK \
2582 (IL_CCK_BASIC_RATES_MASK | \
2583 RATE_5M_MASK | \
2584 RATE_11M_MASK)
2585
2586#define IL_OFDM_BASIC_RATES_MASK \
2587 (RATE_6M_MASK | \
2588 RATE_12M_MASK | \
2589 RATE_24M_MASK)
2590
2591#define IL_OFDM_RATES_MASK \
2592 (IL_OFDM_BASIC_RATES_MASK | \
2593 RATE_9M_MASK | \
2594 RATE_18M_MASK | \
2595 RATE_36M_MASK | \
2596 RATE_48M_MASK | \
2597 RATE_54M_MASK)
2598
2599#define IL_BASIC_RATES_MASK \
2600 (IL_OFDM_BASIC_RATES_MASK | \
2601 IL_CCK_BASIC_RATES_MASK)
2602
2603#define RATES_MASK ((1 << RATE_COUNT) - 1)
2604#define RATES_MASK_3945 ((1 << RATE_COUNT_3945) - 1)
2605
2606#define IL_INVALID_VALUE -1
2607
2608#define IL_MIN_RSSI_VAL -100
2609#define IL_MAX_RSSI_VAL 0
2610
2611/* These values specify how many Tx frame attempts before
2612 * searching for a new modulation mode */
2613#define IL_LEGACY_FAILURE_LIMIT 160
2614#define IL_LEGACY_SUCCESS_LIMIT 480
2615#define IL_LEGACY_TBL_COUNT 160
2616
2617#define IL_NONE_LEGACY_FAILURE_LIMIT 400
2618#define IL_NONE_LEGACY_SUCCESS_LIMIT 4500
2619#define IL_NONE_LEGACY_TBL_COUNT 1500
2620
2621/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
2622#define IL_RS_GOOD_RATIO 12800 /* 100% */
2623#define RATE_SCALE_SWITCH 10880 /* 85% */
2624#define RATE_HIGH_TH 10880 /* 85% */
2625#define RATE_INCREASE_TH 6400 /* 50% */
2626#define RATE_DECREASE_TH 1920 /* 15% */
2627
2628/* possible actions when in legacy mode */
2629#define IL_LEGACY_SWITCH_ANTENNA1 0
2630#define IL_LEGACY_SWITCH_ANTENNA2 1
2631#define IL_LEGACY_SWITCH_SISO 2
2632#define IL_LEGACY_SWITCH_MIMO2_AB 3
2633#define IL_LEGACY_SWITCH_MIMO2_AC 4
2634#define IL_LEGACY_SWITCH_MIMO2_BC 5
2635
2636/* possible actions when in siso mode */
2637#define IL_SISO_SWITCH_ANTENNA1 0
2638#define IL_SISO_SWITCH_ANTENNA2 1
2639#define IL_SISO_SWITCH_MIMO2_AB 2
2640#define IL_SISO_SWITCH_MIMO2_AC 3
2641#define IL_SISO_SWITCH_MIMO2_BC 4
2642#define IL_SISO_SWITCH_GI 5
2643
2644/* possible actions when in mimo mode */
2645#define IL_MIMO2_SWITCH_ANTENNA1 0
2646#define IL_MIMO2_SWITCH_ANTENNA2 1
2647#define IL_MIMO2_SWITCH_SISO_A 2
2648#define IL_MIMO2_SWITCH_SISO_B 3
2649#define IL_MIMO2_SWITCH_SISO_C 4
2650#define IL_MIMO2_SWITCH_GI 5
2651
2652#define IL_MAX_SEARCH IL_MIMO2_SWITCH_GI
2653
2654#define IL_ACTION_LIMIT 3 /* # possible actions */
2655
2656#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */
2657
2658/* load per tid defines for A-MPDU activation */
2659#define IL_AGG_TPT_THREHOLD 0
2660#define IL_AGG_LOAD_THRESHOLD 10
2661#define IL_AGG_ALL_TID 0xff
2662#define TID_QUEUE_CELL_SPACING 50 /*mS */
2663#define TID_QUEUE_MAX_SIZE 20
2664#define TID_ROUND_VALUE 5 /* mS */
2665#define TID_MAX_LOAD_COUNT 8
2666
2667#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
2668#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
2669
2670extern const struct il_rate_info il_rates[RATE_COUNT];
