[deliverable/binutils-gdb.git] / include / dis-asm.h

/* Interface between the opcode library and its callers.
   Written by Cygnus Support, 1993.

   The opcode library (libopcodes.a) provides instruction decoders for
   a large variety of instruction sets, callable with an identical
   interface, for making instruction-processing programs more independent
   of the instruction set being processed.  */

#ifndef DIS_ASM_H
#define DIS_ASM_H

#ifdef __cplusplus
extern "C" {
#endif

#include <stdio.h>
#include "bfd.h"

typedef int (*fprintf_ftype) PARAMS((PTR, const char*, ...));

enum dis_insn_type {
  dis_noninsn,			/* Not a valid instruction */
  dis_nonbranch,		/* Not a branch instruction */
  dis_branch,			/* Unconditional branch */
  dis_condbranch,		/* Conditional branch */
  dis_jsr,			/* Jump to subroutine */
  dis_condjsr,			/* Conditional jump to subroutine */
  dis_dref,			/* Data reference instruction */
  dis_dref2			/* Two data references in instruction */
};

/* This struct is passed into the instruction decoding routine, 
   and is passed back out into each callback.  The various fields are used
   for conveying information from your main routine into your callbacks,
   for passing information into the instruction decoders (such as the
   addresses of the callback functions), or for passing information
   back from the instruction decoders to their callers.

   It must be initialized before it is first passed; this can be done
   by hand, or using one of the initialization macros below.  */

typedef struct disassemble_info {
  fprintf_ftype fprintf_func;
  PTR stream;
  PTR application_data;

  /* Target description.  We could replace this with a pointer to the bfd,
     but that would require one.  There currently isn't any such requirement
     so to avoid introducing one we record these explicitly.  */
  /* The bfd_flavour.  This can be bfd_target_unknown_flavour.  */
  enum bfd_flavour flavour;
  /* The bfd_arch value.  */
  enum bfd_architecture arch;
  /* The bfd_mach value.  */
  unsigned long mach;
  /* Endianness (for bi-endian cpus).  Mono-endian cpus can ignore this.  */
  enum bfd_endian endian;

  /* An array of pointers to symbols either at the location being disassembled
     or at the start of the function being disassembled.  The array is sorted
     so that the first symbol is intended to be the one used.  The others are
     present for any misc. purposes.  This is not set reliably, but if it is
     not NULL, it is correct.  */
  asymbol **symbols;
  /* Number of symbols in array.  */
  int num_symbols;

  /* For use by the disassembler.
     The top 16 bits are reserved for public use (and are documented here).
     The bottom 16 bits are for the internal use of the disassembler.  */
  unsigned long flags;
#define INSN_HAS_RELOC	0x80000000
  PTR private_data;

  /* Function used to get bytes to disassemble.  MEMADDR is the
     address of the stuff to be disassembled, MYADDR is the address to
     put the bytes in, and LENGTH is the number of bytes to read.
     INFO is a pointer to this struct.
     Returns an errno value or 0 for success.  */
  int (*read_memory_func)
    PARAMS ((bfd_vma memaddr, bfd_byte *myaddr, int length,
	     struct disassemble_info *info));

  /* Function which should be called if we get an error that we can't
     recover from.  STATUS is the errno value from read_memory_func and
     MEMADDR is the address that we were trying to read.  INFO is a
     pointer to this struct.  */
  void (*memory_error_func)
    PARAMS ((int status, bfd_vma memaddr, struct disassemble_info *info));

  /* Function called to print ADDR.  */
  void (*print_address_func)
    PARAMS ((bfd_vma addr, struct disassemble_info *info));

  /* Function called to determine if there is a symbol at the given ADDR.
     If there is, the function returns 1, otherwise it returns 0.
     This is used by ports which support an overlay manager where
     the overlay number is held in the top part of an address.  In
     some circumstances we want to include the overlay number in the
     address, (normally because there is a symbol associated with
     that address), but sometimes we want to mask out the overlay bits.  */
  int (* symbol_at_address_func)
    PARAMS ((bfd_vma addr, struct disassemble_info * info));

  /* These are for buffer_read_memory.  */
  bfd_byte *buffer;
  bfd_vma buffer_vma;
  int buffer_length;

  /* This variable may be set by the instruction decoder.  It suggests
      the number of bytes objdump should display on a single line.  If
      the instruction decoder sets this, it should always set it to
      the same value in order to get reasonable looking output.  */
  int bytes_per_line;

  /* the next two variables control the way objdump displays the raw data */
  /* For example, if bytes_per_line is 8 and bytes_per_chunk is 4, the */
  /* output will look like this:
     00:   00000000 00000000
     with the chunks displayed according to "display_endian". */
  int bytes_per_chunk;
  enum bfd_endian display_endian;

  /* Results from instruction decoders.  Not all decoders yet support
     this information.  This info is set each time an instruction is
     decoded, and is only valid for the last such instruction.

