Merge remote-tracking branch 'tip/auto-latest'

[deliverable/linux.git] / arch / x86 / kernel / traps.c

/*
 *  Copyright (C) 1991, 1992  Linus Torvalds
 *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
 *
 *  Pentium III FXSR, SSE support
 *      Gareth Hughes <gareth@valinux.com>, May 2000
 */

/*
 * Handle hardware traps and faults.
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/context_tracking.h>
#include <linux/interrupt.h>
#include <linux/kallsyms.h>
#include <linux/spinlock.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
#include <linux/kdebug.h>
#include <linux/kgdb.h>
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/ptrace.h>
#include <linux/uprobes.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/kexec.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/bug.h>
#include <linux/nmi.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/io.h>

#ifdef CONFIG_EISA
#include <linux/ioport.h>
#include <linux/eisa.h>
#endif

#if defined(CONFIG_EDAC)
#include <linux/edac.h>
#endif

#include <asm/kmemcheck.h>
#include <asm/stacktrace.h>
#include <asm/processor.h>
#include <asm/debugreg.h>
#include <linux/atomic.h>
#include <asm/text-patching.h>
#include <asm/ftrace.h>
#include <asm/traps.h>
#include <asm/desc.h>
#include <asm/fpu/internal.h>
#include <asm/mce.h>
#include <asm/fixmap.h>
#include <asm/mach_traps.h>
#include <asm/alternative.h>
#include <asm/fpu/xstate.h>
#include <asm/trace/mpx.h>
#include <asm/mpx.h>
#include <asm/vm86.h>

#ifdef CONFIG_X86_64
#include <asm/x86_init.h>
#include <asm/pgalloc.h>
#include <asm/proto.h>

/* No need to be aligned, but done to keep all IDTs defined the same way. */
gate_desc debug_idt_table[NR_VECTORS] __page_aligned_bss;
#else
#include <asm/processor-flags.h>
#include <asm/setup.h>
#include <asm/proto.h>
#endif

/* Must be page-aligned because the real IDT is used in a fixmap. */
gate_desc idt_table[NR_VECTORS] __page_aligned_bss;

DECLARE_BITMAP(used_vectors, NR_VECTORS);
EXPORT_SYMBOL_GPL(used_vectors);

static inline void cond_local_irq_enable(struct pt_regs *regs)
{
        if (regs->flags & X86_EFLAGS_IF)
                local_irq_enable();
}

static inline void cond_local_irq_disable(struct pt_regs *regs)
{
        if (regs->flags & X86_EFLAGS_IF)
                local_irq_disable();
}

/*
 * In IST context, we explicitly disable preemption.  This serves two
 * purposes: it makes it much less likely that we would accidentally
 * schedule in IST context and it will force a warning if we somehow
 * manage to schedule by accident.
 */
void ist_enter(struct pt_regs *regs)
{
        if (user_mode(regs)) {
                RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
        } else {
                /*
                 * We might have interrupted pretty much anything.  In
                 * fact, if we're a machine check, we can even interrupt
                 * NMI processing.  We don't want in_nmi() to return true,
                 * but we need to notify RCU.
                 */
                rcu_nmi_enter();
        }

        preempt_disable();

        /* This code is a bit fragile.  Test it. */
        RCU_LOCKDEP_WARN(!rcu_is_watching(), "ist_enter didn't work");
}

void ist_exit(struct pt_regs *regs)
{
        preempt_enable_no_resched();

        if (!user_mode(regs))
                rcu_nmi_exit();
}

/**
 * ist_begin_non_atomic() - begin a non-atomic section in an IST exception
 * @regs:       regs passed to the IST exception handler
 *
 * IST exception handlers normally cannot schedule.  As a special
 * exception, if the exception interrupted userspace code (i.e.
 * user_mode(regs) would return true) and the exception was not
 * a double fault, it can be safe to schedule.  ist_begin_non_atomic()
 * begins a non-atomic section within an ist_enter()/ist_exit() region.
 * Callers are responsible for enabling interrupts themselves inside
 * the non-atomic section, and callers must call ist_end_non_atomic()
 * before ist_exit().
 */
void ist_begin_non_atomic(struct pt_regs *regs)
{
        BUG_ON(!user_mode(regs));

