Constify target name, reloc name, and carsym name
[deliverable/binutils-gdb.git] / bfd / reloc.c
1 /* BFD support for handling relocation entries.
2 Copyright (C) 1990-2019 Free Software Foundation, Inc.
3 Written by Cygnus Support.
4
5 This file is part of BFD, the Binary File Descriptor library.
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
20 MA 02110-1301, USA. */
21
22 /*
23 SECTION
24 Relocations
25
26 BFD maintains relocations in much the same way it maintains
27 symbols: they are left alone until required, then read in
28 en-masse and translated into an internal form. A common
29 routine <<bfd_perform_relocation>> acts upon the
30 canonical form to do the fixup.
31
32 Relocations are maintained on a per section basis,
33 while symbols are maintained on a per BFD basis.
34
35 All that a back end has to do to fit the BFD interface is to create
36 a <<struct reloc_cache_entry>> for each relocation
37 in a particular section, and fill in the right bits of the structures.
38
39 @menu
40 @* typedef arelent::
41 @* howto manager::
42 @end menu
43
44 */
45
46 /* DO compile in the reloc_code name table from libbfd.h. */
47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
48
49 #include "sysdep.h"
50 #include "bfd.h"
51 #include "bfdlink.h"
52 #include "libbfd.h"
53 #include "bfdver.h"
54 /*
55 DOCDD
56 INODE
57 typedef arelent, howto manager, Relocations, Relocations
58
59 SUBSECTION
60 typedef arelent
61
62 This is the structure of a relocation entry:
63
64 CODE_FRAGMENT
65 .
66 .typedef enum bfd_reloc_status
67 .{
68 . {* No errors detected. Note - the value 2 is used so that it
69 . will not be mistaken for the boolean TRUE or FALSE values. *}
70 . bfd_reloc_ok = 2,
71 .
72 . {* The relocation was performed, but there was an overflow. *}
73 . bfd_reloc_overflow,
74 .
75 . {* The address to relocate was not within the section supplied. *}
76 . bfd_reloc_outofrange,
77 .
78 . {* Used by special functions. *}
79 . bfd_reloc_continue,
80 .
81 . {* Unsupported relocation size requested. *}
82 . bfd_reloc_notsupported,
83 .
84 . {* Unused. *}
85 . bfd_reloc_other,
86 .
87 . {* The symbol to relocate against was undefined. *}
88 . bfd_reloc_undefined,
89 .
90 . {* The relocation was performed, but may not be ok. If this type is
91 . returned, the error_message argument to bfd_perform_relocation
92 . will be set. *}
93 . bfd_reloc_dangerous
94 . }
95 . bfd_reloc_status_type;
96 .
97 .typedef const struct reloc_howto_struct reloc_howto_type;
98 .
99 .typedef struct reloc_cache_entry
100 .{
101 . {* A pointer into the canonical table of pointers. *}
102 . struct bfd_symbol **sym_ptr_ptr;
103 .
104 . {* offset in section. *}
105 . bfd_size_type address;
106 .
107 . {* addend for relocation value. *}
108 . bfd_vma addend;
109 .
110 . {* Pointer to how to perform the required relocation. *}
111 . reloc_howto_type *howto;
112 .
113 .}
114 .arelent;
115 .
116 */
117
118 /*
119 DESCRIPTION
120
121 Here is a description of each of the fields within an <<arelent>>:
122
123 o <<sym_ptr_ptr>>
124
125 The symbol table pointer points to a pointer to the symbol
126 associated with the relocation request. It is the pointer
127 into the table returned by the back end's
128 <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
129 referenced through a pointer to a pointer so that tools like
130 the linker can fix up all the symbols of the same name by
131 modifying only one pointer. The relocation routine looks in
132 the symbol and uses the base of the section the symbol is
133 attached to and the value of the symbol as the initial
134 relocation offset. If the symbol pointer is zero, then the
135 section provided is looked up.
136
137 o <<address>>
138
139 The <<address>> field gives the offset in bytes from the base of
140 the section data which owns the relocation record to the first
141 byte of relocatable information. The actual data relocated
142 will be relative to this point; for example, a relocation
143 type which modifies the bottom two bytes of a four byte word
144 would not touch the first byte pointed to in a big endian
145 world.
146
147 o <<addend>>
148
149 The <<addend>> is a value provided by the back end to be added (!)
150 to the relocation offset. Its interpretation is dependent upon
151 the howto. For example, on the 68k the code:
152
153 | char foo[];
154 | main()
155 | {
156 | return foo[0x12345678];
157 | }
158
159 Could be compiled into:
160
161 | linkw fp,#-4
162 | moveb @@#12345678,d0
163 | extbl d0
164 | unlk fp
165 | rts
166
167 This could create a reloc pointing to <<foo>>, but leave the
168 offset in the data, something like:
169
170 |RELOCATION RECORDS FOR [.text]:
171 |offset type value
172 |00000006 32 _foo
173 |
174 |00000000 4e56 fffc ; linkw fp,#-4
175 |00000004 1039 1234 5678 ; moveb @@#12345678,d0
176 |0000000a 49c0 ; extbl d0
177 |0000000c 4e5e ; unlk fp
178 |0000000e 4e75 ; rts
179
180 Using coff and an 88k, some instructions don't have enough
181 space in them to represent the full address range, and
182 pointers have to be loaded in two parts. So you'd get something like:
183
184 | or.u r13,r0,hi16(_foo+0x12345678)
185 | ld.b r2,r13,lo16(_foo+0x12345678)
186 | jmp r1
187
188 This should create two relocs, both pointing to <<_foo>>, and with
189 0x12340000 in their addend field. The data would consist of:
190
191 |RELOCATION RECORDS FOR [.text]:
192 |offset type value
193 |00000002 HVRT16 _foo+0x12340000
194 |00000006 LVRT16 _foo+0x12340000
195 |
196 |00000000 5da05678 ; or.u r13,r0,0x5678
197 |00000004 1c4d5678 ; ld.b r2,r13,0x5678
198 |00000008 f400c001 ; jmp r1
199
200 The relocation routine digs out the value from the data, adds
201 it to the addend to get the original offset, and then adds the
202 value of <<_foo>>. Note that all 32 bits have to be kept around
203 somewhere, to cope with carry from bit 15 to bit 16.
204
205 One further example is the sparc and the a.out format. The
206 sparc has a similar problem to the 88k, in that some
207 instructions don't have room for an entire offset, but on the
208 sparc the parts are created in odd sized lumps. The designers of
209 the a.out format chose to not use the data within the section
210 for storing part of the offset; all the offset is kept within
211 the reloc. Anything in the data should be ignored.
212
213 | save %sp,-112,%sp
214 | sethi %hi(_foo+0x12345678),%g2
215 | ldsb [%g2+%lo(_foo+0x12345678)],%i0
216 | ret
217 | restore
218
219 Both relocs contain a pointer to <<foo>>, and the offsets
220 contain junk.
221
222 |RELOCATION RECORDS FOR [.text]:
223 |offset type value
224 |00000004 HI22 _foo+0x12345678
225 |00000008 LO10 _foo+0x12345678
226 |
227 |00000000 9de3bf90 ; save %sp,-112,%sp
228 |00000004 05000000 ; sethi %hi(_foo+0),%g2
229 |00000008 f048a000 ; ldsb [%g2+%lo(_foo+0)],%i0
230 |0000000c 81c7e008 ; ret
231 |00000010 81e80000 ; restore
232
233 o <<howto>>
234
235 The <<howto>> field can be imagined as a
236 relocation instruction. It is a pointer to a structure which
237 contains information on what to do with all of the other
238 information in the reloc record and data section. A back end
239 would normally have a relocation instruction set and turn
240 relocations into pointers to the correct structure on input -
241 but it would be possible to create each howto field on demand.
242
243 */
244
245 /*
246 SUBSUBSECTION
247 <<enum complain_overflow>>
248
249 Indicates what sort of overflow checking should be done when
250 performing a relocation.
251
252 CODE_FRAGMENT
253 .
254 .enum complain_overflow
255 .{
256 . {* Do not complain on overflow. *}
257 . complain_overflow_dont,
258 .
259 . {* Complain if the value overflows when considered as a signed
260 . number one bit larger than the field. ie. A bitfield of N bits
261 . is allowed to represent -2**n to 2**n-1. *}
262 . complain_overflow_bitfield,
263 .
264 . {* Complain if the value overflows when considered as a signed
265 . number. *}
266 . complain_overflow_signed,
267 .
268 . {* Complain if the value overflows when considered as an
269 . unsigned number. *}
270 . complain_overflow_unsigned
271 .};
272
273 */
274
275 /*
276 SUBSUBSECTION
277 <<reloc_howto_type>>
278
279 The <<reloc_howto_type>> is a structure which contains all the
280 information that libbfd needs to know to tie up a back end's data.
281
282 CODE_FRAGMENT
283 .struct reloc_howto_struct
284 .{
285 . {* The type field has mainly a documentary use - the back end can
286 . do what it wants with it, though normally the back end's idea of
287 . an external reloc number is stored in this field. *}
288 . unsigned int type;
289 .
290 . {* The encoded size of the item to be relocated. This is *not* a
291 . power-of-two measure. Use bfd_get_reloc_size to find the size
292 . of the item in bytes. *}
293 . unsigned int size:3;
294 .
295 . {* The number of bits in the field to be relocated. This is used
296 . when doing overflow checking. *}
297 . unsigned int bitsize:7;
298 .
299 . {* The value the final relocation is shifted right by. This drops
300 . unwanted data from the relocation. *}
301 . unsigned int rightshift:6;
302 .
303 . {* The bit position of the reloc value in the destination.
304 . The relocated value is left shifted by this amount. *}
305 . unsigned int bitpos:6;
306 .
307 . {* What type of overflow error should be checked for when
308 . relocating. *}
309 . ENUM_BITFIELD (complain_overflow) complain_on_overflow:2;
310 .
311 . {* The relocation value should be negated before applying. *}
312 . unsigned int negate:1;
313 .
314 . {* The relocation is relative to the item being relocated. *}
315 . unsigned int pc_relative:1;
316 .
317 . {* Some formats record a relocation addend in the section contents
318 . rather than with the relocation. For ELF formats this is the
319 . distinction between USE_REL and USE_RELA (though the code checks
320 . for USE_REL == 1/0). The value of this field is TRUE if the
321 . addend is recorded with the section contents; when performing a
322 . partial link (ld -r) the section contents (the data) will be
323 . modified. The value of this field is FALSE if addends are
324 . recorded with the relocation (in arelent.addend); when performing
325 . a partial link the relocation will be modified.
326 . All relocations for all ELF USE_RELA targets should set this field
327 . to FALSE (values of TRUE should be looked on with suspicion).
328 . However, the converse is not true: not all relocations of all ELF
329 . USE_REL targets set this field to TRUE. Why this is so is peculiar
330 . to each particular target. For relocs that aren't used in partial
331 . links (e.g. GOT stuff) it doesn't matter what this is set to. *}
332 . unsigned int partial_inplace:1;
333 .
334 . {* When some formats create PC relative instructions, they leave
335 . the value of the pc of the place being relocated in the offset
336 . slot of the instruction, so that a PC relative relocation can
337 . be made just by adding in an ordinary offset (e.g., sun3 a.out).
338 . Some formats leave the displacement part of an instruction
339 . empty (e.g., ELF); this flag signals the fact. *}
340 . unsigned int pcrel_offset:1;
341 .
342 . {* src_mask selects the part of the instruction (or data) to be used
343 . in the relocation sum. If the target relocations don't have an
344 . addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
345 . dst_mask to extract the addend from the section contents. If
346 . relocations do have an addend in the reloc, eg. ELF USE_RELA, this
347 . field should normally be zero. Non-zero values for ELF USE_RELA
348 . targets should be viewed with suspicion as normally the value in
349 . the dst_mask part of the section contents should be ignored. *}
350 . bfd_vma src_mask;
351 .
352 . {* dst_mask selects which parts of the instruction (or data) are
353 . replaced with a relocated value. *}
354 . bfd_vma dst_mask;
355 .
356 . {* If this field is non null, then the supplied function is
357 . called rather than the normal function. This allows really
358 . strange relocation methods to be accommodated. *}
359 . bfd_reloc_status_type (*special_function)
360 . (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
361 . bfd *, char **);
362 .
363 . {* The textual name of the relocation type. *}
364 . const char *name;
365 .};
366 .
367 */
368
369 /*
370 FUNCTION
371 The HOWTO Macro
372
373 DESCRIPTION
374 The HOWTO macro fills in a reloc_howto_type (a typedef for
375 const struct reloc_howto_struct).
376
377 .#define HOWTO(type, right, size, bits, pcrel, left, ovf, func, name, \
378 . inplace, src_mask, dst_mask, pcrel_off) \
379 . { (unsigned) type, size < 0 ? -size : size, bits, right, left, ovf, \
380 . size < 0, pcrel, inplace, pcrel_off, src_mask, dst_mask, func, name }
381
382 DESCRIPTION
383 This is used to fill in an empty howto entry in an array.
384
385 .#define EMPTY_HOWTO(C) \
386 . HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
387 . NULL, FALSE, 0, 0, FALSE)
388 .
389 */
390
391 /*
392 FUNCTION
393 bfd_get_reloc_size
394
395 SYNOPSIS
396 unsigned int bfd_get_reloc_size (reloc_howto_type *);
397
398 DESCRIPTION
399 For a reloc_howto_type that operates on a fixed number of bytes,
400 this returns the number of bytes operated on.
401 */
402
403 unsigned int
404 bfd_get_reloc_size (reloc_howto_type *howto)
405 {
406 switch (howto->size)
407 {
408 case 0: return 1;
409 case 1: return 2;
410 case 2: return 4;
411 case 3: return 0;
412 case 4: return 8;
413 case 5: return 3;
414 default: abort ();
415 }
416 }
417
418 /*
419 TYPEDEF
420 arelent_chain
421
422 DESCRIPTION
423
424 How relocs are tied together in an <<asection>>:
425
426 .typedef struct relent_chain
427 .{
428 . arelent relent;
429 . struct relent_chain *next;
430 .}
431 .arelent_chain;
432 .
433 */
434
435 /* N_ONES produces N one bits, without overflowing machine arithmetic. */
436 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
437
438 /*
439 FUNCTION
440 bfd_check_overflow
441
442 SYNOPSIS
443 bfd_reloc_status_type bfd_check_overflow
444 (enum complain_overflow how,
445 unsigned int bitsize,
446 unsigned int rightshift,
447 unsigned int addrsize,
448 bfd_vma relocation);
449
450 DESCRIPTION
451 Perform overflow checking on @var{relocation} which has
452 @var{bitsize} significant bits and will be shifted right by
453 @var{rightshift} bits, on a machine with addresses containing
454 @var{addrsize} significant bits. The result is either of
455 @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
456
457 */
458
459 bfd_reloc_status_type
460 bfd_check_overflow (enum complain_overflow how,
461 unsigned int bitsize,
462 unsigned int rightshift,
463 unsigned int addrsize,
464 bfd_vma relocation)
465 {
466 bfd_vma fieldmask, addrmask, signmask, ss, a;
467 bfd_reloc_status_type flag = bfd_reloc_ok;
468
469 /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
470 we'll be permissive: extra bits in the field mask will
471 automatically extend the address mask for purposes of the
472 overflow check. */
473 fieldmask = N_ONES (bitsize);
474 signmask = ~fieldmask;
475 addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
476 a = (relocation & addrmask) >> rightshift;
477
478 switch (how)
479 {
480 case complain_overflow_dont:
481 break;
482
483 case complain_overflow_signed:
484 /* If any sign bits are set, all sign bits must be set. That
485 is, A must be a valid negative address after shifting. */
486 signmask = ~ (fieldmask >> 1);
487 /* Fall thru */
488
489 case complain_overflow_bitfield:
490 /* Bitfields are sometimes signed, sometimes unsigned. We
491 explicitly allow an address wrap too, which means a bitfield
492 of n bits is allowed to store -2**n to 2**n-1. Thus overflow
493 if the value has some, but not all, bits set outside the
494 field. */
495 ss = a & signmask;
496 if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
497 flag = bfd_reloc_overflow;
498 break;
499
500 case complain_overflow_unsigned:
501 /* We have an overflow if the address does not fit in the field. */
502 if ((a & signmask) != 0)
503 flag = bfd_reloc_overflow;
504 break;
505
506 default:
507 abort ();
508 }
509
510 return flag;
511 }
512
513 /*
514 FUNCTION
515 bfd_reloc_offset_in_range
516
517 SYNOPSIS
518 bfd_boolean bfd_reloc_offset_in_range
519 (reloc_howto_type *howto,
520 bfd *abfd,
521 asection *section,
522 bfd_size_type offset);
523
524 DESCRIPTION
525 Returns TRUE if the reloc described by @var{HOWTO} can be
526 applied at @var{OFFSET} octets in @var{SECTION}.
527
528 */
529
530 /* HOWTO describes a relocation, at offset OCTET. Return whether the
531 relocation field is within SECTION of ABFD. */
532
533 bfd_boolean
534 bfd_reloc_offset_in_range (reloc_howto_type *howto,
535 bfd *abfd,
536 asection *section,
537 bfd_size_type octet)
538 {
539 bfd_size_type octet_end = bfd_get_section_limit_octets (abfd, section);
540 bfd_size_type reloc_size = bfd_get_reloc_size (howto);
541
542 /* The reloc field must be contained entirely within the section.
543 Allow zero length fields (marker relocs or NONE relocs where no
544 relocation will be performed) at the end of the section. */
545 return octet <= octet_end && octet + reloc_size <= octet_end;
546 }
547
548 /* Read and return the section contents at DATA converted to a host
549 integer (bfd_vma). The number of bytes read is given by the HOWTO. */
550
551 static bfd_vma
552 read_reloc (bfd *abfd, bfd_byte *data, reloc_howto_type *howto)
553 {
554 switch (howto->size)
555 {
556 case 0:
557 return bfd_get_8 (abfd, data);
558
559 case 1:
560 return bfd_get_16 (abfd, data);
561
562 case 2:
563 return bfd_get_32 (abfd, data);
564
565 case 3:
566 break;
567
568 #ifdef BFD64
569 case 4:
570 return bfd_get_64 (abfd, data);
571 #endif
572
573 case 5:
574 return bfd_get_24 (abfd, data);
575
576 default:
577 abort ();
578 }
579 return 0;
580 }
581
582 /* Convert VAL to target format and write to DATA. The number of
583 bytes written is given by the HOWTO. */
584
585 static void
586 write_reloc (bfd *abfd, bfd_vma val, bfd_byte *data, reloc_howto_type *howto)
587 {
588 switch (howto->size)
589 {
590 case 0:
591 bfd_put_8 (abfd, val, data);
592 break;
593
594 case 1:
595 bfd_put_16 (abfd, val, data);
596 break;
597
598 case 2:
599 bfd_put_32 (abfd, val, data);
600 break;
601
602 case 3:
603 break;
604
605 #ifdef BFD64
606 case 4:
607 bfd_put_64 (abfd, val, data);
608 break;
609 #endif
610
611 case 5:
612 bfd_put_24 (abfd, val, data);
613 break;
614
615 default:
616 abort ();
617 }
618 }
619
620 /* Apply RELOCATION value to target bytes at DATA, according to
621 HOWTO. */
622
623 static void
624 apply_reloc (bfd *abfd, bfd_byte *data, reloc_howto_type *howto,
625 bfd_vma relocation)
626 {
627 bfd_vma val = read_reloc (abfd, data, howto);
628
629 if (howto->negate)
630 relocation = -relocation;
631
632 val = ((val & ~howto->dst_mask)
633 | (((val & howto->src_mask) + relocation) & howto->dst_mask));
634
635 write_reloc (abfd, val, data, howto);
636 }
637
638 /*
639 FUNCTION
640 bfd_perform_relocation
641
642 SYNOPSIS
643 bfd_reloc_status_type bfd_perform_relocation
644 (bfd *abfd,
645 arelent *reloc_entry,
646 void *data,
647 asection *input_section,
648 bfd *output_bfd,
649 char **error_message);
650
651 DESCRIPTION
652 If @var{output_bfd} is supplied to this function, the
653 generated image will be relocatable; the relocations are
654 copied to the output file after they have been changed to
655 reflect the new state of the world. There are two ways of
656 reflecting the results of partial linkage in an output file:
657 by modifying the output data in place, and by modifying the
658 relocation record. Some native formats (e.g., basic a.out and
659 basic coff) have no way of specifying an addend in the
660 relocation type, so the addend has to go in the output data.
661 This is no big deal since in these formats the output data
662 slot will always be big enough for the addend. Complex reloc
663 types with addends were invented to solve just this problem.
664 The @var{error_message} argument is set to an error message if
665 this return @code{bfd_reloc_dangerous}.
666
667 */
668
669 bfd_reloc_status_type
670 bfd_perform_relocation (bfd *abfd,
671 arelent *reloc_entry,
672 void *data,
673 asection *input_section,
674 bfd *output_bfd,
675 char **error_message)
676 {
677 bfd_vma relocation;
678 bfd_reloc_status_type flag = bfd_reloc_ok;
679 bfd_size_type octets;
680 bfd_vma output_base = 0;
681 reloc_howto_type *howto = reloc_entry->howto;
682 asection *reloc_target_output_section;
683 asymbol *symbol;
684
685 symbol = *(reloc_entry->sym_ptr_ptr);
686
687 /* If we are not producing relocatable output, return an error if
688 the symbol is not defined. An undefined weak symbol is
689 considered to have a value of zero (SVR4 ABI, p. 4-27). */
690 if (bfd_is_und_section (symbol->section)
691 && (symbol->flags & BSF_WEAK) == 0
692 && output_bfd == NULL)
693 flag = bfd_reloc_undefined;
694
695 /* If there is a function supplied to handle this relocation type,
696 call it. It'll return `bfd_reloc_continue' if further processing
697 can be done. */
698 if (howto && howto->special_function)
699 {
700 bfd_reloc_status_type cont;
701
702 /* Note - we do not call bfd_reloc_offset_in_range here as the
703 reloc_entry->address field might actually be valid for the
704 backend concerned. It is up to the special_function itself
705 to call bfd_reloc_offset_in_range if needed. */
706 cont = howto->special_function (abfd, reloc_entry, symbol, data,
707 input_section, output_bfd,
708 error_message);
709 if (cont != bfd_reloc_continue)
710 return cont;
711 }
712
713 if (bfd_is_abs_section (symbol->section)
714 && output_bfd != NULL)
715 {
716 reloc_entry->address += input_section->output_offset;
717 return bfd_reloc_ok;
718 }
719
720 /* PR 17512: file: 0f67f69d. */
721 if (howto == NULL)
722 return bfd_reloc_undefined;
723
724 /* Is the address of the relocation really within the section? */
725 octets = reloc_entry->address * bfd_octets_per_byte (abfd);
726 if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
727 return bfd_reloc_outofrange;
728
729 /* Work out which section the relocation is targeted at and the
730 initial relocation command value. */
731
732 /* Get symbol value. (Common symbols are special.) */
733 if (bfd_is_com_section (symbol->section))
734 relocation = 0;
735 else
736 relocation = symbol->value;
737
738 reloc_target_output_section = symbol->section->output_section;
739
740 /* Convert input-section-relative symbol value to absolute. */
741 if ((output_bfd && ! howto->partial_inplace)
742 || reloc_target_output_section == NULL)
743 output_base = 0;
744 else
745 output_base = reloc_target_output_section->vma;
746
747 relocation += output_base + symbol->section->output_offset;
748
749 /* Add in supplied addend. */
750 relocation += reloc_entry->addend;
751
752 /* Here the variable relocation holds the final address of the
753 symbol we are relocating against, plus any addend. */
754
755 if (howto->pc_relative)
756 {
757 /* This is a PC relative relocation. We want to set RELOCATION
758 to the distance between the address of the symbol and the
759 location. RELOCATION is already the address of the symbol.
760
761 We start by subtracting the address of the section containing
762 the location.
763
764 If pcrel_offset is set, we must further subtract the position
765 of the location within the section. Some targets arrange for
766 the addend to be the negative of the position of the location
767 within the section; for example, i386-aout does this. For
768 i386-aout, pcrel_offset is FALSE. Some other targets do not
769 include the position of the location; for example, ELF.
770 For those targets, pcrel_offset is TRUE.
771
772 If we are producing relocatable output, then we must ensure
773 that this reloc will be correctly computed when the final
774 relocation is done. If pcrel_offset is FALSE we want to wind
775 up with the negative of the location within the section,
776 which means we must adjust the existing addend by the change
777 in the location within the section. If pcrel_offset is TRUE
778 we do not want to adjust the existing addend at all.
779
780 FIXME: This seems logical to me, but for the case of
781 producing relocatable output it is not what the code
782 actually does. I don't want to change it, because it seems
783 far too likely that something will break. */
784
785 relocation -=
786 input_section->output_section->vma + input_section->output_offset;
787
788 if (howto->pcrel_offset)
789 relocation -= reloc_entry->address;
790 }
791
792 if (output_bfd != NULL)
793 {
794 if (! howto->partial_inplace)
795 {
796 /* This is a partial relocation, and we want to apply the relocation
797 to the reloc entry rather than the raw data. Modify the reloc
798 inplace to reflect what we now know. */
799 reloc_entry->addend = relocation;
800 reloc_entry->address += input_section->output_offset;
801 return flag;
802 }
803 else
804 {
805 /* This is a partial relocation, but inplace, so modify the
806 reloc record a bit.
807
808 If we've relocated with a symbol with a section, change
809 into a ref to the section belonging to the symbol. */
810
811 reloc_entry->address += input_section->output_offset;
812
813 /* WTF?? */
814 if (abfd->xvec->flavour == bfd_target_coff_flavour
815 && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
816 && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
817 {
818 /* For m68k-coff, the addend was being subtracted twice during
819 relocation with -r. Removing the line below this comment
820 fixes that problem; see PR 2953.
821
822 However, Ian wrote the following, regarding removing the line below,
823 which explains why it is still enabled: --djm
824
825 If you put a patch like that into BFD you need to check all the COFF
826 linkers. I am fairly certain that patch will break coff-i386 (e.g.,
827 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
828 problem in a different way. There may very well be a reason that the
829 code works as it does.
830
831 Hmmm. The first obvious point is that bfd_perform_relocation should
832 not have any tests that depend upon the flavour. It's seem like
833 entirely the wrong place for such a thing. The second obvious point
834 is that the current code ignores the reloc addend when producing
835 relocatable output for COFF. That's peculiar. In fact, I really
836 have no idea what the point of the line you want to remove is.
837
838 A typical COFF reloc subtracts the old value of the symbol and adds in
839 the new value to the location in the object file (if it's a pc
840 relative reloc it adds the difference between the symbol value and the
841 location). When relocating we need to preserve that property.
842
843 BFD handles this by setting the addend to the negative of the old
844 value of the symbol. Unfortunately it handles common symbols in a
845 non-standard way (it doesn't subtract the old value) but that's a
846 different story (we can't change it without losing backward
847 compatibility with old object files) (coff-i386 does subtract the old
848 value, to be compatible with existing coff-i386 targets, like SCO).
849
850 So everything works fine when not producing relocatable output. When
851 we are producing relocatable output, logically we should do exactly
852 what we do when not producing relocatable output. Therefore, your
853 patch is correct. In fact, it should probably always just set
854 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
855 add the value into the object file. This won't hurt the COFF code,
856 which doesn't use the addend; I'm not sure what it will do to other
857 formats (the thing to check for would be whether any formats both use
858 the addend and set partial_inplace).
859
860 When I wanted to make coff-i386 produce relocatable output, I ran
861 into the problem that you are running into: I wanted to remove that
862 line. Rather than risk it, I made the coff-i386 relocs use a special
863 function; it's coff_i386_reloc in coff-i386.c. The function
864 specifically adds the addend field into the object file, knowing that
865 bfd_perform_relocation is not going to. If you remove that line, then
866 coff-i386.c will wind up adding the addend field in twice. It's
867 trivial to fix; it just needs to be done.
868
869 The problem with removing the line is just that it may break some
870 working code. With BFD it's hard to be sure of anything. The right
871 way to deal with this is simply to build and test at least all the
872 supported COFF targets. It should be straightforward if time and disk
873 space consuming. For each target:
874 1) build the linker
875 2) generate some executable, and link it using -r (I would
876 probably use paranoia.o and link against newlib/libc.a, which
877 for all the supported targets would be available in
878 /usr/cygnus/progressive/H-host/target/lib/libc.a).
879 3) make the change to reloc.c
880 4) rebuild the linker
881 5) repeat step 2
882 6) if the resulting object files are the same, you have at least
883 made it no worse
884 7) if they are different you have to figure out which version is
885 right
886 */
887 relocation -= reloc_entry->addend;
888 reloc_entry->addend = 0;
889 }
890 else
891 {
892 reloc_entry->addend = relocation;
893 }
894 }
895 }
896
897 /* FIXME: This overflow checking is incomplete, because the value
898 might have overflowed before we get here. For a correct check we
899 need to compute the value in a size larger than bitsize, but we
900 can't reasonably do that for a reloc the same size as a host
901 machine word.
902 FIXME: We should also do overflow checking on the result after
903 adding in the value contained in the object file. */
904 if (howto->complain_on_overflow != complain_overflow_dont
905 && flag == bfd_reloc_ok)
906 flag = bfd_check_overflow (howto->complain_on_overflow,
907 howto->bitsize,
908 howto->rightshift,
909 bfd_arch_bits_per_address (abfd),
910 relocation);
911
912 /* Either we are relocating all the way, or we don't want to apply
913 the relocation to the reloc entry (probably because there isn't
914 any room in the output format to describe addends to relocs). */
915
916 /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
917 (OSF version 1.3, compiler version 3.11). It miscompiles the
918 following program:
919
920 struct str
921 {
922 unsigned int i0;
923 } s = { 0 };
924
925 int
926 main ()
927 {
928 unsigned long x;
929
930 x = 0x100000000;
931 x <<= (unsigned long) s.i0;
932 if (x == 0)
933 printf ("failed\n");
934 else
935 printf ("succeeded (%lx)\n", x);
936 }
937 */
938
939 relocation >>= (bfd_vma) howto->rightshift;
940
941 /* Shift everything up to where it's going to be used. */
942 relocation <<= (bfd_vma) howto->bitpos;
943
944 /* Wait for the day when all have the mask in them. */
945
946 /* What we do:
947 i instruction to be left alone
948 o offset within instruction
949 r relocation offset to apply
950 S src mask
951 D dst mask
952 N ~dst mask
953 A part 1
954 B part 2
955 R result
956
957 Do this:
958 (( i i i i i o o o o o from bfd_get<size>
959 and S S S S S) to get the size offset we want
960 + r r r r r r r r r r) to get the final value to place
961 and D D D D D to chop to right size
962 -----------------------
963 = A A A A A
964 And this:
965 ( i i i i i o o o o o from bfd_get<size>
966 and N N N N N ) get instruction
967 -----------------------
968 = B B B B B
969
970 And then:
971 ( B B B B B
972 or A A A A A)
973 -----------------------
974 = R R R R R R R R R R put into bfd_put<size>
975 */
976
977 data = (bfd_byte *) data + octets;
978 apply_reloc (abfd, data, howto, relocation);
979 return flag;
980 }
981
982 /*
983 FUNCTION
984 bfd_install_relocation
985
986 SYNOPSIS
987 bfd_reloc_status_type bfd_install_relocation
988 (bfd *abfd,
989 arelent *reloc_entry,
990 void *data, bfd_vma data_start,
991 asection *input_section,
992 char **error_message);
993
994 DESCRIPTION
995 This looks remarkably like <<bfd_perform_relocation>>, except it
996 does not expect that the section contents have been filled in.
997 I.e., it's suitable for use when creating, rather than applying
998 a relocation.
999
1000 For now, this function should be considered reserved for the
1001 assembler.
1002 */
1003
1004 bfd_reloc_status_type
1005 bfd_install_relocation (bfd *abfd,
1006 arelent *reloc_entry,
1007 void *data_start,
1008 bfd_vma data_start_offset,
1009 asection *input_section,
1010 char **error_message)
1011 {
1012 bfd_vma relocation;
1013 bfd_reloc_status_type flag = bfd_reloc_ok;
1014 bfd_size_type octets;
1015 bfd_vma output_base = 0;
1016 reloc_howto_type *howto = reloc_entry->howto;
1017 asection *reloc_target_output_section;
1018 asymbol *symbol;
1019 bfd_byte *data;
1020
1021 symbol = *(reloc_entry->sym_ptr_ptr);
1022
1023 /* If there is a function supplied to handle this relocation type,
1024 call it. It'll return `bfd_reloc_continue' if further processing
1025 can be done. */
1026 if (howto && howto->special_function)
1027 {
1028 bfd_reloc_status_type cont;
1029
1030 /* Note - we do not call bfd_reloc_offset_in_range here as the
1031 reloc_entry->address field might actually be valid for the
1032 backend concerned. It is up to the special_function itself
1033 to call bfd_reloc_offset_in_range if needed. */
1034 /* XXX - The special_function calls haven't been fixed up to deal
1035 with creating new relocations and section contents. */
1036 cont = howto->special_function (abfd, reloc_entry, symbol,
1037 /* XXX - Non-portable! */
1038 ((bfd_byte *) data_start
1039 - data_start_offset),
1040 input_section, abfd, error_message);
1041 if (cont != bfd_reloc_continue)
1042 return cont;
1043 }
1044
1045 if (bfd_is_abs_section (symbol->section))
1046 {
1047 reloc_entry->address += input_section->output_offset;
1048 return bfd_reloc_ok;
1049 }
1050
1051 /* No need to check for howto != NULL if !bfd_is_abs_section as
1052 it will have been checked in `bfd_perform_relocation already'. */
1053
1054 /* Is the address of the relocation really within the section? */
1055 octets = reloc_entry->address * bfd_octets_per_byte (abfd);
1056 if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
1057 return bfd_reloc_outofrange;
1058
1059 /* Work out which section the relocation is targeted at and the
1060 initial relocation command value. */
1061
1062 /* Get symbol value. (Common symbols are special.) */
1063 if (bfd_is_com_section (symbol->section))
1064 relocation = 0;
1065 else
1066 relocation = symbol->value;
1067
1068 reloc_target_output_section = symbol->section->output_section;
1069
1070 /* Convert input-section-relative symbol value to absolute. */
1071 if (! howto->partial_inplace)
1072 output_base = 0;
1073 else
1074 output_base = reloc_target_output_section->vma;
1075
1076 relocation += output_base + symbol->section->output_offset;
1077
1078 /* Add in supplied addend. */
1079 relocation += reloc_entry->addend;
1080
1081 /* Here the variable relocation holds the final address of the
1082 symbol we are relocating against, plus any addend. */
1083
1084 if (howto->pc_relative)
1085 {
1086 /* This is a PC relative relocation. We want to set RELOCATION
1087 to the distance between the address of the symbol and the
1088 location. RELOCATION is already the address of the symbol.
1089
1090 We start by subtracting the address of the section containing
1091 the location.
1092
1093 If pcrel_offset is set, we must further subtract the position
1094 of the location within the section. Some targets arrange for
1095 the addend to be the negative of the position of the location
1096 within the section; for example, i386-aout does this. For
1097 i386-aout, pcrel_offset is FALSE. Some other targets do not
1098 include the position of the location; for example, ELF.
1099 For those targets, pcrel_offset is TRUE.
1100
1101 If we are producing relocatable output, then we must ensure
1102 that this reloc will be correctly computed when the final
1103 relocation is done. If pcrel_offset is FALSE we want to wind
1104 up with the negative of the location within the section,
1105 which means we must adjust the existing addend by the change
1106 in the location within the section. If pcrel_offset is TRUE
1107 we do not want to adjust the existing addend at all.
1108
1109 FIXME: This seems logical to me, but for the case of
1110 producing relocatable output it is not what the code
1111 actually does. I don't want to change it, because it seems
1112 far too likely that something will break. */
1113
1114 relocation -=
1115 input_section->output_section->vma + input_section->output_offset;
1116
1117 if (howto->pcrel_offset && howto->partial_inplace)
1118 relocation -= reloc_entry->address;
1119 }
1120
1121 if (! howto->partial_inplace)
1122 {
1123 /* This is a partial relocation, and we want to apply the relocation
1124 to the reloc entry rather than the raw data. Modify the reloc
1125 inplace to reflect what we now know. */
1126 reloc_entry->addend = relocation;
1127 reloc_entry->address += input_section->output_offset;
1128 return flag;
1129 }
1130 else
1131 {
1132 /* This is a partial relocation, but inplace, so modify the
1133 reloc record a bit.
1134
1135 If we've relocated with a symbol with a section, change
1136 into a ref to the section belonging to the symbol. */
1137 reloc_entry->address += input_section->output_offset;
1138
1139 /* WTF?? */
1140 if (abfd->xvec->flavour == bfd_target_coff_flavour
1141 && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1142 && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1143 {
1144
1145 /* For m68k-coff, the addend was being subtracted twice during
1146 relocation with -r. Removing the line below this comment
1147 fixes that problem; see PR 2953.
1148
1149 However, Ian wrote the following, regarding removing the line below,
1150 which explains why it is still enabled: --djm
1151
1152 If you put a patch like that into BFD you need to check all the COFF
1153 linkers. I am fairly certain that patch will break coff-i386 (e.g.,
1154 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1155 problem in a different way. There may very well be a reason that the
1156 code works as it does.
1157
1158 Hmmm. The first obvious point is that bfd_install_relocation should
1159 not have any tests that depend upon the flavour. It's seem like
1160 entirely the wrong place for such a thing. The second obvious point
1161 is that the current code ignores the reloc addend when producing
1162 relocatable output for COFF. That's peculiar. In fact, I really
1163 have no idea what the point of the line you want to remove is.
1164
1165 A typical COFF reloc subtracts the old value of the symbol and adds in
1166 the new value to the location in the object file (if it's a pc
1167 relative reloc it adds the difference between the symbol value and the
1168 location). When relocating we need to preserve that property.
1169
1170 BFD handles this by setting the addend to the negative of the old
1171 value of the symbol. Unfortunately it handles common symbols in a
1172 non-standard way (it doesn't subtract the old value) but that's a
1173 different story (we can't change it without losing backward
1174 compatibility with old object files) (coff-i386 does subtract the old
1175 value, to be compatible with existing coff-i386 targets, like SCO).
1176
1177 So everything works fine when not producing relocatable output. When
1178 we are producing relocatable output, logically we should do exactly
1179 what we do when not producing relocatable output. Therefore, your
1180 patch is correct. In fact, it should probably always just set
1181 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1182 add the value into the object file. This won't hurt the COFF code,
1183 which doesn't use the addend; I'm not sure what it will do to other
1184 formats (the thing to check for would be whether any formats both use
1185 the addend and set partial_inplace).
1186
1187 When I wanted to make coff-i386 produce relocatable output, I ran
1188 into the problem that you are running into: I wanted to remove that
1189 line. Rather than risk it, I made the coff-i386 relocs use a special
1190 function; it's coff_i386_reloc in coff-i386.c. The function
1191 specifically adds the addend field into the object file, knowing that
1192 bfd_install_relocation is not going to. If you remove that line, then
1193 coff-i386.c will wind up adding the addend field in twice. It's
1194 trivial to fix; it just needs to be done.
