ARM: dts: Unify G2D device node with other devices on exynos4
[deliverable/linux.git] / arch / arm / boot / dts / exynos4210-origen.dts
1 /*
2 * Samsung's Exynos4210 based Origen board device tree source
3 *
4 * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
6 * Copyright (c) 2010-2011 Linaro Ltd.
7 * www.linaro.org
8 *
9 * Device tree source file for Insignal's Origen board which is based on
10 * Samsung's Exynos4210 SoC.
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 */
16
17 /dts-v1/;
18 #include "exynos4210.dtsi"
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/input/input.h>
21
22 / {
23 model = "Insignal Origen evaluation board based on Exynos4210";
24 compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
25
26 memory {
27 reg = <0x40000000 0x10000000
28 0x50000000 0x10000000
29 0x60000000 0x10000000
30 0x70000000 0x10000000>;
31 };
32
33 chosen {
34 bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
35 stdout-path = &serial_2;
36 };
37
38 regulators {
39 compatible = "simple-bus";
40 #address-cells = <1>;
41 #size-cells = <0>;
42
43 mmc_reg: regulator@0 {
44 compatible = "regulator-fixed";
45 reg = <0>;
46 regulator-name = "VMEM_VDD_2.8V";
47 regulator-min-microvolt = <2800000>;
48 regulator-max-microvolt = <2800000>;
49 gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
50 enable-active-high;
51 };
52 };
53
54 gpio_keys {
55 compatible = "gpio-keys";
56 #address-cells = <1>;
57 #size-cells = <0>;
58
59 up {
60 label = "Up";
61 gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
62 linux,code = <KEY_UP>;
63 gpio-key,wakeup;
64 };
65
66 down {
67 label = "Down";
68 gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
69 linux,code = <KEY_DOWN>;
70 gpio-key,wakeup;
71 };
72
73 back {
74 label = "Back";
75 gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
76 linux,code = <KEY_BACK>;
77 gpio-key,wakeup;
78 };
79
80 home {
81 label = "Home";
82 gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
83 linux,code = <KEY_HOME>;
84 gpio-key,wakeup;
85 };
86
87 menu {
88 label = "Menu";
89 gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
90 linux,code = <KEY_MENU>;
91 gpio-key,wakeup;
92 };
93 };
94
95 leds {
96 compatible = "gpio-leds";
97 status {
98 gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
99 linux,default-trigger = "heartbeat";
100 };
101 };
102
103 fixed-rate-clocks {
104 xxti {
105 compatible = "samsung,clock-xxti";
106 clock-frequency = <0>;
107 };
108
109 xusbxti {
110 compatible = "samsung,clock-xusbxti";
111 clock-frequency = <24000000>;
112 };
113 };
114
115 display-timings {
116 native-mode = <&timing0>;
117 timing0: timing {
118 clock-frequency = <47500000>;
119 hactive = <1024>;
120 vactive = <600>;
121 hfront-porch = <64>;
122 hback-porch = <16>;
123 hsync-len = <48>;
124 vback-porch = <64>;
125 vfront-porch = <16>;
126 vsync-len = <3>;
127 };
128 };
129 };
130
131 &cpu0 {
132 cpu0-supply = <&buck1_reg>;
133 };
134
135 &fimd {
136 pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
137 pinctrl-names = "default";
138 status = "okay";
139 };
140
141 &i2c_0 {
142 status = "okay";
143 samsung,i2c-sda-delay = <100>;
144 samsung,i2c-max-bus-freq = <20000>;
145 pinctrl-0 = <&i2c0_bus>;
146 pinctrl-names = "default";
147
148 max8997_pmic@66 {
149 compatible = "maxim,max8997-pmic";
150 reg = <0x66>;
151 interrupt-parent = <&gpx0>;
152 interrupts = <4 0>, <3 0>;
153
154 max8997,pmic-buck1-dvs-voltage = <1350000>;
155 max8997,pmic-buck2-dvs-voltage = <1100000>;
156 max8997,pmic-buck5-dvs-voltage = <1200000>;
157
158 regulators {
159 ldo1_reg: LDO1 {
160 regulator-name = "VDD_ABB_3.3V";
161 regulator-min-microvolt = <3300000>;
162 regulator-max-microvolt = <3300000>;
163 };
164
165 ldo2_reg: LDO2 {
166 regulator-name = "VDD_ALIVE_1.1V";
167 regulator-min-microvolt = <1100000>;
168 regulator-max-microvolt = <1100000>;
169 regulator-always-on;
170 };
171
172 ldo3_reg: LDO3 {
173 regulator-name = "VMIPI_1.1V";
174 regulator-min-microvolt = <1100000>;
175 regulator-max-microvolt = <1100000>;
176 };
177
178 ldo4_reg: LDO4 {
179 regulator-name = "VDD_RTC_1.8V";
180 regulator-min-microvolt = <1800000>;
181 regulator-max-microvolt = <1800000>;
182 regulator-always-on;
183 };
184
185 ldo6_reg: LDO6 {
186 regulator-name = "VMIPI_1.8V";
187 regulator-min-microvolt = <1800000>;
188 regulator-max-microvolt = <1800000>;
189 regulator-always-on;
190 };
191
192 ldo7_reg: LDO7 {
193 regulator-name = "VDD_AUD_1.8V";
194 regulator-min-microvolt = <1800000>;
195 regulator-max-microvolt = <1800000>;
196 };
197
198 ldo8_reg: LDO8 {
199 regulator-name = "VADC_3.3V";
200 regulator-min-microvolt = <3300000>;
201 regulator-max-microvolt = <3300000>;
202 };
203
204 ldo9_reg: LDO9 {
205 regulator-name = "DVDD_SWB_2.8V";
206 regulator-min-microvolt = <2800000>;
207 regulator-max-microvolt = <2800000>;
208 regulator-always-on;
209 };
210
211 ldo10_reg: LDO10 {
212 regulator-name = "VDD_PLL_1.1V";
213 regulator-min-microvolt = <1100000>;
214 regulator-max-microvolt = <1100000>;
215 regulator-always-on;
216 };
217
218 ldo11_reg: LDO11 {
219 regulator-name = "VDD_AUD_3V";
220 regulator-min-microvolt = <3000000>;
221 regulator-max-microvolt = <3000000>;
222 };
223
224 ldo14_reg: LDO14 {
225 regulator-name = "AVDD18_SWB_1.8V";
226 regulator-min-microvolt = <1800000>;
227 regulator-max-microvolt = <1800000>;
228 regulator-always-on;
229 };
230
231 ldo17_reg: LDO17 {
232 regulator-name = "VDD_SWB_3.3V";
233 regulator-min-microvolt = <3300000>;
234 regulator-max-microvolt = <3300000>;
235 regulator-always-on;
236 };
237
238 ldo21_reg: LDO21 {
239 regulator-name = "VDD_MIF_1.2V";
240 regulator-min-microvolt = <1200000>;
241 regulator-max-microvolt = <1200000>;
242 regulator-always-on;
243 };
244
245 buck1_reg: BUCK1 {
246 /*
247 * HACK: The real name is VDD_ARM_1.2V,
248 * but exynos-cpufreq does not support
249 * DT-based regulator lookup yet.
250 */
251 regulator-name = "vdd_arm";
252 regulator-min-microvolt = <950000>;
253 regulator-max-microvolt = <1350000>;
254 regulator-always-on;
255 regulator-boot-on;
256 };
257
258 buck2_reg: BUCK2 {
259 regulator-name = "VDD_INT_1.1V";
260 regulator-min-microvolt = <900000>;
261 regulator-max-microvolt = <1100000>;
262 regulator-always-on;
263 regulator-boot-on;
264 };
265
266 buck3_reg: BUCK3 {
267 regulator-name = "VDD_G3D_1.1V";
268 regulator-min-microvolt = <900000>;
269 regulator-max-microvolt = <1100000>;
270 };
271
272 buck5_reg: BUCK5 {
273 regulator-name = "VDDQ_M1M2_1.2V";
274 regulator-min-microvolt = <1200000>;
275 regulator-max-microvolt = <1200000>;
276 regulator-always-on;
277 };
278
279 buck7_reg: BUCK7 {
280 regulator-name = "VDD_LCD_3.3V";
281 regulator-min-microvolt = <3300000>;
282 regulator-max-microvolt = <3300000>;
283 regulator-boot-on;
284 regulator-always-on;
285 };
286 };
287 };
288 };
289
290 &mfc {
291 samsung,mfc-r = <0x43000000 0x800000>;
292 samsung,mfc-l = <0x51000000 0x800000>;
293 status = "okay";
294 };
295
296 &sdhci_0 {
297 bus-width = <4>;
298 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
299 pinctrl-names = "default";
300 vmmc-supply = <&mmc_reg>;
301 status = "okay";
302 };
303
304 &sdhci_2 {
305 bus-width = <4>;
306 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
307 pinctrl-names = "default";
308 vmmc-supply = <&mmc_reg>;
309 status = "okay";
310 };
311
312 &serial_0 {
313 status = "okay";
314 };
315
316 &serial_1 {
317 status = "okay";
318 };
319
320 &serial_2 {
321 status = "okay";
322 };
323
324 &serial_3 {
325 status = "okay";
326 };
327
328 &rtc {
329 status = "okay";
330 };
331
332 &tmu {
333 status = "okay";
334 };
335
336 &watchdog {
337 status = "okay";
338 };
This page took 0.051832 seconds and 5 git commands to generate.