| | 1 | 2019-09-23 Dimitar Dimitrov <dimitar@dinux.eu> |
| | 2 | |
| | 3 | * MAINTAINERS: Add myself as PRU maintainer. |
| | 4 | * configure: Regenerated. |
| | 5 | * configure.tgt: Add PRU. |
| | 6 | |
| | 7 | 2019-09-20 Alan Modra <amodra@gmail.com> |
| | 8 | |
| | 9 | * ppc/emul_generic.c (emul_add_tree_options): Delete old bfd code. |
| | 10 | |
| | 11 | 2019-09-18 Alan Modra <amodra@gmail.com> |
| | 12 | |
| | 13 | * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c, |
| | 14 | * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c, |
| | 15 | * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c, |
| | 16 | * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c, |
| | 17 | * rx/trace.c: Update throughout for bfd section macro changes. |
| | 18 | |
| | 19 | 2019-06-13 Stafford Horne <shorne@gmail.com> |
| | 20 | |
| | 21 | * or1k/cpu.c: Regenerate. |
| | 22 | * or1k/cpu.h: Regenerate. |
| | 23 | * or1k/decode.c: Regenerate. |
| | 24 | * or1k/decode.h: Regenerate. |
| | 25 | * or1k/model.c: Regenerate. |
| | 26 | * or1k/sem-switch.c: Regenerate. |
| | 27 | * or1k/sem.c: Regenerate. |
| | 28 | |
| | 29 | 2019-02-28 Joel Brobecker <brobecker@adacore.com> |
| | 30 | |
| | 31 | * MAINTAINERS: Move Mike Frysinger to past maintainers' section. |
| | 32 | |
| | 33 | 2019-02-13 Simon Marchi <simon.marchi@ericsson.com> |
| | 34 | |
| | 35 | * MAINTAINERS: Add Andrew Burgess as global maintainer. |
| | 36 | |
| | 37 | 2019-01-03 Pavel I. Kryukov <kryukov@frtk.ru> |
| | 38 | |
| | 39 | * sim-base.h: Add 'extern C' if header is compiled with C++. |
| | 40 | |
| | 41 | 2018-12-06 Andrew Burgess <andrew.burgess@embecosm.com> |
| | 42 | |
| | 43 | * common/acinclude.m4 (enable-cgen-maint): Support passing path to |
| | 44 | cgen source tree. |
| | 45 | * cris/configure: Regenerate. |
| | 46 | * frv/configure: Regenerate. |
| | 47 | * iq2000/configure: Regenerate. |
| | 48 | * lm32/configure: Regenerate. |
| | 49 | * m32r/configure: Regenerate. |
| | 50 | * or1k/configure: Regenerate. |
| | 51 | * sh64/configure: Regenerate. |
| | 52 | |
| | 53 | 2018-10-05 Stafford Horne <shorne@gmail.com> |
| | 54 | |
| | 55 | * or1k/cpu.h: Regenerate. |
| | 56 | * or1k/decode.c: Regenerate. |
| | 57 | * or1k/decode.h: Regenerate. |
| | 58 | * or1k/model.c: Regenerate. |
| | 59 | * or1k/sem-switch.c: Regenerate. |
| | 60 | * or1k/sem.c: Regenerate: |
| | 61 | |
| | 62 | 2018-07-20 Maciej W. Rozycki <macro@mips.com> |
| | 63 | |
| | 64 | * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV |
| | 65 | ISA maintenance. |
| | 66 | |
| | 67 | 2018-07-19 DJ Delorie <dj@redhat.com> |
| | 68 | |
| | 69 | * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer. |
| | 70 | |
| | 71 | 2018-07-14 Stafford Horne <shorne@gmail.com> |
| | 72 | |
| | 73 | * MAINTAINERS (or1k): Add myself as or1k maintainer. |
| | 74 | |
| | 75 | 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> |
| | 76 | |
| | 77 | * All configure.ac: Remove AC_PREREQ. |
| | 78 | * All configure: Re-generate. |
| | 79 | |
| | 80 | 2018-01-22 Maciej W. Rozycki <macro@mips.com> |
| | 81 | |
| | 82 | * MAINTAINERS: Update my company e-mail address. |
| | 83 | |
| | 84 | 2017-12-12 Stafford Horne <shorne@gmail.com> |
| | 85 | Peter Gavin <pgavin@gmail.com> |
| | 86 | |
| | 87 | * configure: Regenerated. |
| | 88 | * or1k/aclocal.m4: Generated. |
| | 89 | * or1k/config.in: Generated. |
| | 90 | * or1k/configure: Generated. |
| | 91 | |
| | 92 | 2017-12-12 Stafford Horne <shorne@gmail.com> |
| | 93 | Peter Gavin <pgavin@gmail.com> |
| | 94 | |
| | 95 | * or1k/arch.c: Generated. |
| | 96 | * or1k/arch.h: Generated. |
| | 97 | * or1k/cpu.c: Generated. |
| | 98 | * or1k/cpu.h: Generated. |
| | 99 | * or1k/cpuall.h: Generated. |
| | 100 | * or1k/decode.c: Generated. |
| | 101 | * or1k/decode.h: Generated. |
| | 102 | * or1k/model.c: Generated. |
| | 103 | * or1k/sem-switch.c: Generated. |
| | 104 | * or1k/sem.c: Generated. |
| | 105 | |
| | 106 | 2017-12-12 Stafford Horne <shorne@gmail.com> |
| | 107 | Peter Gavin <pgavin@gmail.com> |
| | 108 | |
| | 109 | * configure.tgt: Add or1k sim. |
| | 110 | * or1k/README: New file. |
| | 111 | * or1k/Makefile.in: New file. |
| | 112 | * or1k/configure.ac: New file. |
| | 113 | * or1k/mloop.in: New file. |
| | 114 | * or1k/or1k-sim.h: New file. |
| | 115 | * or1k/or1k.c: New file. |
| | 116 | * or1k/sim-if.c: New file. |
| | 117 | * or1k/sim-main.h: New file. |
| | 118 | * or1k/traps.c: New file. |
| | 119 | |
| | 120 | 2017-11-01 James Bowman <james.bowman@ftdichip.com> |
| | 121 | |
| | 122 | * ft32/interp.c (step_once): Add ft32 shortcode decoder. |
| | 123 | |
| | 124 | 2017-10-12 James Bowman <james.bowman@ftdichip.com> |
| | 125 | |
| | 126 | * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15. |
| | 127 | |
| | 128 | 2017-10-12 James Bowman <james.bowman@ftdichip.com> |
| | 129 | |
| | 130 | * MAINTAINERS (ft32): Add myself. |
| | 131 | |
| | 132 | 2017-10-03 Jim Wilson <wilson@tuliptree.org> |
| | 133 | |
| | 134 | * MAINTAINERS (aarch64): Update my email address. |
| | 135 | |
| | 136 | 2017-09-06 John Baldwin <jhb@FreeBSD.org> |
| | 137 | |
| | 138 | * configure.ac: Honor existing CC_FOR_BUILD in environment. |
| | 139 | * configure: Regenerate. |
| | 140 | |
| | 141 | 2017-02-14 Jim Wilson <jim.wilson@linaro.org> |
| | 142 | |
| | 143 | * MAINTAINTERS (aarch64): Add myself. |
| | 144 | |
| | 145 | 2016-12-14 Maciej W. Rozycki <macro@imgtec.com> |
| | 146 | |
| | 147 | * MAINTAINERS (Maintainers for particular sims): Add myself as |
| | 148 | a MIPS maintainer. |
| | 149 | |
| | 150 | 2016-02-03 Maciej W. Rozycki <macro@linux-mips.org> |
| | 151 | |
| | 152 | * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer. |
| | 153 | |
| | 154 | 2016-01-09 Mike Frysinger <vapier@gentoo.org> |
| | 155 | |
| | 156 | * configure.ac: Delete sim_common check and the |
| | 157 | AC_CONFIG_SUBDIRS(common) call. |
| | 158 | * configure: Regenerate. |
| | 159 | * configure.tgt (sim_common): Delete the variable. |
| | 160 | |
| | 161 | 2016-01-09 Mike Frysinger <vapier@gentoo.org> |
| | 162 | |
| | 163 | * .gitignore: Delete /common/cconfig.h entry. |
| | 164 | |
| | 165 | 2016-01-05 Nick Clifton <nickc@redhat.com> |
| | 166 | |
| | 167 | * MAINTAINERS: Add myself as AArch64 sim maintainer. |
| | 168 | |
| | 169 | 2015-12-09 Tristan Gingold <gingold@adacore.com> |
| | 170 | |
| | 171 | * aarch64/simulator.c: Remove syscall.h include. |
| | 172 | |
| | 173 | 2015-12-26 Mike Frysinger <vapier@gentoo.org> |
| | 174 | |
| | 175 | * README-HACKING: Delete mention of tconfig.h. |
| | 176 | |
| | 177 | 2015-11-24 Nick Clifton <nickc@redhat.com> |
| | 178 | |
| | 179 | * configure.tgt: Add aarch64 entry. |
| | 180 | * configure: Regenerate. |
| | 181 | |
| | 182 | 2015-06-23 Mike Frysinger <vapier@gentoo.org> |
| | 183 | |
| | 184 | * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING. |
| | 185 | * configure: Regenerate. |
| | 186 | |
| | 187 | 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
| | 188 | |
| | 189 | * README-HACKING: Change configure.in to configure.ac. |
| | 190 | |
| | 191 | 2015-04-02 H.J. Lu <hongjiu.lu@intel.com> |
| | 192 | |
| | 193 | * arm/configure: Regenerated. |
| | 194 | * avr/configure: Likewise. |
| | 195 | * bfin/configure: Likewise. |
| | 196 | * common/configure: Likewise. |
| | 197 | * cr16/configure: Likewise. |
| | 198 | * cris/configure: Likewise. |
| | 199 | * d10v/configure: Likewise. |
| | 200 | * erc32/configure: Likewise. |
| | 201 | * frv/configure: Likewise. |
| | 202 | * ft32/configure: Likewise. |
| | 203 | * h8300/configure: Likewise. |
| | 204 | * igen/configure: Likewise. |
| | 205 | * iq2000/configure: Likewise. |
| | 206 | * lm32/configure: Likewise. |
| | 207 | * m32c/configure: Likewise. |
| | 208 | * m32r/configure: Likewise. |
| | 209 | * m68hc11/configure: Likewise. |
| | 210 | * mcore/configure: Likewise. |
| | 211 | * microblaze/configure: Likewise. |
| | 212 | * mips/configure: Likewise. |
| | 213 | * mn10300/configure: Likewise. |
| | 214 | * moxie/configure: Likewise. |
| | 215 | * msp430/configure: Likewise. |
| | 216 | * ppc/configure: Likewise. |
| | 217 | * rl78/configure: Likewise. |
| | 218 | * rx/configure: Likewise. |
| | 219 | * sh/configure: Likewise. |
| | 220 | * sh64/configure: Likewise. |
| | 221 | * v850/configure: Likewise. |
| | 222 | |
| | 223 | 2015-04-01 H.J. Lu <hongjiu.lu@intel.com> |
| | 224 | |
| | 225 | * common/Make-common.in (CSEARCH): Remove $(ZLIBINC). |
| | 226 | (BFD_LIB): Remove $(ZLIB). |
| | 227 | (CONFIG_LIBS): Add $(ZLIB). |
| | 228 | * ppc/Makefile.in (ZLIBINC): Removed. |
| | 229 | (INCLUDES): Remove $(ZLIBINC). |
| | 230 | (BFD_LIB): Remove $(ZLIB). |
| | 231 | |
| | 232 | 2015-04-01 H.J. Lu <hongjiu.lu@intel.com> |
| | 233 | |
| | 234 | * arm/configure: Regenerated. |
| | 235 | * avr/configure: Likewise. |
| | 236 | * bfin/configure: Likewise. |
| | 237 | * common/configure: Likewise. |
| | 238 | * cr16/configure: Likewise. |
| | 239 | * cris/configure: Likewise. |
| | 240 | * d10v/configure: Likewise. |
| | 241 | * erc32/configure: Likewise. |
| | 242 | * frv/configure: Likewise. |
| | 243 | * ft32/configure: Likewise. |
| | 244 | * h8300/configure: Likewise. |
| | 245 | * igen/configure: Likewise. |
| | 246 | * iq2000/configure: Likewise. |
| | 247 | * lm32/configure: Likewise. |
| | 248 | * m32c/configure: Likewise. |
| | 249 | * m32r/configure: Likewise. |
