[deliverable/binutils-gdb.git] / opcodes / ChangeLog

2008-05-21  M R Swami Reddy <MR.Swami.Reddy@nsc.com>

	* cr16-dis.c (build_mask): Adjust the mask for 32-bit bcond.

2008-05-14  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.

2008-05-02  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (MOVBE_Fixup): New.
	(Mo): Likewise.
	(PREFIX_0F3880): Likewise.
	(PREFIX_0F3881): Likewise.
	(PREFIX_0F38F0): Updated.
	(prefix_table): Add PREFIX_0F3880 and PREFIX_0F3881.  Update
	PREFIX_0F38F0 and PREFIX_0F38F1 for movbe.
	(three_byte_table): Use PREFIX_0F3880 and PREFIX_0F3881.

	* i386-gen.c (cpu_flag_init): Add CPU_MOVBE_FLAGS and
	CPU_EPT_FLAGS.
	(cpu_flags): Add CpuMovbe and CpuEPT.

	* i386-opc.h (CpuMovbe): New.
	(CpuEPT): Likewise.
	(CpuLM): Updated.
	(i386_cpu_flags): Add cpumovbe and cpuept.

	* i386-opc.tbl: Add entries for movbe and EPT instructions.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2008-04-29  Adam Nemet  <anemet@caviumnetworks.com>

	* mips-opc.c (mips_builtin_opcodes): Set field `match' to 0 for
	the two drem and the two dremu macros.

2008-04-28  Adam Nemet  <anemet@caviumnetworks.com>

	* mips-opc.c (mips_builtin_opcodes): Mark prefx and c1
	instructions FP_S.  Mark l.s, li.s, lwc1, swc1, s.s, trunc.w.s and
	cop1 macros INSN2_M_FP_S.  Mark l.d, li.d, ldc1 and sdc1 macros
	INSN2_M_FP_D.  Mark trunc.w.d macro INSN2_M_FP_S and INSN2_M_FP_D.

2008-04-25  David S. Miller  <davem@davemloft.net>

	* sparc-dis.c: Emit %stick instead of %sys_tick, and %stick_cmpr
	instead of %sys_tick_cmpr, as suggested in architecture manuals.

2008-04-23  Paolo Bonzini  <bonzini@gnu.org>

	* aclocal.m4: Regenerate.
	* configure: Regenerate.

2008-04-23  David S. Miller  <davem@davemloft.net>

	* sparc-opc.c (asi_table): Add UltraSPARC and Niagara
	extended values.
	(prefetch_table): Add missing values.

2008-04-22  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (opcode_modifiers): Add NoAVX.

	* i386-opc.h (NoAVX): New.
	(OldGcc): Updated.
	(i386_opcode_modifier): Add noavx.

	* i386-opc.tbl: Add NoAVX to SSE, SSE2, SSE3 and SSSE3
	instructions which don't have AVX equivalent.
	* i386-tbl.h: Regenerated.

2008-04-18  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (OP_VEX_FMA): New.
	(OP_EX_VexImmW): Likewise.
	(VexFMA): Likewise.
	(Vex128FMA): Likewise.
	(EXVexImmW): Likewise.
	(get_vex_imm8): Likewise.
	(OP_EX_VexReg): Likewise.
	(vex_i4_done): Renamed to ...
	(vex_w_done): This.
	(prefix_table): Replace EXVexW with EXVexImmW on vpermil2ps
	and vpermil2pd.  Replace Vex/Vex128 with VexFMA/Vex128FMA on
	FMA instructions.
	(print_insn): Updated.
	(OP_EX_VexW): Rewrite to swap register in VEX with EX.
	(OP_REG_VexI4): Check invalid high registers.

2008-04-16  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
	    Michael Meissner  <michael.meissner@amd.com>

	* i386-opc.tbl: Fix protX to allow memory in the middle operand.
	* i386-tbl.h: Regenerate from i386-opc.tbl.

