Merge remote-tracking branch 'keys/keys-next'
[deliverable/linux.git] / arch / arm / boot / dts / imx6qdl-gw553x.dtsi
1 /*
2 * Copyright 2016 Gateworks Corporation
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48 #include <dt-bindings/gpio/gpio.h>
49
50 / {
51 /* these are used by bootloader for disabling nodes */
52 aliases {
53 led0 = &led0;
54 led1 = &led1;
55 nand = &gpmi;
56 usb0 = &usbh1;
57 usb1 = &usbotg;
58 };
59
60 chosen {
61 stdout-path = &uart2;
62 };
63
64 leds {
65 compatible = "gpio-leds";
66 pinctrl-names = "default";
67 pinctrl-0 = <&pinctrl_gpio_leds>;
68
69 led0: user1 {
70 label = "user1";
71 gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
72 default-state = "on";
73 linux,default-trigger = "heartbeat";
74 };
75
76 led1: user2 {
77 label = "user2";
78 gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
79 default-state = "off";
80 };
81 };
82
83 memory {
84 reg = <0x10000000 0x20000000>;
85 };
86
87 pps {
88 compatible = "pps-gpio";
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_pps>;
91 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
92 status = "okay";
93 };
94
95 reg_3p3v: regulator-3p3v {
96 compatible = "regulator-fixed";
97 regulator-name = "3P0V";
98 regulator-min-microvolt = <3300000>;
99 regulator-max-microvolt = <3300000>;
100 regulator-always-on;
101 };
102
103 reg_5p0v: regulator-5p0v {
104 compatible = "regulator-fixed";
105 regulator-name = "5P0V";
106 regulator-min-microvolt = <5000000>;
107 regulator-max-microvolt = <5000000>;
108 regulator-always-on;
109 };
110
111 reg_usb_otg_vbus: regulator-usb-otg-vbus {
112 compatible = "regulator-fixed";
113 regulator-name = "usb_otg_vbus";
114 regulator-min-microvolt = <5000000>;
115 regulator-max-microvolt = <5000000>;
116 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
117 enable-active-high;
118 };
119 };
120
121 &gpmi {
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_gpmi_nand>;
124 status = "okay";
125 };
126
127 &hdmi {
128 pinctrl-names = "default";
129 pinctrl-0 = <&pinctrl_hdmi>;
130 ddc-i2c-bus = <&i2c3>;
131 status = "okay";
132 };
133
134 &i2c1 {
135 clock-frequency = <100000>;
136 pinctrl-names = "default";
137 pinctrl-0 = <&pinctrl_i2c1>;
138 status = "okay";
139
140 gpio: pca9555@23 {
141 compatible = "nxp,pca9555";
142 reg = <0x23>;
143 gpio-controller;
144 #gpio-cells = <2>;
145 };
146
147 eeprom1: eeprom@50 {
148 compatible = "atmel,24c02";
149 reg = <0x50>;
150 pagesize = <16>;
151 };
152
153 eeprom2: eeprom@51 {
154 compatible = "atmel,24c02";
155 reg = <0x51>;
156 pagesize = <16>;
157 };
158
159 eeprom3: eeprom@52 {
160 compatible = "atmel,24c02";
161 reg = <0x52>;
162 pagesize = <16>;
163 };
164
165 eeprom4: eeprom@53 {
166 compatible = "atmel,24c02";
167 reg = <0x53>;
168 pagesize = <16>;
169 };
170
171 rtc: ds1672@68 {
172 compatible = "dallas,ds1672";
173 reg = <0x68>;
174 };
175 };
176
177 &i2c2 {
178 clock-frequency = <100000>;
179 pinctrl-names = "default";
180 pinctrl-0 = <&pinctrl_i2c2>;
181 status = "okay";
182 };
183
184 &i2c3 {
185 clock-frequency = <100000>;
186 pinctrl-names = "default";
187 pinctrl-0 = <&pinctrl_i2c3>;
188 status = "okay";
189 };
190
191 &pcie {
192 pinctrl-names = "default";
193 pinctrl-0 = <&pinctrl_pcie>;
194 reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
195 status = "okay";
196 };
197
198 &pwm2 {
199 pinctrl-names = "default";
200 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
201 status = "disabled";
202 };
203
204 &pwm3 {
205 pinctrl-names = "default";
206 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
207 status = "disabled";
208 };
209
210 &pwm4 {
211 pinctrl-names = "default";
212 pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
213 status = "disabled";
214 };
215
216 &uart2 {
217 pinctrl-names = "default";
218 pinctrl-0 = <&pinctrl_uart2>;
219 status = "okay";
220 };
221
222 &uart3 {
223 pinctrl-names = "default";
224 pinctrl-0 = <&pinctrl_uart3>;
225 status = "okay";
226 };
227
228 &uart4 {
229 pinctrl-names = "default";
230 pinctrl-0 = <&pinctrl_uart4>;
231 status = "okay";
232 };
233
234 &uart5 {
235 pinctrl-names = "default";
236 pinctrl-0 = <&pinctrl_uart5>;
237 status = "okay";
238 };
239
240 &usbh1 {
241 status = "okay";
242 };
243
244 &usbotg {
245 vbus-supply = <&reg_usb_otg_vbus>;
246 pinctrl-names = "default";
247 pinctrl-0 = <&pinctrl_usbotg>;
248 disable-over-current;
249 status = "okay";
250 };
251
252 &usdhc3 {
253 pinctrl-names = "default", "state_100mhz", "state_200mhz";
254 pinctrl-0 = <&pinctrl_usdhc3>;
255 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
256 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
257 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
258 vmmc-supply = <&reg_3p3v>;
259 status = "okay";
260 };
261
262 &wdog1 {
263 pinctrl-names = "default";
264 pinctrl-0 = <&pinctrl_wdog>;
265 fsl,ext-reset-output;
266 };
267
268 &iomuxc {
269 pinctrl_gpmi_nand: gpminandgrp {
270 fsl,pins = <
271 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
272 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
