arch/arm/boot/dts/omap3-n900.dts

   1 /*
   2  * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
   3  * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 (or later) as
   7  * published by the Free Software Foundation.
   8  */
   9
  10 /dts-v1/;
  11
  12 #include "omap34xx.dtsi"
  13 #include <dt-bindings/input/input.h>
  14
  15 /*
  16  * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
  17  * for omap AES HW crypto support. When linux kernel try to access memory of AES
  18  * blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
  19  * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
  20  * crash anymore) omap AES support will be disabled for all Nokia N900 devices.
  21  * There is "unofficial" version of bootloader which enables AES in L3 firewall
  22  * but it is not widely used and to prevent kernel crash rather AES is disabled.
  23  * There is also no runtime detection code if AES is disabled in L3 firewall...
  24  */
  25 &aes {
  26         status = "disabled";
  27 };
  28
  29 / {
  30         model = "Nokia N900";
  31         compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
  32
  33         aliases {
  34                 i2c0;
  35                 i2c1 = &i2c1;
  36                 i2c2 = &i2c2;
  37                 i2c3 = &i2c3;
  38         };
  39
  40         cpus {
  41                 cpu@0 {
  42                         cpu0-supply = <&vcc>;
  43                 };
  44         };
  45
  46         leds {
  47                 compatible = "gpio-leds";
  48                 heartbeat {
  49                         label = "debug::sleep";
  50                         gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* gpio162 */
  51                         linux,default-trigger = "default-on";
  52                         pinctrl-names = "default";
  53                         pinctrl-0 = <&debug_leds>;
  54                 };
  55         };
  56
  57         memory@80000000 {
  58                 device_type = "memory";
  59                 reg = <0x80000000 0x10000000>; /* 256 MB */
  60         };
  61
  62         gpio_keys {
  63                 compatible = "gpio-keys";
  64
  65                 camera_lens_cover {
  66                         label = "Camera Lens Cover";
  67                         gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
  68                         linux,input-type = <EV_SW>;
  69                         linux,code = <SW_CAMERA_LENS_COVER>;
  70                         linux,can-disable;
  71                 };
  72
  73                 camera_focus {
  74                         label = "Camera Focus";
  75                         gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
  76                         linux,code = <KEY_CAMERA_FOCUS>;
  77                         linux,can-disable;
  78                 };
  79
  80                 camera_capture {
  81                         label = "Camera Capture";
  82                         gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
  83                         linux,code = <KEY_CAMERA>;
  84                         linux,can-disable;
  85                 };
  86
  87                 lock_button {
  88                         label = "Lock Button";
  89                         gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
  90                         linux,code = <KEY_SCREENLOCK>;
  91                         linux,can-disable;
  92                 };
  93
  94                 keypad_slide {
  95                         label = "Keypad Slide";
  96                         gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
  97                         linux,input-type = <EV_SW>;
  98                         linux,code = <SW_KEYPAD_SLIDE>;
  99                         linux,can-disable;
 100                 };
 101
 102                 proximity_sensor {
 103                         label = "Proximity Sensor";
 104                         gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
 105                         linux,input-type = <EV_SW>;
 106                         linux,code = <SW_FRONT_PROXIMITY>;
 107                         linux,can-disable;
 108                 };
 109         };
 110
 111         isp1707: isp1707 {
 112                 compatible = "nxp,isp1707";
 113                 nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 114                 usb-phy = <&usb2_phy>;
 115         };
 116
 117         tv: connector {
 118                 compatible = "composite-video-connector";
 119                 label = "tv";
 120
 121                 port {
 122                         tv_connector_in: endpoint {
 123                                 remote-endpoint = <&venc_out>;
 124                         };
 125                 };
 126         };
 127
 128         sound: n900-audio {
 129                 compatible = "nokia,n900-audio";
 130
 131                 nokia,cpu-dai = <&mcbsp2>;
 132                 nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
 133                 nokia,headphone-amplifier = <&tpa6130a2>;
 134
 135                 tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
 136                 jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
 137                 eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
 138                 speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
 139         };
 140
 141         battery: n900-battery {