| | 250 | * m68hc11/configure: Likewise. |
| | 251 | * mcore/configure: Likewise. |
| | 252 | * microblaze/configure: Likewise. |
| | 253 | * mips/configure: Likewise. |
| | 254 | * mn10300/configure: Likewise. |
| | 255 | * moxie/configure: Likewise. |
| | 256 | * msp430/configure: Likewise. |
| | 257 | * ppc/configure: Likewise. |
| | 258 | * rl78/configure: Likewise. |
| | 259 | * rx/configure: Likewise. |
| | 260 | * sh/configure: Likewise. |
| | 261 | * sh64/configure: Likewise. |
| | 262 | * v850/configure: Likewise. |
| | 263 | |
| | 264 | 2015-03-29 Mike Frysinger <vapier@gentoo.org> |
| | 265 | |
| | 266 | * configure: Regenerate. |
| | 267 | * configure.ac: Delete sim_testsuite check and config in testsuite. |
| | 268 | * configure.tgt (sim_testsuite): Delete everywhere. |
| | 269 | |
| | 270 | 2015-03-28 Mike Frysinger <vapier@gentoo.org> |
| | 271 | |
| | 272 | * configure: Regenerate. |
| | 273 | * configure.tgt (avr*-*-*): Set sim_testsuite=yes. |
| | 274 | |
| | 275 | 2015-03-28 James Bowman <james.bowman@ftdichip.com> |
| | 276 | |
| | 277 | * configure.tgt: Add FT32 entry. |
| | 278 | * configure: Regenerate. |
| | 279 | |
| | 280 | 2015-03-16 Mike Frysinger <vapier@gentoo.org> |
| | 281 | |
| | 282 | * .gitignore: Delete tconfig.h. |
| | 283 | * README-HACKING: Change tconfig.in to tconfig.h. |
| | 284 | |
| | 285 | 2014-03-12 Nick Clifton <nickc@redhat.com> |
| | 286 | |
| | 287 | * MAINTAINERS: Add myself as the maintainer for the MSP430. |
| | 288 | |
| | 289 | 2014-03-10 Mike Frysinger <vapier@gentoo.org> |
| | 290 | |
| | 291 | * configure.tgt (msp430*-*-*): Set sim_testsuite to yes. |
| | 292 | * configure: Regenerate. |
| | 293 | |
| | 294 | 2014-01-06 Tom Tromey <tromey@redhat.com> |
| | 295 | |
| | 296 | * common/cgen-trace.c: Don't use old VA_* macros. |
| | 297 | * common/sim-load.c (xprintf): Likewise. |
| | 298 | * common/sim-trace.c (trace_printf, debug_printf): Likewise. |
| | 299 | |
| | 300 | 2014-01-06 Tom Tromey <tromey@redhat.com> |
| | 301 | |
| | 302 | * README-HACKING: Don't use PARAMS. |
| | 303 | * arm/wrapper.c: Don't use PARAMS. |
| | 304 | * bfin/sim-main.h: Don't use PARAMS. |
| | 305 | * common/callback.c: Don't use PARAMS. |
| | 306 | * common/cgen-trace.c: Don't use PARAMS. |
| | 307 | * common/run-sim.h: Don't use PARAMS. |
| | 308 | * common/run.c: Don't use PARAMS. |
| | 309 | * common/sim-base.h: Don't use PARAMS. |
| | 310 | * common/sim-load.c: Don't use PARAMS. |
| | 311 | * common/sim-options.h: Don't use PARAMS. |
| | 312 | * common/sim-trace.c: Don't use PARAMS. |
| | 313 | * common/sim-trace.h: Don't use PARAMS. |
| | 314 | * common/sim-utils.h: Don't use PARAMS. |
| | 315 | * cr16/cr16_sim.h: Don't use PARAMS. |
| | 316 | * cr16/gencode.c: Don't use PARAMS. |
| | 317 | * cr16/interp.c: Don't use PARAMS. |
| | 318 | * cr16/simops.c: Don't use PARAMS. |
| | 319 | * d10v/d10v_sim.h: Don't use PARAMS. |
| | 320 | * d10v/gencode.c: Don't use PARAMS. |
| | 321 | * d10v/interp.c: Don't use PARAMS. |
| | 322 | * d10v/simops.c: Don't use PARAMS. |
| | 323 | * erc32/erc32.c: Don't use PARAMS. |
| | 324 | * erc32/exec.c: Don't use PARAMS. |
| | 325 | * erc32/float.c: Don't use PARAMS. |
| | 326 | * erc32/func.c: Don't use PARAMS. |
| | 327 | * erc32/sis.c: Don't use PARAMS. |
| | 328 | * erc32/sis.h: Don't use PARAMS. |
| | 329 | * mips/interp.c: Don't use PARAMS. |
| | 330 | * mips/sim-main.h: Don't use PARAMS. |
| | 331 | * sh/interp.c: Don't use PARAMS. |
| | 332 | * v850/sim-main.h: Don't use PARAMS. |
| | 333 | * v850/v850_sim.h: Don't use PARAMS. |
| | 334 | |
| | 335 | 2013-11-07 Will Newton <will.newton@linaro.org> |
| | 336 | |
| | 337 | PR gdb/15508 |
| | 338 | * arm/wrapper.c (sim_create_inferior): Call init before |
| | 339 | accessing STATE. |
| | 340 | |
| | 341 | 2013-11-07 Will Newton <will.newton@linaro.org> |
| | 342 | |
| | 343 | PR gdb/8989 |
| | 344 | * arm/wrapper.c (sim_create_inferior): Avoid calling |
| | 345 | bfd_get_mach with a NULL bfd. |
| | 346 | |
| | 347 | 2013-06-21 Nick Clifton <nickc@redhat.com> |
| | 348 | |
| | 349 | * msp430: New Directory. |
| | 350 | * configure.tgt: Add it. |
| | 351 | * configure: Regenerate. |
| | 352 | |
| | 353 | 2013-03-15 Steve Ellcey <sellcey@mips.com> |
| | 354 | |
| | 355 | * arm/wrapper.c (sim_complete_command): Make char arguments const. |
| | 356 | * avr/interp.c (sim_complete_command): Ditto. |
| | 357 | * common/sim-options.c (sim_complete_command): Ditto. |
| | 358 | * cr16/interp.c (sim_complete_command): Ditto. |
| | 359 | * erc32/interf.c (sim_complete_command): Ditto. |
| | 360 | * m32c/gdb-if.c (sim_complete_command): Ditto. |
| | 361 | * microblaze/interp.c (sim_complete_command): Ditto. |
| | 362 | * ppc/sim_calls.c (sim_complete_command): Ditto. |
| | 363 | * rl78/gdb-if.c (sim_complete_command): Ditto. |
| | 364 | * rx/gdb-if.c (sim_complete_command): Ditto. |
| | 365 | * sh/interp.c (sim_complete_command): Ditto. |
| | 366 | |
| | 367 | 2013-01-01 Joel Brobecker <brobecker@adacore.com> |
| | 368 | |
| | 369 | Update year range in copyright notice of all files. |
| | 370 | |
| | 371 | 2012-12-19 Joel Brobecker <brobecker@adacore.com> |
| | 372 | |
| | 373 | Update old contact info in GPL license notices. |
| | 374 | |
| | 375 | 2012-12-19 Joel Brobecker <brobecker@adacore.com> |
| | 376 | |
| | 377 | Update the non-FSF-copyrighted files in sim to GPLv3 or later. |
| | 378 | |
| | 379 | 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com> |
| | 380 | |
| | 381 | * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS |
| | 382 | condition. |
| | 383 | * common/acinclude.m4: Define lt_cv_dlopen_libs. |
| | 384 | * arm/configure: Regenerate. |
| | 385 | * avr/configure: Regenerate. |
| | 386 | * bfin/configure: Regenerate. |
| | 387 | * common/configure: Regenerate. |
| | 388 | * cr16/configure: Regenerate. |
| | 389 | * cris/configure: Regenerate. |
| | 390 | * d10v/configure: Regenerate. |
| | 391 | * erc32/configure: Regenerate. |
| | 392 | * frv/configure: Regenerate. |
| | 393 | * h8300/configure: Regenerate. |
| | 394 | * igen/configure: Regenerate. |
| | 395 | * iq2000/configure: Regenerate. |
| | 396 | * lm32/configure: Regenerate. |
| | 397 | * m32c/configure: Regenerate. |
| | 398 | * m32r/configure: Regenerate. |
| | 399 | * m68hc11/configure: Regenerate. |
| | 400 | * mcore/configure: Regenerate. |
| | 401 | * microblaze/configure: Regenerate. |
| | 402 | * mips/configure: Regenerate. |
| | 403 | * mn10300/configure: Regenerate. |
| | 404 | * moxie/configure: Regenerate. |
| | 405 | * ppc/configure: Regenerate. |
| | 406 | * rl78/configure: Regenerate. |
| | 407 | * rx/configure: Regenerate. |
| | 408 | * sh/configure: Regenerate. |
| | 409 | * sh64/configure: Regenerate. |
| | 410 | * testsuite/configure: Regenerate. |
| | 411 | * v850/configure: Regenerate. |
| | 412 | |
| | 413 | 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com> |
| | 414 | |
| | 415 | * MAINTAINERS: Update my email address. |
| | 416 | |
| | 417 | 2012-09-24 Steve Ellcey <sellcey@mips.com> |
| | 418 | |
| | 419 | * mips/basic.exp: Add mips*-mti-elf* target. |
| | 420 | * configure.ac: Add mips*-mti-elf* target. |
| | 421 | * configure: Regenerate. |
| | 422 | |
| | 423 | 2012-06-15 Joel Brobecker <brobecker@adacore.com> |
| | 424 | |
| | 425 | * configure: Regenerate. |
| | 426 | |
| | 427 | 2012-06-06 Michael Eager <eager@eagercon.com> |
| | 428 | |
| | 429 | * microblaze/interp.c (config.h): Add #include. |
| | 430 | |
| | 431 | 2011-11-29 Joel Brobecker <brobecker@adacore.com> |
| | 432 | |
| | 433 | * MAINTAINERS (Global Maintainers): New section. Add Mike |
| | 434 | Frysinger. |
| | 435 | |
| | 436 | 2011-11-28 DJ Delorie <dj@redhat.com> |
| | 437 | |
| | 438 | * configure.tgt: Add rl78 support. |
| | 439 | * configure: Regenerate. |
| | 440 | * rl78: New directory. |
| | 441 | * MAINTAINERS: Add myself as RL78 maintainer. |
| | 442 | |
| | 443 | 2011-07-08 Hans-Peter Nilsson <hp@axis.com> |
| | 444 | |
| | 445 | * MAINTAINERS: Remove Thiemo Seufer. |
| | 446 | |
| | 447 | 2011-06-04 Mike Frysinger <vapier@gentoo.org> |
| | 448 | |
| | 449 | * configure.tgt (bfin-*-*): Add sim_testsuite=yes. |
| | 450 | * configure: Regenerate. |
| | 451 | |
| | 452 | 2011-05-04 Joseph Myers <joseph@codesourcery.com> |
| | 453 | |
| | 454 | * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't |
| | 455 | handle targets. |
| | 456 | * configure: Regenerate. |
| | 457 | |
| | 458 | 2011-03-05 Mike Frysinger <vapier@gentoo.org> |
| | 459 | |
| | 460 | * MAINTAINERS: Add bfin entry. |
| | 461 | * configure.tgt (bfin-*-*): Handle bfin targets. |
| | 462 | * configure: Regenerate. |
| | 463 | |
| | 464 | 2011-01-05 Mike Frysinger <vapier@gentoo.org> |
| | 465 | |
| | 466 | * .gitignore: Add /*/hw-config.h. |
| | 467 | |
| | 468 | 2010-12-23 Mike Frysinger <vapier@gentoo.org> |
| | 469 | |
| | 470 | * .gitignore: New file. |
| | 471 | |
| | 472 | 2010-07-28 DJ Delorie <dj@redhat.com> |
| | 473 | |
| | 474 | * MAINTAINERS: Add self as RX maintainer. Sort list. |
| | 475 | |
| | 476 | 2010-06-08 Nick Clifton <nickc@redhat.com> |
| | 477 | |
| | 478 | * reg.c (set_oszc): Use unsigned int for the mask. |
| | 479 | (set_szc, set_osz, set_sz): Likewise. |
| | 480 | |
| | 481 | 2010-04-26 Mike Frysinger <vapier@gentoo.org> |
| | 482 | |
| | 483 | * configure.ac: Target logic moved out to and included from ... |
| | 484 | * configure.tgt: ... this new file. |