     To determine whether this decoder supports this information, set
     insn_info_valid to 0, decode an instruction, then check it.  */

  char insn_info_valid;		/* Branch info has been set. */
  char branch_delay_insns;	/* How many sequential insn's will run before
				   a branch takes effect.  (0 = normal) */
  char data_size;		/* Size of data reference in insn, in bytes */
  enum dis_insn_type insn_type;	/* Type of instruction */
  bfd_vma target;		/* Target address of branch or dref, if known;
				   zero if unknown.  */
  bfd_vma target2;		/* Second target address for dref2 */

  /* Command line options specific to the target disassembler.  */
  char * disassembler_options;

} disassemble_info;

\f
/* Standard disassemblers.  Disassemble one instruction at the given
   target address.  Return number of bytes processed.  */
typedef int (*disassembler_ftype)
     PARAMS((bfd_vma, disassemble_info *));

extern int print_insn_big_mips		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_little_mips	PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_i386_att		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_i386_intel	PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_m68k		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_z8001		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_z8002		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_h8300		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_h8300h		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_h8300s		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_h8500		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_alpha		PARAMS ((bfd_vma, disassemble_info*));
extern disassembler_ftype arc_get_disassembler PARAMS ((int, int));
extern int print_insn_big_arm		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_little_arm	PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_sparc		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_big_a29k		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_little_a29k	PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_i960		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_sh		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_shl		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_hppa		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_fr30		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_m32r		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_m88k		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_mcore		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_mn10200		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_mn10300		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_ns32k		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_big_powerpc	PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_little_powerpc	PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_rs6000		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_w65		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_d10v		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_d30v		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_v850		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_tic30		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_vax		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_tic80		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_pj		PARAMS ((bfd_vma, disassemble_info*));

extern int arm_toggle_regnames          PARAMS ((void));

/* Fetch the disassembler for a given BFD, if that support is available.  */
extern disassembler_ftype disassembler	PARAMS ((bfd *));

\f
/* This block of definitions is for particular callers who read instructions
   into a buffer before calling the instruction decoder.  */

/* Here is a function which callers may wish to use for read_memory_func.
   It gets bytes from a buffer.  */
extern int buffer_read_memory
  PARAMS ((bfd_vma, bfd_byte *, int, struct disassemble_info *));

/* This function goes with buffer_read_memory.
   It prints a message using info->fprintf_func and info->stream.  */
extern void perror_memory PARAMS ((int, bfd_vma, struct disassemble_info *));


/* Just print the address in hex.  This is included for completeness even
   though both GDB and objdump provide their own (to print symbolic
   addresses).  */
extern void generic_print_address
  PARAMS ((bfd_vma, struct disassemble_info *));

/* Always true.  */
extern int generic_symbol_at_address
  PARAMS ((bfd_vma, struct disassemble_info *));

/* Macro to initialize a disassemble_info struct.  This should be called
   by all applications creating such a struct.  */
#define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \
  (INFO).flavour = bfd_target_unknown_flavour, \
  (INFO).arch = bfd_arch_unknown, \
  (INFO).mach = 0, \
  (INFO).endian = BFD_ENDIAN_UNKNOWN, \
  INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC)

/* Call this macro to initialize only the internal variables for the
   disassembler.  Architecture dependent things such as byte order, or machine
   variant are not touched by this macro.  This makes things much easier for
   GDB which must initialize these things seperatly.  */

#define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \
  (INFO).fprintf_func = (fprintf_ftype)(FPRINTF_FUNC), \
  (INFO).stream = (PTR)(STREAM), \
  (INFO).symbols = NULL, \
  (INFO).num_symbols = 0, \
  (INFO).buffer = NULL, \
  (INFO).buffer_vma = 0, \
  (INFO).buffer_length = 0, \
  (INFO).read_memory_func = buffer_read_memory, \
  (INFO).memory_error_func = perror_memory, \
  (INFO).print_address_func = generic_print_address, \
  (INFO).symbol_at_address_func = generic_symbol_at_address, \
  (INFO).flags = 0, \
  (INFO).bytes_per_line = 0, \
  (INFO).bytes_per_chunk = 0, \
  (INFO).display_endian = BFD_ENDIAN_UNKNOWN, \
  (INFO).insn_info_valid = 0

