arch/arm/boot/dts/dra7-evm.dts

   1 /*
   2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "dra74x.dtsi"
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/clk/ti-dra7-atl.h>
  13 #include <dt-bindings/input/input.h>
  14
  15 / {
  16         model = "TI DRA742";
  17         compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
  18
  19         memory {
  20                 device_type = "memory";
  21                 reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
  22         };
  23
  24         evm_3v3_sd: fixedregulator-sd {
  25                 compatible = "regulator-fixed";
  26                 regulator-name = "evm_3v3_sd";
  27                 regulator-min-microvolt = <3300000>;
  28                 regulator-max-microvolt = <3300000>;
  29                 enable-active-high;
  30                 gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
  31         };
  32
  33         evm_3v3_sw: fixedregulator-evm_3v3_sw {
  34                 compatible = "regulator-fixed";
  35                 regulator-name = "evm_3v3_sw";
  36                 vin-supply = <&sysen1>;
  37                 regulator-min-microvolt = <3300000>;
  38                 regulator-max-microvolt = <3300000>;
  39         };
  40
  41         aic_dvdd: fixedregulator-aic_dvdd {
  42                 /* TPS77018DBVT */
  43                 compatible = "regulator-fixed";
  44                 regulator-name = "aic_dvdd";
  45                 vin-supply = <&evm_3v3_sw>;
  46                 regulator-min-microvolt = <1800000>;
  47                 regulator-max-microvolt = <1800000>;
  48         };
  49
  50         extcon_usb1: extcon_usb1 {
  51                 compatible = "linux,extcon-usb-gpio";
  52                 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
  53         };
  54
  55         extcon_usb2: extcon_usb2 {
  56                 compatible = "linux,extcon-usb-gpio";
  57                 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
  58         };
  59
  60         vtt_fixed: fixedregulator-vtt {
  61                 compatible = "regulator-fixed";
  62                 regulator-name = "vtt_fixed";
  63                 regulator-min-microvolt = <1350000>;
  64                 regulator-max-microvolt = <1350000>;
  65                 regulator-always-on;
  66                 regulator-boot-on;
  67                 enable-active-high;
  68                 vin-supply = <&sysen2>;
  69                 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
  70         };
  71
  72         sound0: sound0 {
  73                 compatible = "simple-audio-card";
  74                 simple-audio-card,name = "DRA7xx-EVM";
  75                 simple-audio-card,widgets =
  76                         "Headphone", "Headphone Jack",
  77                         "Line", "Line Out",
  78                         "Microphone", "Mic Jack",
  79                         "Line", "Line In";
  80                 simple-audio-card,routing =
  81                         "Headphone Jack",       "HPLOUT",
  82                         "Headphone Jack",       "HPROUT",
  83                         "Line Out",             "LLOUT",
  84                         "Line Out",             "RLOUT",
  85                         "MIC3L",                "Mic Jack",
  86                         "MIC3R",                "Mic Jack",
  87                         "Mic Jack",             "Mic Bias",
  88                         "LINE1L",               "Line In",
  89                         "LINE1R",               "Line In";
  90                 simple-audio-card,format = "dsp_b";
  91                 simple-audio-card,bitclock-master = <&sound0_master>;
  92                 simple-audio-card,frame-master = <&sound0_master>;
  93                 simple-audio-card,bitclock-inversion;
  94
  95                 sound0_master: simple-audio-card,cpu {
  96                         sound-dai = <&mcasp3>;
  97                         system-clock-frequency = <5644800>;
  98                 };
  99
 100                 simple-audio-card,codec {
 101                         sound-dai = <&tlv320aic3106>;
 102                         clocks = <&atl_clkin2_ck>;
 103                 };
 104         };
 105
 106         leds {
 107                 compatible = "gpio-leds";
 108                 led@0 {
 109                         label = "dra7:usr1";
 110                         gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
 111                         default-state = "off";
 112                 };
 113
 114                 led@1 {
 115                         label = "dra7:usr2";
 116                         gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
 117                         default-state = "off";
 118                 };
 119
 120                 led@2 {
 121                         label = "dra7:usr3";
 122                         gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
 123                         default-state = "off";
 124                 };
 125
 126                 led@3 {
 127                         label = "dra7:usr4";
 128                         gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
 129                         default-state = "off";