2008-04-14  Edmar Wienskoski  <edmar@freescale.com>

	* ppc-dis.c (powerpc_dialect): Handle "e500mc".  Extend "e500" to
	accept Power E500MC instructions.
	(print_ppc_disassembler_options): Document -Me500mc.
	* ppc-opc.c (DUIS, DUI, T): New.
	(XRT, XRTRA): Likewise.
	(E500MC): Likewise.
	(powerpc_opcodes): Add new Power E500MC instructions.

2008-04-10  Andreas Krebbel  <krebbel1@de.ibm.com>

	* s390-dis.c (init_disasm): Evaluate disassembler_options.
	(print_s390_disassembler_options): New function.
	* disassemble.c (disassembler_usage): Invoke
	print_s390_disassembler_options.

2008-04-10  Andreas Krebbel  <krebbel1@de.ibm.com>

	* s390-mkopc.c (insertExpandedMnemonic): Expand string sizes
	of local variables used for mnemonic parsing: prefix, suffix and
	number.

2008-04-10  Andreas Krebbel  <krebbel1@de.ibm.com>

	* s390-mkopc.c (s390_cond_ext_format): Add back the mnemonic
	extensions for conditional jumps (o, p, m, nz, z, nm, np, no).
	(s390_crb_extensions): New extensions table.
	(insertExpandedMnemonic): Handle '$' tag.
	* s390-opc.txt: Remove conditional jump variants which can now
	be expanded automatically.
	Replace '*' tag with '$' in the compare and branch instructions.

2008-04-07  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (PREFIX_VEX_38XX): Add a tab.
	(PREFIX_VEX_3AXX): Likewis.

2008-04-07  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Remove 4 extra blank lines.

2008-04-04  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Replace CPU_CLMUL_FLAGS/CpuCLMUL
	with CPU_PCLMUL_FLAGS/CpuPCLMUL.
	(cpu_flags): Replace CpuCLMUL with CpuPCLMUL.
	* i386-opc.tbl: Likewise.

	* i386-opc.h (CpuCLMUL): Renamed to ...
	(CpuPCLMUL): This.
	(CpuFMA): Updated.
	(i386_cpu_flags): Replace cpuclmul with cpupclmul.

	* i386-init.h: Regenerated.

