arch/arm/boot/dts/imx6qdl-wandboard.dtsi

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Author: Fabio Estevam <fabio.estevam@freescale.com>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13
  14 / {
  15         regulators {
  16                 compatible = "simple-bus";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19
  20                 reg_2p5v: regulator@0 {
  21                         compatible = "regulator-fixed";
  22                         reg = <0>;
  23                         regulator-name = "2P5V";
  24                         regulator-min-microvolt = <2500000>;
  25                         regulator-max-microvolt = <2500000>;
  26                         regulator-always-on;
  27                 };
  28
  29                 reg_3p3v: regulator@1 {
  30                         compatible = "regulator-fixed";
  31                         reg = <1>;
  32                         regulator-name = "3P3V";
  33                         regulator-min-microvolt = <3300000>;
  34                         regulator-max-microvolt = <3300000>;
  35                         regulator-always-on;
  36                 };
  37         };
  38
  39         sound {
  40                 compatible = "fsl,imx6-wandboard-sgtl5000",
  41                              "fsl,imx-audio-sgtl5000";
  42                 model = "imx6-wandboard-sgtl5000";
  43                 ssi-controller = <&ssi1>;
  44                 audio-codec = <&codec>;
  45                 audio-routing =
  46                         "MIC_IN", "Mic Jack",
  47                         "Mic Jack", "Mic Bias",
  48                         "Headphone Jack", "HP_OUT";
  49                 mux-int-port = <1>;
  50                 mux-ext-port = <3>;
  51         };
  52
  53         sound-spdif {
  54                 compatible = "fsl,imx-audio-spdif";
  55                 model = "imx-spdif";
  56                 spdif-controller = <&spdif>;
  57                 spdif-out;
  58         };
  59 };
  60
  61 &audmux {
  62         pinctrl-names = "default";
  63         pinctrl-0 = <&pinctrl_audmux>;
  64         status = "okay";
  65 };
  66
  67 &hdmi {
  68         ddc-i2c-bus = <&i2c1>;
  69         status = "okay";
  70 };
  71
  72 &i2c1 {
  73         clock-frequency = <100000>;
  74         pinctrl-names = "default";
  75         pinctrl-0 = <&pinctrl_i2c1>;
  76         status = "okay";
  77 };
  78
  79 &i2c2 {
  80         clock-frequency = <100000>;
  81         pinctrl-names = "default";
  82         pinctrl-0 = <&pinctrl_i2c2>;
  83         status = "okay";
  84
  85         codec: sgtl5000@0a {
  86                 compatible = "fsl,sgtl5000";
  87                 reg = <0x0a>;
  88                 clocks = <&clks IMX6QDL_CLK_CKO>;
  89                 VDDA-supply = <&reg_2p5v>;
  90                 VDDIO-supply = <&reg_3p3v>;
  91         };
  92 };
  93
  94 &iomuxc {
  95         pinctrl-names = "default";
  96
  97         imx6qdl-wandboard {
  98
  99                 pinctrl_audmux: audmuxgrp {
 100                         fsl,pins = <
 101                                 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
 102                                 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
 103                                 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
 104                                 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
 105                         >;
 106                 };
 107
 108                 pinctrl_enet: enetgrp {
 109                         fsl,pins = <
 110                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 111                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 112                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b0b0
 113                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b0b0
 114                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b0b0
 115                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b0b0
 116                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b0b0
 117                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b0b0
 118                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 119                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b0b0
 120                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b0b0
 121                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b0b0
 122                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b0b0
 123                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b0b0
 124                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
 125                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 126                                 MX6QDL_PAD_GPIO_6__ENET_IRQ             0x000b1
 127                         >;
 128                 };
 129
 130                 pinctrl_i2c1: i2c1grp {
 131                         fsl,pins = <
 132                                 MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 133                                 MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 134                         >;
 135                 };
 136
 137                 pinctrl_i2c2: i2c2grp {
 138                         fsl,pins = <
 139                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 140                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 141                         >;
 142                 };
 143
 144                 pinctrl_spdif: spdifgrp {
 145                         fsl,pins = <
 146                                 MX6QDL_PAD_ENET_RXD0__SPDIF_OUT         0x1b0b0
 147                         >;
 148                 };
 149
 150                 pinctrl_uart1: uart1grp {
 151                         fsl,pins = <
 152                                 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA    0x1b0b1
 153                                 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA    0x1b0b1
 154                         >;
 155                 };
 156
 157                 pinctrl_uart3: uart3grp {
 158                         fsl,pins = <
 159                                 MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
 160                                 MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
 161                                 MX6QDL_PAD_EIM_D23__UART3_CTS_B         0x1b0b1
 162                                 MX6QDL_PAD_EIM_EB3__UART3_RTS_B         0x1b0b1
 163                         >;
 164                 };
 165
 166                 pinctrl_usbotg: usbotggrp {
 167                         fsl,pins = <
 168                                 MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 169                         >;
 170                 };
 171
 172                 pinctrl_usdhc1: usdhc1grp {
 173                         fsl,pins = <
 174                                 MX6QDL_PAD_SD1_CMD__SD1_CMD             0x17059
 175                                 MX6QDL_PAD_SD1_CLK__SD1_CLK             0x10059
 176                                 MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x17059
 177                                 MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x17059
 178                                 MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x17059
 179                                 MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x17059
 180                         >;
 181                 };
 182
 183                 pinctrl_usdhc2: usdhc2grp {
 184                         fsl,pins = <
 185                                 MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 186                                 MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 187                                 MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 188                                 MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 189                                 MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 190                                 MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 191                         >;
 192                 };
 193
 194                 pinctrl_usdhc3: usdhc3grp {
 195                         fsl,pins = <
 196                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 197                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 198                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 199                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 200                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 201                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 202                         >;
 203                 };
 204         };
 205 };
 206
 207 &fec {
 208         pinctrl-names = "default";
 209         pinctrl-0 = <&pinctrl_enet>;
 210         phy-mode = "rgmii";
 211         phy-reset-gpios = <&gpio3 29 0>;
 212         interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 213                               <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 214         fsl,err006687-workaround-present;
 215         status = "okay";
 216 };
 217
 218 &spdif {
 219         pinctrl-names = "default";
 220         pinctrl-0 = <&pinctrl_spdif>;
 221         status = "okay";
 222 };
 223
 224 &ssi1 {
 225         status = "okay";
 226 };
 227
 228 &uart1 {
 229         pinctrl-names = "default";
 230         pinctrl-0 = <&pinctrl_uart1>;
 231         status = "okay";
 232 };
 233
 234 &uart3 {
 235         pinctrl-names = "default";
 236         pinctrl-0 = <&pinctrl_uart3>;
 237         uart-has-rtscts;
 238         status = "okay";
 239 };
 240
 241 &usbh1 {
 242         status = "okay";
 243 };
 244
 245 &usbotg {
 246         pinctrl-names = "default";
 247         pinctrl-0 = <&pinctrl_usbotg>;
 248         disable-over-current;
 249         dr_mode = "peripheral";
 250         status = "okay";
 251 };
 252
 253 &usdhc1 {
 254         pinctrl-names = "default";
 255         pinctrl-0 = <&pinctrl_usdhc1>;
 256         cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 257         status = "okay";
 258 };
 259
 260 &usdhc3 {
 261         pinctrl-names = "default";
 262         pinctrl-0 = <&pinctrl_usdhc3>;
 263         cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
 264         status = "okay";
 265 };