 130                 };
 131         };
 132
 133         gpio_keys {
 134                 compatible = "gpio-keys";
 135                 #address-cells = <1>;
 136                 #size-cells = <0>;
 137                 autorepeat;
 138
 139                 USER1 {
 140                         label = "btnUser1";
 141                         linux,code = <BTN_0>;
 142                         gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
 143                 };
 144
 145                 USER2 {
 146                         label = "btnUser2";
 147                         linux,code = <BTN_1>;
 148                         gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
 149                 };
 150         };
 151 };
 152
 153 &dra7_pmx_core {
 154         pinctrl-names = "default";
 155         pinctrl-0 = <&vtt_pin>;
 156
 157         vtt_pin: pinmux_vtt_pin {
 158                 pinctrl-single,pins = <
 159                         DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
 160                 >;
 161         };
 162
 163         i2c1_pins: pinmux_i2c1_pins {
 164                 pinctrl-single,pins = <
 165                         DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
 166                         DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
 167                 >;
 168         };
 169
 170         i2c2_pins: pinmux_i2c2_pins {
 171                 pinctrl-single,pins = <
 172                         DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
 173                         DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
 174                 >;
 175         };
 176
 177         i2c3_pins: pinmux_i2c3_pins {
 178                 pinctrl-single,pins = <
 179                         DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
 180                         DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
 181                 >;
 182         };
 183
 184         mcspi1_pins: pinmux_mcspi1_pins {
 185                 pinctrl-single,pins = <
 186                         DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */
 187                         DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */
 188                         DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */
 189                         DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
 190                         DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
 191                         DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
 192                 >;
 193         };
 194
 195         mcspi2_pins: pinmux_mcspi2_pins {
 196                 pinctrl-single,pins = <
 197                         DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */
 198                         DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
 199                         DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
 200                         DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
 201                 >;
 202         };
 203
 204         uart1_pins: pinmux_uart1_pins {
 205                 pinctrl-single,pins = <
 206                         DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
 207                         DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
 208                         DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
 209                         DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
 210                 >;
 211         };
 212
 213         uart2_pins: pinmux_uart2_pins {
 214                 pinctrl-single,pins = <
 215                         DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */
 216                         DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */
 217                         DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
 218                         DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
 219                 >;
 220         };
 221
 222         uart3_pins: pinmux_uart3_pins {
 223                 pinctrl-single,pins = <
 224                         DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
 225                         DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
 226                 >;
 227         };
 228
 229         usb1_pins: pinmux_usb1_pins {
 230                 pinctrl-single,pins = <
 231                         DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 232                 >;
 233         };
 234
 235         usb2_pins: pinmux_usb2_pins {
 236                 pinctrl-single,pins = <
 237                         DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
 238                 >;
 239         };
 240
 241         nand_flash_x16: nand_flash_x16 {
 242                 /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
 243                  * So NAND flash requires following switch settings:
 244                  * SW5.1 (NAND_BOOTn) = ON (LOW)
 245                  * SW5.9 (GPMC_WPN) = OFF (HIGH)
 246                  */
 247                 pinctrl-single,pins = <
 248                         DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad0     */
 249                         DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad1     */
