power: supply: sbs-battery: simplify DT parsing
[deliverable/linux.git] / arch / arm / boot / dts / qcom-msm8974-sony-xperia-honami.dts
1 #include "qcom-msm8974.dtsi"
2 #include "qcom-pm8841.dtsi"
3 #include "qcom-pm8941.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
7
8 / {
9 model = "Sony Xperia Z1";
10 compatible = "sony,xperia-honami", "qcom,msm8974";
11
12 aliases {
13 serial0 = &blsp1_uart2;
14 };
15
16 chosen {
17 stdout-path = "serial0:115200n8";
18 };
19
20 gpio-keys {
21 compatible = "gpio-keys";
22 input-name = "gpio-keys";
23
24 pinctrl-names = "default";
25 pinctrl-0 = <&gpio_keys_pin_a>;
26
27 volume-down {
28 label = "volume_down";
29 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
30 linux,input-type = <1>;
31 linux,code = <KEY_VOLUMEDOWN>;
32 };
33
34 camera-snapshot {
35 label = "camera_snapshot";
36 gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
37 linux,input-type = <1>;
38 linux,code = <KEY_CAMERA>;
39 };
40
41 camera-focus {
42 label = "camera_focus";
43 gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
44 linux,input-type = <1>;
45 linux,code = <KEY_CAMERA_FOCUS>;
46 };
47
48 volume-up {
49 label = "volume_up";
50 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
51 linux,input-type = <1>;
52 linux,code = <KEY_VOLUMEUP>;
53 };
54 };
55
56 memory@0 {
57 reg = <0 0x40000000>, <0x40000000 0x40000000>;
58 device_type = "memory";
59 };
60
61 smd {
62 rpm {
63 rpm_requests {
64 pm8841-regulators {
65 s1 {
66 regulator-min-microvolt = <675000>;
67 regulator-max-microvolt = <1050000>;
68 };
69
70 s2 {
71 regulator-min-microvolt = <500000>;
72 regulator-max-microvolt = <1050000>;
73 };
74
75 s3 {
76 regulator-min-microvolt = <500000>;
77 regulator-max-microvolt = <1050000>;
78 };
79
80 s4 {
81 regulator-min-microvolt = <500000>;
82 regulator-max-microvolt = <1050000>;
83 };
84 };
85
86 pm8941-regulators {
87 vdd_l1_l3-supply = <&pm8941_s1>;
88 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
89 vdd_l4_l11-supply = <&pm8941_s1>;
90 vdd_l5_l7-supply = <&pm8941_s2>;
91 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
92 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
93 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
94 vdd_l21-supply = <&vreg_boost>;
95 vin_5vs-supply = <&pm8941_5v>;
96
97 s1 {
98 regulator-min-microvolt = <1300000>;
99 regulator-max-microvolt = <1300000>;
100 regulator-always-on;
101 regulator-boot-on;
102 };
103
104 s2 {
105 regulator-min-microvolt = <2150000>;
106 regulator-max-microvolt = <2150000>;
107 regulator-boot-on;
108 };
109
110 s3 {
111 regulator-min-microvolt = <1800000>;
112 regulator-max-microvolt = <1800000>;
113 regulator-always-on;
114 regulator-boot-on;
115 };
116
117 s4 {
118 regulator-min-microvolt = <5000000>;
119 regulator-max-microvolt = <5000000>;
120 };
121
122 l1 {
123 regulator-min-microvolt = <1225000>;
124 regulator-max-microvolt = <1225000>;
125
126 regulator-always-on;
127 regulator-boot-on;
128 };
129
130 l2 {
131 regulator-min-microvolt = <1200000>;
132 regulator-max-microvolt = <1200000>;
133 };
134
135 l3 {
136 regulator-min-microvolt = <1200000>;
137 regulator-max-microvolt = <1200000>;
138 };
139
140 l4 {
141 regulator-min-microvolt = <1225000>;
142 regulator-max-microvolt = <1225000>;
143 };
144
145 l5 {
146 regulator-min-microvolt = <1800000>;
147 regulator-max-microvolt = <1800000>;
148 };
149
150 l6 {
151 regulator-min-microvolt = <1800000>;
152 regulator-max-microvolt = <1800000>;
153
154 regulator-boot-on;
155 };
156
157 l7 {
158 regulator-min-microvolt = <1800000>;
159 regulator-max-microvolt = <1800000>;
160
161 regulator-boot-on;
162 };
163
164 l8 {
165 regulator-min-microvolt = <1800000>;
166 regulator-max-microvolt = <1800000>;
167 };
168
169 l9 {
170 regulator-min-microvolt = <1800000>;
171 regulator-max-microvolt = <2950000>;
172 };
173
174 l11 {
175 regulator-min-microvolt = <1300000>;
176 regulator-max-microvolt = <1350000>;
177 };
178
179 l12 {
180 regulator-min-microvolt = <1800000>;
181 regulator-max-microvolt = <1800000>;
182
183 regulator-always-on;
184 regulator-boot-on;
185 };
186
187 l13 {
188 regulator-min-microvolt = <1800000>;
189 regulator-max-microvolt = <2950000>;
190
191 regulator-boot-on;
192 };
193
194 l14 {
195 regulator-min-microvolt = <1800000>;
196 regulator-max-microvolt = <1800000>;
197 };
198
199 l15 {
200 regulator-min-microvolt = <2050000>;
201 regulator-max-microvolt = <2050000>;