| | 485 | * configure: Regenerated. |
| | 486 | |
| | 487 | 2010-04-12 Mike Frysinger <vapier@gentoo.org> |
| | 488 | |
| | 489 | * README-HACKING: Add more sections. |
| | 490 | |
| | 491 | 2010-02-11 Doug Evans <dje@sebabeach.org> |
| | 492 | |
| | 493 | * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c, |
| | 494 | * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c, |
| | 495 | * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c, |
| | 496 | * cris/semcrisv32f-switch.c: Regenerate. |
| | 497 | |
| | 498 | 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| | 499 | |
| | 500 | * avr/configure: Regenerate. |
| | 501 | * cris/configure: Regenerate. |
| | 502 | * microblaze/configure: Regenerate. |
| | 503 | |
| | 504 | 2010-01-02 Doug Evans <dje@sebabeach.org> |
| | 505 | |
| | 506 | * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c, |
| | 507 | * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c, |
| | 508 | * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c, |
| | 509 | * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h, |
| | 510 | * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c, |
| | 511 | * cris/semcrisv32f-switch.c: Regenerate, update copyright year. |
| | 512 | |
| | 513 | 2010-01-01 Doug Evans <dje@sebabeach.org> |
| | 514 | |
| | 515 | * cris/mloop.in: Fix copyright year update snafu. |
| | 516 | |
| | 517 | 2009-11-24 Joel Brobecker <brobecker@adacore.com> |
| | 518 | |
| | 519 | * common/aclocal.m4: Add include of ../../config/zlib.m4. |
| | 520 | * common/common.m4: Use AM_ZLIB to check for zlib support. |
| | 521 | * ppc/configure.ac: Likewise. |
| | 522 | * arm/configure, avr/configure, common/configure, cr16/configure, |
| | 523 | cris/configure, d10v/configure, erc32/configure, frv/configure, |
| | 524 | h8300/configure, iq2000/configure, lm32/configure, m32c/configure, |
| | 525 | m32r/configure, m68hc11/configure, mcore/configure, |
| | 526 | microblaze/configure, mips/configure, mn10300/configure, |
| | 527 | moxie/configure, ppc/configure, sh/configure, sh64/configure, |
| | 528 | v850/configure: Regenerate. |
| | 529 | |
| | 530 | 2009-11-24 DJ Delorie <dj@redhat.com> |
| | 531 | |
| | 532 | * rx: New directory. |
| | 533 | * configure.ac: Add entry for Renesas RX. |
| | 534 | * configure: Regenerate. |
| | 535 | |
| | 536 | 2009-11-22 Doug Evans <dje@sebabeach.org> |
| | 537 | |
| | 538 | * cris/cpuall.h: Regenerate. |
| | 539 | * cris/cpuv10.h: Regenerate. |
| | 540 | * cris/cpuv32.h: Regenerate. |
| | 541 | * cris/decodev10.c: Regenerate. |
| | 542 | * cris/decodev10.h: Regenerate. |
| | 543 | * cris/decodev32.c: Regenerate. |
| | 544 | * cris/decodev32.h: Regenerate. |
| | 545 | |
| | 546 | 2009-11-12 Tristan Gingold <gingold@adacore.com> |
| | 547 | |
| | 548 | * avr/interp.c (sim_write): Allow byte access. |
| | 549 | (sim_read): Ditto. |
| | 550 | |
| | 551 | 2009-11-12 Tristan Gingold <gingold@adacore.com> |
| | 552 | |
| | 553 | * avr/interp.c (sim_load): Clear memory before loading. |
| | 554 | |
| | 555 | 2009-11-09 Tristan Gingold <gingold@adacore.com> |
| | 556 | |
| | 557 | * avr/interp.c (sim_resume): Fix typo for OP_ret. |
| | 558 | |
| | 559 | 2009-10-23 Doug Evans <dje@sebabeach.org> |
| | 560 | |
| | 561 | * cris/arch.c: Regenerate. |
| | 562 | * cris/arch.h: Regenerate. |
| | 563 | * cris/cpuall.h: Regenerate. |
| | 564 | * cris/cpuv10.c: Regenerate. |
| | 565 | * cris/cpuv10.h: Regenerate. |
| | 566 | * cris/cpuv32.c: Regenerate. |
| | 567 | * cris/cpuv32.h: Regenerate. |
| | 568 | * cris/cris-desc.c: Regenerate. |
| | 569 | * cris/cris-desc.h: Regenerate. |
| | 570 | * cris/cris-opc.h: Regenerate. |
| | 571 | * cris/decodev10.c: Regenerate. |
| | 572 | * cris/decodev10.h: Regenerate. |
| | 573 | * cris/decodev32.c: Regenerate. |
| | 574 | * cris/decodev32.h: Regenerate. |
| | 575 | * cris/modelv10.c: Regenerate. |
| | 576 | * cris/modelv32.c: Regenerate. |
| | 577 | * cris/semcrisv10f-switch.c: Regenerate. |
| | 578 | * cris/semcrisv32f-switch.c: Regenerate. |
| | 579 | |
| | 580 | 2009-10-22 Tristan Gingold <gingold@adacore.com> |
| | 581 | |
| | 582 | * avr/interp.c (sim_stop): Return 1. |
| | 583 | |
| | 584 | 2009-10-16 Doug Evans <dje@sebabeach.org> |
| | 585 | |
| | 586 | * MAINTAINERS: Add myself as m32r maintainer. |
| | 587 | |
| | 588 | 2009-10-15 Michael Egaer <eager@eagercon.com> |
| | 589 | |
| | 590 | * MAINTAINERS: Add self as MicroBlaze maintainer. |
| | 591 | |
| | 592 | 2009-10-14 Ben Elliston <bje@gnu.org> |
| | 593 | |
| | 594 | * MAINTAINERS (common): Move myself to "past maintainers" section. |
| | 595 | |
| | 596 | 2009-10-06 Michael Eager <eager@eagercon.com> |
| | 597 | |
| | 598 | * microblaze/interp.c: Add include microblaze-dis.h. |
| | 599 | |
| | 600 | 2009-09-23 Michael Eager <eager@eagercon.com> |
| | 601 | |
| | 602 | * configure: Add microblaze-*.* (not regenerated). |
| | 603 | * configure.ac: Likewise. |
| | 604 | * microblaze/config.in: New. |
| | 605 | * microblaze/configure: Generate. |
| | 606 | * microblaze/configure.ac: New. |
| | 607 | * microblaze/interp.c: New. |
| | 608 | * microblaze/Makefile.in: New. |
| | 609 | * microblaze/microblaze.h: New. |
| | 610 | * microblaze/microblaze.isa: New. |
| | 611 | * microblaze/sim-main.h: New. |
| | 612 | * microblaze/sysdep.h: New. |
| | 613 | |
| | 614 | 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| | 615 | |
| | 616 | * avr/config.in: Regenerate. |
| | 617 | * avr/configure: Likewise. |
| | 618 | * configure: Likewise. |
| | 619 | * cris/config.in: Likewise. |
| | 620 | * cris/configure: Likewise. |
| | 621 | |
| | 622 | * configure.ac: m4_include toplevel config/override.m4. |
| | 623 | * configure: Regenerate. |
| | 624 | * avr/configure: Regenerate. |
| | 625 | * cris/configure: Regenerate. |
| | 626 | |
| | 627 | 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| | 628 | |
| | 629 | * Makefile.in (datarootdir): New variable. |
| | 630 | |
| | 631 | 2009-05-18 Jon Beniston <jon@beniston.com> |
| | 632 | |
| | 633 | * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim. |
| | 634 | * configure.ac: Add lm32 target. |
| | 635 | * lm32: New directory. |
| | 636 | |
| | 637 | 2009-05-11 Andrew Cagney <cagney@gnu.org> |
| | 638 | |
| | 639 | * MAINTAINERS: Orphan ppc. |
| | 640 | |
| | 641 | 2009-05-08 Kevin Buettner <kevinb@redhat.com> |
| | 642 | |
| | 643 | * m32c/gdb-if.c (m32c_signal_to_host): Rename to |
| | 644 | m32c_signal_to_target. Change signal return values from SIGILL, |
| | 645 | SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP, |
| | 646 | TARGET_SIGNAL_SEGV, etc. Fix all callers. |
| | 647 | |
| | 648 | 2009-04-30 Anthony Green <green@moxielogic.com> |
| | 649 | |
| | 650 | * MAINTAINERS: Add myself for the moxie port. |
| | 651 | * moxie: New directory. |
| | 652 | * configure.ac: Add entry for moxie. |
| | 653 | * configure: Regenerate. |
| | 654 | |
| | 655 | 2009-04-27 Tristan Gingold <gingold@adacore.com> |
| | 656 | |
| | 657 | * avr: New directory. |
| | 658 | * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files. |
| | 659 | * avr/config.in: New file, generated by autoheader. |
| | 660 | * avr/configure: New file generated by autoconf. |
| | 661 | * configure.ac: Add avr. |
| | 662 | * configure: Regenerated. |
| | 663 | |
| | 664 | 2009-04-17 Carlos O'Donell <carlos@codesourcery.com> |
| | 665 | |
| | 666 | * Makefile.in: Add dummy install-pdf, html, and |
| | 667 | install-html targets. |
| | 668 | |
| | 669 | 2009-01-18 Hans-Peter Nilsson <hp@axis.com> |
| | 670 | |
| | 671 | * cris/sim-if.c: Include errno.h. |
| | 672 | (cris_start_address, cris_program_offset): New variables. |
| | 673 | (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option |
| | 674 | enums. |
| | 675 | (cris_options): New options --cris-program-offset and |
| | 676 | --cris-start-address. |
| | 677 | (cris_option_handler): Handle new options. |
| | 678 | (cris_program_offset_write, cris_set_section_offset_iterator) |
| | 679 | (cris_offset_sections, cris_offset_sections): New functions. |
| | 680 | (sim_load): Use cris_program_offset_write as function argument to |
| | 681 | cris_load_elf_file, not sim_write. |
| | 682 | (struct offsetinfo): New struct. |
| | 683 | (cris_handle_interpreter): Fix typo in comment. |
| | 684 | (sim_open): Call cris_offset_sections as soon as the bfd of the |
| | 685 | infile is available. Gate bfd validity checks on abfd non-NULL. |
| | 686 | (sim_create_inferior): Let cris_start_address when != -1 override |
| | 687 | other start-address choices. |
| | 688 | |
| | 689 | 2009-01-06 Hans-Peter Nilsson <hp@axis.com> |
| | 690 | |
| | 691 | * cris/traps.c (abort): Define to call sim_io_error. |
| | 692 | (create_map): Make -1 imply a non-fixed address, not 0. All |
| | 693 | callers changed. Only prefer the next higher unmapped address if |
| | 694 | the last mapped address is no less than 0x40000000. Check that |
| | 695 | the address to be mapped is not already mapped. Update head |
| | 696 | comment. |
| | 697 | (unmap_pages): Don't call abort when recursive call fails, just |
| | 698 | note and return an error if a page in the range couldn't be unmapped. |
| | 699 | (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler) |
| | 700 | (schedule, make_first_thread, cris_pipe_empty): New local variable sd. |
| | 701 | (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle |
| | 702 | non-MAP_FIXED argument overlapping existing map. For MAP_FIXED, |