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (OP_E_register): New.
	(OP_E_memory): Likewise.
	(OP_VEX): Likewise.
	(OP_EX_Vex): Likewise.
	(OP_EX_VexW): Likewise.
	(OP_XMM_Vex): Likewise.
	(OP_XMM_VexW): Likewise.
	(OP_REG_VexI4): Likewise.
	(PCLMUL_Fixup): Likewise.
	(VEXI4_Fixup): Likewise.
	(VZERO_Fixup): Likewise.
	(VCMP_Fixup): Likewise.
	(VPERMIL2_Fixup): Likewise.
	(rex_original): Likewise.
	(rex_ignored): Likewise.
	(Mxmm): Likewise.
	(XMM): Likewise.
	(EXxmm): Likewise.
	(EXxmmq): Likewise.
	(EXymmq): Likewise.
	(Vex): Likewise.
	(Vex128): Likewise.
	(Vex256): Likewise.
	(VexI4): Likewise.
	(EXdVex): Likewise.
	(EXqVex): Likewise.
	(EXVexW): Likewise.
	(EXdVexW): Likewise.
	(EXqVexW): Likewise.
	(XMVex): Likewise.
	(XMVexW): Likewise.
	(XMVexI4): Likewise.
	(PCLMUL): Likewise.
	(VZERO): Likewise.
	(VCMP): Likewise.
	(VPERMIL2): Likewise.
	(xmm_mode): Likewise.
	(xmmq_mode): Likewise.
	(ymmq_mode): Likewise.
	(vex_mode): Likewise.
	(vex128_mode): Likewise.
	(vex256_mode): Likewise.
	(USE_VEX_C4_TABLE): Likewise.
	(USE_VEX_C5_TABLE): Likewise.
	(USE_VEX_LEN_TABLE): Likewise.
	(VEX_C4_TABLE): Likewise.
	(VEX_C5_TABLE): Likewise.
	(VEX_LEN_TABLE): Likewise.
	(REG_VEX_XX): Likewise.
	(MOD_VEX_XXX): Likewise.
	(PREFIX_0F38DB..PREFIX_0F38DF): Likewise.
	(PREFIX_0F3A44): Likewise.
	(PREFIX_0F3ADF): Likewise.
	(PREFIX_VEX_XXX): Likewise.
	(VEX_OF): Likewise.
	(VEX_OF38): Likewise.
	(VEX_OF3A): Likewise.
	(VEX_LEN_XXX): Likewise.
	(vex): Likewise.
	(need_vex): Likewise.
	(need_vex_reg): Likewise.
	(vex_i4_done): Likewise.
	(vex_table): Likewise.
	(vex_len_table): Likewise.
	(OP_REG_VexI4): Likewise.
	(vex_cmp_op): Likewise.
	(pclmul_op): Likewise.
	(vpermil2_op): Likewise.
	(m_mode): Updated.
	(es_reg): Likewise.
	(PREFIX_0F38F0): Likewise.
	(PREFIX_0F3A60): Likewise.
	(reg_table): Add REG_VEX_71...REG_VEX_73 and REG_VEX_AE.
	(prefix_table): Add PREFIX_0F38DB..PREFIX_0F38DF, PREFIX_0F3ADF
	and PREFIX_VEX_XXX entries.
	(x86_64_table): Use VEX_C4_TABLE and VEX_C5_TABLE.
	(three_byte_table): Use PREFIX_0F38DB..PREFIX_0F38DF and
	PREFIX_0F3ADF.
	(mod_table): Use VEX_C4_TABLE, VEX_C5_TABLE and VEX_LEN_TABLE.
	Add MOD_VEX_XXX entries.
	(ckprefix): Initialize rex_original and rex_ignored.  Store the
	REX byte in rex_original.
	(get_valid_dis386): Handle the implicit prefix in VEX prefix
	bytes and USE_VEX_LEN_TABLE/USE_VEX_C4_TABLE/USE_VEX_C5_TABLE.
	(print_insn): Set need_vex/need_vex_reg/vex_i4_done to 0 before
	calling get_valid_dis386.  Use rex_original and rex_ignored when
	printing out REX.
	(putop): Handle "XY".
	(intel_operand_size): Handle VEX, xmm_mode, xmmq_mode and
	ymmq_mode.
	(OP_E_extended): Updated to use OP_E_register and
	OP_E_memory.
	(OP_XMM): Handle VEX.
	(OP_EX): Likewise.
	(XMM_Fixup): Likewise.
	(CMP_Fixup): Use ARRAY_SIZE.

	* i386-gen.c (cpu_flag_init): Add CpuAES, CPU_CLMUL_FLAGS,
	CPU_FMA_FLAGS and CPU_AVX_FLAGS.
	(operand_type_init): Add OPERAND_TYPE_REGYMM and
	OPERAND_TYPE_VEX_IMM4.
	(cpu_flags): Add CpuAVX, CpuAES, CpuCLMUL and CpuFMA.
	(opcode_modifiers): Add Implicit1stXmm0, Vex, Vex256, VexNDD,
	VexNDS, VexW0, VexW1, Vex0F, Vex0F38, Vex0F3A, Vex3Sources,
	VexImmExt and SSE2AVX.
	(operand_types): Add RegYMM, Ymmword and Vex_Imm4.

