2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 * Based on "omap4.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include <dt-bindings/pinctrl/omap.h>
18 compatible = "ti,omap5";
19 interrupt-parent = <&wakeupgen>;
41 compatible = "arm,cortex-a15";
50 clocks = <&dpll_mpu_ck>;
53 clock-latency = <300000>; /* From omap-cpufreq driver */
56 cooling-min-level = <0>;
57 cooling-max-level = <2>;
58 #cooling-cells = <2>; /* min followed by max */
62 compatible = "arm,cortex-a15";
68 #include "omap4-cpu-thermal.dtsi"
69 #include "omap5-gpu-thermal.dtsi"
70 #include "omap5-core-thermal.dtsi"
74 compatible = "arm,armv7-timer";
75 /* PPI secure/nonsecure IRQ */
76 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
77 <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
78 <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
79 <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
80 interrupt-parent = <&gic>;
84 compatible = "arm,cortex-a15-pmu";
85 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
86 <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
89 gic: interrupt-controller@48211000 {
90 compatible = "arm,cortex-a15-gic";
92 #interrupt-cells = <3>;
93 reg = <0x48211000 0x1000>,
97 interrupt-parent = <&gic>;
100 wakeupgen: interrupt-controller@48281000 {
101 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
102 interrupt-controller;
103 #interrupt-cells = <3>;
104 reg = <0x48281000 0x1000>;
105 interrupt-parent = <&gic>;
109 * The soc node represents the soc top level view. It is used for IPs
110 * that are not memory mapped in the MPU view or for the MPU itself.
113 compatible = "ti,omap-infra";
115 compatible = "ti,omap4-mpu";
122 * XXX: Use a flat representation of the OMAP3 interconnect.
123 * The real OMAP interconnect network is quite complex.
124 * Since it will not bring real advantage to represent that in DT for
125 * the moment, just use a fake OCP bus entry to represent the whole bus
129 compatible = "ti,omap5-l3-noc", "simple-bus";
130 #address-cells = <1>;
133 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
134 reg = <0x44000000 0x2000>,
137 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
138 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
140 l4_cfg: l4@4a000000 {
141 compatible = "ti,omap5-l4-cfg", "simple-bus";
142 #address-cells = <1>;
144 ranges = <0 0x4a000000 0x22a000>;
147 compatible = "ti,omap5-scm-core", "simple-bus";
148 reg = <0x2000 0x1000>;
149 #address-cells = <1>;
151 ranges = <0 0x2000 0x800>;
153 scm_conf: scm_conf@0 {
154 compatible = "syscon";
156 #address-cells = <1>;
161 scm_padconf_core: scm@2800 {
162 compatible = "ti,omap5-scm-padconf-core",
164 #address-cells = <1>;
166 ranges = <0 0x2800 0x800>;
168 omap5_pmx_core: pinmux@40 {
169 compatible = "ti,omap5-padconf",
172 #address-cells = <1>;
174 #interrupt-cells = <1>;
175 interrupt-controller;
176 pinctrl-single,register-width = <16>;
177 pinctrl-single,function-mask = <0x7fff>;
180 omap5_padconf_global: omap5_padconf_global@5a0 {
181 compatible = "syscon",
184 #address-cells = <1>;
186 ranges = <0 0x5a0 0xec>;
188 pbias_regulator: pbias_regulator@60 {
189 compatible = "ti,pbias-omap5", "ti,pbias-omap";
191 syscon = <&omap5_padconf_global>;
192 pbias_mmc_reg: pbias_mmc_omap5 {
193 regulator-name = "pbias_mmc_omap5";
194 regulator-min-microvolt = <1800000>;
195 regulator-max-microvolt = <3000000>;
201 cm_core_aon: cm_core_aon@4000 {
202 compatible = "ti,omap5-cm-core-aon";
203 reg = <0x4000 0x2000>;
205 cm_core_aon_clocks: clocks {
206 #address-cells = <1>;
210 cm_core_aon_clockdomains: clockdomains {
214 cm_core: cm_core@8000 {
215 compatible = "ti,omap5-cm-core";
216 reg = <0x8000 0x3000>;
218 cm_core_clocks: clocks {
219 #address-cells = <1>;
223 cm_core_clockdomains: clockdomains {
