arch/arm/boot/dts/imx6q-tbs2910.dts

   1 /*
   2  * Copyright 2014 Soeren Moch <smoch@web.de>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of
  12  *     the License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  *     You should have received a copy of the GNU General Public
  20  *     License along with this file; if not, write to the Free
  21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22  *     MA 02110-1301 USA
  23  *
  24  * Or, alternatively,
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use,
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 /dts-v1/;
  49
  50 #include "imx6q.dtsi"
  51 #include <dt-bindings/gpio/gpio.h>
  52 #include <dt-bindings/input/input.h>
  53
  54 / {
  55         model = "TBS2910 Matrix ARM mini PC";
  56         compatible = "tbs,imx6q-tbs2910", "fsl,imx6q";
  57
  58         chosen {
  59                 stdout-path = &uart1;
  60         };
  61
  62         memory {
  63                 reg = <0x10000000 0x80000000>;
  64         };
  65
  66         fan {
  67                 compatible = "gpio-fan";
  68                 pinctrl-names = "default";
  69                 pinctrl-0 = <&pinctrl_gpio_fan>;
  70                 gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
  71                 gpio-fan,speed-map = <0    0
  72                                       3000 1>;
  73         };
  74
  75         ir_recv {
  76                 compatible = "gpio-ir-receiver";
  77                 gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
  78                 pinctrl-names = "default";
  79                 pinctrl-0 = <&pinctrl_ir>;
  80         };
  81
  82         leds {
  83                 compatible = "gpio-leds";
  84                 pinctrl-names = "default";
  85                 pinctrl-0 = <&pinctrl_gpio_leds>;
  86
  87                 blue {
  88                         label = "blue_status_led";
  89                         gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
  90                         default-state = "keep";
  91                 };
  92         };
  93
  94         reg_2p5v: regulator-2p5v {
  95                 compatible = "regulator-fixed";
  96                 regulator-name = "2P5V";
  97                 regulator-min-microvolt = <2500000>;
  98                 regulator-max-microvolt = <2500000>;
  99         };
 100
 101         reg_3p3v: regulator-3p3v {
 102                 compatible = "regulator-fixed";
 103                 regulator-name = "3P3V";
 104                 regulator-min-microvolt = <3300000>;
 105                 regulator-max-microvolt = <3300000>;
 106         };
 107
 108         reg_5p0v: regulator-5p0v {
 109                 compatible = "regulator-fixed";
 110                 regulator-name = "5P0V";
 111                 regulator-min-microvolt = <5000000>;
 112                 regulator-max-microvolt = <5000000>;
 113         };
 114
 115         sound-sgtl5000 {
 116                 audio-codec = <&sgtl5000>;
 117                 audio-routing =
 118                         "MIC_IN", "Mic Jack",
 119                         "Mic Jack", "Mic Bias",
 120                         "Headphone Jack", "HP_OUT";
 121                 compatible = "fsl,imx-audio-sgtl5000";
 122                 model = "On-board Codec";
 123                 mux-ext-port = <3>;
 124                 mux-int-port = <1>;
 125                 ssi-controller = <&ssi1>;
 126         };
 127
 128         sound-spdif {
 129                 compatible = "fsl,imx-audio-spdif";
 130                 model = "On-board SPDIF";
 131                 spdif-controller = <&spdif>;
 132                 spdif-out;
 133         };
 134 };
 135
 136 &audmux {
 137         status = "okay";
 138 };
 139
 140 &fec {
 141         pinctrl-names = "default";
 142         pinctrl-0 = <&pinctrl_enet>;
 143         phy-mode = "rgmii";
 144         phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 145         status = "okay";
 146 };
 147
 148 &hdmi {
 149         pinctrl-names = "default";
 150         pinctrl-0 = <&pinctrl_hdmi>;
 151         ddc-i2c-bus = <&i2c2>;
 152         status = "okay";
 153 };
 154
 155 &i2c1 {
 156         clock-frequency = <100000>;
 157         pinctrl-names = "default";
 158         pinctrl-0 = <&pinctrl_i2c1>;
 159         status = "okay";
 160
 161         sgtl5000: sgtl5000@0a {
 162                 clocks = <&clks IMX6QDL_CLK_CKO>;
 163                 compatible = "fsl,sgtl5000";
 164                 pinctrl-names = "default";
 165                 pinctrl-0 = <&pinctrl_sgtl5000>;
 166                 reg = <0x0a>;
 167                 VDDA-supply = <&reg_2p5v>;
 168                 VDDIO-supply = <&reg_3p3v>;
 169         };
 170 };
 171
 172 &i2c2 {
 173         clock-frequency = <100000>;
 174         pinctrl-names = "default";
 175         pinctrl-0 = <&pinctrl_i2c2>;
 176         status = "okay";
 177 };
 178
 179 &i2c3 {
 180         clock-frequency = <100000>;
 181         pinctrl-names = "default";
 182         pinctrl-0 = <&pinctrl_i2c3>;
 183         status = "okay";
 184
 185         rtc: ds1307@68 {
 186                 compatible = "dallas,ds1307";
 187                 reg = <0x68>;
 188         };
 189 };
 190
 191 &pcie {
 192         pinctrl-names = "default";
 193         pinctrl-0 = <&pinctrl_pcie>;
 194         reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
 195         status = "okay";
 196 };
 197
 198 &sata {
 199         fsl,transmit-level-mV = <1104>;
 200         fsl,transmit-boost-mdB = <3330>;
 201         fsl,transmit-atten-16ths = <16>;
 202         fsl,receive-eq-mdB = <3000>;
 203         status = "okay";
 204 };
 205
 206 &snvs_poweroff {
 207         status = "okay";
 208 };
 209
 210 &spdif {
 211         pinctrl-names = "default";
 212         pinctrl-0 = <&pinctrl_spdif>;
 213         status = "okay";
 214 };
 215
 216 &ssi1 {
 217         status = "okay";
 218 };
 219
 220 &uart1 {
 221         pinctrl-names = "default";
 222         pinctrl-0 = <&pinctrl_uart1>;
 223         status = "okay";
 224 };
 225
 226 &uart2 {
 227         pinctrl-names = "default";
 228         pinctrl-0 = <&pinctrl_uart2>;
 229         status = "okay";
 230 };
 231
 232 &usbh1 {
 233         vbus-supply = <&reg_5p0v>;
 234         status = "okay";
 235 };
 236
 237 &usbotg {
 238         vbus-supply = <&reg_5p0v>;
 239         pinctrl-names = "default";
 240         pinctrl-0 = <&pinctrl_usbotg>;
 241         disable-over-current;
 242         status = "okay";
 243 };
 244
 245 &usdhc2 {
 246         pinctrl-names = "default";
 247         pinctrl-0 = <&pinctrl_usdhc2>;
 248         bus-width = <4>;
 249         cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 250         vmmc-supply = <&reg_3p3v>;
 251         vqmmc-supply = <&reg_3p3v>;
 252         voltage-ranges = <3300 3300>;
 253         no-1-8-v;
 254         status = "okay";
 255 };
 256
 257 &usdhc3 {
 258         pinctrl-names = "default";
 259         pinctrl-0 = <&pinctrl_usdhc3>;
 260         bus-width = <4>;
 261         cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 262         wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 263         vmmc-supply = <&reg_3p3v>;
 264         vqmmc-supply = <&reg_3p3v>;
 265         voltage-ranges = <3300 3300>;
 266         no-1-8-v;
 267         status = "okay";
 268 };
 269
 270 &usdhc4 {
 271         pinctrl-names = "default";
