Linux-2.6.12-rc2
[deliverable/linux.git] / arch / ppc / platforms / ev64260.c
1 /*
2 * arch/ppc/platforms/ev64260.c
3 *
4 * Board setup routines for the Marvell/Galileo EV-64260-BP Evaluation Board.
5 *
6 * Author: Mark A. Greer <mgreer@mvista.com>
7 *
8 * 2001-2003 (c) MontaVista, Software, Inc. This file is licensed under
9 * the terms of the GNU General Public License version 2. This program
10 * is licensed "as is" without any warranty of any kind, whether express
11 * or implied.
12 */
13
14 /*
15 * The EV-64260-BP port is the result of hard work from many people from
16 * many companies. In particular, employees of Marvell/Galileo, Mission
17 * Critical Linux, Xyterra, and MontaVista Software were heavily involved.
18 *
19 * Note: I have not been able to get *all* PCI slots to work reliably
20 * at 66 MHz. I recommend setting jumpers J15 & J16 to short pins 1&2
21 * so that 33 MHz is used. --MAG
22 * Note: The 750CXe and 7450 are not stable with a 125MHz or 133MHz TCLK/SYSCLK.
23 * At 100MHz, they are solid.
24 */
25 #include <linux/config.h>
26
27 #include <linux/delay.h>
28 #include <linux/pci.h>
29 #include <linux/ide.h>
30 #include <linux/irq.h>
31 #include <linux/fs.h>
32 #include <linux/seq_file.h>
33 #include <linux/console.h>
34 #include <linux/initrd.h>
35 #include <linux/root_dev.h>
36 #if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
37 #include <linux/serial.h>
38 #include <linux/tty.h>
39 #include <linux/serial_core.h>
40 #else
41 #include <linux/mv643xx.h>
42 #endif
43 #include <asm/bootinfo.h>
44 #include <asm/machdep.h>
45 #include <asm/mv64x60.h>
46 #include <asm/todc.h>
47 #include <asm/time.h>
48
49 #include <platforms/ev64260.h>
50
51 #define BOARD_VENDOR "Marvell/Galileo"
52 #define BOARD_MACHINE "EV-64260-BP"
53
54 static struct mv64x60_handle bh;
55
56 #if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
57 extern void gen550_progress(char *, unsigned short);
58 extern void gen550_init(int, struct uart_port *);
59 #endif
60
61 static const unsigned int cpu_7xx[16] = { /* 7xx & 74xx (but not 745x) */
62 18, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
63 };
64 static const unsigned int cpu_745x[2][16] = { /* PLL_EXT 0 & 1 */
65 { 1, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0 },
66 { 0, 30, 0, 2, 0, 26, 0, 18, 0, 22, 20, 24, 28, 32, 0, 0 }
67 };
68
69
70 TODC_ALLOC();
71
72 static int
73 ev64260_get_bus_speed(void)
74 {
75 return 100000000;
76 }
77
78 static int
79 ev64260_get_cpu_speed(void)
80 {
81 unsigned long pvr, hid1, pll_ext;
82
83 pvr = PVR_VER(mfspr(SPRN_PVR));
84
85 if (pvr != PVR_VER(PVR_7450)) {
86 hid1 = mfspr(SPRN_HID1) >> 28;
87 return ev64260_get_bus_speed() * cpu_7xx[hid1]/2;
88 }
89 else {
90 hid1 = (mfspr(SPRN_HID1) & 0x0001e000) >> 13;
91 pll_ext = 0; /* No way to read; must get from schematic */
92 return ev64260_get_bus_speed() * cpu_745x[pll_ext][hid1]/2;
93 }
94 }
95
96 unsigned long __init
97 ev64260_find_end_of_memory(void)
98 {
99 return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
100 MV64x60_TYPE_GT64260A);
101 }
102
103 /*
104 * Marvell/Galileo EV-64260-BP Evaluation Board PCI interrupt routing.
105 * Note: By playing with J8 and JP1-4, you can get 2 IRQ's from the first
106 * PCI bus (in which cast, INTPIN B would be EV64260_PCI_1_IRQ).
107 * This is the most IRQs you can get from one bus with this board, though.