228 l4_wkup: l4@4ae00000 {
229 compatible = "ti,omap5-l4-wkup", "simple-bus";
230 #address-cells = <1>;
232 ranges = <0 0x4ae00000 0x2b000>;
234 counter32k: counter@4000 {
235 compatible = "ti,omap-counter32k";
237 ti,hwmods = "counter_32k";
241 compatible = "ti,omap5-prm";
242 reg = <0x6000 0x3000>;
243 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
246 #address-cells = <1>;
250 prm_clockdomains: clockdomains {
255 compatible = "ti,omap5-scrm";
256 reg = <0xa000 0x2000>;
258 scrm_clocks: clocks {
259 #address-cells = <1>;
263 scrm_clockdomains: clockdomains {
267 omap5_pmx_wkup: pinmux@c840 {
268 compatible = "ti,omap5-padconf",
270 reg = <0xc840 0x003c>;
271 #address-cells = <1>;
273 #interrupt-cells = <1>;
274 interrupt-controller;
275 pinctrl-single,register-width = <16>;
276 pinctrl-single,function-mask = <0x7fff>;
280 ocmcram: ocmcram@40300000 {
281 compatible = "mmio-sram";
282 reg = <0x40300000 0x20000>; /* 128k */
285 sdma: dma-controller@4a056000 {
286 compatible = "ti,omap4430-sdma";
287 reg = <0x4a056000 0x1000>;
288 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
289 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
290 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
291 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
294 dma-requests = <127>;
297 gpio1: gpio@4ae10000 {
298 compatible = "ti,omap4-gpio";
299 reg = <0x4ae10000 0x200>;
300 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
305 interrupt-controller;
306 #interrupt-cells = <2>;
309 gpio2: gpio@48055000 {
310 compatible = "ti,omap4-gpio";
311 reg = <0x48055000 0x200>;
312 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
316 interrupt-controller;
317 #interrupt-cells = <2>;
320 gpio3: gpio@48057000 {
321 compatible = "ti,omap4-gpio";
322 reg = <0x48057000 0x200>;
323 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
327 interrupt-controller;
328 #interrupt-cells = <2>;
331 gpio4: gpio@48059000 {
332 compatible = "ti,omap4-gpio";
333 reg = <0x48059000 0x200>;
334 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
338 interrupt-controller;
339 #interrupt-cells = <2>;
342 gpio5: gpio@4805b000 {
343 compatible = "ti,omap4-gpio";
344 reg = <0x4805b000 0x200>;
345 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
349 interrupt-controller;
350 #interrupt-cells = <2>;
353 gpio6: gpio@4805d000 {
354 compatible = "ti,omap4-gpio";
355 reg = <0x4805d000 0x200>;
356 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
360 interrupt-controller;
361 #interrupt-cells = <2>;
364 gpio7: gpio@48051000 {
365 compatible = "ti,omap4-gpio";
366 reg = <0x48051000 0x200>;
367 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
371 interrupt-controller;
372 #interrupt-cells = <2>;
375 gpio8: gpio@48053000 {
376 compatible = "ti,omap4-gpio";
377 reg = <0x48053000 0x200>;
378 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
382 interrupt-controller;
383 #interrupt-cells = <2>;
386 gpmc: gpmc@50000000 {
387 compatible = "ti,omap4430-gpmc";
388 reg = <0x50000000 0x1000>;
389 #address-cells = <2>;
391 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
395 gpmc,num-waitpins = <4>;
397 clocks = <&l3_iclk_div>;
399 interrupt-controller;
400 #interrupt-cells = <2>;
406 compatible = "ti,omap4-i2c";
407 reg = <0x48070000 0x100>;
408 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
409 #address-cells = <1>;
415 compatible = "ti,omap4-i2c";
416 reg = <0x48072000 0x100>;
417 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
418 #address-cells = <1>;
424 compatible = "ti,omap4-i2c";
425 reg = <0x48060000 0x100>;
426 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
427 #address-cells = <1>;
433 compatible = "ti,omap4-i2c";
434 reg = <0x4807a000 0x100>;