| | 703 | don't abort on page not being mapped. Handle non-anon filemap |
| | 704 | with length padded to pagesize. |
| | 705 | |
| | 706 | 2009-01-03 Hans-Peter Nilsson <hp@axis.com> |
| | 707 | |
| | 708 | * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT) |
| | 709 | (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE) |
| | 710 | (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID) |
| | 711 | (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP) |
| | 712 | (TARGET_AT_CLKTCK): Remove redundant macros. |
| | 713 | (AUX_ENT): Adjust to use standard ELF AT_* macros. |
| | 714 | (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all |
| | 715 | callers. |
| | 716 | (sim_open): Also pass AT_SECURE. |
| | 717 | |
| | 718 | * cris/sim-main.h (struct _sim_cpu): New member |
| | 719 | set_target_thread_data. |
| | 720 | * cris/crisv32f.c (CRIS_TLS_REGISTER): Define. |
| | 721 | * cris/crisv10f.c: Ditto. |
| | 722 | * cris/cris-tmpl.c (MY (set_target_thread_data)): New function. |
| | 723 | (MY (f_specific_init)): Set new _sim_cpu member to new function. |
| | 724 | * cris/traps.c (TARGET_SYS_set_thread_area): Define. |
| | 725 | (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New |
| | 726 | case. |
| | 727 | |
| | 728 | * cris/traps.c (TARGET_SYS_exit_group): Define. |
| | 729 | (cris_break_13_handler): Handle it like the exit for the last |
| | 730 | thread. |
| | 731 | |
| | 732 | * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01. |
| | 733 | (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment. |
| | 734 | (cris_break_13_handler) <case TARGET_SYS_uname>: Update to |
| | 735 | 2.6.27. Set machine field to the BFD printable name of the |
| | 736 | machine. |
| | 737 | |
| | 738 | * cris/traps.c (TARGET_MAP_DENYWRITE): Define. |
| | 739 | (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle |
| | 740 | TARGET_MAP_DENYWRITE. |
| | 741 | |
| | 742 | * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK) |
| | 743 | (TARGET_X_OK, TARGET_F_OK): Define. |
| | 744 | (cris_break_13_handler) <case TARGET_SYS_access>: New case. |
| | 745 | |
| | 746 | * cris/semcrisv32f-switch.c: Regenerate. |
| | 747 | |
| | 748 | 2008-12-30 Hans-Peter Nilsson <hp@axis.com> |
| | 749 | |
| | 750 | * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit |
| | 751 | just a short CRIS-specific notice. Tweak the wording for a |
| | 752 | failing architecture test. |
| | 753 | |
| | 754 | * cris/traps.c (TARGET_SYS_writev): New macro. |
| | 755 | (is_mapped_only, cris_dump_map): New functions. |
| | 756 | (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags |
| | 757 | and prot combinations and a non-zero page-offset. If |
| | 758 | TARGET_MAP_FIXED, unmap pages before mapping them. |
| | 759 | <case TARGET_SYS_mprotect>: When checking, allow any length |
| | 760 | argument. Don't actually do anything. |
| | 761 | <case TARGET_SYS_writev>: New case. |
| | 762 | |
| | 763 | * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o. |
| | 764 | * cris/sim-if.c: Include elf-bfd.h. |
| | 765 | (struct progbounds): New members end_loadmem, start_nonloadmem. |
| | 766 | (xprintf, eprintf): New functions, copied from common/sim-load.c. |
| | 767 | (cris_load_elf_file, sim_load, cris_get_progbounds): New functions. |
| | 768 | (get_progbounds_iterator): Renamed from get_progbounds. Make |
| | 769 | static. Update head comment. Set new struct progbounds members. |
| | 770 | (exec_load_addr, interp_load_addr, interp_start_addr): New static |
| | 771 | variables. |
| | 772 | (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base) |
| | 773 | (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New |
| | 774 | functions. |
| | 775 | (sim_open): New constant array auxv_entries. Rewrite AUX_ENT |
| | 776 | handling to use auxv_entries. Improve error message and checking |
| | 777 | for invalid programs. Use new variable abfd for the program |
| | 778 | instead of for each access reaching into sd to get it. |
| | 779 | (sim_create_inferior): If non-zero, use interp_start_addr instead |
| | 780 | of the program start address. |
| | 781 | (cris_disassemble_insn): Remove incorrect and unclear, supposedly |
| | 782 | stale comment. Always specify little-endian. |
| | 783 | |
| | 784 | 2008-07-29 Nick Clifton <nickc@redhat.com> |
| | 785 | |
| | 786 | * common/genmloop.sh: Add new parameter: -shell to specify the |
| | 787 | command interpreter to use to run the input file. This is |
| | 788 | necessary because otherwise SHELL is taken from the user's |
| | 789 | environment, and not from the makefile that invoked this script |
| | 790 | and the user might not be running an sh-like shell. |
| | 791 | * cris/Makefile.in: Pass -shell parameter to genmloop.sh. |
| | 792 | * fr30/Makefile.in: Likewise. |
| | 793 | * frv/Makefile.in: Likewise. |
| | 794 | * i960/Makefile.in: Likewise. |
| | 795 | * iq2000/Makefile.in: Likewise. |
| | 796 | * m32r/Makefile.in: Likewise. |
| | 797 | |
| | 798 | * frv/mloop.in: Add missing start of line comment marker. |
| | 799 | |
| | 800 | 2008-07-11 Hans-Peter Nilsson <hp@axis.com> |
| | 801 | |
| | 802 | * cris/configure: Regenerate to track ../common/common.m4 changes. |
| | 803 | * cris/config.in: Ditto. |
| | 804 | |
| | 805 | 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> |
| | 806 | Daniel Jacobowitz <dan@codesourcery.com> |
| | 807 | Joseph Myers <joseph@codesourcery.com> |
| | 808 | |
| | 809 | * cris/configure: Regenerate. |
| | 810 | |
| | 811 | 2008-05-09 Olivier Hainque <hainque@adacore.com> |
| | 812 | |
| | 813 | * ppc/altivec.igen (vperm): Latch inputs into temporaries. |
| | 814 | |
| | 815 | 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com> |
| | 816 | |
| | 817 | * MAINTAINERS: Add myself as maintainer of cr16 port. |
| | 818 | |
| | 819 | 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com> |
| | 820 | |
| | 821 | Add simulator for National cr16 processor. |
| | 822 | * cr16: New directory. |
| | 823 | * configure.ac: Add entry for National cr16. |
| | 824 | * configure: Regenerate. |
| | 825 | |
| | 826 | 2008-02-05 DJ Delorie <dj@redhat.com> |
| | 827 | |
| | 828 | * configure.ac (v850): V850 now has a testsuite. |
| | 829 | * configure (v850): Likewise. |
| | 830 | |
| | 831 | 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com> |
| | 832 | |
| | 833 | Updated copyright notices for most files. |
| | 834 | |
| | 835 | 2007-12-19 DJ Delorie <dj@redhat.com> |
| | 836 | |
| | 837 | * frv/frv.c (frvbf_cut): Only look at the six LSBs of |
| | 838 | cut_point. |
| | 839 | |
| | 840 | 2007-10-22 Hans-Peter Nilsson <hp@axis.com> |
| | 841 | |
| | 842 | * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c, |
| | 843 | cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c, |
| | 844 | cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c, |
| | 845 | cris/decodev10.h, cris/decodev32.c, cris/decodev32.h, |
| | 846 | cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c, |
| | 847 | cris/semcrisv32f-switch.c: Regenerate. |
| | 848 | |
| | 849 | 2007-08-24 Joel Brobecker <brobecker@adacore.com> |
| | 850 | |
| | 851 | Switch the license of all files explicitly copyright the FSF |
| | 852 | to GPLv3. |
| | 853 | |
| | 854 | 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com> |
| | 855 | |
| | 856 | * Makefile.in: Add dummy "pdf" target. |
| | 857 | |
| | 858 | 2007-02-20 Hans-Peter Nilsson <hp@axis.com> |
| | 859 | |
| | 860 | * cris/traps.c (dump_statistics): Change format for cycle numbers |
| | 861 | to %llu and cast parameters to unsigned long long. |
| | 862 | |
| | 863 | 2007-02-16 Thiemo Seufer <ths@mips.com> |
| | 864 | |
| | 865 | * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST. |
| | 866 | |
| | 867 | 2007-01-28 Manuel Lauss <slauss@resi.at> |
| | 868 | |
| | 869 | * configure.ac (sh64-*-*): Change to sh64*-*-*. |
| | 870 | (sh-*-*): Change to sh*-*-*. |
| | 871 | * configure: Regenerated. |
| | 872 | |
| | 873 | 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com> |
| | 874 | |
| | 875 | Updated copyright notices for most files. |
| | 876 | |
| | 877 | 2006-12-20 Hans-Peter Nilsson <hp@axis.com> |
| | 878 | |
| | 879 | * Makefile.in (autoconf-common autoheader-common): Only run |
| | 880 | autoheader on subdirs with a file config.in. |
| | 881 | |
| | 882 | * configure.ac (common): Make the default "yes" for all targets |
| | 883 | with sim subdirs. |
| | 884 | * configure: Regenerate. |
| | 885 | |
| | 886 | * Makefile.in (autoconf-common autoheader-common): In documented |
| | 887 | usage, say SHELL=/bin/sh. |
| | 888 | (.PHONY): Add autoheader-common. |
| | 889 | |
| | 890 | * MAINTAINERS: Add self as authorized committer for *. |
| | 891 | |
| | 892 | 2006-10-02 Edgar E. Iglesias <edgar@axis.com> |
| | 893 | Hans-Peter Nilsson <hp@axis.com> |
| | 894 | |
| | 895 | * cris/cris-sim.h (enum cris_unknown_syscall_action_type) |
| | 896 | (cris_unknown_syscall_action): Declare. |
| | 897 | * cris/sim-if.c (cris_unknown_syscall_action): Define. |
| | 898 | (cris_options): Add cris-unknown-syscall option. |
| | 899 | (cris_option_handler): Correct comment about and error message for |
| | 900 | invalid --cris-cycles argument. Handle --cris-unknown-syscall. |
| | 901 | * cris/traps.c: Include stdarg.h |
| | 902 | (cris_unknown_syscall): New function. |
| | 903 | (cris_break_13_handler): Instead of sim_io_eprintf and |