 250                         DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad2     */
 251                         DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad3     */
 252                         DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad4     */
 253                         DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad5     */
 254                         DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad6     */
 255                         DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad7     */
 256                         DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad8     */
 257                         DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad9     */
 258                         DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad10    */
 259                         DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad11    */
 260                         DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad12    */
 261                         DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad13    */
 262                         DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad14    */
 263                         DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad15    */
 264                         DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP  | MUX_MODE0)        /* gpmc_wait0   */
 265                         DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0)       /* gpmc_wen     */
 266                         DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0)        /* gpmc_csn0    */
 267                         DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0)       /* gpmc_advn_ale */
 268                         DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0)       /* gpmc_oen_ren  */
 269                         DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_be0n_cle */
 270                 >;
 271         };
 272
 273         cpsw_default: cpsw_default {
 274                 pinctrl-single,pins = <
 275                         /* Slave 1 */
 276                         DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txc.rgmii0_txc */
 277                         DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txctl.rgmii0_txctl */
 278                         DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_td3.rgmii0_txd3 */
 279                         DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txd2.rgmii0_txd2 */
 280                         DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txd1.rgmii0_txd1 */
 281                         DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txd0.rgmii0_txd0 */
 282                         DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxc.rgmii0_rxc */
 283                         DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxctl.rgmii0_rxctl */
 284                         DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxd3.rgmii0_rxd3 */
 285                         DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxd2.rgmii0_rxd2 */
 286                         DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxd1.rgmii0_rxd1 */
 287                         DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxd0.rgmii0_rxd0 */
 288
 289                         /* Slave 2 */
 290                         DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d12.rgmii1_txc */
 291                         DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d13.rgmii1_tctl */
 292                         DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d14.rgmii1_td3 */
 293                         DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d15.rgmii1_td2 */
 294                         DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d16.rgmii1_td1 */
 295                         DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d17.rgmii1_td0 */
 296                         DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)        /* vin2a_d18.rgmii1_rclk */
 297                         DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)        /* vin2a_d19.rgmii1_rctl */
 298                         DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)        /* vin2a_d20.rgmii1_rd3 */
 299                         DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)        /* vin2a_d21.rgmii1_rd2 */
 300                         DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)        /* vin2a_d22.rgmii1_rd1 */
 301                         DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)        /* vin2a_d23.rgmii1_rd0 */
 302                 >;
 303
 304         };
 305
 306         cpsw_sleep: cpsw_sleep {
 307                 pinctrl-single,pins = <
 308                         /* Slave 1 */
 309                         DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15)
 310                         DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15)
 311                         DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15)
 312                         DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15)