 142                 compatible = "nokia,n900-battery";
 143                 io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
 144                 io-channel-names = "temp", "bsi", "vbat";
 145         };
 146
 147         pwm9: dmtimer-pwm {
 148                 compatible = "ti,omap-dmtimer-pwm";
 149                 #pwm-cells = <3>;
 150                 ti,timers = <&timer9>;
 151                 ti,clock-source = <0x00>; /* timer_sys_ck */
 152         };
 153
 154         ir: n900-ir {
 155                 compatible = "nokia,n900-ir";
 156                 pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
 157         };
 158 };
 159
 160 &omap3_pmx_core {
 161         pinctrl-names = "default";
 162
 163         uart2_pins: pinmux_uart2_pins {
 164                 pinctrl-single,pins = <
 165                         OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)                /* uart2_rx */
 166                         OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)               /* uart2_tx */
 167                 >;
 168         };
 169
 170         uart3_pins: pinmux_uart3_pins {
 171                 pinctrl-single,pins = <
 172                         OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)                /* uart3_rx */
 173                         OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)               /* uart3_tx */
 174                 >;
 175         };
 176
 177         ethernet_pins: pinmux_ethernet_pins {
 178                 pinctrl-single,pins = <
 179                         OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4)       /* gpmc_ncs3.gpio_54 */
 180                         OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4)               /* dss_data16.gpio_86 */
 181                         OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)               /* uart3_rts_sd.gpio_164 */
 182                 >;
 183         };
 184
 185         gpmc_pins: pinmux_gpmc_pins {
 186                 pinctrl-single,pins = <
 187
 188                         /* address lines */
 189                         OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
 190                         OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
 191                         OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
 192
 193                         /* data lines, gpmc_d0..d7 not muxable according to TRM */
 194                         OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
 195                         OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
 196                         OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
 197                         OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
 198                         OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
 199                         OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
 200                         OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
 201                         OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
 202
 203                         /*
 204                          * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
 205                          * according to TRM. OneNAND seems to require PIN_INPUT on clock.
 206                          */
 207                         OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
 208                         OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
 209                 >;
 210         };
 211
 212         i2c1_pins: pinmux_i2c1_pins {
 213                 pinctrl-single,pins = <
 214                         OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)                /* i2c1_scl */
 215                         OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)                /* i2c1_sda */
 216                 >;
 217         };
 218
 219         i2c2_pins: pinmux_i2c2_pins {
 220                 pinctrl-single,pins = <
 221                         OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)                /* i2c2_scl */
 222                         OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)                /* i2c2_sda */
 223                 >;
 224         };
 225
 226         i2c3_pins: pinmux_i2c3_pins {
 227                 pinctrl-single,pins = <
 228                         OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)                /* i2c3_scl */
 229                         OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)                /* i2c3_sda */
 230                 >;
 231         };
 232
 233         debug_leds: pinmux_debug_led_pins {
 234                 pinctrl-single,pins = <
 235                         OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)       /* mcbsp1_clkx.gpio_162 */
 236                 >;
 237         };
 238
 239         mcspi4_pins: pinmux_mcspi4_pins {
 240                 pinctrl-single,pins = <
 241                         OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
 242                         OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
 243                         OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
 244                         OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
 245                 >;
 246         };
 247
 248         mmc1_pins: pinmux_mmc1_pins {
 249                 pinctrl-single,pins = <