108 */
109 static int __init
110 ev64260_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
111 {
112 struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
113
114 if (hose->index == 0) {
115 static char pci_irq_table[][4] =
116 /*
117 * PCI IDSEL/INTPIN->INTLINE
118 * A B C D
119 */
120 {
121 {EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 0 */
122 {EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 0 */
123 };
124
125 const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
126 return PCI_IRQ_TABLE_LOOKUP;
127 }
128 else {
129 static char pci_irq_table[][4] =
130 /*
131 * PCI IDSEL/INTPIN->INTLINE
132 * A B C D
133 */
134 {
135 { EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 1 */
136 { EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 1 */
137 };
138
139 const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
140 return PCI_IRQ_TABLE_LOOKUP;
141 }
142 }
143
144 static void __init
145 ev64260_setup_peripherals(void)
146 {
147 mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
148 EV64260_EMB_FLASH_BASE, EV64260_EMB_FLASH_SIZE, 0);
149 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
150 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
151 EV64260_EXT_SRAM_BASE, EV64260_EXT_SRAM_SIZE, 0);
152 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
153 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
154 EV64260_TODC_BASE, EV64260_TODC_SIZE, 0);
155 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
156 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
157 EV64260_UART_BASE, EV64260_UART_SIZE, 0);
158 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
159 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
160 EV64260_EXT_FLASH_BASE, EV64260_EXT_FLASH_SIZE, 0);
161 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
162
163 TODC_INIT(TODC_TYPE_DS1501, 0, 0,
164 ioremap(EV64260_TODC_BASE, EV64260_TODC_SIZE), 8);
165
166 mv64x60_clr_bits(&bh, MV64x60_CPU_CONFIG,((1<<12) | (1<<28) | (1<<29)));
167 mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<27));
168
169 if (ev64260_get_bus_speed() > 100000000)
170 mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<23));
171
172 mv64x60_set_bits(&bh, MV64x60_PCI0_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
173 mv64x60_set_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
174
175 /*
176 * Enabling of PCI internal-vs-external arbitration
177 * is a platform- and errata-dependent decision.
178 */
179 if (bh.type == MV64x60_TYPE_GT64260A ) {
180 mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
181 mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
182 }
183
184 mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
185
186 /*
187 * Turn off timer/counters. Not turning off watchdog timer because
188 * can't read its reg on the 64260A so don't know if we'll be enabling
189 * or disabling.
190 */
191 mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
192 ((1<<0) | (1<<8) | (1<<16) | (1<<24)));
193 mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
194 ((1<<0) | (1<<8) | (1<<16) | (1<<24)));
195
196 /*
197 * Set MPSC Multiplex RMII
198 * NOTE: ethernet driver modifies bit 0 and 1
199 */
200 mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
201
202 /*
203 * The EV-64260-BP uses several Multi-Purpose Pins (MPP) on the 64260
204 * bridge as interrupt inputs (via the General Purpose Ports (GPP)
205 * register). Need to route the MPP inputs to the GPP and set the
206 * polarity correctly.
207 *
208 * In MPP Control 2 Register
209 * MPP 21 -> GPP 21 (DUART channel A intr) bits 20-23 -> 0
210 * MPP 22 -> GPP 22 (DUART channel B intr) bits 24-27 -> 0
211 */
212 mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_2, (0xf<<20) | (0xf<<24) );
213
214 /*
215 * In MPP Control 3 Register
216 * MPP 26 -> GPP 26 (RTC INT) bits 8-11 -> 0
217 * MPP 27 -> GPP 27 (PCI 0 INTA) bits 12-15 -> 0
218 * MPP 29 -> GPP 29 (PCI 1 INTA) bits 20-23 -> 0
219 */
220 mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_3, (0xf<<8)|(0xf<<12)|(0xf<<20));
221
222 #define GPP_EXTERNAL_INTERRUPTS \
223 ((1<<21) | (1<<22) | (1<<26) | (1<<27) | (1<<29))
224 /* DUART & PCI interrupts are inputs */
225 mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
226 /* DUART & PCI interrupts are active low */
227 mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
228
229 /* Clear any pending interrupts for these inputs and enable them. */
230 mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
231 mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
232
233 return;
234 }
235
236 static void __init
237 ev64260_setup_bridge(void)
238 {
239 struct mv64x60_setup_info si;
240 int i;
241
242 memset(&si, 0, sizeof(si));
243
244 si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
245
246 si.pci_0.enable_bus = 1;
247 si.pci_0.pci_io.cpu_base = EV64260_PCI0_IO_CPU_BASE;