#ifdef __cplusplus
};
#endif

#endif /* ! defined (DIS_ASM_H) */
Commit	Line	Data
252b5132 RH	1	/* Interface between the opcode library and its callers.
	2	Written by Cygnus Support, 1993.
	3
	4	The opcode library (libopcodes.a) provides instruction decoders for
	5	a large variety of instruction sets, callable with an identical
	6	interface, for making instruction-processing programs more independent
	7	of the instruction set being processed. */
	8
	9	#ifndef DIS_ASM_H
	10	#define DIS_ASM_H
	11
7d7a6736 ILT	12	#ifdef __cplusplus
	13	extern "C" {
	14	#endif
	15
252b5132 RH	16	#include <stdio.h>
	17	#include "bfd.h"
	18
	19	typedef int (fprintf_ftype) PARAMS((PTR, const char, ...));
	20
	21	enum dis_insn_type {
	22	dis_noninsn, /* Not a valid instruction */
	23	dis_nonbranch, /* Not a branch instruction */
	24	dis_branch, /* Unconditional branch */
	25	dis_condbranch, /* Conditional branch */
	26	dis_jsr, /* Jump to subroutine */
	27	dis_condjsr, /* Conditional jump to subroutine */
	28	dis_dref, /* Data reference instruction */
	29	dis_dref2 /* Two data references in instruction */
	30	};
	31
	32	/* This struct is passed into the instruction decoding routine,
	33	and is passed back out into each callback. The various fields are used
	34	for conveying information from your main routine into your callbacks,
	35	for passing information into the instruction decoders (such as the
	36	addresses of the callback functions), or for passing information
	37	back from the instruction decoders to their callers.
	38
	39	It must be initialized before it is first passed; this can be done
	40	by hand, or using one of the initialization macros below. */
	41
	42	typedef struct disassemble_info {
	43	fprintf_ftype fprintf_func;
	44	PTR stream;
	45	PTR application_data;
	46
	47	/* Target description. We could replace this with a pointer to the bfd,
	48	but that would require one. There currently isn't any such requirement
	49	so to avoid introducing one we record these explicitly. */
	50	/* The bfd_flavour. This can be bfd_target_unknown_flavour. */
	51	enum bfd_flavour flavour;
	52	/* The bfd_arch value. */
	53	enum bfd_architecture arch;
	54	/* The bfd_mach value. */
	55	unsigned long mach;
	56	/* Endianness (for bi-endian cpus). Mono-endian cpus can ignore this. */
	57	enum bfd_endian endian;
	58
	59	/* An array of pointers to symbols either at the location being disassembled
	60	or at the start of the function being disassembled. The array is sorted
	61	so that the first symbol is intended to be the one used. The others are
	62	present for any misc. purposes. This is not set reliably, but if it is
	63	not NULL, it is correct. */
	64	asymbol **symbols;
	65	/* Number of symbols in array. */
	66	int num_symbols;
	67
	68	/* For use by the disassembler.
	69	The top 16 bits are reserved for public use (and are documented here).
	70	The bottom 16 bits are for the internal use of the disassembler. */
	71	unsigned long flags;
	72	#define INSN_HAS_RELOC 0x80000000
	73	PTR private_data;
	74
	75	/* Function used to get bytes to disassemble. MEMADDR is the
	76	address of the stuff to be disassembled, MYADDR is the address to
	77	put the bytes in, and LENGTH is the number of bytes to read.
	78	INFO is a pointer to this struct.
	79	Returns an errno value or 0 for success. */
80	int (*read_memory_func)
81	PARAMS ((bfd_vma memaddr, bfd_byte *myaddr, int length,
82	struct disassemble_info *info));
83
84	/* Function which should be called if we get an error that we can't
85	recover from. STATUS is the errno value from read_memory_func and
86	MEMADDR is the address that we were trying to read. INFO is a
87	pointer to this struct. */
88	void (*memory_error_func)
89	PARAMS ((int status, bfd_vma memaddr, struct disassemble_info *info));
90
91	/* Function called to print ADDR. */
92	void (*print_address_func)
93	PARAMS ((bfd_vma addr, struct disassemble_info *info));
94
95	/* Function called to determine if there is a symbol at the given ADDR.
96	If there is, the function returns 1, otherwise it returns 0.