 313                         DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15)
 314                         DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15)
 315                         DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15)
 316                         DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15)
 317                         DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15)
 318                         DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15)
 319                         DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15)
 320                         DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15)
 321
 322                         /* Slave 2 */
 323                         DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
 324                         DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
 325                         DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
 326                         DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
 327                         DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
 328                         DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
 329                         DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
 330                         DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
 331                         DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
 332                         DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
 333                         DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
 334                         DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
 335                 >;
 336         };
 337
 338         davinci_mdio_default: davinci_mdio_default {
 339                 pinctrl-single,pins = <
 340                         DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)        /* mdio_d.mdio_d */
 341                         DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
 342                 >;
 343         };
 344
 345         davinci_mdio_sleep: davinci_mdio_sleep {
 346                 pinctrl-single,pins = <
 347                         DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
 348                         DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
 349                 >;
 350         };
 351
 352         dcan1_pins_default: dcan1_pins_default {
 353                 pinctrl-single,pins = <
 354                         DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
 355                         DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
 356                 >;
 357         };
 358
 359         dcan1_pins_sleep: dcan1_pins_sleep {
 360                 pinctrl-single,pins = <
 361                         DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
 362                         DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
 363                 >;
 364         };
 365
 366         atl_pins: pinmux_atl_pins {
 367                 pinctrl-single,pins = <
 368                         DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5)       /* xref_clk1.atl_clk1 */
 369                         DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5)       /* xref_clk2.atl_clk2 */
 370                 >;
 371         };
 372
 373         mcasp3_pins: pinmux_mcasp3_pins {
 374                 pinctrl-single,pins = <
 375                         DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* mcasp3_aclkx */
 376                         DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* mcasp3_fsx */
 377                         DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* mcasp3_axr0 */
 378                         DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* mcasp3_axr1 */
 379                 >;
 380         };
 381
 382         mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
 383                 pinctrl-single,pins = <
 384                         DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15)
 385                         DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15)
 386                         DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15)
 387                         DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15)
 388                 >;
 389         };
 390 };
 391
 392 &i2c1 {
 393         status = "okay";
 394         pinctrl-names = "default";
 395         pinctrl-0 = <&i2c1_pins>;
 396         clock-frequency = <400000>;
 397
 398         tps659038: tps659038@58 {
 399                 compatible = "ti,tps659038";
 400                 reg = <0x58>;
 401
 402                 tps659038_pmic {
 403                         compatible = "ti,tps659038-pmic";
 404
 405                         regulators {
 406                                 smps123_reg: smps123 {
 407                                         /* VDD_MPU */
 408                                         regulator-name = "smps123";
 409                                         regulator-min-microvolt = < 850000>;
 410                                         regulator-max-microvolt = <1250000>;