| | 904 | sim_engine_halt, call cris_unknown_syscall to handle more or less |
| | 905 | unknown syscalls. Adjust code as necessary to handle return |
| | 906 | value. |
| | 907 | |
| | 908 | 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com> |
| | 909 | |
| | 910 | * MAINTAINERS: Add Dave Brolley for sh64. |
| | 911 | |
| | 912 | 2006-09-30 Hans-Peter Nilsson <hp@axis.com> |
| | 913 | |
| | 914 | * cris/traps.c (TARGET_PIPE_BUF): New macro. |
| | 915 | (cris_pipe_empty): Correct initialization of "remaining". Only |
| | 916 | adjust the "write" return value if more than TARGET_PIPE_BUF bytes |
| | 917 | are written. |
| | 918 | |
| | 919 | 2006-09-29 Hans-Peter Nilsson <hp@axis.com> |
| | 920 | |
| | 921 | * cris/configure.ac: Check for limits.h and sys/param.h. |
| | 922 | * cris/configure, cris/config.in: Rebuild. |
| | 923 | * cris/traps.c (SIM_PATHMAX): New macro. |
| | 924 | (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN. |
| | 925 | |
| | 926 | 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com> |
| | 927 | |
| | 928 | * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator. |
| | 929 | * Makefile.in (FLAGS_TO_PASS): Include libdir. |
| | 930 | * configure: Regenerated. |
| | 931 | |
| | 932 | 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com> |
| | 933 | |
| | 934 | * cris/configure: Regenerated. |
| | 935 | |
| | 936 | 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com> |
| | 937 | |
| | 938 | * cris/configure: Regenerated. |
| | 939 | |
| | 940 | 2006-05-05 Andreas Schwab <schwab@suse.de> |
| | 941 | |
| | 942 | * configure.ac (CFLAGS_FOR_BUILD): Set and substitute. |
| | 943 | * configure: Regenerate. |
| | 944 | |
| | 945 | * Makefile.in (CFLAGS_FOR_BUILD): Define. |
| | 946 | (CC_FOR_BUILD): Don't override. |
| | 947 | (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD. |
| | 948 | |
| | 949 | 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com> |
| | 950 | |
| | 951 | * MAINTAINERS: Add an "Authorized committers" section, and list |
| | 952 | DJ Delorie for v850. |
| | 953 | |
| | 954 | 2006-04-08 Hans-Peter Nilsson <hp@axis.com> |
| | 955 | |
| | 956 | * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs. |
| | 957 | |
| | 958 | 2006-04-03 Hans-Peter Nilsson <hp@axis.com> |
| | 959 | |
| | 960 | * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files. |
| | 961 | * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting. |
| | 962 | (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules. |
| | 963 | (all): Depend on rvdummy$(EXEEXT). |
| | 964 | * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for |
| | 965 | sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE, |
| | 966 | default off. |
| | 967 | * cris/configure: Regenerate. |
| | 968 | * cris/cris-sim.h (cris_have_900000xxif): Declare here. |
| | 969 | (enum cris_interrupt_type, crisv10deliver_interrupt) |
| | 970 | (crisv32deliver_interrupt: New declarations. |
| | 971 | * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call |
| | 972 | sim_events_tickn and set state-events member work_pending when it's |
| | 973 | time for the next event. |
| | 974 | [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific |
| | 975 | interrupt-delivery function. |
| | 976 | * cris/crisv10f.c (MY (deliver_interrupt)): New function. |
| | 977 | * cris/crisv32f.c (MY (deliver_interrupt)): New function. |
| | 978 | * cris/devices.c: Include hw-device.h. |
| | 979 | (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer. |
| | 980 | (device_io_write_buffer): Only perform 0x900000xx-functions if |
| | 981 | cris_have_900000xxif is nonzero. Else if WITH_HW defined, |
| | 982 | call hw_io_write_buffer. Add return 0 last in function. |
| | 983 | * cris/sim-if.c (cris_have_900000xxif): Now global. |
| | 984 | (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member. |
| | 985 | Force "-model" option, effectively. |
| | 986 | * cris/sim-main.h (cris_interrupt_delivery_fn): New type. |
| | 987 | (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt. |
| | 988 | |
| | 989 | 2006-04-02 Hans-Peter Nilsson <hp@axis.com> |
| | 990 | |
| | 991 | * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o. |
| | 992 | (CRISV32F_OBJS): Remove semcrisv32f-switch.o. |
| | 993 | (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules. |
| | 994 | |
| | 995 | 2006-03-13 DJ Delorie <dj@redhat.com> |
| | 996 | |
| | 997 | * MAINTAINERS: Add self as m32c sim maintainer. |
| | 998 | |
| | 999 | 2006-02-23 Hans-Peter Nilsson <hp@axis.com> |
| | 1000 | |
| | 1001 | * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time |
| | 1002 | mapping. |
| | 1003 | (cris_break_13_handler) <case TARGET_SYS_time>: New case. |
| | 1004 | |
| | 1005 | 2006-01-23 Jim Blandy <jimb@redhat.com> |
| | 1006 | |
| | 1007 | Add simulator for Renesas M32C and M16C. |
| | 1008 | |
| | 1009 | * m32c: New directory. |
| | 1010 | * configure.ac: Add entry for Renesas M32C. |
| | 1011 | * configure: Regenerate. |
| | 1012 | |
| | 1013 | 2006-01-10 Hans-Peter Nilsson <hp@axis.com> |
| | 1014 | |
| | 1015 | * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic |
| | 1016 | cycle count for the current insn. |
| | 1017 | |
| | 1018 | 2005-12-06 Hans-Peter Nilsson <hp@axis.com> |
| | 1019 | |
| | 1020 | * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h, |
| | 1021 | cris/decodev10.c, cris/decodev10.h, cris/decodev32.c, |
| | 1022 | cris/decodev32.h, cris/modelv10.c, cris/modelv32.c, |
| | 1023 | cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate. |
| | 1024 | |
| | 1025 | 2005-12-05 Hans-Peter Nilsson <hp@axis.com> |
| | 1026 | |
| | 1027 | * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c, |
| | 1028 | cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c, |
| | 1029 | cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c, |
| | 1030 | cris/decodev10.h, cris/decodev32.c, cris/decodev32.h, |
| | 1031 | cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c, |
| | 1032 | cris/semcrisv32f-switch.c: Regenerate. |
| | 1033 | |
| | 1034 | 2005-11-20 Hans-Peter Nilsson <hp@axis.com> |
| | 1035 | |
| | 1036 | * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define. |
| | 1037 | (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and |
| | 1038 | TARGET_O_WRONLY. |
| | 1039 | (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for |
| | 1040 | F_GETFL on fd 0, 1 and 2. |
| | 1041 | |
| | 1042 | 2005-11-17 Hans-Peter Nilsson <hp@axis.com> |
| | 1043 | |
| | 1044 | * cris/sim-main.h (struct _sim_cpu): New members last_syscall, |
| | 1045 | last_open_fd, last_open_flags. |
| | 1046 | * cris/traps.c: Don't include targ-vals.h. |
| | 1047 | (TARGET_O_ACCMODE): Define. |
| | 1048 | (cris_break_13_handler): Set new _sim_cpu members. |
| | 1049 | <case TARGET_SYS_fcntl>: Support special case of F_GETFL. |
| | 1050 | Rearrange code as switch. Emit "unimplemented" abort for |
| | 1051 | unimplemented fcntl calls. |
| | 1052 | |
| | 1053 | * cris/traps.c (TARGET_SYS_stat): Define. |
| | 1054 | (syscall_stat32_map): Add entry for TARGET_SYS_stat. |
| | 1055 | (cris_break_13_handler) <case TARGET_SYS_stat>: New case. |
| | 1056 | |
| | 1057 | 2005-11-16 Hans-Peter Nilsson <hp@axis.com> |
| | 1058 | |
| | 1059 | * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the |
| | 1060 | low 32 bits are used after an unsigned long cast. |
| | 1061 | |
| | 1062 | 2005-05-28 Hans-Peter Nilsson <hp@axis.com> |
| | 1063 | |
| | 1064 | * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop. |
| | 1065 | |
| | 1066 | 2005-05-26 Chris Demetriou <cgd@netbsd.org> |
| | 1067 | |
| | 1068 | * MAINTAINERS: Update my mail address, move myself to the |
| | 1069 | "Past maintainers" section. |
| | 1070 | |
| | 1071 | 2005-05-17 Corinna Vinschen <vinschen@redhat.com> |
| | 1072 | |
| | 1073 | * configure.ac: Add igen to v850 build. |
| | 1074 | * configure: Regenerate. |
| | 1075 | |
| | 1076 | 2005-04-29 Paul Brook <paul@codesourcery.com> |
| | 1077 | |
| | 1078 | * common/callback.c (PIPE_BUF): Provide default definition. |
| | 1079 | (os_lstat): Use stat if lstat is not available on the host. |
| | 1080 | (os_ftruncate): Return EINVAL if not available on the host. |
| | 1081 | (os_truncate): Ditto. |
| | 1082 | * common/configure.ac: Check for lstat, truncate and ftruncate. |
| | 1083 | * common/configure: Regenerate. |
| | 1084 | * common/config.in: Regenerate. |
| | 1085 | |
| | 1086 | 2005-04-27 Paul Brook <paul@codesourcery.com> |
| | 1087 | |
| | 1088 | * common/Make-common.in: Add $(EXEEXT) to "run". |
| | 1089 | |
| | 1090 | 2005-04-18 Hans-Peter Nilsson <hp@axis.com> |
| | 1091 | |
| | 1092 | * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>: |
| | 1093 | For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't |
| | 1094 | implemented. In call to create_map, pad length argument to 8k. |
| | 1095 | |
| | 1096 | 2005-04-15 Corinna Vinschen <vinschen@redhat.com> |
| | 1097 | |
| | 1098 | * configure.ac: Add explicit sh64 case. |
| | 1099 | * configure: Regenerate. |
| | 1100 | |
| | 1101 | 2005-03-30 Paul Brook <paul@codesourcery.com> |
| | 1102 | |
| | 1103 | * arm/wrapper.c: Provide SIGTRAP and SIGBUS. |
| | 1104 | |
| | 1105 | 2005-03-24 Hans-Peter Nilsson <hp@axis.com> |
| | 1106 | |
| | 1107 | * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to |
| | 1108 | include cgen-ops.h in decodev10.c and decodev32.c. |
| | 1109 | * cris/sim-main.h: Don't include cgen-ops.h here. |
