Commit | Line | Data |
---|---|---|
f6d92a05 | 1 | /* |
f6d92a05 AKG |
2 | * NOP USB transceiver for all USB transceiver which are either built-in |
3 | * into USB IP or which are mostly autonomous. | |
4 | * | |
5 | * Copyright (C) 2009 Texas Instruments Inc | |
6 | * Author: Ajay Kumar Gupta <ajay.gupta@ti.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation; either version 2 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
21 | * | |
22 | * Current status: | |
cc835e32 DB |
23 | * This provides a "nop" transceiver for PHYs which are |
24 | * autonomous such as isp1504, isp1707, etc. | |
f6d92a05 AKG |
25 | */ |
26 | ||
27 | #include <linux/module.h> | |
28 | #include <linux/platform_device.h> | |
29 | #include <linux/dma-mapping.h> | |
7acc9973 | 30 | #include <linux/usb/gadget.h> |
f6d92a05 | 31 | #include <linux/usb/otg.h> |
d7078df6 | 32 | #include <linux/usb/usb_phy_generic.h> |
5a0e3ad6 | 33 | #include <linux/slab.h> |
2319fb88 | 34 | #include <linux/clk.h> |
58f735fe | 35 | #include <linux/regulator/consumer.h> |
0eba3879 | 36 | #include <linux/of.h> |
bd27fa44 RQ |
37 | #include <linux/of_gpio.h> |
38 | #include <linux/gpio.h> | |
39 | #include <linux/delay.h> | |
f6d92a05 | 40 | |
53b6fc28 | 41 | #include "phy-generic.h" |
f6d92a05 | 42 | |
7acc9973 | 43 | #define VBUS_IRQ_FLAGS \ |
0f4ff5f1 RJ |
44 | (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \ |
45 | IRQF_ONESHOT) | |
7acc9973 | 46 | |
2f36ff69 | 47 | struct platform_device *usb_phy_generic_register(void) |
f6d92a05 | 48 | { |
2f36ff69 FB |
49 | return platform_device_register_simple("usb_phy_generic", |
50 | PLATFORM_DEVID_AUTO, NULL, 0); | |
f6d92a05 | 51 | } |
4525beeb | 52 | EXPORT_SYMBOL_GPL(usb_phy_generic_register); |
f6d92a05 | 53 | |
2f36ff69 | 54 | void usb_phy_generic_unregister(struct platform_device *pdev) |
f6d92a05 | 55 | { |
2f36ff69 | 56 | platform_device_unregister(pdev); |
f6d92a05 | 57 | } |
4525beeb | 58 | EXPORT_SYMBOL_GPL(usb_phy_generic_unregister); |
f6d92a05 | 59 | |
86753811 | 60 | static int nop_set_suspend(struct usb_phy *x, int suspend) |
f6d92a05 AKG |
61 | { |
62 | return 0; | |
63 | } | |
64 | ||
168bdb88 | 65 | static void nop_reset(struct usb_phy_generic *nop) |
bd27fa44 | 66 | { |
74379991 FE |
67 | if (!nop->gpiod_reset) |
68 | return; | |
bd27fa44 | 69 | |
168bdb88 | 70 | gpiod_set_value(nop->gpiod_reset, 1); |
74379991 | 71 | usleep_range(10000, 20000); |
168bdb88 | 72 | gpiod_set_value(nop->gpiod_reset, 0); |
bd27fa44 RQ |
73 | } |
74 | ||
7acc9973 RJ |
75 | /* interface to regulator framework */ |
76 | static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA) | |
77 | { | |
78 | struct regulator *vbus_draw = nop->vbus_draw; | |
79 | int enabled; | |
80 | int ret; | |
81 | ||
82 | if (!vbus_draw) | |
83 | return; | |
84 | ||
85 | enabled = nop->vbus_draw_enabled; | |
86 | if (mA) { | |
87 | regulator_set_current_limit(vbus_draw, 0, 1000 * mA); | |
88 | if (!enabled) { | |
89 | ret = regulator_enable(vbus_draw); | |
90 | if (ret < 0) | |
91 | return; | |
92 | nop->vbus_draw_enabled = 1; | |
93 | } | |
94 | } else { | |
95 | if (enabled) { | |
96 | ret = regulator_disable(vbus_draw); | |
97 | if (ret < 0) | |
98 | return; | |
99 | nop->vbus_draw_enabled = 0; | |
100 | } | |
101 | } | |
102 | nop->mA = mA; | |
103 | } | |
104 | ||
105 | ||
106 | static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) | |
