arch/xtensa/kernel/head.S

   1 /*
   2  * arch/xtensa/kernel/head.S
   3  *
   4  * Xtensa Processor startup code.
   5  *
   6  * This file is subject to the terms and conditions of the GNU General Public
   7  * License.  See the file "COPYING" in the main directory of this archive
   8  * for more details.
   9  *
  10  * Copyright (C) 2001 - 2008 Tensilica Inc.
  11  *
  12  * Chris Zankel <chris@zankel.net>
  13  * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
  14  * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
  15  * Kevin Chea
  16  */
  17
  18 #include <asm/processor.h>
  19 #include <asm/page.h>
  20 #include <asm/cacheasm.h>
  21 #include <asm/initialize_mmu.h>
  22 #include <asm/mxregs.h>
  23
  24 #include <linux/init.h>
  25 #include <linux/linkage.h>
  26
  27 /*
  28  * This module contains the entry code for kernel images. It performs the
  29  * minimal setup needed to call the generic C routines.
  30  *
  31  * Prerequisites:
  32  *
  33  * - The kernel image has been loaded to the actual address where it was
  34  *   compiled to.
  35  * - a2 contains either 0 or a pointer to a list of boot parameters.
  36  *   (see setup.c for more details)
  37  *
  38  */
  39
  40 /*
  41  *  _start
  42  *
  43  *  The bootloader passes a pointer to a list of boot parameters in a2.
  44  */
  45
  46         /* The first bytes of the kernel image must be an instruction, so we
  47          * manually allocate and define the literal constant we need for a jx
  48          * instruction.
  49          */
  50
  51         __HEAD
  52         .begin  no-absolute-literals
  53
  54 ENTRY(_start)
  55
  56         /* Preserve the pointer to the boot parameter list in EXCSAVE_1 */
  57         wsr     a2, excsave1
  58         _j      _SetupOCD
  59
  60         .align  4
  61         .literal_position
  62 .Lstartup:
  63         .word   _startup
  64
  65         .align  4
  66 _SetupOCD:
  67         /*
  68          * Initialize WB, WS, and clear PS.EXCM (to allow loop instructions).
  69          * Set Interrupt Level just below XCHAL_DEBUGLEVEL to allow
  70          * xt-gdb to single step via DEBUG exceptions received directly
  71          * by ocd.
  72          */
  73         movi    a1, 1
  74         movi    a0, 0
  75         wsr     a1, windowstart
  76         wsr     a0, windowbase
  77         rsync
  78
  79         movi    a1, LOCKLEVEL
  80         wsr     a1, ps
  81         rsync
  82
  83         .global _SetupMMU
  84 _SetupMMU:
  85         Offset = _SetupMMU - _start
  86
  87 #ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
  88         initialize_mmu
  89 #if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
  90         rsr     a2, excsave1
  91         movi    a3, 0x08000000
  92         bgeu    a2, a3, 1f
  93         movi    a3, 0xd0000000
  94         add     a2, a2, a3
  95         wsr     a2, excsave1
  96 1:
  97 #endif
  98 #endif
  99         .end    no-absolute-literals
 100
 101         l32r    a0, .Lstartup
 102         jx      a0
 103
 104 ENDPROC(_start)
 105
 106         __REF
 107         .literal_position
 108
 109 ENTRY(_startup)
 110
 111         /* Set a0 to 0 for the remaining initialization. */
 112
 113         movi    a0, 0
 114
 115 #if XCHAL_HAVE_VECBASE
 116         movi    a2, VECBASE_RESET_VADDR
 117         wsr     a2, vecbase
 118 #endif
 119
 120         /* Clear debugging registers. */
 121
 122 #if XCHAL_HAVE_DEBUG
 123 #if XCHAL_NUM_IBREAK > 0
 124         wsr     a0, ibreakenable
 125 #endif
 126         wsr     a0, icount
 127         movi    a1, 15
 128         wsr     a0, icountlevel
 129
 130         .set    _index, 0
 131         .rept   XCHAL_NUM_DBREAK
 132         wsr     a0, SREG_DBREAKC + _index
 133         .set    _index, _index + 1
 134         .endr
 135 #endif
 136
 137         /* Clear CCOUNT (not really necessary, but nice) */
 138
 139         wsr     a0, ccount      # not really necessary, but nice
 140
 141         /* Disable zero-loops. */
 142
 143 #if XCHAL_HAVE_LOOPS
 144         wsr     a0, lcount
 145 #endif
 146
 147         /* Disable all timers. */
 148
 149         .set    _index, 0
 150         .rept   XCHAL_NUM_TIMERS
 151         wsr     a0, SREG_CCOMPARE + _index
 152         .set    _index, _index + 1
 153         .endr
 154
 155         /* Interrupt initialization. */
 156
 157         movi    a2, XCHAL_INTTYPE_MASK_SOFTWARE | XCHAL_INTTYPE_MASK_EXTERN_EDGE
 158         wsr     a0, intenable
 159         wsr     a2, intclear
 160
 161         /* Disable coprocessors. */
 162
 163 #if XCHAL_HAVE_CP
 164         wsr     a0, cpenable
 165 #endif
 166
 167         /*  Initialize the caches.
 168          *  a2, a3 are just working registers (clobbered).
 169          */
 170
 171 #if XCHAL_DCACHE_LINE_LOCKABLE
 172         ___unlock_dcache_all a2 a3
 173 #endif
 174
 175 #if XCHAL_ICACHE_LINE_LOCKABLE
 176         ___unlock_icache_all a2 a3
 177 #endif
 178
 179         ___invalidate_dcache_all a2 a3
 180         ___invalidate_icache_all a2 a3
 181
 182         isync
 183
 184 #ifdef CONFIG_HAVE_SMP
 185         movi    a2, CCON        # MX External Register to Configure Cache
 186         movi    a3, 1
 187         wer     a3, a2
 188 #endif
 189
 190         /* Setup stack and enable window exceptions (keep irqs disabled) */
 191
 192         movi    a1, start_info
 193         l32i    a1, a1, 0
 194
 195         movi    a2, (1 << PS_WOE_BIT) | LOCKLEVEL
 196                                         # WOE=1, INTLEVEL=LOCKLEVEL, UM=0
 197         wsr     a2, ps                  # (enable reg-windows; progmode stack)
 198         rsync
 199
 200 #ifdef CONFIG_SMP
 201         /*
 202          * Notice that we assume with SMP that cores have PRID
 203          * supported by the cores.
 204          */
 205         rsr     a2, prid
 206         bnez    a2, .Lboot_secondary
 207
 208 #endif  /* CONFIG_SMP */
 209
 210         /* Unpack data sections
 211          *
 212          * The linker script used to build the Linux kernel image
 213          * creates a table located at __boot_reloc_table_start
 214          * that contans the information what data needs to be unpacked.
 215          *
 216          * Uses a2-a7.
 217          */
 218
 219         movi    a2, __boot_reloc_table_start
 220         movi    a3, __boot_reloc_table_end
 221
 222 1:      beq     a2, a3, 3f      # no more entries?
 223         l32i    a4, a2, 0       # start destination (in RAM)
 224         l32i    a5, a2, 4       # end desination (in RAM)
 225         l32i    a6, a2, 8       # start source (in ROM)
 226         addi    a2, a2, 12      # next entry
 227         beq     a4, a5, 1b      # skip, empty entry
 228         beq     a4, a6, 1b      # skip, source and dest. are the same
 229
 230 2:      l32i    a7, a6, 0       # load word
 231         addi    a6, a6, 4
 232         s32i    a7, a4, 0       # store word
 233         addi    a4, a4, 4
 234         bltu    a4, a5, 2b
 235         j       1b
 236
 237 3:
 238         /* All code and initialized data segments have been copied.
 239          * Now clear the BSS segment.
 240          */
 241
 242         movi    a2, __bss_start # start of BSS
 243         movi    a3, __bss_stop  # end of BSS
 244
 245         __loopt a2, a3, a4, 2
 246         s32i    a0, a2, 0
 247         __endla a2, a3, 4
 248
 249 #if XCHAL_DCACHE_IS_WRITEBACK
 250
 251         /* After unpacking, flush the writeback cache to memory so the
 252          * instructions/data are available.
 253          */
 254
 255         ___flush_dcache_all a2 a3
 256 #endif
 257         memw
 258         isync
 259         ___invalidate_icache_all a2 a3
 260         isync
 261
 262         movi    a6, 0
 263         xsr     a6, excsave1
 264
 265         /* init_arch kick-starts the linux kernel */
 266
 267         movi    a4, init_arch
 268         callx4  a4
 269
 270         movi    a4, start_kernel
 271         callx4  a4
 272
 273 should_never_return:
 274         j       should_never_return
 275
 276 #ifdef CONFIG_SMP
 277 .Lboot_secondary:
 278
 279         movi    a2, cpu_start_ccount
 280 1:
 281         l32i    a3, a2, 0
 282         beqi    a3, 0, 1b
 283         movi    a3, 0
 284         s32i    a3, a2, 0
 285         memw
 286 1:
 287         l32i    a3, a2, 0
 288         beqi    a3, 0, 1b
 289         wsr     a3, ccount
 290         movi    a3, 0
 291         s32i    a3, a2, 0
 292         memw
 293
 294         movi    a6, 0
 295         wsr     a6, excsave1
 296
 297         movi    a4, secondary_start_kernel
 298         callx4  a4
 299         j       should_never_return
 300
 301 #endif  /* CONFIG_SMP */
 302
 303 ENDPROC(_startup)
 304
 305 #ifdef CONFIG_HOTPLUG_CPU
 306
 307 ENTRY(cpu_restart)
 308
 309 #if XCHAL_DCACHE_IS_WRITEBACK
 310         ___flush_invalidate_dcache_all a2 a3
 311 #else
 312         ___invalidate_dcache_all a2 a3
 313 #endif
 314         memw
 315         movi    a2, CCON        # MX External Register to Configure Cache
 316         movi    a3, 0
 317         wer     a3, a2
 318         extw
 319
 320         rsr     a0, prid
 321         neg     a2, a0
 322         movi    a3, cpu_start_id
 323         s32i    a2, a3, 0
 324 #if XCHAL_DCACHE_IS_WRITEBACK
 325         dhwbi   a3, 0
 326 #endif
 327 1:
 328         l32i    a2, a3, 0
 329         dhi     a3, 0
 330         bne     a2, a0, 1b
 331
 332         /*
 333          * Initialize WB, WS, and clear PS.EXCM (to allow loop instructions).
 334          * Set Interrupt Level just below XCHAL_DEBUGLEVEL to allow
 335          * xt-gdb to single step via DEBUG exceptions received directly
 336          * by ocd.
 337          */
 338         movi    a1, 1
 339         movi    a0, 0
 340         wsr     a1, windowstart
 341         wsr     a0, windowbase
 342         rsync
 343
 344         movi    a1, LOCKLEVEL
 345         wsr     a1, ps
 346         rsync
 347
 348         j       _startup
 349
 350 ENDPROC(cpu_restart)
 351
 352 #endif  /* CONFIG_HOTPLUG_CPU */
 353
 354 /*
 355  * DATA section
 356  */
 357
 358         .section ".data.init.refok"
 359         .align  4
 360 ENTRY(start_info)
 361         .long   init_thread_union + KERNEL_STACK_SIZE
 362
 363 /*
 364  * BSS section
 365  */
 366
 367 __PAGE_ALIGNED_BSS
 368 #ifdef CONFIG_MMU
 369 ENTRY(swapper_pg_dir)
 370         .fill   PAGE_SIZE, 1, 0
 371 END(swapper_pg_dir)
 372 #endif
 373 ENTRY(empty_zero_page)
 374         .fill   PAGE_SIZE, 1, 0
 375 END(empty_zero_page)