1195
1196 The problem with removing the line is just that it may break some
1197 working code. With BFD it's hard to be sure of anything. The right
1198 way to deal with this is simply to build and test at least all the
1199 supported COFF targets. It should be straightforward if time and disk
1200 space consuming. For each target:
1201 1) build the linker
1202 2) generate some executable, and link it using -r (I would
1203 probably use paranoia.o and link against newlib/libc.a, which
1204 for all the supported targets would be available in
1205 /usr/cygnus/progressive/H-host/target/lib/libc.a).
1206 3) make the change to reloc.c
1207 4) rebuild the linker
1208 5) repeat step 2
1209 6) if the resulting object files are the same, you have at least
1210 made it no worse
1211 7) if they are different you have to figure out which version is
1212 right. */
1213 relocation -= reloc_entry->addend;
1214 /* FIXME: There should be no target specific code here... */
1215 if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1216 reloc_entry->addend = 0;
1217 }
1218 else
1219 {
1220 reloc_entry->addend = relocation;
1221 }
1222 }
1223
1224 /* FIXME: This overflow checking is incomplete, because the value
1225 might have overflowed before we get here. For a correct check we
1226 need to compute the value in a size larger than bitsize, but we
1227 can't reasonably do that for a reloc the same size as a host
1228 machine word.
1229 FIXME: We should also do overflow checking on the result after
1230 adding in the value contained in the object file. */
1231 if (howto->complain_on_overflow != complain_overflow_dont)
1232 flag = bfd_check_overflow (howto->complain_on_overflow,
1233 howto->bitsize,
1234 howto->rightshift,
1235 bfd_arch_bits_per_address (abfd),
1236 relocation);
1237
1238 /* Either we are relocating all the way, or we don't want to apply
1239 the relocation to the reloc entry (probably because there isn't
1240 any room in the output format to describe addends to relocs). */
1241
1242 /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1243 (OSF version 1.3, compiler version 3.11). It miscompiles the
1244 following program:
1245
1246 struct str
1247 {
1248 unsigned int i0;
1249 } s = { 0 };
1250
1251 int
1252 main ()
1253 {
1254 unsigned long x;
1255
1256 x = 0x100000000;
1257 x <<= (unsigned long) s.i0;
1258 if (x == 0)
1259 printf ("failed\n");
1260 else
1261 printf ("succeeded (%lx)\n", x);
1262 }
1263 */
1264
1265 relocation >>= (bfd_vma) howto->rightshift;
1266
1267 /* Shift everything up to where it's going to be used. */
1268 relocation <<= (bfd_vma) howto->bitpos;
1269
1270 /* Wait for the day when all have the mask in them. */
1271
1272 /* What we do:
1273 i instruction to be left alone
1274 o offset within instruction
1275 r relocation offset to apply
1276 S src mask
1277 D dst mask
1278 N ~dst mask
1279 A part 1
1280 B part 2
1281 R result
1282
1283 Do this:
1284 (( i i i i i o o o o o from bfd_get<size>
1285 and S S S S S) to get the size offset we want
1286 + r r r r r r r r r r) to get the final value to place
1287 and D D D D D to chop to right size
1288 -----------------------
1289 = A A A A A
1290 And this:
1291 ( i i i i i o o o o o from bfd_get<size>
1292 and N N N N N ) get instruction
1293 -----------------------
1294 = B B B B B
1295
1296 And then:
1297 ( B B B B B
1298 or A A A A A)
1299 -----------------------
1300 = R R R R R R R R R R put into bfd_put<size>
1301 */
1302
1303 data = (bfd_byte *) data_start + (octets - data_start_offset);
1304 apply_reloc (abfd, data, howto, relocation);
1305 return flag;
1306 }
1307
1308 /* This relocation routine is used by some of the backend linkers.
1309 They do not construct asymbol or arelent structures, so there is no
1310 reason for them to use bfd_perform_relocation. Also,
1311 bfd_perform_relocation is so hacked up it is easier to write a new
1312 function than to try to deal with it.
1313
1314 This routine does a final relocation. Whether it is useful for a
1315 relocatable link depends upon how the object format defines
1316 relocations.
1317
1318 FIXME: This routine ignores any special_function in the HOWTO,
1319 since the existing special_function values have been written for
1320 bfd_perform_relocation.
1321
1322 HOWTO is the reloc howto information.
1323 INPUT_BFD is the BFD which the reloc applies to.
1324 INPUT_SECTION is the section which the reloc applies to.
1325 CONTENTS is the contents of the section.
1326 ADDRESS is the address of the reloc within INPUT_SECTION.
1327 VALUE is the value of the symbol the reloc refers to.
1328 ADDEND is the addend of the reloc. */
1329
1330 bfd_reloc_status_type
1331 _bfd_final_link_relocate (reloc_howto_type *howto,
1332 bfd *input_bfd,
1333 asection *input_section,
1334 bfd_byte *contents,
1335 bfd_vma address,
1336 bfd_vma value,
1337 bfd_vma addend)
1338 {
1339 bfd_vma relocation;
1340 bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
1341
1342 /* Sanity check the address. */
1343 if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, octets))
1344 return bfd_reloc_outofrange;
1345
1346 /* This function assumes that we are dealing with a basic relocation
1347 against a symbol. We want to compute the value of the symbol to
1348 relocate to. This is just VALUE, the value of the symbol, plus
1349 ADDEND, any addend associated with the reloc. */
1350 relocation = value + addend;
1351
1352 /* If the relocation is PC relative, we want to set RELOCATION to
1353 the distance between the symbol (currently in RELOCATION) and the
1354 location we are relocating. Some targets (e.g., i386-aout)
1355 arrange for the contents of the section to be the negative of the
1356 offset of the location within the section; for such targets
1357 pcrel_offset is FALSE. Other targets (e.g., ELF) simply leave
1358 the contents of the section as zero; for such targets
1359 pcrel_offset is TRUE. If pcrel_offset is FALSE we do not need to
1360 subtract out the offset of the location within the section (which
1361 is just ADDRESS). */
1362 if (howto->pc_relative)
1363 {
1364 relocation -= (input_section->output_section->vma
1365 + input_section->output_offset);
1366 if (howto->pcrel_offset)
1367 relocation -= address;
1368 }
1369
1370 return _bfd_relocate_contents (howto, input_bfd, relocation,
1371 contents
1372 + address * bfd_octets_per_byte (input_bfd));
1373 }
1374
1375 /* Relocate a given location using a given value and howto. */
1376
1377 bfd_reloc_status_type
1378 _bfd_relocate_contents (reloc_howto_type *howto,
1379 bfd *input_bfd,
1380 bfd_vma relocation,
1381 bfd_byte *location)
1382 {
1383 bfd_vma x;
1384 bfd_reloc_status_type flag;
1385 unsigned int rightshift = howto->rightshift;
1386 unsigned int bitpos = howto->bitpos;
1387
1388 if (howto->negate)
1389 relocation = -relocation;
1390
1391 /* Get the value we are going to relocate. */
1392 x = read_reloc (input_bfd, location, howto);
1393
1394 /* Check for overflow. FIXME: We may drop bits during the addition
1395 which we don't check for. We must either check at every single
1396 operation, which would be tedious, or we must do the computations
1397 in a type larger than bfd_vma, which would be inefficient. */
1398 flag = bfd_reloc_ok;
1399 if (howto->complain_on_overflow != complain_overflow_dont)
1400 {
1401 bfd_vma addrmask, fieldmask, signmask, ss;
1402 bfd_vma a, b, sum;
1403
1404 /* Get the values to be added together. For signed and unsigned
1405 relocations, we assume that all values should be truncated to
1406 the size of an address. For bitfields, all the bits matter.
1407 See also bfd_check_overflow. */
1408 fieldmask = N_ONES (howto->bitsize);
1409 signmask = ~fieldmask;
1410 addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1411 | (fieldmask << rightshift));
1412 a = (relocation & addrmask) >> rightshift;
1413 b = (x & howto->src_mask & addrmask) >> bitpos;
1414 addrmask >>= rightshift;
1415
1416 switch (howto->complain_on_overflow)
1417 {
1418 case complain_overflow_signed:
1419 /* If any sign bits are set, all sign bits must be set.
1420 That is, A must be a valid negative address after
1421 shifting. */
1422 signmask = ~(fieldmask >> 1);
1423 /* Fall thru */
1424
1425 case complain_overflow_bitfield:
1426 /* Much like the signed check, but for a field one bit
1427 wider. We allow a bitfield to represent numbers in the
1428 range -2**n to 2**n-1, where n is the number of bits in the
1429 field. Note that when bfd_vma is 32 bits, a 32-bit reloc
1430 can't overflow, which is exactly what we want. */
1431 ss = a & signmask;
1432 if (ss != 0 && ss != (addrmask & signmask))
1433 flag = bfd_reloc_overflow;
1434
1435 /* We only need this next bit of code if the sign bit of B
1436 is below the sign bit of A. This would only happen if
1437 SRC_MASK had fewer bits than BITSIZE. Note that if
1438 SRC_MASK has more bits than BITSIZE, we can get into
1439 trouble; we would need to verify that B is in range, as
1440 we do for A above. */
1441 ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1442 ss >>= bitpos;
1443
1444 /* Set all the bits above the sign bit. */
1445 b = (b ^ ss) - ss;
1446
1447 /* Now we can do the addition. */
1448 sum = a + b;
1449
1450 /* See if the result has the correct sign. Bits above the
1451 sign bit are junk now; ignore them. If the sum is
1452 positive, make sure we did not have all negative inputs;
1453 if the sum is negative, make sure we did not have all
1454 positive inputs. The test below looks only at the sign
1455 bits, and it really just
1456 SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1457
1458 We mask with addrmask here to explicitly allow an address
1459 wrap-around. The Linux kernel relies on it, and it is
1460 the only way to write assembler code which can run when
1461 loaded at a location 0x80000000 away from the location at
1462 which it is linked. */
1463 if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1464 flag = bfd_reloc_overflow;
1465 break;
1466
1467 case complain_overflow_unsigned:
1468 /* Checking for an unsigned overflow is relatively easy:
1469 trim the addresses and add, and trim the result as well.
1470 Overflow is normally indicated when the result does not
1471 fit in the field. However, we also need to consider the
1472 case when, e.g., fieldmask is 0x7fffffff or smaller, an
1473 input is 0x80000000, and bfd_vma is only 32 bits; then we
1474 will get sum == 0, but there is an overflow, since the
1475 inputs did not fit in the field. Instead of doing a
1476 separate test, we can check for this by or-ing in the
1477 operands when testing for the sum overflowing its final
1478 field. */
1479 sum = (a + b) & addrmask;
1480 if ((a | b | sum) & signmask)
1481 flag = bfd_reloc_overflow;
1482 break;
1483
1484 default:
1485 abort ();
1486 }
1487 }
1488
1489 /* Put RELOCATION in the right bits. */
1490 relocation >>= (bfd_vma) rightshift;
1491 relocation <<= (bfd_vma) bitpos;
1492
1493 /* Add RELOCATION to the right bits of X. */
1494 x = ((x & ~howto->dst_mask)
1495 | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1496
1497 /* Put the relocated value back in the object file. */
1498 write_reloc (input_bfd, x, location, howto);
1499 return flag;
1500 }
1501
1502 /* Clear a given location using a given howto, by applying a fixed relocation
1503 value and discarding any in-place addend. This is used for fixed-up
1504 relocations against discarded symbols, to make ignorable debug or unwind
1505 information more obvious. */
1506
1507 bfd_reloc_status_type
1508 _bfd_clear_contents (reloc_howto_type *howto,
1509 bfd *input_bfd,
1510 asection *input_section,
1511 bfd_byte *buf,
1512 bfd_vma off)
1513 {
1514 bfd_vma x;
1515 bfd_byte *location;
1516
1517 if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, off))
1518 return bfd_reloc_outofrange;
1519
1520 /* Get the value we are going to relocate. */
1521 location = buf + off;
1522 x = read_reloc (input_bfd, location, howto);
1523
1524 /* Zero out the unwanted bits of X. */
1525 x &= ~howto->dst_mask;
1526
1527 /* For a range list, use 1 instead of 0 as placeholder. 0
1528 would terminate the list, hiding any later entries. */
1529 if (strcmp (bfd_get_section_name (input_bfd, input_section),
1530 ".debug_ranges") == 0
1531 && (howto->dst_mask & 1) != 0)
1532 x |= 1;
1533
1534 /* Put the relocated value back in the object file. */
1535 write_reloc (input_bfd, x, location, howto);
1536 return bfd_reloc_ok;
1537 }
1538
1539 /*
1540 DOCDD
1541 INODE
1542 howto manager, , typedef arelent, Relocations
1543
1544 SUBSECTION
1545 The howto manager
1546
1547 When an application wants to create a relocation, but doesn't
1548 know what the target machine might call it, it can find out by
1549 using this bit of code.
1550
1551 */
1552
1553 /*
1554 TYPEDEF
1555 bfd_reloc_code_type
1556
1557 DESCRIPTION
1558 The insides of a reloc code. The idea is that, eventually, there
1559 will be one enumerator for every type of relocation we ever do.
1560 Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1561 return a howto pointer.
1562
1563 This does mean that the application must determine the correct
1564 enumerator value; you can't get a howto pointer from a random set
1565 of attributes.
1566
1567 SENUM
1568 bfd_reloc_code_real
1569
1570 ENUM
1571 BFD_RELOC_64
1572 ENUMX
1573 BFD_RELOC_32
1574 ENUMX
1575 BFD_RELOC_26
1576 ENUMX
1577 BFD_RELOC_24
1578 ENUMX
1579 BFD_RELOC_16
1580 ENUMX
1581 BFD_RELOC_14
1582 ENUMX
1583 BFD_RELOC_8
1584 ENUMDOC
1585 Basic absolute relocations of N bits.
1586
1587 ENUM
1588 BFD_RELOC_64_PCREL
1589 ENUMX
1590 BFD_RELOC_32_PCREL
1591 ENUMX
1592 BFD_RELOC_24_PCREL
1593 ENUMX
1594 BFD_RELOC_16_PCREL
1595 ENUMX
1596 BFD_RELOC_12_PCREL
1597 ENUMX
1598 BFD_RELOC_8_PCREL
1599 ENUMDOC
1600 PC-relative relocations. Sometimes these are relative to the address
1601 of the relocation itself; sometimes they are relative to the start of
1602 the section containing the relocation. It depends on the specific target.
1603
1604 ENUM
1605 BFD_RELOC_32_SECREL
1606 ENUMDOC
1607 Section relative relocations. Some targets need this for DWARF2.
1608
1609 ENUM
1610 BFD_RELOC_32_GOT_PCREL
1611 ENUMX
1612 BFD_RELOC_16_GOT_PCREL
1613 ENUMX
1614 BFD_RELOC_8_GOT_PCREL
1615 ENUMX
1616 BFD_RELOC_32_GOTOFF
1617 ENUMX
1618 BFD_RELOC_16_GOTOFF
1619 ENUMX
1620 BFD_RELOC_LO16_GOTOFF
1621 ENUMX
1622 BFD_RELOC_HI16_GOTOFF
1623 ENUMX
1624 BFD_RELOC_HI16_S_GOTOFF
1625 ENUMX
1626 BFD_RELOC_8_GOTOFF
1627 ENUMX
1628 BFD_RELOC_64_PLT_PCREL
1629 ENUMX
1630 BFD_RELOC_32_PLT_PCREL
1631 ENUMX
1632 BFD_RELOC_24_PLT_PCREL
1633 ENUMX
1634 BFD_RELOC_16_PLT_PCREL
1635 ENUMX
1636 BFD_RELOC_8_PLT_PCREL
1637 ENUMX
1638 BFD_RELOC_64_PLTOFF
1639 ENUMX
1640 BFD_RELOC_32_PLTOFF
1641 ENUMX
1642 BFD_RELOC_16_PLTOFF
1643 ENUMX
1644 BFD_RELOC_LO16_PLTOFF
1645 ENUMX
1646 BFD_RELOC_HI16_PLTOFF
1647 ENUMX
1648 BFD_RELOC_HI16_S_PLTOFF
1649 ENUMX
1650 BFD_RELOC_8_PLTOFF
1651 ENUMDOC
1652 For ELF.
1653
1654 ENUM
1655 BFD_RELOC_SIZE32
1656 ENUMX
1657 BFD_RELOC_SIZE64
1658 ENUMDOC
1659 Size relocations.
1660
1661 ENUM
1662 BFD_RELOC_68K_GLOB_DAT
1663 ENUMX
1664 BFD_RELOC_68K_JMP_SLOT
1665 ENUMX
1666 BFD_RELOC_68K_RELATIVE
1667 ENUMX
1668 BFD_RELOC_68K_TLS_GD32
1669 ENUMX
1670 BFD_RELOC_68K_TLS_GD16
1671 ENUMX
1672 BFD_RELOC_68K_TLS_GD8
1673 ENUMX
1674 BFD_RELOC_68K_TLS_LDM32
1675 ENUMX
1676 BFD_RELOC_68K_TLS_LDM16
1677 ENUMX
1678 BFD_RELOC_68K_TLS_LDM8
1679 ENUMX
1680 BFD_RELOC_68K_TLS_LDO32
1681 ENUMX
1682 BFD_RELOC_68K_TLS_LDO16
1683 ENUMX
1684 BFD_RELOC_68K_TLS_LDO8
1685 ENUMX
1686 BFD_RELOC_68K_TLS_IE32
1687 ENUMX
1688 BFD_RELOC_68K_TLS_IE16
1689 ENUMX
1690 BFD_RELOC_68K_TLS_IE8
1691 ENUMX
1692 BFD_RELOC_68K_TLS_LE32
1693 ENUMX
1694 BFD_RELOC_68K_TLS_LE16
1695 ENUMX
1696 BFD_RELOC_68K_TLS_LE8
1697 ENUMDOC
1698 Relocations used by 68K ELF.
1699
1700 ENUM
1701 BFD_RELOC_32_BASEREL
1702 ENUMX
1703 BFD_RELOC_16_BASEREL
1704 ENUMX
1705 BFD_RELOC_LO16_BASEREL
1706 ENUMX
1707 BFD_RELOC_HI16_BASEREL
1708 ENUMX
1709 BFD_RELOC_HI16_S_BASEREL
1710 ENUMX
1711 BFD_RELOC_8_BASEREL
1712 ENUMX
1713 BFD_RELOC_RVA
1714 ENUMDOC
1715 Linkage-table relative.
1716
1717 ENUM
1718 BFD_RELOC_8_FFnn
1719 ENUMDOC
1720 Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1721
1722 ENUM
1723 BFD_RELOC_32_PCREL_S2
1724 ENUMX
1725 BFD_RELOC_16_PCREL_S2
1726 ENUMX
1727 BFD_RELOC_23_PCREL_S2
1728 ENUMDOC
1729 These PC-relative relocations are stored as word displacements --
1730 i.e., byte displacements shifted right two bits. The 30-bit word
1731 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1732 SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
1733 signed 16-bit displacement is used on the MIPS, and the 23-bit
1734 displacement is used on the Alpha.
1735
1736 ENUM
1737 BFD_RELOC_HI22
1738 ENUMX
1739 BFD_RELOC_LO10
1740 ENUMDOC
1741 High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1742 the target word. These are used on the SPARC.
1743
1744 ENUM
1745 BFD_RELOC_GPREL16
1746 ENUMX
1747 BFD_RELOC_GPREL32
1748 ENUMDOC
1749 For systems that allocate a Global Pointer register, these are
1750 displacements off that register. These relocation types are
1751 handled specially, because the value the register will have is
1752 decided relatively late.
1753
1754 ENUM
1755 BFD_RELOC_NONE
1756 ENUMX
1757 BFD_RELOC_SPARC_WDISP22
1758 ENUMX
1759 BFD_RELOC_SPARC22
1760 ENUMX
1761 BFD_RELOC_SPARC13
1762 ENUMX
1763 BFD_RELOC_SPARC_GOT10
1764 ENUMX
1765 BFD_RELOC_SPARC_GOT13
1766 ENUMX
1767 BFD_RELOC_SPARC_GOT22
1768 ENUMX
1769 BFD_RELOC_SPARC_PC10
1770 ENUMX
1771 BFD_RELOC_SPARC_PC22
1772 ENUMX
1773 BFD_RELOC_SPARC_WPLT30
1774 ENUMX
1775 BFD_RELOC_SPARC_COPY
1776 ENUMX
1777 BFD_RELOC_SPARC_GLOB_DAT
1778 ENUMX
1779 BFD_RELOC_SPARC_JMP_SLOT
1780 ENUMX
1781 BFD_RELOC_SPARC_RELATIVE
1782 ENUMX
1783 BFD_RELOC_SPARC_UA16
1784 ENUMX
1785 BFD_RELOC_SPARC_UA32
1786 ENUMX
1787 BFD_RELOC_SPARC_UA64
1788 ENUMX
1789 BFD_RELOC_SPARC_GOTDATA_HIX22
1790 ENUMX
1791 BFD_RELOC_SPARC_GOTDATA_LOX10
1792 ENUMX
1793 BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1794 ENUMX
1795 BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1796 ENUMX
1797 BFD_RELOC_SPARC_GOTDATA_OP
1798 ENUMX
1799 BFD_RELOC_SPARC_JMP_IREL
1800 ENUMX
1801 BFD_RELOC_SPARC_IRELATIVE
1802 ENUMDOC
1803 SPARC ELF relocations. There is probably some overlap with other
1804 relocation types already defined.
1805
1806 ENUM
1807 BFD_RELOC_SPARC_BASE13
1808 ENUMX
1809 BFD_RELOC_SPARC_BASE22
1810 ENUMDOC
1811 I think these are specific to SPARC a.out (e.g., Sun 4).
1812
1813 ENUMEQ
1814 BFD_RELOC_SPARC_64
1815 BFD_RELOC_64
1816 ENUMX
1817 BFD_RELOC_SPARC_10
1818 ENUMX
1819 BFD_RELOC_SPARC_11
1820 ENUMX
1821 BFD_RELOC_SPARC_OLO10
1822 ENUMX
1823 BFD_RELOC_SPARC_HH22
1824 ENUMX
1825 BFD_RELOC_SPARC_HM10
1826 ENUMX
1827 BFD_RELOC_SPARC_LM22
1828 ENUMX
1829 BFD_RELOC_SPARC_PC_HH22
1830 ENUMX
1831 BFD_RELOC_SPARC_PC_HM10
1832 ENUMX
1833 BFD_RELOC_SPARC_PC_LM22
1834 ENUMX
1835 BFD_RELOC_SPARC_WDISP16
1836 ENUMX
1837 BFD_RELOC_SPARC_WDISP19
1838 ENUMX
1839 BFD_RELOC_SPARC_7
1840 ENUMX
1841 BFD_RELOC_SPARC_6
1842 ENUMX
1843 BFD_RELOC_SPARC_5
1844 ENUMEQX
1845 BFD_RELOC_SPARC_DISP64
1846 BFD_RELOC_64_PCREL
1847 ENUMX
1848 BFD_RELOC_SPARC_PLT32
1849 ENUMX
1850 BFD_RELOC_SPARC_PLT64
1851 ENUMX
1852 BFD_RELOC_SPARC_HIX22
1853 ENUMX
1854 BFD_RELOC_SPARC_LOX10
1855 ENUMX
1856 BFD_RELOC_SPARC_H44
1857 ENUMX
1858 BFD_RELOC_SPARC_M44
1859 ENUMX
1860 BFD_RELOC_SPARC_L44
1861 ENUMX
1862 BFD_RELOC_SPARC_REGISTER
1863 ENUMX
1864 BFD_RELOC_SPARC_H34
1865 ENUMX
1866 BFD_RELOC_SPARC_SIZE32
1867 ENUMX
1868 BFD_RELOC_SPARC_SIZE64
1869 ENUMX
1870 BFD_RELOC_SPARC_WDISP10
1871 ENUMDOC
1872 SPARC64 relocations
1873
1874 ENUM
1875 BFD_RELOC_SPARC_REV32
1876 ENUMDOC
1877 SPARC little endian relocation
1878 ENUM
1879 BFD_RELOC_SPARC_TLS_GD_HI22
1880 ENUMX
1881 BFD_RELOC_SPARC_TLS_GD_LO10
1882 ENUMX
1883 BFD_RELOC_SPARC_TLS_GD_ADD
1884 ENUMX
1885 BFD_RELOC_SPARC_TLS_GD_CALL
1886 ENUMX
1887 BFD_RELOC_SPARC_TLS_LDM_HI22
1888 ENUMX
1889 BFD_RELOC_SPARC_TLS_LDM_LO10
1890 ENUMX
1891 BFD_RELOC_SPARC_TLS_LDM_ADD
1892 ENUMX
1893 BFD_RELOC_SPARC_TLS_LDM_CALL
1894 ENUMX
1895 BFD_RELOC_SPARC_TLS_LDO_HIX22
1896 ENUMX
1897 BFD_RELOC_SPARC_TLS_LDO_LOX10
1898 ENUMX
1899 BFD_RELOC_SPARC_TLS_LDO_ADD
1900 ENUMX
1901 BFD_RELOC_SPARC_TLS_IE_HI22
1902 ENUMX
1903 BFD_RELOC_SPARC_TLS_IE_LO10
1904 ENUMX
1905 BFD_RELOC_SPARC_TLS_IE_LD
1906 ENUMX
1907 BFD_RELOC_SPARC_TLS_IE_LDX
1908 ENUMX
1909 BFD_RELOC_SPARC_TLS_IE_ADD
1910 ENUMX
1911 BFD_RELOC_SPARC_TLS_LE_HIX22
1912 ENUMX
1913 BFD_RELOC_SPARC_TLS_LE_LOX10
1914 ENUMX
1915 BFD_RELOC_SPARC_TLS_DTPMOD32
1916 ENUMX
1917 BFD_RELOC_SPARC_TLS_DTPMOD64
1918 ENUMX
1919 BFD_RELOC_SPARC_TLS_DTPOFF32
1920 ENUMX
1921 BFD_RELOC_SPARC_TLS_DTPOFF64
1922 ENUMX
1923 BFD_RELOC_SPARC_TLS_TPOFF32
1924 ENUMX
1925 BFD_RELOC_SPARC_TLS_TPOFF64
1926 ENUMDOC
1927 SPARC TLS relocations
1928
1929 ENUM
1930 BFD_RELOC_SPU_IMM7
1931 ENUMX
1932 BFD_RELOC_SPU_IMM8
1933 ENUMX
1934 BFD_RELOC_SPU_IMM10
1935 ENUMX
1936 BFD_RELOC_SPU_IMM10W
1937 ENUMX
1938 BFD_RELOC_SPU_IMM16
1939 ENUMX
1940 BFD_RELOC_SPU_IMM16W
1941 ENUMX
1942 BFD_RELOC_SPU_IMM18
1943 ENUMX
1944 BFD_RELOC_SPU_PCREL9a
1945 ENUMX
1946 BFD_RELOC_SPU_PCREL9b
1947 ENUMX
1948 BFD_RELOC_SPU_PCREL16
1949 ENUMX
1950 BFD_RELOC_SPU_LO16
1951 ENUMX
1952 BFD_RELOC_SPU_HI16
1953 ENUMX
1954 BFD_RELOC_SPU_PPU32
1955 ENUMX
1956 BFD_RELOC_SPU_PPU64
1957 ENUMX
1958 BFD_RELOC_SPU_ADD_PIC
1959 ENUMDOC
1960 SPU Relocations.
1961
1962 ENUM
1963 BFD_RELOC_ALPHA_GPDISP_HI16
1964 ENUMDOC
1965 Alpha ECOFF and ELF relocations. Some of these treat the symbol or
1966 "addend" in some special way.
1967 For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1968 writing; when reading, it will be the absolute section symbol. The
1969 addend is the displacement in bytes of the "lda" instruction from
1970 the "ldah" instruction (which is at the address of this reloc).
1971 ENUM
1972 BFD_RELOC_ALPHA_GPDISP_LO16
1973 ENUMDOC
1974 For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
1975 with GPDISP_HI16 relocs. The addend is ignored when writing the
1976 relocations out, and is filled in with the file's GP value on
1977 reading, for convenience.
1978
1979 ENUM
1980 BFD_RELOC_ALPHA_GPDISP
1981 ENUMDOC
1982 The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
1983 relocation except that there is no accompanying GPDISP_LO16
1984 relocation.
1985
1986 ENUM
1987 BFD_RELOC_ALPHA_LITERAL
1988 ENUMX
1989 BFD_RELOC_ALPHA_ELF_LITERAL
1990 ENUMX
1991 BFD_RELOC_ALPHA_LITUSE
1992 ENUMDOC
1993 The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
1994 the assembler turns it into a LDQ instruction to load the address of
1995 the symbol, and then fills in a register in the real instruction.
1996
1997 The LITERAL reloc, at the LDQ instruction, refers to the .lita
1998 section symbol. The addend is ignored when writing, but is filled
1999 in with the file's GP value on reading, for convenience, as with the
2000 GPDISP_LO16 reloc.
2001
2002 The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2003 It should refer to the symbol to be referenced, as with 16_GOTOFF,
2004 but it generates output not based on the position within the .got
2005 section, but relative to the GP value chosen for the file during the
2006 final link stage.
2007
2008 The LITUSE reloc, on the instruction using the loaded address, gives
2009 information to the linker that it might be able to use to optimize
2010 away some literal section references. The symbol is ignored (read
2011 as the absolute section symbol), and the "addend" indicates the type
2012 of instruction using the register:
2013 1 - "memory" fmt insn
2014 2 - byte-manipulation (byte offset reg)
2015 3 - jsr (target of branch)
2016
2017 ENUM
2018 BFD_RELOC_ALPHA_HINT
2019 ENUMDOC
2020 The HINT relocation indicates a value that should be filled into the
2021 "hint" field of a jmp/jsr/ret instruction, for possible branch-
2022 prediction logic which may be provided on some processors.
2023
2024 ENUM
2025 BFD_RELOC_ALPHA_LINKAGE
2026 ENUMDOC
2027 The LINKAGE relocation outputs a linkage pair in the object file,
2028 which is filled by the linker.
2029
2030 ENUM
2031 BFD_RELOC_ALPHA_CODEADDR
2032 ENUMDOC
2033 The CODEADDR relocation outputs a STO_CA in the object file,
2034 which is filled by the linker.
2035
2036 ENUM
2037 BFD_RELOC_ALPHA_GPREL_HI16
2038 ENUMX
2039 BFD_RELOC_ALPHA_GPREL_LO16
2040 ENUMDOC
2041 The GPREL_HI/LO relocations together form a 32-bit offset from the
2042 GP register.
2043
2044 ENUM
2045 BFD_RELOC_ALPHA_BRSGP
2046 ENUMDOC
2047 Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2048 share a common GP, and the target address is adjusted for
2049 STO_ALPHA_STD_GPLOAD.
2050
2051 ENUM
2052 BFD_RELOC_ALPHA_NOP
2053 ENUMDOC
2054 The NOP relocation outputs a NOP if the longword displacement
2055 between two procedure entry points is < 2^21.
2056
2057 ENUM
2058 BFD_RELOC_ALPHA_BSR
2059 ENUMDOC
2060 The BSR relocation outputs a BSR if the longword displacement
2061 between two procedure entry points is < 2^21.
2062
2063 ENUM
2064 BFD_RELOC_ALPHA_LDA
2065 ENUMDOC
2066 The LDA relocation outputs a LDA if the longword displacement
2067 between two procedure entry points is < 2^16.
2068
2069 ENUM
2070 BFD_RELOC_ALPHA_BOH
2071 ENUMDOC
2072 The BOH relocation outputs a BSR if the longword displacement
2073 between two procedure entry points is < 2^21, or else a hint.
2074
2075 ENUM
2076 BFD_RELOC_ALPHA_TLSGD
2077 ENUMX
2078 BFD_RELOC_ALPHA_TLSLDM
2079 ENUMX
2080 BFD_RELOC_ALPHA_DTPMOD64
2081 ENUMX
2082 BFD_RELOC_ALPHA_GOTDTPREL16
2083 ENUMX
2084 BFD_RELOC_ALPHA_DTPREL64
2085 ENUMX
2086 BFD_RELOC_ALPHA_DTPREL_HI16
2087 ENUMX
2088 BFD_RELOC_ALPHA_DTPREL_LO16
2089 ENUMX
2090 BFD_RELOC_ALPHA_DTPREL16
2091 ENUMX
2092 BFD_RELOC_ALPHA_GOTTPREL16
2093 ENUMX
2094 BFD_RELOC_ALPHA_TPREL64
2095 ENUMX
2096 BFD_RELOC_ALPHA_TPREL_HI16
2097 ENUMX
2098 BFD_RELOC_ALPHA_TPREL_LO16
2099 ENUMX
2100 BFD_RELOC_ALPHA_TPREL16
2101 ENUMDOC
2102 Alpha thread-local storage relocations.
2103
2104 ENUM
2105 BFD_RELOC_MIPS_JMP
2106 ENUMX
2107 BFD_RELOC_MICROMIPS_JMP
2108 ENUMDOC
2109 The MIPS jump instruction.
2110
2111 ENUM
2112 BFD_RELOC_MIPS16_JMP
2113 ENUMDOC
2114 The MIPS16 jump instruction.
2115
2116 ENUM
2117 BFD_RELOC_MIPS16_GPREL
2118 ENUMDOC
2119 MIPS16 GP relative reloc.
2120
2121 ENUM
2122 BFD_RELOC_HI16
2123 ENUMDOC
2124 High 16 bits of 32-bit value; simple reloc.
2125
2126 ENUM
2127 BFD_RELOC_HI16_S
2128 ENUMDOC
2129 High 16 bits of 32-bit value but the low 16 bits will be sign
2130 extended and added to form the final result. If the low 16
2131 bits form a negative number, we need to add one to the high value
2132 to compensate for the borrow when the low bits are added.
2133
2134 ENUM
2135 BFD_RELOC_LO16
2136 ENUMDOC
2137 Low 16 bits.
2138
2139 ENUM
2140 BFD_RELOC_HI16_PCREL
2141 ENUMDOC
2142 High 16 bits of 32-bit pc-relative value
2143 ENUM
2144 BFD_RELOC_HI16_S_PCREL
2145 ENUMDOC
2146 High 16 bits of 32-bit pc-relative value, adjusted
2147 ENUM
2148 BFD_RELOC_LO16_PCREL
2149 ENUMDOC
2150 Low 16 bits of pc-relative value
2151
2152 ENUM
2153 BFD_RELOC_MIPS16_GOT16
2154 ENUMX
2155 BFD_RELOC_MIPS16_CALL16
2156 ENUMDOC
2157 Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2158 16-bit immediate fields
2159 ENUM
2160 BFD_RELOC_MIPS16_HI16
2161 ENUMDOC
2162 MIPS16 high 16 bits of 32-bit value.
2163 ENUM
2164 BFD_RELOC_MIPS16_HI16_S
2165 ENUMDOC
2166 MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2167 extended and added to form the final result. If the low 16
2168 bits form a negative number, we need to add one to the high value
2169 to compensate for the borrow when the low bits are added.
2170 ENUM
2171 BFD_RELOC_MIPS16_LO16
2172 ENUMDOC
2173 MIPS16 low 16 bits.
2174
2175 ENUM
2176 BFD_RELOC_MIPS16_TLS_GD
2177 ENUMX
2178 BFD_RELOC_MIPS16_TLS_LDM
2179 ENUMX
2180 BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2181 ENUMX
2182 BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2183 ENUMX
2184 BFD_RELOC_MIPS16_TLS_GOTTPREL
2185 ENUMX
2186 BFD_RELOC_MIPS16_TLS_TPREL_HI16
2187 ENUMX
2188 BFD_RELOC_MIPS16_TLS_TPREL_LO16
2189 ENUMDOC
2190 MIPS16 TLS relocations
2191
2192 ENUM
2193 BFD_RELOC_MIPS_LITERAL
2194 ENUMX
2195 BFD_RELOC_MICROMIPS_LITERAL
2196 ENUMDOC
2197 Relocation against a MIPS literal section.
2198
2199 ENUM
2200 BFD_RELOC_MICROMIPS_7_PCREL_S1
2201 ENUMX
2202 BFD_RELOC_MICROMIPS_10_PCREL_S1
2203 ENUMX
2204 BFD_RELOC_MICROMIPS_16_PCREL_S1
2205 ENUMDOC
2206 microMIPS PC-relative relocations.
2207
2208 ENUM
2209 BFD_RELOC_MIPS16_16_PCREL_S1
2210 ENUMDOC
2211 MIPS16 PC-relative relocation.
2212
2213 ENUM
2214 BFD_RELOC_MIPS_21_PCREL_S2
2215 ENUMX
2216 BFD_RELOC_MIPS_26_PCREL_S2
2217 ENUMX
2218 BFD_RELOC_MIPS_18_PCREL_S3
2219 ENUMX
2220 BFD_RELOC_MIPS_19_PCREL_S2
2221 ENUMDOC
2222 MIPS PC-relative relocations.
2223
2224 ENUM
2225 BFD_RELOC_MICROMIPS_GPREL16
2226 ENUMX
2227 BFD_RELOC_MICROMIPS_HI16
2228 ENUMX
2229 BFD_RELOC_MICROMIPS_HI16_S
2230 ENUMX
2231 BFD_RELOC_MICROMIPS_LO16
2232 ENUMDOC
2233 microMIPS versions of generic BFD relocs.