97	This is used by ports which support an overlay manager where
98	the overlay number is held in the top part of an address. In
99	some circumstances we want to include the overlay number in the
100	address, (normally because there is a symbol associated with
101	that address), but sometimes we want to mask out the overlay bits. */
102	int (* symbol_at_address_func)
103	PARAMS ((bfd_vma addr, struct disassemble_info * info));
104
105	/* These are for buffer_read_memory. */
106	bfd_byte *buffer;
107	bfd_vma buffer_vma;
108	int buffer_length;
109
110	/* This variable may be set by the instruction decoder. It suggests
111	the number of bytes objdump should display on a single line. If
112	the instruction decoder sets this, it should always set it to
113	the same value in order to get reasonable looking output. */
114	int bytes_per_line;
115
116	/* the next two variables control the way objdump displays the raw data */
117	/* For example, if bytes_per_line is 8 and bytes_per_chunk is 4, the */
118	/* output will look like this:
119	00: 00000000 00000000
120	with the chunks displayed according to "display_endian". */
121	int bytes_per_chunk;
122	enum bfd_endian display_endian;
123
124	/* Results from instruction decoders. Not all decoders yet support
125	this information. This info is set each time an instruction is
126	decoded, and is only valid for the last such instruction.
127
128	To determine whether this decoder supports this information, set
129	insn_info_valid to 0, decode an instruction, then check it. */
130
131	char insn_info_valid; /* Branch info has been set. */
132	char branch_delay_insns; /* How many sequential insn's will run before
133	a branch takes effect. (0 = normal) */
134	char data_size; /* Size of data reference in insn, in bytes */
135	enum dis_insn_type insn_type; /* Type of instruction */
136	bfd_vma target; /* Target address of branch or dref, if known;
137	zero if unknown. */
138	bfd_vma target2; /* Second target address for dref2 */
139
dd92f639 NC	140	/* Command line options specific to the target disassembler. */
	141	char * disassembler_options;
	142
252b5132 RH	143	} disassemble_info;
	144
	145	\f
	146	/* Standard disassemblers. Disassemble one instruction at the given
	147	target address. Return number of bytes processed. */
	148	typedef int (*disassembler_ftype)
	149	PARAMS((bfd_vma, disassemble_info *));
	150
	151	extern int print_insn_big_mips PARAMS ((bfd_vma, disassemble_info*));
	152	extern int print_insn_little_mips PARAMS ((bfd_vma, disassemble_info*));
	153	extern int print_insn_i386_att PARAMS ((bfd_vma, disassemble_info*));
	154	extern int print_insn_i386_intel PARAMS ((bfd_vma, disassemble_info*));
	155	extern int print_insn_m68k PARAMS ((bfd_vma, disassemble_info*));
	156	extern int print_insn_z8001 PARAMS ((bfd_vma, disassemble_info*));
	157	extern int print_insn_z8002 PARAMS ((bfd_vma, disassemble_info*));
	158	extern int print_insn_h8300 PARAMS ((bfd_vma, disassemble_info*));
	159	extern int print_insn_h8300h PARAMS ((bfd_vma, disassemble_info*));
	160	extern int print_insn_h8300s PARAMS ((bfd_vma, disassemble_info*));
	161	extern int print_insn_h8500 PARAMS ((bfd_vma, disassemble_info*));
	162	extern int print_insn_alpha PARAMS ((bfd_vma, disassemble_info*));
	163	extern disassembler_ftype arc_get_disassembler PARAMS ((int, int));
	164	extern int print_insn_big_arm PARAMS ((bfd_vma, disassemble_info*));
	165	extern int print_insn_little_arm PARAMS ((bfd_vma, disassemble_info*));
	166	extern int print_insn_sparc PARAMS ((bfd_vma, disassemble_info*));
	167	extern int print_insn_big_a29k PARAMS ((bfd_vma, disassemble_info*));
	168	extern int print_insn_little_a29k PARAMS ((bfd_vma, disassemble_info*));
	169	extern int print_insn_i960 PARAMS ((bfd_vma, disassemble_info*));
	170	extern int print_insn_sh PARAMS ((bfd_vma, disassemble_info*));
	171	extern int print_insn_shl PARAMS ((bfd_vma, disassemble_info*));
	172	extern int print_insn_hppa PARAMS ((bfd_vma, disassemble_info*));
	173	extern int print_insn_fr30 PARAMS ((bfd_vma, disassemble_info*));