 411                                         regulator-always-on;
 412                                         regulator-boot-on;
 413                                 };
 414
 415                                 smps45_reg: smps45 {
 416                                         /* VDD_DSPEVE */
 417                                         regulator-name = "smps45";
 418                                         regulator-min-microvolt = < 850000>;
 419                                         regulator-max-microvolt = <1250000>;
 420                                         regulator-always-on;
 421                                         regulator-boot-on;
 422                                 };
 423
 424                                 smps6_reg: smps6 {
 425                                         /* VDD_GPU - over VDD_SMPS6 */
 426                                         regulator-name = "smps6";
 427                                         regulator-min-microvolt = <850000>;
 428                                         regulator-max-microvolt = <1250000>;
 429                                         regulator-always-on;
 430                                         regulator-boot-on;
 431                                 };
 432
 433                                 smps7_reg: smps7 {
 434                                         /* CORE_VDD */
 435                                         regulator-name = "smps7";
 436                                         regulator-min-microvolt = <850000>;
 437                                         regulator-max-microvolt = <1150000>;
 438                                         regulator-always-on;
 439                                         regulator-boot-on;
 440                                 };
 441
 442                                 smps8_reg: smps8 {
 443                                         /* VDD_IVAHD */
 444                                         regulator-name = "smps8";
 445                                         regulator-min-microvolt = < 850000>;
 446                                         regulator-max-microvolt = <1250000>;
 447                                         regulator-always-on;
 448                                         regulator-boot-on;
 449                                 };
 450
 451                                 smps9_reg: smps9 {
 452                                         /* VDDS1V8 */
 453                                         regulator-name = "smps9";
 454                                         regulator-min-microvolt = <1800000>;
 455                                         regulator-max-microvolt = <1800000>;
 456                                         regulator-always-on;
 457                                         regulator-boot-on;
 458                                 };
 459
 460                                 ldo1_reg: ldo1 {
 461                                         /* LDO1_OUT --> SDIO  */
 462                                         regulator-name = "ldo1";
 463                                         regulator-min-microvolt = <1800000>;
 464                                         regulator-max-microvolt = <3300000>;
 465                                         regulator-always-on;
 466                                         regulator-boot-on;
 467                                 };
 468
 469                                 ldo2_reg: ldo2 {
 470                                         /* VDD_RTCIO */
 471                                         /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
 472                                         regulator-name = "ldo2";
 473                                         regulator-min-microvolt = <3300000>;
 474                                         regulator-max-microvolt = <3300000>;
 475                                         regulator-always-on;
 476                                         regulator-boot-on;
 477                                 };
 478
 479                                 ldo3_reg: ldo3 {
 480                                         /* VDDA_1V8_PHY */
 481                                         regulator-name = "ldo3";
 482                                         regulator-min-microvolt = <1800000>;
 483                                         regulator-max-microvolt = <1800000>;
 484                                         regulator-always-on;
 485                                         regulator-boot-on;
 486                                 };
 487
 488                                 ldo9_reg: ldo9 {
 489                                         /* VDD_RTC */
 490                                         regulator-name = "ldo9";
 491                                         regulator-min-microvolt = <1050000>;
 492                                         regulator-max-microvolt = <1050000>;
 493                                         regulator-always-on;
 494                                         regulator-boot-on;
 495                                         regulator-allow-bypass;
 496                                 };
 497
 498                                 ldoln_reg: ldoln {
 499                                         /* VDDA_1V8_PLL */
 500                                         regulator-name = "ldoln";
