Merge remote-tracking branch 'mmc-uh/next'
[deliverable/linux.git] / arch / arm / boot / dts / exynos5260-xyref5260.dts
1 /*
2 * SAMSUNG XYREF5260 board device tree source
3 *
4 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12 /dts-v1/;
13 #include "exynos5260.dtsi"
14
15 / {
16 model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
17 compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
18
19 memory@20000000 {
20 device_type = "memory";
21 reg = <0x20000000 0x80000000>;
22 };
23
24 chosen {
25 bootargs = "console=ttySAC2,115200";
26 };
27
28 fin_pll: xxti {
29 compatible = "fixed-clock";
30 clock-frequency = <24000000>;
31 clock-output-names = "fin_pll";
32 #clock-cells = <0>;
33 };
34
35 xrtcxti: xrtcxti {
36 compatible = "fixed-clock";
37 clock-frequency = <32768>;
38 clock-output-names = "xrtcxti";
39 #clock-cells = <0>;
40 };
41 };
42
43 &pinctrl_0 {
44 hdmi_hpd_irq: hdmi-hpd-irq {
45 samsung,pins = "gpx3-7";
46 samsung,pin-function = <0>;
47 samsung,pin-pud = <1>;
48 samsung,pin-drv = <0>;
49 };
50 };
51
52 &uart0 {
53 status = "okay";
54 };
55
56 &uart1 {
57 status = "okay";
58 };
59
60 &uart2 {
61 status = "okay";
62 };
63
64 &uart3 {
65 status = "okay";
66 };
67
68 &mmc_0 {
69 status = "okay";
70 num-slots = <1>;
71 broken-cd;
72 bypass-smu;
73 cap-mmc-highspeed;
74 supports-hs200-mode; /* 200 MHz */
75 card-detect-delay = <200>;
76 samsung,dw-mshc-ciu-div = <3>;
77 samsung,dw-mshc-sdr-timing = <0 4>;
78 samsung,dw-mshc-ddr-timing = <0 2>;
79 pinctrl-names = "default";
80 pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
81 bus-width = <8>;
82 };
83
84 &mmc_2 {
85 status = "okay";
86 num-slots = <1>;
87 cap-sd-highspeed;
88 card-detect-delay = <200>;
89 samsung,dw-mshc-ciu-div = <3>;
90 samsung,dw-mshc-sdr-timing = <2 3>;
91 samsung,dw-mshc-ddr-timing = <1 2>;
92 pinctrl-names = "default";
93 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
94 bus-width = <4>;
95 disable-wp;
96 };
This page took 0.103305 seconds and 5 git commands to generate.