	* i386-opc.h (CpuAVX): New.
	(CpuAES): Likewise.
	(CpuCLMUL): Likewise.
	(CpuFMA): Likewise.
	(Vex): Likewise.
	(Vex256): Likewise.
	(VexNDS): Likewise.
	(VexNDD): Likewise.
	(VexW0): Likewise.
	(VexW1): Likewise.
	(Vex0F): Likewise.
	(Vex0F38): Likewise.
	(Vex0F3A): Likewise.
	(Vex3Sources): Likewise.
	(VexImmExt): Likewise.
	(SSE2AVX): Likewise.
	(RegYMM): Likewise.
	(Ymmword): Likewise.
	(Vex_Imm4): Likewise.
	(Implicit1stXmm0): Likewise.
	(CpuXsave): Updated.
	(CpuLM): Likewise.
	(ByteOkIntel): Likewise.
	(OldGcc): Likewise.
	(Control): Likewise.
	(Unspecified): Likewise.
	(OTMax): Likewise.
	(i386_cpu_flags): Add cpuavx, cpuaes, cpuclmul and cpufma.
	(i386_opcode_modifier): Add implicit1stxmm0, vex, vex256,
	vexnds, vexndd, vexw0, vexw1, vex0f, vex0f38, vex0f3a,
	vex3sources, veximmext and sse2avx.
	(i386_operand_type): Add regymm, ymmword and vex_imm4.

	* i386-opc.tbl: Add AES, CLMUL, AVX and FMA new instructions.

	* i386-reg.tbl: Add AVX registers, ymm0..ymm15.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2008-03-26  Bernd Schmidt  <bernd.schmidt@analog.com>

	From  Robin Getz  <robin.getz@analog.com>
	* bfin-dis.c (bu32): Typedef.
	(enum const_forms_t): Add c_uimm32 and c_huimm32.
	(constant_formats[]): Add uimm32 and huimm16.
	(fmtconst_val): New.
	(uimm32): Define.
	(huimm32): Define.
	(imm16_val): Define.
	(luimm16_val): Define.
	(struct saved_state): Define.
	(GREG, DPREG, DREG, PREG, SPREG, FPREG, IREG, MREG, BREG, LREG,
	A0XREG, A0WREG, A1XREG, A1WREG,CCREG, LC0REG, LT0REG, LB0REG,
	LC1REG, LT1REG, LB1REG, RETSREG, PCREG): Define.
	(get_allreg): New.
	(decode_LDIMMhalf_0): Print out the whole register value.

	From Jie Zhang  <jie.zhang@analog.com>
	* bfin-dis.c (decode_dsp32mac_0): Decode (IU) option for
	multiply and multiply-accumulate to data register instruction.

	* bfin-dis.c: (c_uimm4s4d, c_imm5d, c_imm7d, c_imm16d, c_uimm16s4d,
	c_imm32, c_huimm32e): Define.
	(constant_formats): Add flags for printing decimal, leading spaces, and
	exact symbols.
	(comment, parallel): Add global flags in all disassembly.
	(fmtconst): Take advantage of new flags, and print default in hex.
	(fmtconst_val): Likewise.
	(decode_macfunc): Be consistant with spaces, tabs, comments,
	capitalization in disassembly, fix minor coding style issues.
	(reg_names, amod0, amod1, amod0amod2, aligndir, get_allreg): Likewise.
	(decode_ProgCtrl_0, decode_PushPopMultiple_0, decode_CCflag_0,
	decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0,
	decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0, decode_LOGI2op_0,
	decode_COMP3op_0, decode_COMPI2opD_0, decode_COMPI2opP_0,
	decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0,
	decode_dspLDST_0, decode_LDST_0, decode_LDSTiiFP_0, decode_LDSTii_0,
	decode_LoopSetup_0, decode_LDIMMhalf_0, decode_CALLa_0,
	decode_LDSTidxI_0, decode_linkage_0, decode_dsp32alu_0,
	decode_dsp32shift_0, decode_dsp32shiftimm_0, decode_pseudodbg_assert_0,
	_print_insn_bfin, print_insn_bfin): Likewise.