2671
2672enum il_table_type {
2673 LQ_NONE,
e7392364 2674 LQ_G, /* legacy types */
3fbbf9a8 2675 LQ_A,
e7392364 2676 LQ_SISO, /* high-throughput types */
3fbbf9a8
SG
2677 LQ_MIMO2,
2678 LQ_MAX,
2679};
2680
2681#define is_legacy(tbl) ((tbl) == LQ_G || (tbl) == LQ_A)
2682#define is_siso(tbl) ((tbl) == LQ_SISO)
2683#define is_mimo2(tbl) ((tbl) == LQ_MIMO2)
2684#define is_mimo(tbl) (is_mimo2(tbl))
2685#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl))
2686#define is_a_band(tbl) ((tbl) == LQ_A)
2687#define is_g_and(tbl) ((tbl) == LQ_G)
2688
2689#define ANT_NONE 0x0
2690#define ANT_A BIT(0)
2691#define ANT_B BIT(1)
2692#define ANT_AB (ANT_A | ANT_B)
2693#define ANT_C BIT(2)
2694#define ANT_AC (ANT_A | ANT_C)
2695#define ANT_BC (ANT_B | ANT_C)
2696#define ANT_ABC (ANT_AB | ANT_C)
2697
2698#define IL_MAX_MCS_DISPLAY_SIZE 12
2699
2700struct il_rate_mcs_info {
e7392364
SG
2701 char mbps[IL_MAX_MCS_DISPLAY_SIZE];
2702 char mcs[IL_MAX_MCS_DISPLAY_SIZE];
3fbbf9a8
SG
2703};
2704
2705/**
2706 * struct il_rate_scale_data -- tx success history for one rate
2707 */
2708struct il_rate_scale_data {
2709 u64 data; /* bitmap of successful frames */
2710 s32 success_counter; /* number of frames successful */
2711 s32 success_ratio; /* per-cent * 128 */
2712 s32 counter; /* number of frames attempted */
2713 s32 average_tpt; /* success ratio * expected throughput */
2714 unsigned long stamp;
2715};
2716
2717/**
2718 * struct il_scale_tbl_info -- tx params and success history for all rates
2719 *
2720 * There are two of these in struct il_lq_sta,
2721 * one for "active", and one for "search".
2722 */
2723struct il_scale_tbl_info {
2724 enum il_table_type lq_type;
2725 u8 ant_type;
e7392364
SG
2726 u8 is_SGI; /* 1 = short guard interval */
2727 u8 is_ht40; /* 1 = 40 MHz channel width */
2728 u8 is_dup; /* 1 = duplicated data streams */
2729 u8 action; /* change modulation; IL_[LEGACY/SISO/MIMO]_SWITCH_* */
2730 u8 max_search; /* maximun number of tables we can search */
3fbbf9a8 2731 s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */
e7392364
SG
2732 u32 current_rate; /* rate_n_flags, uCode API format */
2733 struct il_rate_scale_data win[RATE_COUNT]; /* rate histories */
3fbbf9a8
SG
2734};
2735
2736struct il_traffic_load {
2737 unsigned long time_stamp; /* age of the oldest stats */
e7392364 2738 u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time
3fbbf9a8 2739 * slice */
e7392364
SG
2740 u32 total; /* total num of packets during the
2741 * last TID_MAX_TIME_DIFF */
2742 u8 queue_count; /* number of queues that has
2743 * been used since the last cleanup */
2744 u8 head; /* start of the circular buffer */
3fbbf9a8
SG
2745};
2746
2747/**
2748 * struct il_lq_sta -- driver's rate scaling ilate structure
2749 *
2750 * Pointer to this gets passed back and forth between driver and mac80211.