 501                                         regulator-min-microvolt = <1800000>;
 502                                         regulator-max-microvolt = <1800000>;
 503                                         regulator-always-on;
 504                                         regulator-boot-on;
 505                                 };
 506
 507                                 ldousb_reg: ldousb {
 508                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 509                                         regulator-name = "ldousb";
 510                                         regulator-min-microvolt = <3300000>;
 511                                         regulator-max-microvolt = <3300000>;
 512                                         regulator-boot-on;
 513                                 };
 514
 515                                 /* REGEN1 is unused */
 516
 517                                 regen2: regen2 {
 518                                         /* Needed for PMIC internal resources */
 519                                         regulator-name = "regen2";
 520                                         regulator-boot-on;
 521                                         regulator-always-on;
 522                                 };
 523
 524                                 /* REGEN3 is unused */
 525
 526                                 sysen1: sysen1 {
 527                                         /* PMIC_REGEN_3V3 */
 528                                         regulator-name = "sysen1";
 529                                         regulator-boot-on;
 530                                         regulator-always-on;
 531                                 };
 532
 533                                 sysen2: sysen2 {
 534                                         /* PMIC_REGEN_DDR */
 535                                         regulator-name = "sysen2";
 536                                         regulator-boot-on;
 537                                         regulator-always-on;
 538                                 };
 539                         };
 540                 };
 541         };
 542
 543         pcf_lcd: gpio@20 {
 544                 compatible = "ti,pcf8575", "nxp,pcf8575";
 545                 reg = <0x20>;
 546                 gpio-controller;
 547                 #gpio-cells = <2>;
 548                 interrupt-parent = <&gpio6>;
 549                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 550                 interrupt-controller;
 551                 #interrupt-cells = <2>;
 552         };
 553
 554         pcf_gpio_21: gpio@21 {
 555                 compatible = "ti,pcf8575", "nxp,pcf8575";
 556                 reg = <0x21>;
 557                 lines-initial-states = <0x1408>;
 558                 gpio-controller;
 559                 #gpio-cells = <2>;
 560                 interrupt-parent = <&gpio6>;
 561                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 562                 interrupt-controller;
 563                 #interrupt-cells = <2>;
 564         };
 565
 566         tlv320aic3106: tlv320aic3106@19 {
 567                 #sound-dai-cells = <0>;
 568                 compatible = "ti,tlv320aic3106";
 569                 reg = <0x19>;
 570                 adc-settle-ms = <40>;
 571                 ai3x-micbias-vg = <1>;          /* 2.0V */
 572                 status = "okay";
 573
 574                 /* Regulators */
 575                 AVDD-supply = <&evm_3v3_sw>;
 576                 IOVDD-supply = <&evm_3v3_sw>;
 577                 DRVDD-supply = <&evm_3v3_sw>;
 578                 DVDD-supply = <&aic_dvdd>;
 579         };
 580 };
 581
 582 &i2c2 {
 583         status = "okay";
 584         pinctrl-names = "default";
 585         pinctrl-0 = <&i2c2_pins>;
 586         clock-frequency = <400000>;
 587
 588         pcf_hdmi: gpio@26 {
 589                 compatible = "ti,pcf8575", "nxp,pcf8575";
 590                 reg = <0x26>;
 591                 gpio-controller;
 592                 #gpio-cells = <2>;
 593                 p1 {
 594                         /* vin6_sel_s0: high: VIN6, low: audio */
 595                         gpio-hog;
 596                         gpios = <1 GPIO_ACTIVE_HIGH>;
 597                         output-low;
 598                         line-name = "vin6_sel_s0";
 599                 };
 600         };
 601 };
 602
 603 &i2c3 {
 604         status = "okay";
 605         pinctrl-names = "default";
 606         pinctrl-0 = <&i2c3_pins>;
 607         clock-frequency = <400000>;
 608 };
 609
 610 &mcspi1 {
 611         status = "okay";
 612         pinctrl-names = "default";
 613         pinctrl-0 = <&mcspi1_pins>;
 614 };
 615
 616 &mcspi2 {
 617         status = "okay";
 618         pinctrl-names = "default";
 619         pinctrl-0 = <&mcspi2_pins>;
 620 };
 621
 622 &uart1 {
 623         status = "okay";
 624         pinctrl-names = "default";
 625         pinctrl-0 = <&uart1_pins>;
 626         interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 627                               <&dra7_pmx_core 0x3e0>;
 628 };
 629
 630 &uart2 {
 631         status = "okay";
 632         pinctrl-names = "default";
 633         pinctrl-0 = <&uart2_pins>;
 634 };
 635
 636 &uart3 {
