gdb: Remove a non-const reference parameter

[deliverable/binutils-gdb.git] / gdb / testsuite / gdb.mi / mi-catch-cpp-exceptions.exp

# Copyright 2019 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Test the -catch-throw, -catch-rethrow, and -catch-catch MI commands.

if { [skip_cplus_tests] } { continue }

load_lib mi-support.exp
set MIFLAGS "-i=mi"

standard_testfile .cc

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
    untested "failed to compile"
    return -1
}

# Grab some line numbers we'll need.
set catch_1_lineno [gdb_get_line_number "Catch 1"]
set catch_2_lineno [gdb_get_line_number "Catch 2"]
set throw_1_lineno [gdb_get_line_number "Throw 1"]
set throw_2_lineno [gdb_get_line_number "Throw 2"]
set main_lineno [gdb_get_line_number "Stop here"]

# Restart this test, load the test binary and set a breakpoint in
# main.
proc restart_for_test {} {
    global srcdir subdir binfile srcfile
    global main_lineno

    if {[mi_gdb_start]} {
	continue
    }

    mi_delete_breakpoints
    mi_gdb_reinitialize_dir $srcdir/$subdir
    mi_gdb_load ${binfile}

    mi_runto main

    mi_create_breakpoint \
	"$srcfile:${main_lineno}" "break before exiting program" \
	-disp keep -func "main.*" \
	-file ".*mi-catch-cpp-exceptions.cc" -line ${main_lineno}
}

# Issue an -exec-continue then wait for GDB to catch a C++ exception
# event in FUNC on LINE.  Use TESTNAME to make tests unique.
proc continue_to_next_exception { func line testname } {
    global hex

    mi_send_resuming_command "exec-continue" \
	"exec-continue"
    mi_expect_stop "exception-caught" ".*" ".*" ".*" ".*" \
	{} "run until an exception is caught: $testname"
    mi_gdb_test "-stack-list-frames 1 1" \
	"\\^done,stack=\\\[frame=\{level=\"1\",addr=\"$hex\",func=\"${func}\",.*,line=\"${line}\".*\}\\\]" \
	"check previous frame: $testname"
}

# Issue an -exec-continue and stop at the breakpoint in main.
proc continue_to_breakpoint_in_main {} {
    global main_lineno

    mi_send_resuming_command "exec-continue" "exec-continue to main"
    mi_expect_stop "breakpoint-hit" "main" ".*" ".*" "${main_lineno}" \
	{.* disp="keep"} "run until breakpoint in main"
}

# TYPE is one of throw, rethrow, or catch.  This proc creates a catch
# point using -catch-TYPE.  The optional string EXTRA is any extra
# arguments to pass when setting up the catchpoint.
proc setup_catchpoint {type {extra ""}} {
    global decimal
    mi_gdb_test "-catch-${type} ${extra}" \
	"\\^done,bkpt=\{number=\"$decimal\",type=\"catchpoint\".*what=\"exception ${type}\",catch-type=\"${type}\".*\}" \
	"Setup -catch-${type}"
}

# Ensure that -catch-throw will catch only throws and nothing else.
with_test_prefix "-catch-throw" {
    restart_for_test
    setup_catchpoint "throw"
    continue_to_next_exception "bar" "${throw_1_lineno}" "throw 1"
    continue_to_next_exception "bar" "${throw_1_lineno}" "throw 2"
    continue_to_next_exception "bar" "${throw_1_lineno}" "throw 3"
    continue_to_next_exception "bar" "${throw_1_lineno}" "throw 4"
    continue_to_breakpoint_in_main
}

# Ensure that -catch-rethrow catches only rethrows and nothing else.
with_test_prefix "-catch-rethrow" {
    restart_for_test
    setup_catchpoint "rethrow"
    continue_to_next_exception "foo" "${throw_2_lineno}" "rethrow 1"
    continue_to_next_exception "foo" "${throw_2_lineno}" "rethrow 2"
    continue_to_breakpoint_in_main
}

# Ensure that -catch-catch catches only catch points, and nothing
# else.
with_test_prefix "-catch-catch" {
    restart_for_test
    setup_catchpoint "catch"
    continue_to_next_exception "foo" "${catch_1_lineno}" "catch 1"
    continue_to_next_exception "foo" "${catch_1_lineno}" "catch 2"
    continue_to_next_exception "main" "${catch_2_lineno}" "catch 3"
    continue_to_next_exception "foo" "${catch_1_lineno}" "catch 4"
    continue_to_next_exception "foo" "${catch_1_lineno}" "catch 5"
    continue_to_next_exception "main" "${catch_2_lineno}" "catch 6"
    continue_to_breakpoint_in_main
}

# Now check that all of the command with a regexp that doesn't match,
# don't trigger.
with_test_prefix "all with invalid regexp" {
    restart_for_test
    setup_catchpoint "throw" "-r blahblah"
    setup_catchpoint "rethrow" "-r woofwoof"
    setup_catchpoint "catch" "-r miowmiow"
    continue_to_breakpoint_in_main
}

# Now check that all of the commands with a regexp that does match,
# still trigger.
with_test_prefix "all with valid regexp" {
    restart_for_test
    setup_catchpoint "throw" "-r my_ex"
    setup_catchpoint "rethrow" "-r _except"
    setup_catchpoint "catch" "-r my_exception"
    continue_to_next_exception "bar" "${throw_1_lineno}" "throw 1"
    continue_to_next_exception "foo" "${catch_1_lineno}" "catch 1"
    continue_to_next_exception "bar" "${throw_1_lineno}" "throw 2"
    continue_to_next_exception "foo" "${catch_1_lineno}" "catch 2"
    continue_to_next_exception "foo" "${throw_2_lineno}" "rethrow 1"
    continue_to_next_exception "main" "${catch_2_lineno}" "catch 3"
    continue_to_next_exception "bar" "${throw_1_lineno}" "throw 3"
    continue_to_next_exception "foo" "${catch_1_lineno}" "catch 4"
    continue_to_next_exception "bar" "${throw_1_lineno}" "throw 4"
    continue_to_next_exception "foo" "${catch_1_lineno}" "catch 5"
    continue_to_next_exception "foo" "${throw_2_lineno}" "rethrow 2"
    continue_to_next_exception "main" "${catch_2_lineno}" "catch 6"
    continue_to_breakpoint_in_main
}

# Check that the temporary switch works on its own.
with_test_prefix "all with -t" {
    restart_for_test
    setup_catchpoint "throw" "-t"
    setup_catchpoint "rethrow" "-t"
    setup_catchpoint "catch" "-t"
    continue_to_next_exception "bar" "${throw_1_lineno}" "throw 1"
    continue_to_next_exception "foo" "${catch_1_lineno}" "catch 1"
    continue_to_next_exception "foo" "${throw_2_lineno}" "rethrow 1"
    continue_to_breakpoint_in_main
}

# Check that the temporary switch works when used with a regexp.
restart_for_test
with_test_prefix "all with -t and regexp" {
    setup_catchpoint "throw" "-t -r my_ex"
    setup_catchpoint "rethrow" "-t -r _except"
    setup_catchpoint "catch" "-t -r my_exception"
    continue_to_next_exception "bar" "${throw_1_lineno}" "throw 1"
    continue_to_next_exception "foo" "${catch_1_lineno}" "catch 1"
    continue_to_next_exception "foo" "${throw_2_lineno}" "rethrow 1"
    continue_to_breakpoint_in_main
}