A few tweaks required to use Readline as part of the DJGPP port of GDB.
[deliverable/binutils-gdb.git] / readline / CHANGELOG
CommitLineData
d60d9f65
SS
1[Readline-specific changelog. Descriptions of changes to the source are
2 found in the bash changelog.]
3
4 6/9
5 ---
6Makefile.in
7 - quote value of ${INSTALL_DATA} when passing it to makes in
8 subdirectories
9
10 7/1
11 ---
12Makefile.in
13 - don't pass INSTALL_DATA to a make in the `doc' subdirectory; let
14 autoconf set the value itself in the Makefile
15 - removed a stray `-' before $(RANLIB) in the `install' recipe
16
17doc/Makefile.in
18 - add a VPATH assignment so the documentation is not remade if it's
19 already up-to-date in the distribution
20
21configure.in
22 - call AC_SUBST(LOCAL_LDFLAGS), since Makefile.in contains
23 @LOCAL_LDFLAGS@
24
25 7/9
26 ---
27
28config.h.in
29 - add define lines for STRUCT_WINSIZE_IN_SYS_IOCTL and
30 STRUCT_WINSIZE_IN_TERMIOS
31
32configure.in
33 - call BASH_STRUCT_WINSIZE to look for the definition of
34 `struct winsize'
35
36 7/17
37 ----
38configure.in
39 - call AC_MINIX
40
41config.h.in
42 - add define line for AC_MINIX
43
44 7/18
45 ----
46Makefile.in
47 - add `install-shared' and `uninstall-shared' targets
48
49 8/4
50 ---
51Makefile.in
52 - install and uninstall libhistory.a in the `install' and
53 `uninstall' targets
54
55 9/4
56 ---
57configure.in
58 - bumped LIBVERSION up to 2.1.1, indicating that this is patch
59 level 1 to release 2.1
60
61
62 9/16
63 ----
64Makefile.in
65 - `make distclean' now descends into the `examples' subdir
66
67doc/Makefile.in
68 - the `distclean' and `maintainer-clean' targets should remove
69 Makefile
70
71examples/Makefile.in
72 - added the various clean targets
73
74 4/2
75 ---
76configure.in
77 - bumped LIBVERSION up to 2.2
c862e87b
JM
78
79 4/18
80 ----
81[readline-2.2 released]
82
83 4/20
84 ----
85Makefile.in
86 - make `libhistory.a' a dependency of `install'
87 - fixed a typo in the recipe for `install' that copied libreadline.a
88 to libhistory.old right after installing it
89
90 4/27
91 ----
92doc/Makefile.in
93 - install {readline,history}.info out of the source directory if
94 they are not found in the current (build) directory -- only an
95 issue if the libraries are built in a different directory than
96 the source directory
97
98 5/1
99 ---
100support/shobj-conf
101 - script from the bash distribution to do shared object and library
102 configuration
103
104shlib/Makefile.in
105 - new directory and makefile to handle building shared versions of
106 libreadline and libhistory, controlled by support/shobj-conf
107
108 5/7
109 ---
110doc/Makefile.in
111 - set SHELL to /bin/sh, rather than relying on make to be correct
112
113 5/14
114 ----
115savestring.c
116 - new file, moved from shell.c, for backwards compatibility
117
118Makefile.in, shlib/Makefile.in
119 - make sure savestring.c is compiled and added to libreadline and
120 libhistory
121
122[THERE ARE NO MORE #ifdef SHELL LINES IN THE C SOURCE FILES.]
123
124 5/15
125 ----
126README
127 - updated description of shared library creation for the new scheme
128
129[THERE ARE NO MORE #ifdef SHELL LINES IN ANY OF THE SOURCE FILES.]
