Documentation/sound/oss/CS4232

   1 To configure the Crystal CS423x sound chip and activate its DSP functions,
   2 modules may be loaded in this order:
   3
   4         modprobe sound
   5         insmod ad1848
   6         insmod uart401
   7         insmod cs4232 io=* irq=* dma=* dma2=*
   8
   9 This is the meaning of the parameters:
  10
  11         io--I/O address of the Windows Sound System (normally 0x534)
  12         irq--IRQ of this device
  13         dma and dma2--DMA channels (DMA2 may be 0)
  14
  15 On some cards, the board attempts to do non-PnP setup, and fails.  If you
  16 have problems, use Linux' PnP facilities.
  17
  18 To get MIDI facilities add
  19
  20         insmod opl3 io=*
  21
  22 where "io" is the I/O address of the OPL3 synthesizer. This will be shown
  23 in /proc/sys/pnp and is normally 0x388.