Documentation/devicetree/bindings/media/atmel-isc.txt

   1 Atmel Image Sensor Controller (ISC)
   2 ----------------------------------------------
   3
   4 Required properties for ISC:
   5 - compatible
   6         Must be "atmel,sama5d2-isc".
   7 - reg
   8         Physical base address and length of the registers set for the device.
   9 - interrupts
  10         Should contain IRQ line for the ISC.
  11 - clocks
  12         List of clock specifiers, corresponding to entries in
  13         the clock-names property;
  14         Please refer to clock-bindings.txt.
  15 - clock-names
  16         Required elements: "hclock", "iscck", "gck".
  17 - #clock-cells
  18         Should be 0.
  19 - clock-output-names
  20         Should be "isc-mck".
  21 - pinctrl-names, pinctrl-0
  22         Please refer to pinctrl-bindings.txt.
  23
  24 ISC supports a single port node with parallel bus. It should contain one
  25 'port' child node with child 'endpoint' node. Please refer to the bindings
  26 defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
  27
  28 Example:
  29 isc: isc@f0008000 {
  30         compatible = "atmel,sama5d2-isc";
  31         reg = <0xf0008000 0x4000>;
  32         interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
  33         clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
  34         clock-names = "hclock", "iscck", "gck";
  35         #clock-cells = <0>;
  36         clock-output-names = "isc-mck";
  37         pinctrl-names = "default";
  38         pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
  39
  40         port {
  41                 isc_0: endpoint {
  42                         remote-endpoint = <&ov7740_0>;
  43                         hsync-active = <1>;
  44                         vsync-active = <0>;
  45                         pclk-sample = <1>;
  46                 };
  47         };
  48 };
  49
  50 i2c1: i2c@fc028000 {
  51         ov7740: camera@21 {
  52                 compatible = "ovti,ov7740";
  53                 reg = <0x21>;
  54                 clocks = <&isc>;
  55                 clock-names = "xvclk";
  56                 assigned-clocks = <&isc>;
  57                 assigned-clock-rates = <24000000>;
  58
  59                 port {
  60                         ov7740_0: endpoint {
  61                                 remote-endpoint = <&isc_0>;
  62                         };
  63                 };
  64         };
  65 };