        /*
         * Sanity check: we need to be on the normal thread stack.  This
         * will catch asm bugs and any attempt to use ist_preempt_enable
         * from double_fault.
         */
        BUG_ON((unsigned long)(current_top_of_stack() -
                               current_stack_pointer()) >= THREAD_SIZE);

        preempt_enable_no_resched();
}

/**
 * ist_end_non_atomic() - begin a non-atomic section in an IST exception
 *
 * Ends a non-atomic section started with ist_begin_non_atomic().
 */
void ist_end_non_atomic(void)
{
        preempt_disable();
}

static nokprobe_inline int
do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str,
                  struct pt_regs *regs, long error_code)
{
        if (v8086_mode(regs)) {
                /*
                 * Traps 0, 1, 3, 4, and 5 should be forwarded to vm86.
                 * On nmi (interrupt 2), do_trap should not be called.
                 */
                if (trapnr < X86_TRAP_UD) {
                        if (!handle_vm86_trap((struct kernel_vm86_regs *) regs,
                                                error_code, trapnr))
                                return 0;
                }
                return -1;
        }

        if (!user_mode(regs)) {
                if (!fixup_exception(regs, trapnr)) {
                        tsk->thread.error_code = error_code;
                        tsk->thread.trap_nr = trapnr;
                        die(str, regs, error_code);
                }
                return 0;
        }

        return -1;
}

static siginfo_t *fill_trap_info(struct pt_regs *regs, int signr, int trapnr,
                                siginfo_t *info)
{
        unsigned long siaddr;
        int sicode;

        switch (trapnr) {
        default:
                return SEND_SIG_PRIV;

        case X86_TRAP_DE:
                sicode = FPE_INTDIV;
                siaddr = uprobe_get_trap_addr(regs);
                break;
        case X86_TRAP_UD:
                sicode = ILL_ILLOPN;
                siaddr = uprobe_get_trap_addr(regs);
                break;
        case X86_TRAP_AC:
                sicode = BUS_ADRALN;
                siaddr = 0;
                break;
        }

        info->si_signo = signr;
        info->si_errno = 0;
        info->si_code = sicode;
        info->si_addr = (void __user *)siaddr;
        return info;
}

static void
do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
        long error_code, siginfo_t *info)
{
        struct task_struct *tsk = current;


        if (!do_trap_no_signal(tsk, trapnr, str, regs, error_code))
                return;
        /*
         * We want error_code and trap_nr set for userspace faults and
         * kernelspace faults which result in die(), but not
         * kernelspace faults which are fixed up.  die() gives the
         * process no chance to handle the signal and notice the
         * kernel fault information, so that won't result in polluting
         * the information about previously queued, but not yet
         * delivered, faults.  See also do_general_protection below.
         */
        tsk->thread.error_code = error_code;
        tsk->thread.trap_nr = trapnr;

        if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
            printk_ratelimit()) {
                pr_info("%s[%d] trap %s ip:%lx sp:%lx error:%lx",
                        tsk->comm, tsk->pid, str,
                        regs->ip, regs->sp, error_code);
                print_vma_addr(" in ", regs->ip);
                pr_cont("\n");
        }

        force_sig_info(signr, info ?: SEND_SIG_PRIV, tsk);
}
NOKPROBE_SYMBOL(do_trap);

static void do_error_trap(struct pt_regs *regs, long error_code, char *str,
                          unsigned long trapnr, int signr)
{
        siginfo_t info;

        RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");

        if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) !=
                        NOTIFY_STOP) {
                cond_local_irq_enable(regs);
                do_trap(trapnr, signr, str, regs, error_code,
                        fill_trap_info(regs, signr, trapnr, &info));
        }
}

#define DO_ERROR(trapnr, signr, str, name)                              \
dotraplinkage void do_##name(struct pt_regs *regs, long error_code)     \
{                                                                       \
        do_error_trap(regs, error_code, str, trapnr, signr);            \
}