248 si.pci_0.pci_io.pci_base_hi = 0;
249 si.pci_0.pci_io.pci_base_lo = EV64260_PCI0_IO_PCI_BASE;
250 si.pci_0.pci_io.size = EV64260_PCI0_IO_SIZE;
251 si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
252 si.pci_0.pci_mem[0].cpu_base = EV64260_PCI0_MEM_CPU_BASE;
253 si.pci_0.pci_mem[0].pci_base_hi = 0;
254 si.pci_0.pci_mem[0].pci_base_lo = EV64260_PCI0_MEM_PCI_BASE;
255 si.pci_0.pci_mem[0].size = EV64260_PCI0_MEM_SIZE;
256 si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
257 si.pci_0.pci_cmd_bits = 0;
258 si.pci_0.latency_timer = 0x8;
259
260 si.pci_1.enable_bus = 1;
261 si.pci_1.pci_io.cpu_base = EV64260_PCI1_IO_CPU_BASE;
262 si.pci_1.pci_io.pci_base_hi = 0;
263 si.pci_1.pci_io.pci_base_lo = EV64260_PCI1_IO_PCI_BASE;
264 si.pci_1.pci_io.size = EV64260_PCI1_IO_SIZE;
265 si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
266 si.pci_1.pci_mem[0].cpu_base = EV64260_PCI1_MEM_CPU_BASE;
267 si.pci_1.pci_mem[0].pci_base_hi = 0;
268 si.pci_1.pci_mem[0].pci_base_lo = EV64260_PCI1_MEM_PCI_BASE;
269 si.pci_1.pci_mem[0].size = EV64260_PCI1_MEM_SIZE;
270 si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
271 si.pci_1.pci_cmd_bits = 0;
272 si.pci_1.latency_timer = 0x8;
273
274 for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
275 si.cpu_prot_options[i] = 0;
276 si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
277 si.pci_0.acc_cntl_options[i] =
278 GT64260_PCI_ACC_CNTL_DREADEN |
279 GT64260_PCI_ACC_CNTL_RDPREFETCH |
280 GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
281 GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
282 GT64260_PCI_ACC_CNTL_SWAP_NONE |
283 GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
284 si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
285 si.pci_1.acc_cntl_options[i] =
286 GT64260_PCI_ACC_CNTL_DREADEN |
287 GT64260_PCI_ACC_CNTL_RDPREFETCH |
288 GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
289 GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
290 GT64260_PCI_ACC_CNTL_SWAP_NONE |
291 GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
292 si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
293 }
294
295 /* Lookup PCI host bridges */
296 if (mv64x60_init(&bh, &si))
297 printk(KERN_ERR "Bridge initialization failed.\n");
298
299 pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
300 ppc_md.pci_swizzle = common_swizzle;
301 ppc_md.pci_map_irq = ev64260_map_irq;
302 ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
303
304 mv64x60_set_bus(&bh, 0, 0);
305 bh.hose_a->first_busno = 0;
306 bh.hose_a->last_busno = 0xff;
307 bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
308
309 bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
310 mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
311 bh.hose_b->last_busno = 0xff;
312 bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
313 bh.hose_b->first_busno);
314
315 return;
316 }
317
318 #if defined(CONFIG_SERIAL_8250) && !defined(CONFIG_SERIAL_MPSC_CONSOLE)
319 static void __init
320 ev64260_early_serial_map(void)
321 {
322 struct uart_port port;
323 static char first_time = 1;
324
325 if (first_time) {
326 memset(&port, 0, sizeof(port));
327
328 port.membase = ioremap(EV64260_SERIAL_0, EV64260_UART_SIZE);
329 port.irq = EV64260_UART_0_IRQ;
330 port.uartclk = BASE_BAUD * 16;
331 port.regshift = 2;
332 port.iotype = SERIAL_IO_MEM;
333 port.flags = STD_COM_FLAGS;
334
335 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
336 gen550_init(0, &port);
337 #endif
338
339 if (early_serial_setup(&port) != 0)
340 printk(KERN_WARNING "Early serial init of port 0"
341 "failed\n");
342
343 first_time = 0;
344 }
345
346 return;
347 }
348 #elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
349 static void __init
350 ev64260_early_serial_map(void)
351 {
352 }
353 #endif
354
355 static void __init
356 ev64260_setup_arch(void)
357 {
358 if (ppc_md.progress)
359 ppc_md.progress("ev64260_setup_arch: enter", 0);
360
361 #ifdef CONFIG_BLK_DEV_INITRD
362 if (initrd_start)
363 ROOT_DEV = Root_RAM0;
364 else
365 #endif
366 #ifdef CONFIG_ROOT_NFS
367 ROOT_DEV = Root_NFS;
368 #else
369 ROOT_DEV = Root_SDA2;
370 #endif
371
372 if (ppc_md.progress)
373 ppc_md.progress("ev64260_setup_arch: Enabling L2 cache", 0);
374
375 /* Enable L2 and L3 caches (if 745x) */
376 _set_L2CR(_get_L2CR() | L2CR_L2E);
377 _set_L3CR(_get_L3CR() | L3CR_L3E);
378
379 if (ppc_md.progress)
380 ppc_md.progress("ev64260_setup_arch: Initializing bridge", 0);
381
382 ev64260_setup_bridge(); /* set up PCI bridge(s) */
383 ev64260_setup_peripherals(); /* set up chip selects/GPP/MPP etc */
384
385 if (ppc_md.progress)
386 ppc_md.progress("ev64260_setup_arch: bridge init complete", 0);
387
388 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_MPSC_CONSOLE)
389 ev64260_early_serial_map();
390 #endif
391
392 printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc."