2234
2235 ENUM
2236 BFD_RELOC_MIPS_GOT16
2237 ENUMX
2238 BFD_RELOC_MICROMIPS_GOT16
2239 ENUMX
2240 BFD_RELOC_MIPS_CALL16
2241 ENUMX
2242 BFD_RELOC_MICROMIPS_CALL16
2243 ENUMX
2244 BFD_RELOC_MIPS_GOT_HI16
2245 ENUMX
2246 BFD_RELOC_MICROMIPS_GOT_HI16
2247 ENUMX
2248 BFD_RELOC_MIPS_GOT_LO16
2249 ENUMX
2250 BFD_RELOC_MICROMIPS_GOT_LO16
2251 ENUMX
2252 BFD_RELOC_MIPS_CALL_HI16
2253 ENUMX
2254 BFD_RELOC_MICROMIPS_CALL_HI16
2255 ENUMX
2256 BFD_RELOC_MIPS_CALL_LO16
2257 ENUMX
2258 BFD_RELOC_MICROMIPS_CALL_LO16
2259 ENUMX
2260 BFD_RELOC_MIPS_SUB
2261 ENUMX
2262 BFD_RELOC_MICROMIPS_SUB
2263 ENUMX
2264 BFD_RELOC_MIPS_GOT_PAGE
2265 ENUMX
2266 BFD_RELOC_MICROMIPS_GOT_PAGE
2267 ENUMX
2268 BFD_RELOC_MIPS_GOT_OFST
2269 ENUMX
2270 BFD_RELOC_MICROMIPS_GOT_OFST
2271 ENUMX
2272 BFD_RELOC_MIPS_GOT_DISP
2273 ENUMX
2274 BFD_RELOC_MICROMIPS_GOT_DISP
2275 ENUMX
2276 BFD_RELOC_MIPS_SHIFT5
2277 ENUMX
2278 BFD_RELOC_MIPS_SHIFT6
2279 ENUMX
2280 BFD_RELOC_MIPS_INSERT_A
2281 ENUMX
2282 BFD_RELOC_MIPS_INSERT_B
2283 ENUMX
2284 BFD_RELOC_MIPS_DELETE
2285 ENUMX
2286 BFD_RELOC_MIPS_HIGHEST
2287 ENUMX
2288 BFD_RELOC_MICROMIPS_HIGHEST
2289 ENUMX
2290 BFD_RELOC_MIPS_HIGHER
2291 ENUMX
2292 BFD_RELOC_MICROMIPS_HIGHER
2293 ENUMX
2294 BFD_RELOC_MIPS_SCN_DISP
2295 ENUMX
2296 BFD_RELOC_MICROMIPS_SCN_DISP
2297 ENUMX
2298 BFD_RELOC_MIPS_REL16
2299 ENUMX
2300 BFD_RELOC_MIPS_RELGOT
2301 ENUMX
2302 BFD_RELOC_MIPS_JALR
2303 ENUMX
2304 BFD_RELOC_MICROMIPS_JALR
2305 ENUMX
2306 BFD_RELOC_MIPS_TLS_DTPMOD32
2307 ENUMX
2308 BFD_RELOC_MIPS_TLS_DTPREL32
2309 ENUMX
2310 BFD_RELOC_MIPS_TLS_DTPMOD64
2311 ENUMX
2312 BFD_RELOC_MIPS_TLS_DTPREL64
2313 ENUMX
2314 BFD_RELOC_MIPS_TLS_GD
2315 ENUMX
2316 BFD_RELOC_MICROMIPS_TLS_GD
2317 ENUMX
2318 BFD_RELOC_MIPS_TLS_LDM
2319 ENUMX
2320 BFD_RELOC_MICROMIPS_TLS_LDM
2321 ENUMX
2322 BFD_RELOC_MIPS_TLS_DTPREL_HI16
2323 ENUMX
2324 BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2325 ENUMX
2326 BFD_RELOC_MIPS_TLS_DTPREL_LO16
2327 ENUMX
2328 BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2329 ENUMX
2330 BFD_RELOC_MIPS_TLS_GOTTPREL
2331 ENUMX
2332 BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2333 ENUMX
2334 BFD_RELOC_MIPS_TLS_TPREL32
2335 ENUMX
2336 BFD_RELOC_MIPS_TLS_TPREL64
2337 ENUMX
2338 BFD_RELOC_MIPS_TLS_TPREL_HI16
2339 ENUMX
2340 BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2341 ENUMX
2342 BFD_RELOC_MIPS_TLS_TPREL_LO16
2343 ENUMX
2344 BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2345 ENUMX
2346 BFD_RELOC_MIPS_EH
2347 ENUMDOC
2348 MIPS ELF relocations.
2349 COMMENT
2350
2351 ENUM
2352 BFD_RELOC_MIPS_COPY
2353 ENUMX
2354 BFD_RELOC_MIPS_JUMP_SLOT
2355 ENUMDOC
2356 MIPS ELF relocations (VxWorks and PLT extensions).
2357 COMMENT
2358
2359 ENUM
2360 BFD_RELOC_MOXIE_10_PCREL
2361 ENUMDOC
2362 Moxie ELF relocations.
2363 COMMENT
2364
2365 ENUM
2366 BFD_RELOC_FT32_10
2367 ENUMX
2368 BFD_RELOC_FT32_20
2369 ENUMX
2370 BFD_RELOC_FT32_17
2371 ENUMX
2372 BFD_RELOC_FT32_18
2373 ENUMX
2374 BFD_RELOC_FT32_RELAX
2375 ENUMX
2376 BFD_RELOC_FT32_SC0
2377 ENUMX
2378 BFD_RELOC_FT32_SC1
2379 ENUMX
2380 BFD_RELOC_FT32_15
2381 ENUMX
2382 BFD_RELOC_FT32_DIFF32
2383 ENUMDOC
2384 FT32 ELF relocations.
2385 COMMENT
2386
2387 ENUM
2388 BFD_RELOC_FRV_LABEL16
2389 ENUMX
2390 BFD_RELOC_FRV_LABEL24
2391 ENUMX
2392 BFD_RELOC_FRV_LO16
2393 ENUMX
2394 BFD_RELOC_FRV_HI16
2395 ENUMX
2396 BFD_RELOC_FRV_GPREL12
2397 ENUMX
2398 BFD_RELOC_FRV_GPRELU12
2399 ENUMX
2400 BFD_RELOC_FRV_GPREL32
2401 ENUMX
2402 BFD_RELOC_FRV_GPRELHI
2403 ENUMX
2404 BFD_RELOC_FRV_GPRELLO
2405 ENUMX
2406 BFD_RELOC_FRV_GOT12
2407 ENUMX
2408 BFD_RELOC_FRV_GOTHI
2409 ENUMX
2410 BFD_RELOC_FRV_GOTLO
2411 ENUMX
2412 BFD_RELOC_FRV_FUNCDESC
2413 ENUMX
2414 BFD_RELOC_FRV_FUNCDESC_GOT12
2415 ENUMX
2416 BFD_RELOC_FRV_FUNCDESC_GOTHI
2417 ENUMX
2418 BFD_RELOC_FRV_FUNCDESC_GOTLO
2419 ENUMX
2420 BFD_RELOC_FRV_FUNCDESC_VALUE
2421 ENUMX
2422 BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2423 ENUMX
2424 BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2425 ENUMX
2426 BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2427 ENUMX
2428 BFD_RELOC_FRV_GOTOFF12
2429 ENUMX
2430 BFD_RELOC_FRV_GOTOFFHI
2431 ENUMX
2432 BFD_RELOC_FRV_GOTOFFLO
2433 ENUMX
2434 BFD_RELOC_FRV_GETTLSOFF
2435 ENUMX
2436 BFD_RELOC_FRV_TLSDESC_VALUE
2437 ENUMX
2438 BFD_RELOC_FRV_GOTTLSDESC12
2439 ENUMX
2440 BFD_RELOC_FRV_GOTTLSDESCHI
2441 ENUMX
2442 BFD_RELOC_FRV_GOTTLSDESCLO
2443 ENUMX
2444 BFD_RELOC_FRV_TLSMOFF12
2445 ENUMX
2446 BFD_RELOC_FRV_TLSMOFFHI
2447 ENUMX
2448 BFD_RELOC_FRV_TLSMOFFLO
2449 ENUMX
2450 BFD_RELOC_FRV_GOTTLSOFF12
2451 ENUMX
2452 BFD_RELOC_FRV_GOTTLSOFFHI
2453 ENUMX
2454 BFD_RELOC_FRV_GOTTLSOFFLO
2455 ENUMX
2456 BFD_RELOC_FRV_TLSOFF
2457 ENUMX
2458 BFD_RELOC_FRV_TLSDESC_RELAX
2459 ENUMX
2460 BFD_RELOC_FRV_GETTLSOFF_RELAX
2461 ENUMX
2462 BFD_RELOC_FRV_TLSOFF_RELAX
2463 ENUMX
2464 BFD_RELOC_FRV_TLSMOFF
2465 ENUMDOC
2466 Fujitsu Frv Relocations.
2467 COMMENT
2468
2469 ENUM
2470 BFD_RELOC_MN10300_GOTOFF24
2471 ENUMDOC
2472 This is a 24bit GOT-relative reloc for the mn10300.
2473 ENUM
2474 BFD_RELOC_MN10300_GOT32
2475 ENUMDOC
2476 This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2477 in the instruction.
2478 ENUM
2479 BFD_RELOC_MN10300_GOT24
2480 ENUMDOC
2481 This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2482 in the instruction.
2483 ENUM
2484 BFD_RELOC_MN10300_GOT16
2485 ENUMDOC
2486 This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2487 in the instruction.
2488 ENUM
2489 BFD_RELOC_MN10300_COPY
2490 ENUMDOC
2491 Copy symbol at runtime.
2492 ENUM
2493 BFD_RELOC_MN10300_GLOB_DAT
2494 ENUMDOC
2495 Create GOT entry.
2496 ENUM
2497 BFD_RELOC_MN10300_JMP_SLOT
2498 ENUMDOC
2499 Create PLT entry.
2500 ENUM
2501 BFD_RELOC_MN10300_RELATIVE
2502 ENUMDOC
2503 Adjust by program base.
2504 ENUM
2505 BFD_RELOC_MN10300_SYM_DIFF
2506 ENUMDOC
2507 Together with another reloc targeted at the same location,
2508 allows for a value that is the difference of two symbols
2509 in the same section.
2510 ENUM
2511 BFD_RELOC_MN10300_ALIGN
2512 ENUMDOC
2513 The addend of this reloc is an alignment power that must
2514 be honoured at the offset's location, regardless of linker
2515 relaxation.
2516 ENUM
2517 BFD_RELOC_MN10300_TLS_GD
2518 ENUMX
2519 BFD_RELOC_MN10300_TLS_LD
2520 ENUMX
2521 BFD_RELOC_MN10300_TLS_LDO
2522 ENUMX
2523 BFD_RELOC_MN10300_TLS_GOTIE
2524 ENUMX
2525 BFD_RELOC_MN10300_TLS_IE
2526 ENUMX
2527 BFD_RELOC_MN10300_TLS_LE
2528 ENUMX
2529 BFD_RELOC_MN10300_TLS_DTPMOD
2530 ENUMX
2531 BFD_RELOC_MN10300_TLS_DTPOFF
2532 ENUMX
2533 BFD_RELOC_MN10300_TLS_TPOFF
2534 ENUMDOC
2535 Various TLS-related relocations.
2536 ENUM
2537 BFD_RELOC_MN10300_32_PCREL
2538 ENUMDOC
2539 This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2540 instruction.
2541 ENUM
2542 BFD_RELOC_MN10300_16_PCREL
2543 ENUMDOC
2544 This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2545 instruction.
2546 COMMENT
2547
2548 ENUM
2549 BFD_RELOC_386_GOT32
2550 ENUMX
2551 BFD_RELOC_386_PLT32
2552 ENUMX
2553 BFD_RELOC_386_COPY
2554 ENUMX
2555 BFD_RELOC_386_GLOB_DAT
2556 ENUMX
2557 BFD_RELOC_386_JUMP_SLOT
2558 ENUMX
2559 BFD_RELOC_386_RELATIVE
2560 ENUMX
2561 BFD_RELOC_386_GOTOFF
2562 ENUMX
2563 BFD_RELOC_386_GOTPC
2564 ENUMX
2565 BFD_RELOC_386_TLS_TPOFF
2566 ENUMX
2567 BFD_RELOC_386_TLS_IE
2568 ENUMX
2569 BFD_RELOC_386_TLS_GOTIE
2570 ENUMX
2571 BFD_RELOC_386_TLS_LE
2572 ENUMX
2573 BFD_RELOC_386_TLS_GD
2574 ENUMX
2575 BFD_RELOC_386_TLS_LDM
2576 ENUMX
2577 BFD_RELOC_386_TLS_LDO_32
2578 ENUMX
2579 BFD_RELOC_386_TLS_IE_32
2580 ENUMX
2581 BFD_RELOC_386_TLS_LE_32
2582 ENUMX
2583 BFD_RELOC_386_TLS_DTPMOD32
2584 ENUMX
2585 BFD_RELOC_386_TLS_DTPOFF32
2586 ENUMX
2587 BFD_RELOC_386_TLS_TPOFF32
2588 ENUMX
2589 BFD_RELOC_386_TLS_GOTDESC
2590 ENUMX
2591 BFD_RELOC_386_TLS_DESC_CALL
2592 ENUMX
2593 BFD_RELOC_386_TLS_DESC
2594 ENUMX
2595 BFD_RELOC_386_IRELATIVE
2596 ENUMX
2597 BFD_RELOC_386_GOT32X
2598 ENUMDOC
2599 i386/elf relocations
2600
2601 ENUM
2602 BFD_RELOC_X86_64_GOT32
2603 ENUMX
2604 BFD_RELOC_X86_64_PLT32
2605 ENUMX
2606 BFD_RELOC_X86_64_COPY
2607 ENUMX
2608 BFD_RELOC_X86_64_GLOB_DAT
2609 ENUMX
2610 BFD_RELOC_X86_64_JUMP_SLOT
2611 ENUMX
2612 BFD_RELOC_X86_64_RELATIVE
2613 ENUMX
2614 BFD_RELOC_X86_64_GOTPCREL
2615 ENUMX
2616 BFD_RELOC_X86_64_32S
2617 ENUMX
2618 BFD_RELOC_X86_64_DTPMOD64
2619 ENUMX
2620 BFD_RELOC_X86_64_DTPOFF64
2621 ENUMX
2622 BFD_RELOC_X86_64_TPOFF64
2623 ENUMX
2624 BFD_RELOC_X86_64_TLSGD
2625 ENUMX
2626 BFD_RELOC_X86_64_TLSLD
2627 ENUMX
2628 BFD_RELOC_X86_64_DTPOFF32
2629 ENUMX
2630 BFD_RELOC_X86_64_GOTTPOFF
2631 ENUMX
2632 BFD_RELOC_X86_64_TPOFF32
2633 ENUMX
2634 BFD_RELOC_X86_64_GOTOFF64
2635 ENUMX
2636 BFD_RELOC_X86_64_GOTPC32
2637 ENUMX
2638 BFD_RELOC_X86_64_GOT64
2639 ENUMX
2640 BFD_RELOC_X86_64_GOTPCREL64
2641 ENUMX
2642 BFD_RELOC_X86_64_GOTPC64
2643 ENUMX
2644 BFD_RELOC_X86_64_GOTPLT64
2645 ENUMX
2646 BFD_RELOC_X86_64_PLTOFF64
2647 ENUMX
2648 BFD_RELOC_X86_64_GOTPC32_TLSDESC
2649 ENUMX
2650 BFD_RELOC_X86_64_TLSDESC_CALL
2651 ENUMX
2652 BFD_RELOC_X86_64_TLSDESC
2653 ENUMX
2654 BFD_RELOC_X86_64_IRELATIVE
2655 ENUMX
2656 BFD_RELOC_X86_64_PC32_BND
2657 ENUMX
2658 BFD_RELOC_X86_64_PLT32_BND
2659 ENUMX
2660 BFD_RELOC_X86_64_GOTPCRELX
2661 ENUMX
2662 BFD_RELOC_X86_64_REX_GOTPCRELX
2663 ENUMDOC
2664 x86-64/elf relocations
2665
2666 ENUM
2667 BFD_RELOC_NS32K_IMM_8
2668 ENUMX
2669 BFD_RELOC_NS32K_IMM_16
2670 ENUMX
2671 BFD_RELOC_NS32K_IMM_32
2672 ENUMX
2673 BFD_RELOC_NS32K_IMM_8_PCREL
2674 ENUMX
2675 BFD_RELOC_NS32K_IMM_16_PCREL
2676 ENUMX
2677 BFD_RELOC_NS32K_IMM_32_PCREL
2678 ENUMX
2679 BFD_RELOC_NS32K_DISP_8
2680 ENUMX
2681 BFD_RELOC_NS32K_DISP_16
2682 ENUMX
2683 BFD_RELOC_NS32K_DISP_32
2684 ENUMX
2685 BFD_RELOC_NS32K_DISP_8_PCREL
2686 ENUMX
2687 BFD_RELOC_NS32K_DISP_16_PCREL
2688 ENUMX
2689 BFD_RELOC_NS32K_DISP_32_PCREL
2690 ENUMDOC
2691 ns32k relocations
2692
2693 ENUM
2694 BFD_RELOC_PDP11_DISP_8_PCREL
2695 ENUMX
2696 BFD_RELOC_PDP11_DISP_6_PCREL
2697 ENUMDOC
2698 PDP11 relocations
2699
2700 ENUM
2701 BFD_RELOC_PJ_CODE_HI16
2702 ENUMX
2703 BFD_RELOC_PJ_CODE_LO16
2704 ENUMX
2705 BFD_RELOC_PJ_CODE_DIR16
2706 ENUMX
2707 BFD_RELOC_PJ_CODE_DIR32
2708 ENUMX
2709 BFD_RELOC_PJ_CODE_REL16
2710 ENUMX
2711 BFD_RELOC_PJ_CODE_REL32
2712 ENUMDOC
2713 Picojava relocs. Not all of these appear in object files.
2714
2715 ENUM
2716 BFD_RELOC_PPC_B26
2717 ENUMX
2718 BFD_RELOC_PPC_BA26
2719 ENUMX
2720 BFD_RELOC_PPC_TOC16
2721 ENUMX
2722 BFD_RELOC_PPC_B16
2723 ENUMX
2724 BFD_RELOC_PPC_B16_BRTAKEN
2725 ENUMX
2726 BFD_RELOC_PPC_B16_BRNTAKEN
2727 ENUMX
2728 BFD_RELOC_PPC_BA16
2729 ENUMX
2730 BFD_RELOC_PPC_BA16_BRTAKEN
2731 ENUMX
2732 BFD_RELOC_PPC_BA16_BRNTAKEN
2733 ENUMX
2734 BFD_RELOC_PPC_COPY
2735 ENUMX
2736 BFD_RELOC_PPC_GLOB_DAT
2737 ENUMX
2738 BFD_RELOC_PPC_JMP_SLOT
2739 ENUMX
2740 BFD_RELOC_PPC_RELATIVE
2741 ENUMX
2742 BFD_RELOC_PPC_LOCAL24PC
2743 ENUMX
2744 BFD_RELOC_PPC_EMB_NADDR32
2745 ENUMX
2746 BFD_RELOC_PPC_EMB_NADDR16
2747 ENUMX
2748 BFD_RELOC_PPC_EMB_NADDR16_LO
2749 ENUMX
2750 BFD_RELOC_PPC_EMB_NADDR16_HI
2751 ENUMX
2752 BFD_RELOC_PPC_EMB_NADDR16_HA
2753 ENUMX
2754 BFD_RELOC_PPC_EMB_SDAI16
2755 ENUMX
2756 BFD_RELOC_PPC_EMB_SDA2I16
2757 ENUMX
2758 BFD_RELOC_PPC_EMB_SDA2REL
2759 ENUMX
2760 BFD_RELOC_PPC_EMB_SDA21
2761 ENUMX
2762 BFD_RELOC_PPC_EMB_MRKREF
2763 ENUMX
2764 BFD_RELOC_PPC_EMB_RELSEC16
2765 ENUMX
2766 BFD_RELOC_PPC_EMB_RELST_LO
2767 ENUMX
2768 BFD_RELOC_PPC_EMB_RELST_HI
2769 ENUMX
2770 BFD_RELOC_PPC_EMB_RELST_HA
2771 ENUMX
2772 BFD_RELOC_PPC_EMB_BIT_FLD
2773 ENUMX
2774 BFD_RELOC_PPC_EMB_RELSDA
2775 ENUMX
2776 BFD_RELOC_PPC_VLE_REL8
2777 ENUMX
2778 BFD_RELOC_PPC_VLE_REL15
2779 ENUMX
2780 BFD_RELOC_PPC_VLE_REL24
2781 ENUMX
2782 BFD_RELOC_PPC_VLE_LO16A
2783 ENUMX
2784 BFD_RELOC_PPC_VLE_LO16D
2785 ENUMX
2786 BFD_RELOC_PPC_VLE_HI16A
2787 ENUMX
2788 BFD_RELOC_PPC_VLE_HI16D
2789 ENUMX
2790 BFD_RELOC_PPC_VLE_HA16A
2791 ENUMX
2792 BFD_RELOC_PPC_VLE_HA16D
2793 ENUMX
2794 BFD_RELOC_PPC_VLE_SDA21
2795 ENUMX
2796 BFD_RELOC_PPC_VLE_SDA21_LO
2797 ENUMX
2798 BFD_RELOC_PPC_VLE_SDAREL_LO16A
2799 ENUMX
2800 BFD_RELOC_PPC_VLE_SDAREL_LO16D
2801 ENUMX
2802 BFD_RELOC_PPC_VLE_SDAREL_HI16A
2803 ENUMX
2804 BFD_RELOC_PPC_VLE_SDAREL_HI16D
2805 ENUMX
2806 BFD_RELOC_PPC_VLE_SDAREL_HA16A
2807 ENUMX
2808 BFD_RELOC_PPC_VLE_SDAREL_HA16D
2809 ENUMX
2810 BFD_RELOC_PPC_16DX_HA
2811 ENUMX
2812 BFD_RELOC_PPC_REL16DX_HA
2813 ENUMX
2814 BFD_RELOC_PPC64_HIGHER
2815 ENUMX
2816 BFD_RELOC_PPC64_HIGHER_S
2817 ENUMX
2818 BFD_RELOC_PPC64_HIGHEST
2819 ENUMX
2820 BFD_RELOC_PPC64_HIGHEST_S
2821 ENUMX
2822 BFD_RELOC_PPC64_TOC16_LO
2823 ENUMX
2824 BFD_RELOC_PPC64_TOC16_HI
2825 ENUMX
2826 BFD_RELOC_PPC64_TOC16_HA
2827 ENUMX
2828 BFD_RELOC_PPC64_TOC
2829 ENUMX
2830 BFD_RELOC_PPC64_PLTGOT16
2831 ENUMX
2832 BFD_RELOC_PPC64_PLTGOT16_LO
2833 ENUMX
2834 BFD_RELOC_PPC64_PLTGOT16_HI
2835 ENUMX
2836 BFD_RELOC_PPC64_PLTGOT16_HA
2837 ENUMX
2838 BFD_RELOC_PPC64_ADDR16_DS
2839 ENUMX
2840 BFD_RELOC_PPC64_ADDR16_LO_DS
2841 ENUMX
2842 BFD_RELOC_PPC64_GOT16_DS
2843 ENUMX
2844 BFD_RELOC_PPC64_GOT16_LO_DS
2845 ENUMX
2846 BFD_RELOC_PPC64_PLT16_LO_DS
2847 ENUMX
2848 BFD_RELOC_PPC64_SECTOFF_DS
2849 ENUMX
2850 BFD_RELOC_PPC64_SECTOFF_LO_DS
2851 ENUMX
2852 BFD_RELOC_PPC64_TOC16_DS
2853 ENUMX
2854 BFD_RELOC_PPC64_TOC16_LO_DS
2855 ENUMX
2856 BFD_RELOC_PPC64_PLTGOT16_DS
2857 ENUMX
2858 BFD_RELOC_PPC64_PLTGOT16_LO_DS
2859 ENUMX
2860 BFD_RELOC_PPC64_ADDR16_HIGH
2861 ENUMX
2862 BFD_RELOC_PPC64_ADDR16_HIGHA
2863 ENUMX
2864 BFD_RELOC_PPC64_REL16_HIGH
2865 ENUMX
2866 BFD_RELOC_PPC64_REL16_HIGHA
2867 ENUMX
2868 BFD_RELOC_PPC64_REL16_HIGHER
2869 ENUMX
2870 BFD_RELOC_PPC64_REL16_HIGHERA
2871 ENUMX
2872 BFD_RELOC_PPC64_REL16_HIGHEST
2873 ENUMX
2874 BFD_RELOC_PPC64_REL16_HIGHESTA
2875 ENUMX
2876 BFD_RELOC_PPC64_ADDR64_LOCAL
2877 ENUMX
2878 BFD_RELOC_PPC64_ENTRY
2879 ENUMX
2880 BFD_RELOC_PPC64_REL24_NOTOC
2881 ENUMX
2882 BFD_RELOC_PPC64_D34
2883 ENUMX
2884 BFD_RELOC_PPC64_D34_LO
2885 ENUMX
2886 BFD_RELOC_PPC64_D34_HI30
2887 ENUMX
2888 BFD_RELOC_PPC64_D34_HA30
2889 ENUMX
2890 BFD_RELOC_PPC64_PCREL34
2891 ENUMX
2892 BFD_RELOC_PPC64_GOT_PCREL34
2893 ENUMX
2894 BFD_RELOC_PPC64_PLT_PCREL34
2895 ENUMX
2896 BFD_RELOC_PPC64_ADDR16_HIGHER34
2897 ENUMX
2898 BFD_RELOC_PPC64_ADDR16_HIGHERA34
2899 ENUMX
2900 BFD_RELOC_PPC64_ADDR16_HIGHEST34
2901 ENUMX
2902 BFD_RELOC_PPC64_ADDR16_HIGHESTA34
2903 ENUMX
2904 BFD_RELOC_PPC64_REL16_HIGHER34
2905 ENUMX
2906 BFD_RELOC_PPC64_REL16_HIGHERA34
2907 ENUMX
2908 BFD_RELOC_PPC64_REL16_HIGHEST34
2909 ENUMX
2910 BFD_RELOC_PPC64_REL16_HIGHESTA34
2911 ENUMX
2912 BFD_RELOC_PPC64_D28
2913 ENUMX
2914 BFD_RELOC_PPC64_PCREL28
2915 ENUMDOC
2916 Power(rs6000) and PowerPC relocations.
2917
2918 ENUM
2919 BFD_RELOC_PPC_TLS
2920 ENUMX
2921 BFD_RELOC_PPC_TLSGD
2922 ENUMX
2923 BFD_RELOC_PPC_TLSLD
2924 ENUMX
2925 BFD_RELOC_PPC_DTPMOD
2926 ENUMX
2927 BFD_RELOC_PPC_TPREL16
2928 ENUMX
2929 BFD_RELOC_PPC_TPREL16_LO
2930 ENUMX
2931 BFD_RELOC_PPC_TPREL16_HI
2932 ENUMX
2933 BFD_RELOC_PPC_TPREL16_HA
2934 ENUMX
2935 BFD_RELOC_PPC_TPREL
2936 ENUMX
2937 BFD_RELOC_PPC_DTPREL16
2938 ENUMX
2939 BFD_RELOC_PPC_DTPREL16_LO
2940 ENUMX
2941 BFD_RELOC_PPC_DTPREL16_HI
2942 ENUMX
2943 BFD_RELOC_PPC_DTPREL16_HA
2944 ENUMX
2945 BFD_RELOC_PPC_DTPREL
2946 ENUMX
2947 BFD_RELOC_PPC_GOT_TLSGD16
2948 ENUMX
2949 BFD_RELOC_PPC_GOT_TLSGD16_LO
2950 ENUMX
2951 BFD_RELOC_PPC_GOT_TLSGD16_HI
2952 ENUMX
2953 BFD_RELOC_PPC_GOT_TLSGD16_HA
2954 ENUMX
2955 BFD_RELOC_PPC_GOT_TLSLD16
2956 ENUMX
2957 BFD_RELOC_PPC_GOT_TLSLD16_LO
2958 ENUMX
2959 BFD_RELOC_PPC_GOT_TLSLD16_HI
2960 ENUMX
2961 BFD_RELOC_PPC_GOT_TLSLD16_HA
2962 ENUMX
2963 BFD_RELOC_PPC_GOT_TPREL16
2964 ENUMX
2965 BFD_RELOC_PPC_GOT_TPREL16_LO
2966 ENUMX
2967 BFD_RELOC_PPC_GOT_TPREL16_HI
2968 ENUMX
2969 BFD_RELOC_PPC_GOT_TPREL16_HA
2970 ENUMX
2971 BFD_RELOC_PPC_GOT_DTPREL16
2972 ENUMX
2973 BFD_RELOC_PPC_GOT_DTPREL16_LO
2974 ENUMX
2975 BFD_RELOC_PPC_GOT_DTPREL16_HI
2976 ENUMX
2977 BFD_RELOC_PPC_GOT_DTPREL16_HA
2978 ENUMX
2979 BFD_RELOC_PPC64_TPREL16_DS
2980 ENUMX
2981 BFD_RELOC_PPC64_TPREL16_LO_DS
2982 ENUMX
2983 BFD_RELOC_PPC64_TPREL16_HIGH
2984 ENUMX
2985 BFD_RELOC_PPC64_TPREL16_HIGHA
2986 ENUMX
2987 BFD_RELOC_PPC64_TPREL16_HIGHER
2988 ENUMX
2989 BFD_RELOC_PPC64_TPREL16_HIGHERA
2990 ENUMX
2991 BFD_RELOC_PPC64_TPREL16_HIGHEST
2992 ENUMX
2993 BFD_RELOC_PPC64_TPREL16_HIGHESTA
2994 ENUMX
2995 BFD_RELOC_PPC64_DTPREL16_DS
2996 ENUMX
2997 BFD_RELOC_PPC64_DTPREL16_LO_DS
2998 ENUMX
2999 BFD_RELOC_PPC64_DTPREL16_HIGH
3000 ENUMX
3001 BFD_RELOC_PPC64_DTPREL16_HIGHA
3002 ENUMX
3003 BFD_RELOC_PPC64_DTPREL16_HIGHER
3004 ENUMX
3005 BFD_RELOC_PPC64_DTPREL16_HIGHERA
3006 ENUMX
3007 BFD_RELOC_PPC64_DTPREL16_HIGHEST
3008 ENUMX
3009 BFD_RELOC_PPC64_DTPREL16_HIGHESTA
3010 ENUMX
3011 BFD_RELOC_PPC64_TPREL34
3012 ENUMX
3013 BFD_RELOC_PPC64_DTPREL34
3014 ENUMX
3015 BFD_RELOC_PPC64_GOT_TLSGD34
3016 ENUMX
3017 BFD_RELOC_PPC64_GOT_TLSLD34
3018 ENUMX
3019 BFD_RELOC_PPC64_GOT_TPREL34
3020 ENUMX
3021 BFD_RELOC_PPC64_GOT_DTPREL34
3022 ENUMX
3023 BFD_RELOC_PPC64_TLS_PCREL
3024 ENUMDOC
3025 PowerPC and PowerPC64 thread-local storage relocations.
3026
3027 ENUM
3028 BFD_RELOC_I370_D12
3029 ENUMDOC
3030 IBM 370/390 relocations
3031
3032 ENUM
3033 BFD_RELOC_CTOR
3034 ENUMDOC
3035 The type of reloc used to build a constructor table - at the moment
3036 probably a 32 bit wide absolute relocation, but the target can choose.
3037 It generally does map to one of the other relocation types.
3038
3039 ENUM
3040 BFD_RELOC_ARM_PCREL_BRANCH
3041 ENUMDOC
3042 ARM 26 bit pc-relative branch. The lowest two bits must be zero and are
3043 not stored in the instruction.
3044 ENUM
3045 BFD_RELOC_ARM_PCREL_BLX
3046 ENUMDOC
3047 ARM 26 bit pc-relative branch. The lowest bit must be zero and is
3048 not stored in the instruction. The 2nd lowest bit comes from a 1 bit
3049 field in the instruction.
3050 ENUM
3051 BFD_RELOC_THUMB_PCREL_BLX
3052 ENUMDOC
3053 Thumb 22 bit pc-relative branch. The lowest bit must be zero and is
3054 not stored in the instruction. The 2nd lowest bit comes from a 1 bit
3055 field in the instruction.
3056 ENUM
3057 BFD_RELOC_ARM_PCREL_CALL
3058 ENUMDOC
3059 ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3060 ENUM
3061 BFD_RELOC_ARM_PCREL_JUMP
3062 ENUMDOC
3063 ARM 26-bit pc-relative branch for B or conditional BL instruction.
3064
3065 ENUM
3066 BFD_RELOC_THUMB_PCREL_BRANCH5
3067 ENUMDOC
3068 ARM 5-bit pc-relative branch for Branch Future instructions.
3069
3070 ENUM
3071 BFD_RELOC_THUMB_PCREL_BFCSEL
3072 ENUMDOC
3073 ARM 6-bit pc-relative branch for BFCSEL instruction.
3074
3075 ENUM
3076 BFD_RELOC_ARM_THUMB_BF17
3077 ENUMDOC
3078 ARM 17-bit pc-relative branch for Branch Future instructions.
3079
3080 ENUM
3081 BFD_RELOC_ARM_THUMB_BF13
3082 ENUMDOC
3083 ARM 13-bit pc-relative branch for BFCSEL instruction.
3084
3085 ENUM
3086 BFD_RELOC_ARM_THUMB_BF19
3087 ENUMDOC
3088 ARM 19-bit pc-relative branch for Branch Future Link instruction.
3089
3090 ENUM
3091 BFD_RELOC_ARM_THUMB_LOOP12
3092 ENUMDOC
3093 ARM 12-bit pc-relative branch for Low Overhead Loop instructions.
3094
3095 ENUM
3096 BFD_RELOC_THUMB_PCREL_BRANCH7
3097 ENUMX
3098 BFD_RELOC_THUMB_PCREL_BRANCH9
3099 ENUMX
3100 BFD_RELOC_THUMB_PCREL_BRANCH12
3101 ENUMX
3102 BFD_RELOC_THUMB_PCREL_BRANCH20
3103 ENUMX
3104 BFD_RELOC_THUMB_PCREL_BRANCH23
3105 ENUMX
3106 BFD_RELOC_THUMB_PCREL_BRANCH25
3107 ENUMDOC
3108 Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3109 The lowest bit must be zero and is not stored in the instruction.
3110 Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3111 "nn" one smaller in all cases. Note further that BRANCH23
3112 corresponds to R_ARM_THM_CALL.
3113
3114 ENUM
3115 BFD_RELOC_ARM_OFFSET_IMM
3116 ENUMDOC
3117 12-bit immediate offset, used in ARM-format ldr and str instructions.
3118
3119 ENUM
3120 BFD_RELOC_ARM_THUMB_OFFSET
3121 ENUMDOC
3122 5-bit immediate offset, used in Thumb-format ldr and str instructions.
3123
3124 ENUM
3125 BFD_RELOC_ARM_TARGET1
3126 ENUMDOC
3127 Pc-relative or absolute relocation depending on target. Used for
3128 entries in .init_array sections.
3129 ENUM
3130 BFD_RELOC_ARM_ROSEGREL32
3131 ENUMDOC
3132 Read-only segment base relative address.
3133 ENUM
3134 BFD_RELOC_ARM_SBREL32
3135 ENUMDOC
3136 Data segment base relative address.
3137 ENUM
3138 BFD_RELOC_ARM_TARGET2
3139 ENUMDOC
3140 This reloc is used for references to RTTI data from exception handling
3141 tables. The actual definition depends on the target. It may be a
3142 pc-relative or some form of GOT-indirect relocation.
3143 ENUM
3144 BFD_RELOC_ARM_PREL31
3145 ENUMDOC
3146 31-bit PC relative address.
3147 ENUM
3148 BFD_RELOC_ARM_MOVW
3149 ENUMX
3150 BFD_RELOC_ARM_MOVT
3151 ENUMX
3152 BFD_RELOC_ARM_MOVW_PCREL
3153 ENUMX
3154 BFD_RELOC_ARM_MOVT_PCREL
3155 ENUMX
3156 BFD_RELOC_ARM_THUMB_MOVW
3157 ENUMX
3158 BFD_RELOC_ARM_THUMB_MOVT
3159 ENUMX
3160 BFD_RELOC_ARM_THUMB_MOVW_PCREL
3161 ENUMX
3162 BFD_RELOC_ARM_THUMB_MOVT_PCREL
3163 ENUMDOC
3164 Low and High halfword relocations for MOVW and MOVT instructions.
3165
3166 ENUM
3167 BFD_RELOC_ARM_GOTFUNCDESC
3168 ENUMX
3169 BFD_RELOC_ARM_GOTOFFFUNCDESC
3170 ENUMX
3171 BFD_RELOC_ARM_FUNCDESC
3172 ENUMX
3173 BFD_RELOC_ARM_FUNCDESC_VALUE
3174 ENUMX
3175 BFD_RELOC_ARM_TLS_GD32_FDPIC
3176 ENUMX
3177 BFD_RELOC_ARM_TLS_LDM32_FDPIC
3178 ENUMX
3179 BFD_RELOC_ARM_TLS_IE32_FDPIC
3180 ENUMDOC
3181 ARM FDPIC specific relocations.
3182
3183 ENUM
3184 BFD_RELOC_ARM_JUMP_SLOT
3185 ENUMX
3186 BFD_RELOC_ARM_GLOB_DAT
3187 ENUMX
3188 BFD_RELOC_ARM_GOT32
3189 ENUMX
3190 BFD_RELOC_ARM_PLT32
3191 ENUMX
3192 BFD_RELOC_ARM_RELATIVE
3193 ENUMX
3194 BFD_RELOC_ARM_GOTOFF
3195 ENUMX
3196 BFD_RELOC_ARM_GOTPC
3197 ENUMX
3198 BFD_RELOC_ARM_GOT_PREL
3199 ENUMDOC
3200 Relocations for setting up GOTs and PLTs for shared libraries.
3201
3202 ENUM
3203 BFD_RELOC_ARM_TLS_GD32
3204 ENUMX
3205 BFD_RELOC_ARM_TLS_LDO32
3206 ENUMX
3207 BFD_RELOC_ARM_TLS_LDM32
3208 ENUMX
3209 BFD_RELOC_ARM_TLS_DTPOFF32
3210 ENUMX
3211 BFD_RELOC_ARM_TLS_DTPMOD32
3212 ENUMX
3213 BFD_RELOC_ARM_TLS_TPOFF32
3214 ENUMX
3215 BFD_RELOC_ARM_TLS_IE32
3216 ENUMX
3217 BFD_RELOC_ARM_TLS_LE32
3218 ENUMX
3219 BFD_RELOC_ARM_TLS_GOTDESC
3220 ENUMX
3221 BFD_RELOC_ARM_TLS_CALL
3222 ENUMX
3223 BFD_RELOC_ARM_THM_TLS_CALL
3224 ENUMX
3225 BFD_RELOC_ARM_TLS_DESCSEQ
3226 ENUMX
3227 BFD_RELOC_ARM_THM_TLS_DESCSEQ
3228 ENUMX
3229 BFD_RELOC_ARM_TLS_DESC
3230 ENUMDOC
3231 ARM thread-local storage relocations.
3232
3233 ENUM
3234 BFD_RELOC_ARM_ALU_PC_G0_NC
3235 ENUMX
3236 BFD_RELOC_ARM_ALU_PC_G0
3237 ENUMX
3238 BFD_RELOC_ARM_ALU_PC_G1_NC
3239 ENUMX
3240 BFD_RELOC_ARM_ALU_PC_G1
3241 ENUMX
3242 BFD_RELOC_ARM_ALU_PC_G2
3243 ENUMX
3244 BFD_RELOC_ARM_LDR_PC_G0
3245 ENUMX
3246 BFD_RELOC_ARM_LDR_PC_G1
3247 ENUMX
3248 BFD_RELOC_ARM_LDR_PC_G2
3249 ENUMX
3250 BFD_RELOC_ARM_LDRS_PC_G0
3251 ENUMX
3252 BFD_RELOC_ARM_LDRS_PC_G1
3253 ENUMX
3254 BFD_RELOC_ARM_LDRS_PC_G2
3255 ENUMX
3256 BFD_RELOC_ARM_LDC_PC_G0
3257 ENUMX
3258 BFD_RELOC_ARM_LDC_PC_G1
3259 ENUMX
3260 BFD_RELOC_ARM_LDC_PC_G2
3261 ENUMX
3262 BFD_RELOC_ARM_ALU_SB_G0_NC
3263 ENUMX
3264 BFD_RELOC_ARM_ALU_SB_G0
3265 ENUMX
3266 BFD_RELOC_ARM_ALU_SB_G1_NC
3267 ENUMX
3268 BFD_RELOC_ARM_ALU_SB_G1
3269 ENUMX
3270 BFD_RELOC_ARM_ALU_SB_G2
3271 ENUMX
3272 BFD_RELOC_ARM_LDR_SB_G0
3273 ENUMX
3274 BFD_RELOC_ARM_LDR_SB_G1
3275 ENUMX
3276 BFD_RELOC_ARM_LDR_SB_G2
3277 ENUMX
3278 BFD_RELOC_ARM_LDRS_SB_G0
3279 ENUMX
3280 BFD_RELOC_ARM_LDRS_SB_G1
3281 ENUMX
3282 BFD_RELOC_ARM_LDRS_SB_G2
3283 ENUMX
3284 BFD_RELOC_ARM_LDC_SB_G0
3285 ENUMX
3286 BFD_RELOC_ARM_LDC_SB_G1
3287 ENUMX
3288 BFD_RELOC_ARM_LDC_SB_G2
3289 ENUMDOC
3290 ARM group relocations.
3291
3292 ENUM
3293 BFD_RELOC_ARM_V4BX
3294 ENUMDOC
3295 Annotation of BX instructions.
3296
3297 ENUM
3298 BFD_RELOC_ARM_IRELATIVE
3299 ENUMDOC
3300 ARM support for STT_GNU_IFUNC.
3301
3302 ENUM
3303 BFD_RELOC_ARM_THUMB_ALU_ABS_G0_NC
3304 ENUMX
3305 BFD_RELOC_ARM_THUMB_ALU_ABS_G1_NC
3306 ENUMX
3307 BFD_RELOC_ARM_THUMB_ALU_ABS_G2_NC
3308 ENUMX
3309 BFD_RELOC_ARM_THUMB_ALU_ABS_G3_NC
3310 ENUMDOC
3311 Thumb1 relocations to support execute-only code.
3312
3313 ENUM
3314 BFD_RELOC_ARM_IMMEDIATE
3315 ENUMX
3316 BFD_RELOC_ARM_ADRL_IMMEDIATE
3317 ENUMX
3318 BFD_RELOC_ARM_T32_IMMEDIATE
3319 ENUMX
3320 BFD_RELOC_ARM_T32_ADD_IMM
3321 ENUMX
3322 BFD_RELOC_ARM_T32_IMM12
3323 ENUMX
3324 BFD_RELOC_ARM_T32_ADD_PC12
3325 ENUMX
3326 BFD_RELOC_ARM_SHIFT_IMM
3327 ENUMX
3328 BFD_RELOC_ARM_SMC
3329 ENUMX
3330 BFD_RELOC_ARM_HVC
3331 ENUMX
3332 BFD_RELOC_ARM_SWI
3333 ENUMX
3334 BFD_RELOC_ARM_MULTI
3335 ENUMX
3336 BFD_RELOC_ARM_CP_OFF_IMM
3337 ENUMX
3338 BFD_RELOC_ARM_CP_OFF_IMM_S2
3339 ENUMX
3340 BFD_RELOC_ARM_T32_CP_OFF_IMM
3341 ENUMX
3342 BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3343 ENUMX
3344 BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM
3345 ENUMX
3346 BFD_RELOC_ARM_ADR_IMM
3347 ENUMX
3348 BFD_RELOC_ARM_LDR_IMM
3349 ENUMX
3350 BFD_RELOC_ARM_LITERAL
3351 ENUMX
3352 BFD_RELOC_ARM_IN_POOL
3353 ENUMX
3354 BFD_RELOC_ARM_OFFSET_IMM8
3355 ENUMX
3356 BFD_RELOC_ARM_T32_OFFSET_U8
3357 ENUMX
3358 BFD_RELOC_ARM_T32_OFFSET_IMM
3359 ENUMX
3360 BFD_RELOC_ARM_HWLITERAL
3361 ENUMX
3362 BFD_RELOC_ARM_THUMB_ADD
3363 ENUMX
3364 BFD_RELOC_ARM_THUMB_IMM
3365 ENUMX
3366 BFD_RELOC_ARM_THUMB_SHIFT
3367 ENUMDOC
3368 These relocs are only used within the ARM assembler. They are not
3369 (at present) written to any object files.