2751 */
2752struct il_lq_sta {
2753 u8 active_tbl; /* idx of active table, range 0-1 */
2754 u8 enable_counter; /* indicates HT mode */
2755 u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */
2756 u8 search_better_tbl; /* 1: currently trying alternate mode */
2757 s32 last_tpt;
2758
2759 /* The following determine when to search for a new mode */
2760 u32 table_count_limit;
2761 u32 max_failure_limit; /* # failed frames before new search */
2762 u32 max_success_limit; /* # successful frames before new search */
2763 u32 table_count;
2764 u32 total_failed; /* total failed frames, any/all rates */
2765 u32 total_success; /* total successful frames, any/all rates */
2766 u64 flush_timer; /* time staying in mode before new search */
2767
2768 u8 action_counter; /* # mode-switch actions tried */
2769 u8 is_green;
2770 u8 is_dup;
2771 enum ieee80211_band band;
2772
2773 /* The following are bitmaps of rates; RATE_6M_MASK, etc. */
2774 u32 supp_rates;
2775 u16 active_legacy_rate;
2776 u16 active_siso_rate;
2777 u16 active_mimo2_rate;
e7392364 2778 s8 max_rate_idx; /* Max rate set by user */
3fbbf9a8
SG
2779 u8 missed_rate_counter;
2780
2781 struct il_link_quality_cmd lq;
e7392364 2782 struct il_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
3fbbf9a8
SG
2783 struct il_traffic_load load[TID_MAX_LOAD_COUNT];
2784 u8 tx_agg_tid_en;
2785#ifdef CONFIG_MAC80211_DEBUGFS
2786 struct dentry *rs_sta_dbgfs_scale_table_file;
2787 struct dentry *rs_sta_dbgfs_stats_table_file;
2788 struct dentry *rs_sta_dbgfs_rate_scale_data_file;
2789 struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
2790 u32 dbg_fixed_rate;
2791#endif
2792 struct il_priv *drv;
2793
2794 /* used to be in sta_info */
2795 int last_txrate_idx;
2796 /* last tx rate_n_flags */
2797 u32 last_rate_n_flags;
2798 /* packets destined for this STA are aggregated */
2799 u8 is_agg;
2800};
2801
2802/*
2803 * il_station_priv: Driver's ilate station information
2804 *
2805 * When mac80211 creates a station it reserves some space (hw->sta_data_size)
2806 * in the structure for use by driver. This structure is places in that
2807 * space.
2808 *
2809 * The common struct MUST be first because it is shared between
2810 * 3945 and 4965!
2811 */
2812struct il_station_priv {
2813 struct il_station_priv_common common;
2814 struct il_lq_sta lq_sta;
2815 atomic_t pending_frames;
2816 bool client;
2817 bool asleep;
2818};
2819
e7392364
SG
2820static inline u8
2821il4965_num_of_ant(u8 m)
3fbbf9a8
SG
2822{
2823 return !!(m & ANT_A) + !!(m & ANT_B) + !!(m & ANT_C);
2824}
2825
e7392364
SG
2826static inline u8
2827il4965_first_antenna(u8 mask)
3fbbf9a8
SG
2828{
2829 if (mask & ANT_A)
2830 return ANT_A;
2831 if (mask & ANT_B)
2832 return ANT_B;
2833 return ANT_C;
2834}
2835
3fbbf9a8
SG
2836/**
2837 * il3945_rate_scale_init - Initialize the rate scale table based on assoc info
2838 *
2839 * The specific throughput table used is based on the type of network
2840 * the associated with, including A, B, G, and G w/ TGG protection
2841 */
2842extern void il3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id);
2843
2844/* Initialize station's rate scaling information after adding station */
e7392364
SG
2845extern void il4965_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta,
2846 u8 sta_id);
2847extern void il3945_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta,
2848 u8 sta_id);
3fbbf9a8
SG
2849
2850/**
2851 * il_rate_control_register - Register the rate control algorithm callbacks
2852 *
2853 * Since the rate control algorithm is hardware specific, there is no need
2854 * or reason to place it as a stand alone module. The driver can call
2855 * il_rate_control_register in order to register the rate control callbacks
2856 * with the mac80211 subsystem. This should be performed prior to calling
2857 * ieee80211_register_hw
2858 *
2859 */
2860extern int il4965_rate_control_register(void);
2861extern int il3945_rate_control_register(void);
2862
2863/**
2864 * il_rate_control_unregister - Unregister the rate control callbacks
2865 *
2866 * This should be called after calling ieee80211_unregister_hw, but before
2867 * the driver is unloaded.
2868 */
2869extern void il4965_rate_control_unregister(void);
2870extern void il3945_rate_control_unregister(void);
2871
99412002
SG
2872extern int il_power_update_mode(struct il_priv *il, bool force);
2873extern void il_power_initialize(struct il_priv *il);
47ef694d 2874
f02579e3
SG
2875extern u32 il_debug_level;
2876
2877#ifdef CONFIG_IWLEGACY_DEBUG
2878/*
2879 * il_get_debug_level: Return active debug level for device
2880 *
2881 * Using sysfs it is possible to set per device debug level. This debug
2882 * level will be used if set, otherwise the global debug level which can be
2883 * set via module parameter is used.