435 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
436 #address-cells = <1>;
442 compatible = "ti,omap4-i2c";
443 reg = <0x4807c000 0x100>;
444 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
445 #address-cells = <1>;
450 hwspinlock: spinlock@4a0f6000 {
451 compatible = "ti,omap4-hwspinlock";
452 reg = <0x4a0f6000 0x1000>;
453 ti,hwmods = "spinlock";
457 mcspi1: spi@48098000 {
458 compatible = "ti,omap4-mcspi";
459 reg = <0x48098000 0x200>;
460 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
461 #address-cells = <1>;
463 ti,hwmods = "mcspi1";
473 dma-names = "tx0", "rx0", "tx1", "rx1",
474 "tx2", "rx2", "tx3", "rx3";
477 mcspi2: spi@4809a000 {
478 compatible = "ti,omap4-mcspi";
479 reg = <0x4809a000 0x200>;
480 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
481 #address-cells = <1>;
483 ti,hwmods = "mcspi2";
489 dma-names = "tx0", "rx0", "tx1", "rx1";
492 mcspi3: spi@480b8000 {
493 compatible = "ti,omap4-mcspi";
494 reg = <0x480b8000 0x200>;
495 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
496 #address-cells = <1>;
498 ti,hwmods = "mcspi3";
500 dmas = <&sdma 15>, <&sdma 16>;
501 dma-names = "tx0", "rx0";
504 mcspi4: spi@480ba000 {
505 compatible = "ti,omap4-mcspi";
506 reg = <0x480ba000 0x200>;
507 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
508 #address-cells = <1>;
510 ti,hwmods = "mcspi4";
512 dmas = <&sdma 70>, <&sdma 71>;
513 dma-names = "tx0", "rx0";
516 uart1: serial@4806a000 {
517 compatible = "ti,omap4-uart";
518 reg = <0x4806a000 0x100>;
519 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
521 clock-frequency = <48000000>;
524 uart2: serial@4806c000 {
525 compatible = "ti,omap4-uart";
526 reg = <0x4806c000 0x100>;
527 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
529 clock-frequency = <48000000>;
532 uart3: serial@48020000 {
533 compatible = "ti,omap4-uart";
534 reg = <0x48020000 0x100>;
535 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
537 clock-frequency = <48000000>;
540 uart4: serial@4806e000 {
541 compatible = "ti,omap4-uart";
542 reg = <0x4806e000 0x100>;
543 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
545 clock-frequency = <48000000>;
548 uart5: serial@48066000 {
549 compatible = "ti,omap4-uart";
550 reg = <0x48066000 0x100>;
551 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
553 clock-frequency = <48000000>;
556 uart6: serial@48068000 {
557 compatible = "ti,omap4-uart";
558 reg = <0x48068000 0x100>;
559 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
561 clock-frequency = <48000000>;
565 compatible = "ti,omap4-hsmmc";
566 reg = <0x4809c000 0x400>;
567 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
570 ti,needs-special-reset;
571 dmas = <&sdma 61>, <&sdma 62>;
572 dma-names = "tx", "rx";
573 pbias-supply = <&pbias_mmc_reg>;
577 compatible = "ti,omap4-hsmmc";
578 reg = <0x480b4000 0x400>;
579 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
581 ti,needs-special-reset;
582 dmas = <&sdma 47>, <&sdma 48>;
583 dma-names = "tx", "rx";
587 compatible = "ti,omap4-hsmmc";
588 reg = <0x480ad000 0x400>;
589 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
591 ti,needs-special-reset;
592 dmas = <&sdma 77>, <&sdma 78>;
593 dma-names = "tx", "rx";
597 compatible = "ti,omap4-hsmmc";
598 reg = <0x480d1000 0x400>;
599 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
601 ti,needs-special-reset;
602 dmas = <&sdma 57>, <&sdma 58>;
603 dma-names = "tx", "rx";
607 compatible = "ti,omap4-hsmmc";
608 reg = <0x480d5000 0x400>;
609 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
611 ti,needs-special-reset;
612 dmas = <&sdma 59>, <&sdma 60>;
613 dma-names = "tx", "rx";
616 mmu_dsp: mmu@4a066000 {
617 compatible = "ti,omap4-iommu";
618 reg = <0x4a066000 0x100>;
619 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