3370
3371 ENUM
3372 BFD_RELOC_SH_PCDISP8BY2
3373 ENUMX
3374 BFD_RELOC_SH_PCDISP12BY2
3375 ENUMX
3376 BFD_RELOC_SH_IMM3
3377 ENUMX
3378 BFD_RELOC_SH_IMM3U
3379 ENUMX
3380 BFD_RELOC_SH_DISP12
3381 ENUMX
3382 BFD_RELOC_SH_DISP12BY2
3383 ENUMX
3384 BFD_RELOC_SH_DISP12BY4
3385 ENUMX
3386 BFD_RELOC_SH_DISP12BY8
3387 ENUMX
3388 BFD_RELOC_SH_DISP20
3389 ENUMX
3390 BFD_RELOC_SH_DISP20BY8
3391 ENUMX
3392 BFD_RELOC_SH_IMM4
3393 ENUMX
3394 BFD_RELOC_SH_IMM4BY2
3395 ENUMX
3396 BFD_RELOC_SH_IMM4BY4
3397 ENUMX
3398 BFD_RELOC_SH_IMM8
3399 ENUMX
3400 BFD_RELOC_SH_IMM8BY2
3401 ENUMX
3402 BFD_RELOC_SH_IMM8BY4
3403 ENUMX
3404 BFD_RELOC_SH_PCRELIMM8BY2
3405 ENUMX
3406 BFD_RELOC_SH_PCRELIMM8BY4
3407 ENUMX
3408 BFD_RELOC_SH_SWITCH16
3409 ENUMX
3410 BFD_RELOC_SH_SWITCH32
3411 ENUMX
3412 BFD_RELOC_SH_USES
3413 ENUMX
3414 BFD_RELOC_SH_COUNT
3415 ENUMX
3416 BFD_RELOC_SH_ALIGN
3417 ENUMX
3418 BFD_RELOC_SH_CODE
3419 ENUMX
3420 BFD_RELOC_SH_DATA
3421 ENUMX
3422 BFD_RELOC_SH_LABEL
3423 ENUMX
3424 BFD_RELOC_SH_LOOP_START
3425 ENUMX
3426 BFD_RELOC_SH_LOOP_END
3427 ENUMX
3428 BFD_RELOC_SH_COPY
3429 ENUMX
3430 BFD_RELOC_SH_GLOB_DAT
3431 ENUMX
3432 BFD_RELOC_SH_JMP_SLOT
3433 ENUMX
3434 BFD_RELOC_SH_RELATIVE
3435 ENUMX
3436 BFD_RELOC_SH_GOTPC
3437 ENUMX
3438 BFD_RELOC_SH_GOT_LOW16
3439 ENUMX
3440 BFD_RELOC_SH_GOT_MEDLOW16
3441 ENUMX
3442 BFD_RELOC_SH_GOT_MEDHI16
3443 ENUMX
3444 BFD_RELOC_SH_GOT_HI16
3445 ENUMX
3446 BFD_RELOC_SH_GOTPLT_LOW16
3447 ENUMX
3448 BFD_RELOC_SH_GOTPLT_MEDLOW16
3449 ENUMX
3450 BFD_RELOC_SH_GOTPLT_MEDHI16
3451 ENUMX
3452 BFD_RELOC_SH_GOTPLT_HI16
3453 ENUMX
3454 BFD_RELOC_SH_PLT_LOW16
3455 ENUMX
3456 BFD_RELOC_SH_PLT_MEDLOW16
3457 ENUMX
3458 BFD_RELOC_SH_PLT_MEDHI16
3459 ENUMX
3460 BFD_RELOC_SH_PLT_HI16
3461 ENUMX
3462 BFD_RELOC_SH_GOTOFF_LOW16
3463 ENUMX
3464 BFD_RELOC_SH_GOTOFF_MEDLOW16
3465 ENUMX
3466 BFD_RELOC_SH_GOTOFF_MEDHI16
3467 ENUMX
3468 BFD_RELOC_SH_GOTOFF_HI16
3469 ENUMX
3470 BFD_RELOC_SH_GOTPC_LOW16
3471 ENUMX
3472 BFD_RELOC_SH_GOTPC_MEDLOW16
3473 ENUMX
3474 BFD_RELOC_SH_GOTPC_MEDHI16
3475 ENUMX
3476 BFD_RELOC_SH_GOTPC_HI16
3477 ENUMX
3478 BFD_RELOC_SH_COPY64
3479 ENUMX
3480 BFD_RELOC_SH_GLOB_DAT64
3481 ENUMX
3482 BFD_RELOC_SH_JMP_SLOT64
3483 ENUMX
3484 BFD_RELOC_SH_RELATIVE64
3485 ENUMX
3486 BFD_RELOC_SH_GOT10BY4
3487 ENUMX
3488 BFD_RELOC_SH_GOT10BY8
3489 ENUMX
3490 BFD_RELOC_SH_GOTPLT10BY4
3491 ENUMX
3492 BFD_RELOC_SH_GOTPLT10BY8
3493 ENUMX
3494 BFD_RELOC_SH_GOTPLT32
3495 ENUMX
3496 BFD_RELOC_SH_SHMEDIA_CODE
3497 ENUMX
3498 BFD_RELOC_SH_IMMU5
3499 ENUMX
3500 BFD_RELOC_SH_IMMS6
3501 ENUMX
3502 BFD_RELOC_SH_IMMS6BY32
3503 ENUMX
3504 BFD_RELOC_SH_IMMU6
3505 ENUMX
3506 BFD_RELOC_SH_IMMS10
3507 ENUMX
3508 BFD_RELOC_SH_IMMS10BY2
3509 ENUMX
3510 BFD_RELOC_SH_IMMS10BY4
3511 ENUMX
3512 BFD_RELOC_SH_IMMS10BY8
3513 ENUMX
3514 BFD_RELOC_SH_IMMS16
3515 ENUMX
3516 BFD_RELOC_SH_IMMU16
3517 ENUMX
3518 BFD_RELOC_SH_IMM_LOW16
3519 ENUMX
3520 BFD_RELOC_SH_IMM_LOW16_PCREL
3521 ENUMX
3522 BFD_RELOC_SH_IMM_MEDLOW16
3523 ENUMX
3524 BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3525 ENUMX
3526 BFD_RELOC_SH_IMM_MEDHI16
3527 ENUMX
3528 BFD_RELOC_SH_IMM_MEDHI16_PCREL
3529 ENUMX
3530 BFD_RELOC_SH_IMM_HI16
3531 ENUMX
3532 BFD_RELOC_SH_IMM_HI16_PCREL
3533 ENUMX
3534 BFD_RELOC_SH_PT_16
3535 ENUMX
3536 BFD_RELOC_SH_TLS_GD_32
3537 ENUMX
3538 BFD_RELOC_SH_TLS_LD_32
3539 ENUMX
3540 BFD_RELOC_SH_TLS_LDO_32
3541 ENUMX
3542 BFD_RELOC_SH_TLS_IE_32
3543 ENUMX
3544 BFD_RELOC_SH_TLS_LE_32
3545 ENUMX
3546 BFD_RELOC_SH_TLS_DTPMOD32
3547 ENUMX
3548 BFD_RELOC_SH_TLS_DTPOFF32
3549 ENUMX
3550 BFD_RELOC_SH_TLS_TPOFF32
3551 ENUMX
3552 BFD_RELOC_SH_GOT20
3553 ENUMX
3554 BFD_RELOC_SH_GOTOFF20
3555 ENUMX
3556 BFD_RELOC_SH_GOTFUNCDESC
3557 ENUMX
3558 BFD_RELOC_SH_GOTFUNCDESC20
3559 ENUMX
3560 BFD_RELOC_SH_GOTOFFFUNCDESC
3561 ENUMX
3562 BFD_RELOC_SH_GOTOFFFUNCDESC20
3563 ENUMX
3564 BFD_RELOC_SH_FUNCDESC
3565 ENUMDOC
3566 Renesas / SuperH SH relocs. Not all of these appear in object files.
3567
3568 ENUM
3569 BFD_RELOC_ARC_NONE
3570 ENUMX
3571 BFD_RELOC_ARC_8
3572 ENUMX
3573 BFD_RELOC_ARC_16
3574 ENUMX
3575 BFD_RELOC_ARC_24
3576 ENUMX
3577 BFD_RELOC_ARC_32
3578 ENUMX
3579 BFD_RELOC_ARC_N8
3580 ENUMX
3581 BFD_RELOC_ARC_N16
3582 ENUMX
3583 BFD_RELOC_ARC_N24
3584 ENUMX
3585 BFD_RELOC_ARC_N32
3586 ENUMX
3587 BFD_RELOC_ARC_SDA
3588 ENUMX
3589 BFD_RELOC_ARC_SECTOFF
3590 ENUMX
3591 BFD_RELOC_ARC_S21H_PCREL
3592 ENUMX
3593 BFD_RELOC_ARC_S21W_PCREL
3594 ENUMX
3595 BFD_RELOC_ARC_S25H_PCREL
3596 ENUMX
3597 BFD_RELOC_ARC_S25W_PCREL
3598 ENUMX
3599 BFD_RELOC_ARC_SDA32
3600 ENUMX
3601 BFD_RELOC_ARC_SDA_LDST
3602 ENUMX
3603 BFD_RELOC_ARC_SDA_LDST1
3604 ENUMX
3605 BFD_RELOC_ARC_SDA_LDST2
3606 ENUMX
3607 BFD_RELOC_ARC_SDA16_LD
3608 ENUMX
3609 BFD_RELOC_ARC_SDA16_LD1
3610 ENUMX
3611 BFD_RELOC_ARC_SDA16_LD2
3612 ENUMX
3613 BFD_RELOC_ARC_S13_PCREL
3614 ENUMX
3615 BFD_RELOC_ARC_W
3616 ENUMX
3617 BFD_RELOC_ARC_32_ME
3618 ENUMX
3619 BFD_RELOC_ARC_32_ME_S
3620 ENUMX
3621 BFD_RELOC_ARC_N32_ME
3622 ENUMX
3623 BFD_RELOC_ARC_SECTOFF_ME
3624 ENUMX
3625 BFD_RELOC_ARC_SDA32_ME
3626 ENUMX
3627 BFD_RELOC_ARC_W_ME
3628 ENUMX
3629 BFD_RELOC_AC_SECTOFF_U8
3630 ENUMX
3631 BFD_RELOC_AC_SECTOFF_U8_1
3632 ENUMX
3633 BFD_RELOC_AC_SECTOFF_U8_2
3634 ENUMX
3635 BFD_RELOC_AC_SECTOFF_S9
3636 ENUMX
3637 BFD_RELOC_AC_SECTOFF_S9_1
3638 ENUMX
3639 BFD_RELOC_AC_SECTOFF_S9_2
3640 ENUMX
3641 BFD_RELOC_ARC_SECTOFF_ME_1
3642 ENUMX
3643 BFD_RELOC_ARC_SECTOFF_ME_2
3644 ENUMX
3645 BFD_RELOC_ARC_SECTOFF_1
3646 ENUMX
3647 BFD_RELOC_ARC_SECTOFF_2
3648 ENUMX
3649 BFD_RELOC_ARC_SDA_12
3650 ENUMX
3651 BFD_RELOC_ARC_SDA16_ST2
3652 ENUMX
3653 BFD_RELOC_ARC_32_PCREL
3654 ENUMX
3655 BFD_RELOC_ARC_PC32
3656 ENUMX
3657 BFD_RELOC_ARC_GOT32
3658 ENUMX
3659 BFD_RELOC_ARC_GOTPC32
3660 ENUMX
3661 BFD_RELOC_ARC_PLT32
3662 ENUMX
3663 BFD_RELOC_ARC_COPY
3664 ENUMX
3665 BFD_RELOC_ARC_GLOB_DAT
3666 ENUMX
3667 BFD_RELOC_ARC_JMP_SLOT
3668 ENUMX
3669 BFD_RELOC_ARC_RELATIVE
3670 ENUMX
3671 BFD_RELOC_ARC_GOTOFF
3672 ENUMX
3673 BFD_RELOC_ARC_GOTPC
3674 ENUMX
3675 BFD_RELOC_ARC_S21W_PCREL_PLT
3676 ENUMX
3677 BFD_RELOC_ARC_S25H_PCREL_PLT
3678 ENUMX
3679 BFD_RELOC_ARC_TLS_DTPMOD
3680 ENUMX
3681 BFD_RELOC_ARC_TLS_TPOFF
3682 ENUMX
3683 BFD_RELOC_ARC_TLS_GD_GOT
3684 ENUMX
3685 BFD_RELOC_ARC_TLS_GD_LD
3686 ENUMX
3687 BFD_RELOC_ARC_TLS_GD_CALL
3688 ENUMX
3689 BFD_RELOC_ARC_TLS_IE_GOT
3690 ENUMX
3691 BFD_RELOC_ARC_TLS_DTPOFF
3692 ENUMX
3693 BFD_RELOC_ARC_TLS_DTPOFF_S9
3694 ENUMX
3695 BFD_RELOC_ARC_TLS_LE_S9
3696 ENUMX
3697 BFD_RELOC_ARC_TLS_LE_32
3698 ENUMX
3699 BFD_RELOC_ARC_S25W_PCREL_PLT
3700 ENUMX
3701 BFD_RELOC_ARC_S21H_PCREL_PLT
3702 ENUMX
3703 BFD_RELOC_ARC_NPS_CMEM16
3704 ENUMX
3705 BFD_RELOC_ARC_JLI_SECTOFF
3706 ENUMDOC
3707 ARC relocs.
3708
3709 ENUM
3710 BFD_RELOC_BFIN_16_IMM
3711 ENUMDOC
3712 ADI Blackfin 16 bit immediate absolute reloc.
3713 ENUM
3714 BFD_RELOC_BFIN_16_HIGH
3715 ENUMDOC
3716 ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3717 ENUM
3718 BFD_RELOC_BFIN_4_PCREL
3719 ENUMDOC
3720 ADI Blackfin 'a' part of LSETUP.
3721 ENUM
3722 BFD_RELOC_BFIN_5_PCREL
3723 ENUMDOC
3724 ADI Blackfin.
3725 ENUM
3726 BFD_RELOC_BFIN_16_LOW
3727 ENUMDOC
3728 ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3729 ENUM
3730 BFD_RELOC_BFIN_10_PCREL
3731 ENUMDOC
3732 ADI Blackfin.
3733 ENUM
3734 BFD_RELOC_BFIN_11_PCREL
3735 ENUMDOC
3736 ADI Blackfin 'b' part of LSETUP.
3737 ENUM
3738 BFD_RELOC_BFIN_12_PCREL_JUMP
3739 ENUMDOC
3740 ADI Blackfin.
3741 ENUM
3742 BFD_RELOC_BFIN_12_PCREL_JUMP_S
3743 ENUMDOC
3744 ADI Blackfin Short jump, pcrel.
3745 ENUM
3746 BFD_RELOC_BFIN_24_PCREL_CALL_X
3747 ENUMDOC
3748 ADI Blackfin Call.x not implemented.
3749 ENUM
3750 BFD_RELOC_BFIN_24_PCREL_JUMP_L
3751 ENUMDOC
3752 ADI Blackfin Long Jump pcrel.
3753 ENUM
3754 BFD_RELOC_BFIN_GOT17M4
3755 ENUMX
3756 BFD_RELOC_BFIN_GOTHI
3757 ENUMX
3758 BFD_RELOC_BFIN_GOTLO
3759 ENUMX
3760 BFD_RELOC_BFIN_FUNCDESC
3761 ENUMX
3762 BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3763 ENUMX
3764 BFD_RELOC_BFIN_FUNCDESC_GOTHI
3765 ENUMX
3766 BFD_RELOC_BFIN_FUNCDESC_GOTLO
3767 ENUMX
3768 BFD_RELOC_BFIN_FUNCDESC_VALUE
3769 ENUMX
3770 BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3771 ENUMX
3772 BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3773 ENUMX
3774 BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3775 ENUMX
3776 BFD_RELOC_BFIN_GOTOFF17M4
3777 ENUMX
3778 BFD_RELOC_BFIN_GOTOFFHI
3779 ENUMX
3780 BFD_RELOC_BFIN_GOTOFFLO
3781 ENUMDOC
3782 ADI Blackfin FD-PIC relocations.
3783 ENUM
3784 BFD_RELOC_BFIN_GOT
3785 ENUMDOC
3786 ADI Blackfin GOT relocation.
3787 ENUM
3788 BFD_RELOC_BFIN_PLTPC
3789 ENUMDOC
3790 ADI Blackfin PLTPC relocation.
3791 ENUM
3792 BFD_ARELOC_BFIN_PUSH
3793 ENUMDOC
3794 ADI Blackfin arithmetic relocation.
3795 ENUM
3796 BFD_ARELOC_BFIN_CONST
3797 ENUMDOC
3798 ADI Blackfin arithmetic relocation.
3799 ENUM
3800 BFD_ARELOC_BFIN_ADD
3801 ENUMDOC
3802 ADI Blackfin arithmetic relocation.
3803 ENUM
3804 BFD_ARELOC_BFIN_SUB
3805 ENUMDOC
3806 ADI Blackfin arithmetic relocation.
3807 ENUM
3808 BFD_ARELOC_BFIN_MULT
3809 ENUMDOC
3810 ADI Blackfin arithmetic relocation.
3811 ENUM
3812 BFD_ARELOC_BFIN_DIV
3813 ENUMDOC
3814 ADI Blackfin arithmetic relocation.
3815 ENUM
3816 BFD_ARELOC_BFIN_MOD
3817 ENUMDOC
3818 ADI Blackfin arithmetic relocation.
3819 ENUM
3820 BFD_ARELOC_BFIN_LSHIFT
3821 ENUMDOC
3822 ADI Blackfin arithmetic relocation.
3823 ENUM
3824 BFD_ARELOC_BFIN_RSHIFT
3825 ENUMDOC
3826 ADI Blackfin arithmetic relocation.
3827 ENUM
3828 BFD_ARELOC_BFIN_AND
3829 ENUMDOC
3830 ADI Blackfin arithmetic relocation.
3831 ENUM
3832 BFD_ARELOC_BFIN_OR
3833 ENUMDOC
3834 ADI Blackfin arithmetic relocation.
3835 ENUM
3836 BFD_ARELOC_BFIN_XOR
3837 ENUMDOC
3838 ADI Blackfin arithmetic relocation.
3839 ENUM
3840 BFD_ARELOC_BFIN_LAND
3841 ENUMDOC
3842 ADI Blackfin arithmetic relocation.
3843 ENUM
3844 BFD_ARELOC_BFIN_LOR
3845 ENUMDOC
3846 ADI Blackfin arithmetic relocation.
3847 ENUM
3848 BFD_ARELOC_BFIN_LEN
3849 ENUMDOC
3850 ADI Blackfin arithmetic relocation.
3851 ENUM
3852 BFD_ARELOC_BFIN_NEG
3853 ENUMDOC
3854 ADI Blackfin arithmetic relocation.
3855 ENUM
3856 BFD_ARELOC_BFIN_COMP
3857 ENUMDOC
3858 ADI Blackfin arithmetic relocation.
3859 ENUM
3860 BFD_ARELOC_BFIN_PAGE
3861 ENUMDOC
3862 ADI Blackfin arithmetic relocation.
3863 ENUM
3864 BFD_ARELOC_BFIN_HWPAGE
3865 ENUMDOC
3866 ADI Blackfin arithmetic relocation.
3867 ENUM
3868 BFD_ARELOC_BFIN_ADDR
3869 ENUMDOC
3870 ADI Blackfin arithmetic relocation.
3871
3872 ENUM
3873 BFD_RELOC_D10V_10_PCREL_R
3874 ENUMDOC
3875 Mitsubishi D10V relocs.
3876 This is a 10-bit reloc with the right 2 bits
3877 assumed to be 0.
3878 ENUM
3879 BFD_RELOC_D10V_10_PCREL_L
3880 ENUMDOC
3881 Mitsubishi D10V relocs.
3882 This is a 10-bit reloc with the right 2 bits
3883 assumed to be 0. This is the same as the previous reloc
3884 except it is in the left container, i.e.,
3885 shifted left 15 bits.
3886 ENUM
3887 BFD_RELOC_D10V_18
3888 ENUMDOC
3889 This is an 18-bit reloc with the right 2 bits
3890 assumed to be 0.
3891 ENUM
3892 BFD_RELOC_D10V_18_PCREL
3893 ENUMDOC
3894 This is an 18-bit reloc with the right 2 bits
3895 assumed to be 0.
3896
3897 ENUM
3898 BFD_RELOC_D30V_6
3899 ENUMDOC
3900 Mitsubishi D30V relocs.
3901 This is a 6-bit absolute reloc.
3902 ENUM
3903 BFD_RELOC_D30V_9_PCREL
3904 ENUMDOC
3905 This is a 6-bit pc-relative reloc with
3906 the right 3 bits assumed to be 0.
3907 ENUM
3908 BFD_RELOC_D30V_9_PCREL_R
3909 ENUMDOC
3910 This is a 6-bit pc-relative reloc with
3911 the right 3 bits assumed to be 0. Same
3912 as the previous reloc but on the right side
3913 of the container.
3914 ENUM
3915 BFD_RELOC_D30V_15
3916 ENUMDOC
3917 This is a 12-bit absolute reloc with the
3918 right 3 bitsassumed to be 0.
3919 ENUM
3920 BFD_RELOC_D30V_15_PCREL
3921 ENUMDOC
3922 This is a 12-bit pc-relative reloc with
3923 the right 3 bits assumed to be 0.
3924 ENUM
3925 BFD_RELOC_D30V_15_PCREL_R
3926 ENUMDOC
3927 This is a 12-bit pc-relative reloc with
3928 the right 3 bits assumed to be 0. Same
3929 as the previous reloc but on the right side
3930 of the container.
3931 ENUM
3932 BFD_RELOC_D30V_21
3933 ENUMDOC
3934 This is an 18-bit absolute reloc with
3935 the right 3 bits assumed to be 0.
3936 ENUM
3937 BFD_RELOC_D30V_21_PCREL
3938 ENUMDOC
3939 This is an 18-bit pc-relative reloc with
3940 the right 3 bits assumed to be 0.
3941 ENUM
3942 BFD_RELOC_D30V_21_PCREL_R
3943 ENUMDOC
3944 This is an 18-bit pc-relative reloc with
3945 the right 3 bits assumed to be 0. Same
3946 as the previous reloc but on the right side
3947 of the container.
3948 ENUM
3949 BFD_RELOC_D30V_32
3950 ENUMDOC
3951 This is a 32-bit absolute reloc.
3952 ENUM
3953 BFD_RELOC_D30V_32_PCREL
3954 ENUMDOC
3955 This is a 32-bit pc-relative reloc.
3956
3957 ENUM
3958 BFD_RELOC_DLX_HI16_S
3959 ENUMDOC
3960 DLX relocs
3961 ENUM
3962 BFD_RELOC_DLX_LO16
3963 ENUMDOC
3964 DLX relocs
3965 ENUM
3966 BFD_RELOC_DLX_JMP26
3967 ENUMDOC
3968 DLX relocs
3969
3970 ENUM
3971 BFD_RELOC_M32C_HI8
3972 ENUMX
3973 BFD_RELOC_M32C_RL_JUMP
3974 ENUMX
3975 BFD_RELOC_M32C_RL_1ADDR
3976 ENUMX
3977 BFD_RELOC_M32C_RL_2ADDR
3978 ENUMDOC
3979 Renesas M16C/M32C Relocations.
3980
3981 ENUM
3982 BFD_RELOC_M32R_24
3983 ENUMDOC
3984 Renesas M32R (formerly Mitsubishi M32R) relocs.
3985 This is a 24 bit absolute address.
3986 ENUM
3987 BFD_RELOC_M32R_10_PCREL
3988 ENUMDOC
3989 This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3990 ENUM
3991 BFD_RELOC_M32R_18_PCREL
3992 ENUMDOC
3993 This is an 18-bit reloc with the right 2 bits assumed to be 0.
3994 ENUM
3995 BFD_RELOC_M32R_26_PCREL
3996 ENUMDOC
3997 This is a 26-bit reloc with the right 2 bits assumed to be 0.
3998 ENUM
3999 BFD_RELOC_M32R_HI16_ULO
4000 ENUMDOC
4001 This is a 16-bit reloc containing the high 16 bits of an address
4002 used when the lower 16 bits are treated as unsigned.
4003 ENUM
4004 BFD_RELOC_M32R_HI16_SLO
4005 ENUMDOC
4006 This is a 16-bit reloc containing the high 16 bits of an address
4007 used when the lower 16 bits are treated as signed.
4008 ENUM
4009 BFD_RELOC_M32R_LO16
4010 ENUMDOC
4011 This is a 16-bit reloc containing the lower 16 bits of an address.
4012 ENUM
4013 BFD_RELOC_M32R_SDA16
4014 ENUMDOC
4015 This is a 16-bit reloc containing the small data area offset for use in
4016 add3, load, and store instructions.
4017 ENUM
4018 BFD_RELOC_M32R_GOT24
4019 ENUMX
4020 BFD_RELOC_M32R_26_PLTREL
4021 ENUMX
4022 BFD_RELOC_M32R_COPY
4023 ENUMX
4024 BFD_RELOC_M32R_GLOB_DAT
4025 ENUMX
4026 BFD_RELOC_M32R_JMP_SLOT
4027 ENUMX
4028 BFD_RELOC_M32R_RELATIVE
4029 ENUMX
4030 BFD_RELOC_M32R_GOTOFF
4031 ENUMX
4032 BFD_RELOC_M32R_GOTOFF_HI_ULO
4033 ENUMX
4034 BFD_RELOC_M32R_GOTOFF_HI_SLO
4035 ENUMX
4036 BFD_RELOC_M32R_GOTOFF_LO
4037 ENUMX
4038 BFD_RELOC_M32R_GOTPC24
4039 ENUMX
4040 BFD_RELOC_M32R_GOT16_HI_ULO
4041 ENUMX
4042 BFD_RELOC_M32R_GOT16_HI_SLO
4043 ENUMX
4044 BFD_RELOC_M32R_GOT16_LO
4045 ENUMX
4046 BFD_RELOC_M32R_GOTPC_HI_ULO
4047 ENUMX
4048 BFD_RELOC_M32R_GOTPC_HI_SLO
4049 ENUMX
4050 BFD_RELOC_M32R_GOTPC_LO
4051 ENUMDOC
4052 For PIC.
4053
4054
4055 ENUM
4056 BFD_RELOC_NDS32_20
4057 ENUMDOC
4058 NDS32 relocs.
4059 This is a 20 bit absolute address.
4060 ENUM
4061 BFD_RELOC_NDS32_9_PCREL
4062 ENUMDOC
4063 This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4064 ENUM
4065 BFD_RELOC_NDS32_WORD_9_PCREL
4066 ENUMDOC
4067 This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4068 ENUM
4069 BFD_RELOC_NDS32_15_PCREL
4070 ENUMDOC
4071 This is an 15-bit reloc with the right 1 bit assumed to be 0.
4072 ENUM
4073 BFD_RELOC_NDS32_17_PCREL
4074 ENUMDOC
4075 This is an 17-bit reloc with the right 1 bit assumed to be 0.
4076 ENUM
4077 BFD_RELOC_NDS32_25_PCREL
4078 ENUMDOC
4079 This is a 25-bit reloc with the right 1 bit assumed to be 0.
4080 ENUM
4081 BFD_RELOC_NDS32_HI20
4082 ENUMDOC
4083 This is a 20-bit reloc containing the high 20 bits of an address
4084 used with the lower 12 bits
4085 ENUM
4086 BFD_RELOC_NDS32_LO12S3
4087 ENUMDOC
4088 This is a 12-bit reloc containing the lower 12 bits of an address
4089 then shift right by 3. This is used with ldi,sdi...
4090 ENUM
4091 BFD_RELOC_NDS32_LO12S2
4092 ENUMDOC
4093 This is a 12-bit reloc containing the lower 12 bits of an address
4094 then shift left by 2. This is used with lwi,swi...
4095 ENUM
4096 BFD_RELOC_NDS32_LO12S1
4097 ENUMDOC
4098 This is a 12-bit reloc containing the lower 12 bits of an address
4099 then shift left by 1. This is used with lhi,shi...
4100 ENUM
4101 BFD_RELOC_NDS32_LO12S0
4102 ENUMDOC
4103 This is a 12-bit reloc containing the lower 12 bits of an address
4104 then shift left by 0. This is used with lbisbi...
4105 ENUM
4106 BFD_RELOC_NDS32_LO12S0_ORI
4107 ENUMDOC
4108 This is a 12-bit reloc containing the lower 12 bits of an address
4109 then shift left by 0. This is only used with branch relaxations
4110 ENUM
4111 BFD_RELOC_NDS32_SDA15S3
4112 ENUMDOC
4113 This is a 15-bit reloc containing the small data area 18-bit signed offset
4114 and shift left by 3 for use in ldi, sdi...
4115 ENUM
4116 BFD_RELOC_NDS32_SDA15S2
4117 ENUMDOC
4118 This is a 15-bit reloc containing the small data area 17-bit signed offset
4119 and shift left by 2 for use in lwi, swi...
4120 ENUM
4121 BFD_RELOC_NDS32_SDA15S1
4122 ENUMDOC
4123 This is a 15-bit reloc containing the small data area 16-bit signed offset
4124 and shift left by 1 for use in lhi, shi...
4125 ENUM
4126 BFD_RELOC_NDS32_SDA15S0
4127 ENUMDOC
4128 This is a 15-bit reloc containing the small data area 15-bit signed offset
4129 and shift left by 0 for use in lbi, sbi...
4130 ENUM
4131 BFD_RELOC_NDS32_SDA16S3
4132 ENUMDOC
4133 This is a 16-bit reloc containing the small data area 16-bit signed offset
4134 and shift left by 3
4135 ENUM
4136 BFD_RELOC_NDS32_SDA17S2
4137 ENUMDOC
4138 This is a 17-bit reloc containing the small data area 17-bit signed offset
4139 and shift left by 2 for use in lwi.gp, swi.gp...
4140 ENUM
4141 BFD_RELOC_NDS32_SDA18S1
4142 ENUMDOC
4143 This is a 18-bit reloc containing the small data area 18-bit signed offset
4144 and shift left by 1 for use in lhi.gp, shi.gp...
4145 ENUM
4146 BFD_RELOC_NDS32_SDA19S0
4147 ENUMDOC
4148 This is a 19-bit reloc containing the small data area 19-bit signed offset
4149 and shift left by 0 for use in lbi.gp, sbi.gp...
4150 ENUM
4151 BFD_RELOC_NDS32_GOT20
4152 ENUMX
4153 BFD_RELOC_NDS32_9_PLTREL
4154 ENUMX
4155 BFD_RELOC_NDS32_25_PLTREL
4156 ENUMX
4157 BFD_RELOC_NDS32_COPY
4158 ENUMX
4159 BFD_RELOC_NDS32_GLOB_DAT
4160 ENUMX
4161 BFD_RELOC_NDS32_JMP_SLOT
4162 ENUMX
4163 BFD_RELOC_NDS32_RELATIVE
4164 ENUMX
4165 BFD_RELOC_NDS32_GOTOFF
4166 ENUMX
4167 BFD_RELOC_NDS32_GOTOFF_HI20
4168 ENUMX
4169 BFD_RELOC_NDS32_GOTOFF_LO12
4170 ENUMX
4171 BFD_RELOC_NDS32_GOTPC20
4172 ENUMX
4173 BFD_RELOC_NDS32_GOT_HI20
4174 ENUMX
4175 BFD_RELOC_NDS32_GOT_LO12
4176 ENUMX
4177 BFD_RELOC_NDS32_GOTPC_HI20
4178 ENUMX
4179 BFD_RELOC_NDS32_GOTPC_LO12
4180 ENUMDOC
4181 for PIC
4182 ENUM
4183 BFD_RELOC_NDS32_INSN16
4184 ENUMX
4185 BFD_RELOC_NDS32_LABEL
4186 ENUMX
4187 BFD_RELOC_NDS32_LONGCALL1
4188 ENUMX
4189 BFD_RELOC_NDS32_LONGCALL2
4190 ENUMX
4191 BFD_RELOC_NDS32_LONGCALL3
4192 ENUMX
4193 BFD_RELOC_NDS32_LONGJUMP1
4194 ENUMX
4195 BFD_RELOC_NDS32_LONGJUMP2
4196 ENUMX
4197 BFD_RELOC_NDS32_LONGJUMP3
4198 ENUMX
4199 BFD_RELOC_NDS32_LOADSTORE
4200 ENUMX
4201 BFD_RELOC_NDS32_9_FIXED
4202 ENUMX
4203 BFD_RELOC_NDS32_15_FIXED
4204 ENUMX
4205 BFD_RELOC_NDS32_17_FIXED
4206 ENUMX
4207 BFD_RELOC_NDS32_25_FIXED
4208 ENUMX
4209 BFD_RELOC_NDS32_LONGCALL4
4210 ENUMX
4211 BFD_RELOC_NDS32_LONGCALL5
4212 ENUMX
4213 BFD_RELOC_NDS32_LONGCALL6
4214 ENUMX
4215 BFD_RELOC_NDS32_LONGJUMP4
4216 ENUMX
4217 BFD_RELOC_NDS32_LONGJUMP5
4218 ENUMX
4219 BFD_RELOC_NDS32_LONGJUMP6
4220 ENUMX
4221 BFD_RELOC_NDS32_LONGJUMP7
4222 ENUMDOC
4223 for relax
4224 ENUM
4225 BFD_RELOC_NDS32_PLTREL_HI20
4226 ENUMX
4227 BFD_RELOC_NDS32_PLTREL_LO12
4228 ENUMX
4229 BFD_RELOC_NDS32_PLT_GOTREL_HI20
4230 ENUMX
4231 BFD_RELOC_NDS32_PLT_GOTREL_LO12
4232 ENUMDOC
4233 for PIC
4234 ENUM
4235 BFD_RELOC_NDS32_SDA12S2_DP
4236 ENUMX
4237 BFD_RELOC_NDS32_SDA12S2_SP
4238 ENUMX
4239 BFD_RELOC_NDS32_LO12S2_DP
4240 ENUMX
4241 BFD_RELOC_NDS32_LO12S2_SP
4242 ENUMDOC
4243 for floating point
4244 ENUM
4245 BFD_RELOC_NDS32_DWARF2_OP1
4246 ENUMX
4247 BFD_RELOC_NDS32_DWARF2_OP2
4248 ENUMX
4249 BFD_RELOC_NDS32_DWARF2_LEB
4250 ENUMDOC
4251 for dwarf2 debug_line.