 272         pinctrl-0 = <&pinctrl_usdhc4>;
 273         bus-width = <8>;
 274         vmmc-supply = <&reg_3p3v>;
 275         vqmmc-supply = <&reg_3p3v>;
 276         voltage-ranges = <3300 3300>;
 277         non-removable;
 278         no-1-8-v;
 279         status = "okay";
 280 };
 281
 282 &iomuxc {
 283         pinctrl_enet: enetgrp {
 284                 fsl,pins = <
 285                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 286                         MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
 287                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
 288                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
 289                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
 290                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
 291                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
 292                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
 293                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
 294                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
 295                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
 296                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
 297                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
 298                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
 299                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
 300                         MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
 301                         MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
 302                 >;
 303         };
 304
 305         pinctrl_gpio_fan: gpiofangrp {
 306                 fsl,pins = <
 307                         MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
 308                 >;
 309         };
 310
 311         pinctrl_gpio_leds: gpioledsgrp {
 312                 fsl,pins = <
 313                         MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
 314                 >;
 315         };
 316
 317         pinctrl_hdmi: hdmigrp {
 318                 fsl,pins = <
 319                         MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
 320                 >;
 321         };
 322
 323         pinctrl_i2c1: i2c1grp {
 324                 fsl,pins = <
 325                         MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
 326                         MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
 327                 >;
 328         };
 329
 330         pinctrl_i2c2: i2c2grp {
 331                 fsl,pins = <
 332                         MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
 333                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
 334                 >;
 335         };
 336
 337         pinctrl_i2c3: i2c3grp {
 338                 fsl,pins = <
 339                         MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
 340                         MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
 341                 >;
 342         };
 343
 344         pinctrl_ir: irgrp {
 345                 fsl,pins = <
 346                         MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
 347                 >;
 348         };
 349
 350         pinctrl_pcie: pciegrp {
 351                 fsl,pins = <
 352                         MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
 353                 >;
 354         };
 355
 356         pinctrl_sgtl5000: sgtl5000grp {
 357                 fsl,pins = <
 358                         MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
 359                         MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
 360                         MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
 361                         MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
 362                         MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
 363                 >;
 364         };
 365
 366         pinctrl_spdif: spdifgrp {
 367                 fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
 368                 >;
 369         };
 370
 371         pinctrl_uart1: uart1grp {
 372                 fsl,pins = <
 373                         MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
 374                         MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
 375                 >;
 376         };
 377
 378         pinctrl_uart2: uart2grp {
 379                 fsl,pins = <
 380                         MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
 381                         MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
 382                 >;
 383         };
 384
 385         pinctrl_usbotg: usbotggrp {
 386                 fsl,pins = <
 387                         MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
 388                 >;
 389         };
 390
 391         pinctrl_usdhc2: usdhc2grp {
 392                 fsl,pins = <
 393                         MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
 394                         MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
 395                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
 396                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
 397                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
 398                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
 399                         MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
 400                 >;
 401         };
 402
 403         pinctrl_usdhc3: usdhc3grp {
 404                 fsl,pins = <
 405                         MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
 406                         MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
 407                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
 408                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
 409                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
 410                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
 411                         MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
 412                         MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
 413                 >;
 414         };
 415
 416         pinctrl_usdhc4: usdhc4grp {
 417                 fsl,pins = <
 418                         MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
 419                         MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
 420                         MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
 421                         MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
 422                         MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
 423                         MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
 424                         MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
 425                         MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
 426                         MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
 427                         MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
 428                 >;
 429         };
 430 };