2884 */
e7392364
SG
2885static inline u32
2886il_get_debug_level(struct il_priv *il)
f02579e3
SG
2887{
2888 if (il->debug_level)
2889 return il->debug_level;
2890 else
2891 return il_debug_level;
2892}
2893#else
e7392364
SG
2894static inline u32
2895il_get_debug_level(struct il_priv *il)
f02579e3
SG
2896{
2897 return il_debug_level;
2898}
2899#endif
2900
2901#define il_print_hex_error(il, p, len) \
2902do { \
2903 print_hex_dump(KERN_ERR, "iwl data: ", \
2904 DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \
2905} while (0)
2906
2907#ifdef CONFIG_IWLEGACY_DEBUG
2908#define IL_DBG(level, fmt, args...) \
2909do { \
2910 if (il_get_debug_level(il) & level) \
6a4b09f8
JP
2911 dev_err(&il->hw->wiphy->dev, "%c %s " fmt, \
2912 in_interrupt() ? 'I' : 'U', __func__ , ##args); \
f02579e3
SG
2913} while (0)
2914
1722f8e1 2915#define il_print_hex_dump(il, level, p, len) \
f02579e3
SG
2916do { \
2917 if (il_get_debug_level(il) & level) \
2918 print_hex_dump(KERN_DEBUG, "iwl data: ", \
2919 DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \
2920} while (0)
2921
2922#else
2923#define IL_DBG(level, fmt, args...)
e7392364
SG
2924static inline void
2925il_print_hex_dump(struct il_priv *il, int level, const void *p, u32 len)
2926{
2927}
2928#endif /* CONFIG_IWLEGACY_DEBUG */
f02579e3
SG
2929
2930#ifdef CONFIG_IWLEGACY_DEBUGFS
2931int il_dbgfs_register(struct il_priv *il, const char *name);
2932void il_dbgfs_unregister(struct il_priv *il);
2933#else
2934static inline int
2935il_dbgfs_register(struct il_priv *il, const char *name)
2936{
2937 return 0;
2938}
e7392364
SG
2939
2940static inline void
2941il_dbgfs_unregister(struct il_priv *il)
f02579e3
SG
2942{
2943}
e7392364 2944#endif /* CONFIG_IWLEGACY_DEBUGFS */
f02579e3
SG
2945
2946/*
2947 * To use the debug system:
2948 *
2949 * If you are defining a new debug classification, simply add it to the #define
2950 * list here in the form of
2951 *
2952 * #define IL_DL_xxxx VALUE
2953 *
2954 * where xxxx should be the name of the classification (for example, WEP).
2955 *
2956 * You then need to either add a IL_xxxx_DEBUG() macro definition for your
2957 * classification, or use IL_DBG(IL_DL_xxxx, ...) whenever you want
2958 * to send output to that classification.
2959 *
2960 * The active debug levels can be accessed via files
2961 *
1722f8e1 2962 * /sys/module/iwl4965/parameters/debug
f02579e3 2963 * /sys/module/iwl3945/parameters/debug
1722f8e1 2964 * /sys/class/net/wlan0/device/debug_level
f02579e3
SG
2965 *
2966 * when CONFIG_IWLEGACY_DEBUG=y.