DO_ERROR(X86_TRAP_DE,     SIGFPE,  "divide error",              divide_error)
DO_ERROR(X86_TRAP_OF,     SIGSEGV, "overflow",                  overflow)
DO_ERROR(X86_TRAP_UD,     SIGILL,  "invalid opcode",            invalid_op)
DO_ERROR(X86_TRAP_OLD_MF, SIGFPE,  "coprocessor segment overrun",coprocessor_segment_overrun)
DO_ERROR(X86_TRAP_TS,     SIGSEGV, "invalid TSS",               invalid_TSS)
DO_ERROR(X86_TRAP_NP,     SIGBUS,  "segment not present",       segment_not_present)
DO_ERROR(X86_TRAP_SS,     SIGBUS,  "stack segment",             stack_segment)
DO_ERROR(X86_TRAP_AC,     SIGBUS,  "alignment check",           alignment_check)

#ifdef CONFIG_VMAP_STACK
__visible void __noreturn handle_stack_overflow(const char *message,
                                                struct pt_regs *regs,
                                                unsigned long fault_address)
{
        printk(KERN_EMERG "BUG: stack guard page was hit at %p (stack is %p..%p)\n",
                 (void *)fault_address, current->stack,
                 (char *)current->stack + THREAD_SIZE - 1);
        die(message, regs, 0);

        /* Be absolutely certain we don't return. */
        panic(message);
}
#endif

#ifdef CONFIG_X86_64
/* Runs on IST stack */
dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
{
        static const char str[] = "double fault";
        struct task_struct *tsk = current;
#ifdef CONFIG_VMAP_STACK
        unsigned long cr2;
#endif

#ifdef CONFIG_X86_ESPFIX64
        extern unsigned char native_irq_return_iret[];

        /*
         * If IRET takes a non-IST fault on the espfix64 stack, then we
         * end up promoting it to a doublefault.  In that case, modify
         * the stack to make it look like we just entered the #GP
         * handler from user space, similar to bad_iret.
         *
         * No need for ist_enter here because we don't use RCU.
         */
        if (((long)regs->sp >> PGDIR_SHIFT) == ESPFIX_PGD_ENTRY &&
                regs->cs == __KERNEL_CS &&
                regs->ip == (unsigned long)native_irq_return_iret)
        {
                struct pt_regs *normal_regs = task_pt_regs(current);

                /* Fake a #GP(0) from userspace. */
                memmove(&normal_regs->ip, (void *)regs->sp, 5*8);
                normal_regs->orig_ax = 0;  /* Missing (lost) #GP error code */
                regs->ip = (unsigned long)general_protection;
                regs->sp = (unsigned long)&normal_regs->orig_ax;

                return;
        }
#endif

        ist_enter(regs);
        notify_die(DIE_TRAP, str, regs, error_code, X86_TRAP_DF, SIGSEGV);

        tsk->thread.error_code = error_code;
        tsk->thread.trap_nr = X86_TRAP_DF;

#ifdef CONFIG_VMAP_STACK
        /*
         * If we overflow the stack into a guard page, the CPU will fail
         * to deliver #PF and will send #DF instead.  Similarly, if we
         * take any non-IST exception while too close to the bottom of
         * the stack, the processor will get a page fault while
         * delivering the exception and will generate a double fault.
         *
         * According to the SDM (footnote in 6.15 under "Interrupt 14 -
         * Page-Fault Exception (#PF):
         *
         *   Processors update CR2 whenever a page fault is detected. If a
         *   second page fault occurs while an earlier page fault is being
         *   deliv- ered, the faulting linear address of the second fault will
         *   overwrite the contents of CR2 (replacing the previous
         *   address). These updates to CR2 occur even if the page fault
         *   results in a double fault or occurs during the delivery of a
         *   double fault.
         *
         * The logic below has a small possibility of incorrectly diagnosing
         * some errors as stack overflows.  For example, if the IDT or GDT
         * gets corrupted such that #GP delivery fails due to a bad descriptor
         * causing #GP and we hit this condition while CR2 coincidentally
         * points to the stack guard page, we'll think we overflowed the
         * stack.  Given that we're going to panic one way or another
         * if this happens, this isn't necessarily worth fixing.
         *
         * If necessary, we could improve the test by only diagnosing
         * a stack overflow if the saved RSP points within 47 bytes of
         * the bottom of the stack: if RSP == tsk_stack + 48 and we
         * take an exception, the stack is already aligned and there
         * will be enough room SS, RSP, RFLAGS, CS, RIP, and a
         * possible error code, so a stack overflow would *not* double
         * fault.  With any less space left, exception delivery could
         * fail, and, as a practical matter, we've overflowed the
         * stack even if the actual trigger for the double fault was
         * something else.
         */
        cr2 = read_cr2();
        if ((unsigned long)task_stack_page(tsk) - 1 - cr2 < PAGE_SIZE)
                handle_stack_overflow("kernel stack overflow (double-fault)", regs, cr2);
#endif