107 | { | |
108 | struct usb_phy_generic *nop = data; | |
109 | struct usb_otg *otg = nop->phy.otg; | |
110 | int vbus, status; | |
111 | ||
112 | vbus = gpiod_get_value(nop->gpiod_vbus); | |
113 | if ((vbus ^ nop->vbus) == 0) | |
114 | return IRQ_HANDLED; | |
115 | nop->vbus = vbus; | |
116 | ||
117 | if (vbus) { | |
118 | status = USB_EVENT_VBUS; | |
119 | otg->state = OTG_STATE_B_PERIPHERAL; | |
120 | nop->phy.last_event = status; | |
2eafe93b MH |
121 | if (otg->gadget) |
122 | usb_gadget_vbus_connect(otg->gadget); | |
7acc9973 RJ |
123 | |
124 | /* drawing a "unit load" is *always* OK, except for OTG */ | |
125 | nop_set_vbus_draw(nop, 100); | |
126 | ||
127 | atomic_notifier_call_chain(&nop->phy.notifier, status, | |
128 | otg->gadget); | |
129 | } else { | |
130 | nop_set_vbus_draw(nop, 0); | |
131 | ||
2eafe93b MH |
132 | if (otg->gadget) |
133 | usb_gadget_vbus_disconnect(otg->gadget); | |
7acc9973 RJ |
134 | status = USB_EVENT_NONE; |
135 | otg->state = OTG_STATE_B_IDLE; | |
136 | nop->phy.last_event = status; | |
137 | ||
138 | atomic_notifier_call_chain(&nop->phy.notifier, status, | |
139 | otg->gadget); | |
140 | } | |
141 | return IRQ_HANDLED; | |
142 | } | |
143 | ||
53b6fc28 | 144 | int usb_gen_phy_init(struct usb_phy *phy) |
2319fb88 | 145 | { |
4525beeb | 146 | struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); |
7c113f7d | 147 | int ret; |
2319fb88 | 148 | |
58f735fe RQ |
149 | if (!IS_ERR(nop->vcc)) { |
150 | if (regulator_enable(nop->vcc)) | |
151 | dev_err(phy->dev, "Failed to enable power\n"); | |
152 | } | |
153 | ||
7c113f7d FE |
154 | if (!IS_ERR(nop->clk)) { |
155 | ret = clk_prepare_enable(nop->clk); | |
156 | if (ret) | |
157 | return ret; | |
158 | } | |
2319fb88 | 159 | |
168bdb88 | 160 | nop_reset(nop); |
ad63ebfc | 161 | |
2319fb88 RQ |
162 | return 0; |
163 | } | |
53b6fc28 | 164 | EXPORT_SYMBOL_GPL(usb_gen_phy_init); |
2319fb88 | 165 | |
53b6fc28 | 166 | void usb_gen_phy_shutdown(struct usb_phy *phy) |
2319fb88 | 167 | { |
4525beeb | 168 | struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); |
2319fb88 | 169 | |
168bdb88 | 170 | gpiod_set_value(nop->gpiod_reset, 1); |
ad63ebfc | 171 | |
2319fb88 | 172 | if (!IS_ERR(nop->clk)) |
4d175f34 | 173 | clk_disable_unprepare(nop->clk); |
58f735fe RQ |
174 | |
175 | if (!IS_ERR(nop->vcc)) { | |
176 | if (regulator_disable(nop->vcc)) | |
177 | dev_err(phy->dev, "Failed to disable power\n"); | |
178 | } | |
2319fb88 | 179 | } |
53b6fc28 | 180 | EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown); |
2319fb88 | 181 | |
41adf109 | 182 | static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) |
f6d92a05 | 183 | { |
41adf109 | 184 | if (!otg) |
f6d92a05 AKG |
185 | return -ENODEV; |
186 | ||
f6d92a05 | 187 | if (!gadget) { |
41adf109 | 188 | otg->gadget = NULL; |
f6d92a05 AKG |
189 | return -ENODEV; |
190 | } | |
191 | ||
41adf109 | 192 | otg->gadget = gadget; |
2eafe93b MH |
193 | if (otg->state == OTG_STATE_B_PERIPHERAL) |
194 | usb_gadget_vbus_connect(gadget); | |
195 | else | |
196 | otg->state = OTG_STATE_B_IDLE; | |
f6d92a05 AKG |
197 | return 0; |
198 | } | |
199 | ||
41adf109 | 200 | static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) |
f6d92a05 | 201 | { |
41adf109 | 202 | if (!otg) |
f6d92a05 AKG |
203 | return -ENODEV; |
204 | ||
f6d92a05 | 205 | if (!host) { |