2967 */
2968
2969/* 0x0000000F - 0x00000001 */
2970#define IL_DL_INFO (1 << 0)
2971#define IL_DL_MAC80211 (1 << 1)
2972#define IL_DL_HCMD (1 << 2)
2973#define IL_DL_STATE (1 << 3)
2974/* 0x000000F0 - 0x00000010 */
2975#define IL_DL_MACDUMP (1 << 4)
2976#define IL_DL_HCMD_DUMP (1 << 5)
2977#define IL_DL_EEPROM (1 << 6)
2978#define IL_DL_RADIO (1 << 7)
2979/* 0x00000F00 - 0x00000100 */
2980#define IL_DL_POWER (1 << 8)
2981#define IL_DL_TEMP (1 << 9)
2982#define IL_DL_NOTIF (1 << 10)
2983#define IL_DL_SCAN (1 << 11)
2984/* 0x0000F000 - 0x00001000 */
2985#define IL_DL_ASSOC (1 << 12)
2986#define IL_DL_DROP (1 << 13)
2987#define IL_DL_TXPOWER (1 << 14)
2988#define IL_DL_AP (1 << 15)
2989/* 0x000F0000 - 0x00010000 */
2990#define IL_DL_FW (1 << 16)
2991#define IL_DL_RF_KILL (1 << 17)
2992#define IL_DL_FW_ERRORS (1 << 18)
2993#define IL_DL_LED (1 << 19)
2994/* 0x00F00000 - 0x00100000 */
2995#define IL_DL_RATE (1 << 20)
2996#define IL_DL_CALIB (1 << 21)
2997#define IL_DL_WEP (1 << 22)
2998#define IL_DL_TX (1 << 23)
2999/* 0x0F000000 - 0x01000000 */
3000#define IL_DL_RX (1 << 24)
3001#define IL_DL_ISR (1 << 25)
3002#define IL_DL_HT (1 << 26)
3003/* 0xF0000000 - 0x10000000 */
3004#define IL_DL_11H (1 << 28)
3005#define IL_DL_STATS (1 << 29)
3006#define IL_DL_TX_REPLY (1 << 30)
3007#define IL_DL_QOS (1 << 31)
3008
3009#define D_INFO(f, a...) IL_DBG(IL_DL_INFO, f, ## a)
3010#define D_MAC80211(f, a...) IL_DBG(IL_DL_MAC80211, f, ## a)
3011#define D_MACDUMP(f, a...) IL_DBG(IL_DL_MACDUMP, f, ## a)
3012#define D_TEMP(f, a...) IL_DBG(IL_DL_TEMP, f, ## a)
3013#define D_SCAN(f, a...) IL_DBG(IL_DL_SCAN, f, ## a)
3014#define D_RX(f, a...) IL_DBG(IL_DL_RX, f, ## a)
3015#define D_TX(f, a...) IL_DBG(IL_DL_TX, f, ## a)
3016#define D_ISR(f, a...) IL_DBG(IL_DL_ISR, f, ## a)
3017#define D_LED(f, a...) IL_DBG(IL_DL_LED, f, ## a)
3018#define D_WEP(f, a...) IL_DBG(IL_DL_WEP, f, ## a)
3019#define D_HC(f, a...) IL_DBG(IL_DL_HCMD, f, ## a)
3020#define D_HC_DUMP(f, a...) IL_DBG(IL_DL_HCMD_DUMP, f, ## a)
3021#define D_EEPROM(f, a...) IL_DBG(IL_DL_EEPROM, f, ## a)
3022#define D_CALIB(f, a...) IL_DBG(IL_DL_CALIB, f, ## a)
3023#define D_FW(f, a...) IL_DBG(IL_DL_FW, f, ## a)
3024#define D_RF_KILL(f, a...) IL_DBG(IL_DL_RF_KILL, f, ## a)
3025#define D_DROP(f, a...) IL_DBG(IL_DL_DROP, f, ## a)
3026#define D_AP(f, a...) IL_DBG(IL_DL_AP, f, ## a)
3027#define D_TXPOWER(f, a...) IL_DBG(IL_DL_TXPOWER, f, ## a)
3028#define D_RATE(f, a...) IL_DBG(IL_DL_RATE, f, ## a)
3029#define D_NOTIF(f, a...) IL_DBG(IL_DL_NOTIF, f, ## a)
3030#define D_ASSOC(f, a...) IL_DBG(IL_DL_ASSOC, f, ## a)
3031#define D_HT(f, a...) IL_DBG(IL_DL_HT, f, ## a)
3032#define D_STATS(f, a...) IL_DBG(IL_DL_STATS, f, ## a)
3033#define D_TX_REPLY(f, a...) IL_DBG(IL_DL_TX_REPLY, f, ## a)
3034#define D_QOS(f, a...) IL_DBG(IL_DL_QOS, f, ## a)
3035#define D_RADIO(f, a...) IL_DBG(IL_DL_RADIO, f, ## a)
3036#define D_POWER(f, a...) IL_DBG(IL_DL_POWER, f, ## a)
3037#define D_11H(f, a...) IL_DBG(IL_DL_11H, f, ## a)
3038
e2ebc833 3039#endif /* __il_core_h__ */
This page took 0.335403 seconds and 5 git commands to generate.