2008-03-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	* aclocal.m4: Regenerate.
	* configure: Likewise.
	* Makefile.in: Likewise.

2008-03-13  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.
	* configure: Regenerate.

2008-03-07  Alan Modra  <amodra@bigpond.net.au>

	* ppc-opc.c (powerpc_opcodes): Order and format.

2008-03-01  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Allow 16-bit near indirect branches for x86-64.
	* i386-tbl.h: Regenerated.

2008-02-23  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Disallow 16-bit near indirect branches for
	x86-64.
	* i386-tbl.h: Regenerated.

2008-02-21  Jan Beulich  <jbeulich@novell.com>

	* i386-opc.tbl: Allow Dword for far indirect call. Allow Dword
	and Fword for far indirect jmp. Allow Reg16 and Word for near
	indirect jmp on x86-64. Disallow Fword for lcall.
	* i386-tbl.h: Re-generate.

2008-02-18  M R Swami Reddy <MR.Swami.Reddy@nsc.com>

	* cr16-opc.c  (cr16_num_optab): Defined

2008-02-16  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c  (operand_type_init): Add OPERAND_TYPE_INOUTPORTREG.
	* i386-init.h: Regenerated.

2008-02-14  Nick Clifton  <nickc@redhat.com>

	PR binutils/5524
	* configure.in (SHARED_LIBADD): Select the correct host specific
	file extension for shared libraries.
	* configure: Regenerate.

2008-02-13  Jan Beulich  <jbeulich@novell.com>

	* i386-opc.h (RegFlat): New.
	* i386-reg.tbl (flat): Add.
	* i386-tbl.h: Re-generate.

2008-02-13  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (a_mode): New.
	(cond_jump_mode): Adjust.
	(Ma): Change to a_mode.
	(intel_operand_size): Handle a_mode.
	* i386-opc.tbl: Allow Dword and Qword for bound.
	* i386-tbl.h: Re-generate.

2008-02-13  Jan Beulich  <jbeulich@novell.com>

	* i386-gen.c (process_i386_registers): Process new fields.
	* i386-opc.h (reg_entry): Shrink reg_flags and reg_num to
	unsigned char. Add dw2_regnum and Dw2Inval.
	* i386-reg.tbl: Provide initializers for dw2_regnum. Add pseudo
	register names.
	* i386-tbl.h: Re-generate.

2008-02-11  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Add CPU_XSAVE_FLAGS.
	* i386-init.h: Updated.

2008-02-11  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flags): Add CpuXsave.

	* i386-opc.h (CpuXsave): New.
	(CpuLM): Updated.
	(i386_cpu_flags): Add cpuxsave.

	* i386-dis.c (MOD_0FAE_REG_4): New.
	(RM_0F01_REG_2): Likewise.
	(MOD_0FAE_REG_5): Updated.
	(RM_0F01_REG_3): Likewise.
	(reg_table): Use MOD_0FAE_REG_4.
	(mod_table): Use RM_0F01_REG_2.  Add MOD_0FAE_REG_4.  Updated
	for xrstor.
	(rm_table): Add RM_0F01_REG_2.

	* i386-opc.tbl: Add xsave, xrstor, xgetbv and xsetbv.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2008-02-11  Jan Beulich  <jbeulich@novell.com>

	* i386-opc.tbl: Remove Disp32S from CpuNo64 opcodes. Remove
	Disp16 from Cpu64 non-jump opcodes (including loop and j?cxz).
	* i386-tbl.h: Re-generate.

2008-02-04  H.J. Lu  <hongjiu.lu@intel.com>

	PR 5715
	* configure: Regenerated.

2008-02-04  Adam Nemet  <anemet@caviumnetworks.com>

	* mips-dis.c: Update copyright.
	(mips_arch_choices): Add Octeon.
	* mips-opc.c: Update copyright.
	(IOCT): New macro.
	(mips_builtin_opcodes): Add Octeon instruction synciobdma.

