arch/m68k/coldfire/head.S

   1 /*****************************************************************************/
   2
   3 /*
   4  *      head.S -- common startup code for ColdFire CPUs.
   5  *
   6  *      (C) Copyright 1999-2011, Greg Ungerer <gerg@snapgear.com>.
   7  */
   8
   9 /*****************************************************************************/
  10
  11 #include <linux/linkage.h>
  12 #include <linux/init.h>
  13 #include <asm/asm-offsets.h>
  14 #include <asm/coldfire.h>
  15 #include <asm/mcfsim.h>
  16 #include <asm/mcfmmu.h>
  17 #include <asm/thread_info.h>
  18
  19 /*****************************************************************************/
  20
  21 /*
  22  *      If we don't have a fixed memory size, then lets build in code
  23  *      to auto detect the DRAM size. Obviously this is the preferred
  24  *      method, and should work for most boards. It won't work for those
  25  *      that do not have their RAM starting at address 0, and it only
  26  *      works on SDRAM (not boards fitted with SRAM).
  27  */
  28 #if CONFIG_RAMSIZE != 0
  29 .macro GET_MEM_SIZE
  30         movel   #CONFIG_RAMSIZE,%d0     /* hard coded memory size */
  31 .endm
  32
  33 #elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
  34       defined(CONFIG_M5249) || defined(CONFIG_M525x) || \
  35       defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
  36       defined(CONFIG_M5307) || defined(CONFIG_M5407)
  37 /*
  38  *      Not all these devices have exactly the same DRAM controller,
  39  *      but the DCMR register is virtually identical - give or take
  40  *      a couple of bits. The only exception is the 5272 devices, their
  41  *      DRAM controller is quite different.
  42  */
  43 .macro GET_MEM_SIZE
  44         movel   MCFSIM_DMR0,%d0         /* get mask for 1st bank */
  45         btst    #0,%d0                  /* check if region enabled */
  46         beq     1f
  47         andl    #0xfffc0000,%d0
  48         beq     1f
  49         addl    #0x00040000,%d0         /* convert mask to size */
  50 1:
  51         movel   MCFSIM_DMR1,%d1         /* get mask for 2nd bank */
  52         btst    #0,%d1                  /* check if region enabled */
  53         beq     2f
  54         andl    #0xfffc0000,%d1
  55         beq     2f
  56         addl    #0x00040000,%d1
  57         addl    %d1,%d0                 /* total mem size in d0 */
  58 2:
  59 .endm
  60
  61 #elif defined(CONFIG_M5272)
  62 .macro GET_MEM_SIZE
  63         movel   MCFSIM_CSOR7,%d0        /* get SDRAM address mask */
  64         andil   #0xfffff000,%d0         /* mask out chip select options */
  65         negl    %d0                     /* negate bits */
  66 .endm
  67
  68 #elif defined(CONFIG_M520x)
  69 .macro GET_MEM_SIZE
  70         clrl    %d0
  71         movel   MCFSIM_SDCS0, %d2       /* Get SDRAM chip select 0 config */
  72         andl    #0x1f, %d2              /* Get only the chip select size */
  73         beq     3f                      /* Check if it is enabled */
  74         addql   #1, %d2                 /* Form exponent */
  75         moveql  #1, %d0
  76         lsll    %d2, %d0                /* 2 ^ exponent */
  77 3:
  78         movel   MCFSIM_SDCS1, %d2       /* Get SDRAM chip select 1 config */
  79         andl    #0x1f, %d2              /* Get only the chip select size */
  80         beq     4f                      /* Check if it is enabled */
  81         addql   #1, %d2                 /* Form exponent */
  82         moveql  #1, %d1
  83         lsll    %d2, %d1                /* 2 ^ exponent */
  84         addl    %d1, %d0                /* Total size of SDRAM in d0 */
  85 4:
  86 .endm
  87
  88 #else
  89 #error "ERROR: I don't know how to probe your boards memory size?"
  90 #endif
  91
  92 /*****************************************************************************/
  93
  94 /*
  95  *      Boards and platforms can do specific early hardware setup if
  96  *      they need to. Most don't need this, define away if not required.
  97  */
  98 #ifndef PLATFORM_SETUP
  99 #define PLATFORM_SETUP
 100 #endif
 101
 102 /*****************************************************************************/
 103
 104 .global _start
 105 .global _rambase
 106 .global _ramvec
 107 .global _ramstart
 108 .global _ramend
 109 #if defined(CONFIG_UBOOT)
 110 .global _init_sp
 111 #endif
 112
 113 /*****************************************************************************/
 114
 115 .data
 116
 117 /*
 118  *      During startup we store away the RAM setup. These are not in the
 119  *      bss, since their values are determined and written before the bss
 120  *      has been cleared.
 121  */
 122 _rambase:
 123 .long   0
 124 _ramvec:
 125 .long   0
 126 _ramstart:
 127 .long   0
 128 _ramend:
 129 .long   0
 130 #if defined(CONFIG_UBOOT)
 131 _init_sp:
 132 .long   0
 133 #endif
 134
 135 /*****************************************************************************/
 136
 137 __HEAD
 138
 139 #ifdef CONFIG_MMU
 140 _start0:
 141         jmp     _start
 142 .global kernel_pg_dir
 143 .equ    kernel_pg_dir,_start0
 144 .equ    .,_start0+0x1000
 145 #endif
 146
 147 /*
 148  *      This is the codes first entry point. This is where it all
 149  *      begins...