4252 ENUM
4253 BFD_RELOC_NDS32_UPDATE_TA
4254 ENUMDOC
4255 for eliminate 16-bit instructions
4256 ENUM
4257 BFD_RELOC_NDS32_PLT_GOTREL_LO20
4258 ENUMX
4259 BFD_RELOC_NDS32_PLT_GOTREL_LO15
4260 ENUMX
4261 BFD_RELOC_NDS32_PLT_GOTREL_LO19
4262 ENUMX
4263 BFD_RELOC_NDS32_GOT_LO15
4264 ENUMX
4265 BFD_RELOC_NDS32_GOT_LO19
4266 ENUMX
4267 BFD_RELOC_NDS32_GOTOFF_LO15
4268 ENUMX
4269 BFD_RELOC_NDS32_GOTOFF_LO19
4270 ENUMX
4271 BFD_RELOC_NDS32_GOT15S2
4272 ENUMX
4273 BFD_RELOC_NDS32_GOT17S2
4274 ENUMDOC
4275 for PIC object relaxation
4276 ENUM
4277 BFD_RELOC_NDS32_5
4278 ENUMDOC
4279 NDS32 relocs.
4280 This is a 5 bit absolute address.
4281 ENUM
4282 BFD_RELOC_NDS32_10_UPCREL
4283 ENUMDOC
4284 This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4285 ENUM
4286 BFD_RELOC_NDS32_SDA_FP7U2_RELA
4287 ENUMDOC
4288 If fp were omitted, fp can used as another gp.
4289 ENUM
4290 BFD_RELOC_NDS32_RELAX_ENTRY
4291 ENUMX
4292 BFD_RELOC_NDS32_GOT_SUFF
4293 ENUMX
4294 BFD_RELOC_NDS32_GOTOFF_SUFF
4295 ENUMX
4296 BFD_RELOC_NDS32_PLT_GOT_SUFF
4297 ENUMX
4298 BFD_RELOC_NDS32_MULCALL_SUFF
4299 ENUMX
4300 BFD_RELOC_NDS32_PTR
4301 ENUMX
4302 BFD_RELOC_NDS32_PTR_COUNT
4303 ENUMX
4304 BFD_RELOC_NDS32_PTR_RESOLVED
4305 ENUMX
4306 BFD_RELOC_NDS32_PLTBLOCK
4307 ENUMX
4308 BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4309 ENUMX
4310 BFD_RELOC_NDS32_RELAX_REGION_END
4311 ENUMX
4312 BFD_RELOC_NDS32_MINUEND
4313 ENUMX
4314 BFD_RELOC_NDS32_SUBTRAHEND
4315 ENUMX
4316 BFD_RELOC_NDS32_DIFF8
4317 ENUMX
4318 BFD_RELOC_NDS32_DIFF16
4319 ENUMX
4320 BFD_RELOC_NDS32_DIFF32
4321 ENUMX
4322 BFD_RELOC_NDS32_DIFF_ULEB128
4323 ENUMX
4324 BFD_RELOC_NDS32_EMPTY
4325 ENUMDOC
4326 relaxation relative relocation types
4327 ENUM
4328 BFD_RELOC_NDS32_25_ABS
4329 ENUMDOC
4330 This is a 25 bit absolute address.
4331 ENUM
4332 BFD_RELOC_NDS32_DATA
4333 ENUMX
4334 BFD_RELOC_NDS32_TRAN
4335 ENUMX
4336 BFD_RELOC_NDS32_17IFC_PCREL
4337 ENUMX
4338 BFD_RELOC_NDS32_10IFCU_PCREL
4339 ENUMDOC
4340 For ex9 and ifc using.
4341 ENUM
4342 BFD_RELOC_NDS32_TPOFF
4343 ENUMX
4344 BFD_RELOC_NDS32_GOTTPOFF
4345 ENUMX
4346 BFD_RELOC_NDS32_TLS_LE_HI20
4347 ENUMX
4348 BFD_RELOC_NDS32_TLS_LE_LO12
4349 ENUMX
4350 BFD_RELOC_NDS32_TLS_LE_20
4351 ENUMX
4352 BFD_RELOC_NDS32_TLS_LE_15S0
4353 ENUMX
4354 BFD_RELOC_NDS32_TLS_LE_15S1
4355 ENUMX
4356 BFD_RELOC_NDS32_TLS_LE_15S2
4357 ENUMX
4358 BFD_RELOC_NDS32_TLS_LE_ADD
4359 ENUMX
4360 BFD_RELOC_NDS32_TLS_LE_LS
4361 ENUMX
4362 BFD_RELOC_NDS32_TLS_IE_HI20
4363 ENUMX
4364 BFD_RELOC_NDS32_TLS_IE_LO12
4365 ENUMX
4366 BFD_RELOC_NDS32_TLS_IE_LO12S2
4367 ENUMX
4368 BFD_RELOC_NDS32_TLS_IEGP_HI20
4369 ENUMX
4370 BFD_RELOC_NDS32_TLS_IEGP_LO12
4371 ENUMX
4372 BFD_RELOC_NDS32_TLS_IEGP_LO12S2
4373 ENUMX
4374 BFD_RELOC_NDS32_TLS_IEGP_LW
4375 ENUMX
4376 BFD_RELOC_NDS32_TLS_DESC
4377 ENUMX
4378 BFD_RELOC_NDS32_TLS_DESC_HI20
4379 ENUMX
4380 BFD_RELOC_NDS32_TLS_DESC_LO12
4381 ENUMX
4382 BFD_RELOC_NDS32_TLS_DESC_20
4383 ENUMX
4384 BFD_RELOC_NDS32_TLS_DESC_SDA17S2
4385 ENUMX
4386 BFD_RELOC_NDS32_TLS_DESC_ADD
4387 ENUMX
4388 BFD_RELOC_NDS32_TLS_DESC_FUNC
4389 ENUMX
4390 BFD_RELOC_NDS32_TLS_DESC_CALL
4391 ENUMX
4392 BFD_RELOC_NDS32_TLS_DESC_MEM
4393 ENUMX
4394 BFD_RELOC_NDS32_REMOVE
4395 ENUMX
4396 BFD_RELOC_NDS32_GROUP
4397 ENUMDOC
4398 For TLS.
4399 ENUM
4400 BFD_RELOC_NDS32_LSI
4401 ENUMDOC
4402 For floating load store relaxation.
4403
4404
4405 ENUM
4406 BFD_RELOC_V850_9_PCREL
4407 ENUMDOC
4408 This is a 9-bit reloc
4409 ENUM
4410 BFD_RELOC_V850_22_PCREL
4411 ENUMDOC
4412 This is a 22-bit reloc
4413
4414 ENUM
4415 BFD_RELOC_V850_SDA_16_16_OFFSET
4416 ENUMDOC
4417 This is a 16 bit offset from the short data area pointer.
4418 ENUM
4419 BFD_RELOC_V850_SDA_15_16_OFFSET
4420 ENUMDOC
4421 This is a 16 bit offset (of which only 15 bits are used) from the
4422 short data area pointer.
4423 ENUM
4424 BFD_RELOC_V850_ZDA_16_16_OFFSET
4425 ENUMDOC
4426 This is a 16 bit offset from the zero data area pointer.
4427 ENUM
4428 BFD_RELOC_V850_ZDA_15_16_OFFSET
4429 ENUMDOC
4430 This is a 16 bit offset (of which only 15 bits are used) from the
4431 zero data area pointer.
4432 ENUM
4433 BFD_RELOC_V850_TDA_6_8_OFFSET
4434 ENUMDOC
4435 This is an 8 bit offset (of which only 6 bits are used) from the
4436 tiny data area pointer.
4437 ENUM
4438 BFD_RELOC_V850_TDA_7_8_OFFSET
4439 ENUMDOC
4440 This is an 8bit offset (of which only 7 bits are used) from the tiny
4441 data area pointer.
4442 ENUM
4443 BFD_RELOC_V850_TDA_7_7_OFFSET
4444 ENUMDOC
4445 This is a 7 bit offset from the tiny data area pointer.
4446 ENUM
4447 BFD_RELOC_V850_TDA_16_16_OFFSET
4448 ENUMDOC
4449 This is a 16 bit offset from the tiny data area pointer.
4450 COMMENT
4451 ENUM
4452 BFD_RELOC_V850_TDA_4_5_OFFSET
4453 ENUMDOC
4454 This is a 5 bit offset (of which only 4 bits are used) from the tiny
4455 data area pointer.
4456 ENUM
4457 BFD_RELOC_V850_TDA_4_4_OFFSET
4458 ENUMDOC
4459 This is a 4 bit offset from the tiny data area pointer.
4460 ENUM
4461 BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4462 ENUMDOC
4463 This is a 16 bit offset from the short data area pointer, with the
4464 bits placed non-contiguously in the instruction.
4465 ENUM
4466 BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4467 ENUMDOC
4468 This is a 16 bit offset from the zero data area pointer, with the
4469 bits placed non-contiguously in the instruction.
4470 ENUM
4471 BFD_RELOC_V850_CALLT_6_7_OFFSET
4472 ENUMDOC
4473 This is a 6 bit offset from the call table base pointer.
4474 ENUM
4475 BFD_RELOC_V850_CALLT_16_16_OFFSET
4476 ENUMDOC
4477 This is a 16 bit offset from the call table base pointer.
4478 ENUM
4479 BFD_RELOC_V850_LONGCALL
4480 ENUMDOC
4481 Used for relaxing indirect function calls.
4482 ENUM
4483 BFD_RELOC_V850_LONGJUMP
4484 ENUMDOC
4485 Used for relaxing indirect jumps.
4486 ENUM
4487 BFD_RELOC_V850_ALIGN
4488 ENUMDOC
4489 Used to maintain alignment whilst relaxing.
4490 ENUM
4491 BFD_RELOC_V850_LO16_SPLIT_OFFSET
4492 ENUMDOC
4493 This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4494 instructions.
4495 ENUM
4496 BFD_RELOC_V850_16_PCREL
4497 ENUMDOC
4498 This is a 16-bit reloc.
4499 ENUM
4500 BFD_RELOC_V850_17_PCREL
4501 ENUMDOC
4502 This is a 17-bit reloc.
4503 ENUM
4504 BFD_RELOC_V850_23
4505 ENUMDOC
4506 This is a 23-bit reloc.
4507 ENUM
4508 BFD_RELOC_V850_32_PCREL
4509 ENUMDOC
4510 This is a 32-bit reloc.
4511 ENUM
4512 BFD_RELOC_V850_32_ABS
4513 ENUMDOC
4514 This is a 32-bit reloc.
4515 ENUM
4516 BFD_RELOC_V850_16_SPLIT_OFFSET
4517 ENUMDOC
4518 This is a 16-bit reloc.
4519 ENUM
4520 BFD_RELOC_V850_16_S1
4521 ENUMDOC
4522 This is a 16-bit reloc.
4523 ENUM
4524 BFD_RELOC_V850_LO16_S1
4525 ENUMDOC
4526 Low 16 bits. 16 bit shifted by 1.
4527 ENUM
4528 BFD_RELOC_V850_CALLT_15_16_OFFSET
4529 ENUMDOC
4530 This is a 16 bit offset from the call table base pointer.
4531 ENUM
4532 BFD_RELOC_V850_32_GOTPCREL
4533 ENUMDOC
4534 DSO relocations.
4535 ENUM
4536 BFD_RELOC_V850_16_GOT
4537 ENUMDOC
4538 DSO relocations.
4539 ENUM
4540 BFD_RELOC_V850_32_GOT
4541 ENUMDOC
4542 DSO relocations.
4543 ENUM
4544 BFD_RELOC_V850_22_PLT_PCREL
4545 ENUMDOC
4546 DSO relocations.
4547 ENUM
4548 BFD_RELOC_V850_32_PLT_PCREL
4549 ENUMDOC
4550 DSO relocations.
4551 ENUM
4552 BFD_RELOC_V850_COPY
4553 ENUMDOC
4554 DSO relocations.
4555 ENUM
4556 BFD_RELOC_V850_GLOB_DAT
4557 ENUMDOC
4558 DSO relocations.
4559 ENUM
4560 BFD_RELOC_V850_JMP_SLOT
4561 ENUMDOC
4562 DSO relocations.
4563 ENUM
4564 BFD_RELOC_V850_RELATIVE
4565 ENUMDOC
4566 DSO relocations.
4567 ENUM
4568 BFD_RELOC_V850_16_GOTOFF
4569 ENUMDOC
4570 DSO relocations.
4571 ENUM
4572 BFD_RELOC_V850_32_GOTOFF
4573 ENUMDOC
4574 DSO relocations.
4575 ENUM
4576 BFD_RELOC_V850_CODE
4577 ENUMDOC
4578 start code.
4579 ENUM
4580 BFD_RELOC_V850_DATA
4581 ENUMDOC
4582 start data in text.
4583
4584 ENUM
4585 BFD_RELOC_TIC30_LDP
4586 ENUMDOC
4587 This is a 8bit DP reloc for the tms320c30, where the most
4588 significant 8 bits of a 24 bit word are placed into the least
4589 significant 8 bits of the opcode.
4590
4591 ENUM
4592 BFD_RELOC_TIC54X_PARTLS7
4593 ENUMDOC
4594 This is a 7bit reloc for the tms320c54x, where the least
4595 significant 7 bits of a 16 bit word are placed into the least
4596 significant 7 bits of the opcode.
4597
4598 ENUM
4599 BFD_RELOC_TIC54X_PARTMS9
4600 ENUMDOC
4601 This is a 9bit DP reloc for the tms320c54x, where the most
4602 significant 9 bits of a 16 bit word are placed into the least
4603 significant 9 bits of the opcode.
4604
4605 ENUM
4606 BFD_RELOC_TIC54X_23
4607 ENUMDOC
4608 This is an extended address 23-bit reloc for the tms320c54x.
4609
4610 ENUM
4611 BFD_RELOC_TIC54X_16_OF_23
4612 ENUMDOC
4613 This is a 16-bit reloc for the tms320c54x, where the least
4614 significant 16 bits of a 23-bit extended address are placed into
4615 the opcode.
4616
4617 ENUM
4618 BFD_RELOC_TIC54X_MS7_OF_23
4619 ENUMDOC
4620 This is a reloc for the tms320c54x, where the most
4621 significant 7 bits of a 23-bit extended address are placed into
4622 the opcode.
4623
4624 ENUM
4625 BFD_RELOC_C6000_PCR_S21
4626 ENUMX
4627 BFD_RELOC_C6000_PCR_S12
4628 ENUMX
4629 BFD_RELOC_C6000_PCR_S10
4630 ENUMX
4631 BFD_RELOC_C6000_PCR_S7
4632 ENUMX
4633 BFD_RELOC_C6000_ABS_S16
4634 ENUMX
4635 BFD_RELOC_C6000_ABS_L16
4636 ENUMX
4637 BFD_RELOC_C6000_ABS_H16
4638 ENUMX
4639 BFD_RELOC_C6000_SBR_U15_B
4640 ENUMX
4641 BFD_RELOC_C6000_SBR_U15_H
4642 ENUMX
4643 BFD_RELOC_C6000_SBR_U15_W
4644 ENUMX
4645 BFD_RELOC_C6000_SBR_S16
4646 ENUMX
4647 BFD_RELOC_C6000_SBR_L16_B
4648 ENUMX
4649 BFD_RELOC_C6000_SBR_L16_H
4650 ENUMX
4651 BFD_RELOC_C6000_SBR_L16_W
4652 ENUMX
4653 BFD_RELOC_C6000_SBR_H16_B
4654 ENUMX
4655 BFD_RELOC_C6000_SBR_H16_H
4656 ENUMX
4657 BFD_RELOC_C6000_SBR_H16_W
4658 ENUMX
4659 BFD_RELOC_C6000_SBR_GOT_U15_W
4660 ENUMX
4661 BFD_RELOC_C6000_SBR_GOT_L16_W
4662 ENUMX
4663 BFD_RELOC_C6000_SBR_GOT_H16_W
4664 ENUMX
4665 BFD_RELOC_C6000_DSBT_INDEX
4666 ENUMX
4667 BFD_RELOC_C6000_PREL31
4668 ENUMX
4669 BFD_RELOC_C6000_COPY
4670 ENUMX
4671 BFD_RELOC_C6000_JUMP_SLOT
4672 ENUMX
4673 BFD_RELOC_C6000_EHTYPE
4674 ENUMX
4675 BFD_RELOC_C6000_PCR_H16
4676 ENUMX
4677 BFD_RELOC_C6000_PCR_L16
4678 ENUMX
4679 BFD_RELOC_C6000_ALIGN
4680 ENUMX
4681 BFD_RELOC_C6000_FPHEAD
4682 ENUMX
4683 BFD_RELOC_C6000_NOCMP
4684 ENUMDOC
4685 TMS320C6000 relocations.
4686
4687 ENUM
4688 BFD_RELOC_FR30_48
4689 ENUMDOC
4690 This is a 48 bit reloc for the FR30 that stores 32 bits.
4691 ENUM
4692 BFD_RELOC_FR30_20
4693 ENUMDOC
4694 This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4695 two sections.
4696 ENUM
4697 BFD_RELOC_FR30_6_IN_4
4698 ENUMDOC
4699 This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4700 4 bits.
4701 ENUM
4702 BFD_RELOC_FR30_8_IN_8
4703 ENUMDOC
4704 This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4705 into 8 bits.
4706 ENUM
4707 BFD_RELOC_FR30_9_IN_8
4708 ENUMDOC
4709 This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4710 into 8 bits.
4711 ENUM
4712 BFD_RELOC_FR30_10_IN_8
4713 ENUMDOC
4714 This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4715 into 8 bits.
4716 ENUM
4717 BFD_RELOC_FR30_9_PCREL
4718 ENUMDOC
4719 This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4720 short offset into 8 bits.
4721 ENUM
4722 BFD_RELOC_FR30_12_PCREL
4723 ENUMDOC
4724 This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4725 short offset into 11 bits.
4726
4727 ENUM
4728 BFD_RELOC_MCORE_PCREL_IMM8BY4
4729 ENUMX
4730 BFD_RELOC_MCORE_PCREL_IMM11BY2
4731 ENUMX
4732 BFD_RELOC_MCORE_PCREL_IMM4BY2
4733 ENUMX
4734 BFD_RELOC_MCORE_PCREL_32
4735 ENUMX
4736 BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4737 ENUMX
4738 BFD_RELOC_MCORE_RVA
4739 ENUMDOC
4740 Motorola Mcore relocations.
4741
4742 ENUM
4743 BFD_RELOC_MEP_8
4744 ENUMX
4745 BFD_RELOC_MEP_16
4746 ENUMX
4747 BFD_RELOC_MEP_32
4748 ENUMX
4749 BFD_RELOC_MEP_PCREL8A2
4750 ENUMX
4751 BFD_RELOC_MEP_PCREL12A2
4752 ENUMX
4753 BFD_RELOC_MEP_PCREL17A2
4754 ENUMX
4755 BFD_RELOC_MEP_PCREL24A2
4756 ENUMX
4757 BFD_RELOC_MEP_PCABS24A2
4758 ENUMX
4759 BFD_RELOC_MEP_LOW16
4760 ENUMX
4761 BFD_RELOC_MEP_HI16U
4762 ENUMX
4763 BFD_RELOC_MEP_HI16S
4764 ENUMX
4765 BFD_RELOC_MEP_GPREL
4766 ENUMX
4767 BFD_RELOC_MEP_TPREL
4768 ENUMX
4769 BFD_RELOC_MEP_TPREL7
4770 ENUMX
4771 BFD_RELOC_MEP_TPREL7A2
4772 ENUMX
4773 BFD_RELOC_MEP_TPREL7A4
4774 ENUMX
4775 BFD_RELOC_MEP_UIMM24
4776 ENUMX
4777 BFD_RELOC_MEP_ADDR24A4
4778 ENUMX
4779 BFD_RELOC_MEP_GNU_VTINHERIT
4780 ENUMX
4781 BFD_RELOC_MEP_GNU_VTENTRY
4782 ENUMDOC
4783 Toshiba Media Processor Relocations.
4784 COMMENT
4785
4786 ENUM
4787 BFD_RELOC_METAG_HIADDR16
4788 ENUMX
4789 BFD_RELOC_METAG_LOADDR16
4790 ENUMX
4791 BFD_RELOC_METAG_RELBRANCH
4792 ENUMX
4793 BFD_RELOC_METAG_GETSETOFF
4794 ENUMX
4795 BFD_RELOC_METAG_HIOG
4796 ENUMX
4797 BFD_RELOC_METAG_LOOG
4798 ENUMX
4799 BFD_RELOC_METAG_REL8
4800 ENUMX
4801 BFD_RELOC_METAG_REL16
4802 ENUMX
4803 BFD_RELOC_METAG_HI16_GOTOFF
4804 ENUMX
4805 BFD_RELOC_METAG_LO16_GOTOFF
4806 ENUMX
4807 BFD_RELOC_METAG_GETSET_GOTOFF
4808 ENUMX
4809 BFD_RELOC_METAG_GETSET_GOT
4810 ENUMX
4811 BFD_RELOC_METAG_HI16_GOTPC
4812 ENUMX
4813 BFD_RELOC_METAG_LO16_GOTPC
4814 ENUMX
4815 BFD_RELOC_METAG_HI16_PLT
4816 ENUMX
4817 BFD_RELOC_METAG_LO16_PLT
4818 ENUMX
4819 BFD_RELOC_METAG_RELBRANCH_PLT
4820 ENUMX
4821 BFD_RELOC_METAG_GOTOFF
4822 ENUMX
4823 BFD_RELOC_METAG_PLT
4824 ENUMX
4825 BFD_RELOC_METAG_COPY
4826 ENUMX
4827 BFD_RELOC_METAG_JMP_SLOT
4828 ENUMX
4829 BFD_RELOC_METAG_RELATIVE
4830 ENUMX
4831 BFD_RELOC_METAG_GLOB_DAT
4832 ENUMX
4833 BFD_RELOC_METAG_TLS_GD
4834 ENUMX
4835 BFD_RELOC_METAG_TLS_LDM
4836 ENUMX
4837 BFD_RELOC_METAG_TLS_LDO_HI16
4838 ENUMX
4839 BFD_RELOC_METAG_TLS_LDO_LO16
4840 ENUMX
4841 BFD_RELOC_METAG_TLS_LDO
4842 ENUMX
4843 BFD_RELOC_METAG_TLS_IE
4844 ENUMX
4845 BFD_RELOC_METAG_TLS_IENONPIC
4846 ENUMX
4847 BFD_RELOC_METAG_TLS_IENONPIC_HI16
4848 ENUMX
4849 BFD_RELOC_METAG_TLS_IENONPIC_LO16
4850 ENUMX
4851 BFD_RELOC_METAG_TLS_TPOFF
4852 ENUMX
4853 BFD_RELOC_METAG_TLS_DTPMOD
4854 ENUMX
4855 BFD_RELOC_METAG_TLS_DTPOFF
4856 ENUMX
4857 BFD_RELOC_METAG_TLS_LE
4858 ENUMX
4859 BFD_RELOC_METAG_TLS_LE_HI16
4860 ENUMX
4861 BFD_RELOC_METAG_TLS_LE_LO16
4862 ENUMDOC
4863 Imagination Technologies Meta relocations.
4864
4865 ENUM
4866 BFD_RELOC_MMIX_GETA
4867 ENUMX
4868 BFD_RELOC_MMIX_GETA_1
4869 ENUMX
4870 BFD_RELOC_MMIX_GETA_2
4871 ENUMX
4872 BFD_RELOC_MMIX_GETA_3
4873 ENUMDOC
4874 These are relocations for the GETA instruction.
4875 ENUM
4876 BFD_RELOC_MMIX_CBRANCH
4877 ENUMX
4878 BFD_RELOC_MMIX_CBRANCH_J
4879 ENUMX
4880 BFD_RELOC_MMIX_CBRANCH_1
4881 ENUMX
4882 BFD_RELOC_MMIX_CBRANCH_2
4883 ENUMX
4884 BFD_RELOC_MMIX_CBRANCH_3
4885 ENUMDOC
4886 These are relocations for a conditional branch instruction.
4887 ENUM
4888 BFD_RELOC_MMIX_PUSHJ
4889 ENUMX
4890 BFD_RELOC_MMIX_PUSHJ_1
4891 ENUMX
4892 BFD_RELOC_MMIX_PUSHJ_2
4893 ENUMX
4894 BFD_RELOC_MMIX_PUSHJ_3
4895 ENUMX
4896 BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4897 ENUMDOC
4898 These are relocations for the PUSHJ instruction.
4899 ENUM
4900 BFD_RELOC_MMIX_JMP
4901 ENUMX
4902 BFD_RELOC_MMIX_JMP_1
4903 ENUMX
4904 BFD_RELOC_MMIX_JMP_2
4905 ENUMX
4906 BFD_RELOC_MMIX_JMP_3
4907 ENUMDOC
4908 These are relocations for the JMP instruction.
4909 ENUM
4910 BFD_RELOC_MMIX_ADDR19
4911 ENUMDOC
4912 This is a relocation for a relative address as in a GETA instruction or
4913 a branch.
4914 ENUM
4915 BFD_RELOC_MMIX_ADDR27
4916 ENUMDOC
4917 This is a relocation for a relative address as in a JMP instruction.
4918 ENUM
4919 BFD_RELOC_MMIX_REG_OR_BYTE
4920 ENUMDOC
4921 This is a relocation for an instruction field that may be a general
4922 register or a value 0..255.
4923 ENUM
4924 BFD_RELOC_MMIX_REG
4925 ENUMDOC
4926 This is a relocation for an instruction field that may be a general
4927 register.
4928 ENUM
4929 BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4930 ENUMDOC
4931 This is a relocation for two instruction fields holding a register and
4932 an offset, the equivalent of the relocation.
4933 ENUM
4934 BFD_RELOC_MMIX_LOCAL
4935 ENUMDOC
4936 This relocation is an assertion that the expression is not allocated as
4937 a global register. It does not modify contents.
4938
4939 ENUM
4940 BFD_RELOC_AVR_7_PCREL
4941 ENUMDOC
4942 This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4943 short offset into 7 bits.
4944 ENUM
4945 BFD_RELOC_AVR_13_PCREL
4946 ENUMDOC
4947 This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4948 short offset into 12 bits.
4949 ENUM
4950 BFD_RELOC_AVR_16_PM
4951 ENUMDOC
4952 This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4953 program memory address) into 16 bits.
4954 ENUM
4955 BFD_RELOC_AVR_LO8_LDI
4956 ENUMDOC
4957 This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4958 data memory address) into 8 bit immediate value of LDI insn.
4959 ENUM
4960 BFD_RELOC_AVR_HI8_LDI
4961 ENUMDOC
4962 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4963 of data memory address) into 8 bit immediate value of LDI insn.
4964 ENUM
4965 BFD_RELOC_AVR_HH8_LDI
4966 ENUMDOC
4967 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4968 of program memory address) into 8 bit immediate value of LDI insn.
4969 ENUM
4970 BFD_RELOC_AVR_MS8_LDI
4971 ENUMDOC
4972 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4973 of 32 bit value) into 8 bit immediate value of LDI insn.
4974 ENUM
4975 BFD_RELOC_AVR_LO8_LDI_NEG
4976 ENUMDOC
4977 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4978 (usually data memory address) into 8 bit immediate value of SUBI insn.
4979 ENUM
4980 BFD_RELOC_AVR_HI8_LDI_NEG
4981 ENUMDOC
4982 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4983 (high 8 bit of data memory address) into 8 bit immediate value of
4984 SUBI insn.
4985 ENUM
4986 BFD_RELOC_AVR_HH8_LDI_NEG
4987 ENUMDOC
4988 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4989 (most high 8 bit of program memory address) into 8 bit immediate value
4990 of LDI or SUBI insn.
4991 ENUM
4992 BFD_RELOC_AVR_MS8_LDI_NEG
4993 ENUMDOC
4994 This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4995 of 32 bit value) into 8 bit immediate value of LDI insn.
4996 ENUM
4997 BFD_RELOC_AVR_LO8_LDI_PM
4998 ENUMDOC
4999 This is a 16 bit reloc for the AVR that stores 8 bit value (usually
5000 command address) into 8 bit immediate value of LDI insn.
5001 ENUM
5002 BFD_RELOC_AVR_LO8_LDI_GS
5003 ENUMDOC
5004 This is a 16 bit reloc for the AVR that stores 8 bit value
5005 (command address) into 8 bit immediate value of LDI insn. If the address
5006 is beyond the 128k boundary, the linker inserts a jump stub for this reloc
5007 in the lower 128k.
5008 ENUM
5009 BFD_RELOC_AVR_HI8_LDI_PM
5010 ENUMDOC
5011 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
5012 of command address) into 8 bit immediate value of LDI insn.
5013 ENUM
5014 BFD_RELOC_AVR_HI8_LDI_GS
5015 ENUMDOC
5016 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
5017 of command address) into 8 bit immediate value of LDI insn. If the address
5018 is beyond the 128k boundary, the linker inserts a jump stub for this reloc
5019 below 128k.
5020 ENUM
5021 BFD_RELOC_AVR_HH8_LDI_PM
5022 ENUMDOC
5023 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
5024 of command address) into 8 bit immediate value of LDI insn.
5025 ENUM
5026 BFD_RELOC_AVR_LO8_LDI_PM_NEG
5027 ENUMDOC
5028 This is a 16 bit reloc for the AVR that stores negated 8 bit value
5029 (usually command address) into 8 bit immediate value of SUBI insn.
5030 ENUM
5031 BFD_RELOC_AVR_HI8_LDI_PM_NEG
5032 ENUMDOC
5033 This is a 16 bit reloc for the AVR that stores negated 8 bit value
5034 (high 8 bit of 16 bit command address) into 8 bit immediate value
5035 of SUBI insn.
5036 ENUM
5037 BFD_RELOC_AVR_HH8_LDI_PM_NEG
5038 ENUMDOC
5039 This is a 16 bit reloc for the AVR that stores negated 8 bit value
5040 (high 6 bit of 22 bit command address) into 8 bit immediate
5041 value of SUBI insn.
5042 ENUM
5043 BFD_RELOC_AVR_CALL
5044 ENUMDOC
5045 This is a 32 bit reloc for the AVR that stores 23 bit value
5046 into 22 bits.
5047 ENUM
5048 BFD_RELOC_AVR_LDI
5049 ENUMDOC
5050 This is a 16 bit reloc for the AVR that stores all needed bits
5051 for absolute addressing with ldi with overflow check to linktime
5052 ENUM
5053 BFD_RELOC_AVR_6
5054 ENUMDOC
5055 This is a 6 bit reloc for the AVR that stores offset for ldd/std
5056 instructions
5057 ENUM
5058 BFD_RELOC_AVR_6_ADIW
5059 ENUMDOC
5060 This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
5061 instructions
5062 ENUM
5063 BFD_RELOC_AVR_8_LO
5064 ENUMDOC
5065 This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
5066 in .byte lo8(symbol)
5067 ENUM
5068 BFD_RELOC_AVR_8_HI
5069 ENUMDOC
5070 This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
5071 in .byte hi8(symbol)
5072 ENUM
5073 BFD_RELOC_AVR_8_HLO
5074 ENUMDOC
5075 This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
5076 in .byte hlo8(symbol)
5077 ENUM
5078 BFD_RELOC_AVR_DIFF8
5079 ENUMX
5080 BFD_RELOC_AVR_DIFF16
5081 ENUMX
5082 BFD_RELOC_AVR_DIFF32
5083 ENUMDOC
5084 AVR relocations to mark the difference of two local symbols.
5085 These are only needed to support linker relaxation and can be ignored
5086 when not relaxing. The field is set to the value of the difference
5087 assuming no relaxation. The relocation encodes the position of the
5088 second symbol so the linker can determine whether to adjust the field
5089 value.
5090 ENUM
5091 BFD_RELOC_AVR_LDS_STS_16
5092 ENUMDOC
5093 This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
5094 lds and sts instructions supported only tiny core.
5095 ENUM
5096 BFD_RELOC_AVR_PORT6
5097 ENUMDOC
5098 This is a 6 bit reloc for the AVR that stores an I/O register
5099 number for the IN and OUT instructions
5100 ENUM
5101 BFD_RELOC_AVR_PORT5
5102 ENUMDOC
5103 This is a 5 bit reloc for the AVR that stores an I/O register
5104 number for the SBIC, SBIS, SBI and CBI instructions
5105
5106 ENUM
5107 BFD_RELOC_RISCV_HI20
5108 ENUMX
5109 BFD_RELOC_RISCV_PCREL_HI20
5110 ENUMX
5111 BFD_RELOC_RISCV_PCREL_LO12_I
5112 ENUMX
5113 BFD_RELOC_RISCV_PCREL_LO12_S
5114 ENUMX
5115 BFD_RELOC_RISCV_LO12_I
5116 ENUMX
5117 BFD_RELOC_RISCV_LO12_S
5118 ENUMX
5119 BFD_RELOC_RISCV_GPREL12_I
5120 ENUMX
5121 BFD_RELOC_RISCV_GPREL12_S
5122 ENUMX
5123 BFD_RELOC_RISCV_TPREL_HI20
5124 ENUMX
5125 BFD_RELOC_RISCV_TPREL_LO12_I
5126 ENUMX
5127 BFD_RELOC_RISCV_TPREL_LO12_S
5128 ENUMX
5129 BFD_RELOC_RISCV_TPREL_ADD
5130 ENUMX
5131 BFD_RELOC_RISCV_CALL
5132 ENUMX
5133 BFD_RELOC_RISCV_CALL_PLT
5134 ENUMX
5135 BFD_RELOC_RISCV_ADD8
5136 ENUMX
5137 BFD_RELOC_RISCV_ADD16
5138 ENUMX
5139 BFD_RELOC_RISCV_ADD32
5140 ENUMX
5141 BFD_RELOC_RISCV_ADD64
5142 ENUMX
5143 BFD_RELOC_RISCV_SUB8
5144 ENUMX
5145 BFD_RELOC_RISCV_SUB16
5146 ENUMX
5147 BFD_RELOC_RISCV_SUB32
5148 ENUMX
5149 BFD_RELOC_RISCV_SUB64
5150 ENUMX
5151 BFD_RELOC_RISCV_GOT_HI20
5152 ENUMX
5153 BFD_RELOC_RISCV_TLS_GOT_HI20
5154 ENUMX
5155 BFD_RELOC_RISCV_TLS_GD_HI20
5156 ENUMX
5157 BFD_RELOC_RISCV_JMP
5158 ENUMX
5159 BFD_RELOC_RISCV_TLS_DTPMOD32
5160 ENUMX
5161 BFD_RELOC_RISCV_TLS_DTPREL32
5162 ENUMX
5163 BFD_RELOC_RISCV_TLS_DTPMOD64
5164 ENUMX
5165 BFD_RELOC_RISCV_TLS_DTPREL64
5166 ENUMX
5167 BFD_RELOC_RISCV_TLS_TPREL32
5168 ENUMX
5169 BFD_RELOC_RISCV_TLS_TPREL64
5170 ENUMX
5171 BFD_RELOC_RISCV_ALIGN
5172 ENUMX
5173 BFD_RELOC_RISCV_RVC_BRANCH
5174 ENUMX
5175 BFD_RELOC_RISCV_RVC_JUMP
5176 ENUMX
5177 BFD_RELOC_RISCV_RVC_LUI
5178 ENUMX
5179 BFD_RELOC_RISCV_GPREL_I
5180 ENUMX
5181 BFD_RELOC_RISCV_GPREL_S
5182 ENUMX
5183 BFD_RELOC_RISCV_TPREL_I
5184 ENUMX
5185 BFD_RELOC_RISCV_TPREL_S
5186 ENUMX
5187 BFD_RELOC_RISCV_RELAX
5188 ENUMX
5189 BFD_RELOC_RISCV_CFA
5190 ENUMX
5191 BFD_RELOC_RISCV_SUB6
5192 ENUMX
5193 BFD_RELOC_RISCV_SET6
5194 ENUMX
5195 BFD_RELOC_RISCV_SET8
5196 ENUMX
5197 BFD_RELOC_RISCV_SET16
5198 ENUMX
5199 BFD_RELOC_RISCV_SET32
5200 ENUMX
5201 BFD_RELOC_RISCV_32_PCREL
5202 ENUMDOC
5203 RISC-V relocations.
5204
5205 ENUM
5206 BFD_RELOC_RL78_NEG8
5207 ENUMX
5208 BFD_RELOC_RL78_NEG16
5209 ENUMX
5210 BFD_RELOC_RL78_NEG24
5211 ENUMX
5212 BFD_RELOC_RL78_NEG32
5213 ENUMX
5214 BFD_RELOC_RL78_16_OP
5215 ENUMX
5216 BFD_RELOC_RL78_24_OP
5217 ENUMX
5218 BFD_RELOC_RL78_32_OP
5219 ENUMX
5220 BFD_RELOC_RL78_8U
5221 ENUMX
5222 BFD_RELOC_RL78_16U
5223 ENUMX
5224 BFD_RELOC_RL78_24U
5225 ENUMX
5226 BFD_RELOC_RL78_DIR3U_PCREL
5227 ENUMX
5228 BFD_RELOC_RL78_DIFF
5229 ENUMX
5230 BFD_RELOC_RL78_GPRELB
5231 ENUMX
5232 BFD_RELOC_RL78_GPRELW
5233 ENUMX
5234 BFD_RELOC_RL78_GPRELL
5235 ENUMX
5236 BFD_RELOC_RL78_SYM
5237 ENUMX
5238 BFD_RELOC_RL78_OP_SUBTRACT
5239 ENUMX
5240 BFD_RELOC_RL78_OP_NEG
5241 ENUMX
5242 BFD_RELOC_RL78_OP_AND
5243 ENUMX
5244 BFD_RELOC_RL78_OP_SHRA
5245 ENUMX
5246 BFD_RELOC_RL78_ABS8
5247 ENUMX
5248 BFD_RELOC_RL78_ABS16
5249 ENUMX
5250 BFD_RELOC_RL78_ABS16_REV
5251 ENUMX
5252 BFD_RELOC_RL78_ABS32
5253 ENUMX
5254 BFD_RELOC_RL78_ABS32_REV
5255 ENUMX
5256 BFD_RELOC_RL78_ABS16U
5257 ENUMX
5258 BFD_RELOC_RL78_ABS16UW
5259 ENUMX
5260 BFD_RELOC_RL78_ABS16UL
5261 ENUMX
5262 BFD_RELOC_RL78_RELAX
5263 ENUMX
5264 BFD_RELOC_RL78_HI16
5265 ENUMX
5266 BFD_RELOC_RL78_HI8
5267 ENUMX
5268 BFD_RELOC_RL78_LO16
5269 ENUMX
5270 BFD_RELOC_RL78_CODE
5271 ENUMX
5272 BFD_RELOC_RL78_SADDR
5273 ENUMDOC
5274 Renesas RL78 Relocations.
5275
5276 ENUM
5277 BFD_RELOC_RX_NEG8
5278 ENUMX
5279 BFD_RELOC_RX_NEG16
5280 ENUMX
5281 BFD_RELOC_RX_NEG24
5282 ENUMX
5283 BFD_RELOC_RX_NEG32
5284 ENUMX
5285 BFD_RELOC_RX_16_OP
5286 ENUMX
5287 BFD_RELOC_RX_24_OP
5288 ENUMX
5289 BFD_RELOC_RX_32_OP
5290 ENUMX
5291 BFD_RELOC_RX_8U
5292 ENUMX
5293 BFD_RELOC_RX_16U
5294 ENUMX
5295 BFD_RELOC_RX_24U
5296 ENUMX
5297 BFD_RELOC_RX_DIR3U_PCREL
5298 ENUMX
5299 BFD_RELOC_RX_DIFF
5300 ENUMX
5301 BFD_RELOC_RX_GPRELB
5302 ENUMX
5303 BFD_RELOC_RX_GPRELW
5304 ENUMX
5305 BFD_RELOC_RX_GPRELL
5306 ENUMX
5307 BFD_RELOC_RX_SYM
5308 ENUMX
5309 BFD_RELOC_RX_OP_SUBTRACT
5310 ENUMX
5311 BFD_RELOC_RX_OP_NEG
5312 ENUMX
5313 BFD_RELOC_RX_ABS8
5314 ENUMX
5315 BFD_RELOC_RX_ABS16
5316 ENUMX
5317 BFD_RELOC_RX_ABS16_REV
5318 ENUMX
5319 BFD_RELOC_RX_ABS32
5320 ENUMX
5321 BFD_RELOC_RX_ABS32_REV
5322 ENUMX
5323 BFD_RELOC_RX_ABS16U
5324 ENUMX
5325 BFD_RELOC_RX_ABS16UW
5326 ENUMX
5327 BFD_RELOC_RX_ABS16UL
5328 ENUMX
5329 BFD_RELOC_RX_RELAX
5330 ENUMDOC
5331 Renesas RX Relocations.
5332
5333 ENUM
5334 BFD_RELOC_390_12
5335 ENUMDOC
5336 Direct 12 bit.
5337 ENUM
5338 BFD_RELOC_390_GOT12
5339 ENUMDOC
5340 12 bit GOT offset.