273 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
274 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
275 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
276 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
277 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
278 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
279 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
280 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
281 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
282 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
283 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
284 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
285 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
286 >;
287 };
288
289 pinctrl_hdmi: hdmigrp {
290 fsl,pins = <
291 MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
292 >;
293 };
294
295 pinctrl_i2c1: i2c1grp {
296 fsl,pins = <
297 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
298 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
299 >;
300 };
301
302 pinctrl_i2c2: i2c2grp {
303 fsl,pins = <
304 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
305 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
306 >;
307 };
308
309 pinctrl_i2c3: i2c3grp {
310 fsl,pins = <
311 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
312 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
313 >;
314 };
315
316 pinctrl_gpio_leds: gpioledsgrp {
317 fsl,pins = <
318 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
319 MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
320 >;
321 };
322
323 pinctrl_pcie: pciegrp {
324 fsl,pins = <
325 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
326 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */
327 >;
328 };
329
330 pinctrl_pps: ppsgrp {
331 fsl,pins = <
332 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
333 >;
334 };
335
336 pinctrl_pwm2: pwm2grp {
337 fsl,pins = <
338 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
339 >;
340 };
341
342 pinctrl_pwm3: pwm3grp {
343 fsl,pins = <
344 MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
345 >;
346 };
347
348 pinctrl_pwm4: pwm4grp {
349 fsl,pins = <
350 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
351 >;
352 };
353
354 pinctrl_uart2: uart2grp {
355 fsl,pins = <
356 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
357 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
358 >;
359 };
360
361 pinctrl_uart3: uart3grp {
362 fsl,pins = <
363 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
364 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
365 >;
366 };
367
368 pinctrl_uart4: uart4grp {
369 fsl,pins = <
370 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
371 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
372 >;
373 };
374
375 pinctrl_uart5: uart5grp {
376 fsl,pins = <
377 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
378 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
379 >;
380 };
381
382 pinctrl_usbotg: usbotggrp {
383 fsl,pins = <
384 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
385 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
386 >;
387 };
388
389 pinctrl_usdhc3: usdhc3grp {
390 fsl,pins = <
391 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
392 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
393 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
394 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
395 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
396 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
397 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
398 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
399 >;
400 };
401
402 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
403 fsl,pins = <
404 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
405 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
406 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
407 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
408 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
409 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
410 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
411 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
412 >;
413 };
414
415 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
416 fsl,pins = <
417 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
418 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
419 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
420 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
421 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
422 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
423 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
424 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
425 >;
426 };
427
428 pinctrl_wdog: wdoggrp {
429 fsl,pins = <
430 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
431 >;
432 };
433 };
This page took 0.041528 seconds and 5 git commands to generate.