2008-01-29  Alan Modra  <amodra@bigpond.net.au>

	* ppc-opc.c: Support optional L form mtmsr.

2008-01-24  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (OP_E_extended): Handle r12 like rsp.

2008-01-23  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Add CpuLM to CPU_GENERIC64_FLAGS.
	* i386-init.h: Regenerated.

2008-01-23  Tristan Gingold  <gingold@adacore.com>

	* ia64-dis.c (print_insn_ia64): Display symbolic name of ar.fcr,
	ar.eflag, ar.csd, ar.ssd, ar.cflg, ar.fsr, ar.fir and ar.fdr.

2008-01-22  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Remove CpuMMX2.
	(cpu_flags): Likewise.

	* i386-opc.h (CpuMMX2): Removed.
	(CpuSSE): Updated.

	* i386-opc.tbl: Replace CpuMMX2 with CpuSSE|Cpu3dnowA.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2008-01-22  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Add CPU_VMX_FLAGS and
	CPU_SMX_FLAGS.
	* i386-init.h: Regenerated.

2008-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Use Qword on movddup.
	* i386-tbl.h: Regenerated.

2008-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Put back 16bit movsx/movzx for AT&T syntax.
	* i386-tbl.h: Regenerated.

2008-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (Mx): New.
	(PREFIX_0FC3): Likewise.
	(PREFIX_0FC7_REG_6): Updated.
	(dis386_twobyte): Use PREFIX_0FC3.
	(prefix_table): Add PREFIX_0FC3.  Use Mq on movntq and movntsd.
	Use Mx on movntps, movntpd, movntdq and movntdqa.  Use Md on
	movntss.

2008-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (opcode_modifiers): Add IntelSyntax.
	(operand_types): Add Mem.

	* i386-opc.h (IntelSyntax): New.
	* i386-opc.h (Mem): New.
	(Byte): Updated.
	(Opcode_Modifier_Max): Updated.
	(i386_opcode_modifier): Add intelsyntax.
	(i386_operand_type): Add mem.

	* i386-opc.tbl: Remove Reg16 from movnti.  Add sizes to more
	instructions.

	* i386-reg.tbl: Add size for accumulator.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2008-01-13  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.h (Byte): Fix a typo.

2008-01-12  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/5534
	* i386-gen.c (operand_type_init): Add Dword to
	OPERAND_TYPE_ACC32.  Add Qword to OPERAND_TYPE_ACC64.
	(opcode_modifiers): Remove CheckSize, Byte, Word, Dword,
	Qword and Xmmword.
	(operand_types): Add Byte, Word, Dword, Fword, Qword, Tbyte,
	Xmmword, Unspecified and Anysize.
	(set_bitfield): Make Mmword an alias of Qword.  Make Oword
	an alias of Xmmword.

	* i386-opc.h (CheckSize): Removed.
	(Byte): Updated.
	(Word): Likewise.
	(Dword): Likewise.
	(Qword): Likewise.
	(Xmmword): Likewise.
	(FWait): Updated.
	(OTMax): Likewise.
	(i386_opcode_modifier): Remove checksize, byte, word, dword,
	qword and xmmword.
	(Fword): New.
	(TBYTE): Likewise.
	(Unspecified): Likewise.
	(Anysize): Likewise.
	(i386_operand_type): Add byte, word, dword, fword, qword,
	tbyte xmmword, unspecified and anysize.

	* i386-opc.tbl: Updated to use Byte, Word, Dword, Fword, Qword,
	Tbyte, Xmmword, Unspecified and Anysize.

	* i386-reg.tbl: Add size for accumulator.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2008-01-10  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (REG_0F0E): Renamed to REG_0F0D.
	(REG_0F18): Updated.
	(reg_table): Updated.
	(dis386_twobyte): Updated.  Use "nopQ" on 0x19 to 0x1e.
	(twobyte_has_modrm): Set 1 for 0x19 to 0x1e.