 250                         OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
 251                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
 252                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat0 */
 253                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
 254                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
 255                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
 256                 >;
 257         };
 258
 259         mmc2_pins: pinmux_mmc2_pins {
 260                 pinctrl-single,pins = <
 261                         OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
 262                         OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
 263                         OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_dat0 */
 264                         OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
 265                         OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
 266                         OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
 267                         OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
 268                         OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
 269                         OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
 270                         OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
 271                 >;
 272         };
 273
 274         acx565akm_pins: pinmux_acx565akm_pins {
 275                 pinctrl-single,pins = <
 276                         OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4)               /* RX51_LCD_RESET_GPIO */
 277                 >;
 278         };
 279
 280         dss_sdi_pins: pinmux_dss_sdi_pins {
 281                 pinctrl-single,pins = <
 282                         OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
 283                         OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
 284                         OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
 285                         OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
 286
 287                         OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
 288                         OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
 289                 >;
 290         };
 291
 292         wl1251_pins: pinmux_wl1251 {
 293                 pinctrl-single,pins = <
 294                         OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4)               /* gpio 87 => wl1251 enable */
 295                         OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4)                /* gpio 42 => wl1251 irq */
 296                 >;
 297         };
 298
 299         ssi_pins: pinmux_ssi {
 300                 pinctrl-single,pins = <
 301                         OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
 302                         OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)               /* ssi1_flag_tx */
 303                         OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)                /* ssi1_wake_tx (cawake) */
 304                         OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)               /* ssi1_dat_tx */
 305                         OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)                /* ssi1_dat_rx */
 306                         OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)                /* ssi1_flag_rx */
 307                         OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1)               /* ssi1_rdy_rx */
 308                         OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1)               /* ssi1_wake */
 309                 >;
 310         };
 311
 312         modem_pins: pinmux_modem {
 313                 pinctrl-single,pins = <
 314                         OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4)               /* gpio 70 => cmt_apeslpx */
 315                         OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)                /* gpio 72 => ape_rst_rq */
 316                         OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)               /* gpio 73 => cmt_rst_rq */
 317                         OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4)               /* gpio 74 => cmt_en */
 318                         OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4)               /* gpio 75 => cmt_rst */
 319                         OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)               /* gpio 157 => cmt_bsi */
 320                 >;
 321         };
 322 };
 323
 324 &i2c1 {
 325         pinctrl-names = "default";
 326         pinctrl-0 = <&i2c1_pins>;
 327
 328         clock-frequency = <2200000>;
 329
 330         twl: twl@48 {
 331                 reg = <0x48>;
 332                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 333                 interrupt-parent = <&intc>;
 334         };
 335 };
 336
 337 #include "twl4030.dtsi"
 338 #include "twl4030_omap3.dtsi"
 339
 340 &vaux1 {
 341         regulator-name = "V28";
 342         regulator-min-microvolt = <2800000>;
 343         regulator-max-microvolt = <2800000>;
 344         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 345         regulator-always-on; /* due to battery cover sensor */
 346 };
 347
 348 &vaux2 {
 349         regulator-name = "VCSI";
 350         regulator-min-microvolt = <1800000>;
 351         regulator-max-microvolt = <1800000>;
 352         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 353 };
 354
 355 &vaux3 {
 356         regulator-name = "VMMC2_30";
 357         regulator-min-microvolt = <2800000>;
 358         regulator-max-microvolt = <3000000>;
 359         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 360 };
 361
 362 &vaux4 {
 363         regulator-name = "VCAM_ANA_28";
 364         regulator-min-microvolt = <2800000>;
 365         regulator-max-microvolt = <2800000>;
 366         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 367 };
 368
 369 &vmmc1 {
 370         regulator-name = "VMMC1";
 371         regulator-min-microvolt = <1850000>;
 372         regulator-max-microvolt = <3150000>;
 373         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 374 };
 375
 376 &vmmc2 {
 377         regulator-name = "V28_A";
 378         regulator-min-microvolt = <2800000>;
 379         regulator-max-microvolt = <3000000>;
 380         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 381         regulator-always-on; /* due VIO leak to AIC34 VDDs */
 382 };
 383
 384 &vpll1 {
 385         regulator-name = "VPLL";
 386         regulator-min-microvolt = <1800000>;
 387         regulator-max-microvolt = <1800000>;
 388         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 389         regulator-always-on;
 390 };
 391
 392 &vpll2 {
 393         regulator-name = "VSDI_CSI";
 394         regulator-min-microvolt = <1800000>;
 395         regulator-max-microvolt = <1800000>;
 396         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 397         regulator-always-on;
 398 };
 399
 400 &vsim {
 401         regulator-name = "VMMC2_IO_18";
 402         regulator-min-microvolt = <1800000>;
 403         regulator-max-microvolt = <1800000>;
 404         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 405 };
 406
 407 &vio {
 408         regulator-name = "VIO";
 409         regulator-min-microvolt = <1800000>;
 410         regulator-max-microvolt = <1800000>;
 411 };
 412
 413 &vintana1 {
 414         regulator-name = "VINTANA1";
 415         /* fixed to 1500000 */
 416         regulator-always-on;
 417 };
 418
 419 &vintana2 {
 420         regulator-name = "VINTANA2";
 421         regulator-min-microvolt = <2750000>;
 422         regulator-max-microvolt = <2750000>;
 423         regulator-always-on;
 424 };
 425
 426 &vintdig {
 427         regulator-name = "VINTDIG";
 428         /* fixed to 1500000 */
 429         regulator-always-on;
 430 };
 431
 432 &twl {
 433         twl_audio: audio {
 434                 compatible = "ti,twl4030-audio";
 435                 ti,enable-vibra = <1>;
 436         };
 437
 438         twl_power: power {
 439                 compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
 440                 ti,use_poweroff;
 441         };
 442 };
 443
 444 &twl_keypad {
 445         linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
 446                          MATRIX_KEY(0x00, 0x01, KEY_O)
 447                          MATRIX_KEY(0x00, 0x02, KEY_P)
 448                          MATRIX_KEY(0x00, 0x03, KEY_COMMA)
 449                          MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
 450                          MATRIX_KEY(0x00, 0x06, KEY_A)
 451                          MATRIX_KEY(0x00, 0x07, KEY_S)
 452
 453                          MATRIX_KEY(0x01, 0x00, KEY_W)
 454                          MATRIX_KEY(0x01, 0x01, KEY_D)
 455                          MATRIX_KEY(0x01, 0x02, KEY_F)
 456                          MATRIX_KEY(0x01, 0x03, KEY_G)
 457                          MATRIX_KEY(0x01, 0x04, KEY_H)
 458                          MATRIX_KEY(0x01, 0x05, KEY_J)
 459                          MATRIX_KEY(0x01, 0x06, KEY_K)
 460                          MATRIX_KEY(0x01, 0x07, KEY_L)
 461
 462                          MATRIX_KEY(0x02, 0x00, KEY_E)
 463                          MATRIX_KEY(0x02, 0x01, KEY_DOT)
 464                          MATRIX_KEY(0x02, 0x02, KEY_UP)
 465                          MATRIX_KEY(0x02, 0x03, KEY_ENTER)
 466                          MATRIX_KEY(0x02, 0x05, KEY_Z)
 467                          MATRIX_KEY(0x02, 0x06, KEY_X)
 468                          MATRIX_KEY(0x02, 0x07, KEY_C)
 469                          MATRIX_KEY(0x02, 0x08, KEY_F9)
 470
 471                          MATRIX_KEY(0x03, 0x00, KEY_R)
 472                          MATRIX_KEY(0x03, 0x01, KEY_V)
 473                          MATRIX_KEY(0x03, 0x02, KEY_B)
 474                          MATRIX_KEY(0x03, 0x03, KEY_N)
 475                          MATRIX_KEY(0x03, 0x04, KEY_M)
 476                          MATRIX_KEY(0x03, 0x05, KEY_SPACE)
 477                          MATRIX_KEY(0x03, 0x06, KEY_SPACE)
 478                          MATRIX_KEY(0x03, 0x07, KEY_LEFT)
 479
 480                          MATRIX_KEY(0x04, 0x00, KEY_T)
 481                          MATRIX_KEY(0x04, 0x01, KEY_DOWN)
 482                          MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
 483                          MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
 484                          MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
 485                          MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
 486                          MATRIX_KEY(0x04, 0x08, KEY_F10)
 487
 488                          MATRIX_KEY(0x05, 0x00, KEY_Y)
 489                          MATRIX_KEY(0x05, 0x08, KEY_F11)
 490
 491                          MATRIX_KEY(0x06, 0x00, KEY_U)
 492
 493                          MATRIX_KEY(0x07, 0x00, KEY_I)
 494                          MATRIX_KEY(0x07, 0x01, KEY_F7)
 495                          MATRIX_KEY(0x07, 0x02, KEY_F8)
 496                          >;
 497 };
 498
 499 &twl_gpio {
 500         ti,pullups      = <0x0>;
 501         ti,pulldowns    = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
 502 };
 503
 504 &i2c2 {
 505         pinctrl-names = "default";
 506         pinctrl-0 = <&i2c2_pins>;
 507
 508         clock-frequency = <100000>;
 509
 510         tlv320aic3x: tlv320aic3x@18 {
 511                 compatible = "ti,tlv320aic3x";
 512                 reg = <0x18>;
 513                 gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
 514                 ai3x-gpio-func = <
 515                         0 /* AIC3X_GPIO1_FUNC_DISABLED */
 516                         5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
 517                 >;
 518
 519                 AVDD-supply = <&vmmc2>;
 520                 DRVDD-supply = <&vmmc2>;
 521                 IOVDD-supply = <&vio>;
 522                 DVDD-supply = <&vio>;
 523
 524                 ai3x-micbias-vg = <1>;
 525         };
 526
 527         tlv320aic3x_aux: tlv320aic3x@19 {
 528                 compatible = "ti,tlv320aic3x";
 529                 reg = <0x19>;
 530                 gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
 531
 532                 AVDD-supply = <&vmmc2>;
 533                 DRVDD-supply = <&vmmc2>;
 534                 IOVDD-supply = <&vio>;
 535                 DVDD-supply = <&vio>;
 536
 537                 ai3x-micbias-vg = <2>;
 538         };
 539
 540         tsl2563: tsl2563@29 {
 541                 compatible = "amstaos,tsl2563";
 542                 reg = <0x29>;
 543
 544                 amstaos,cover-comp-gain = <16>;
 545         };
 546
 547         adp1653: led-controller@30 {
 548                 compatible = "adi,adp1653";
 549                 reg = <0x30>;
 550                 enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
 551
 552                 flash {
 553                         flash-timeout-us = <500000>;
 554                         flash-max-microamp = <320000>;
 555                         led-max-microamp = <50000>;
 556                 };
 557                 indicator {
 558                         led-max-microamp = <17500>;
 559                 };
 560         };
 561
 562         lp5523: lp5523@32 {
 563                 compatible = "national,lp5523";
 564                 reg = <0x32>;
 565                 clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 566                 enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 567
 568                 chan0 {
 569                         chan-name = "lp5523:kb1";
 570                         led-cur = /bits/ 8 <50>;
 571                         max-cur = /bits/ 8 <100>;
 572                 };
 573
 574                 chan1 {
 575                         chan-name = "lp5523:kb2";
 576                         led-cur = /bits/ 8 <50>;
 577                         max-cur = /bits/ 8 <100>;
 578                 };
 579
 580                 chan2 {
 581                         chan-name = "lp5523:kb3";
 582                         led-cur = /bits/ 8 <50>;
 583                         max-cur = /bits/ 8 <100>;
 584                 };
 585
 586                 chan3 {
 587                         chan-name = "lp5523:kb4";
 588                         led-cur = /bits/ 8 <50>;
 589                         max-cur = /bits/ 8 <100>;
 590                 };
 591
 592                 chan4 {
 593                         chan-name = "lp5523:b";
 594                         led-cur = /bits/ 8 <50>;
 595                         max-cur = /bits/ 8 <100>;
 596                 };
 597
 598                 chan5 {
 599                         chan-name = "lp5523:g";
 600                         led-cur = /bits/ 8 <50>;
 601                         max-cur = /bits/ 8 <100>;
 602                 };
 603
 604                 chan6 {
 605                         chan-name = "lp5523:r";
 606                         led-cur = /bits/ 8 <50>;
 607                         max-cur = /bits/ 8 <100>;
 608                 };
 609
 610                 chan7 {
 611                         chan-name = "lp5523:kb5";
 612                         led-cur = /bits/ 8 <50>;
 613                         max-cur = /bits/ 8 <100>;
 614                 };
 615
 616                 chan8 {
 617                         chan-name = "lp5523:kb6";
 618                         led-cur = /bits/ 8 <50>;
 619                         max-cur = /bits/ 8 <100>;
 620                 };
 621         };
 622
 623         bq27200: bq27200@55 {
 624                 compatible = "ti,bq27200";
 625                 reg = <0x55>;
 626         };
 627
 628         tpa6130a2: tpa6130a2@60 {
 629                 compatible = "ti,tpa6130a2";
 630                 reg = <0x60>;
 631
 632                 Vdd-supply = <&vmmc2>;
 633
 634                 power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
 635         };
 636
 637         si4713: si4713@63 {
 638                 compatible = "silabs,si4713";
 639                 reg = <0x63>;
 640
 641                 interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
 642                 reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
 643                 vio-supply = <&vio>;
 644                 vdd-supply = <&vaux1>;
 645         };
 646
 647         bq24150a: bq24150a@6b {
 648                 compatible = "ti,bq24150a";
 649                 reg = <0x6b>;
 650
 651                 ti,current-limit = <100>;
 652                 ti,weak-battery-voltage = <3400>;
 653                 ti,battery-regulation-voltage = <4200>;
 654                 ti,charge-current = <650>;
 655                 ti,termination-current = <100>;
 656                 ti,resistor-sense = <68>;
 657
 658                 ti,usb-charger-detection = <&isp1707>;
 659         };
 660 };
 661
 662 &i2c3 {
 663         pinctrl-names = "default";
 664         pinctrl-0 = <&i2c3_pins>;
 665
 666         clock-frequency = <400000>;
 667
 668         lis302dl: lis3lv02d@1d {
 669                 compatible = "st,lis3lv02d";
 670                 reg = <0x1d>;
 671
 672                 Vdd-supply = <&vaux1>;
 673                 Vdd_IO-supply = <&vio>;
 674
 675                 interrupt-parent = <&gpio6>;
 676                 interrupts = <21 20>; /* 181 and 180 */
 677
 678                 /* click flags */
 679                 st,click-single-x;
 680                 st,click-single-y;
 681                 st,click-single-z;
 682
 683                 /* Limits are 0.5g * value */
 684                 st,click-threshold-x = <8>;
 685                 st,click-threshold-y = <8>;
 686                 st,click-threshold-z = <10>;
 687
 688                 /* Click must be longer than time limit */
 689                 st,click-time-limit = <9>;
 690
 691                 /* Kind of debounce filter */
 692                 st,click-latency = <50>;
 693
 694                 /* Interrupt line 2 for click detection */
 695                 st,irq2-click;
 696
 697                 st,wakeup-x-hi;
 698                 st,wakeup-y-hi;
 699                 st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
 700
 701                 st,wakeup2-z-hi;
 702                 st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
 703
 704                 st,hipass1-disable;
 705                 st,hipass2-disable;
 706
 707                 st,axis-x = <1>;    /* LIS3_DEV_X */
 708                 st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
 709                 st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
 710
 711                 st,min-limit-x = <(-32)>;
 712                 st,min-limit-y = <3>;
 713                 st,min-limit-z = <3>;
 714
 715                 st,max-limit-x = <(-3)>;
 716                 st,max-limit-y = <32>;
 717                 st,max-limit-z = <32>;
 718         };
 719 };
 720
 721 &mmc1 {
 722         pinctrl-names = "default";
 723         pinctrl-0 = <&mmc1_pins>;
 724         vmmc-supply = <&vmmc1>;
 725         bus-width = <4>;
 726         cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
 727 };
 728
 729 /* most boards use vaux3, only some old versions use vmmc2 instead */
 730 &mmc2 {
 731         pinctrl-names = "default";
 732         pinctrl-0 = <&mmc2_pins>;
 733         vmmc-supply = <&vaux3>;
 734         vmmc_aux-supply = <&vsim>;
 735         bus-width = <8>;
 736         non-removable;
 737 };
 738
 739 &mmc3 {
 740         status = "disabled";
 741 };
 742
 743 &gpmc {
 744         ranges = <0 0 0x01000000 0x01000000>,   /* 16 MB for OneNAND */
 745                  <1 0 0x02000000 0x01000000>;   /* 16 MB for smc91c96 */
 746         pinctrl-names = "default";
 747         pinctrl-0 = <&gpmc_pins>;
 748
 749         /* sys_ndmareq1 could be used by the driver, not as gpio65 though */
 750         onenand@0,0 {
 751                 #address-cells = <1>;
 752                 #size-cells = <1>;
 753                 reg = <0 0 0x20000>;    /* CS0, offset 0, IO size 128K */
 754
 755                 gpmc,sync-read;
 756                 gpmc,sync-write;
 757                 gpmc,burst-length = <16>;
 758                 gpmc,burst-read;
 759                 gpmc,burst-wrap;
 760                 gpmc,burst-write;
 761                 gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
 762                 gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
 763                 gpmc,cs-on-ns = <0>;
 764                 gpmc,cs-rd-off-ns = <87>;
 765                 gpmc,cs-wr-off-ns = <87>;
 766                 gpmc,adv-on-ns = <0>;
 767                 gpmc,adv-rd-off-ns = <10>;
 768                 gpmc,adv-wr-off-ns = <10>;
 769                 gpmc,oe-on-ns = <15>;
 770                 gpmc,oe-off-ns = <87>;
 771                 gpmc,we-on-ns = <0>;
 772                 gpmc,we-off-ns = <87>;
 773                 gpmc,rd-cycle-ns = <112>;
 774                 gpmc,wr-cycle-ns = <112>;
 775                 gpmc,access-ns = <81>;
 776                 gpmc,page-burst-access-ns = <15>;
 777                 gpmc,bus-turnaround-ns = <0>;
 778                 gpmc,cycle2cycle-delay-ns = <0>;
 779                 gpmc,wait-monitoring-ns = <0>;
 780                 gpmc,clk-activation-ns = <5>;
 781                 gpmc,wr-data-mux-bus-ns = <30>;
 782                 gpmc,wr-access-ns = <81>;
 783                 gpmc,sync-clk-ps = <15000>;
 784
 785                 /*
 786                  * MTD partition table corresponding to Nokia's
 787                  * Maemo 5 (Fremantle) release.
 788                  */
 789                 partition@0 {
 790                         label = "bootloader";
 791                         reg = <0x00000000 0x00020000>;
 792                         read-only;
 793                 };
 794                 partition@1 {
 795                         label = "config";
 796                         reg = <0x00020000 0x00060000>;
 797                 };
 798                 partition@2 {
 799                         label = "log";
 800                         reg = <0x00080000 0x00040000>;
 801                 };
 802                 partition@3 {
 803                         label = "kernel";
 804                         reg = <0x000c0000 0x00200000>;
 805                 };
 806                 partition@4 {
 807                         label = "initfs";
 808                         reg = <0x002c0000 0x00200000>;
 809                 };
 810                 partition@5 {
 811                         label = "rootfs";
 812                         reg = <0x004c0000 0x0fb40000>;
 813                 };
 814         };
 815
 816         /* Ethernet is on some early development boards and qemu */
 817         ethernet@gpmc {
 818                 compatible = "smsc,lan91c94";
 819                 interrupt-parent = <&gpio2>;
 820                 interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;  /* gpio54 */
 821                 reg = <1 0 0xf>;                /* 16 byte IO range */
 822                 bank-width = <2>;
 823                 pinctrl-names = "default";
 824                 pinctrl-0 = <&ethernet_pins>;
 825                 power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;     /* gpio86 */
 826                 reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;      /* gpio164 */
 827                 gpmc,device-width = <2>;
 828                 gpmc,sync-clk-ps = <0>;
 829                 gpmc,cs-on-ns = <0>;
 830                 gpmc,cs-rd-off-ns = <48>;
 831                 gpmc,cs-wr-off-ns = <24>;
 832                 gpmc,adv-on-ns = <0>;
 833                 gpmc,adv-rd-off-ns = <0>;
 834                 gpmc,adv-wr-off-ns = <0>;
 835                 gpmc,we-on-ns = <12>;
 836                 gpmc,we-off-ns = <18>;
 837                 gpmc,oe-on-ns = <12>;
 838                 gpmc,oe-off-ns = <48>;
 839                 gpmc,page-burst-access-ns = <0>;
 840                 gpmc,access-ns = <42>;
 841                 gpmc,rd-cycle-ns = <180>;
 842                 gpmc,wr-cycle-ns = <180>;
 843                 gpmc,bus-turnaround-ns = <0>;
 844                 gpmc,cycle2cycle-delay-ns = <0>;
 845                 gpmc,wait-monitoring-ns = <0>;
 846                 gpmc,clk-activation-ns = <0>;
 847                 gpmc,wr-access-ns = <0>;
 848                 gpmc,wr-data-mux-bus-ns = <12>;
 849         };
 850 };
 851
 852 &mcspi1 {
 853         /*
 854          * For some reason, touchscreen is necessary for screen to work at
 855          * all on real hw. It works well without it on emulator.
 856          *
 857          * Also... order in the device tree actually matters here.
 858          */
 859         tsc2005@0 {
 860                 compatible = "ti,tsc2005";
 861                 spi-max-frequency = <6000000>;
 862                 reg = <0>;
 863
 864                 vio-supply = <&vio>;
 865
 866                 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
 867                 interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
 868
 869                 touchscreen-fuzz-x = <4>;
 870                 touchscreen-fuzz-y = <7>;
 871                 touchscreen-fuzz-pressure = <2>;
 872                 touchscreen-size-x = <4096>;
 873                 touchscreen-size-y = <4096>;
 874                 touchscreen-max-pressure = <2048>;
 875
 876                 ti,x-plate-ohms = <280>;
 877                 ti,esd-recovery-timeout-ms = <8000>;
 878         };
 879
 880         acx565akm@2 {
 881                 compatible = "sony,acx565akm";
 882                 spi-max-frequency = <6000000>;
 883                 reg = <2>;
 884
 885                 pinctrl-names = "default";
 886                 pinctrl-0 = <&acx565akm_pins>;
 887
 888                 label = "lcd";
 889                 reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
 890
 891                 port {
 892                         lcd_in: endpoint {
 893                                 remote-endpoint = <&sdi_out>;
 894                         };
 895                 };
 896         };
 897 };
 898
 899 &mcspi4 {
 900         pinctrl-names = "default";
 901         pinctrl-0 = <&mcspi4_pins>;
 902
 903         wl1251@0 {
 904                 pinctrl-names = "default";
 905                 pinctrl-0 = <&wl1251_pins>;
 906
 907                 vio-supply = <&vio>;
 908
 909                 compatible = "ti,wl1251";
 910                 reg = <0>;
 911                 spi-max-frequency = <48000000>;
 912
 913                 spi-cpol;
 914                 spi-cpha;
 915
 916                 ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
 917
 918                 interrupt-parent = <&gpio2>;
 919                 interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
 920         };
 921 };
 922
 923 &usb_otg_hs {
 924         interface-type = <0>;
 925         usb-phy = <&usb2_phy>;
 926         phys = <&usb2_phy>;
 927         phy-names = "usb2-phy";
 928         mode = <2>;
 929         power = <50>;
 930 };
 931
 932 &uart1 {
 933         status = "disabled";
 934 };
 935
 936 &uart2 {
 937         interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 938         pinctrl-names = "default";
 939         pinctrl-0 = <&uart2_pins>;
 940 };
 941
 942 &uart3 {
 943         interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 944         pinctrl-names = "default";
 945         pinctrl-0 = <&uart3_pins>;
 946 };
 947
 948 &dss {
 949         status = "ok";
 950
 951         pinctrl-names = "default";
 952         pinctrl-0 = <&dss_sdi_pins>;
 953
 954         vdds_sdi-supply = <&vaux1>;
 955
 956         ports {
 957                 #address-cells = <1>;
 958                 #size-cells = <0>;
 959
 960                 port@1 {
 961                         reg = <1>;
 962
 963                         sdi_out: endpoint {
 964                                 remote-endpoint = <&lcd_in>;
 965                                 datapairs = <2>;
 966                         };
 967                 };
 968         };
 969 };
 970
 971 &venc {
 972         status = "ok";
 973
 974         vdda-supply = <&vdac>;
 975
 976         port {
 977                 venc_out: endpoint {
 978                         remote-endpoint = <&tv_connector_in>;
 979                         ti,channels = <1>;
 980                 };
 981         };
 982 };
 983
 984 &mcbsp2 {
 985         status = "ok";
 986 };
 987
 988 &ssi_port1 {
 989         pinctrl-names = "default";
 990         pinctrl-0 = <&ssi_pins>;
 991
 992         ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
 993
 994         modem: hsi-client {
 995                 compatible = "nokia,n900-modem";
 996
 997                 pinctrl-names = "default";
 998                 pinctrl-0 = <&modem_pins>;
 999
1000                 hsi-channel-ids = <0>, <1>, <2>, <3>;
1001                 hsi-channel-names = "mcsaab-control",
1002                                     "speech-control",
1003                                     "speech-data",
1004                                     "mcsaab-data";
1005                 hsi-speed-kbps = <55000>;
1006                 hsi-mode = "frame";
1007                 hsi-flow = "synchronized";
1008                 hsi-arb-mode = "round-robin";
1009
1010                 interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
1011
1012                 gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
1013                         <&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
1014                         <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
1015                         <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
1016                         <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
1017                 gpio-names = "cmt_apeslpx",
1018                              "cmt_rst_rq",
1019                              "cmt_en",
1020                              "cmt_rst",
1021                              "cmt_bsi";
1022         };
1023 };
1024
1025 &ssi_port2 {
1026         status = "disabled";
1027 };