393 "(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
394
395 if (ppc_md.progress)
396 ppc_md.progress("ev64260_setup_arch: exit", 0);
397
398 return;
399 }
400
401 /* Platform device data fixup routines. */
402 #if defined(CONFIG_SERIAL_MPSC)
403 static void __init
404 ev64260_fixup_mpsc_pdata(struct platform_device *pdev)
405 {
406 struct mpsc_pdata *pdata;
407
408 pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
409
410 pdata->max_idle = 40;
411 pdata->default_baud = EV64260_DEFAULT_BAUD;
412 pdata->brg_clk_src = EV64260_MPSC_CLK_SRC;
413 pdata->brg_clk_freq = EV64260_MPSC_CLK_FREQ;
414
415 return;
416 }
417
418 static int __init
419 ev64260_platform_notify(struct device *dev)
420 {
421 static struct {
422 char *bus_id;
423 void ((*rtn)(struct platform_device *pdev));
424 } dev_map[] = {
425 { MPSC_CTLR_NAME ".0", ev64260_fixup_mpsc_pdata },
426 { MPSC_CTLR_NAME ".1", ev64260_fixup_mpsc_pdata },
427 };
428 struct platform_device *pdev;
429 int i;
430
431 if (dev && dev->bus_id)
432 for (i=0; i<ARRAY_SIZE(dev_map); i++)
433 if (!strncmp(dev->bus_id, dev_map[i].bus_id,
434 BUS_ID_SIZE)) {
435
436 pdev = container_of(dev,
437 struct platform_device, dev);
438 dev_map[i].rtn(pdev);
439 }
440
441 return 0;
442 }
443 #endif
444
445 static void
446 ev64260_reset_board(void *addr)
447 {
448 local_irq_disable();
449
450 /* disable and invalidate the L2 cache */
451 _set_L2CR(0);
452 _set_L2CR(0x200000);
453
454 /* flush and disable L1 I/D cache */
455 __asm__ __volatile__
456 ("mfspr 3,1008\n\t"
457 "ori 5,5,0xcc00\n\t"
458 "ori 4,3,0xc00\n\t"
459 "andc 5,3,5\n\t"
460 "sync\n\t"
461 "mtspr 1008,4\n\t"
462 "isync\n\t"
463 "sync\n\t"
464 "mtspr 1008,5\n\t"
465 "isync\n\t"
466 "sync\n\t");
467
468 /* unmap any other random cs's that might overlap with bootcs */
469 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, 0, 0, 0);
470 bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
471 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, 0, 0, 0);
472 bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
473 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, 0, 0, 0);
474 bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
475 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN, 0, 0, 0);
476 bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
477
478 /* map bootrom back in to gt @ reset defaults */
479 mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
480 0xff800000, 8*1024*1024, 0);
481 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
482
483 /* move reg base back to default, setup default pci0 */
484 mv64x60_write(&bh, MV64x60_INTERNAL_SPACE_DECODE,
485 (1<<24) | CONFIG_MV64X60_BASE >> 20);
486
487 /* NOTE: FROM NOW ON no more GT_REGS accesses.. 0x1 is not mapped
488 * via BAT or MMU, and MSR IR/DR is ON */
489 /* SRR0 has system reset vector, SRR1 has default MSR value */
490 /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
491 /* NOTE: assumes reset vector is at 0xfff00100 */
492 __asm__ __volatile__
493 ("mtspr 26, %0\n\t"
494 "li 4,(1<<6)\n\t"
495 "mtspr 27,4\n\t"
496 "rfi\n\t"
497 :: "r" (addr):"r4");
498
499 return;
500 }
501
502 static void
503 ev64260_restart(char *cmd)
504 {
505 volatile ulong i = 10000000;
506
507 ev64260_reset_board((void *)0xfff00100);
508
509 while (i-- > 0);
510 panic("restart failed\n");
511 }
512
513 static void
514 ev64260_halt(void)
515 {
516 local_irq_disable();
517 while (1);
518 /* NOTREACHED */
519 }
520
521 static void
522 ev64260_power_off(void)
523 {
524 ev64260_halt();
525 /* NOTREACHED */
526 }
527
528 static int
529 ev64260_show_cpuinfo(struct seq_file *m)
530 {
531 uint pvid;
532
533 pvid = mfspr(SPRN_PVR);
534 seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
535 seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
536 seq_printf(m, "cpu MHz\t\t: %d\n", ev64260_get_cpu_speed()/1000/1000);
537 seq_printf(m, "bus MHz\t\t: %d\n", ev64260_get_bus_speed()/1000/1000);
538
539 return 0;
540 }
541
542 /* DS1501 RTC has too much variation to use RTC for calibration */
543 static void __init
544 ev64260_calibrate_decr(void)
545 {
546 ulong freq;
547
548 freq = ev64260_get_bus_speed()/4;
549
550 printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
551 freq/1000000, freq%1000000);
552
553 tb_ticks_per_jiffy = freq / HZ;
554 tb_to_us = mulhwu_scale_factor(freq, 1000000);
555
556 return;
557 }
558
559 /*
560 * Set BAT 3 to map 0xfb000000 to 0xfc000000 of physical memory space.