| | 1110 | * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c, |
| | 1111 | cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c, |
| | 1112 | cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c, |
| | 1113 | cris/decodev10.h, cris/decodev32.c, cris/decodev32.h, |
| | 1114 | cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c, |
| | 1115 | cris/semcrisv32f-switch.c: Regenerate. |
| | 1116 | |
| | 1117 | * cris/traps.c (cris_break_13_handler) <case |
| | 1118 | TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags, |
| | 1119 | sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc. |
| | 1120 | |
| | 1121 | 2005-03-23 Mark Kettenis <kettenis@gnu.org> |
| | 1122 | |
| | 1123 | * cris/configure: Regenerate. |
| | 1124 | |
| | 1125 | 2005-02-28 Jim Blandy <jimb@redhat.com> |
| | 1126 | |
| | 1127 | * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac, |
| | 1128 | mips/configure.ac, mn10300/configure.ac, v850/configure.ac: |
| | 1129 | Regenerated, after change to common/aclocal.m4. |
| | 1130 | |
| | 1131 | 2005-02-18 Corinna Vinschen <vinschen@redhat.com> |
| | 1132 | |
| | 1133 | * iq2000: New target subdirectory. |
| | 1134 | * configure.ac: Add iq2000 target. |
| | 1135 | * configure: Regenerate. |
| | 1136 | |
| | 1137 | 2005-01-29 Hans-Peter Nilsson <hp@axis.com> |
| | 1138 | |
| | 1139 | * Makefile.in (all, clean mostlyclean, distclean maintainer-clean) |
| | 1140 | (realclean, install): Fail if subdir make failed. |
| | 1141 | |
| | 1142 | 2005-01-28 Hans-Peter Nilsson <hp@axis.com> |
| | 1143 | |
| | 1144 | * cris: New directory, simulator for Axis Communications CRIS |
| | 1145 | including CRIS v32, CGEN-based. |
| | 1146 | * configure.ac: Add corresponding configury. |
| | 1147 | * configure: Regenerate. |
| | 1148 | |
| | 1149 | 2005-01-17 Andrew Cagney <cagney@gnu.org> |
| | 1150 | |
| | 1151 | * configure.ac: For mips*-*-* and mn10300*-*-* configure the |
| | 1152 | common directory. Remove sparc*-*-* from list. |
| | 1153 | |
| | 1154 | 2005-01-11 Andrew Cagney <cagney@gnu.org> |
| | 1155 | |
| | 1156 | * Makefile.in (autoconf-common autoheader-common): Add --force to |
| | 1157 | autoconf and autoheader. |
| | 1158 | (autoconf-common autoheader-common) |
| | 1159 | (autoconf-install autoheader-install): Check for configure.ac, not |
| | 1160 | configure.in. |
| | 1161 | * configure.ac: Delete AC_CONFIG_AUX_DIR. |
| | 1162 | * configure: Re-generate. |
| | 1163 | |
| | 1164 | 2005-01-07 Andrew Cagney <cagney@gnu.org> |
| | 1165 | |
| | 1166 | * configure.ac: Replace configure.in. Requires autoconf 2.59 and |
| | 1167 | correctly calls AC_CONFIG_SUBDIRS. |
| | 1168 | * configure: Re-generate. |
| | 1169 | |
| | 1170 | 2004-12-01 Andrew Cagney <cagney@gnu.org> |
| | 1171 | |
| | 1172 | * i960, h8500: Delete directory. |
| | 1173 | |
| | 1174 | 2004-11-12 Andrew Cagney <cagney@gnu.org> |
| | 1175 | |
| | 1176 | * d30v, fr30, mn10200, z8k: Delete directory. |
| | 1177 | |
| | 1178 | 2004-03-10 Ben Elliston <bje@gnu.org> |
| | 1179 | |
| | 1180 | * MAINTAINERS: Update my mail address. |
| | 1181 | |
| | 1182 | 2004-01-26 Chris Demetriou <cgd@broadcom.com> |
| | 1183 | |
| | 1184 | * configure.in (mips*-*-*): Configure in testsuite. |
| | 1185 | * configure: Regenerate. |
| | 1186 | |
| | 1187 | 2003-10-08 Dave Brolley <brolley@redhat.com> |
| | 1188 | |
| | 1189 | * configure.in: Move frv handling to alphabetically correct placement. |
| | 1190 | |
| | 1191 | 2003-09-03 Andreas Schwab <schwab@suse.de> |
| | 1192 | |
| | 1193 | * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir). |
| | 1194 | |
| | 1195 | 2003-08-29 Dave Brolley <brolley@redhat.com> |
| | 1196 | |
| | 1197 | * MAINTAINERS: Add myself as maintainer of the FRV port. |
| | 1198 | |
| | 1199 | 2003-08-20 Michael Snyder <msnyder@redhat.com> |
| | 1200 | Dave Brolley <brolley@redhat.com> |
| | 1201 | |
| | 1202 | * frv/: New directory, simulator for the Fujitsu FRV. |
| | 1203 | * configure.in: Add frv configury. |
| | 1204 | * configure: Regenerate. |
| | 1205 | |
| | 1206 | 2003-08-10 Ben Elliston <bje@wasabisystems.com> |
| | 1207 | |
| | 1208 | * MAINTAINERS: Update my mail address. |
| | 1209 | |
| | 1210 | 2003-08-09 Andrew Cagney <cagney@redhat.com> |
| | 1211 | |
| | 1212 | * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop |
| | 1213 | maintenance. List igen and sh maintainers. Mention that target |
| | 1214 | and global maintainers pick up the slack. |
| | 1215 | |
| | 1216 | 2003-07-09 Michael Snyder <msnyder@redhat.com> |
| | 1217 | |
| | 1218 | * configure.in: Add testsuite to extra_subdirs for sh. |
| | 1219 | * configure: Regenerate. |
| | 1220 | |
| | 1221 | 2003-01-23 Nick Clifton <nickc@redhat.com> |
| | 1222 | |
| | 1223 | * Add sh2e support: |
| | 1224 | |
| | 1225 | 2002-04-02 Alexandre Oliva <aoliva@redhat.com> |
| | 1226 | |
| | 1227 | * sh/gencode.c: Replace sh3e with sh2e except in fsqrt. |
| | 1228 | |
| | 1229 | 2002-08-24 Geoffrey Keating <geoffk@redhat.com> |
| | 1230 | |
| | 1231 | * MAINTAINERS: Update my email address. |
| | 1232 | |
| | 1233 | 2002-07-17 Andrew Cagney <ac131313@redhat.com> |
| | 1234 | |
| | 1235 | * w65/: Delete directory. |
| | 1236 | |
| | 1237 | 2002-07-16 Andrew Cagney <ac131313@redhat.com> |
| | 1238 | |
| | 1239 | * configure.in (extra_subdirs): Mark fr30-*-* as obsolete. |
| | 1240 | * configure: Re-generate. |
| | 1241 | |
| | 1242 | 2002-07-13 Andrew Cagney <ac131313@redhat.com> |
| | 1243 | |
| | 1244 | * configure.in (extra_subdirs): Mark d30v-*-* as obsolete. |
| | 1245 | * configure: Re-generate. |
| | 1246 | |
| | 1247 | 2002-06-16 Andrew Cagney <ac131313@redhat.com> |
| | 1248 | |
| | 1249 | * Makefile.in (autoconf-changelog autoheader-changelog): Let name, |
| | 1250 | id, date and host to be overriden by NAME, ID, DATE and HOST |
| | 1251 | respectfully. Use ISO dates. |
| | 1252 | |
| | 1253 | Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com> |
| | 1254 | |
| | 1255 | * Makefile.in (ChangeLog): New makefile variable. |
| | 1256 | * README-HACKING: Mention the ChangeLog makefile variable. |
| | 1257 | |
| | 1258 | 2002-06-01 Andrew Cagney <ac131313@redhat.com> |
| | 1259 | |
| | 1260 | * tic80/: Delete directory. |
| | 1261 | |
| | 1262 | 2002-05-16 Stephane Carrez <stcarrez@nerim.fr> |
| | 1263 | |
| | 1264 | * MAINTAINERS: Update my email address. |
| | 1265 | |
| | 1266 | 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| | 1267 | |
| | 1268 | * MAINTAINERS: Record self as maintainer of m68hc11 simulator. |
| | 1269 | |
| | 1270 | 2002-03-01 Frank Ch. Eigler <fche@redhat.com> |
| | 1271 | |
| | 1272 | * MAINTAINERS: Record self as a co-maintainer of just common/. |
| | 1273 | |
| | 1274 | 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com> |
| | 1275 | |
| | 1276 | * MAINTAINERS: Point to GDB files describing overall maintaince |
| | 1277 | and check-in procedures. |
| | 1278 | |
| | 1279 | 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com> |
| | 1280 | |
| | 1281 | * MAINTAINERS: Add myself for ARM portions. |
| | 1282 | |
| | 1283 | 2001-10-19 Andrew Cagney <ac131313@redhat.com> |
| | 1284 | |
| | 1285 | * configure.in: When Linux or NetBSD, enable PowerPC simulator. |
| | 1286 | * configure: Re-generate. |
| | 1287 | |
| | 1288 | 2001-02-16 Ben Elliston <bje@redhat.com> |
| | 1289 | |
| | 1290 | * MAINTAINERS: Add myself for common portions. |
| | 1291 | |
| | 1292 | 2001-01-15 Chris Demetriou <cgd@broadcom.com> |
| | 1293 | |
| | 1294 | * MAINTAINERS: Added self and Andrew for the mips sim. |
| | 1295 | |
| | 1296 | 2000-10-25 Geoff Keating <geoffk@cygnus.com> |
| | 1297 | |
| | 1298 | * MAINTAINERS: Added self and Andrew for the ppc sim. |
| | 1299 | |
| | 1300 | Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| | 1301 | |
| | 1302 | From Stephane Carrez <Stephane.Carrez@worldnet.fr>: |
| | 1303 | * m68hc11: New directory. |
| | 1304 | * configure.in: Add. |
| | 1305 | * configure: Regenerate. |
| | 1306 | |
| | 1307 | Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| | 1308 | |
| | 1309 | * tic80: New directory. |
| | 1310 | * configure.in: Add configury. |
| | 1311 | * configure: Regenerate. |
| | 1312 | |
| | 1313 | 2000-04-20 Nick Clifton <nickc@cygnus.com> |
| | 1314 | |
| | 1315 | * configure.in (extra_subdirs): Add testsuite to strongarm |
| | 1316 | directories. |
| | 1317 | * configure: Regenerate. |
| | 1318 | |
| | 1319 | Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| | 1320 | |
| | 1321 | * MAINTAINERS: New file. Blank. |
| | 1322 | |
| | 1323 | 1999-11-18 Ben Elliston <bje@cygnus.com> |
| | 1324 | |
| | 1325 | * configure.in: Require autoconf 2.13 and remove obsolete |
| | 1326 | invocation of AC_C_CROSS. |
| | 1327 | * configure: Regenerate. |
| | 1328 | |
| | 1329 | 1999-09-29 Doug Evans <devans@casey.cygnus.com> |
| | 1330 | |
| | 1331 | * configure.in: Configure the testsuite directory for thumb. |
| | 1332 | * configure: Regenerate. |
| | 1333 | |
| | 1334 | 1999-07-16 Ben Elliston <bje@cygnus.com> |
| | 1335 | |
| | 1336 | * configure.in: Configure the testsuite directory for arm. |
| | 1337 | * configure: Regenerate. |
| | 1338 | |
| | 1339 | 1999-04-08 Nick Clifton <nickc@cygnus.com> |
| | 1340 | |
| | 1341 | * configure.in: Add support for MCore target. |
| | 1342 | * configure: Regenerate. |
| | 1343 | |
| | 1344 | 1999-03-14 Stan Shebs <shebs@andros.cygnus.com> |
| | 1345 | |
| | 1346 | * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove |
| | 1347 | RUNTEST instead of commenting out, fixes portability problem. |
| | 1348 | |
| | 1349 | 1999-02-08 Nick Clifton <nickc@cygnus.com> |
| | 1350 | |
| | 1351 | * configure.in: Add support for StrongARM target. |
| | 1352 | * configure: Regenerate. |
| | 1353 | |
| | 1354 | 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com) |
| | 1355 | |
| | 1356 | * configure.in: Require autoconf 2.12.1 or higher. |
| | 1357 | |
| | 1358 | 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com> |
| | 1359 | |
| | 1360 | * configure.in (i960-*-*): Add. |
| | 1361 | * configure: Rebuild. |
| | 1362 | |
| | 1363 | Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com> |
| | 1364 | |
| | 1365 | * configure.in: Added case for fr30-*-*. |
| | 1366 | * configure: Regenerated. |
| | 1367 | |
| | 1368 | Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com> |
| | 1369 | |
| | 1370 | * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program |
| | 1371 | to allow successful operation on Windows. |
| | 1372 | |
| | 1373 | Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com> |
| | 1374 | |
| | 1375 | * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make |
| | 1376 | check can be invoked recursively. |
| | 1377 | |
| | 1378 | Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com> |
| | 1379 | |
| | 1380 | * configure.in: Build simulator on sparclite and sparc86x targets. |
| | 1381 | * configure: Regenerate. |
| | 1382 | |
| | 1383 | Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com> |
| | 1384 | |
| | 1385 | * Makefile.in (autoconf-common autoheader-common): Don't pass -l |
| | 1386 | to autoconf and autoheader. |
| | 1387 | |
| | 1388 | Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com> |
| | 1389 | |
| | 1390 | * Makefile.in (autoconf-common autoheader-common): Pass `-l |
| | 1391 | ../common' to autoconf and autoheader. Unconditionally run |
| | 1392 | autoconf in every subdir. |
| | 1393 | (autoconf-changelog autoheader-changelog): Unconditionally run |
| | 1394 | commands in every subdir. |
| | 1395 | (autoconf-install autoheader-install): Likewise. |
| | 1396 | |
| | 1397 | Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk> |
| | 1398 | |
| | 1399 | * Makefile.in: Get SHELL from configure. |
| | 1400 | * (FLAGS_TO_PASS): Pass down SHELL. |
| | 1401 | * configure: Regenerate with autoconf 2.12.1 to fix shell issues for |
| | 1402 | NT native builds. |
| | 1403 | |
| | 1404 | Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com> |
| | 1405 | |
| | 1406 | * configure.in (extra_subdirs): Enable igen for mn10300. |
| | 1407 | * configure: Re-generate. |
| | 1408 | |
| | 1409 | Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com> |
| | 1410 | |
| | 1411 | * configure.in (extra_subdirs): Add support for thumb target. |
| | 1412 | |
| | 1413 | * configure (extra_subdirs): Add support for thumb target. |
| | 1414 | |
| | 1415 | Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| | 1416 | |
| | 1417 | * configure.in (extra_subdirs): Add IGEN directory when MIPS |
| | 1418 | target. |
| | 1419 | * configure: Regenerate. |
| | 1420 | |
| | 1421 | Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| | 1422 | |
| | 1423 | * configure.in (extra_subdirs): v850ea needs igen. |
| | 1424 | * configure: Re-generate. |
| | 1425 | |
| | 1426 | Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| | 1427 | |
| | 1428 | * configure.in (testdir): When a testsuite directory, add that to |
| | 1429 | the list of confdirs. |
| | 1430 | |
| | 1431 | Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| | 1432 | |
| | 1433 | * configure.in (extra_subdirs): Enable igen ready for V850. |
| | 1434 | |
| | 1435 | Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| | 1436 | |
| | 1437 | * configure.in (w65-*-*, only_if_enabled): Set. |
| | 1438 | * configure: Re-generate. |
| | 1439 | |
| | 1440 | Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| | 1441 | |
| | 1442 | * configure.in (sparc*-*-*, only_if_enabled): Set |
| | 1443 | only_if_enabled=yes. Check only_if_enabled before enabling a |
| | 1444 | simulator. |
| | 1445 | * configure: Regenerate. |
| | 1446 | |
| | 1447 | Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com> |
| | 1448 | |
| | 1449 | * configure.in (extra_subdirs): Add v850e target. |
| | 1450 | |
| | 1451 | Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com> |
| | 1452 | |
| | 1453 | * configure.in (extra_subdirs): Add v850ea target. |
| | 1454 | |
| | 1455 | Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com> |
| | 1456 | |
| | 1457 | * configure.in (sparc*-*-*): Don't build erc32. |
| | 1458 | * configure: Regenerate. |
| | 1459 | |
| | 1460 | Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com> |
| | 1461 | |
| | 1462 | * configure.in (m32r-*-*): New target. |
| | 1463 | * configure: Regenerate. |
| | 1464 | |
| | 1465 | * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@. |
| | 1466 | |
| | 1467 | Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| | 1468 | |
| | 1469 | * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make |
| | 1470 | thought that .NOEXPORT was the default target. |
| | 1471 | |
| | 1472 | Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com> |
| | 1473 | |
| | 1474 | * Makefile.in (clean mostlyclean): Restore targets accidentally |
| | 1475 | deleted in earlier change. |
| | 1476 | |
| | 1477 | Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| | 1478 | |
| | 1479 | * Makefile.in (autoheader-common, autoheader-changelog, |
| | 1480 | autoheader-install): Perform autoheader in addition to autoconf. |
| | 1481 | |
| | 1482 | Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com> |
| | 1483 | |
| | 1484 | * Makefile.in (autoconf-install): New target. |
| | 1485 | (autoconf-changelog): Try different way to obtain user name. |
| | 1486 | |
| | 1487 | Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| | 1488 | |
| | 1489 | * Makefile.in (autoconf-changelog): New target, update |
| | 1490 | ChangeLog for all subdirectories - normally used after |
| | 1491 | autoconf-common target. |
| | 1492 | |
| | 1493 | Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| | 1494 | |
| | 1495 | * configure.in (extra_subdirs): Include testsuite for d30v. |
| | 1496 | * configure: Regenerate. |
| | 1497 | |
| | 1498 | * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from |
| | 1499 | ../gdb/Makefile.in |
| | 1500 | (check): New rules - drive the testsuite. |
| | 1501 | |
| | 1502 | Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com) |
| | 1503 | |
| | 1504 | * configure.in: Add mn10200 configure lines accidentally |
| | 1505 | removed. |
| | 1506 | * configure: Regenerated. |
| | 1507 | |
| | 1508 | Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com> |
| | 1509 | |
| | 1510 | * configure.in (extra_subdirs): Generalize common sub directory |
| | 1511 | into a list. |
| | 1512 | (extra_subdirs): For d30v add igen to the list to be built. |
| | 1513 | |
| | 1514 | Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com> |
| | 1515 | |
| | 1516 | * configure.in (d30v): New target. |
| | 1517 | * configure: Regenerated. |
| | 1518 | |
| | 1519 | Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com) |
| | 1520 | |
| | 1521 | * configure.in: Don't require GCC to build the mn10200 |
| | 1522 | simulator anymore. |
| | 1523 | * configure: Rebuilt. |
| | 1524 | |
| | 1525 | Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com> |
| | 1526 | |
| | 1527 | * configure.in: Don't configure any subdirs if no simulator |
| | 1528 | is being built. Don't use erc32 for sparc64. |
| | 1529 | * configure: Regenerated. |
| | 1530 | |
| | 1531 | Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com> |
| | 1532 | |
| | 1533 | * Makefile.in (autoconf-common): New target. |
| | 1534 | * configure.in: Do configure common. |
| | 1535 | * configure: Regenerated. |
| | 1536 | |
| | 1537 | Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com) |
| | 1538 | |
| | 1539 | * configure configure.in: Don't configure common anymore. Files |
| | 1540 | from common are now built in the individual simualtor directories. |
| | 1541 | This fixes problems with the WinGDB build procedure. |
| | 1542 | |
| | 1543 | Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com) |
| | 1544 | |
| | 1545 | * configure: Enable the mn10200 simulator. |
| | 1546 | |
| | 1547 | Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com> |
| | 1548 | |
| | 1549 | * configure.in (configdirs): Add common. |
| | 1550 | * configure: Regenerated. |
| | 1551 | |
| | 1552 | Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| | 1553 | |
| | 1554 | * configure.in (powerpc*-*-linux*): Treat like the other powerpc |
| | 1555 | system V based targets. |
| | 1556 | * configure: Regenerate. |
| | 1557 | |
| | 1558 | Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com> |
| | 1559 | |
| | 1560 | * configure.in (--enable-sim-powerpc): Delete. |
| | 1561 | (--enable-sim): Add. |
| | 1562 | * configure: Regenerated. |
| | 1563 | |
| | 1564 | Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com) |
| | 1565 | |
| | 1566 | * configure.in: Only build the V850 simulator if |
| | 1567 | we are using gcc. |
| | 1568 | * configure: Rebuild. |
| | 1569 | |
| | 1570 | Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com> |
| | 1571 | |
| | 1572 | * configure.in: Do build erc32 for DOS and Windows hosts. |