5341 ENUM
5342 BFD_RELOC_390_PLT32
5343 ENUMDOC
5344 32 bit PC relative PLT address.
5345 ENUM
5346 BFD_RELOC_390_COPY
5347 ENUMDOC
5348 Copy symbol at runtime.
5349 ENUM
5350 BFD_RELOC_390_GLOB_DAT
5351 ENUMDOC
5352 Create GOT entry.
5353 ENUM
5354 BFD_RELOC_390_JMP_SLOT
5355 ENUMDOC
5356 Create PLT entry.
5357 ENUM
5358 BFD_RELOC_390_RELATIVE
5359 ENUMDOC
5360 Adjust by program base.
5361 ENUM
5362 BFD_RELOC_390_GOTPC
5363 ENUMDOC
5364 32 bit PC relative offset to GOT.
5365 ENUM
5366 BFD_RELOC_390_GOT16
5367 ENUMDOC
5368 16 bit GOT offset.
5369 ENUM
5370 BFD_RELOC_390_PC12DBL
5371 ENUMDOC
5372 PC relative 12 bit shifted by 1.
5373 ENUM
5374 BFD_RELOC_390_PLT12DBL
5375 ENUMDOC
5376 12 bit PC rel. PLT shifted by 1.
5377 ENUM
5378 BFD_RELOC_390_PC16DBL
5379 ENUMDOC
5380 PC relative 16 bit shifted by 1.
5381 ENUM
5382 BFD_RELOC_390_PLT16DBL
5383 ENUMDOC
5384 16 bit PC rel. PLT shifted by 1.
5385 ENUM
5386 BFD_RELOC_390_PC24DBL
5387 ENUMDOC
5388 PC relative 24 bit shifted by 1.
5389 ENUM
5390 BFD_RELOC_390_PLT24DBL
5391 ENUMDOC
5392 24 bit PC rel. PLT shifted by 1.
5393 ENUM
5394 BFD_RELOC_390_PC32DBL
5395 ENUMDOC
5396 PC relative 32 bit shifted by 1.
5397 ENUM
5398 BFD_RELOC_390_PLT32DBL
5399 ENUMDOC
5400 32 bit PC rel. PLT shifted by 1.
5401 ENUM
5402 BFD_RELOC_390_GOTPCDBL
5403 ENUMDOC
5404 32 bit PC rel. GOT shifted by 1.
5405 ENUM
5406 BFD_RELOC_390_GOT64
5407 ENUMDOC
5408 64 bit GOT offset.
5409 ENUM
5410 BFD_RELOC_390_PLT64
5411 ENUMDOC
5412 64 bit PC relative PLT address.
5413 ENUM
5414 BFD_RELOC_390_GOTENT
5415 ENUMDOC
5416 32 bit rel. offset to GOT entry.
5417 ENUM
5418 BFD_RELOC_390_GOTOFF64
5419 ENUMDOC
5420 64 bit offset to GOT.
5421 ENUM
5422 BFD_RELOC_390_GOTPLT12
5423 ENUMDOC
5424 12-bit offset to symbol-entry within GOT, with PLT handling.
5425 ENUM
5426 BFD_RELOC_390_GOTPLT16
5427 ENUMDOC
5428 16-bit offset to symbol-entry within GOT, with PLT handling.
5429 ENUM
5430 BFD_RELOC_390_GOTPLT32
5431 ENUMDOC
5432 32-bit offset to symbol-entry within GOT, with PLT handling.
5433 ENUM
5434 BFD_RELOC_390_GOTPLT64
5435 ENUMDOC
5436 64-bit offset to symbol-entry within GOT, with PLT handling.
5437 ENUM
5438 BFD_RELOC_390_GOTPLTENT
5439 ENUMDOC
5440 32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5441 ENUM
5442 BFD_RELOC_390_PLTOFF16
5443 ENUMDOC
5444 16-bit rel. offset from the GOT to a PLT entry.
5445 ENUM
5446 BFD_RELOC_390_PLTOFF32
5447 ENUMDOC
5448 32-bit rel. offset from the GOT to a PLT entry.
5449 ENUM
5450 BFD_RELOC_390_PLTOFF64
5451 ENUMDOC
5452 64-bit rel. offset from the GOT to a PLT entry.
5453
5454 ENUM
5455 BFD_RELOC_390_TLS_LOAD
5456 ENUMX
5457 BFD_RELOC_390_TLS_GDCALL
5458 ENUMX
5459 BFD_RELOC_390_TLS_LDCALL
5460 ENUMX
5461 BFD_RELOC_390_TLS_GD32
5462 ENUMX
5463 BFD_RELOC_390_TLS_GD64
5464 ENUMX
5465 BFD_RELOC_390_TLS_GOTIE12
5466 ENUMX
5467 BFD_RELOC_390_TLS_GOTIE32
5468 ENUMX
5469 BFD_RELOC_390_TLS_GOTIE64
5470 ENUMX
5471 BFD_RELOC_390_TLS_LDM32
5472 ENUMX
5473 BFD_RELOC_390_TLS_LDM64
5474 ENUMX
5475 BFD_RELOC_390_TLS_IE32
5476 ENUMX
5477 BFD_RELOC_390_TLS_IE64
5478 ENUMX
5479 BFD_RELOC_390_TLS_IEENT
5480 ENUMX
5481 BFD_RELOC_390_TLS_LE32
5482 ENUMX
5483 BFD_RELOC_390_TLS_LE64
5484 ENUMX
5485 BFD_RELOC_390_TLS_LDO32
5486 ENUMX
5487 BFD_RELOC_390_TLS_LDO64
5488 ENUMX
5489 BFD_RELOC_390_TLS_DTPMOD
5490 ENUMX
5491 BFD_RELOC_390_TLS_DTPOFF
5492 ENUMX
5493 BFD_RELOC_390_TLS_TPOFF
5494 ENUMDOC
5495 s390 tls relocations.
5496
5497 ENUM
5498 BFD_RELOC_390_20
5499 ENUMX
5500 BFD_RELOC_390_GOT20
5501 ENUMX
5502 BFD_RELOC_390_GOTPLT20
5503 ENUMX
5504 BFD_RELOC_390_TLS_GOTIE20
5505 ENUMDOC
5506 Long displacement extension.
5507
5508 ENUM
5509 BFD_RELOC_390_IRELATIVE
5510 ENUMDOC
5511 STT_GNU_IFUNC relocation.
5512
5513 ENUM
5514 BFD_RELOC_SCORE_GPREL15
5515 ENUMDOC
5516 Score relocations
5517 Low 16 bit for load/store
5518 ENUM
5519 BFD_RELOC_SCORE_DUMMY2
5520 ENUMX
5521 BFD_RELOC_SCORE_JMP
5522 ENUMDOC
5523 This is a 24-bit reloc with the right 1 bit assumed to be 0
5524 ENUM
5525 BFD_RELOC_SCORE_BRANCH
5526 ENUMDOC
5527 This is a 19-bit reloc with the right 1 bit assumed to be 0
5528 ENUM
5529 BFD_RELOC_SCORE_IMM30
5530 ENUMDOC
5531 This is a 32-bit reloc for 48-bit instructions.
5532 ENUM
5533 BFD_RELOC_SCORE_IMM32
5534 ENUMDOC
5535 This is a 32-bit reloc for 48-bit instructions.
5536 ENUM
5537 BFD_RELOC_SCORE16_JMP
5538 ENUMDOC
5539 This is a 11-bit reloc with the right 1 bit assumed to be 0
5540 ENUM
5541 BFD_RELOC_SCORE16_BRANCH
5542 ENUMDOC
5543 This is a 8-bit reloc with the right 1 bit assumed to be 0
5544 ENUM
5545 BFD_RELOC_SCORE_BCMP
5546 ENUMDOC
5547 This is a 9-bit reloc with the right 1 bit assumed to be 0
5548 ENUM
5549 BFD_RELOC_SCORE_GOT15
5550 ENUMX
5551 BFD_RELOC_SCORE_GOT_LO16
5552 ENUMX
5553 BFD_RELOC_SCORE_CALL15
5554 ENUMX
5555 BFD_RELOC_SCORE_DUMMY_HI16
5556 ENUMDOC
5557 Undocumented Score relocs
5558
5559 ENUM
5560 BFD_RELOC_IP2K_FR9
5561 ENUMDOC
5562 Scenix IP2K - 9-bit register number / data address
5563 ENUM
5564 BFD_RELOC_IP2K_BANK
5565 ENUMDOC
5566 Scenix IP2K - 4-bit register/data bank number
5567 ENUM
5568 BFD_RELOC_IP2K_ADDR16CJP
5569 ENUMDOC
5570 Scenix IP2K - low 13 bits of instruction word address
5571 ENUM
5572 BFD_RELOC_IP2K_PAGE3
5573 ENUMDOC
5574 Scenix IP2K - high 3 bits of instruction word address
5575 ENUM
5576 BFD_RELOC_IP2K_LO8DATA
5577 ENUMX
5578 BFD_RELOC_IP2K_HI8DATA
5579 ENUMX
5580 BFD_RELOC_IP2K_EX8DATA
5581 ENUMDOC
5582 Scenix IP2K - ext/low/high 8 bits of data address
5583 ENUM
5584 BFD_RELOC_IP2K_LO8INSN
5585 ENUMX
5586 BFD_RELOC_IP2K_HI8INSN
5587 ENUMDOC
5588 Scenix IP2K - low/high 8 bits of instruction word address
5589 ENUM
5590 BFD_RELOC_IP2K_PC_SKIP
5591 ENUMDOC
5592 Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5593 ENUM
5594 BFD_RELOC_IP2K_TEXT
5595 ENUMDOC
5596 Scenix IP2K - 16 bit word address in text section.
5597 ENUM
5598 BFD_RELOC_IP2K_FR_OFFSET
5599 ENUMDOC
5600 Scenix IP2K - 7-bit sp or dp offset
5601 ENUM
5602 BFD_RELOC_VPE4KMATH_DATA
5603 ENUMX
5604 BFD_RELOC_VPE4KMATH_INSN
5605 ENUMDOC
5606 Scenix VPE4K coprocessor - data/insn-space addressing
5607
5608 ENUM
5609 BFD_RELOC_VTABLE_INHERIT
5610 ENUMX
5611 BFD_RELOC_VTABLE_ENTRY
5612 ENUMDOC
5613 These two relocations are used by the linker to determine which of
5614 the entries in a C++ virtual function table are actually used. When
5615 the --gc-sections option is given, the linker will zero out the entries
5616 that are not used, so that the code for those functions need not be
5617 included in the output.
5618
5619 VTABLE_INHERIT is a zero-space relocation used to describe to the
5620 linker the inheritance tree of a C++ virtual function table. The
5621 relocation's symbol should be the parent class' vtable, and the
5622 relocation should be located at the child vtable.
5623
5624 VTABLE_ENTRY is a zero-space relocation that describes the use of a
5625 virtual function table entry. The reloc's symbol should refer to the
5626 table of the class mentioned in the code. Off of that base, an offset
5627 describes the entry that is being used. For Rela hosts, this offset
5628 is stored in the reloc's addend. For Rel hosts, we are forced to put
5629 this offset in the reloc's section offset.
5630
5631 ENUM
5632 BFD_RELOC_IA64_IMM14
5633 ENUMX
5634 BFD_RELOC_IA64_IMM22
5635 ENUMX
5636 BFD_RELOC_IA64_IMM64
5637 ENUMX
5638 BFD_RELOC_IA64_DIR32MSB
5639 ENUMX
5640 BFD_RELOC_IA64_DIR32LSB
5641 ENUMX
5642 BFD_RELOC_IA64_DIR64MSB
5643 ENUMX
5644 BFD_RELOC_IA64_DIR64LSB
5645 ENUMX
5646 BFD_RELOC_IA64_GPREL22
5647 ENUMX
5648 BFD_RELOC_IA64_GPREL64I
5649 ENUMX
5650 BFD_RELOC_IA64_GPREL32MSB
5651 ENUMX
5652 BFD_RELOC_IA64_GPREL32LSB
5653 ENUMX
5654 BFD_RELOC_IA64_GPREL64MSB
5655 ENUMX
5656 BFD_RELOC_IA64_GPREL64LSB
5657 ENUMX
5658 BFD_RELOC_IA64_LTOFF22
5659 ENUMX
5660 BFD_RELOC_IA64_LTOFF64I
5661 ENUMX
5662 BFD_RELOC_IA64_PLTOFF22
5663 ENUMX
5664 BFD_RELOC_IA64_PLTOFF64I
5665 ENUMX
5666 BFD_RELOC_IA64_PLTOFF64MSB
5667 ENUMX
5668 BFD_RELOC_IA64_PLTOFF64LSB
5669 ENUMX
5670 BFD_RELOC_IA64_FPTR64I
5671 ENUMX
5672 BFD_RELOC_IA64_FPTR32MSB
5673 ENUMX
5674 BFD_RELOC_IA64_FPTR32LSB
5675 ENUMX
5676 BFD_RELOC_IA64_FPTR64MSB
5677 ENUMX
5678 BFD_RELOC_IA64_FPTR64LSB
5679 ENUMX
5680 BFD_RELOC_IA64_PCREL21B
5681 ENUMX
5682 BFD_RELOC_IA64_PCREL21BI
5683 ENUMX
5684 BFD_RELOC_IA64_PCREL21M
5685 ENUMX
5686 BFD_RELOC_IA64_PCREL21F
5687 ENUMX
5688 BFD_RELOC_IA64_PCREL22
5689 ENUMX
5690 BFD_RELOC_IA64_PCREL60B
5691 ENUMX
5692 BFD_RELOC_IA64_PCREL64I
5693 ENUMX
5694 BFD_RELOC_IA64_PCREL32MSB
5695 ENUMX
5696 BFD_RELOC_IA64_PCREL32LSB
5697 ENUMX
5698 BFD_RELOC_IA64_PCREL64MSB
5699 ENUMX
5700 BFD_RELOC_IA64_PCREL64LSB
5701 ENUMX
5702 BFD_RELOC_IA64_LTOFF_FPTR22
5703 ENUMX
5704 BFD_RELOC_IA64_LTOFF_FPTR64I
5705 ENUMX
5706 BFD_RELOC_IA64_LTOFF_FPTR32MSB
5707 ENUMX
5708 BFD_RELOC_IA64_LTOFF_FPTR32LSB
5709 ENUMX
5710 BFD_RELOC_IA64_LTOFF_FPTR64MSB
5711 ENUMX
5712 BFD_RELOC_IA64_LTOFF_FPTR64LSB
5713 ENUMX
5714 BFD_RELOC_IA64_SEGREL32MSB
5715 ENUMX
5716 BFD_RELOC_IA64_SEGREL32LSB
5717 ENUMX
5718 BFD_RELOC_IA64_SEGREL64MSB
5719 ENUMX
5720 BFD_RELOC_IA64_SEGREL64LSB
5721 ENUMX
5722 BFD_RELOC_IA64_SECREL32MSB
5723 ENUMX
5724 BFD_RELOC_IA64_SECREL32LSB
5725 ENUMX
5726 BFD_RELOC_IA64_SECREL64MSB
5727 ENUMX
5728 BFD_RELOC_IA64_SECREL64LSB
5729 ENUMX
5730 BFD_RELOC_IA64_REL32MSB
5731 ENUMX
5732 BFD_RELOC_IA64_REL32LSB
5733 ENUMX
5734 BFD_RELOC_IA64_REL64MSB
5735 ENUMX
5736 BFD_RELOC_IA64_REL64LSB
5737 ENUMX
5738 BFD_RELOC_IA64_LTV32MSB
5739 ENUMX
5740 BFD_RELOC_IA64_LTV32LSB
5741 ENUMX
5742 BFD_RELOC_IA64_LTV64MSB
5743 ENUMX
5744 BFD_RELOC_IA64_LTV64LSB
5745 ENUMX
5746 BFD_RELOC_IA64_IPLTMSB
5747 ENUMX
5748 BFD_RELOC_IA64_IPLTLSB
5749 ENUMX
5750 BFD_RELOC_IA64_COPY
5751 ENUMX
5752 BFD_RELOC_IA64_LTOFF22X
5753 ENUMX
5754 BFD_RELOC_IA64_LDXMOV
5755 ENUMX
5756 BFD_RELOC_IA64_TPREL14
5757 ENUMX
5758 BFD_RELOC_IA64_TPREL22
5759 ENUMX
5760 BFD_RELOC_IA64_TPREL64I
5761 ENUMX
5762 BFD_RELOC_IA64_TPREL64MSB
5763 ENUMX
5764 BFD_RELOC_IA64_TPREL64LSB
5765 ENUMX
5766 BFD_RELOC_IA64_LTOFF_TPREL22
5767 ENUMX
5768 BFD_RELOC_IA64_DTPMOD64MSB
5769 ENUMX
5770 BFD_RELOC_IA64_DTPMOD64LSB
5771 ENUMX
5772 BFD_RELOC_IA64_LTOFF_DTPMOD22
5773 ENUMX
5774 BFD_RELOC_IA64_DTPREL14
5775 ENUMX
5776 BFD_RELOC_IA64_DTPREL22
5777 ENUMX
5778 BFD_RELOC_IA64_DTPREL64I
5779 ENUMX
5780 BFD_RELOC_IA64_DTPREL32MSB
5781 ENUMX
5782 BFD_RELOC_IA64_DTPREL32LSB
5783 ENUMX
5784 BFD_RELOC_IA64_DTPREL64MSB
5785 ENUMX
5786 BFD_RELOC_IA64_DTPREL64LSB
5787 ENUMX
5788 BFD_RELOC_IA64_LTOFF_DTPREL22
5789 ENUMDOC
5790 Intel IA64 Relocations.
5791
5792 ENUM
5793 BFD_RELOC_M68HC11_HI8
5794 ENUMDOC
5795 Motorola 68HC11 reloc.
5796 This is the 8 bit high part of an absolute address.
5797 ENUM
5798 BFD_RELOC_M68HC11_LO8
5799 ENUMDOC
5800 Motorola 68HC11 reloc.
5801 This is the 8 bit low part of an absolute address.
5802 ENUM
5803 BFD_RELOC_M68HC11_3B
5804 ENUMDOC
5805 Motorola 68HC11 reloc.
5806 This is the 3 bit of a value.
5807 ENUM
5808 BFD_RELOC_M68HC11_RL_JUMP
5809 ENUMDOC
5810 Motorola 68HC11 reloc.
5811 This reloc marks the beginning of a jump/call instruction.
5812 It is used for linker relaxation to correctly identify beginning
5813 of instruction and change some branches to use PC-relative
5814 addressing mode.
5815 ENUM
5816 BFD_RELOC_M68HC11_RL_GROUP
5817 ENUMDOC
5818 Motorola 68HC11 reloc.
5819 This reloc marks a group of several instructions that gcc generates
5820 and for which the linker relaxation pass can modify and/or remove
5821 some of them.
5822 ENUM
5823 BFD_RELOC_M68HC11_LO16
5824 ENUMDOC
5825 Motorola 68HC11 reloc.
5826 This is the 16-bit lower part of an address. It is used for 'call'
5827 instruction to specify the symbol address without any special
5828 transformation (due to memory bank window).
5829 ENUM
5830 BFD_RELOC_M68HC11_PAGE
5831 ENUMDOC
5832 Motorola 68HC11 reloc.
5833 This is a 8-bit reloc that specifies the page number of an address.
5834 It is used by 'call' instruction to specify the page number of
5835 the symbol.
5836 ENUM
5837 BFD_RELOC_M68HC11_24
5838 ENUMDOC
5839 Motorola 68HC11 reloc.
5840 This is a 24-bit reloc that represents the address with a 16-bit
5841 value and a 8-bit page number. The symbol address is transformed
5842 to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5843 ENUM
5844 BFD_RELOC_M68HC12_5B
5845 ENUMDOC
5846 Motorola 68HC12 reloc.
5847 This is the 5 bits of a value.
5848 ENUM
5849 BFD_RELOC_XGATE_RL_JUMP
5850 ENUMDOC
5851 Freescale XGATE reloc.
5852 This reloc marks the beginning of a bra/jal instruction.
5853 ENUM
5854 BFD_RELOC_XGATE_RL_GROUP
5855 ENUMDOC
5856 Freescale XGATE reloc.
5857 This reloc marks a group of several instructions that gcc generates
5858 and for which the linker relaxation pass can modify and/or remove
5859 some of them.
5860 ENUM
5861 BFD_RELOC_XGATE_LO16
5862 ENUMDOC
5863 Freescale XGATE reloc.
5864 This is the 16-bit lower part of an address. It is used for the '16-bit'
5865 instructions.
5866 ENUM
5867 BFD_RELOC_XGATE_GPAGE
5868 ENUMDOC
5869 Freescale XGATE reloc.
5870 ENUM
5871 BFD_RELOC_XGATE_24
5872 ENUMDOC
5873 Freescale XGATE reloc.
5874 ENUM
5875 BFD_RELOC_XGATE_PCREL_9
5876 ENUMDOC
5877 Freescale XGATE reloc.
5878 This is a 9-bit pc-relative reloc.
5879 ENUM
5880 BFD_RELOC_XGATE_PCREL_10
5881 ENUMDOC
5882 Freescale XGATE reloc.
5883 This is a 10-bit pc-relative reloc.
5884 ENUM
5885 BFD_RELOC_XGATE_IMM8_LO
5886 ENUMDOC
5887 Freescale XGATE reloc.
5888 This is the 16-bit lower part of an address. It is used for the '16-bit'
5889 instructions.
5890 ENUM
5891 BFD_RELOC_XGATE_IMM8_HI
5892 ENUMDOC
5893 Freescale XGATE reloc.
5894 This is the 16-bit higher part of an address. It is used for the '16-bit'
5895 instructions.
5896 ENUM
5897 BFD_RELOC_XGATE_IMM3
5898 ENUMDOC
5899 Freescale XGATE reloc.
5900 This is a 3-bit pc-relative reloc.
5901 ENUM
5902 BFD_RELOC_XGATE_IMM4
5903 ENUMDOC
5904 Freescale XGATE reloc.
5905 This is a 4-bit pc-relative reloc.
5906 ENUM
5907 BFD_RELOC_XGATE_IMM5
5908 ENUMDOC
5909 Freescale XGATE reloc.
5910 This is a 5-bit pc-relative reloc.
5911 ENUM
5912 BFD_RELOC_M68HC12_9B
5913 ENUMDOC
5914 Motorola 68HC12 reloc.
5915 This is the 9 bits of a value.
5916 ENUM
5917 BFD_RELOC_M68HC12_16B
5918 ENUMDOC
5919 Motorola 68HC12 reloc.
5920 This is the 16 bits of a value.
5921 ENUM
5922 BFD_RELOC_M68HC12_9_PCREL
5923 ENUMDOC
5924 Motorola 68HC12/XGATE reloc.
5925 This is a PCREL9 branch.
5926 ENUM
5927 BFD_RELOC_M68HC12_10_PCREL
5928 ENUMDOC
5929 Motorola 68HC12/XGATE reloc.
5930 This is a PCREL10 branch.
5931 ENUM
5932 BFD_RELOC_M68HC12_LO8XG
5933 ENUMDOC
5934 Motorola 68HC12/XGATE reloc.
5935 This is the 8 bit low part of an absolute address and immediately precedes
5936 a matching HI8XG part.
5937 ENUM
5938 BFD_RELOC_M68HC12_HI8XG
5939 ENUMDOC
5940 Motorola 68HC12/XGATE reloc.
5941 This is the 8 bit high part of an absolute address and immediately follows
5942 a matching LO8XG part.
5943 ENUM
5944 BFD_RELOC_S12Z_15_PCREL
5945 ENUMDOC
5946 Freescale S12Z reloc.
5947 This is a 15 bit relative address. If the most significant bits are all zero
5948 then it may be truncated to 8 bits.
5949 ENUM
5950 BFD_RELOC_16C_NUM08
5951 ENUMX
5952 BFD_RELOC_16C_NUM08_C
5953 ENUMX
5954 BFD_RELOC_16C_NUM16
5955 ENUMX
5956 BFD_RELOC_16C_NUM16_C
5957 ENUMX
5958 BFD_RELOC_16C_NUM32
5959 ENUMX
5960 BFD_RELOC_16C_NUM32_C
5961 ENUMX
5962 BFD_RELOC_16C_DISP04
5963 ENUMX
5964 BFD_RELOC_16C_DISP04_C
5965 ENUMX
5966 BFD_RELOC_16C_DISP08
5967 ENUMX
5968 BFD_RELOC_16C_DISP08_C
5969 ENUMX
5970 BFD_RELOC_16C_DISP16
5971 ENUMX
5972 BFD_RELOC_16C_DISP16_C
5973 ENUMX
5974 BFD_RELOC_16C_DISP24
5975 ENUMX
5976 BFD_RELOC_16C_DISP24_C
5977 ENUMX
5978 BFD_RELOC_16C_DISP24a
5979 ENUMX
5980 BFD_RELOC_16C_DISP24a_C
5981 ENUMX
5982 BFD_RELOC_16C_REG04
5983 ENUMX
5984 BFD_RELOC_16C_REG04_C
5985 ENUMX
5986 BFD_RELOC_16C_REG04a
5987 ENUMX
5988 BFD_RELOC_16C_REG04a_C
5989 ENUMX
5990 BFD_RELOC_16C_REG14
5991 ENUMX
5992 BFD_RELOC_16C_REG14_C
5993 ENUMX
5994 BFD_RELOC_16C_REG16
5995 ENUMX
5996 BFD_RELOC_16C_REG16_C
5997 ENUMX
5998 BFD_RELOC_16C_REG20
5999 ENUMX
6000 BFD_RELOC_16C_REG20_C
6001 ENUMX
6002 BFD_RELOC_16C_ABS20
6003 ENUMX
6004 BFD_RELOC_16C_ABS20_C
6005 ENUMX
6006 BFD_RELOC_16C_ABS24
6007 ENUMX
6008 BFD_RELOC_16C_ABS24_C
6009 ENUMX
6010 BFD_RELOC_16C_IMM04
6011 ENUMX
6012 BFD_RELOC_16C_IMM04_C
6013 ENUMX
6014 BFD_RELOC_16C_IMM16
6015 ENUMX
6016 BFD_RELOC_16C_IMM16_C
6017 ENUMX
6018 BFD_RELOC_16C_IMM20
6019 ENUMX
6020 BFD_RELOC_16C_IMM20_C
6021 ENUMX
6022 BFD_RELOC_16C_IMM24
6023 ENUMX
6024 BFD_RELOC_16C_IMM24_C
6025 ENUMX
6026 BFD_RELOC_16C_IMM32
6027 ENUMX
6028 BFD_RELOC_16C_IMM32_C
6029 ENUMDOC
6030 NS CR16C Relocations.
6031
6032 ENUM
6033 BFD_RELOC_CR16_NUM8
6034 ENUMX
6035 BFD_RELOC_CR16_NUM16
6036 ENUMX
6037 BFD_RELOC_CR16_NUM32
6038 ENUMX
6039 BFD_RELOC_CR16_NUM32a
6040 ENUMX
6041 BFD_RELOC_CR16_REGREL0
6042 ENUMX
6043 BFD_RELOC_CR16_REGREL4
6044 ENUMX
6045 BFD_RELOC_CR16_REGREL4a
6046 ENUMX
6047 BFD_RELOC_CR16_REGREL14
6048 ENUMX
6049 BFD_RELOC_CR16_REGREL14a
6050 ENUMX
6051 BFD_RELOC_CR16_REGREL16
6052 ENUMX
6053 BFD_RELOC_CR16_REGREL20
6054 ENUMX
6055 BFD_RELOC_CR16_REGREL20a
6056 ENUMX
6057 BFD_RELOC_CR16_ABS20
6058 ENUMX
6059 BFD_RELOC_CR16_ABS24
6060 ENUMX
6061 BFD_RELOC_CR16_IMM4
6062 ENUMX
6063 BFD_RELOC_CR16_IMM8
6064 ENUMX
6065 BFD_RELOC_CR16_IMM16
6066 ENUMX
6067 BFD_RELOC_CR16_IMM20
6068 ENUMX
6069 BFD_RELOC_CR16_IMM24
6070 ENUMX
6071 BFD_RELOC_CR16_IMM32
6072 ENUMX
6073 BFD_RELOC_CR16_IMM32a
6074 ENUMX
6075 BFD_RELOC_CR16_DISP4
6076 ENUMX
6077 BFD_RELOC_CR16_DISP8
6078 ENUMX
6079 BFD_RELOC_CR16_DISP16
6080 ENUMX
6081 BFD_RELOC_CR16_DISP20
6082 ENUMX
6083 BFD_RELOC_CR16_DISP24
6084 ENUMX
6085 BFD_RELOC_CR16_DISP24a
6086 ENUMX
6087 BFD_RELOC_CR16_SWITCH8
6088 ENUMX
6089 BFD_RELOC_CR16_SWITCH16
6090 ENUMX
6091 BFD_RELOC_CR16_SWITCH32
6092 ENUMX
6093 BFD_RELOC_CR16_GOT_REGREL20
6094 ENUMX
6095 BFD_RELOC_CR16_GOTC_REGREL20
6096 ENUMX
6097 BFD_RELOC_CR16_GLOB_DAT
6098 ENUMDOC
6099 NS CR16 Relocations.
6100
6101 ENUM
6102 BFD_RELOC_CRX_REL4
6103 ENUMX
6104 BFD_RELOC_CRX_REL8
6105 ENUMX
6106 BFD_RELOC_CRX_REL8_CMP
6107 ENUMX
6108 BFD_RELOC_CRX_REL16
6109 ENUMX
6110 BFD_RELOC_CRX_REL24
6111 ENUMX
6112 BFD_RELOC_CRX_REL32
6113 ENUMX
6114 BFD_RELOC_CRX_REGREL12
6115 ENUMX
6116 BFD_RELOC_CRX_REGREL22
6117 ENUMX
6118 BFD_RELOC_CRX_REGREL28
6119 ENUMX
6120 BFD_RELOC_CRX_REGREL32
6121 ENUMX
6122 BFD_RELOC_CRX_ABS16
6123 ENUMX
6124 BFD_RELOC_CRX_ABS32
6125 ENUMX
6126 BFD_RELOC_CRX_NUM8
6127 ENUMX
6128 BFD_RELOC_CRX_NUM16
6129 ENUMX
6130 BFD_RELOC_CRX_NUM32
6131 ENUMX
6132 BFD_RELOC_CRX_IMM16
6133 ENUMX
6134 BFD_RELOC_CRX_IMM32
6135 ENUMX
6136 BFD_RELOC_CRX_SWITCH8
6137 ENUMX
6138 BFD_RELOC_CRX_SWITCH16
6139 ENUMX
6140 BFD_RELOC_CRX_SWITCH32
6141 ENUMDOC
6142 NS CRX Relocations.
6143
6144 ENUM
6145 BFD_RELOC_CRIS_BDISP8
6146 ENUMX
6147 BFD_RELOC_CRIS_UNSIGNED_5
6148 ENUMX
6149 BFD_RELOC_CRIS_SIGNED_6
6150 ENUMX
6151 BFD_RELOC_CRIS_UNSIGNED_6
6152 ENUMX
6153 BFD_RELOC_CRIS_SIGNED_8
6154 ENUMX
6155 BFD_RELOC_CRIS_UNSIGNED_8
6156 ENUMX
6157 BFD_RELOC_CRIS_SIGNED_16
6158 ENUMX
6159 BFD_RELOC_CRIS_UNSIGNED_16
6160 ENUMX
6161 BFD_RELOC_CRIS_LAPCQ_OFFSET
6162 ENUMX
6163 BFD_RELOC_CRIS_UNSIGNED_4
6164 ENUMDOC
6165 These relocs are only used within the CRIS assembler. They are not
6166 (at present) written to any object files.
6167 ENUM
6168 BFD_RELOC_CRIS_COPY
6169 ENUMX
6170 BFD_RELOC_CRIS_GLOB_DAT
6171 ENUMX
6172 BFD_RELOC_CRIS_JUMP_SLOT
6173 ENUMX
6174 BFD_RELOC_CRIS_RELATIVE
6175 ENUMDOC
6176 Relocs used in ELF shared libraries for CRIS.
6177 ENUM
6178 BFD_RELOC_CRIS_32_GOT
6179 ENUMDOC
6180 32-bit offset to symbol-entry within GOT.
6181 ENUM
6182 BFD_RELOC_CRIS_16_GOT
6183 ENUMDOC
6184 16-bit offset to symbol-entry within GOT.
6185 ENUM
6186 BFD_RELOC_CRIS_32_GOTPLT
6187 ENUMDOC
6188 32-bit offset to symbol-entry within GOT, with PLT handling.
6189 ENUM
6190 BFD_RELOC_CRIS_16_GOTPLT
6191 ENUMDOC
6192 16-bit offset to symbol-entry within GOT, with PLT handling.
6193 ENUM
6194 BFD_RELOC_CRIS_32_GOTREL
6195 ENUMDOC
6196 32-bit offset to symbol, relative to GOT.
6197 ENUM
6198 BFD_RELOC_CRIS_32_PLT_GOTREL
6199 ENUMDOC
6200 32-bit offset to symbol with PLT entry, relative to GOT.
6201 ENUM
6202 BFD_RELOC_CRIS_32_PLT_PCREL
6203 ENUMDOC
6204 32-bit offset to symbol with PLT entry, relative to this relocation.