#ifdef CONFIG_DOUBLEFAULT
        df_debug(regs, error_code);
#endif
        /*
         * This is always a kernel trap and never fixable (and thus must
         * never return).
         */
        for (;;)
                die(str, regs, error_code);
}
#endif

dotraplinkage void do_bounds(struct pt_regs *regs, long error_code)
{
        const struct mpx_bndcsr *bndcsr;
        siginfo_t *info;

        RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
        if (notify_die(DIE_TRAP, "bounds", regs, error_code,
                        X86_TRAP_BR, SIGSEGV) == NOTIFY_STOP)
                return;
        cond_local_irq_enable(regs);

        if (!user_mode(regs))
                die("bounds", regs, error_code);

        if (!cpu_feature_enabled(X86_FEATURE_MPX)) {
                /* The exception is not from Intel MPX */
                goto exit_trap;
        }

        /*
         * We need to look at BNDSTATUS to resolve this exception.
         * A NULL here might mean that it is in its 'init state',
         * which is all zeros which indicates MPX was not
         * responsible for the exception.
         */
        bndcsr = get_xsave_field_ptr(XFEATURE_MASK_BNDCSR);
        if (!bndcsr)
                goto exit_trap;

        trace_bounds_exception_mpx(bndcsr);
        /*
         * The error code field of the BNDSTATUS register communicates status
         * information of a bound range exception #BR or operation involving
         * bound directory.
         */
        switch (bndcsr->bndstatus & MPX_BNDSTA_ERROR_CODE) {
        case 2: /* Bound directory has invalid entry. */
                if (mpx_handle_bd_fault())
                        goto exit_trap;
                break; /* Success, it was handled */
        case 1: /* Bound violation. */
                info = mpx_generate_siginfo(regs);
                if (IS_ERR(info)) {
                        /*
                         * We failed to decode the MPX instruction.  Act as if
                         * the exception was not caused by MPX.
                         */
                        goto exit_trap;
                }
                /*
                 * Success, we decoded the instruction and retrieved
                 * an 'info' containing the address being accessed
                 * which caused the exception.  This information
                 * allows and application to possibly handle the
                 * #BR exception itself.
                 */
                do_trap(X86_TRAP_BR, SIGSEGV, "bounds", regs, error_code, info);
                kfree(info);
                break;
        case 0: /* No exception caused by Intel MPX operations. */
                goto exit_trap;
        default:
                die("bounds", regs, error_code);
        }

        return;

exit_trap:
        /*
         * This path out is for all the cases where we could not
         * handle the exception in some way (like allocating a
         * table or telling userspace about it.  We will also end
         * up here if the kernel has MPX turned off at compile
         * time..
         */
        do_trap(X86_TRAP_BR, SIGSEGV, "bounds", regs, error_code, NULL);
}

dotraplinkage void
do_general_protection(struct pt_regs *regs, long error_code)
{
        struct task_struct *tsk;

        RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
        cond_local_irq_enable(regs);

        if (v8086_mode(regs)) {
                local_irq_enable();
                handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
                return;
        }

        tsk = current;
        if (!user_mode(regs)) {
                if (fixup_exception(regs, X86_TRAP_GP))
                        return;

                tsk->thread.error_code = error_code;
                tsk->thread.trap_nr = X86_TRAP_GP;
                if (notify_die(DIE_GPF, "general protection fault", regs, error_code,
                               X86_TRAP_GP, SIGSEGV) != NOTIFY_STOP)
                        die("general protection fault", regs, error_code);
                return;
        }

        tsk->thread.error_code = error_code;
        tsk->thread.trap_nr = X86_TRAP_GP;

        if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
                        printk_ratelimit()) {
                pr_info("%s[%d] general protection ip:%lx sp:%lx error:%lx",
                        tsk->comm, task_pid_nr(tsk),
                        regs->ip, regs->sp, error_code);
                print_vma_addr(" in ", regs->ip);
                pr_cont("\n");
        }

        force_sig_info(SIGSEGV, SEND_SIG_PRIV, tsk);
}
NOKPROBE_SYMBOL(do_general_protection);