| | 1573 | * configure: Rebuild. |
| | 1574 | |
| | 1575 | Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com) |
| | 1576 | |
| | 1577 | * Makefile.in erc32/Makefile.in: Don't set srcroot. This should |
| | 1578 | be inherited from the parent. Remove INSTALL_XFORM and |
| | 1579 | INSTALL_XFORM1. Make INSTALL be set from configure. |
| | 1580 | |
| | 1581 | Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com> |
| | 1582 | |
| | 1583 | * configure.in: Only build the MIPS simulator if we are using |
| | 1584 | gcc. |
| | 1585 | * configure: Rebuild. |
| | 1586 | |
| | 1587 | Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com) |
| | 1588 | |
| | 1589 | * configure.in (v850-*-*): Added V850 simulator. |
| | 1590 | |
| | 1591 | Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| | 1592 | |
| | 1593 | * configure.in (d10v-*-*): Added D10V simulator. |
| | 1594 | |
| | 1595 | Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) |
| | 1596 | |
| | 1597 | * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir, |
| | 1598 | INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values. |
| | 1599 | (docdir): Removed. |
| | 1600 | * configure.in (AC_PREREQ): autoconf 2.5 or higher. |
| | 1601 | (AC_PROG_INSTALL): Added. |
| | 1602 | * configure: Rebuilt. |
| | 1603 | |
| | 1604 | Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com> |
| | 1605 | |
| | 1606 | * configure.in: Only configure erc32 if using gcc. |
| | 1607 | * configure: Rebuild. |
| | 1608 | |
| | 1609 | Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| | 1610 | |
| | 1611 | * configure.in (sim_target): Build PowerPC simulator for powerpc |
| | 1612 | System V.4, Solaris, and Elf targets. |
| | 1613 | * configure: Regenerate with autoconf 2.10. |
| | 1614 | |
| | 1615 | Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll> |
| | 1616 | |
| | 1617 | * configure.in: Only built erc32 simulator on Unix hosts as it |
| | 1618 | uses pseudo ttys. |
| | 1619 | * configure: Regenerated with autoconf 2.8. |
| | 1620 | |
| | 1621 | Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| | 1622 | |
| | 1623 | * erc32: Sparc simulator from the ESA. |
| | 1624 | |
| | 1625 | Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com> |
| | 1626 | |
| | 1627 | From: Miles Bader <miles@gnu.ai.mit.edu> |
| | 1628 | * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB. |
| | 1629 | * configure: Regenerate using autoconf. |
| | 1630 | |
| | 1631 | Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| | 1632 | |
| | 1633 | * Makefile.in (install): Fix typo. |
| | 1634 | |
| | 1635 | Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com> |
| | 1636 | |
| | 1637 | * configure: Regenerate with autoconf 2.7. |
| | 1638 | |
| | 1639 | * Makefile.in (all): Simplify. |
| | 1640 | (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop |
| | 1641 | as in the all target. |
| | 1642 | (distclean, maintainer-clean, realclean): Likewise. |
| | 1643 | (install): Likewise. |
| | 1644 | |
| | 1645 | Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com> |
| | 1646 | |
| | 1647 | * Makefile.in (all): Remove extra '\' char from shell script. |
| | 1648 | |
| | 1649 | Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com> |
| | 1650 | |
| | 1651 | * Makefile.in (all): Avoid a for loop with zero elements, even if |
| | 1652 | the loop will not be executed because of an if statement. |
| | 1653 | |
| | 1654 | Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com> |
| | 1655 | |
| | 1656 | * Makefile.in (install): Add missing semicolon in "fi \". |
| | 1657 | |
| | 1658 | Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| | 1659 | |
| | 1660 | * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up |
| | 1661 | defaults from configure. |
| | 1662 | |
| | 1663 | * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using |
| | 1664 | configure defaults. |
| | 1665 | (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets |
| | 1666 | if either --enable-sim-powerpc is used, or the host compiler is |
| | 1667 | GCC. |
| | 1668 | |
| | 1669 | Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk> |
| | 1670 | |
| | 1671 | * configure.in (mips*-*-*): Added "mips" simulator target. |
| | 1672 | * configure: Re-generated. |
| | 1673 | |
| | 1674 | Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com> |
| | 1675 | |
| | 1676 | * Makefile.in (BISON): Remove macro. |
| | 1677 | (FLAGS_TO_PASS): Remove BISON. |
| | 1678 | |
| | 1679 | Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| | 1680 | |
| | 1681 | * configure.in: Explicitly `exit 0' for broken shells. |
| | 1682 | * configure: Rebuilt. |
| | 1683 | |
| | 1684 | Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com> |
| | 1685 | |
| | 1686 | * common/run.c (main): Initialize the callbacks. |
| | 1687 | |
| | 1688 | Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com> |
| | 1689 | |
| | 1690 | * Makefile.in (maintainer-clean): New synonym for realclean. |
| | 1691 | |
| | 1692 | Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| | 1693 | |
| | 1694 | * configure.in (powerpc*-*-eabisim*): Only build the simulator if |
| | 1695 | the target is powerpc*-*-eabisim*, since it requires GCC to build. |
| | 1696 | |
| | 1697 | Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| | 1698 | |
| | 1699 | * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney |
| | 1700 | <cagney@highland.com.au>. |
| | 1701 | * configure: Regnerate from configure.in. |
| | 1702 | |
| | 1703 | Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com> |
| | 1704 | |
| | 1705 | * Update all FSF addresses except those in COPYING* files. |
| | 1706 | |
| | 1707 | Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com> |
| | 1708 | |
| | 1709 | * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass |
| | 1710 | submakes either default or passed in value. |
| | 1711 | |
| | 1712 | Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| | 1713 | |
| | 1714 | * Makefile.in (all, clean, distclean, mostlyclean, realclean, |
| | 1715 | install): Changed targets so that they descend all |
| | 1716 | subdirectories in $(SUBDIRS). |
| | 1717 | (*-all, *-clean, *-install): Removed targets. |
| | 1718 | |
| | 1719 | * configure.in: Don't bother with target makefile fragments, they |
| | 1720 | are no longer needed. |
| | 1721 | * configure: regenerated. |
| | 1722 | |
| | 1723 | * Makefile.in, configure.in: converted to autoconf. |
| | 1724 | * configure: New file, generated with autconf 2.4. |
| | 1725 | |
| | 1726 | Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com> |
| | 1727 | |
| | 1728 | * Makefile.in: Support ARM. |
| | 1729 | * configure.in: Ditto. |
| | 1730 | |
| | 1731 | Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat> |
| | 1732 | |
| | 1733 | * Makefile.in: Support W65. |
| | 1734 | * configure.in: Ditto. |
| | 1735 | |
| | 1736 | Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com) |
| | 1737 | |
| | 1738 | * Makefile.in: Add TAGS target. |
| | 1739 | |
| | 1740 | Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| | 1741 | |
| | 1742 | * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300, |
| | 1743 | install-h8300, clean-h8300, all-h8500, install-h8500, |
| | 1744 | clean-h8500, all-sh, install-sh, clean-sh): do not echo |
| | 1745 | recursion lines. |
| | 1746 | |
| | 1747 | Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com) |
| | 1748 | |
| | 1749 | * Makefile.in: remove endian.h trace from h8500 |
| | 1750 | |
| | 1751 | Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com) |
| | 1752 | |
| | 1753 | * Makefile.in: Add distclean, realclean, and mostlyclean targets. |
| | 1754 | |
| | 1755 | Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| | 1756 | |
| | 1757 | * Makefile.in: make all of the all-* target (except all-nothing) |
| | 1758 | depend on endian.h, so that if we're not building a simulator, we |
| | 1759 | don't built endian |
| | 1760 | |
| | 1761 | Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com) |
| | 1762 | |
| | 1763 | * Makefile.in (check, installcheck): Added dummy targets. |
| | 1764 | |
| | 1765 | Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com) |
| | 1766 | |
| | 1767 | * Makefile.in (endian): Find endian.c in $(srcdir), and also |
| | 1768 | explicitly make it, since some makes apparently don't work with |
| | 1769 | VPATH and .c to executable rules (SunOS make for example). |
| | 1770 | |
| | 1771 | Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| | 1772 | |
| | 1773 | * Makefile.in (endian): Add explicit rule for broken makes. |
| | 1774 | |
| | 1775 | Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com) |
| | 1776 | |
| | 1777 | * Makefile.in (info, install-info): New targets. |
| | 1778 | (DO_INSTALL): Renamed from INSTALL, which is overridden by the top |
| | 1779 | level Makefile. |
| | 1780 | |
| | 1781 | Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com) |
| | 1782 | |
| | 1783 | * Makefile.in (endian.h): build endian.h via a temporary file so |
| | 1784 | that we don't leave an incomplete file lying around on |
| | 1785 | interrupted builds. |
| | 1786 | (clean): remove endian, e.h, and endian.h. |
| | 1787 | |
| | 1788 | Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| | 1789 | |
| | 1790 | * Makefile.in, configure.in: if target isn't supported, build a |
| | 1791 | harmless makefile. |
| | 1792 | |
| | 1793 | |
projects / deliverable / binutils-gdb.git / blame_incremental