561 */
562 static __inline__ void
563 ev64260_set_bat(void)
564 {
565 mb();
566 mtspr(SPRN_DBAT1U, 0xfb0001fe);
567 mtspr(SPRN_DBAT1L, 0xfb00002a);
568 mb();
569
570 return;
571 }
572
573 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
574 static void __init
575 ev64260_map_io(void)
576 {
577 io_block_mapping(0xfb000000, 0xfb000000, 0x01000000, _PAGE_IO);
578 }
579 #endif
580
581 void __init
582 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
583 unsigned long r6, unsigned long r7)
584 {
585 #ifdef CONFIG_BLK_DEV_INITRD
586 extern int initrd_below_start_ok;
587
588 initrd_start=initrd_end=0;
589 initrd_below_start_ok=0;
590 #endif /* CONFIG_BLK_DEV_INITRD */
591
592 parse_bootinfo(find_bootinfo());
593
594 isa_mem_base = 0;
595 isa_io_base = EV64260_PCI0_IO_CPU_BASE;
596 pci_dram_offset = EV64260_PCI0_MEM_CPU_BASE;
597
598 loops_per_jiffy = ev64260_get_cpu_speed() / HZ;
599
600 ppc_md.setup_arch = ev64260_setup_arch;
601 ppc_md.show_cpuinfo = ev64260_show_cpuinfo;
602 ppc_md.init_IRQ = gt64260_init_irq;
603 ppc_md.get_irq = gt64260_get_irq;
604
605 ppc_md.restart = ev64260_restart;
606 ppc_md.power_off = ev64260_power_off;
607 ppc_md.halt = ev64260_halt;
608
609 ppc_md.find_end_of_memory = ev64260_find_end_of_memory;
610
611 ppc_md.init = NULL;
612
613 ppc_md.time_init = todc_time_init;
614 ppc_md.set_rtc_time = todc_set_rtc_time;
615 ppc_md.get_rtc_time = todc_get_rtc_time;
616 ppc_md.nvram_read_val = todc_direct_read_val;
617 ppc_md.nvram_write_val = todc_direct_write_val;
618 ppc_md.calibrate_decr = ev64260_calibrate_decr;
619
620 bh.p_base = CONFIG_MV64X60_NEW_BASE;
621
622 ev64260_set_bat();
623
624 #ifdef CONFIG_SERIAL_8250
625 #if defined(CONFIG_SERIAL_TEXT_DEBUG)
626 ppc_md.setup_io_mappings = ev64260_map_io;
627 ppc_md.progress = gen550_progress;
628 #endif
629 #if defined(CONFIG_KGDB)
630 ppc_md.setup_io_mappings = ev64260_map_io;
631 ppc_md.early_serial_map = ev64260_early_serial_map;
632 #endif
633 #elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
634 #ifdef CONFIG_SERIAL_TEXT_DEBUG
635 ppc_md.setup_io_mappings = ev64260_map_io;
636 ppc_md.progress = mv64x60_mpsc_progress;
637 mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
638 #endif /* CONFIG_SERIAL_TEXT_DEBUG */
639 #ifdef CONFIG_KGDB
640 ppc_md.setup_io_mappings = ev64260_map_io;
641 ppc_md.early_serial_map = ev64260_early_serial_map;
642 #endif /* CONFIG_KGDB */
643
644 #endif
645
646 #if defined(CONFIG_SERIAL_MPSC)
647 platform_notify = ev64260_platform_notify;
648 #endif
649
650 return;
651 }
This page took 0.11445 seconds and 5 git commands to generate.