41adf109 | 206 | otg->host = NULL; |
f6d92a05 AKG |
207 | return -ENODEV; |
208 | } | |
209 | ||
41adf109 | 210 | otg->host = host; |
f6d92a05 AKG |
211 | return 0; |
212 | } | |
213 | ||
4525beeb FB |
214 | int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, |
215 | struct usb_phy_generic_platform_data *pdata) | |
f6d92a05 | 216 | { |
af9f51c5 | 217 | enum usb_phy_type type = USB_PHY_TYPE_USB2; |
e9f2cefb | 218 | int err = 0; |
f6d92a05 | 219 | |
af9f51c5 FB |
220 | u32 clk_rate = 0; |
221 | bool needs_vcc = false; | |
222 | ||
af9f51c5 FB |
223 | if (dev->of_node) { |
224 | struct device_node *node = dev->of_node; | |
af9f51c5 FB |
225 | |
226 | if (of_property_read_u32(node, "clock-frequency", &clk_rate)) | |
227 | clk_rate = 0; | |
228 | ||
229 | needs_vcc = of_property_read_bool(node, "vcc-supply"); | |
88167fc0 UKK |
230 | nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset", |
231 | GPIOD_ASIS); | |
9eb07977 | 232 | err = PTR_ERR_OR_ZERO(nop->gpiod_reset); |
7acc9973 | 233 | if (!err) { |
da89dba1 | 234 | nop->gpiod_vbus = devm_gpiod_get_optional(dev, |
88167fc0 UKK |
235 | "vbus-detect", |
236 | GPIOD_ASIS); | |
9eb07977 | 237 | err = PTR_ERR_OR_ZERO(nop->gpiod_vbus); |
7acc9973 | 238 | } |
af9f51c5 FB |
239 | } else if (pdata) { |
240 | type = pdata->type; | |
241 | clk_rate = pdata->clk_rate; | |
242 | needs_vcc = pdata->needs_vcc; | |
7acc9973 | 243 | if (gpio_is_valid(pdata->gpio_reset)) { |
762982db RQ |
244 | err = devm_gpio_request_one(dev, pdata->gpio_reset, |
245 | GPIOF_ACTIVE_LOW, | |
e9f2cefb RJ |
246 | dev_name(dev)); |
247 | if (!err) | |
248 | nop->gpiod_reset = | |
249 | gpio_to_desc(pdata->gpio_reset); | |
250 | } | |
7acc9973 | 251 | nop->gpiod_vbus = pdata->gpiod_vbus; |
e9f2cefb RJ |
252 | } |
253 | ||
254 | if (err == -EPROBE_DEFER) | |
255 | return -EPROBE_DEFER; | |
256 | if (err) { | |
9eb07977 | 257 | dev_err(dev, "Error requesting RESET or VBUS GPIO\n"); |
e9f2cefb | 258 | return err; |
af9f51c5 | 259 | } |
9eb07977 RJ |
260 | if (nop->gpiod_reset) |
261 | gpiod_direction_output(nop->gpiod_reset, 1); | |
af9f51c5 | 262 | |
53b6fc28 SAS |
263 | nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg), |
264 | GFP_KERNEL); | |
e4d7dc66 | 265 | if (!nop->phy.otg) |
41adf109 | 266 | return -ENOMEM; |
41adf109 | 267 | |
53b6fc28 | 268 | nop->clk = devm_clk_get(dev, "main_clk"); |
2319fb88 | 269 | if (IS_ERR(nop->clk)) { |
53b6fc28 | 270 | dev_dbg(dev, "Can't get phy clock: %ld\n", |
2319fb88 RQ |
271 | PTR_ERR(nop->clk)); |
272 | } | |
273 | ||
0eba3879 RQ |
274 | if (!IS_ERR(nop->clk) && clk_rate) { |
275 | err = clk_set_rate(nop->clk, clk_rate); | |
2319fb88 | 276 | if (err) { |
53b6fc28 | 277 | dev_err(dev, "Error setting clock rate\n"); |
2319fb88 RQ |
278 | return err; |
279 | } | |
280 | } | |
281 | ||
53b6fc28 | 282 | nop->vcc = devm_regulator_get(dev, "vcc"); |
58f735fe | 283 | if (IS_ERR(nop->vcc)) { |
53b6fc28 | 284 | dev_dbg(dev, "Error getting vcc regulator: %ld\n", |
58f735fe | 285 | PTR_ERR(nop->vcc)); |
b54b5f56 RQ |
286 | if (needs_vcc) |
287 | return -EPROBE_DEFER; | |
58f735fe RQ |
288 | } |
289 | ||
53b6fc28 | 290 | nop->dev = dev; |
41adf109 HK |
291 | nop->phy.dev = nop->dev; |
292 | nop->phy.label = "nop-xceiv"; | |
293 | nop->phy.set_suspend = nop_set_suspend; | |
90f4232f | 294 | nop->phy.type = type; |
41adf109 | 295 | |