130
131Makefile.in
132 - bumped SHLIB_MAJOR up to 4 since we've augmented the library
133 API
134 - rlconf.h is now one of the installed headers, so applications can
135 find out whether things like vi-mode are available in the installed
136 libreadline
137
138 5/20
139 ----
140configure.in
141 - changed RL_LIBRARY_VERSION to 4.0 to match the version of the
142 installed shared libraries
143
144 6/5
145 ---
146rlstdc.h
147 - new file
148
149Makefile.in
150 - rlstdc.h is now one of the installed headers
151
152 8/3
153 ---
154shlib/Makefile.in
155 - made the suffix rule that creates xx.so from xx.c write the
156 compiler output to `a.o', which is then mv'd to xx.so, because
157 some compilers (Sun WSpro 4.2, for example) don't allow any
158 suffixes other than `.o' for `cc -c' (not even `a.out')
159
160 9/15
161 ----
162
163Makefile.in
164 - AR and ARFLAGS are now substituted by configure, used in recipes
165 that build the libraries
166
167configure.in
168 - use AC_CHECK_PROG to check for ar
169 - set ARFLAGS if it has not already been set in the environment
170
171 10/5
172 ----
173Makefile.in
174 - removed savestring.o from object file list
175
176 10/28
177 -----
178shlib/Makefile.in
179 - don't use a fixed filename in the .c.so suffix rule to avoid
180 problems with parallel makes
181
182 12/21
183 -----
184support/shlib-install
185 - new script to install shared readline and history libraries
186
187shlib/Makefile.in
188 - changed to call shlib-install for install and uninstall targets
189
190[readline-4.0-beta1 frozen]
191
192 12/22
193 -----
194configure.in
195 - call AC_SUBST for SHOBJ_XLDFLAGS and SHLIB_LIBS
196
197shlib/Makefile.in
198 - SHOBJ_XLDFLAGS and SHLIB_LIBS are now substituted by configure
199 - add $(SHLIB_LIBS) at end of command line that builds the shared
200 libraries (currently needed only by AIX 4.2)
201
202 12/31
203 -----
204MANIFEST, MANIFEST.doc
205 - the TOC html files are no longer generated and no longer part of
206 the distribution
207
208 2/18/1999
209 ---------
210configure.in
211 - set MAKE_SHELL to /bin/sh and substitute into the Makefiles
212
213Makefile.in,{doc,examples,shlib}/Makefile.in
214 - set SHELL from @MAKE_SHELL@
215
216[readline-4.0 released]
1b17e766
EZ
217
218 3/11
219 ----
220doc/Makefile.in
221 - removed references to HTMLTOC, since separate HTML table-of-contents
222 files are no longer created
223
224examples/Makefile.in
225 - remove `*.exe' in clean target for MS-DOS
226
227Makefile.in
228 - make `readline' target depend on ./libreadline.a
229 - configure now substitutes TERMCAP_LIB into Makefile.in
230 - use ${TERMCAP_LIB} instead of -ltermcap in recipe for `readline'
231 - clean target now removes readline and readline.exe in case they
232 get built
233
234configure.in
235 - use `pwd.exe' to set BUILD_DIR on MS-DOS DJGPP
236
237 3/15
238 ----
239support/shlib-install
240 - Irix 5.x and Irix 6.x should install shared libraries like Solaris 2
241 - changes for installing on hp-ux 1[01].x
242
243 3/23
244 ----
245configure.in
246 - make sure that the $CC argument to shobj-conf is quoted
247
248 4/8
249 ---
250
251xmalloc.h, rlprivate.h, rlshell.h
252 - new files
253
254Makefile.in,shlib/Makefile.in
255 - add dependencies on xmalloc.h, rlshell.h
256 - add xmalloc.h, rlprivate.h, rlshell.h to list of header files
257
258MANIFEST
259 - add xmalloc.h, rlprivate.h, rlshell.h
260
261 4/9
262 ---
263Makefile.in,shlib/Makefile.in
264 - add dependencies on rlprivate.h
265
266 4/13
267 ----
268doc/Makefile.in
269 - add variable, PSDVI, which is the desired resolution of the
270 generated postscript files. Set to 300 because I don't have
271 any 600-dpi printers
272 - set LANGUAGE= before calling makeinfo, so messages are in English
273 - add rluserman.{info,dvi,ps,html} to appropriate variables
274 - add rules to create rluserman.{info,dvi,ps,html}
275 - install and uninstall rluserman.info, but don't update the directory
276 file in $(infodir) yet
277
278MANIFEST
279 - add doc/rluserman.{texinfo,info,dvi,ps,html}
280
281 4/30
282 ----
283configure.in
284 - updated library version to 4.1
285
286 5/3
287 ---
288configure.in
289 - SHLIB_MAJOR and SHLIB_MINOR shared library version numbers are
290 constructed from $LIBRARY_VERSION and substituted into Makefiles
291
292 5/5
293 ---
294support/shlib-install
295 - OSF/1 installs shared libraries like Solaris
296
297Makefile.in
298 - broke the header file install and uninstall into two new targets:
299 install-headers and uninstall-headers
300 - install and uninstall depend on install-headers and uninstall-headers
301 respectively
302 - changed install-shared and uninstall-shared targets to depend on
303 install-headers and uninstall-headers, respectively, so users may
304 choose to install only the shared libraries. I'm not sure about
305 the uninstall one yet -- maybe it should check whether or not
306 the static libraries are installed and not remove the header files
307 if they are
308
309 9/3
310 ---
311configure.in, config.h.in
312 - added test for memmove (for later use)
313 - changed version to 4.1-beta1
314
315 9/13
316 ----
317examples/rlfe.c
318 - Per Bothner's `rlfe' readline front-end program
319
320examples/Makefile.in
321 - added rules to build rlfe
322
323 9/21
324 ----
325support/shlib-install
326 - changes to handle FreeBSD-3.x elf or a.out shared libraries, which
327 have different semantics and need different naming conventions
328
329 1/24/2000
330 ---------
331doc/Makefile.in
332 - remove *.bt and *.bts on `make clean'
333
334 2/4
335 ---
336
337
338configure.in
339 - changed LIBVERSION to 4.1-beta5
This page took 0.065571 seconds and 4 git commands to generate.