lib: lz4: cleanup unaligned access efficiency detection
[deliverable/linux.git] / arch / mips / boot / dts / qca / ar9132_tl_wr1043nd_v1.dts
1 /dts-v1/;
2
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
5
6 #include "ar9132.dtsi"
7
8 / {
9 compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
10 model = "TP-Link TL-WR1043ND Version 1";
11
12 alias {
13 serial0 = "/ahb/apb/uart@18020000";
14 };
15
16 memory@0 {
17 device_type = "memory";
18 reg = <0x0 0x2000000>;
19 };
20
21 extosc: oscillator {
22 compatible = "fixed-clock";
23 #clock-cells = <0>;
24 clock-frequency = <40000000>;
25 };
26
27 ahb {
28 apb {
29 uart@18020000 {
30 status = "okay";
31 };
32
33 pll-controller@18050000 {
34 clocks = <&extosc>;
35 };
36 };
37
38 usb@1b000100 {
39 status = "okay";
40 };
41
42 spi@1f000000 {
43 status = "okay";
44 num-cs = <1>;
45
46 flash@0 {
47 #address-cells = <1>;
48 #size-cells = <1>;
49 compatible = "s25sl064a";
50 reg = <0>;
51 spi-max-frequency = <25000000>;
52
53 partition@0 {
54 label = "u-boot";
55 reg = <0x000000 0x020000>;
56 };
57
58 partition@1 {
59 label = "firmware";
60 reg = <0x020000 0x7D0000>;
61 };
62
63 partition@2 {
64 label = "art";
65 reg = <0x7F0000 0x010000>;
66 read-only;
67 };
68 };
69 };
70 };
71
72 usb-phy {
73 status = "okay";
74 };
75
76 gpio-keys {
77 compatible = "gpio-keys-polled";
78 #address-cells = <1>;
79 #size-cells = <0>;
80
81 poll-interval = <20>;
82 button@0 {
83 label = "reset";
84 linux,code = <KEY_RESTART>;
85 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
86 debounce-interval = <60>;
87 };
88
89 button@1 {
90 label = "qss";
91 linux,code = <KEY_WPS_BUTTON>;
92 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
93 debounce-interval = <60>;
94 };
95 };
96
97 leds {
98 compatible = "gpio-leds";
99 led@0 {
100 label = "tp-link:green:usb";
101 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
102 };
103
104 led@1 {
105 label = "tp-link:green:system";
106 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
107 linux,default-trigger = "heartbeat";
108 };
109
110 led@2 {
111 label = "tp-link:green:qss";
112 gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
113 };
114
115 led@3 {
116 label = "tp-link:green:wlan";
117 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
118 };
119 };
120 };
This page took 0.032254 seconds and 5 git commands to generate.