	174	extern int print_insn_m32r PARAMS ((bfd_vma, disassemble_info*));
	175	extern int print_insn_m88k PARAMS ((bfd_vma, disassemble_info*));
	176	extern int print_insn_mcore PARAMS ((bfd_vma, disassemble_info*));
	177	extern int print_insn_mn10200 PARAMS ((bfd_vma, disassemble_info*));
	178	extern int print_insn_mn10300 PARAMS ((bfd_vma, disassemble_info*));
	179	extern int print_insn_ns32k PARAMS ((bfd_vma, disassemble_info*));
	180	extern int print_insn_big_powerpc PARAMS ((bfd_vma, disassemble_info*));
	181	extern int print_insn_little_powerpc PARAMS ((bfd_vma, disassemble_info*));
	182	extern int print_insn_rs6000 PARAMS ((bfd_vma, disassemble_info*));
	183	extern int print_insn_w65 PARAMS ((bfd_vma, disassemble_info*));
	184	extern int print_insn_d10v PARAMS ((bfd_vma, disassemble_info*));
	185	extern int print_insn_d30v PARAMS ((bfd_vma, disassemble_info*));
	186	extern int print_insn_v850 PARAMS ((bfd_vma, disassemble_info*));
	187	extern int print_insn_tic30 PARAMS ((bfd_vma, disassemble_info*));
	188	extern int print_insn_vax PARAMS ((bfd_vma, disassemble_info*));
	189	extern int print_insn_tic80 PARAMS ((bfd_vma, disassemble_info*));
5bb59d65	190	extern int print_insn_pj PARAMS ((bfd_vma, disassemble_info*));
252b5132	191
dd92f639 NC	192	extern int arm_toggle_regnames PARAMS ((void));
dd92f639 NC	193
252b5132 RH	194	/* Fetch the disassembler for a given BFD, if that support is available. */
	195	extern disassembler_ftype disassembler PARAMS ((bfd *));
	196
	197	\f
	198	/* This block of definitions is for particular callers who read instructions
	199	into a buffer before calling the instruction decoder. */
	200
	201	/* Here is a function which callers may wish to use for read_memory_func.
	202	It gets bytes from a buffer. */
	203	extern int buffer_read_memory
	204	PARAMS ((bfd_vma, bfd_byte , int, struct disassemble_info ));
	205
	206	/* This function goes with buffer_read_memory.
	207	It prints a message using info->fprintf_func and info->stream. */
	208	extern void perror_memory PARAMS ((int, bfd_vma, struct disassemble_info *));
	209
	210
	211	/* Just print the address in hex. This is included for completeness even
	212	though both GDB and objdump provide their own (to print symbolic
	213	addresses). */
	214	extern void generic_print_address
	215	PARAMS ((bfd_vma, struct disassemble_info *));
	216
	217	/* Always true. */
	218	extern int generic_symbol_at_address
	219	PARAMS ((bfd_vma, struct disassemble_info *));
	220
	221	/* Macro to initialize a disassemble_info struct. This should be called
	222	by all applications creating such a struct. */
	223	#define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \
	224	(INFO).flavour = bfd_target_unknown_flavour, \
	225	(INFO).arch = bfd_arch_unknown, \
	226	(INFO).mach = 0, \
	227	(INFO).endian = BFD_ENDIAN_UNKNOWN, \
	228	INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC)
	229
	230	/* Call this macro to initialize only the internal variables for the
	231	disassembler. Architecture dependent things such as byte order, or machine
	232	variant are not touched by this macro. This makes things much easier for
	233	GDB which must initialize these things seperatly. */
	234
	235	#define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \
	236	(INFO).fprintf_func = (fprintf_ftype)(FPRINTF_FUNC), \
	237	(INFO).stream = (PTR)(STREAM), \
	238	(INFO).symbols = NULL, \
	239	(INFO).num_symbols = 0, \
	240	(INFO).buffer = NULL, \
	241	(INFO).buffer_vma = 0, \
	242	(INFO).buffer_length = 0, \
	243	(INFO).read_memory_func = buffer_read_memory, \
	244	(INFO).memory_error_func = perror_memory, \
	245	(INFO).print_address_func = generic_print_address, \
	246	(INFO).symbol_at_address_func = generic_symbol_at_address, \
	247	(INFO).flags = 0, \
	248	(INFO).bytes_per_line = 0, \
	249	(INFO).bytes_per_chunk = 0, \
	250	(INFO).display_endian = BFD_ENDIAN_UNKNOWN, \
	251	(INFO).insn_info_valid = 0
	252
7d7a6736 ILT	253	#ifdef __cplusplus
	254	};
	255	#endif
	256
252b5132	257	#endif /* ! defined (DIS_ASM_H) */