6205
6206 ENUM
6207 BFD_RELOC_CRIS_32_GOT_GD
6208 ENUMX
6209 BFD_RELOC_CRIS_16_GOT_GD
6210 ENUMX
6211 BFD_RELOC_CRIS_32_GD
6212 ENUMX
6213 BFD_RELOC_CRIS_DTP
6214 ENUMX
6215 BFD_RELOC_CRIS_32_DTPREL
6216 ENUMX
6217 BFD_RELOC_CRIS_16_DTPREL
6218 ENUMX
6219 BFD_RELOC_CRIS_32_GOT_TPREL
6220 ENUMX
6221 BFD_RELOC_CRIS_16_GOT_TPREL
6222 ENUMX
6223 BFD_RELOC_CRIS_32_TPREL
6224 ENUMX
6225 BFD_RELOC_CRIS_16_TPREL
6226 ENUMX
6227 BFD_RELOC_CRIS_DTPMOD
6228 ENUMX
6229 BFD_RELOC_CRIS_32_IE
6230 ENUMDOC
6231 Relocs used in TLS code for CRIS.
6232
6233 ENUM
6234 BFD_RELOC_OR1K_REL_26
6235 ENUMX
6236 BFD_RELOC_OR1K_SLO16
6237 ENUMX
6238 BFD_RELOC_OR1K_PCREL_PG21
6239 ENUMX
6240 BFD_RELOC_OR1K_LO13
6241 ENUMX
6242 BFD_RELOC_OR1K_SLO13
6243 ENUMX
6244 BFD_RELOC_OR1K_GOTPC_HI16
6245 ENUMX
6246 BFD_RELOC_OR1K_GOTPC_LO16
6247 ENUMX
6248 BFD_RELOC_OR1K_GOT16
6249 ENUMX
6250 BFD_RELOC_OR1K_GOT_PG21
6251 ENUMX
6252 BFD_RELOC_OR1K_GOT_LO13
6253 ENUMX
6254 BFD_RELOC_OR1K_PLT26
6255 ENUMX
6256 BFD_RELOC_OR1K_PLTA26
6257 ENUMX
6258 BFD_RELOC_OR1K_GOTOFF_SLO16
6259 ENUMX
6260 BFD_RELOC_OR1K_COPY
6261 ENUMX
6262 BFD_RELOC_OR1K_GLOB_DAT
6263 ENUMX
6264 BFD_RELOC_OR1K_JMP_SLOT
6265 ENUMX
6266 BFD_RELOC_OR1K_RELATIVE
6267 ENUMX
6268 BFD_RELOC_OR1K_TLS_GD_HI16
6269 ENUMX
6270 BFD_RELOC_OR1K_TLS_GD_LO16
6271 ENUMX
6272 BFD_RELOC_OR1K_TLS_GD_PG21
6273 ENUMX
6274 BFD_RELOC_OR1K_TLS_GD_LO13
6275 ENUMX
6276 BFD_RELOC_OR1K_TLS_LDM_HI16
6277 ENUMX
6278 BFD_RELOC_OR1K_TLS_LDM_LO16
6279 ENUMX
6280 BFD_RELOC_OR1K_TLS_LDM_PG21
6281 ENUMX
6282 BFD_RELOC_OR1K_TLS_LDM_LO13
6283 ENUMX
6284 BFD_RELOC_OR1K_TLS_LDO_HI16
6285 ENUMX
6286 BFD_RELOC_OR1K_TLS_LDO_LO16
6287 ENUMX
6288 BFD_RELOC_OR1K_TLS_IE_HI16
6289 ENUMX
6290 BFD_RELOC_OR1K_TLS_IE_AHI16
6291 ENUMX
6292 BFD_RELOC_OR1K_TLS_IE_LO16
6293 ENUMX
6294 BFD_RELOC_OR1K_TLS_IE_PG21
6295 ENUMX
6296 BFD_RELOC_OR1K_TLS_IE_LO13
6297 ENUMX
6298 BFD_RELOC_OR1K_TLS_LE_HI16
6299 ENUMX
6300 BFD_RELOC_OR1K_TLS_LE_AHI16
6301 ENUMX
6302 BFD_RELOC_OR1K_TLS_LE_LO16
6303 ENUMX
6304 BFD_RELOC_OR1K_TLS_LE_SLO16
6305 ENUMX
6306 BFD_RELOC_OR1K_TLS_TPOFF
6307 ENUMX
6308 BFD_RELOC_OR1K_TLS_DTPOFF
6309 ENUMX
6310 BFD_RELOC_OR1K_TLS_DTPMOD
6311 ENUMDOC
6312 OpenRISC 1000 Relocations.
6313
6314 ENUM
6315 BFD_RELOC_H8_DIR16A8
6316 ENUMX
6317 BFD_RELOC_H8_DIR16R8
6318 ENUMX
6319 BFD_RELOC_H8_DIR24A8
6320 ENUMX
6321 BFD_RELOC_H8_DIR24R8
6322 ENUMX
6323 BFD_RELOC_H8_DIR32A16
6324 ENUMX
6325 BFD_RELOC_H8_DISP32A16
6326 ENUMDOC
6327 H8 elf Relocations.
6328
6329 ENUM
6330 BFD_RELOC_XSTORMY16_REL_12
6331 ENUMX
6332 BFD_RELOC_XSTORMY16_12
6333 ENUMX
6334 BFD_RELOC_XSTORMY16_24
6335 ENUMX
6336 BFD_RELOC_XSTORMY16_FPTR16
6337 ENUMDOC
6338 Sony Xstormy16 Relocations.
6339
6340 ENUM
6341 BFD_RELOC_RELC
6342 ENUMDOC
6343 Self-describing complex relocations.
6344 COMMENT
6345
6346 ENUM
6347 BFD_RELOC_XC16X_PAG
6348 ENUMX
6349 BFD_RELOC_XC16X_POF
6350 ENUMX
6351 BFD_RELOC_XC16X_SEG
6352 ENUMX
6353 BFD_RELOC_XC16X_SOF
6354 ENUMDOC
6355 Infineon Relocations.
6356
6357 ENUM
6358 BFD_RELOC_VAX_GLOB_DAT
6359 ENUMX
6360 BFD_RELOC_VAX_JMP_SLOT
6361 ENUMX
6362 BFD_RELOC_VAX_RELATIVE
6363 ENUMDOC
6364 Relocations used by VAX ELF.
6365
6366 ENUM
6367 BFD_RELOC_MT_PC16
6368 ENUMDOC
6369 Morpho MT - 16 bit immediate relocation.
6370 ENUM
6371 BFD_RELOC_MT_HI16
6372 ENUMDOC
6373 Morpho MT - Hi 16 bits of an address.
6374 ENUM
6375 BFD_RELOC_MT_LO16
6376 ENUMDOC
6377 Morpho MT - Low 16 bits of an address.
6378 ENUM
6379 BFD_RELOC_MT_GNU_VTINHERIT
6380 ENUMDOC
6381 Morpho MT - Used to tell the linker which vtable entries are used.
6382 ENUM
6383 BFD_RELOC_MT_GNU_VTENTRY
6384 ENUMDOC
6385 Morpho MT - Used to tell the linker which vtable entries are used.
6386 ENUM
6387 BFD_RELOC_MT_PCINSN8
6388 ENUMDOC
6389 Morpho MT - 8 bit immediate relocation.
6390
6391 ENUM
6392 BFD_RELOC_MSP430_10_PCREL
6393 ENUMX
6394 BFD_RELOC_MSP430_16_PCREL
6395 ENUMX
6396 BFD_RELOC_MSP430_16
6397 ENUMX
6398 BFD_RELOC_MSP430_16_PCREL_BYTE
6399 ENUMX
6400 BFD_RELOC_MSP430_16_BYTE
6401 ENUMX
6402 BFD_RELOC_MSP430_2X_PCREL
6403 ENUMX
6404 BFD_RELOC_MSP430_RL_PCREL
6405 ENUMX
6406 BFD_RELOC_MSP430_ABS8
6407 ENUMX
6408 BFD_RELOC_MSP430X_PCR20_EXT_SRC
6409 ENUMX
6410 BFD_RELOC_MSP430X_PCR20_EXT_DST
6411 ENUMX
6412 BFD_RELOC_MSP430X_PCR20_EXT_ODST
6413 ENUMX
6414 BFD_RELOC_MSP430X_ABS20_EXT_SRC
6415 ENUMX
6416 BFD_RELOC_MSP430X_ABS20_EXT_DST
6417 ENUMX
6418 BFD_RELOC_MSP430X_ABS20_EXT_ODST
6419 ENUMX
6420 BFD_RELOC_MSP430X_ABS20_ADR_SRC
6421 ENUMX
6422 BFD_RELOC_MSP430X_ABS20_ADR_DST
6423 ENUMX
6424 BFD_RELOC_MSP430X_PCR16
6425 ENUMX
6426 BFD_RELOC_MSP430X_PCR20_CALL
6427 ENUMX
6428 BFD_RELOC_MSP430X_ABS16
6429 ENUMX
6430 BFD_RELOC_MSP430_ABS_HI16
6431 ENUMX
6432 BFD_RELOC_MSP430_PREL31
6433 ENUMX
6434 BFD_RELOC_MSP430_SYM_DIFF
6435 ENUMDOC
6436 msp430 specific relocation codes
6437
6438 ENUM
6439 BFD_RELOC_NIOS2_S16
6440 ENUMX
6441 BFD_RELOC_NIOS2_U16
6442 ENUMX
6443 BFD_RELOC_NIOS2_CALL26
6444 ENUMX
6445 BFD_RELOC_NIOS2_IMM5
6446 ENUMX
6447 BFD_RELOC_NIOS2_CACHE_OPX
6448 ENUMX
6449 BFD_RELOC_NIOS2_IMM6
6450 ENUMX
6451 BFD_RELOC_NIOS2_IMM8
6452 ENUMX
6453 BFD_RELOC_NIOS2_HI16
6454 ENUMX
6455 BFD_RELOC_NIOS2_LO16
6456 ENUMX
6457 BFD_RELOC_NIOS2_HIADJ16
6458 ENUMX
6459 BFD_RELOC_NIOS2_GPREL
6460 ENUMX
6461 BFD_RELOC_NIOS2_UJMP
6462 ENUMX
6463 BFD_RELOC_NIOS2_CJMP
6464 ENUMX
6465 BFD_RELOC_NIOS2_CALLR
6466 ENUMX
6467 BFD_RELOC_NIOS2_ALIGN
6468 ENUMX
6469 BFD_RELOC_NIOS2_GOT16
6470 ENUMX
6471 BFD_RELOC_NIOS2_CALL16
6472 ENUMX
6473 BFD_RELOC_NIOS2_GOTOFF_LO
6474 ENUMX
6475 BFD_RELOC_NIOS2_GOTOFF_HA
6476 ENUMX
6477 BFD_RELOC_NIOS2_PCREL_LO
6478 ENUMX
6479 BFD_RELOC_NIOS2_PCREL_HA
6480 ENUMX
6481 BFD_RELOC_NIOS2_TLS_GD16
6482 ENUMX
6483 BFD_RELOC_NIOS2_TLS_LDM16
6484 ENUMX
6485 BFD_RELOC_NIOS2_TLS_LDO16
6486 ENUMX
6487 BFD_RELOC_NIOS2_TLS_IE16
6488 ENUMX
6489 BFD_RELOC_NIOS2_TLS_LE16
6490 ENUMX
6491 BFD_RELOC_NIOS2_TLS_DTPMOD
6492 ENUMX
6493 BFD_RELOC_NIOS2_TLS_DTPREL
6494 ENUMX
6495 BFD_RELOC_NIOS2_TLS_TPREL
6496 ENUMX
6497 BFD_RELOC_NIOS2_COPY
6498 ENUMX
6499 BFD_RELOC_NIOS2_GLOB_DAT
6500 ENUMX
6501 BFD_RELOC_NIOS2_JUMP_SLOT
6502 ENUMX
6503 BFD_RELOC_NIOS2_RELATIVE
6504 ENUMX
6505 BFD_RELOC_NIOS2_GOTOFF
6506 ENUMX
6507 BFD_RELOC_NIOS2_CALL26_NOAT
6508 ENUMX
6509 BFD_RELOC_NIOS2_GOT_LO
6510 ENUMX
6511 BFD_RELOC_NIOS2_GOT_HA
6512 ENUMX
6513 BFD_RELOC_NIOS2_CALL_LO
6514 ENUMX
6515 BFD_RELOC_NIOS2_CALL_HA
6516 ENUMX
6517 BFD_RELOC_NIOS2_R2_S12
6518 ENUMX
6519 BFD_RELOC_NIOS2_R2_I10_1_PCREL
6520 ENUMX
6521 BFD_RELOC_NIOS2_R2_T1I7_1_PCREL
6522 ENUMX
6523 BFD_RELOC_NIOS2_R2_T1I7_2
6524 ENUMX
6525 BFD_RELOC_NIOS2_R2_T2I4
6526 ENUMX
6527 BFD_RELOC_NIOS2_R2_T2I4_1
6528 ENUMX
6529 BFD_RELOC_NIOS2_R2_T2I4_2
6530 ENUMX
6531 BFD_RELOC_NIOS2_R2_X1I7_2
6532 ENUMX
6533 BFD_RELOC_NIOS2_R2_X2L5
6534 ENUMX
6535 BFD_RELOC_NIOS2_R2_F1I5_2
6536 ENUMX
6537 BFD_RELOC_NIOS2_R2_L5I4X1
6538 ENUMX
6539 BFD_RELOC_NIOS2_R2_T1X1I6
6540 ENUMX
6541 BFD_RELOC_NIOS2_R2_T1X1I6_2
6542 ENUMDOC
6543 Relocations used by the Altera Nios II core.
6544
6545 ENUM
6546 BFD_RELOC_PRU_U16
6547 ENUMDOC
6548 PRU LDI 16-bit unsigned data-memory relocation.
6549 ENUM
6550 BFD_RELOC_PRU_U16_PMEMIMM
6551 ENUMDOC
6552 PRU LDI 16-bit unsigned instruction-memory relocation.
6553 ENUM
6554 BFD_RELOC_PRU_LDI32
6555 ENUMDOC
6556 PRU relocation for two consecutive LDI load instructions that load a
6557 32 bit value into a register. If the higher bits are all zero, then
6558 the second instruction may be relaxed.
6559 ENUM
6560 BFD_RELOC_PRU_S10_PCREL
6561 ENUMDOC
6562 PRU QBBx 10-bit signed PC-relative relocation.
6563 ENUM
6564 BFD_RELOC_PRU_U8_PCREL
6565 ENUMDOC
6566 PRU 8-bit unsigned relocation used for the LOOP instruction.
6567 ENUM
6568 BFD_RELOC_PRU_32_PMEM
6569 ENUMX
6570 BFD_RELOC_PRU_16_PMEM
6571 ENUMDOC
6572 PRU Program Memory relocations. Used to convert from byte addressing to
6573 32-bit word addressing.
6574 ENUM
6575 BFD_RELOC_PRU_GNU_DIFF8
6576 ENUMX
6577 BFD_RELOC_PRU_GNU_DIFF16
6578 ENUMX
6579 BFD_RELOC_PRU_GNU_DIFF32
6580 ENUMX
6581 BFD_RELOC_PRU_GNU_DIFF16_PMEM
6582 ENUMX
6583 BFD_RELOC_PRU_GNU_DIFF32_PMEM
6584 ENUMDOC
6585 PRU relocations to mark the difference of two local symbols.
6586 These are only needed to support linker relaxation and can be ignored
6587 when not relaxing. The field is set to the value of the difference
6588 assuming no relaxation. The relocation encodes the position of the
6589 second symbol so the linker can determine whether to adjust the field
6590 value. The PMEM variants encode the word difference, instead of byte
6591 difference between symbols.
6592
6593 ENUM
6594 BFD_RELOC_IQ2000_OFFSET_16
6595 ENUMX
6596 BFD_RELOC_IQ2000_OFFSET_21
6597 ENUMX
6598 BFD_RELOC_IQ2000_UHI16
6599 ENUMDOC
6600 IQ2000 Relocations.
6601
6602 ENUM
6603 BFD_RELOC_XTENSA_RTLD
6604 ENUMDOC
6605 Special Xtensa relocation used only by PLT entries in ELF shared
6606 objects to indicate that the runtime linker should set the value
6607 to one of its own internal functions or data structures.
6608 ENUM
6609 BFD_RELOC_XTENSA_GLOB_DAT
6610 ENUMX
6611 BFD_RELOC_XTENSA_JMP_SLOT
6612 ENUMX
6613 BFD_RELOC_XTENSA_RELATIVE
6614 ENUMDOC
6615 Xtensa relocations for ELF shared objects.
6616 ENUM
6617 BFD_RELOC_XTENSA_PLT
6618 ENUMDOC
6619 Xtensa relocation used in ELF object files for symbols that may require
6620 PLT entries. Otherwise, this is just a generic 32-bit relocation.
6621 ENUM
6622 BFD_RELOC_XTENSA_DIFF8
6623 ENUMX
6624 BFD_RELOC_XTENSA_DIFF16
6625 ENUMX
6626 BFD_RELOC_XTENSA_DIFF32
6627 ENUMDOC
6628 Xtensa relocations to mark the difference of two local symbols.
6629 These are only needed to support linker relaxation and can be ignored
6630 when not relaxing. The field is set to the value of the difference
6631 assuming no relaxation. The relocation encodes the position of the
6632 first symbol so the linker can determine whether to adjust the field
6633 value.
6634 ENUM
6635 BFD_RELOC_XTENSA_SLOT0_OP
6636 ENUMX
6637 BFD_RELOC_XTENSA_SLOT1_OP
6638 ENUMX
6639 BFD_RELOC_XTENSA_SLOT2_OP
6640 ENUMX
6641 BFD_RELOC_XTENSA_SLOT3_OP
6642 ENUMX
6643 BFD_RELOC_XTENSA_SLOT4_OP
6644 ENUMX
6645 BFD_RELOC_XTENSA_SLOT5_OP
6646 ENUMX
6647 BFD_RELOC_XTENSA_SLOT6_OP
6648 ENUMX
6649 BFD_RELOC_XTENSA_SLOT7_OP
6650 ENUMX
6651 BFD_RELOC_XTENSA_SLOT8_OP
6652 ENUMX
6653 BFD_RELOC_XTENSA_SLOT9_OP
6654 ENUMX
6655 BFD_RELOC_XTENSA_SLOT10_OP
6656 ENUMX
6657 BFD_RELOC_XTENSA_SLOT11_OP
6658 ENUMX
6659 BFD_RELOC_XTENSA_SLOT12_OP
6660 ENUMX
6661 BFD_RELOC_XTENSA_SLOT13_OP
6662 ENUMX
6663 BFD_RELOC_XTENSA_SLOT14_OP
6664 ENUMDOC
6665 Generic Xtensa relocations for instruction operands. Only the slot
6666 number is encoded in the relocation. The relocation applies to the
6667 last PC-relative immediate operand, or if there are no PC-relative
6668 immediates, to the last immediate operand.
6669 ENUM
6670 BFD_RELOC_XTENSA_SLOT0_ALT
6671 ENUMX
6672 BFD_RELOC_XTENSA_SLOT1_ALT
6673 ENUMX
6674 BFD_RELOC_XTENSA_SLOT2_ALT
6675 ENUMX
6676 BFD_RELOC_XTENSA_SLOT3_ALT
6677 ENUMX
6678 BFD_RELOC_XTENSA_SLOT4_ALT
6679 ENUMX
6680 BFD_RELOC_XTENSA_SLOT5_ALT
6681 ENUMX
6682 BFD_RELOC_XTENSA_SLOT6_ALT
6683 ENUMX
6684 BFD_RELOC_XTENSA_SLOT7_ALT
6685 ENUMX
6686 BFD_RELOC_XTENSA_SLOT8_ALT
6687 ENUMX
6688 BFD_RELOC_XTENSA_SLOT9_ALT
6689 ENUMX
6690 BFD_RELOC_XTENSA_SLOT10_ALT
6691 ENUMX
6692 BFD_RELOC_XTENSA_SLOT11_ALT
6693 ENUMX
6694 BFD_RELOC_XTENSA_SLOT12_ALT
6695 ENUMX
6696 BFD_RELOC_XTENSA_SLOT13_ALT
6697 ENUMX
6698 BFD_RELOC_XTENSA_SLOT14_ALT
6699 ENUMDOC
6700 Alternate Xtensa relocations. Only the slot is encoded in the
6701 relocation. The meaning of these relocations is opcode-specific.
6702 ENUM
6703 BFD_RELOC_XTENSA_OP0
6704 ENUMX
6705 BFD_RELOC_XTENSA_OP1
6706 ENUMX
6707 BFD_RELOC_XTENSA_OP2
6708 ENUMDOC
6709 Xtensa relocations for backward compatibility. These have all been
6710 replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6711 ENUM
6712 BFD_RELOC_XTENSA_ASM_EXPAND
6713 ENUMDOC
6714 Xtensa relocation to mark that the assembler expanded the
6715 instructions from an original target. The expansion size is
6716 encoded in the reloc size.
6717 ENUM
6718 BFD_RELOC_XTENSA_ASM_SIMPLIFY
6719 ENUMDOC
6720 Xtensa relocation to mark that the linker should simplify
6721 assembler-expanded instructions. This is commonly used
6722 internally by the linker after analysis of a
6723 BFD_RELOC_XTENSA_ASM_EXPAND.
6724 ENUM
6725 BFD_RELOC_XTENSA_TLSDESC_FN
6726 ENUMX
6727 BFD_RELOC_XTENSA_TLSDESC_ARG
6728 ENUMX
6729 BFD_RELOC_XTENSA_TLS_DTPOFF
6730 ENUMX
6731 BFD_RELOC_XTENSA_TLS_TPOFF
6732 ENUMX
6733 BFD_RELOC_XTENSA_TLS_FUNC
6734 ENUMX
6735 BFD_RELOC_XTENSA_TLS_ARG
6736 ENUMX
6737 BFD_RELOC_XTENSA_TLS_CALL
6738 ENUMDOC
6739 Xtensa TLS relocations.
6740
6741 ENUM
6742 BFD_RELOC_Z80_DISP8
6743 ENUMDOC
6744 8 bit signed offset in (ix+d) or (iy+d).
6745
6746 ENUM
6747 BFD_RELOC_Z8K_DISP7
6748 ENUMDOC
6749 DJNZ offset.
6750 ENUM
6751 BFD_RELOC_Z8K_CALLR
6752 ENUMDOC
6753 CALR offset.
6754 ENUM
6755 BFD_RELOC_Z8K_IMM4L
6756 ENUMDOC
6757 4 bit value.
6758
6759 ENUM
6760 BFD_RELOC_LM32_CALL
6761 ENUMX
6762 BFD_RELOC_LM32_BRANCH
6763 ENUMX
6764 BFD_RELOC_LM32_16_GOT
6765 ENUMX
6766 BFD_RELOC_LM32_GOTOFF_HI16
6767 ENUMX
6768 BFD_RELOC_LM32_GOTOFF_LO16
6769 ENUMX
6770 BFD_RELOC_LM32_COPY
6771 ENUMX
6772 BFD_RELOC_LM32_GLOB_DAT
6773 ENUMX
6774 BFD_RELOC_LM32_JMP_SLOT
6775 ENUMX
6776 BFD_RELOC_LM32_RELATIVE
6777 ENUMDOC
6778 Lattice Mico32 relocations.
6779
6780 ENUM
6781 BFD_RELOC_MACH_O_SECTDIFF
6782 ENUMDOC
6783 Difference between two section addreses. Must be followed by a
6784 BFD_RELOC_MACH_O_PAIR.
6785 ENUM
6786 BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6787 ENUMDOC
6788 Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6789 ENUM
6790 BFD_RELOC_MACH_O_PAIR
6791 ENUMDOC
6792 Pair of relocation. Contains the first symbol.
6793 ENUM
6794 BFD_RELOC_MACH_O_SUBTRACTOR32
6795 ENUMDOC
6796 Symbol will be substracted. Must be followed by a BFD_RELOC_32.
6797 ENUM
6798 BFD_RELOC_MACH_O_SUBTRACTOR64
6799 ENUMDOC
6800 Symbol will be substracted. Must be followed by a BFD_RELOC_64.
6801
6802 ENUM
6803 BFD_RELOC_MACH_O_X86_64_BRANCH32
6804 ENUMX
6805 BFD_RELOC_MACH_O_X86_64_BRANCH8
6806 ENUMDOC
6807 PCREL relocations. They are marked as branch to create PLT entry if
6808 required.
6809 ENUM
6810 BFD_RELOC_MACH_O_X86_64_GOT
6811 ENUMDOC
6812 Used when referencing a GOT entry.
6813 ENUM
6814 BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6815 ENUMDOC
6816 Used when loading a GOT entry with movq. It is specially marked so that
6817 the linker could optimize the movq to a leaq if possible.
6818 ENUM
6819 BFD_RELOC_MACH_O_X86_64_PCREL32_1
6820 ENUMDOC
6821 Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6822 ENUM
6823 BFD_RELOC_MACH_O_X86_64_PCREL32_2
6824 ENUMDOC
6825 Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6826 ENUM
6827 BFD_RELOC_MACH_O_X86_64_PCREL32_4
6828 ENUMDOC
6829 Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6830 ENUM
6831 BFD_RELOC_MACH_O_X86_64_TLV
6832 ENUMDOC
6833 Used when referencing a TLV entry.
6834
6835
6836 ENUM
6837 BFD_RELOC_MACH_O_ARM64_ADDEND
6838 ENUMDOC
6839 Addend for PAGE or PAGEOFF.
6840 ENUM
6841 BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGE21
6842 ENUMDOC
6843 Relative offset to page of GOT slot.
6844 ENUM
6845 BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGEOFF12
6846 ENUMDOC
6847 Relative offset within page of GOT slot.
6848 ENUM
6849 BFD_RELOC_MACH_O_ARM64_POINTER_TO_GOT
6850 ENUMDOC
6851 Address of a GOT entry.
6852
6853 ENUM
6854 BFD_RELOC_MICROBLAZE_32_LO
6855 ENUMDOC
6856 This is a 32 bit reloc for the microblaze that stores the
6857 low 16 bits of a value
6858 ENUM
6859 BFD_RELOC_MICROBLAZE_32_LO_PCREL
6860 ENUMDOC
6861 This is a 32 bit pc-relative reloc for the microblaze that
6862 stores the low 16 bits of a value
6863 ENUM
6864 BFD_RELOC_MICROBLAZE_32_ROSDA
6865 ENUMDOC
6866 This is a 32 bit reloc for the microblaze that stores a
6867 value relative to the read-only small data area anchor
6868 ENUM
6869 BFD_RELOC_MICROBLAZE_32_RWSDA
6870 ENUMDOC
6871 This is a 32 bit reloc for the microblaze that stores a
6872 value relative to the read-write small data area anchor
6873 ENUM
6874 BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6875 ENUMDOC
6876 This is a 32 bit reloc for the microblaze to handle
6877 expressions of the form "Symbol Op Symbol"
6878 ENUM
6879 BFD_RELOC_MICROBLAZE_64_NONE
6880 ENUMDOC
6881 This is a 64 bit reloc that stores the 32 bit pc relative
6882 value in two words (with an imm instruction). No relocation is
6883 done here - only used for relaxing
6884 ENUM
6885 BFD_RELOC_MICROBLAZE_64_GOTPC
6886 ENUMDOC
6887 This is a 64 bit reloc that stores the 32 bit pc relative
6888 value in two words (with an imm instruction). The relocation is
6889 PC-relative GOT offset
6890 ENUM
6891 BFD_RELOC_MICROBLAZE_64_GOT
6892 ENUMDOC
6893 This is a 64 bit reloc that stores the 32 bit pc relative
6894 value in two words (with an imm instruction). The relocation is
6895 GOT offset
6896 ENUM
6897 BFD_RELOC_MICROBLAZE_64_PLT
6898 ENUMDOC
6899 This is a 64 bit reloc that stores the 32 bit pc relative
6900 value in two words (with an imm instruction). The relocation is
6901 PC-relative offset into PLT
6902 ENUM
6903 BFD_RELOC_MICROBLAZE_64_GOTOFF
6904 ENUMDOC
6905 This is a 64 bit reloc that stores the 32 bit GOT relative
6906 value in two words (with an imm instruction). The relocation is
6907 relative offset from _GLOBAL_OFFSET_TABLE_
6908 ENUM
6909 BFD_RELOC_MICROBLAZE_32_GOTOFF
6910 ENUMDOC
6911 This is a 32 bit reloc that stores the 32 bit GOT relative
6912 value in a word. The relocation is relative offset from
6913 _GLOBAL_OFFSET_TABLE_
6914 ENUM
6915 BFD_RELOC_MICROBLAZE_COPY
6916 ENUMDOC
6917 This is used to tell the dynamic linker to copy the value out of
6918 the dynamic object into the runtime process image.
6919 ENUM
6920 BFD_RELOC_MICROBLAZE_64_TLS
6921 ENUMDOC
6922 Unused Reloc
6923 ENUM
6924 BFD_RELOC_MICROBLAZE_64_TLSGD
6925 ENUMDOC
6926 This is a 64 bit reloc that stores the 32 bit GOT relative value
6927 of the GOT TLS GD info entry in two words (with an imm instruction). The
6928 relocation is GOT offset.
6929 ENUM
6930 BFD_RELOC_MICROBLAZE_64_TLSLD
6931 ENUMDOC
6932 This is a 64 bit reloc that stores the 32 bit GOT relative value
6933 of the GOT TLS LD info entry in two words (with an imm instruction). The
6934 relocation is GOT offset.
6935 ENUM
6936 BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6937 ENUMDOC
6938 This is a 32 bit reloc that stores the Module ID to GOT(n).
6939 ENUM
6940 BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6941 ENUMDOC
6942 This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6943 ENUM
6944 BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6945 ENUMDOC
6946 This is a 32 bit reloc for storing TLS offset to two words (uses imm
6947 instruction)
6948 ENUM
6949 BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6950 ENUMDOC
6951 This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6952 to two words (uses imm instruction).
6953 ENUM
6954 BFD_RELOC_MICROBLAZE_64_TLSTPREL
6955 ENUMDOC
6956 This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6957 to two words (uses imm instruction).
6958 ENUM
6959 BFD_RELOC_MICROBLAZE_64_TEXTPCREL
6960 ENUMDOC
6961 This is a 64 bit reloc that stores the 32 bit pc relative
6962 value in two words (with an imm instruction). The relocation is
6963 PC-relative offset from start of TEXT.
6964 ENUM
6965 BFD_RELOC_MICROBLAZE_64_TEXTREL
6966 ENUMDOC
6967 This is a 64 bit reloc that stores the 32 bit offset
6968 value in two words (with an imm instruction). The relocation is
6969 relative offset from start of TEXT.
6970
6971 ENUM
6972 BFD_RELOC_AARCH64_RELOC_START
6973 ENUMDOC
6974 AArch64 pseudo relocation code to mark the start of the AArch64
6975 relocation enumerators. N.B. the order of the enumerators is
6976 important as several tables in the AArch64 bfd backend are indexed
6977 by these enumerators; make sure they are all synced.
6978 ENUM
6979 BFD_RELOC_AARCH64_NULL
6980 ENUMDOC
6981 Deprecated AArch64 null relocation code.
6982 ENUM
6983 BFD_RELOC_AARCH64_NONE
6984 ENUMDOC
6985 AArch64 null relocation code.
6986 ENUM
6987 BFD_RELOC_AARCH64_64
6988 ENUMX
6989 BFD_RELOC_AARCH64_32
6990 ENUMX
6991 BFD_RELOC_AARCH64_16
6992 ENUMDOC
6993 Basic absolute relocations of N bits. These are equivalent to
6994 BFD_RELOC_N and they were added to assist the indexing of the howto
6995 table.
6996 ENUM
6997 BFD_RELOC_AARCH64_64_PCREL
6998 ENUMX
6999 BFD_RELOC_AARCH64_32_PCREL
7000 ENUMX
7001 BFD_RELOC_AARCH64_16_PCREL
7002 ENUMDOC
7003 PC-relative relocations. These are equivalent to BFD_RELOC_N_PCREL
7004 and they were added to assist the indexing of the howto table.
7005 ENUM
7006 BFD_RELOC_AARCH64_MOVW_G0
7007 ENUMDOC
7008 AArch64 MOV[NZK] instruction with most significant bits 0 to 15
7009 of an unsigned address/value.
7010 ENUM
7011 BFD_RELOC_AARCH64_MOVW_G0_NC
7012 ENUMDOC
7013 AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
7014 an address/value. No overflow checking.
7015 ENUM
7016 BFD_RELOC_AARCH64_MOVW_G1
7017 ENUMDOC
7018 AArch64 MOV[NZK] instruction with most significant bits 16 to 31
7019 of an unsigned address/value.
7020 ENUM
7021 BFD_RELOC_AARCH64_MOVW_G1_NC
7022 ENUMDOC
7023 AArch64 MOV[NZK] instruction with less significant bits 16 to 31
7024 of an address/value. No overflow checking.
7025 ENUM
7026 BFD_RELOC_AARCH64_MOVW_G2
7027 ENUMDOC
7028 AArch64 MOV[NZK] instruction with most significant bits 32 to 47
7029 of an unsigned address/value.
7030 ENUM
7031 BFD_RELOC_AARCH64_MOVW_G2_NC
7032 ENUMDOC
7033 AArch64 MOV[NZK] instruction with less significant bits 32 to 47
7034 of an address/value. No overflow checking.
7035 ENUM
7036 BFD_RELOC_AARCH64_MOVW_G3
7037 ENUMDOC
7038 AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
7039 of a signed or unsigned address/value.
7040 ENUM
7041 BFD_RELOC_AARCH64_MOVW_G0_S
7042 ENUMDOC
7043 AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7044 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7045 value's sign.
7046 ENUM
7047 BFD_RELOC_AARCH64_MOVW_G1_S
7048 ENUMDOC
7049 AArch64 MOV[NZ] instruction with most significant bits 16 to 31
7050 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7051 value's sign.
7052 ENUM
7053 BFD_RELOC_AARCH64_MOVW_G2_S
7054 ENUMDOC
7055 AArch64 MOV[NZ] instruction with most significant bits 32 to 47
7056 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7057 value's sign.
7058 ENUM
7059 BFD_RELOC_AARCH64_MOVW_PREL_G0
7060 ENUMDOC
7061 AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7062 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7063 value's sign.
7064 ENUM
7065 BFD_RELOC_AARCH64_MOVW_PREL_G0_NC
7066 ENUMDOC
7067 AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7068 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7069 value's sign.
7070 ENUM
7071 BFD_RELOC_AARCH64_MOVW_PREL_G1
7072 ENUMDOC
7073 AArch64 MOVK instruction with most significant bits 16 to 31
7074 of a signed value.
7075 ENUM
7076 BFD_RELOC_AARCH64_MOVW_PREL_G1_NC
7077 ENUMDOC
7078 AArch64 MOVK instruction with most significant bits 16 to 31
7079 of a signed value.
7080 ENUM
7081 BFD_RELOC_AARCH64_MOVW_PREL_G2
7082 ENUMDOC
7083 AArch64 MOVK instruction with most significant bits 32 to 47
7084 of a signed value.
7085 ENUM
7086 BFD_RELOC_AARCH64_MOVW_PREL_G2_NC
7087 ENUMDOC
7088 AArch64 MOVK instruction with most significant bits 32 to 47
7089 of a signed value.
7090 ENUM
7091 BFD_RELOC_AARCH64_MOVW_PREL_G3
7092 ENUMDOC
7093 AArch64 MOVK instruction with most significant bits 47 to 63
7094 of a signed value.
7095 ENUM
7096 BFD_RELOC_AARCH64_LD_LO19_PCREL
7097 ENUMDOC
7098 AArch64 Load Literal instruction, holding a 19 bit pc-relative word
7099 offset. The lowest two bits must be zero and are not stored in the
7100 instruction, giving a 21 bit signed byte offset.
7101 ENUM
7102 BFD_RELOC_AARCH64_ADR_LO21_PCREL
7103 ENUMDOC
7104 AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
7105 ENUM
7106 BFD_RELOC_AARCH64_ADR_HI21_PCREL
7107 ENUMDOC
7108 AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
7109 offset, giving a 4KB aligned page base address.
7110 ENUM
7111 BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
7112 ENUMDOC
7113 AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
7114 offset, giving a 4KB aligned page base address, but with no overflow
7115 checking.
7116 ENUM
7117 BFD_RELOC_AARCH64_ADD_LO12
7118 ENUMDOC
7119 AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
7120 Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7121 ENUM
7122 BFD_RELOC_AARCH64_LDST8_LO12
7123 ENUMDOC
7124 AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
7125 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7126 ENUM
7127 BFD_RELOC_AARCH64_TSTBR14
7128 ENUMDOC
7129 AArch64 14 bit pc-relative test bit and branch.
7130 The lowest two bits must be zero and are not stored in the instruction,
7131 giving a 16 bit signed byte offset.
7132 ENUM
7133 BFD_RELOC_AARCH64_BRANCH19
7134 ENUMDOC
7135 AArch64 19 bit pc-relative conditional branch and compare & branch.
7136 The lowest two bits must be zero and are not stored in the instruction,
7137 giving a 21 bit signed byte offset.
7138 ENUM
7139 BFD_RELOC_AARCH64_JUMP26
7140 ENUMDOC
7141 AArch64 26 bit pc-relative unconditional branch.
7142 The lowest two bits must be zero and are not stored in the instruction,
7143 giving a 28 bit signed byte offset.
7144 ENUM
7145 BFD_RELOC_AARCH64_CALL26
7146 ENUMDOC
7147 AArch64 26 bit pc-relative unconditional branch and link.
7148 The lowest two bits must be zero and are not stored in the instruction,
7149 giving a 28 bit signed byte offset.
7150 ENUM
7151 BFD_RELOC_AARCH64_LDST16_LO12
7152 ENUMDOC
7153 AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
7154 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7155 ENUM
7156 BFD_RELOC_AARCH64_LDST32_LO12
7157 ENUMDOC
7158 AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
7159 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7160 ENUM
7161 BFD_RELOC_AARCH64_LDST64_LO12
7162 ENUMDOC
7163 AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
7164 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7165 ENUM
7166 BFD_RELOC_AARCH64_LDST128_LO12
7167 ENUMDOC
7168 AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
7169 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7170 ENUM
7171 BFD_RELOC_AARCH64_GOT_LD_PREL19
7172 ENUMDOC
7173 AArch64 Load Literal instruction, holding a 19 bit PC relative word
7174 offset of the global offset table entry for a symbol. The lowest two
7175 bits must be zero and are not stored in the instruction, giving a 21
7176 bit signed byte offset. This relocation type requires signed overflow
7177 checking.
7178 ENUM
7179 BFD_RELOC_AARCH64_ADR_GOT_PAGE
7180 ENUMDOC
7181 Get to the page base of the global offset table entry for a symbol as
7182 part of an ADRP instruction using a 21 bit PC relative value.Used in
7183 conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
7184 ENUM
7185 BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
7186 ENUMDOC
7187 Unsigned 12 bit byte offset for 64 bit load/store from the page of
7188 the GOT entry for this symbol. Used in conjunction with
7189 BFD_RELOC_AARCH64_ADR_GOT_PAGE. Valid in LP64 ABI only.
7190 ENUM
7191 BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
7192 ENUMDOC
7193 Unsigned 12 bit byte offset for 32 bit load/store from the page of
7194 the GOT entry for this symbol. Used in conjunction with
7195 BFD_RELOC_AARCH64_ADR_GOT_PAGE. Valid in ILP32 ABI only.
7196 ENUM
7197 BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC
7198 ENUMDOC
7199 Unsigned 16 bit byte offset for 64 bit load/store from the GOT entry
7200 for this symbol. Valid in LP64 ABI only.
7201 ENUM
7202 BFD_RELOC_AARCH64_MOVW_GOTOFF_G1
7203 ENUMDOC
7204 Unsigned 16 bit byte higher offset for 64 bit load/store from the GOT entry
7205 for this symbol. Valid in LP64 ABI only.
7206 ENUM
7207 BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
7208 ENUMDOC
7209 Unsigned 15 bit byte offset for 64 bit load/store from the page of
7210 the GOT entry for this symbol. Valid in LP64 ABI only.
7211 ENUM
7212 BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14
7213 ENUMDOC
7214 Scaled 14 bit byte offset to the page base of the global offset table.
7215 ENUM
7216 BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15
7217 ENUMDOC
7218 Scaled 15 bit byte offset to the page base of the global offset table.
7219 ENUM
7220 BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
7221 ENUMDOC
7222 Get to the page base of the global offset table entry for a symbols
7223 tls_index structure as part of an adrp instruction using a 21 bit PC
7224 relative value. Used in conjunction with
7225 BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
7226 ENUM
7227 BFD_RELOC_AARCH64_TLSGD_ADR_PREL21
7228 ENUMDOC
7229 AArch64 TLS General Dynamic
7230 ENUM
7231 BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
7232 ENUMDOC
7233 Unsigned 12 bit byte offset to global offset table entry for a symbols
7234 tls_index structure. Used in conjunction with
7235 BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
7236 ENUM
7237 BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC
7238 ENUMDOC
7239 AArch64 TLS General Dynamic relocation.
7240 ENUM
7241 BFD_RELOC_AARCH64_TLSGD_MOVW_G1
7242 ENUMDOC
7243 AArch64 TLS General Dynamic relocation.
7244 ENUM
7245 BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
7246 ENUMDOC
7247 AArch64 TLS INITIAL EXEC relocation.
7248 ENUM
7249 BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
7250 ENUMDOC
7251 AArch64 TLS INITIAL EXEC relocation.
7252 ENUM
7253 BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
7254 ENUMDOC
7255 AArch64 TLS INITIAL EXEC relocation.
7256 ENUM
7257 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
7258 ENUMDOC
7259 AArch64 TLS INITIAL EXEC relocation.
7260 ENUM
7261 BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
7262 ENUMDOC
7263 AArch64 TLS INITIAL EXEC relocation.
7264 ENUM
7265 BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
7266 ENUMDOC
7267 AArch64 TLS INITIAL EXEC relocation.
7268 ENUM
7269 BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12
7270 ENUMDOC
7271 bit[23:12] of byte offset to module TLS base address.
7272 ENUM
7273 BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12
7274 ENUMDOC
7275 Unsigned 12 bit byte offset to module TLS base address.
7276 ENUM
7277 BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
7278 ENUMDOC
7279 No overflow check version of BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
7280 ENUM
7281 BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC
7282 ENUMDOC
7283 Unsigned 12 bit byte offset to global offset table entry for a symbols
7284 tls_index structure. Used in conjunction with
7285 BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
7286 ENUM
7287 BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21
7288 ENUMDOC
7289 GOT entry page address for AArch64 TLS Local Dynamic, used with ADRP
7290 instruction.
7291 ENUM
7292 BFD_RELOC_AARCH64_TLSLD_ADR_PREL21
7293 ENUMDOC
7294 GOT entry address for AArch64 TLS Local Dynamic, used with ADR instruction.
7295 ENUM
7296 BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12
7297 ENUMDOC
7298 bit[11:1] of byte offset to module TLS base address, encoded in ldst
7299 instructions.
7300 ENUM
7301 BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC
7302 ENUMDOC
7303 Similar as BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12, but no overflow check.
7304 ENUM
7305 BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12
7306 ENUMDOC
7307 bit[11:2] of byte offset to module TLS base address, encoded in ldst
7308 instructions.
7309 ENUM
7310 BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC
7311 ENUMDOC
7312 Similar as BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12, but no overflow check.
7313 ENUM
7314 BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12
7315 ENUMDOC
7316 bit[11:3] of byte offset to module TLS base address, encoded in ldst
7317 instructions.