620 ti,hwmods = "mmu_dsp";
624 mmu_ipu: mmu@55082000 {
625 compatible = "ti,omap4-iommu";
626 reg = <0x55082000 0x100>;
627 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
628 ti,hwmods = "mmu_ipu";
630 ti,iommu-bus-err-back;
633 keypad: keypad@4ae1c000 {
634 compatible = "ti,omap4-keypad";
635 reg = <0x4ae1c000 0x400>;
639 mcpdm: mcpdm@40132000 {
640 compatible = "ti,omap4-mcpdm";
641 reg = <0x40132000 0x7f>, /* MPU private access */
642 <0x49032000 0x7f>; /* L3 Interconnect */
643 reg-names = "mpu", "dma";
644 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
648 dma-names = "up_link", "dn_link";
652 dmic: dmic@4012e000 {
653 compatible = "ti,omap4-dmic";
654 reg = <0x4012e000 0x7f>, /* MPU private access */
655 <0x4902e000 0x7f>; /* L3 Interconnect */
656 reg-names = "mpu", "dma";
657 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
660 dma-names = "up_link";
664 mcbsp1: mcbsp@40122000 {
665 compatible = "ti,omap4-mcbsp";
666 reg = <0x40122000 0xff>, /* MPU private access */
667 <0x49022000 0xff>; /* L3 Interconnect */
668 reg-names = "mpu", "dma";
669 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
670 interrupt-names = "common";
671 ti,buffer-size = <128>;
672 ti,hwmods = "mcbsp1";
675 dma-names = "tx", "rx";
679 mcbsp2: mcbsp@40124000 {
680 compatible = "ti,omap4-mcbsp";
681 reg = <0x40124000 0xff>, /* MPU private access */
682 <0x49024000 0xff>; /* L3 Interconnect */
683 reg-names = "mpu", "dma";
684 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
685 interrupt-names = "common";
686 ti,buffer-size = <128>;
687 ti,hwmods = "mcbsp2";
690 dma-names = "tx", "rx";
694 mcbsp3: mcbsp@40126000 {
695 compatible = "ti,omap4-mcbsp";
696 reg = <0x40126000 0xff>, /* MPU private access */
697 <0x49026000 0xff>; /* L3 Interconnect */
698 reg-names = "mpu", "dma";
699 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
700 interrupt-names = "common";
701 ti,buffer-size = <128>;
702 ti,hwmods = "mcbsp3";
705 dma-names = "tx", "rx";
709 mailbox: mailbox@4a0f4000 {
710 compatible = "ti,omap4-mailbox";
711 reg = <0x4a0f4000 0x200>;
712 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
713 ti,hwmods = "mailbox";
715 ti,mbox-num-users = <3>;
716 ti,mbox-num-fifos = <8>;
718 ti,mbox-tx = <0 0 0>;
719 ti,mbox-rx = <1 0 0>;
722 ti,mbox-tx = <3 0 0>;
723 ti,mbox-rx = <2 0 0>;
727 timer1: timer@4ae18000 {
728 compatible = "ti,omap5430-timer";
729 reg = <0x4ae18000 0x80>;
730 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
731 ti,hwmods = "timer1";
735 timer2: timer@48032000 {
736 compatible = "ti,omap5430-timer";
737 reg = <0x48032000 0x80>;
738 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
739 ti,hwmods = "timer2";
742 timer3: timer@48034000 {
743 compatible = "ti,omap5430-timer";
744 reg = <0x48034000 0x80>;
745 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
746 ti,hwmods = "timer3";
749 timer4: timer@48036000 {
750 compatible = "ti,omap5430-timer";
751 reg = <0x48036000 0x80>;
752 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
753 ti,hwmods = "timer4";
756 timer5: timer@40138000 {
757 compatible = "ti,omap5430-timer";
758 reg = <0x40138000 0x80>,
760 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
761 ti,hwmods = "timer5";
766 timer6: timer@4013a000 {
767 compatible = "ti,omap5430-timer";
768 reg = <0x4013a000 0x80>,
770 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
771 ti,hwmods = "timer6";
776 timer7: timer@4013c000 {
777 compatible = "ti,omap5430-timer";
778 reg = <0x4013c000 0x80>,
780 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
781 ti,hwmods = "timer7";
785 timer8: timer@4013e000 {
786 compatible = "ti,omap5430-timer";
787 reg = <0x4013e000 0x80>,
789 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
790 ti,hwmods = "timer8";
795 timer9: timer@4803e000 {
796 compatible = "ti,omap5430-timer";
797 reg = <0x4803e000 0x80>;
798 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
799 ti,hwmods = "timer9";
803 timer10: timer@48086000 {
804 compatible = "ti,omap5430-timer";
805 reg = <0x48086000 0x80>;
806 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
807 ti,hwmods = "timer10";
811 timer11: timer@48088000 {
812 compatible = "ti,omap5430-timer";
813 reg = <0x48088000 0x80>;
814 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
815 ti,hwmods = "timer11";
820 compatible = "ti,omap5-wdt", "ti,omap3-wdt";
821 reg = <0x4ae14000 0x80>;
822 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
823 ti,hwmods = "wd_timer2";
827 compatible = "ti,omap5-dmm";
828 reg = <0x4e000000 0x800>;
829 interrupts = <0 113 0x4>;
833 emif1: emif@4c000000 {
834 compatible = "ti,emif-4d5";
837 phy-type = <2>; /* DDR PHY type: Intelli PHY */
838 reg = <0x4c000000 0x400>;
839 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
840 hw-caps-read-idle-ctrl;
841 hw-caps-ll-interface;
845 emif2: emif@4d000000 {
846 compatible = "ti,emif-4d5";
849 phy-type = <2>; /* DDR PHY type: Intelli PHY */
850 reg = <0x4d000000 0x400>;
851 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
852 hw-caps-read-idle-ctrl;
853 hw-caps-ll-interface;
857 usb3: omap_dwc3@4a020000 {
858 compatible = "ti,dwc3";
859 ti,hwmods = "usb_otg_ss";
860 reg = <0x4a020000 0x10000>;
861 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
862 #address-cells = <1>;
867 compatible = "snps,dwc3";
868 reg = <0x4a030000 0x10000>;
869 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
870 <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
871 <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
872 interrupt-names = "peripheral",
875 phys = <&usb2_phy>, <&usb3_phy>;
876 phy-names = "usb2-phy", "usb3-phy";
877 dr_mode = "peripheral";
882 compatible = "ti,omap-ocp2scp";
883 #address-cells = <1>;
885 reg = <0x4a080000 0x20>;
887 ti,hwmods = "ocp2scp1";
888 usb2_phy: usb2phy@4a084000 {
889 compatible = "ti,omap-usb2";
890 reg = <0x4a084000 0x7c>;
891 syscon-phy-power = <&scm_conf 0x300>;
892 clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
893 clock-names = "wkupclk", "refclk";
897 usb3_phy: usb3phy@4a084400 {
898 compatible = "ti,omap-usb3";
899 reg = <0x4a084400 0x80>,
902 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
903 syscon-phy-power = <&scm_conf 0x370>;
904 clocks = <&usb_phy_cm_clk32k>,
906 <&usb_otg_ss_refclk960m>;
907 clock-names = "wkupclk",
914 usbhstll: usbhstll@4a062000 {
915 compatible = "ti,usbhs-tll";
916 reg = <0x4a062000 0x1000>;
917 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
918 ti,hwmods = "usb_tll_hs";
921 usbhshost: usbhshost@4a064000 {
922 compatible = "ti,usbhs-host";
923 reg = <0x4a064000 0x800>;
924 ti,hwmods = "usb_host_hs";
925 #address-cells = <1>;
928 clocks = <&l3init_60m_fclk>,
931 clock-names = "refclk_60m_int",
935 usbhsohci: ohci@4a064800 {
936 compatible = "ti,ohci-omap3";
937 reg = <0x4a064800 0x400>;
938 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
941 usbhsehci: ehci@4a064c00 {
942 compatible = "ti,ehci-omap";
943 reg = <0x4a064c00 0x400>;
944 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
948 bandgap: bandgap@4a0021e0 {
949 reg = <0x4a0021e0 0xc
953 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
954 compatible = "ti,omap5430-bandgap";
956 #thermal-sensor-cells = <1>;
961 compatible = "ti,omap-ocp2scp";
962 #address-cells = <1>;
964 reg = <0x4a090000 0x20>;
966 ti,hwmods = "ocp2scp3";
967 sata_phy: phy@4a096000 {
968 compatible = "ti,phy-pipe3-sata";
969 reg = <0x4A096000 0x80>, /* phy_rx */
970 <0x4A096400 0x64>, /* phy_tx */
971 <0x4A096800 0x40>; /* pll_ctrl */
972 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
973 syscon-phy-power = <&scm_conf 0x374>;
974 clocks = <&sys_clkin>, <&sata_ref_clk>;
975 clock-names = "sysclk", "refclk";
980 sata: sata@4a141100 {
981 compatible = "snps,dwc-ahci";
982 reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
983 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
985 phy-names = "sata-phy";
986 clocks = <&sata_ref_clk>;
991 compatible = "ti,omap5-dss";
992 reg = <0x58000000 0x80>;
994 ti,hwmods = "dss_core";
995 clocks = <&dss_dss_clk>;
997 #address-cells = <1>;
1002 compatible = "ti,omap5-dispc";
1003 reg = <0x58001000 0x1000>;
1004 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
1005 ti,hwmods = "dss_dispc";
1006 clocks = <&dss_dss_clk>;
1007 clock-names = "fck";
1010 rfbi: encoder@58002000 {
1011 compatible = "ti,omap5-rfbi";
1012 reg = <0x58002000 0x100>;
1013 status = "disabled";
1014 ti,hwmods = "dss_rfbi";
1015 clocks = <&dss_dss_clk>, <&l3_iclk_div>;
1016 clock-names = "fck", "ick";
1019 dsi1: encoder@58004000 {
1020 compatible = "ti,omap5-dsi";
1021 reg = <0x58004000 0x200>,
1024 reg-names = "proto", "phy", "pll";
1025 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
1026 status = "disabled";
1027 ti,hwmods = "dss_dsi1";
1028 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
1029 clock-names = "fck", "sys_clk";
1032 dsi2: encoder@58005000 {
1033 compatible = "ti,omap5-dsi";
1034 reg = <0x58009000 0x200>,
1037 reg-names = "proto", "phy", "pll";
1038 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
1039 status = "disabled";
1040 ti,hwmods = "dss_dsi2";
1041 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
1042 clock-names = "fck", "sys_clk";
1045 hdmi: encoder@58060000 {
1046 compatible = "ti,omap5-hdmi";
1047 reg = <0x58040000 0x200>,
1050 <0x58060000 0x19000>;
1051 reg-names = "wp", "pll", "phy", "core";
1052 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1053 status = "disabled";
1054 ti,hwmods = "dss_hdmi";
1055 clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
1056 clock-names = "fck", "sys_clk";
1058 dma-names = "audio_tx";
1062 abb_mpu: regulator-abb-mpu {
1063 compatible = "ti,abb-v2";
1064 regulator-name = "abb_mpu";
1065 #address-cells = <0>;
1067 clocks = <&sys_clkin>;
1068 ti,settling-time = <50>;
1069 ti,clock-cycles = <16>;
1071 reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
1072 <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
1073 reg-names = "base-address", "int-address",
1074 "efuse-address", "ldo-address";
1075 ti,tranxdone-status-mask = <0x80>;
1076 /* LDOVBBMPU_MUX_CTRL */
1077 ti,ldovbb-override-mask = <0x400>;
1078 /* LDOVBBMPU_VSET_OUT */
1079 ti,ldovbb-vset-mask = <0x1F>;
1082 * NOTE: only FBB mode used but actual vset will
1083 * determine final biasing
1086 /*uV ABB efuse rbb_m fbb_m vset_m*/
1087 1060000 0 0x0 0 0x02000000 0x01F00000
1088 1250000 0 0x4 0 0x02000000 0x01F00000
1092 abb_mm: regulator-abb-mm {
1093 compatible = "ti,abb-v2";
1094 regulator-name = "abb_mm";
1095 #address-cells = <0>;
1097 clocks = <&sys_clkin>;
1098 ti,settling-time = <50>;
1099 ti,clock-cycles = <16>;
1101 reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
1102 <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
1103 reg-names = "base-address", "int-address",
1104 "efuse-address", "ldo-address";
1105 ti,tranxdone-status-mask = <0x80000000>;
1106 /* LDOVBBMM_MUX_CTRL */
1107 ti,ldovbb-override-mask = <0x400>;
1108 /* LDOVBBMM_VSET_OUT */
1109 ti,ldovbb-vset-mask = <0x1F>;
1112 * NOTE: only FBB mode used but actual vset will
1113 * determine final biasing
1116 /*uV ABB efuse rbb_m fbb_m vset_m*/
1117 1025000 0 0x0 0 0x02000000 0x01F00000
1118 1120000 0 0x4 0 0x02000000 0x01F00000
1125 polling-delay = <500>; /* milliseconds */
1128 /include/ "omap54xx-clocks.dtsi"