 637         status = "okay";
 638         pinctrl-names = "default";
 639         pinctrl-0 = <&uart3_pins>;
 640 };
 641
 642 &mmc1 {
 643         status = "okay";
 644         vmmc-supply = <&evm_3v3_sd>;
 645         vmmc_aux-supply = <&ldo1_reg>;
 646         bus-width = <4>;
 647         /*
 648          * SDCD signal is not being used here - using the fact that GPIO mode
 649          * is always hardwired.
 650          */
 651         cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
 652 };
 653
 654 &mmc2 {
 655         status = "okay";
 656         vmmc-supply = <&evm_3v3_sw>;
 657         bus-width = <8>;
 658 };
 659
 660 &cpu0 {
 661         cpu0-supply = <&smps123_reg>;
 662 };
 663
 664 &qspi {
 665         status = "okay";
 666
 667         spi-max-frequency = <64000000>;
 668         m25p80@0 {
 669                 compatible = "s25fl256s1";
 670                 spi-max-frequency = <64000000>;
 671                 reg = <0>;
 672                 spi-tx-bus-width = <1>;
 673                 spi-rx-bus-width = <4>;
 674                 #address-cells = <1>;
 675                 #size-cells = <1>;
 676
 677                 /* MTD partition table.
 678                  * The ROM checks the first four physical blocks
 679                  * for a valid file to boot and the flash here is
 680                  * 64KiB block size.
 681                  */
 682                 partition@0 {
 683                         label = "QSPI.SPL";
 684                         reg = <0x00000000 0x000010000>;
 685                 };
 686                 partition@1 {
 687                         label = "QSPI.SPL.backup1";
 688                         reg = <0x00010000 0x00010000>;
 689                 };
 690                 partition@2 {
 691                         label = "QSPI.SPL.backup2";
 692                         reg = <0x00020000 0x00010000>;
 693                 };
 694                 partition@3 {
 695                         label = "QSPI.SPL.backup3";
 696                         reg = <0x00030000 0x00010000>;
 697                 };
 698                 partition@4 {
 699                         label = "QSPI.u-boot";
 700                         reg = <0x00040000 0x00100000>;
 701                 };
 702                 partition@5 {
 703                         label = "QSPI.u-boot-spl-os";
 704                         reg = <0x00140000 0x00080000>;
 705                 };
 706                 partition@6 {
 707                         label = "QSPI.u-boot-env";
 708                         reg = <0x001c0000 0x00010000>;
 709                 };
 710                 partition@7 {
 711                         label = "QSPI.u-boot-env.backup1";
 712                         reg = <0x001d0000 0x0010000>;
 713                 };
 714                 partition@8 {
 715                         label = "QSPI.kernel";
 716                         reg = <0x001e0000 0x0800000>;
 717                 };
 718                 partition@9 {
 719                         label = "QSPI.file-system";
 720                         reg = <0x009e0000 0x01620000>;
 721                 };
 722         };
 723 };
 724
 725 &omap_dwc3_1 {
 726         extcon = <&extcon_usb1>;
 727 };
 728
 729 &omap_dwc3_2 {
 730         extcon = <&extcon_usb2>;
 731 };
 732
 733 &usb1 {
 734         dr_mode = "peripheral";
 735         pinctrl-names = "default";
 736         pinctrl-0 = <&usb1_pins>;
 737 };
 738
 739 &usb2 {
 740         dr_mode = "host";
 741         pinctrl-names = "default";
 742         pinctrl-0 = <&usb2_pins>;
 743 };
 744
 745 &elm {
 746         status = "okay";
 747 };
 748
 749 &gpmc {
 750         status = "okay";
 751         pinctrl-names = "default";
 752         pinctrl-0 = <&nand_flash_x16>;
 753         ranges = <0 0 0x08000000 0x01000000>;   /* minimum GPMC partition = 16MB */
 754         nand@0,0 {
 755                 compatible = "ti,omap2-nand";
 756                 reg = <0 0 4>;          /* device IO registers */
 757                 interrupt-parent = <&gpmc>;
 758                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 759                              <1 IRQ_TYPE_NONE>; /* termcount */
 760                 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
 761                 ti,nand-ecc-opt = "bch8";
 762                 ti,elm-id = <&elm>;
 763                 nand-bus-width = <16>;
 764                 gpmc,device-width = <2>;
 765                 gpmc,sync-clk-ps = <0>;
 766                 gpmc,cs-on-ns = <0>;
 767                 gpmc,cs-rd-off-ns = <80>;
 768                 gpmc,cs-wr-off-ns = <80>;
 769                 gpmc,adv-on-ns = <0>;
 770                 gpmc,adv-rd-off-ns = <60>;
 771                 gpmc,adv-wr-off-ns = <60>;
 772                 gpmc,we-on-ns = <10>;
 773                 gpmc,we-off-ns = <50>;
 774                 gpmc,oe-on-ns = <4>;
 775                 gpmc,oe-off-ns = <40>;
 776                 gpmc,access-ns = <40>;
 777                 gpmc,wr-access-ns = <80>;
 778                 gpmc,rd-cycle-ns = <80>;
 779                 gpmc,wr-cycle-ns = <80>;
 780                 gpmc,bus-turnaround-ns = <0>;
 781                 gpmc,cycle2cycle-delay-ns = <0>;
 782                 gpmc,clk-activation-ns = <0>;
 783                 gpmc,wr-data-mux-bus-ns = <0>;
 784                 /* MTD partition table */
 785                 /* All SPL-* partitions are sized to minimal length
 786                  * which can be independently programmable. For
 787                  * NAND flash this is equal to size of erase-block */
 788                 #address-cells = <1>;
 789                 #size-cells = <1>;
 790                 partition@0 {
 791                         label = "NAND.SPL";
 792                         reg = <0x00000000 0x000020000>;
 793                 };
 794                 partition@1 {
 795                         label = "NAND.SPL.backup1";
 796                         reg = <0x00020000 0x00020000>;
 797                 };
 798                 partition@2 {
 799                         label = "NAND.SPL.backup2";
 800                         reg = <0x00040000 0x00020000>;
 801                 };
 802                 partition@3 {
 803                         label = "NAND.SPL.backup3";
 804                         reg = <0x00060000 0x00020000>;
 805                 };
 806                 partition@4 {
 807                         label = "NAND.u-boot-spl-os";
 808                         reg = <0x00080000 0x00040000>;
 809                 };
 810                 partition@5 {
 811                         label = "NAND.u-boot";
 812                         reg = <0x000c0000 0x00100000>;
 813                 };
 814                 partition@6 {
 815                         label = "NAND.u-boot-env";
 816                         reg = <0x001c0000 0x00020000>;
 817                 };
 818                 partition@7 {
 819                         label = "NAND.u-boot-env.backup1";
 820                         reg = <0x001e0000 0x00020000>;
 821                 };
 822                 partition@8 {
 823                         label = "NAND.kernel";
 824                         reg = <0x00200000 0x00800000>;
 825                 };
 826                 partition@9 {
 827                         label = "NAND.file-system";
 828                         reg = <0x00a00000 0x0f600000>;
 829                 };
 830         };
 831 };
 832
 833 &usb2_phy1 {
 834         phy-supply = <&ldousb_reg>;
 835 };
 836
 837 &usb2_phy2 {
 838         phy-supply = <&ldousb_reg>;
 839 };
 840
 841 &gpio7 {
 842         ti,no-reset-on-init;
 843         ti,no-idle-on-init;
 844 };
 845
 846 &mac {
 847         status = "okay";
 848         pinctrl-names = "default", "sleep";
 849         pinctrl-0 = <&cpsw_default>;
 850         pinctrl-1 = <&cpsw_sleep>;
 851         dual_emac;
 852 };
 853
 854 &cpsw_emac0 {
 855         phy_id = <&davinci_mdio>, <2>;
 856         phy-mode = "rgmii";
 857         dual_emac_res_vlan = <1>;
 858 };
 859
 860 &cpsw_emac1 {
 861         phy_id = <&davinci_mdio>, <3>;
 862         phy-mode = "rgmii";
 863         dual_emac_res_vlan = <2>;
 864 };
 865
 866 &davinci_mdio {
 867         pinctrl-names = "default", "sleep";
 868         pinctrl-0 = <&davinci_mdio_default>;
 869         pinctrl-1 = <&davinci_mdio_sleep>;
 870 };
 871
 872 &dcan1 {
 873         status = "ok";
 874         pinctrl-names = "default", "sleep", "active";
 875         pinctrl-0 = <&dcan1_pins_sleep>;
 876         pinctrl-1 = <&dcan1_pins_sleep>;
 877         pinctrl-2 = <&dcan1_pins_default>;
 878 };
 879
 880 &atl {
 881         pinctrl-names = "default";
 882         pinctrl-0 = <&atl_pins>;
 883
 884         assigned-clocks = <&abe_dpll_sys_clk_mux>,
 885                           <&atl_gfclk_mux>,
 886                           <&dpll_abe_ck>,
 887                           <&dpll_abe_m2x2_ck>,
 888                           <&atl_clkin2_ck>;
 889         assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
 890         assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
 891
 892         status = "okay";
 893
 894         atl2 {
 895                 bws = <DRA7_ATL_WS_MCASP2_FSX>;
 896                 aws = <DRA7_ATL_WS_MCASP3_FSX>;
 897         };
 898 };
 899
 900 &mcasp3 {
 901         #sound-dai-cells = <0>;
 902         pinctrl-names = "default", "sleep";
 903         pinctrl-0 = <&mcasp3_pins>;
 904         pinctrl-1 = <&mcasp3_sleep_pins>;
 905
 906         assigned-clocks = <&mcasp3_ahclkx_mux>;
 907         assigned-clock-parents = <&atl_clkin2_ck>;
 908
 909         status = "okay";
 910
 911         op-mode = <0>;          /* MCASP_IIS_MODE */
 912         tdm-slots = <2>;
 913         /* 4 serializer */
 914         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 915                 1 2 0 0
 916         >;
 917         tx-num-evt = <32>;
 918         rx-num-evt = <32>;
 919 };
 920
 921 &mailbox5 {
 922         status = "okay";
 923         mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
 924                 status = "okay";
 925         };
 926         mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
 927                 status = "okay";
 928         };
 929 };
 930
 931 &mailbox6 {
 932         status = "okay";
 933         mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
 934                 status = "okay";
 935         };
 936         mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
 937                 status = "okay";
 938         };
 939 };