/* May run on IST stack. */
dotraplinkage void notrace do_int3(struct pt_regs *regs, long error_code)
{
#ifdef CONFIG_DYNAMIC_FTRACE
        /*
         * ftrace must be first, everything else may cause a recursive crash.
         * See note by declaration of modifying_ftrace_code in ftrace.c
         */
        if (unlikely(atomic_read(&modifying_ftrace_code)) &&
            ftrace_int3_handler(regs))
                return;
#endif
        if (poke_int3_handler(regs))
                return;

        ist_enter(regs);
        RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
        if (kgdb_ll_trap(DIE_INT3, "int3", regs, error_code, X86_TRAP_BP,
                                SIGTRAP) == NOTIFY_STOP)
                goto exit;
#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */

#ifdef CONFIG_KPROBES
        if (kprobe_int3_handler(regs))
                goto exit;
#endif

        if (notify_die(DIE_INT3, "int3", regs, error_code, X86_TRAP_BP,
                        SIGTRAP) == NOTIFY_STOP)
                goto exit;

        /*
         * Let others (NMI) know that the debug stack is in use
         * as we may switch to the interrupt stack.
         */
        debug_stack_usage_inc();
        preempt_disable();
        cond_local_irq_enable(regs);
        do_trap(X86_TRAP_BP, SIGTRAP, "int3", regs, error_code, NULL);
        cond_local_irq_disable(regs);
        preempt_enable_no_resched();
        debug_stack_usage_dec();
exit:
        ist_exit(regs);
}
NOKPROBE_SYMBOL(do_int3);

#ifdef CONFIG_X86_64
/*
 * Help handler running on IST stack to switch off the IST stack if the
 * interrupted code was in user mode. The actual stack switch is done in
 * entry_64.S
 */
asmlinkage __visible notrace struct pt_regs *sync_regs(struct pt_regs *eregs)
{
        struct pt_regs *regs = task_pt_regs(current);
        *regs = *eregs;
        return regs;
}
NOKPROBE_SYMBOL(sync_regs);

struct bad_iret_stack {
        void *error_entry_ret;
        struct pt_regs regs;
};

asmlinkage __visible notrace
struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s)
{
        /*
         * This is called from entry_64.S early in handling a fault
         * caused by a bad iret to user mode.  To handle the fault
         * correctly, we want move our stack frame to task_pt_regs
         * and we want to pretend that the exception came from the
         * iret target.
         */
        struct bad_iret_stack *new_stack =
                container_of(task_pt_regs(current),
                             struct bad_iret_stack, regs);

        /* Copy the IRET target to the new stack. */
        memmove(&new_stack->regs.ip, (void *)s->regs.sp, 5*8);

        /* Copy the remainder of the stack from the current stack. */
        memmove(new_stack, s, offsetof(struct bad_iret_stack, regs.ip));

        BUG_ON(!user_mode(&new_stack->regs));
        return new_stack;
}
NOKPROBE_SYMBOL(fixup_bad_iret);
#endif

static bool is_sysenter_singlestep(struct pt_regs *regs)
{
        /*
         * We don't try for precision here.  If we're anywhere in the region of
         * code that can be single-stepped in the SYSENTER entry path, then
         * assume that this is a useless single-step trap due to SYSENTER
         * being invoked with TF set.  (We don't know in advance exactly
         * which instructions will be hit because BTF could plausibly
         * be set.)
         */
#ifdef CONFIG_X86_32
        return (regs->ip - (unsigned long)__begin_SYSENTER_singlestep_region) <
                (unsigned long)__end_SYSENTER_singlestep_region -
                (unsigned long)__begin_SYSENTER_singlestep_region;
#elif defined(CONFIG_IA32_EMULATION)
        return (regs->ip - (unsigned long)entry_SYSENTER_compat) <
                (unsigned long)__end_entry_SYSENTER_compat -
                (unsigned long)entry_SYSENTER_compat;
#else
        return false;
#endif
}

/*
 * Our handling of the processor debug registers is non-trivial.
 * We do not clear them on entry and exit from the kernel. Therefore
 * it is possible to get a watchpoint trap here from inside the kernel.
 * However, the code in ./ptrace.c has ensured that the user can
 * only set watchpoints on userspace addresses. Therefore the in-kernel
 * watchpoint trap can only occur in code which is reading/writing
 * from user space. Such code must not hold kernel locks (since it
 * can equally take a page fault), therefore it is safe to call
 * force_sig_info even though that claims and releases locks.
 *
 * Code in ./signal.c ensures that the debug control register
 * is restored before we deliver any signal, and therefore that
 * user code runs with the correct debug control register even though
 * we clear it here.
 *
 * Being careful here means that we don't have to be as careful in a
 * lot of more complicated places (task switching can be a bit lazy
 * about restoring all the debug state, and ptrace doesn't have to
 * find every occurrence of the TF bit that could be saved away even
 * by user code)
 *
 * May run on IST stack.
 */
dotraplinkage void do_debug(struct pt_regs *regs, long error_code)
{
        struct task_struct *tsk = current;
        int user_icebp = 0;
        unsigned long dr6;
        int si_code;

        ist_enter(regs);

        get_debugreg(dr6, 6);
        /*
         * The Intel SDM says:
         *
         *   Certain debug exceptions may clear bits 0-3. The remaining
         *   contents of the DR6 register are never cleared by the
         *   processor. To avoid confusion in identifying debug
         *   exceptions, debug handlers should clear the register before
         *   returning to the interrupted task.
         *
         * Keep it simple: clear DR6 immediately.
         */
        set_debugreg(0, 6);

        /* Filter out all the reserved bits which are preset to 1 */
        dr6 &= ~DR6_RESERVED;

        /*
         * The SDM says "The processor clears the BTF flag when it
         * generates a debug exception."  Clear TIF_BLOCKSTEP to keep
         * TIF_BLOCKSTEP in sync with the hardware BTF flag.
         */
        clear_tsk_thread_flag(tsk, TIF_BLOCKSTEP);

        if (unlikely(!user_mode(regs) && (dr6 & DR_STEP) &&
                     is_sysenter_singlestep(regs))) {
                dr6 &= ~DR_STEP;
                if (!dr6)
                        goto exit;
                /*
                 * else we might have gotten a single-step trap and hit a
                 * watchpoint at the same time, in which case we should fall
                 * through and handle the watchpoint.
                 */
        }

        /*
         * If dr6 has no reason to give us about the origin of this trap,
         * then it's very likely the result of an icebp/int01 trap.
         * User wants a sigtrap for that.
         */
        if (!dr6 && user_mode(regs))
                user_icebp = 1;

        /* Catch kmemcheck conditions! */
        if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
                goto exit;

        /* Store the virtualized DR6 value */
        tsk->thread.debugreg6 = dr6;

#ifdef CONFIG_KPROBES
        if (kprobe_debug_handler(regs))
                goto exit;
#endif

        if (notify_die(DIE_DEBUG, "debug", regs, (long)&dr6, error_code,
                                                        SIGTRAP) == NOTIFY_STOP)
                goto exit;

        /*
         * Let others (NMI) know that the debug stack is in use
         * as we may switch to the interrupt stack.
         */
        debug_stack_usage_inc();

        /* It's safe to allow irq's after DR6 has been saved */
        preempt_disable();
        cond_local_irq_enable(regs);

        if (v8086_mode(regs)) {
                handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code,
                                        X86_TRAP_DB);
                cond_local_irq_disable(regs);
                preempt_enable_no_resched();
                debug_stack_usage_dec();
                goto exit;
        }

        if (WARN_ON_ONCE((dr6 & DR_STEP) && !user_mode(regs))) {
                /*
                 * Historical junk that used to handle SYSENTER single-stepping.
                 * This should be unreachable now.  If we survive for a while
                 * without anyone hitting this warning, we'll turn this into
                 * an oops.
                 */
                tsk->thread.debugreg6 &= ~DR_STEP;
                set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
                regs->flags &= ~X86_EFLAGS_TF;
        }
        si_code = get_si_code(tsk->thread.debugreg6);
        if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS) || user_icebp)
                send_sigtrap(tsk, regs, error_code, si_code);
        cond_local_irq_disable(regs);
        preempt_enable_no_resched();
        debug_stack_usage_dec();

exit:
#if defined(CONFIG_X86_32)
        /*
         * This is the most likely code path that involves non-trivial use
         * of the SYSENTER stack.  Check that we haven't overrun it.
         */
        WARN(this_cpu_read(cpu_tss.SYSENTER_stack_canary) != STACK_END_MAGIC,
             "Overran or corrupted SYSENTER stack\n");
#endif
        ist_exit(regs);
}
NOKPROBE_SYMBOL(do_debug);

/*
 * Note that we play around with the 'TS' bit in an attempt to get
 * the correct behaviour even in the presence of the asynchronous
 * IRQ13 behaviour
 */
static void math_error(struct pt_regs *regs, int error_code, int trapnr)
{
        struct task_struct *task = current;
        struct fpu *fpu = &task->thread.fpu;
        siginfo_t info;
        char *str = (trapnr == X86_TRAP_MF) ? "fpu exception" :
                                                "simd exception";

        if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, SIGFPE) == NOTIFY_STOP)
                return;
        cond_local_irq_enable(regs);

        if (!user_mode(regs)) {
                if (!fixup_exception(regs, trapnr)) {
                        task->thread.error_code = error_code;
                        task->thread.trap_nr = trapnr;
                        die(str, regs, error_code);
                }
                return;
        }

        /*
         * Save the info for the exception handler and clear the error.
         */
        fpu__save(fpu);

        task->thread.trap_nr    = trapnr;
        task->thread.error_code = error_code;
        info.si_signo           = SIGFPE;
        info.si_errno           = 0;
        info.si_addr            = (void __user *)uprobe_get_trap_addr(regs);

        info.si_code = fpu__exception_code(fpu, trapnr);

        /* Retry when we get spurious exceptions: */
        if (!info.si_code)
                return;

        force_sig_info(SIGFPE, &info, task);
}

dotraplinkage void do_coprocessor_error(struct pt_regs *regs, long error_code)
{
        RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
        math_error(regs, error_code, X86_TRAP_MF);
}

dotraplinkage void
do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
{
        RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
        math_error(regs, error_code, X86_TRAP_XF);
}

dotraplinkage void
do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
{
        cond_local_irq_enable(regs);
}

dotraplinkage void
do_device_not_available(struct pt_regs *regs, long error_code)
{
        RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");

#ifdef CONFIG_MATH_EMULATION
        if (!boot_cpu_has(X86_FEATURE_FPU) && (read_cr0() & X86_CR0_EM)) {
                struct math_emu_info info = { };

                cond_local_irq_enable(regs);

                info.regs = regs;
                math_emulate(&info);
                return;
        }
#endif
        fpu__restore(&current->thread.fpu); /* interrupts still off */
#ifdef CONFIG_X86_32
        cond_local_irq_enable(regs);
#endif
}
NOKPROBE_SYMBOL(do_device_not_available);

#ifdef CONFIG_X86_32
dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
{
        siginfo_t info;

        RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
        local_irq_enable();

        info.si_signo = SIGILL;
        info.si_errno = 0;
        info.si_code = ILL_BADSTK;
        info.si_addr = NULL;
        if (notify_die(DIE_TRAP, "iret exception", regs, error_code,
                        X86_TRAP_IRET, SIGILL) != NOTIFY_STOP) {
                do_trap(X86_TRAP_IRET, SIGILL, "iret exception", regs, error_code,
                        &info);
        }
}
#endif

/* Set of traps needed for early debugging. */
void __init early_trap_init(void)
{
        /*
         * Don't use IST to set DEBUG_STACK as it doesn't work until TSS
         * is ready in cpu_init() <-- trap_init(). Before trap_init(),
         * CPU runs at ring 0 so it is impossible to hit an invalid
         * stack.  Using the original stack works well enough at this
         * early stage. DEBUG_STACK will be equipped after cpu_init() in
         * trap_init().
         *
         * We don't need to set trace_idt_table like set_intr_gate(),
         * since we don't have trace_debug and it will be reset to
         * 'debug' in trap_init() by set_intr_gate_ist().
         */
        set_intr_gate_notrace(X86_TRAP_DB, debug);
        /* int3 can be called from all */
        set_system_intr_gate(X86_TRAP_BP, &int3);
#ifdef CONFIG_X86_32
        set_intr_gate(X86_TRAP_PF, page_fault);
#endif
        load_idt(&idt_descr);
}

void __init early_trap_pf_init(void)
{
#ifdef CONFIG_X86_64
        set_intr_gate(X86_TRAP_PF, page_fault);
#endif
}

void __init trap_init(void)
{
        int i;

#ifdef CONFIG_EISA
        void __iomem *p = early_ioremap(0x0FFFD9, 4);

        if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
                EISA_bus = 1;
        early_iounmap(p, 4);
#endif

        set_intr_gate(X86_TRAP_DE, divide_error);
        set_intr_gate_ist(X86_TRAP_NMI, &nmi, NMI_STACK);
        /* int4 can be called from all */
        set_system_intr_gate(X86_TRAP_OF, &overflow);
        set_intr_gate(X86_TRAP_BR, bounds);
        set_intr_gate(X86_TRAP_UD, invalid_op);
        set_intr_gate(X86_TRAP_NM, device_not_available);
#ifdef CONFIG_X86_32
        set_task_gate(X86_TRAP_DF, GDT_ENTRY_DOUBLEFAULT_TSS);
#else
        set_intr_gate_ist(X86_TRAP_DF, &double_fault, DOUBLEFAULT_STACK);
#endif
        set_intr_gate(X86_TRAP_OLD_MF, coprocessor_segment_overrun);
        set_intr_gate(X86_TRAP_TS, invalid_TSS);
        set_intr_gate(X86_TRAP_NP, segment_not_present);
        set_intr_gate(X86_TRAP_SS, stack_segment);
        set_intr_gate(X86_TRAP_GP, general_protection);
        set_intr_gate(X86_TRAP_SPURIOUS, spurious_interrupt_bug);
        set_intr_gate(X86_TRAP_MF, coprocessor_error);
        set_intr_gate(X86_TRAP_AC, alignment_check);
#ifdef CONFIG_X86_MCE
        set_intr_gate_ist(X86_TRAP_MC, &machine_check, MCE_STACK);
#endif
        set_intr_gate(X86_TRAP_XF, simd_coprocessor_error);

        /* Reserve all the builtin and the syscall vector: */
        for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
                set_bit(i, used_vectors);

#ifdef CONFIG_IA32_EMULATION
        set_system_intr_gate(IA32_SYSCALL_VECTOR, entry_INT80_compat);
        set_bit(IA32_SYSCALL_VECTOR, used_vectors);
#endif

#ifdef CONFIG_X86_32
        set_system_intr_gate(IA32_SYSCALL_VECTOR, entry_INT80_32);
        set_bit(IA32_SYSCALL_VECTOR, used_vectors);
#endif

        /*
         * Set the IDT descriptor to a fixed read-only location, so that the
         * "sidt" instruction will not leak the location of the kernel, and
         * to defend the IDT against arbitrary memory write vulnerabilities.
         * It will be reloaded in cpu_init() */
        __set_fixmap(FIX_RO_IDT, __pa_symbol(idt_table), PAGE_KERNEL_RO);
        idt_descr.address = fix_to_virt(FIX_RO_IDT);

        /*
         * Should be a barrier for any external CPU state:
         */
        cpu_init();

        /*
         * X86_TRAP_DB and X86_TRAP_BP have been set
         * in early_trap_init(). However, ITS works only after
         * cpu_init() loads TSS. See comments in early_trap_init().
         */
        set_intr_gate_ist(X86_TRAP_DB, &debug, DEBUG_STACK);
        /* int3 can be called from all */
        set_system_intr_gate_ist(X86_TRAP_BP, &int3, DEBUG_STACK);

        x86_init.irqs.trap_init();

#ifdef CONFIG_X86_64
        memcpy(&debug_idt_table, &idt_table, IDT_ENTRIES * 16);
        set_nmi_gate(X86_TRAP_DB, &debug);
        set_nmi_gate(X86_TRAP_BP, &int3);
#endif
}