e47d9254 | 296 | nop->phy.otg->state = OTG_STATE_UNDEFINED; |
19c1eac2 | 297 | nop->phy.otg->usb_phy = &nop->phy; |
41adf109 HK |
298 | nop->phy.otg->set_host = nop_set_host; |
299 | nop->phy.otg->set_peripheral = nop_set_peripheral; | |
300 | ||
53b6fc28 SAS |
301 | return 0; |
302 | } | |
303 | EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy); | |
304 | ||
4525beeb | 305 | static int usb_phy_generic_probe(struct platform_device *pdev) |
53b6fc28 SAS |
306 | { |
307 | struct device *dev = &pdev->dev; | |
4525beeb | 308 | struct usb_phy_generic *nop; |
53b6fc28 | 309 | int err; |
bd27fa44 RQ |
310 | |
311 | nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL); | |
312 | if (!nop) | |
313 | return -ENOMEM; | |
314 | ||
af9f51c5 | 315 | err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev)); |
53b6fc28 SAS |
316 | if (err) |
317 | return err; | |
7acc9973 RJ |
318 | if (nop->gpiod_vbus) { |
319 | err = devm_request_threaded_irq(&pdev->dev, | |
320 | gpiod_to_irq(nop->gpiod_vbus), | |
321 | NULL, nop_gpio_vbus_thread, | |
322 | VBUS_IRQ_FLAGS, "vbus_detect", | |
323 | nop); | |
324 | if (err) { | |
325 | dev_err(&pdev->dev, "can't request irq %i, err: %d\n", | |
326 | gpiod_to_irq(nop->gpiod_vbus), err); | |
327 | return err; | |
328 | } | |
329 | } | |
53b6fc28 SAS |
330 | |
331 | nop->phy.init = usb_gen_phy_init; | |
332 | nop->phy.shutdown = usb_gen_phy_shutdown; | |
333 | ||
90f4232f | 334 | err = usb_add_phy_dev(&nop->phy); |
f6d92a05 AKG |
335 | if (err) { |
336 | dev_err(&pdev->dev, "can't register transceiver, err: %d\n", | |
337 | err); | |
4d175f34 | 338 | return err; |
f6d92a05 AKG |
339 | } |
340 | ||
341 | platform_set_drvdata(pdev, nop); | |
342 | ||
343 | return 0; | |
f6d92a05 AKG |
344 | } |
345 | ||
4525beeb | 346 | static int usb_phy_generic_remove(struct platform_device *pdev) |
f6d92a05 | 347 | { |
4525beeb | 348 | struct usb_phy_generic *nop = platform_get_drvdata(pdev); |
f6d92a05 | 349 | |
662dca54 | 350 | usb_remove_phy(&nop->phy); |
f6d92a05 | 351 | |
f6d92a05 AKG |
352 | return 0; |
353 | } | |
354 | ||
0eba3879 RQ |
355 | static const struct of_device_id nop_xceiv_dt_ids[] = { |
356 | { .compatible = "usb-nop-xceiv" }, | |
357 | { } | |
358 | }; | |
359 | ||
360 | MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids); | |
361 | ||
4525beeb FB |
362 | static struct platform_driver usb_phy_generic_driver = { |
363 | .probe = usb_phy_generic_probe, | |
364 | .remove = usb_phy_generic_remove, | |
f6d92a05 | 365 | .driver = { |
4525beeb | 366 | .name = "usb_phy_generic", |
5462b0db | 367 | .of_match_table = nop_xceiv_dt_ids, |
f6d92a05 AKG |
368 | }, |
369 | }; | |
370 | ||
4525beeb | 371 | static int __init usb_phy_generic_init(void) |
f6d92a05 | 372 | { |
4525beeb | 373 | return platform_driver_register(&usb_phy_generic_driver); |
f6d92a05 | 374 | } |
4525beeb | 375 | subsys_initcall(usb_phy_generic_init); |
f6d92a05 | 376 | |
4525beeb | 377 | static void __exit usb_phy_generic_exit(void) |
f6d92a05 | 378 | { |
4525beeb | 379 | platform_driver_unregister(&usb_phy_generic_driver); |
f6d92a05 | 380 | } |
4525beeb | 381 | module_exit(usb_phy_generic_exit); |
f6d92a05 | 382 | |
4525beeb | 383 | MODULE_ALIAS("platform:usb_phy_generic"); |
f6d92a05 AKG |
384 | MODULE_AUTHOR("Texas Instruments Inc"); |
385 | MODULE_DESCRIPTION("NOP USB Transceiver driver"); | |
386 | MODULE_LICENSE("GPL"); |