 150  */
 151
 152 _start:
 153         nop                                     /* filler */
 154         movew   #0x2700, %sr                    /* no interrupts */
 155         movel   #CACHE_INIT,%d0                 /* disable cache */
 156         movec   %d0,%CACR
 157         nop
 158 #if defined(CONFIG_UBOOT)
 159         movel   %sp,_init_sp                    /* save initial stack pointer */
 160 #endif
 161 #ifdef CONFIG_MBAR
 162         movel   #CONFIG_MBAR+1,%d0              /* configured MBAR address */
 163         movec   %d0,%MBAR                       /* set it */
 164 #endif
 165
 166         /*
 167          *      Do any platform or board specific setup now. Most boards
 168          *      don't need anything. Those exceptions are define this in
 169          *      their board specific includes.
 170          */
 171         PLATFORM_SETUP
 172
 173         /*
 174          *      Create basic memory configuration. Set VBR accordingly,
 175          *      and size memory.
 176          */
 177         movel   #CONFIG_VECTORBASE,%a7
 178         movec   %a7,%VBR                        /* set vectors addr */
 179         movel   %a7,_ramvec
 180
 181         movel   #CONFIG_RAMBASE,%a7             /* mark the base of RAM */
 182         movel   %a7,_rambase
 183
 184         GET_MEM_SIZE                            /* macro code determines size */
 185         addl    %a7,%d0
 186         movel   %d0,_ramend                     /* set end ram addr */
 187
 188         /*
 189          *      Now that we know what the memory is, lets enable cache
 190          *      and get things moving. This is Coldfire CPU specific. Not
 191          *      all version cores have identical cache register setup. But
 192          *      it is very similar. Define the exact settings in the headers
 193          *      then the code here is the same for all.
 194          */
 195         movel   #ACR0_MODE,%d0                  /* set RAM region for caching */
 196         movec   %d0,%ACR0
 197         movel   #ACR1_MODE,%d0                  /* anything else to cache? */
 198         movec   %d0,%ACR1
 199 #ifdef ACR2_MODE
 200         movel   #ACR2_MODE,%d0
 201         movec   %d0,%ACR2
 202         movel   #ACR3_MODE,%d0
 203         movec   %d0,%ACR3
 204 #endif
 205         movel   #CACHE_MODE,%d0                 /* enable cache */
 206         movec   %d0,%CACR
 207         nop
 208
 209 #ifdef CONFIG_MMU
 210         /*
 211          *      Identity mapping for the kernel region.
 212          */
 213         movel   #(MMUBASE+1),%d0                /* enable MMUBAR registers */
 214         movec   %d0,%MMUBAR
 215         movel   #MMUOR_CA,%d0                   /* clear TLB entries */
 216         movel   %d0,MMUOR
 217         movel   #0,%d0                          /* set ASID to 0 */
 218         movec   %d0,%asid
 219
 220         movel   #MMUCR_EN,%d0                   /* Enable the identity map */
 221         movel   %d0,MMUCR
 222         nop                                     /* sync i-pipeline */
 223
 224         movel   #_vstart,%a0                    /* jump to "virtual" space */
 225         jmp     %a0@
 226 _vstart:
 227 #endif /* CONFIG_MMU */
 228
 229 #ifdef CONFIG_ROMFS_FS
 230         /*
 231          *      Move ROM filesystem above bss :-)
 232          */
 233         lea     __bss_start,%a0                 /* get start of bss */
 234         lea     __bss_stop,%a1                  /* set up destination  */
 235         movel   %a0,%a2                         /* copy of bss start */
 236
 237         movel   8(%a0),%d0                      /* get size of ROMFS */
 238         addql   #8,%d0                          /* allow for rounding */
 239         andl    #0xfffffffc, %d0                /* whole words */
 240
 241         addl    %d0,%a0                         /* copy from end */
 242         addl    %d0,%a1                         /* copy from end */
 243         movel   %a1,_ramstart                   /* set start of ram */
 244
 245 _copy_romfs:
 246         movel   -(%a0),%d0                      /* copy dword */
 247         movel   %d0,-(%a1)
 248         cmpl    %a0,%a2                         /* check if at end */
 249         bne     _copy_romfs
 250
 251 #else /* CONFIG_ROMFS_FS */
 252         lea     __bss_stop,%a1
 253         movel   %a1,_ramstart
 254 #endif /* CONFIG_ROMFS_FS */
 255
 256
 257         /*
 258          *      Zero out the bss region.
 259          */
 260         lea     __bss_start,%a0                 /* get start of bss */
 261         lea     __bss_stop,%a1                  /* get end of bss */
 262         clrl    %d0                             /* set value */
 263 _clear_bss:
 264         movel   %d0,(%a0)+                      /* clear each word */
 265         cmpl    %a0,%a1                         /* check if at end */
 266         bne     _clear_bss
 267
 268         /*
 269          *      Load the current task pointer and stack.
 270          */
 271         lea     init_thread_union,%a0
 272         lea     THREAD_SIZE(%a0),%sp
 273
 274 #ifdef CONFIG_MMU
 275 .global m68k_cputype
 276 .global m68k_mmutype
 277 .global m68k_fputype
 278 .global m68k_machtype
 279         movel   #CPU_COLDFIRE,%d0
 280         movel   %d0,m68k_cputype                /* Mark us as a ColdFire */
 281         movel   #MMU_COLDFIRE,%d0
 282         movel   %d0,m68k_mmutype
 283         movel   #FPU_COLDFIRE,%d0
 284         movel   %d0,m68k_fputype
 285         movel   #MACH_M54XX,%d0
 286         movel   %d0,m68k_machtype               /* Mark us as a 54xx machine */
 287         lea     init_task,%a2                   /* Set "current" init task */
 288 #endif
 289
 290         /*
 291          *      Assembler start up done, start code proper.
 292          */
 293         jsr     start_kernel                    /* start Linux kernel */
 294
 295 _exit:
 296         jmp     _exit                           /* should never get here */
 297
 298 /*****************************************************************************/