202 };
203
204 l16 {
205 regulator-min-microvolt = <2700000>;
206 regulator-max-microvolt = <2700000>;
207 };
208
209 l17 {
210 regulator-min-microvolt = <2700000>;
211 regulator-max-microvolt = <2700000>;
212 };
213
214 l18 {
215 regulator-min-microvolt = <2850000>;
216 regulator-max-microvolt = <2850000>;
217 };
218
219 l19 {
220 regulator-min-microvolt = <3300000>;
221 regulator-max-microvolt = <3300000>;
222 };
223
224 l20 {
225 regulator-min-microvolt = <2950000>;
226 regulator-max-microvolt = <2950000>;
227
228 regulator-allow-set-load;
229 regulator-boot-on;
230 regulator-system-load = <200000>;
231 };
232
233 l21 {
234 regulator-min-microvolt = <2950000>;
235 regulator-max-microvolt = <2950000>;
236
237 regulator-boot-on;
238 };
239
240 l22 {
241 regulator-min-microvolt = <3000000>;
242 regulator-max-microvolt = <3000000>;
243 };
244
245 l23 {
246 regulator-min-microvolt = <2800000>;
247 regulator-max-microvolt = <2800000>;
248 };
249
250 l24 {
251 regulator-min-microvolt = <3075000>;
252 regulator-max-microvolt = <3075000>;
253
254 regulator-boot-on;
255 };
256 };
257 };
258 };
259 };
260
261 vreg_boost: vreg-boost {
262 compatible = "regulator-fixed";
263
264 regulator-name = "vreg-boost";
265 regulator-min-microvolt = <3150000>;
266 regulator-max-microvolt = <3150000>;
267
268 regulator-always-on;
269 regulator-boot-on;
270
271 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
272 enable-active-high;
273
274 pinctrl-names = "default";
275 pinctrl-0 = <&boost_bypass_n_pin>;
276 };
277 };
278
279 &soc {
280 sdhci@f9824900 {
281 status = "ok";
282
283 vmmc-supply = <&pm8941_l20>;
284 vqmmc-supply = <&pm8941_s3>;
285
286 bus-width = <8>;
287 non-removable;
288
289 pinctrl-names = "default";
290 pinctrl-0 = <&sdhc1_pin_a>;
291 };
292
293 sdhci@f98a4900 {
294 status = "ok";
295
296 bus-width = <4>;
297
298 vmmc-supply = <&pm8941_l21>;
299 vqmmc-supply = <&pm8941_l13>;
300
301 cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
302
303 pinctrl-names = "default";
304 pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
305 };
306
307 serial@f991e000 {
308 status = "ok";
309
310 pinctrl-names = "default";
311 pinctrl-0 = <&blsp1_uart2_pin_a>;
312 };
313
314 pinctrl@fd510000 {
315 blsp1_uart2_pin_a: blsp1-uart2-pin-active {
316 rx {
317 pins = "gpio5";
318 function = "blsp_uart2";
319
320 drive-strength = <2>;
321 bias-pull-up;
322 };
323
324 tx {
325 pins = "gpio4";
326 function = "blsp_uart2";
327
328 drive-strength = <4>;
329 bias-disable;
330 };
331 };
332
333 sdhc1_pin_a: sdhc1-pin-active {
334 clk {
335 pins = "sdc1_clk";
336 drive-strength = <16>;
337 bias-disable;
338 };
339
340 cmd-data {
341 pins = "sdc1_cmd", "sdc1_data";
342 drive-strength = <10>;
343 bias-pull-up;
344 };
345 };
346
347 sdhc2_cd_pin_a: sdhc2-cd-pin-active {
348 pins = "gpio62";
349 function = "gpio";
350
351 drive-strength = <2>;
352 bias-disable;
353 };
354
355 sdhc2_pin_a: sdhc2-pin-active {
356 clk {
357 pins = "sdc2_clk";
358 drive-strength = <10>;
359 bias-disable;
360 };
361
362 cmd-data {
363 pins = "sdc2_cmd", "sdc2_data";
364 drive-strength = <6>;
365 bias-pull-up;
366 };
367 };
368
369 };
370
371 dma-controller@f9944000 {
372 qcom,controlled-remotely;
373 };
374 };
375
376 &spmi_bus {
377 pm8941@0 {
378 charger@1000 {
379 qcom,fast-charge-safe-current = <1500000>;
380 qcom,fast-charge-current-limit = <1500000>;
381 qcom,dc-current-limit = <1800000>;
382 qcom,fast-charge-safe-voltage = <4400000>;
383 qcom,fast-charge-high-threshold-voltage = <4350000>;
384 qcom,fast-charge-low-threshold-voltage = <3400000>;
385 qcom,auto-recharge-threshold-voltage = <4200000>;
386 qcom,minimum-input-voltage = <4300000>;
387 };
388
389 gpios@c000 {
390 boost_bypass_n_pin: boost-bypass {
391 pins = "gpio21";
392 function = "normal";
393 };
394
395 gpio_keys_pin_a: gpio-keys-active {
396 pins = "gpio2", "gpio3", "gpio4", "gpio5";
397 function = "normal";
398
399 bias-pull-up;
400 power-source = <PM8941_GPIO_S3>;
401 };
402 };
403
404 coincell@2800 {
405 status = "ok";
406 qcom,rset-ohms = <2100>;
407 qcom,vset-millivolts = <3000>;
408 };
409 };
410
411 pm8941@1 {
412 wled@d800 {
413 status = "ok";
414
415 qcom,cs-out;
416 qcom,current-limit = <20>;
417 qcom,current-boost-limit = <805>;
418 qcom,switching-freq = <1600>;
419 qcom,ovp = <29>;
420 qcom,num-strings = <2>;
421 };
422 };
423 };
This page took 0.044071 seconds and 5 git commands to generate.