2008-01-08  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (set_bitfield): Use fail () on error.

2008-01-08  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (lineno): New.
	(filename): Likewise.
	(set_bitfield): Report filename and line numer on error.
	(process_i386_opcodes): Set filename and update lineno.
	(process_i386_registers): Likewise.

2008-01-05  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (opcode_modifiers): Rename IntelMnemonic to
	ATTSyntax.

	* i386-opc.h (IntelMnemonic): Renamed to ..
	(ATTSyntax): This
	(Opcode_Modifier_Max): Updated.
	(i386_opcode_modifier): Remove intelmnemonic. Add attsyntax
	and intelsyntax.

	* i386-opc.tbl: Remove IntelMnemonic and update with ATTSyntax
	on fsub, fubp, fsubr, fsubrp, div, fdivp, fdivr and fdivrp.
	* i386-tbl.h: Regenerated.

2008-01-04  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c: Update copyright to 2008.
	* i386-opc.h: Likewise.
	* i386-opc.tbl: Likewise.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2008-01-04  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Add NoRex64 to extractps, movmskpd, movmskps,
	pextrb, pextrw, pinsrb, pinsrw and pmovmskb.
	* i386-tbl.h: Regenerated.

2008-01-03  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Remove CpuSSE4_1_Or_5 and
	CpuSSE4_2_Or_ABM.
	(cpu_flags): Likewise.

	* i386-opc.h (CpuSSE4_1_Or_5): Removed.
	(CpuSSE4_2_Or_ABM): Likewise.
	(CpuLM): Updated.
	(i386_cpu_flags): Remove cpusse4_1_or_5 and cpusse4_2_or_abm.

	* i386-opc.tbl: Replace CpuSSE4_1_Or_5, CpuSSE4_2_Or_ABM and
	Cpu686|CpuPadLock with CpuSSE4_1|CpuSSE5, CpuABM|CpuSSE4_2
	and CpuPadLock, respectively.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2008-01-03  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (opcode_modifiers): Remove No_xSuf.

	* i386-opc.h (No_xSuf): Removed.
	(CheckSize): Updated.

	* i386-tbl.h: Regenerated.

2008-01-02  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Add CpuSSE4_2_Or_ABM to
	CPU_AMDFAM10_FLAGS, CPU_SSE4_2_FLAGS, CpuABM and
	CPU_SSE5_FLAGS.
	(cpu_flags): Add CpuSSE4_2_Or_ABM.

	* i386-opc.h (CpuSSE4_2_Or_ABM): New.
	(CpuLM): Updated.
	(i386_cpu_flags): Add cpusse4_2_or_abm.

	* i386-opc.tbl: Use CpuSSE4_2_Or_ABM instead of
	CpuABM|CpuSSE4_2 on popcnt.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2008-01-02  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.h: Update comments.

2008-01-02  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (opcode_modifiers): Use Qword instead of QWord.
	* i386-opc.h: Likewise.
	* i386-opc.tbl: Likewise.

2008-01-02  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/5534
	* i386-gen.c (opcode_modifiers): Add No_xSuf, CheckSize,
	Byte, Word, Dword, QWord and Xmmword.

	* i386-opc.h (No_xSuf): New.
	(CheckSize): Likewise.
	(Byte): Likewise.
	(Word): Likewise.
	(Dword): Likewise.
	(QWord): Likewise.
	(Xmmword): Likewise.
	(FWait): Updated.
	(i386_opcode_modifier): Add No_xSuf, CheckSize, Byte, Word,
	Dword, QWord and Xmmword.

	* i386-opc.tbl: Add CheckSize|QWord to movq if IgnoreSize is
	used.
	* i386-tbl.h: Regenerated.

2008-01-02  Mark Kettenis  <kettenis@gnu.org>

	* m88k-dis.c (instructions): Fix fcvt.* instructions.
	From Miod Vallat.

For older changes see ChangeLog-2007
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: