arch/arm/boot/dts/exynos4412-trats2.dts

   1 /*
   2  * Samsung's Exynos4412 based Trats 2 board device tree source
   3  *
   4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  *
   7  * Device tree source file for Samsung's Trats 2 board which is based on
   8  * Samsung's Exynos4412 SoC.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 /dts-v1/;
  16 #include "exynos4412.dtsi"
  17 #include "exynos4412-ppmu-common.dtsi"
  18 #include <dt-bindings/gpio/gpio.h>
  19 #include <dt-bindings/interrupt-controller/irq.h>
  20 #include <dt-bindings/clock/maxim,max77686.h>
  21
  22 / {
  23         model = "Samsung Trats 2 based on Exynos4412";
  24         compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
  25
  26         aliases {
  27                 i2c9 = &i2c_ak8975;
  28                 i2c10 = &i2c_cm36651;
  29                 i2c11 = &i2c_max77693;
  30                 i2c12 = &i2c_max77693_fuel;
  31         };
  32
  33         memory {
  34                 reg =  <0x40000000 0x40000000>;
  35         };
  36
  37         chosen {
  38                 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
  39                 stdout-path = &serial_2;
  40         };
  41
  42         firmware@0204F000 {
  43                 compatible = "samsung,secure-firmware";
  44                 reg = <0x0204F000 0x1000>;
  45         };
  46
  47         fixed-rate-clocks {
  48                 xxti {
  49                         compatible = "samsung,clock-xxti", "fixed-clock";
  50                         clock-frequency = <0>;
  51                 };
  52
  53                 xusbxti {
  54                         compatible = "samsung,clock-xusbxti", "fixed-clock";
  55                         clock-frequency = <24000000>;
  56                 };
  57         };
  58
  59         regulators {
  60                 compatible = "simple-bus";
  61                 #address-cells = <1>;
  62                 #size-cells = <0>;
  63
  64                 cam_io_reg: voltage-regulator-1 {
  65                         compatible = "regulator-fixed";
  66                         regulator-name = "CAM_SENSOR_A";
  67                         regulator-min-microvolt = <2800000>;
  68                         regulator-max-microvolt = <2800000>;
  69                         gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
  70                         enable-active-high;
  71                 };
  72
  73                 lcd_vdd3_reg: voltage-regulator-2 {
  74                         compatible = "regulator-fixed";
  75                         regulator-name = "LCD_VDD_2.2V";
  76                         regulator-min-microvolt = <2200000>;
  77                         regulator-max-microvolt = <2200000>;
  78                         gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
  79                         enable-active-high;
  80                 };
  81
  82                 cam_af_reg: voltage-regulator-3 {
  83                         compatible = "regulator-fixed";
  84                         regulator-name = "CAM_AF";
  85                         regulator-min-microvolt = <2800000>;
  86                         regulator-max-microvolt = <2800000>;
  87                         gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
  88                         enable-active-high;
  89                 };
  90
  91                 ps_als_reg: voltage-regulator-5 {
  92                         compatible = "regulator-fixed";
  93                         regulator-name = "LED_A_3.0V";
  94                         regulator-min-microvolt = <3000000>;
  95                         regulator-max-microvolt = <3000000>;
  96                         gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
  97                         enable-active-high;
  98                 };
  99         };
 100
 101         gpio-keys {
 102                 compatible = "gpio-keys";
 103
 104                 key-down {
 105                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 106                         linux,code = <114>;
 107                         label = "volume down";
 108                         debounce-interval = <10>;
 109                 };
 110
 111                 key-up {
 112                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 113                         linux,code = <115>;
 114                         label = "volume up";
 115                         debounce-interval = <10>;
 116                 };
 117
 118                 key-power {
 119                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 120                         linux,code = <116>;
 121                         label = "power";
 122                         debounce-interval = <10>;
 123                         wakeup-source;
 124                 };
 125
 126                 key-ok {
 127                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
 128                         linux,code = <139>;
 129                         label = "ok";
 130                         debounce-inteval = <10>;
 131                         wakeup-source;
 132                 };
 133         };
 134
 135         i2c_max77693: i2c-gpio-1 {
 136                 compatible = "i2c-gpio";
 137                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
 138                 i2c-gpio,delay-us = <2>;
 139                 #address-cells = <1>;
 140                 #size-cells = <0>;
 141                 status = "okay";
 142
 143                 max77693@66 {
 144                         compatible = "maxim,max77693";
 145                         interrupt-parent = <&gpx1>;
 146                         interrupts = <5 2>;
 147                         reg = <0x66>;
 148
 149                         regulators {
 150                                 esafeout1_reg: ESAFEOUT1 {
 151                                         regulator-name = "ESAFEOUT1";
 152                                 };
 153                                 esafeout2_reg: ESAFEOUT2 {
 154                                         regulator-name = "ESAFEOUT2";
 155                                 };
 156                                 charger_reg: CHARGER {
 157                                         regulator-name = "CHARGER";
 158                                         regulator-min-microamp = <60000>;
 159                                         regulator-max-microamp = <2580000>;
 160                                 };
 161                         };
 162
 163                         max77693_haptic {
 164                                 compatible = "maxim,max77693-haptic";
 165                                 haptic-supply = <&ldo26_reg>;
 166                                 pwms = <&pwm 0 38022 0>;
 167                         };
 168
 169                         charger {
 170                                 compatible = "maxim,max77693-charger";
 171
 172                                 maxim,constant-microvolt = <4350000>;
 173                                 maxim,min-system-microvolt = <3600000>;
 174                                 maxim,thermal-regulation-celsius = <100>;
 175                                 maxim,battery-overcurrent-microamp = <3500000>;
 176                                 maxim,charge-input-threshold-microvolt = <4300000>;
 177                         };
 178                 };
 179         };
 180
 181         i2c_max77693_fuel: i2c-gpio-3 {
 182                 compatible = "i2c-gpio";
 183                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
 184                 i2c-gpio,delay-us = <2>;
 185                 #address-cells = <1>;
 186                 #size-cells = <0>;
 187                 status = "okay";
 188
 189                 max77693-fuel-gauge@36 {
 190                         compatible = "maxim,max17047";
 191                         interrupt-parent = <&gpx2>;
 192                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 193                         reg = <0x36>;
 194
 195                         maxim,over-heat-temp = <700>;
 196                         maxim,over-volt = <4500>;
 197                 };
 198         };
 199
 200         i2c_ak8975: i2c-gpio-0 {
 201                 compatible = "i2c-gpio";
 202                 gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
 203                 i2c-gpio,delay-us = <2>;
 204                 #address-cells = <1>;
 205                 #size-cells = <0>;
 206                 status = "okay";
 207
 208                 ak8975@0c {
 209                         compatible = "asahi-kasei,ak8975";
 210                         reg = <0x0c>;
 211                         gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
 212                 };
 213         };
 214
 215         i2c_cm36651: i2c-gpio-2 {
 216                 compatible = "i2c-gpio";
 217                 gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
 218                 i2c-gpio,delay-us = <2>;
 219                 #address-cells = <1>;
 220                 #size-cells = <0>;
 221
 222                 cm36651@18 {
 223                         compatible = "capella,cm36651";
 224                         reg = <0x18>;
 225                         interrupt-parent = <&gpx0>;
 226                         interrupts = <2 2>;
 227                         vled-supply = <&ps_als_reg>;
 228                 };
 229         };
 230
 231         camera: camera {
 232                 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 233                 pinctrl-names = "default";
 234                 status = "okay";
 235                 assigned-clocks = <&clock CLK_MOUT_CAM0>,
 236                                   <&clock CLK_MOUT_CAM1>;
 237                 assigned-clock-parents = <&clock CLK_XUSBXTI>,
 238                                          <&clock CLK_XUSBXTI>;
 239
 240
 241         };
 242
 243         sound {
 244                 compatible = "samsung,trats2-audio";
 245                 samsung,i2s-controller = <&i2s0>;
 246                 samsung,model = "Trats2";
 247                 samsung,audio-codec = <&wm1811>;
 248                 samsung,audio-routing =
 249                         "SPK", "SPKOUTLN",
 250                         "SPK", "SPKOUTLP",
 251                         "SPK", "SPKOUTRN",
 252                         "SPK", "SPKOUTRP";
 253         };
 254
 255         thermistor-ap {
 256                 compatible = "murata,ncp15wb473";
 257                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 258                 pullup-ohm = <100000>;   /* 100K */
 259                 pulldown-ohm = <100000>; /* 100K */
 260                 io-channels = <&adc 1>;  /* AP temperature */
 261         };
 262
 263         thermistor-battery {
 264                 compatible = "murata,ncp15wb473";
 265                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 266                 pullup-ohm = <100000>;   /* 100K */
 267                 pulldown-ohm = <100000>; /* 100K */
 268                 io-channels = <&adc 2>;  /* Battery temperature */
 269         };
 270
 271         thermal-zones {
 272                 cpu_thermal: cpu-thermal {
 273                         cooling-maps {
 274                                 map0 {
 275                                      /* Corresponds to 800MHz at freq_table */
 276                                      cooling-device = <&cpu0 7 7>;
 277                                 };
 278                                 map1 {
 279                                      /* Corresponds to 200MHz at freq_table */
 280                                      cooling-device = <&cpu0 13 13>;
 281                                };
 282                        };
 283                 };
 284         };
 285 };
 286
 287 &adc {
 288         vdd-supply = <&ldo3_reg>;
 289         status = "okay";
 290 };
 291
 292 &bus_dmc {
 293         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
 294         vdd-supply = <&buck1_reg>;
 295         status = "okay";
 296 };
 297
 298 &bus_acp {
 299         devfreq = <&bus_dmc>;
 300         status = "okay";
 301 };
 302
 303 &bus_c2c {
 304         devfreq = <&bus_dmc>;
 305         status = "okay";
 306 };
 307
 308 &bus_leftbus {
 309         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
 310         vdd-supply = <&buck3_reg>;
 311         status = "okay";
 312 };
 313
 314 &bus_rightbus {
 315         devfreq = <&bus_leftbus>;
 316         status = "okay";
 317 };
 318
 319 &bus_display {
 320         devfreq = <&bus_leftbus>;
 321         status = "okay";
 322 };
 323
 324 &bus_fsys {
 325         devfreq = <&bus_leftbus>;
 326         status = "okay";
 327 };
 328
 329 &bus_peri {
 330         devfreq = <&bus_leftbus>;
 331         status = "okay";
 332 };
 333
 334 &bus_mfc {
 335         devfreq = <&bus_leftbus>;
 336         status = "okay";
 337 };
 338
 339 &cpu0 {
 340         cpu0-supply = <&buck2_reg>;
 341 };
 342
 343 &csis_0 {
 344         status = "okay";
 345         vddcore-supply = <&ldo8_reg>;
 346         vddio-supply = <&ldo10_reg>;
 347         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 348                         <&clock CLK_SCLK_CSIS0>;
 349         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 350         assigned-clock-rates = <0>, <176000000>;
 351
 352         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 353         port@3 {
 354                 reg = <3>;
 355                 csis0_ep: endpoint {
 356                         remote-endpoint = <&s5c73m3_ep>;
 357                         data-lanes = <1 2 3 4>;
 358                         samsung,csis-hs-settle = <12>;
 359                 };
 360         };
 361 };
 362
 363 &csis_1 {
 364         status = "okay";
 365         vddcore-supply = <&ldo8_reg>;
 366         vddio-supply = <&ldo10_reg>;
 367         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 368                         <&clock CLK_SCLK_CSIS1>;
 369         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 370         assigned-clock-rates = <0>, <176000000>;
 371
 372         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 373         port@4 {
 374                 reg = <4>;
 375                 csis1_ep: endpoint {
 376                         remote-endpoint = <&is_s5k6a3_ep>;
 377                         data-lanes = <1>;
 378                         samsung,csis-hs-settle = <18>;
 379                         samsung,csis-wclk;
 380                 };
 381         };
 382 };
 383
 384 &dsi_0 {
 385         vddcore-supply = <&ldo8_reg>;
 386         vddio-supply = <&ldo10_reg>;
 387         samsung,pll-clock-frequency = <24000000>;
 388         status = "okay";
 389
 390         ports {
 391                 #address-cells = <1>;
 392                 #size-cells = <0>;
 393
 394                 port@1 {
 395                         reg = <1>;
 396
 397                         dsi_out: endpoint {
 398                                 remote-endpoint = <&dsi_in>;
 399                                 samsung,burst-clock-frequency = <500000000>;
 400                                 samsung,esc-clock-frequency = <20000000>;
 401                         };
 402                 };
 403         };
 404
 405         panel@0 {
 406                 compatible = "samsung,s6e8aa0";
 407                 reg = <0>;
 408                 vdd3-supply = <&lcd_vdd3_reg>;
 409                 vci-supply = <&ldo25_reg>;
 410                 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 411                 power-on-delay= <50>;
 412                 reset-delay = <100>;
 413                 init-delay = <100>;
 414                 flip-horizontal;
 415                 flip-vertical;
 416                 panel-width-mm = <58>;
 417                 panel-height-mm = <103>;
 418
 419                 display-timings {
 420                         timing-0 {
 421                                 clock-frequency = <57153600>;
 422                                 hactive = <720>;
 423                                 vactive = <1280>;
 424                                 hfront-porch = <5>;
 425                                 hback-porch = <5>;
 426                                 hsync-len = <5>;
 427                                 vfront-porch = <13>;
 428                                 vback-porch = <1>;
 429                                 vsync-len = <2>;
 430                         };
 431                 };
 432
 433                 port {
 434                         dsi_in: endpoint {
 435                                 remote-endpoint = <&dsi_out>;
 436                         };
 437                 };
 438         };
 439 };
 440
 441 &exynos_usbphy {
 442         vbus-supply = <&esafeout1_reg>;
 443         status = "okay";
 444 };
 445
 446 &fimc_0 {
 447         status = "okay";
 448         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 449                         <&clock CLK_SCLK_FIMC0>;
 450         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 451         assigned-clock-rates = <0>, <176000000>;
 452 };
 453
 454 &fimc_1 {
 455         status = "okay";
 456         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 457                         <&clock CLK_SCLK_FIMC1>;
 458         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 459         assigned-clock-rates = <0>, <176000000>;
 460 };
 461
 462 &fimc_2 {
 463         status = "okay";
 464         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 465                         <&clock CLK_SCLK_FIMC2>;
 466         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 467         assigned-clock-rates = <0>, <176000000>;
 468 };
 469
 470 &fimc_3 {
 471         status = "okay";
 472         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 473                         <&clock CLK_SCLK_FIMC3>;
 474         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 475         assigned-clock-rates = <0>, <176000000>;
 476 };
 477
 478 &fimc_is {
 479         pinctrl-0 = <&fimc_is_uart>;
 480         pinctrl-names = "default";
 481         status = "okay";
 482
 483         i2c1_isp: i2c-isp@12140000 {
 484                 pinctrl-0 = <&fimc_is_i2c1>;
 485                 pinctrl-names = "default";
 486
 487                 s5k6a3@10 {
 488                         compatible = "samsung,s5k6a3";
 489                         reg = <0x10>;
 490                         svdda-supply = <&cam_io_reg>;
 491                         svddio-supply = <&ldo19_reg>;
 492                         afvdd-supply = <&ldo19_reg>;
 493                         clock-frequency = <24000000>;
 494                         /* CAM_B_CLKOUT */
 495                         clocks = <&camera 1>;
 496                         clock-names = "extclk";
 497                         samsung,camclk-out = <1>;
 498                         gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
 499
 500                         port {
 501                                 is_s5k6a3_ep: endpoint {
 502                                         remote-endpoint = <&csis1_ep>;
 503                                         data-lanes = <1>;
 504                                 };
 505                         };
 506                 };
 507         };
 508 };
 509
 510 &fimc_lite_0 {
 511         status = "okay";
 512 };
 513
 514 &fimc_lite_1 {
 515         status = "okay";
 516 };
 517
 518 &fimd {
 519         status = "okay";
 520 };
 521
 522 &hsotg {
 523         vusb_d-supply = <&ldo15_reg>;
 524         vusb_a-supply = <&ldo12_reg>;
 525         dr_mode = "peripheral";
 526         status = "okay";
 527 };
 528
 529 &i2c_0 {
 530         samsung,i2c-sda-delay = <100>;
 531         samsung,i2c-slave-addr = <0x10>;
 532         samsung,i2c-max-bus-freq = <400000>;
 533         pinctrl-0 = <&i2c0_bus>;
 534         pinctrl-names = "default";
 535         status = "okay";
 536
 537         s5c73m3@3c {
 538                 compatible = "samsung,s5c73m3";
 539                 reg = <0x3c>;
 540                 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
 541                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
 542                 vdd-int-supply = <&buck9_reg>;
 543                 vddio-cis-supply = <&ldo9_reg>;
 544                 vdda-supply = <&ldo17_reg>;
 545                 vddio-host-supply = <&ldo18_reg>;
 546                 vdd-af-supply = <&cam_af_reg>;
 547                 vdd-reg-supply = <&cam_io_reg>;
 548                 clock-frequency = <24000000>;
 549                 /* CAM_A_CLKOUT */
 550                 clocks = <&camera 0>;
 551                 clock-names = "cis_extclk";
 552                 port {
 553                         s5c73m3_ep: endpoint {
 554                                 remote-endpoint = <&csis0_ep>;
 555                                 data-lanes = <1 2 3 4>;
 556                         };
 557                 };
 558         };
 559 };
 560
 561 &i2c_3 {
 562         samsung,i2c-sda-delay = <100>;
 563         samsung,i2c-slave-addr = <0x10>;
 564         samsung,i2c-max-bus-freq = <400000>;
 565         pinctrl-0 = <&i2c3_bus>;
 566         pinctrl-names = "default";
 567         status = "okay";
 568
 569         mms114-touchscreen@48 {
 570                 compatible = "melfas,mms114";
 571                 reg = <0x48>;
 572                 interrupt-parent = <&gpm2>;
 573                 interrupts = <3 2>;
 574                 x-size = <720>;
 575                 y-size = <1280>;
 576                 avdd-supply = <&ldo23_reg>;
 577                 vdd-supply = <&ldo24_reg>;
 578         };
 579 };
 580
 581 &i2c_4 {
 582         samsung,i2c-sda-delay = <100>;
 583         samsung,i2c-slave-addr = <0x10>;
 584         samsung,i2c-max-bus-freq = <100000>;
 585         pinctrl-0 = <&i2c4_bus>;
 586         pinctrl-names = "default";
 587         status = "okay";
 588
 589         wm1811: wm1811@1a {
 590                 compatible = "wlf,wm1811";
 591                 reg = <0x1a>;
 592                 clocks = <&pmu_system_controller 0>;
 593                 clock-names = "MCLK1";
 594                 DCVDD-supply = <&ldo3_reg>;
 595                 DBVDD1-supply = <&ldo3_reg>;
 596                 wlf,ldo1ena = <&gpj0 4 0>;
 597         };
 598 };
 599
 600 &i2c_7 {
 601         samsung,i2c-sda-delay = <100>;
 602         samsung,i2c-slave-addr = <0x10>;
 603         samsung,i2c-max-bus-freq = <100000>;
 604         pinctrl-0 = <&i2c7_bus>;
 605         pinctrl-names = "default";
 606         status = "okay";
 607
 608         max77686: max77686_pmic@09 {
 609                 compatible = "maxim,max77686";
 610                 interrupt-parent = <&gpx0>;
 611                 interrupts = <7 0>;
 612                 reg = <0x09>;
 613                 #clock-cells = <1>;
 614
 615                 voltage-regulators {
 616                         ldo1_reg: LDO1 {
 617                                 regulator-name = "VALIVE_1.0V_AP";
 618                                 regulator-min-microvolt = <1000000>;
 619                                 regulator-max-microvolt = <1000000>;
 620                                 regulator-always-on;
 621                         };
 622
 623                         ldo2_reg: LDO2 {
 624                                 regulator-name = "VM1M2_1.2V_AP";
 625                                 regulator-min-microvolt = <1200000>;
 626                                 regulator-max-microvolt = <1200000>;
 627                                 regulator-always-on;
 628                                 regulator-state-mem {
 629                                         regulator-on-in-suspend;
 630                                 };
 631                         };
 632
 633                         ldo3_reg: LDO3 {
 634                                 regulator-name = "VCC_1.8V_AP";
 635                                 regulator-min-microvolt = <1800000>;
 636                                 regulator-max-microvolt = <1800000>;
 637                                 regulator-always-on;
 638                         };
 639
 640                         ldo4_reg: LDO4 {
 641                                 regulator-name = "VCC_2.8V_AP";
 642                                 regulator-min-microvolt = <2800000>;
 643                                 regulator-max-microvolt = <2800000>;
 644                                 regulator-always-on;
 645                         };
 646
 647                         ldo5_reg: LDO5 {
 648                                 regulator-name = "VCC_1.8V_IO";
 649                                 regulator-min-microvolt = <1800000>;
 650                                 regulator-max-microvolt = <1800000>;
 651                                 regulator-always-on;
 652                         };
 653
 654                         ldo6_reg: LDO6 {
 655                                 regulator-name = "VMPLL_1.0V_AP";
 656                                 regulator-min-microvolt = <1000000>;
 657                                 regulator-max-microvolt = <1000000>;
 658                                 regulator-always-on;
 659                                 regulator-state-mem {
 660                                         regulator-on-in-suspend;
 661                                 };
 662                         };
 663
 664                         ldo7_reg: LDO7 {
 665                                 regulator-name = "VPLL_1.0V_AP";
 666                                 regulator-min-microvolt = <1000000>;
 667                                 regulator-max-microvolt = <1000000>;
 668                                 regulator-always-on;
 669                                 regulator-state-mem {
 670                                         regulator-on-in-suspend;
 671                                 };
 672                         };
 673
 674                         ldo8_reg: LDO8 {
 675                                 regulator-name = "VMIPI_1.0V";
 676                                 regulator-min-microvolt = <1000000>;
 677                                 regulator-max-microvolt = <1000000>;
 678                                 regulator-state-mem {
 679                                         regulator-off-in-suspend;
 680                                 };
 681                         };
 682
 683                         ldo9_reg: LDO9 {
 684                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 685                                 regulator-min-microvolt = <1200000>;
 686                                 regulator-max-microvolt = <1200000>;
 687                         };
 688
 689                         ldo10_reg: LDO10 {
 690                                 regulator-name = "VMIPI_1.8V";
 691                                 regulator-min-microvolt = <1800000>;
 692                                 regulator-max-microvolt = <1800000>;
 693                                 regulator-state-mem {
 694                                         regulator-off-in-suspend;
 695                                 };
 696                         };
 697
 698                         ldo11_reg: LDO11 {
 699                                 regulator-name = "VABB1_1.95V";
 700                                 regulator-min-microvolt = <1950000>;
 701                                 regulator-max-microvolt = <1950000>;
 702                                 regulator-always-on;
 703                                 regulator-state-mem {
 704                                         regulator-off-in-suspend;
 705                                 };
 706                         };
 707
 708                         ldo12_reg: LDO12 {
 709                                 regulator-name = "VUOTG_3.0V";
 710                                 regulator-min-microvolt = <3000000>;
 711                                 regulator-max-microvolt = <3000000>;
 712                                 regulator-state-mem {
 713                                         regulator-off-in-suspend;
 714                                 };
 715                         };
 716
 717                         ldo13_reg: LDO13 {
 718                                 regulator-name = "NFC_AVDD_1.8V";
 719                                 regulator-min-microvolt = <1800000>;
 720                                 regulator-max-microvolt = <1800000>;
 721                         };
 722
 723                         ldo14_reg: LDO14 {
 724                                 regulator-name = "VABB2_1.95V";
 725                                 regulator-min-microvolt = <1950000>;
 726                                 regulator-max-microvolt = <1950000>;
 727                                 regulator-always-on;
 728                                 regulator-state-mem {
 729                                         regulator-off-in-suspend;
 730                                 };
 731                         };
 732
 733                         ldo15_reg: LDO15 {
 734                                 regulator-name = "VHSIC_1.0V";
 735                                 regulator-min-microvolt = <1000000>;
 736                                 regulator-max-microvolt = <1000000>;
 737                                 regulator-state-mem {
 738                                         regulator-on-in-suspend;
 739                                 };
 740                         };
 741
 742                         ldo16_reg: LDO16 {
 743                                 regulator-name = "VHSIC_1.8V";
 744                                 regulator-min-microvolt = <1800000>;
 745                                 regulator-max-microvolt = <1800000>;
 746                                 regulator-state-mem {
 747                                         regulator-on-in-suspend;
 748                                 };
 749                         };
 750
 751                         ldo17_reg: LDO17 {
 752                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 753                                 regulator-min-microvolt = <1200000>;
 754                                 regulator-max-microvolt = <1200000>;
 755                         };
 756
 757                         ldo18_reg: LDO18 {
 758                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 759                                 regulator-min-microvolt = <1800000>;
 760                                 regulator-max-microvolt = <1800000>;
 761                         };
 762
 763                         ldo19_reg: LDO19 {
 764                                 regulator-name = "VT_CAM_1.8V";
 765                                 regulator-min-microvolt = <1800000>;
 766                                 regulator-max-microvolt = <1800000>;
 767                         };
 768
 769                         ldo20_reg: LDO20 {
 770                                 regulator-name = "VDDQ_PRE_1.8V";
 771                                 regulator-min-microvolt = <1800000>;
 772                                 regulator-max-microvolt = <1800000>;
 773                         };
 774
 775                         ldo21_reg: LDO21 {
 776                                 regulator-name = "VTF_2.8V";
 777                                 regulator-min-microvolt = <2800000>;
 778                                 regulator-max-microvolt = <2800000>;
 779                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 780                         };
 781
 782                         ldo22_reg: LDO22 {
 783                                 regulator-name = "VMEM_VDD_2.8V";
 784                                 regulator-min-microvolt = <2800000>;
 785                                 regulator-max-microvolt = <2800000>;
 786                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 787                         };
 788
 789                         ldo23_reg: LDO23 {
 790                                 regulator-name = "TSP_AVDD_3.3V";
 791                                 regulator-min-microvolt = <3300000>;
 792                                 regulator-max-microvolt = <3300000>;
 793                         };
 794
 795                         ldo24_reg: LDO24 {
 796                                 regulator-name = "TSP_VDD_1.8V";
 797                                 regulator-min-microvolt = <1800000>;
 798                                 regulator-max-microvolt = <1800000>;
 799                         };
 800
 801                         ldo25_reg: LDO25 {
 802                                 regulator-name = "LCD_VCC_3.3V";
 803                                 regulator-min-microvolt = <2800000>;
 804                                 regulator-max-microvolt = <2800000>;
 805                         };
 806
 807                         ldo26_reg: LDO26 {
 808                                 regulator-name = "MOTOR_VCC_3.0V";
 809                                 regulator-min-microvolt = <3000000>;
 810                                 regulator-max-microvolt = <3000000>;
 811                         };
 812
 813                         buck1_reg: BUCK1 {
 814                                 regulator-name = "vdd_mif";
 815                                 regulator-min-microvolt = <850000>;
 816                                 regulator-max-microvolt = <1100000>;
 817                                 regulator-always-on;
 818                                 regulator-boot-on;
 819                                 regulator-state-mem {
 820                                         regulator-off-in-suspend;
 821                                 };
 822                         };
 823
 824                         buck2_reg: BUCK2 {
 825                                 regulator-name = "vdd_arm";
 826                                 regulator-min-microvolt = <850000>;
 827                                 regulator-max-microvolt = <1500000>;
 828                                 regulator-always-on;
 829                                 regulator-boot-on;
 830                                 regulator-state-mem {
 831                                         regulator-on-in-suspend;
 832                                 };
 833                         };
 834
 835                         buck3_reg: BUCK3 {
 836                                 regulator-name = "vdd_int";
 837                                 regulator-min-microvolt = <850000>;
 838                                 regulator-max-microvolt = <1150000>;
 839                                 regulator-always-on;
 840                                 regulator-boot-on;
 841                                 regulator-state-mem {
 842                                         regulator-off-in-suspend;
 843                                 };
 844                         };
 845
 846                         buck4_reg: BUCK4 {
 847                                 regulator-name = "vdd_g3d";
 848                                 regulator-min-microvolt = <850000>;
 849                                 regulator-max-microvolt = <1150000>;
 850                                 regulator-boot-on;
 851                                 regulator-state-mem {
 852                                         regulator-off-in-suspend;
 853                                 };
 854                         };
 855
 856                         buck5_reg: BUCK5 {
 857                                 regulator-name = "VMEM_1.2V_AP";
 858                                 regulator-min-microvolt = <1200000>;
 859                                 regulator-max-microvolt = <1200000>;
 860                                 regulator-always-on;
 861                         };
 862
 863                         buck6_reg: BUCK6 {
 864                                 regulator-name = "VCC_SUB_1.35V";
 865                                 regulator-min-microvolt = <1350000>;
 866                                 regulator-max-microvolt = <1350000>;
 867                                 regulator-always-on;
 868                         };
 869
 870                         buck7_reg: BUCK7 {
 871                                 regulator-name = "VCC_SUB_2.0V";
 872                                 regulator-min-microvolt = <2000000>;
 873                                 regulator-max-microvolt = <2000000>;
 874                                 regulator-always-on;
 875                         };
 876
 877                         buck8_reg: BUCK8 {
 878                                 regulator-name = "VMEM_VDDF_3.0V";
 879                                 regulator-min-microvolt = <2850000>;
 880                                 regulator-max-microvolt = <2850000>;
 881                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 882                         };
 883
 884                         buck9_reg: BUCK9 {
 885                                 regulator-name = "CAM_ISP_CORE_1.2V";
 886                                 regulator-min-microvolt = <1000000>;
 887                                 regulator-max-microvolt = <1200000>;
 888                                 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
 889                         };
 890                 };
 891         };
 892 };
 893
 894 &i2s0 {
 895         pinctrl-0 = <&i2s0_bus>;
 896         pinctrl-names = "default";
 897         status = "okay";
 898 };
 899
 900 &mshc_0 {
 901         num-slots = <1>;
 902         broken-cd;
 903         non-removable;
 904         card-detect-delay = <200>;
 905         vmmc-supply = <&ldo22_reg>;
 906         clock-frequency = <400000000>;
 907         samsung,dw-mshc-ciu-div = <0>;
 908         samsung,dw-mshc-sdr-timing = <2 3>;
 909         samsung,dw-mshc-ddr-timing = <1 2>;
 910         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 911         pinctrl-names = "default";
 912         status = "okay";
 913         bus-width = <8>;
 914         cap-mmc-highspeed;
 915 };
 916
 917 &pmu_system_controller {
 918         assigned-clocks = <&pmu_system_controller 0>;
 919         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 920 };
 921
 922 &pinctrl_0 {
 923         pinctrl-names = "default";
 924         pinctrl-0 = <&sleep0>;
 925
 926         sleep0: sleep-states {
 927                 PIN_SLP(gpa0-0, INPUT, NONE);
 928                 PIN_SLP(gpa0-1, OUT0, NONE);
 929                 PIN_SLP(gpa0-2, INPUT, NONE);
 930                 PIN_SLP(gpa0-3, INPUT, UP);
 931                 PIN_SLP(gpa0-4, INPUT, NONE);
 932                 PIN_SLP(gpa0-5, INPUT, DOWN);
 933                 PIN_SLP(gpa0-6, INPUT, DOWN);
 934                 PIN_SLP(gpa0-7, INPUT, UP);
 935
 936                 PIN_SLP(gpa1-0, INPUT, DOWN);
 937                 PIN_SLP(gpa1-1, INPUT, DOWN);
 938                 PIN_SLP(gpa1-2, INPUT, DOWN);
 939                 PIN_SLP(gpa1-3, INPUT, DOWN);
 940                 PIN_SLP(gpa1-4, INPUT, DOWN);
 941                 PIN_SLP(gpa1-5, INPUT, DOWN);
 942
 943                 PIN_SLP(gpb-0, INPUT, NONE);
 944                 PIN_SLP(gpb-1, INPUT, NONE);
 945                 PIN_SLP(gpb-2, INPUT, NONE);
 946                 PIN_SLP(gpb-3, INPUT, NONE);
 947                 PIN_SLP(gpb-4, INPUT, DOWN);
 948                 PIN_SLP(gpb-5, INPUT, UP);
 949                 PIN_SLP(gpb-6, INPUT, DOWN);
 950                 PIN_SLP(gpb-7, INPUT, DOWN);
 951
 952                 PIN_SLP(gpc0-0, INPUT, DOWN);
 953                 PIN_SLP(gpc0-1, INPUT, DOWN);
 954                 PIN_SLP(gpc0-2, INPUT, DOWN);
 955                 PIN_SLP(gpc0-3, INPUT, DOWN);
 956                 PIN_SLP(gpc0-4, INPUT, DOWN);
 957
 958                 PIN_SLP(gpc1-0, INPUT, NONE);
 959                 PIN_SLP(gpc1-1, PREV, NONE);
 960                 PIN_SLP(gpc1-2, INPUT, NONE);
 961                 PIN_SLP(gpc1-3, INPUT, NONE);
 962                 PIN_SLP(gpc1-4, INPUT, NONE);
 963
 964                 PIN_SLP(gpd0-0, INPUT, DOWN);
 965                 PIN_SLP(gpd0-1, INPUT, DOWN);
 966                 PIN_SLP(gpd0-2, INPUT, NONE);
 967                 PIN_SLP(gpd0-3, INPUT, NONE);
 968
 969                 PIN_SLP(gpd1-0, INPUT, DOWN);
 970                 PIN_SLP(gpd1-1, INPUT, DOWN);
 971                 PIN_SLP(gpd1-2, INPUT, NONE);
 972                 PIN_SLP(gpd1-3, INPUT, NONE);
 973
 974                 PIN_SLP(gpf0-0, INPUT, NONE);
 975                 PIN_SLP(gpf0-1, INPUT, NONE);
 976                 PIN_SLP(gpf0-2, INPUT, DOWN);
 977                 PIN_SLP(gpf0-3, INPUT, DOWN);
 978                 PIN_SLP(gpf0-4, INPUT, NONE);
 979                 PIN_SLP(gpf0-5, INPUT, DOWN);
 980                 PIN_SLP(gpf0-6, INPUT, NONE);
 981                 PIN_SLP(gpf0-7, INPUT, DOWN);
 982
 983                 PIN_SLP(gpf1-0, INPUT, DOWN);
 984                 PIN_SLP(gpf1-1, INPUT, DOWN);
 985                 PIN_SLP(gpf1-2, INPUT, DOWN);
 986                 PIN_SLP(gpf1-3, INPUT, DOWN);
 987                 PIN_SLP(gpf1-4, INPUT, NONE);
 988                 PIN_SLP(gpf1-5, INPUT, NONE);
 989                 PIN_SLP(gpf1-6, INPUT, DOWN);
 990                 PIN_SLP(gpf1-7, PREV, NONE);
 991
 992                 PIN_SLP(gpf2-0, PREV, NONE);
 993                 PIN_SLP(gpf2-1, INPUT, DOWN);
 994                 PIN_SLP(gpf2-2, INPUT, DOWN);
 995                 PIN_SLP(gpf2-3, INPUT, DOWN);
 996                 PIN_SLP(gpf2-4, INPUT, DOWN);
 997                 PIN_SLP(gpf2-5, INPUT, DOWN);
 998                 PIN_SLP(gpf2-6, INPUT, NONE);
 999                 PIN_SLP(gpf2-7, INPUT, NONE);
1000
1001                 PIN_SLP(gpf3-0, INPUT, NONE);
1002                 PIN_SLP(gpf3-1, PREV, NONE);
1003                 PIN_SLP(gpf3-2, PREV, NONE);
1004                 PIN_SLP(gpf3-3, PREV, NONE);
1005                 PIN_SLP(gpf3-4, OUT1, NONE);
1006                 PIN_SLP(gpf3-5, INPUT, DOWN);
1007
1008                 PIN_SLP(gpj0-0, PREV, NONE);
1009                 PIN_SLP(gpj0-1, PREV, NONE);
1010                 PIN_SLP(gpj0-2, PREV, NONE);
1011                 PIN_SLP(gpj0-3, INPUT, DOWN);
1012                 PIN_SLP(gpj0-4, PREV, NONE);
1013                 PIN_SLP(gpj0-5, PREV, NONE);
1014                 PIN_SLP(gpj0-6, INPUT, DOWN);
1015                 PIN_SLP(gpj0-7, INPUT, DOWN);
1016
1017                 PIN_SLP(gpj1-0, INPUT, DOWN);
1018                 PIN_SLP(gpj1-1, PREV, NONE);
1019                 PIN_SLP(gpj1-2, PREV, NONE);
1020                 PIN_SLP(gpj1-3, INPUT, DOWN);
1021                 PIN_SLP(gpj1-4, INPUT, DOWN);
1022         };
1023 };
1024
1025 &pinctrl_1 {
1026         pinctrl-names = "default";
1027         pinctrl-0 = <&sleep1>;
1028
1029         sleep1: sleep-states {
1030                 PIN_SLP(gpk0-0, PREV, NONE);
1031                 PIN_SLP(gpk0-1, PREV, NONE);
1032                 PIN_SLP(gpk0-2, OUT0, NONE);
1033                 PIN_SLP(gpk0-3, PREV, NONE);
1034                 PIN_SLP(gpk0-4, PREV, NONE);
1035                 PIN_SLP(gpk0-5, PREV, NONE);
1036                 PIN_SLP(gpk0-6, PREV, NONE);
1037
1038                 PIN_SLP(gpk1-0, INPUT, DOWN);
1039                 PIN_SLP(gpk1-1, INPUT, DOWN);
1040                 PIN_SLP(gpk1-2, INPUT, DOWN);
1041                 PIN_SLP(gpk1-3, PREV, NONE);
1042                 PIN_SLP(gpk1-4, PREV, NONE);
1043                 PIN_SLP(gpk1-5, PREV, NONE);
1044                 PIN_SLP(gpk1-6, PREV, NONE);
1045
1046                 PIN_SLP(gpk2-0, INPUT, DOWN);
1047                 PIN_SLP(gpk2-1, INPUT, DOWN);
1048                 PIN_SLP(gpk2-2, INPUT, DOWN);
1049                 PIN_SLP(gpk2-3, INPUT, DOWN);
1050                 PIN_SLP(gpk2-4, INPUT, DOWN);
1051                 PIN_SLP(gpk2-5, INPUT, DOWN);
1052                 PIN_SLP(gpk2-6, INPUT, DOWN);
1053
1054                 PIN_SLP(gpk3-0, OUT0, NONE);
1055                 PIN_SLP(gpk3-1, INPUT, NONE);
1056                 PIN_SLP(gpk3-2, INPUT, DOWN);
1057                 PIN_SLP(gpk3-3, INPUT, NONE);
1058                 PIN_SLP(gpk3-4, INPUT, NONE);
1059                 PIN_SLP(gpk3-5, INPUT, NONE);
1060                 PIN_SLP(gpk3-6, INPUT, NONE);
1061
1062                 PIN_SLP(gpl0-0, INPUT, DOWN);
1063                 PIN_SLP(gpl0-1, INPUT, DOWN);
1064                 PIN_SLP(gpl0-2, INPUT, DOWN);
1065                 PIN_SLP(gpl0-3, INPUT, DOWN);
1066                 PIN_SLP(gpl0-4, PREV, NONE);
1067                 PIN_SLP(gpl0-6, PREV, NONE);
1068
1069                 PIN_SLP(gpl1-0, INPUT, DOWN);
1070                 PIN_SLP(gpl1-1, INPUT, DOWN);
1071                 PIN_SLP(gpl2-0, INPUT, DOWN);
1072                 PIN_SLP(gpl2-1, INPUT, DOWN);
1073                 PIN_SLP(gpl2-2, INPUT, DOWN);
1074                 PIN_SLP(gpl2-3, INPUT, DOWN);
1075                 PIN_SLP(gpl2-4, INPUT, DOWN);
1076                 PIN_SLP(gpl2-5, INPUT, DOWN);
1077                 PIN_SLP(gpl2-6, PREV, NONE);
1078                 PIN_SLP(gpl2-7, INPUT, DOWN);
1079
1080                 PIN_SLP(gpm0-0, INPUT, DOWN);
1081                 PIN_SLP(gpm0-1, INPUT, DOWN);
1082                 PIN_SLP(gpm0-2, INPUT, DOWN);
1083                 PIN_SLP(gpm0-3, INPUT, DOWN);
1084                 PIN_SLP(gpm0-4, INPUT, DOWN);
1085                 PIN_SLP(gpm0-5, INPUT, DOWN);
1086                 PIN_SLP(gpm0-6, INPUT, DOWN);
1087                 PIN_SLP(gpm0-7, INPUT, DOWN);
1088
1089                 PIN_SLP(gpm1-0, INPUT, DOWN);
1090                 PIN_SLP(gpm1-1, INPUT, DOWN);
1091                 PIN_SLP(gpm1-2, INPUT, NONE);
1092                 PIN_SLP(gpm1-3, INPUT, NONE);
1093                 PIN_SLP(gpm1-4, INPUT, NONE);
1094                 PIN_SLP(gpm1-5, INPUT, NONE);
1095                 PIN_SLP(gpm1-6, INPUT, DOWN);
1096
1097                 PIN_SLP(gpm2-0, INPUT, NONE);
1098                 PIN_SLP(gpm2-1, INPUT, NONE);
1099                 PIN_SLP(gpm2-2, INPUT, DOWN);
1100                 PIN_SLP(gpm2-3, INPUT, DOWN);
1101                 PIN_SLP(gpm2-4, INPUT, DOWN);
1102
1103                 PIN_SLP(gpm3-0, PREV, NONE);
1104                 PIN_SLP(gpm3-1, PREV, NONE);
1105                 PIN_SLP(gpm3-2, PREV, NONE);
1106                 PIN_SLP(gpm3-3, OUT1, NONE);
1107                 PIN_SLP(gpm3-4, INPUT, DOWN);
1108                 PIN_SLP(gpm3-5, INPUT, DOWN);
1109                 PIN_SLP(gpm3-6, INPUT, DOWN);
1110                 PIN_SLP(gpm3-7, INPUT, DOWN);
1111
1112                 PIN_SLP(gpm4-0, INPUT, DOWN);
1113                 PIN_SLP(gpm4-1, INPUT, DOWN);
1114                 PIN_SLP(gpm4-2, INPUT, DOWN);
1115                 PIN_SLP(gpm4-3, INPUT, DOWN);
1116                 PIN_SLP(gpm4-4, INPUT, DOWN);
1117                 PIN_SLP(gpm4-5, INPUT, DOWN);
1118                 PIN_SLP(gpm4-6, INPUT, DOWN);
1119                 PIN_SLP(gpm4-7, INPUT, DOWN);
1120
1121                 PIN_SLP(gpy0-0, INPUT, DOWN);
1122                 PIN_SLP(gpy0-1, INPUT, DOWN);
1123                 PIN_SLP(gpy0-2, INPUT, DOWN);
1124                 PIN_SLP(gpy0-3, INPUT, DOWN);
1125                 PIN_SLP(gpy0-4, INPUT, DOWN);
1126                 PIN_SLP(gpy0-5, INPUT, DOWN);
1127
1128                 PIN_SLP(gpy1-0, INPUT, DOWN);
1129                 PIN_SLP(gpy1-1, INPUT, DOWN);
1130                 PIN_SLP(gpy1-2, INPUT, DOWN);
1131                 PIN_SLP(gpy1-3, INPUT, DOWN);
1132
1133                 PIN_SLP(gpy2-0, PREV, NONE);
1134                 PIN_SLP(gpy2-1, INPUT, DOWN);
1135                 PIN_SLP(gpy2-2, INPUT, NONE);
1136                 PIN_SLP(gpy2-3, INPUT, NONE);
1137                 PIN_SLP(gpy2-4, INPUT, NONE);
1138                 PIN_SLP(gpy2-5, INPUT, NONE);
1139
1140                 PIN_SLP(gpy3-0, INPUT, DOWN);
1141                 PIN_SLP(gpy3-1, INPUT, DOWN);
1142                 PIN_SLP(gpy3-2, INPUT, DOWN);
1143                 PIN_SLP(gpy3-3, INPUT, DOWN);
1144                 PIN_SLP(gpy3-4, INPUT, DOWN);
1145                 PIN_SLP(gpy3-5, INPUT, DOWN);
1146                 PIN_SLP(gpy3-6, INPUT, DOWN);
1147                 PIN_SLP(gpy3-7, INPUT, DOWN);
1148
1149                 PIN_SLP(gpy4-0, INPUT, DOWN);
1150                 PIN_SLP(gpy4-1, INPUT, DOWN);
1151                 PIN_SLP(gpy4-2, INPUT, DOWN);
1152                 PIN_SLP(gpy4-3, INPUT, DOWN);
1153                 PIN_SLP(gpy4-4, INPUT, DOWN);
1154                 PIN_SLP(gpy4-5, INPUT, DOWN);
1155                 PIN_SLP(gpy4-6, INPUT, DOWN);
1156                 PIN_SLP(gpy4-7, INPUT, DOWN);
1157
1158                 PIN_SLP(gpy5-0, INPUT, DOWN);
1159                 PIN_SLP(gpy5-1, INPUT, DOWN);
1160                 PIN_SLP(gpy5-2, INPUT, DOWN);
1161                 PIN_SLP(gpy5-3, INPUT, DOWN);
1162                 PIN_SLP(gpy5-4, INPUT, DOWN);
1163                 PIN_SLP(gpy5-5, INPUT, DOWN);
1164                 PIN_SLP(gpy5-6, INPUT, DOWN);
1165                 PIN_SLP(gpy5-7, INPUT, DOWN);
1166
1167                 PIN_SLP(gpy6-0, INPUT, DOWN);
1168                 PIN_SLP(gpy6-1, INPUT, DOWN);
1169                 PIN_SLP(gpy6-2, INPUT, DOWN);
1170                 PIN_SLP(gpy6-3, INPUT, DOWN);
1171                 PIN_SLP(gpy6-4, INPUT, DOWN);
1172                 PIN_SLP(gpy6-5, INPUT, DOWN);
1173                 PIN_SLP(gpy6-6, INPUT, DOWN);
1174                 PIN_SLP(gpy6-7, INPUT, DOWN);
1175         };
1176 };
1177
1178 &pinctrl_2 {
1179         pinctrl-names = "default";
1180         pinctrl-0 = <&sleep2>;
1181
1182         sleep2: sleep-states {
1183                 PIN_SLP(gpz-0, INPUT, DOWN);
1184                 PIN_SLP(gpz-1, INPUT, DOWN);
1185                 PIN_SLP(gpz-2, INPUT, DOWN);
1186                 PIN_SLP(gpz-3, INPUT, DOWN);
1187                 PIN_SLP(gpz-4, INPUT, DOWN);
1188                 PIN_SLP(gpz-5, INPUT, DOWN);
1189                 PIN_SLP(gpz-6, INPUT, DOWN);
1190         };
1191 };
1192
1193 &pinctrl_3 {
1194         pinctrl-names = "default";
1195         pinctrl-0 = <&sleep3>;
1196
1197         sleep3: sleep-states {
1198                 PIN_SLP(gpv0-0, INPUT, DOWN);
1199                 PIN_SLP(gpv0-1, INPUT, DOWN);
1200                 PIN_SLP(gpv0-2, INPUT, DOWN);
1201                 PIN_SLP(gpv0-3, INPUT, DOWN);
1202                 PIN_SLP(gpv0-4, INPUT, DOWN);
1203                 PIN_SLP(gpv0-5, INPUT, DOWN);
1204                 PIN_SLP(gpv0-6, INPUT, DOWN);
1205                 PIN_SLP(gpv0-7, INPUT, DOWN);
1206
1207                 PIN_SLP(gpv1-0, INPUT, DOWN);
1208                 PIN_SLP(gpv1-1, INPUT, DOWN);
1209                 PIN_SLP(gpv1-2, INPUT, DOWN);
1210                 PIN_SLP(gpv1-3, INPUT, DOWN);
1211                 PIN_SLP(gpv1-4, INPUT, DOWN);
1212                 PIN_SLP(gpv1-5, INPUT, DOWN);
1213                 PIN_SLP(gpv1-6, INPUT, DOWN);
1214                 PIN_SLP(gpv1-7, INPUT, DOWN);
1215
1216                 PIN_SLP(gpv2-0, INPUT, DOWN);
1217                 PIN_SLP(gpv2-1, INPUT, DOWN);
1218                 PIN_SLP(gpv2-2, INPUT, DOWN);
1219                 PIN_SLP(gpv2-3, INPUT, DOWN);
1220                 PIN_SLP(gpv2-4, INPUT, DOWN);
1221                 PIN_SLP(gpv2-5, INPUT, DOWN);
1222                 PIN_SLP(gpv2-6, INPUT, DOWN);
1223                 PIN_SLP(gpv2-7, INPUT, DOWN);
1224
1225                 PIN_SLP(gpv3-0, INPUT, DOWN);
1226                 PIN_SLP(gpv3-1, INPUT, DOWN);
1227                 PIN_SLP(gpv3-2, INPUT, DOWN);
1228                 PIN_SLP(gpv3-3, INPUT, DOWN);
1229                 PIN_SLP(gpv3-4, INPUT, DOWN);
1230                 PIN_SLP(gpv3-5, INPUT, DOWN);
1231                 PIN_SLP(gpv3-6, INPUT, DOWN);
1232                 PIN_SLP(gpv3-7, INPUT, DOWN);
1233
1234                 PIN_SLP(gpv4-0, INPUT, DOWN);
1235         };
1236 };
1237
1238 &pwm {
1239         pinctrl-0 = <&pwm0_out>;
1240         pinctrl-names = "default";
1241         samsung,pwm-outputs = <0>;
1242         status = "okay";
1243 };
1244
1245 &rtc {
1246         status = "okay";
1247         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1248         clock-names = "rtc", "rtc_src";
1249 };
1250
1251 &sdhci_2 {
1252         bus-width = <4>;
1253         cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1254         cd-inverted;
1255         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1256         pinctrl-names = "default";
1257         vmmc-supply = <&ldo21_reg>;
1258         status = "okay";
1259 };
1260
1261 &serial_0 {
1262         status = "okay";
1263 };
1264
1265 &serial_1 {
1266         status = "okay";
1267 };
1268
1269 &serial_2 {
1270         status = "okay";
1271 };
1272
1273 &serial_3 {
1274         status = "okay";
1275 };
1276
1277 &spi_1 {
1278         pinctrl-names = "default";
1279         pinctrl-0 = <&spi1_bus>;
1280         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1281         status = "okay";
1282
1283         s5c73m3_spi: s5c73m3@0 {
1284                 compatible = "samsung,s5c73m3";
1285                 spi-max-frequency = <50000000>;
1286                 reg = <0>;
1287                 controller-data {
1288                         samsung,spi-feedback-delay = <2>;
1289                 };
1290         };
1291 };
1292
1293 &tmu {
1294         vtmu-supply = <&ldo10_reg>;
1295         status = "okay";
1296 };