7318 ENUM
7319 BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC
7320 ENUMDOC
7321 Similar as BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12, but no overflow check.
7322 ENUM
7323 BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12
7324 ENUMDOC
7325 bit[11:0] of byte offset to module TLS base address, encoded in ldst
7326 instructions.
7327 ENUM
7328 BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC
7329 ENUMDOC
7330 Similar as BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12, but no overflow check.
7331 ENUM
7332 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7333 ENUMDOC
7334 bit[15:0] of byte offset to module TLS base address.
7335 ENUM
7336 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC
7337 ENUMDOC
7338 No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7339 ENUM
7340 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7341 ENUMDOC
7342 bit[31:16] of byte offset to module TLS base address.
7343 ENUM
7344 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC
7345 ENUMDOC
7346 No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7347 ENUM
7348 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2
7349 ENUMDOC
7350 bit[47:32] of byte offset to module TLS base address.
7351 ENUM
7352 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
7353 ENUMDOC
7354 AArch64 TLS LOCAL EXEC relocation.
7355 ENUM
7356 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
7357 ENUMDOC
7358 AArch64 TLS LOCAL EXEC relocation.
7359 ENUM
7360 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
7361 ENUMDOC
7362 AArch64 TLS LOCAL EXEC relocation.
7363 ENUM
7364 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
7365 ENUMDOC
7366 AArch64 TLS LOCAL EXEC relocation.
7367 ENUM
7368 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
7369 ENUMDOC
7370 AArch64 TLS LOCAL EXEC relocation.
7371 ENUM
7372 BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
7373 ENUMDOC
7374 AArch64 TLS LOCAL EXEC relocation.
7375 ENUM
7376 BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
7377 ENUMDOC
7378 AArch64 TLS LOCAL EXEC relocation.
7379 ENUM
7380 BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
7381 ENUMDOC
7382 AArch64 TLS LOCAL EXEC relocation.
7383 ENUM
7384 BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12
7385 ENUMDOC
7386 bit[11:1] of byte offset to module TLS base address, encoded in ldst
7387 instructions.
7388 ENUM
7389 BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC
7390 ENUMDOC
7391 Similar as BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12, but no overflow check.
7392 ENUM
7393 BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12
7394 ENUMDOC
7395 bit[11:2] of byte offset to module TLS base address, encoded in ldst
7396 instructions.
7397 ENUM
7398 BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC
7399 ENUMDOC
7400 Similar as BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12, but no overflow check.
7401 ENUM
7402 BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12
7403 ENUMDOC
7404 bit[11:3] of byte offset to module TLS base address, encoded in ldst
7405 instructions.
7406 ENUM
7407 BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC
7408 ENUMDOC
7409 Similar as BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12, but no overflow check.
7410 ENUM
7411 BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12
7412 ENUMDOC
7413 bit[11:0] of byte offset to module TLS base address, encoded in ldst
7414 instructions.
7415 ENUM
7416 BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC
7417 ENUMDOC
7418 Similar as BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12, but no overflow check.
7419 ENUM
7420 BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
7421 ENUMDOC
7422 AArch64 TLS DESC relocation.
7423 ENUM
7424 BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
7425 ENUMDOC
7426 AArch64 TLS DESC relocation.
7427 ENUM
7428 BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
7429 ENUMDOC
7430 AArch64 TLS DESC relocation.
7431 ENUM
7432 BFD_RELOC_AARCH64_TLSDESC_LD64_LO12
7433 ENUMDOC
7434 AArch64 TLS DESC relocation.
7435 ENUM
7436 BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
7437 ENUMDOC
7438 AArch64 TLS DESC relocation.
7439 ENUM
7440 BFD_RELOC_AARCH64_TLSDESC_ADD_LO12
7441 ENUMDOC
7442 AArch64 TLS DESC relocation.
7443 ENUM
7444 BFD_RELOC_AARCH64_TLSDESC_OFF_G1
7445 ENUMDOC
7446 AArch64 TLS DESC relocation.
7447 ENUM
7448 BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
7449 ENUMDOC
7450 AArch64 TLS DESC relocation.
7451 ENUM
7452 BFD_RELOC_AARCH64_TLSDESC_LDR
7453 ENUMDOC
7454 AArch64 TLS DESC relocation.
7455 ENUM
7456 BFD_RELOC_AARCH64_TLSDESC_ADD
7457 ENUMDOC
7458 AArch64 TLS DESC relocation.
7459 ENUM
7460 BFD_RELOC_AARCH64_TLSDESC_CALL
7461 ENUMDOC
7462 AArch64 TLS DESC relocation.
7463 ENUM
7464 BFD_RELOC_AARCH64_COPY
7465 ENUMDOC
7466 AArch64 TLS relocation.
7467 ENUM
7468 BFD_RELOC_AARCH64_GLOB_DAT
7469 ENUMDOC
7470 AArch64 TLS relocation.
7471 ENUM
7472 BFD_RELOC_AARCH64_JUMP_SLOT
7473 ENUMDOC
7474 AArch64 TLS relocation.
7475 ENUM
7476 BFD_RELOC_AARCH64_RELATIVE
7477 ENUMDOC
7478 AArch64 TLS relocation.
7479 ENUM
7480 BFD_RELOC_AARCH64_TLS_DTPMOD
7481 ENUMDOC
7482 AArch64 TLS relocation.
7483 ENUM
7484 BFD_RELOC_AARCH64_TLS_DTPREL
7485 ENUMDOC
7486 AArch64 TLS relocation.
7487 ENUM
7488 BFD_RELOC_AARCH64_TLS_TPREL
7489 ENUMDOC
7490 AArch64 TLS relocation.
7491 ENUM
7492 BFD_RELOC_AARCH64_TLSDESC
7493 ENUMDOC
7494 AArch64 TLS relocation.
7495 ENUM
7496 BFD_RELOC_AARCH64_IRELATIVE
7497 ENUMDOC
7498 AArch64 support for STT_GNU_IFUNC.
7499 ENUM
7500 BFD_RELOC_AARCH64_RELOC_END
7501 ENUMDOC
7502 AArch64 pseudo relocation code to mark the end of the AArch64
7503 relocation enumerators that have direct mapping to ELF reloc codes.
7504 There are a few more enumerators after this one; those are mainly
7505 used by the AArch64 assembler for the internal fixup or to select
7506 one of the above enumerators.
7507 ENUM
7508 BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
7509 ENUMDOC
7510 AArch64 pseudo relocation code to be used internally by the AArch64
7511 assembler and not (currently) written to any object files.
7512 ENUM
7513 BFD_RELOC_AARCH64_LDST_LO12
7514 ENUMDOC
7515 AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
7516 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7517 ENUM
7518 BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12
7519 ENUMDOC
7520 AArch64 pseudo relocation code for TLS local dynamic mode. It's to be
7521 used internally by the AArch64 assembler and not (currently) written to
7522 any object files.
7523 ENUM
7524 BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12_NC
7525 ENUMDOC
7526 Similar as BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12, but no overflow check.
7527 ENUM
7528 BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12
7529 ENUMDOC
7530 AArch64 pseudo relocation code for TLS local exec mode. It's to be
7531 used internally by the AArch64 assembler and not (currently) written to
7532 any object files.
7533 ENUM
7534 BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12_NC
7535 ENUMDOC
7536 Similar as BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12, but no overflow check.
7537 ENUM
7538 BFD_RELOC_AARCH64_LD_GOT_LO12_NC
7539 ENUMDOC
7540 AArch64 pseudo relocation code to be used internally by the AArch64
7541 assembler and not (currently) written to any object files.
7542 ENUM
7543 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
7544 ENUMDOC
7545 AArch64 pseudo relocation code to be used internally by the AArch64
7546 assembler and not (currently) written to any object files.
7547 ENUM
7548 BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
7549 ENUMDOC
7550 AArch64 pseudo relocation code to be used internally by the AArch64
7551 assembler and not (currently) written to any object files.
7552 ENUM
7553 BFD_RELOC_TILEPRO_COPY
7554 ENUMX
7555 BFD_RELOC_TILEPRO_GLOB_DAT
7556 ENUMX
7557 BFD_RELOC_TILEPRO_JMP_SLOT
7558 ENUMX
7559 BFD_RELOC_TILEPRO_RELATIVE
7560 ENUMX
7561 BFD_RELOC_TILEPRO_BROFF_X1
7562 ENUMX
7563 BFD_RELOC_TILEPRO_JOFFLONG_X1
7564 ENUMX
7565 BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
7566 ENUMX
7567 BFD_RELOC_TILEPRO_IMM8_X0
7568 ENUMX
7569 BFD_RELOC_TILEPRO_IMM8_Y0
7570 ENUMX
7571 BFD_RELOC_TILEPRO_IMM8_X1
7572 ENUMX
7573 BFD_RELOC_TILEPRO_IMM8_Y1
7574 ENUMX
7575 BFD_RELOC_TILEPRO_DEST_IMM8_X1
7576 ENUMX
7577 BFD_RELOC_TILEPRO_MT_IMM15_X1
7578 ENUMX
7579 BFD_RELOC_TILEPRO_MF_IMM15_X1
7580 ENUMX
7581 BFD_RELOC_TILEPRO_IMM16_X0
7582 ENUMX
7583 BFD_RELOC_TILEPRO_IMM16_X1
7584 ENUMX
7585 BFD_RELOC_TILEPRO_IMM16_X0_LO
7586 ENUMX
7587 BFD_RELOC_TILEPRO_IMM16_X1_LO
7588 ENUMX
7589 BFD_RELOC_TILEPRO_IMM16_X0_HI
7590 ENUMX
7591 BFD_RELOC_TILEPRO_IMM16_X1_HI
7592 ENUMX
7593 BFD_RELOC_TILEPRO_IMM16_X0_HA
7594 ENUMX
7595 BFD_RELOC_TILEPRO_IMM16_X1_HA
7596 ENUMX
7597 BFD_RELOC_TILEPRO_IMM16_X0_PCREL
7598 ENUMX
7599 BFD_RELOC_TILEPRO_IMM16_X1_PCREL
7600 ENUMX
7601 BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
7602 ENUMX
7603 BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
7604 ENUMX
7605 BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
7606 ENUMX
7607 BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
7608 ENUMX
7609 BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
7610 ENUMX
7611 BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
7612 ENUMX
7613 BFD_RELOC_TILEPRO_IMM16_X0_GOT
7614 ENUMX
7615 BFD_RELOC_TILEPRO_IMM16_X1_GOT
7616 ENUMX
7617 BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
7618 ENUMX
7619 BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
7620 ENUMX
7621 BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
7622 ENUMX
7623 BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
7624 ENUMX
7625 BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
7626 ENUMX
7627 BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
7628 ENUMX
7629 BFD_RELOC_TILEPRO_MMSTART_X0
7630 ENUMX
7631 BFD_RELOC_TILEPRO_MMEND_X0
7632 ENUMX
7633 BFD_RELOC_TILEPRO_MMSTART_X1
7634 ENUMX
7635 BFD_RELOC_TILEPRO_MMEND_X1
7636 ENUMX
7637 BFD_RELOC_TILEPRO_SHAMT_X0
7638 ENUMX
7639 BFD_RELOC_TILEPRO_SHAMT_X1
7640 ENUMX
7641 BFD_RELOC_TILEPRO_SHAMT_Y0
7642 ENUMX
7643 BFD_RELOC_TILEPRO_SHAMT_Y1
7644 ENUMX
7645 BFD_RELOC_TILEPRO_TLS_GD_CALL
7646 ENUMX
7647 BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
7648 ENUMX
7649 BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
7650 ENUMX
7651 BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
7652 ENUMX
7653 BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
7654 ENUMX
7655 BFD_RELOC_TILEPRO_TLS_IE_LOAD
7656 ENUMX
7657 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
7658 ENUMX
7659 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
7660 ENUMX
7661 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
7662 ENUMX
7663 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
7664 ENUMX
7665 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
7666 ENUMX
7667 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
7668 ENUMX
7669 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
7670 ENUMX
7671 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
7672 ENUMX
7673 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
7674 ENUMX
7675 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
7676 ENUMX
7677 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
7678 ENUMX
7679 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
7680 ENUMX
7681 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
7682 ENUMX
7683 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
7684 ENUMX
7685 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
7686 ENUMX
7687 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
7688 ENUMX
7689 BFD_RELOC_TILEPRO_TLS_DTPMOD32
7690 ENUMX
7691 BFD_RELOC_TILEPRO_TLS_DTPOFF32
7692 ENUMX
7693 BFD_RELOC_TILEPRO_TLS_TPOFF32
7694 ENUMX
7695 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7696 ENUMX
7697 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7698 ENUMX
7699 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7700 ENUMX
7701 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7702 ENUMX
7703 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7704 ENUMX
7705 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7706 ENUMX
7707 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7708 ENUMX
7709 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7710 ENUMDOC
7711 Tilera TILEPro Relocations.
7712 ENUM
7713 BFD_RELOC_TILEGX_HW0
7714 ENUMX
7715 BFD_RELOC_TILEGX_HW1
7716 ENUMX
7717 BFD_RELOC_TILEGX_HW2
7718 ENUMX
7719 BFD_RELOC_TILEGX_HW3
7720 ENUMX
7721 BFD_RELOC_TILEGX_HW0_LAST
7722 ENUMX
7723 BFD_RELOC_TILEGX_HW1_LAST
7724 ENUMX
7725 BFD_RELOC_TILEGX_HW2_LAST
7726 ENUMX
7727 BFD_RELOC_TILEGX_COPY
7728 ENUMX
7729 BFD_RELOC_TILEGX_GLOB_DAT
7730 ENUMX
7731 BFD_RELOC_TILEGX_JMP_SLOT
7732 ENUMX
7733 BFD_RELOC_TILEGX_RELATIVE
7734 ENUMX
7735 BFD_RELOC_TILEGX_BROFF_X1
7736 ENUMX
7737 BFD_RELOC_TILEGX_JUMPOFF_X1
7738 ENUMX
7739 BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7740 ENUMX
7741 BFD_RELOC_TILEGX_IMM8_X0
7742 ENUMX
7743 BFD_RELOC_TILEGX_IMM8_Y0
7744 ENUMX
7745 BFD_RELOC_TILEGX_IMM8_X1
7746 ENUMX
7747 BFD_RELOC_TILEGX_IMM8_Y1
7748 ENUMX
7749 BFD_RELOC_TILEGX_DEST_IMM8_X1
7750 ENUMX
7751 BFD_RELOC_TILEGX_MT_IMM14_X1
7752 ENUMX
7753 BFD_RELOC_TILEGX_MF_IMM14_X1
7754 ENUMX
7755 BFD_RELOC_TILEGX_MMSTART_X0
7756 ENUMX
7757 BFD_RELOC_TILEGX_MMEND_X0
7758 ENUMX
7759 BFD_RELOC_TILEGX_SHAMT_X0
7760 ENUMX
7761 BFD_RELOC_TILEGX_SHAMT_X1
7762 ENUMX
7763 BFD_RELOC_TILEGX_SHAMT_Y0
7764 ENUMX
7765 BFD_RELOC_TILEGX_SHAMT_Y1
7766 ENUMX
7767 BFD_RELOC_TILEGX_IMM16_X0_HW0
7768 ENUMX
7769 BFD_RELOC_TILEGX_IMM16_X1_HW0
7770 ENUMX
7771 BFD_RELOC_TILEGX_IMM16_X0_HW1
7772 ENUMX
7773 BFD_RELOC_TILEGX_IMM16_X1_HW1
7774 ENUMX
7775 BFD_RELOC_TILEGX_IMM16_X0_HW2
7776 ENUMX
7777 BFD_RELOC_TILEGX_IMM16_X1_HW2
7778 ENUMX
7779 BFD_RELOC_TILEGX_IMM16_X0_HW3
7780 ENUMX
7781 BFD_RELOC_TILEGX_IMM16_X1_HW3
7782 ENUMX
7783 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7784 ENUMX
7785 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7786 ENUMX
7787 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7788 ENUMX
7789 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7790 ENUMX
7791 BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7792 ENUMX
7793 BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7794 ENUMX
7795 BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7796 ENUMX
7797 BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7798 ENUMX
7799 BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7800 ENUMX
7801 BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7802 ENUMX
7803 BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7804 ENUMX
7805 BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7806 ENUMX
7807 BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7808 ENUMX
7809 BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7810 ENUMX
7811 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7812 ENUMX
7813 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7814 ENUMX
7815 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7816 ENUMX
7817 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7818 ENUMX
7819 BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7820 ENUMX
7821 BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7822 ENUMX
7823 BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7824 ENUMX
7825 BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7826 ENUMX
7827 BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7828 ENUMX
7829 BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7830 ENUMX
7831 BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7832 ENUMX
7833 BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7834 ENUMX
7835 BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7836 ENUMX
7837 BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7838 ENUMX
7839 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7840 ENUMX
7841 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7842 ENUMX
7843 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7844 ENUMX
7845 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7846 ENUMX
7847 BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7848 ENUMX
7849 BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7850 ENUMX
7851 BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7852 ENUMX
7853 BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7854 ENUMX
7855 BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7856 ENUMX
7857 BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7858 ENUMX
7859 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7860 ENUMX
7861 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7862 ENUMX
7863 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7864 ENUMX
7865 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7866 ENUMX
7867 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7868 ENUMX
7869 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7870 ENUMX
7871 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7872 ENUMX
7873 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7874 ENUMX
7875 BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7876 ENUMX
7877 BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7878 ENUMX
7879 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7880 ENUMX
7881 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7882 ENUMX
7883 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7884 ENUMX
7885 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7886 ENUMX
7887 BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7888 ENUMX
7889 BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7890 ENUMX
7891 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7892 ENUMX
7893 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7894 ENUMX
7895 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7896 ENUMX
7897 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7898 ENUMX
7899 BFD_RELOC_TILEGX_TLS_DTPMOD64
7900 ENUMX
7901 BFD_RELOC_TILEGX_TLS_DTPOFF64
7902 ENUMX
7903 BFD_RELOC_TILEGX_TLS_TPOFF64
7904 ENUMX
7905 BFD_RELOC_TILEGX_TLS_DTPMOD32
7906 ENUMX
7907 BFD_RELOC_TILEGX_TLS_DTPOFF32
7908 ENUMX
7909 BFD_RELOC_TILEGX_TLS_TPOFF32
7910 ENUMX
7911 BFD_RELOC_TILEGX_TLS_GD_CALL
7912 ENUMX
7913 BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7914 ENUMX
7915 BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7916 ENUMX
7917 BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7918 ENUMX
7919 BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7920 ENUMX
7921 BFD_RELOC_TILEGX_TLS_IE_LOAD
7922 ENUMX
7923 BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7924 ENUMX
7925 BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7926 ENUMX
7927 BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7928 ENUMX
7929 BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7930 ENUMDOC
7931 Tilera TILE-Gx Relocations.
7932
7933 ENUM
7934 BFD_RELOC_BPF_64
7935 ENUMX
7936 BFD_RELOC_BPF_32
7937 ENUMX
7938 BFD_RELOC_BPF_16
7939 ENUMX
7940 BFD_RELOC_BPF_DISP16
7941 ENUMX
7942 BFD_RELOC_BPF_DISP32
7943 ENUMDOC
7944 Linux eBPF relocations.
7945
7946 ENUM
7947 BFD_RELOC_EPIPHANY_SIMM8
7948 ENUMDOC
7949 Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7950 ENUM
7951 BFD_RELOC_EPIPHANY_SIMM24
7952 ENUMDOC
7953 Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7954 ENUM
7955 BFD_RELOC_EPIPHANY_HIGH
7956 ENUMDOC
7957 Adapteva EPIPHANY - 16 most-significant bits of absolute address
7958 ENUM
7959 BFD_RELOC_EPIPHANY_LOW
7960 ENUMDOC
7961 Adapteva EPIPHANY - 16 least-significant bits of absolute address
7962 ENUM
7963 BFD_RELOC_EPIPHANY_SIMM11
7964 ENUMDOC
7965 Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7966 ENUM
7967 BFD_RELOC_EPIPHANY_IMM11
7968 ENUMDOC
7969 Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7970 ENUM
7971 BFD_RELOC_EPIPHANY_IMM8
7972 ENUMDOC
7973 Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7974
7975 ENUM
7976 BFD_RELOC_VISIUM_HI16
7977 ENUMX
7978 BFD_RELOC_VISIUM_LO16
7979 ENUMX
7980 BFD_RELOC_VISIUM_IM16
7981 ENUMX
7982 BFD_RELOC_VISIUM_REL16
7983 ENUMX
7984 BFD_RELOC_VISIUM_HI16_PCREL
7985 ENUMX
7986 BFD_RELOC_VISIUM_LO16_PCREL
7987 ENUMX
7988 BFD_RELOC_VISIUM_IM16_PCREL
7989 ENUMDOC
7990 Visium Relocations.
7991
7992 ENUM
7993 BFD_RELOC_WASM32_LEB128
7994 ENUMX
7995 BFD_RELOC_WASM32_LEB128_GOT
7996 ENUMX
7997 BFD_RELOC_WASM32_LEB128_GOT_CODE
7998 ENUMX
7999 BFD_RELOC_WASM32_LEB128_PLT
8000 ENUMX
8001 BFD_RELOC_WASM32_PLT_INDEX
8002 ENUMX
8003 BFD_RELOC_WASM32_ABS32_CODE
8004 ENUMX
8005 BFD_RELOC_WASM32_COPY
8006 ENUMX
8007 BFD_RELOC_WASM32_CODE_POINTER
8008 ENUMX
8009 BFD_RELOC_WASM32_INDEX
8010 ENUMX
8011 BFD_RELOC_WASM32_PLT_SIG
8012 ENUMDOC
8013 WebAssembly relocations.
8014
8015 ENUM
8016 BFD_RELOC_CKCORE_NONE
8017 ENUMX
8018 BFD_RELOC_CKCORE_ADDR32
8019 ENUMX
8020 BFD_RELOC_CKCORE_PCREL_IMM8BY4
8021 ENUMX
8022 BFD_RELOC_CKCORE_PCREL_IMM11BY2
8023 ENUMX
8024 BFD_RELOC_CKCORE_PCREL_IMM4BY2
8025 ENUMX
8026 BFD_RELOC_CKCORE_PCREL32
8027 ENUMX
8028 BFD_RELOC_CKCORE_PCREL_JSR_IMM11BY2
8029 ENUMX
8030 BFD_RELOC_CKCORE_GNU_VTINHERIT
8031 ENUMX
8032 BFD_RELOC_CKCORE_GNU_VTENTRY
8033 ENUMX
8034 BFD_RELOC_CKCORE_RELATIVE
8035 ENUMX
8036 BFD_RELOC_CKCORE_COPY
8037 ENUMX
8038 BFD_RELOC_CKCORE_GLOB_DAT
8039 ENUMX
8040 BFD_RELOC_CKCORE_JUMP_SLOT
8041 ENUMX
8042 BFD_RELOC_CKCORE_GOTOFF
8043 ENUMX
8044 BFD_RELOC_CKCORE_GOTPC
8045 ENUMX
8046 BFD_RELOC_CKCORE_GOT32
8047 ENUMX
8048 BFD_RELOC_CKCORE_PLT32
8049 ENUMX
8050 BFD_RELOC_CKCORE_ADDRGOT
8051 ENUMX
8052 BFD_RELOC_CKCORE_ADDRPLT
8053 ENUMX
8054 BFD_RELOC_CKCORE_PCREL_IMM26BY2
8055 ENUMX
8056 BFD_RELOC_CKCORE_PCREL_IMM16BY2
8057 ENUMX
8058 BFD_RELOC_CKCORE_PCREL_IMM16BY4
8059 ENUMX
8060 BFD_RELOC_CKCORE_PCREL_IMM10BY2
8061 ENUMX
8062 BFD_RELOC_CKCORE_PCREL_IMM10BY4
8063 ENUMX
8064 BFD_RELOC_CKCORE_ADDR_HI16
8065 ENUMX
8066 BFD_RELOC_CKCORE_ADDR_LO16
8067 ENUMX
8068 BFD_RELOC_CKCORE_GOTPC_HI16
8069 ENUMX
8070 BFD_RELOC_CKCORE_GOTPC_LO16
8071 ENUMX
8072 BFD_RELOC_CKCORE_GOTOFF_HI16
8073 ENUMX
8074 BFD_RELOC_CKCORE_GOTOFF_LO16
8075 ENUMX
8076 BFD_RELOC_CKCORE_GOT12
8077 ENUMX
8078 BFD_RELOC_CKCORE_GOT_HI16
8079 ENUMX
8080 BFD_RELOC_CKCORE_GOT_LO16
8081 ENUMX
8082 BFD_RELOC_CKCORE_PLT12
8083 ENUMX
8084 BFD_RELOC_CKCORE_PLT_HI16
8085 ENUMX
8086 BFD_RELOC_CKCORE_PLT_LO16
8087 ENUMX
8088 BFD_RELOC_CKCORE_ADDRGOT_HI16
8089 ENUMX
8090 BFD_RELOC_CKCORE_ADDRGOT_LO16
8091 ENUMX
8092 BFD_RELOC_CKCORE_ADDRPLT_HI16
8093 ENUMX
8094 BFD_RELOC_CKCORE_ADDRPLT_LO16
8095 ENUMX
8096 BFD_RELOC_CKCORE_PCREL_JSR_IMM26BY2
8097 ENUMX
8098 BFD_RELOC_CKCORE_TOFFSET_LO16
8099 ENUMX
8100 BFD_RELOC_CKCORE_DOFFSET_LO16
8101 ENUMX
8102 BFD_RELOC_CKCORE_PCREL_IMM18BY2
8103 ENUMX
8104 BFD_RELOC_CKCORE_DOFFSET_IMM18
8105 ENUMX
8106 BFD_RELOC_CKCORE_DOFFSET_IMM18BY2
8107 ENUMX
8108 BFD_RELOC_CKCORE_DOFFSET_IMM18BY4
8109 ENUMX
8110 BFD_RELOC_CKCORE_GOTOFF_IMM18
8111 ENUMX
8112 BFD_RELOC_CKCORE_GOT_IMM18BY4
8113 ENUMX
8114 BFD_RELOC_CKCORE_PLT_IMM18BY4
8115 ENUMX
8116 BFD_RELOC_CKCORE_PCREL_IMM7BY4
8117 ENUMX
8118 BFD_RELOC_CKCORE_TLS_LE32
8119 ENUMX
8120 BFD_RELOC_CKCORE_TLS_IE32
8121 ENUMX
8122 BFD_RELOC_CKCORE_TLS_GD32
8123 ENUMX
8124 BFD_RELOC_CKCORE_TLS_LDM32
8125 ENUMX
8126 BFD_RELOC_CKCORE_TLS_LDO32
8127 ENUMX
8128 BFD_RELOC_CKCORE_TLS_DTPMOD32
8129 ENUMX
8130 BFD_RELOC_CKCORE_TLS_DTPOFF32
8131 ENUMX
8132 BFD_RELOC_CKCORE_TLS_TPOFF32
8133 ENUMX
8134 BFD_RELOC_CKCORE_PCREL_FLRW_IMM8BY4
8135 ENUMX
8136 BFD_RELOC_CKCORE_NOJSRI
8137 ENUMX
8138 BFD_RELOC_CKCORE_CALLGRAPH
8139 ENUMX
8140 BFD_RELOC_CKCORE_IRELATIVE
8141 ENUMX
8142 BFD_RELOC_CKCORE_PCREL_BLOOP_IMM4BY4
8143 ENUMX
8144 BFD_RELOC_CKCORE_PCREL_BLOOP_IMM12BY4
8145 ENUMDOC
8146 C-SKY relocations.
8147
8148 ENUM
8149 BFD_RELOC_S12Z_OPR
8150 ENUMDOC
8151 S12Z relocations.
8152
8153 ENDSENUM
8154 BFD_RELOC_UNUSED
8155 CODE_FRAGMENT
8156 .
8157 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
8158 */
8159
8160 /*
8161 FUNCTION
8162 bfd_reloc_type_lookup
8163 bfd_reloc_name_lookup
8164
8165 SYNOPSIS
8166 reloc_howto_type *bfd_reloc_type_lookup
8167 (bfd *abfd, bfd_reloc_code_real_type code);
8168 reloc_howto_type *bfd_reloc_name_lookup
8169 (bfd *abfd, const char *reloc_name);
8170
8171 DESCRIPTION
8172 Return a pointer to a howto structure which, when
8173 invoked, will perform the relocation @var{code} on data from the
8174 architecture noted.
8175
8176 */
8177
8178 reloc_howto_type *
8179 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
8180 {
8181 return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
8182 }
8183
8184 reloc_howto_type *
8185 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
8186 {
8187 return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
8188 }
8189
8190 static reloc_howto_type bfd_howto_32 =
8191 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
8192
8193 /*
8194 INTERNAL_FUNCTION
8195 bfd_default_reloc_type_lookup
8196
8197 SYNOPSIS
8198 reloc_howto_type *bfd_default_reloc_type_lookup
8199 (bfd *abfd, bfd_reloc_code_real_type code);
8200
8201 DESCRIPTION
8202 Provides a default relocation lookup routine for any architecture.
8203
8204 */
8205
8206 reloc_howto_type *
8207 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
8208 {
8209 switch (code)
8210 {
8211 case BFD_RELOC_CTOR:
8212 /* The type of reloc used in a ctor, which will be as wide as the
8213 address - so either a 64, 32, or 16 bitter. */
8214 switch (bfd_arch_bits_per_address (abfd))
8215 {
8216 case 64:
8217 BFD_FAIL ();
8218 break;
8219 case 32:
8220 return &bfd_howto_32;
8221 case 16:
8222 BFD_FAIL ();
8223 break;
8224 default:
8225 BFD_FAIL ();
8226 }
8227 break;
8228 default:
8229 BFD_FAIL ();
8230 }
8231 return NULL;
8232 }
8233
8234 /*
8235 FUNCTION
8236 bfd_get_reloc_code_name
8237
8238 SYNOPSIS
8239 const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
8240
8241 DESCRIPTION
8242 Provides a printable name for the supplied relocation code.
8243 Useful mainly for printing error messages.
8244 */
8245
8246 const char *
8247 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
8248 {
8249 if (code > BFD_RELOC_UNUSED)
8250 return 0;
8251 return bfd_reloc_code_real_names[code];
8252 }
8253
8254 /*
8255 INTERNAL_FUNCTION
8256 bfd_generic_relax_section
8257
8258 SYNOPSIS
8259 bfd_boolean bfd_generic_relax_section
8260 (bfd *abfd,
8261 asection *section,
8262 struct bfd_link_info *,
8263 bfd_boolean *);
8264
8265 DESCRIPTION
8266 Provides default handling for relaxing for back ends which
8267 don't do relaxing.
8268 */
8269
8270 bfd_boolean
8271 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
8272 asection *section ATTRIBUTE_UNUSED,
8273 struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
8274 bfd_boolean *again)
8275 {
8276 if (bfd_link_relocatable (link_info))
8277 (*link_info->callbacks->einfo)
8278 (_("%P%F: --relax and -r may not be used together\n"));
8279
8280 *again = FALSE;
8281 return TRUE;
8282 }
8283
8284 /*
8285 INTERNAL_FUNCTION
8286 bfd_generic_gc_sections
8287
8288 SYNOPSIS
8289 bfd_boolean bfd_generic_gc_sections
8290 (bfd *, struct bfd_link_info *);
8291
8292 DESCRIPTION
8293 Provides default handling for relaxing for back ends which
8294 don't do section gc -- i.e., does nothing.
8295 */
8296
8297 bfd_boolean
8298 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
8299 struct bfd_link_info *info ATTRIBUTE_UNUSED)
8300 {
8301 return TRUE;
8302 }
8303
8304 /*
8305 INTERNAL_FUNCTION
8306 bfd_generic_lookup_section_flags
8307
8308 SYNOPSIS
8309 bfd_boolean bfd_generic_lookup_section_flags
8310 (struct bfd_link_info *, struct flag_info *, asection *);
8311
8312 DESCRIPTION
8313 Provides default handling for section flags lookup
8314 -- i.e., does nothing.
8315 Returns FALSE if the section should be omitted, otherwise TRUE.
8316 */
8317
8318 bfd_boolean
8319 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
8320 struct flag_info *flaginfo,
8321 asection *section ATTRIBUTE_UNUSED)
8322 {
8323 if (flaginfo != NULL)
8324 {
8325 _bfd_error_handler (_("INPUT_SECTION_FLAGS are not supported"));
8326 return FALSE;
8327 }
8328 return TRUE;
8329 }
8330
8331 /*
8332 INTERNAL_FUNCTION
8333 bfd_generic_merge_sections
8334
8335 SYNOPSIS
8336 bfd_boolean bfd_generic_merge_sections
8337 (bfd *, struct bfd_link_info *);
8338
8339 DESCRIPTION
8340 Provides default handling for SEC_MERGE section merging for back ends
8341 which don't have SEC_MERGE support -- i.e., does nothing.
8342 */
8343
8344 bfd_boolean
8345 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
8346 struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
8347 {
8348 return TRUE;
8349 }
8350
8351 /*
8352 INTERNAL_FUNCTION
8353 bfd_generic_get_relocated_section_contents
8354
8355 SYNOPSIS
8356 bfd_byte *bfd_generic_get_relocated_section_contents
8357 (bfd *abfd,
8358 struct bfd_link_info *link_info,
8359 struct bfd_link_order *link_order,
8360 bfd_byte *data,
8361 bfd_boolean relocatable,
8362 asymbol **symbols);
8363
8364 DESCRIPTION
8365 Provides default handling of relocation effort for back ends
8366 which can't be bothered to do it efficiently.
8367
8368 */
8369
8370 bfd_byte *
8371 bfd_generic_get_relocated_section_contents (bfd *abfd,
8372 struct bfd_link_info *link_info,
8373 struct bfd_link_order *link_order,
8374 bfd_byte *data,
8375 bfd_boolean relocatable,
8376 asymbol **symbols)
8377 {
8378 bfd *input_bfd = link_order->u.indirect.section->owner;
8379 asection *input_section = link_order->u.indirect.section;
8380 long reloc_size;
8381 arelent **reloc_vector;
8382 long reloc_count;
8383
8384 reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
8385 if (reloc_size < 0)
8386 return NULL;
8387
8388 /* Read in the section. */
8389 if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
8390 return NULL;
8391
8392 if (data == NULL)
8393 return NULL;
8394
8395 if (reloc_size == 0)
8396 return data;
8397
8398 reloc_vector = (arelent **) bfd_malloc (reloc_size);
8399 if (reloc_vector == NULL)
8400 return NULL;
8401
8402 reloc_count = bfd_canonicalize_reloc (input_bfd,
8403 input_section,
8404 reloc_vector,
8405 symbols);
8406 if (reloc_count < 0)
8407 goto error_return;
8408
8409 if (reloc_count > 0)
8410 {
8411 arelent **parent;
8412
8413 for (parent = reloc_vector; *parent != NULL; parent++)
8414 {
8415 char *error_message = NULL;
8416 asymbol *symbol;
8417 bfd_reloc_status_type r;
8418
8419 symbol = *(*parent)->sym_ptr_ptr;
8420 /* PR ld/19628: A specially crafted input file
8421 can result in a NULL symbol pointer here. */
8422 if (symbol == NULL)
8423 {
8424 link_info->callbacks->einfo
8425 /* xgettext:c-format */
8426 (_("%X%P: %pB(%pA): error: relocation for offset %V has no value\n"),
8427 abfd, input_section, (* parent)->address);
8428 goto error_return;
8429 }
8430
8431 /* Zap reloc field when the symbol is from a discarded
8432 section, ignoring any addend. Do the same when called
8433 from bfd_simple_get_relocated_section_contents for
8434 undefined symbols in debug sections. This is to keep
8435 debug info reasonably sane, in particular so that
8436 DW_FORM_ref_addr to another file's .debug_info isn't
8437 confused with an offset into the current file's
8438 .debug_info. */
8439 if ((symbol->section != NULL && discarded_section (symbol->section))
8440 || (symbol->section == bfd_und_section_ptr
8441 && (input_section->flags & SEC_DEBUGGING) != 0
8442 && link_info->input_bfds == link_info->output_bfd))
8443 {
8444 bfd_vma off;
8445 static reloc_howto_type none_howto
8446 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
8447 "unused", FALSE, 0, 0, FALSE);
8448
8449 off = (*parent)->address * bfd_octets_per_byte (input_bfd);
8450 _bfd_clear_contents ((*parent)->howto, input_bfd,
8451 input_section, data, off);
8452 (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
8453 (*parent)->addend = 0;
8454 (*parent)->howto = &none_howto;
8455 r = bfd_reloc_ok;
8456 }
8457 else
8458 r = bfd_perform_relocation (input_bfd,
8459 *parent,
8460 data,
8461 input_section,
8462 relocatable ? abfd : NULL,
8463 &error_message);
8464
8465 if (relocatable)
8466 {
8467 asection *os = input_section->output_section;
8468
8469 /* A partial link, so keep the relocs. */
8470 os->orelocation[os->reloc_count] = *parent;
8471 os->reloc_count++;
8472 }
8473
8474 if (r != bfd_reloc_ok)
8475 {
8476 switch (r)
8477 {
8478 case bfd_reloc_undefined:
8479 (*link_info->callbacks->undefined_symbol)
8480 (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8481 input_bfd, input_section, (*parent)->address, TRUE);
8482 break;
8483 case bfd_reloc_dangerous:
8484 BFD_ASSERT (error_message != NULL);
8485 (*link_info->callbacks->reloc_dangerous)
8486 (link_info, error_message,
8487 input_bfd, input_section, (*parent)->address);
8488 break;
8489 case bfd_reloc_overflow:
8490 (*link_info->callbacks->reloc_overflow)
8491 (link_info, NULL,
8492 bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8493 (*parent)->howto->name, (*parent)->addend,
8494 input_bfd, input_section, (*parent)->address);
8495 break;
8496 case bfd_reloc_outofrange:
8497 /* PR ld/13730:
8498 This error can result when processing some partially
8499 complete binaries. Do not abort, but issue an error
8500 message instead. */
8501 link_info->callbacks->einfo
8502 /* xgettext:c-format */
8503 (_("%X%P: %pB(%pA): relocation \"%pR\" goes out of range\n"),
8504 abfd, input_section, * parent);
8505 goto error_return;
8506
8507 case bfd_reloc_notsupported:
8508 /* PR ld/17512
8509 This error can result when processing a corrupt binary.
8510 Do not abort. Issue an error message instead. */
8511 link_info->callbacks->einfo
8512 /* xgettext:c-format */
8513 (_("%X%P: %pB(%pA): relocation \"%pR\" is not supported\n"),
8514 abfd, input_section, * parent);
8515 goto error_return;
8516
8517 default:
8518 /* PR 17512; file: 90c2a92e.
8519 Report unexpected results, without aborting. */
8520 link_info->callbacks->einfo
8521 /* xgettext:c-format */
8522 (_("%X%P: %pB(%pA): relocation \"%pR\" returns an unrecognized value %x\n"),
8523 abfd, input_section, * parent, r);
8524 break;
8525 }
8526
8527 }
8528 }
8529 }
8530
8531 free (reloc_vector);
8532 return data;
8533
8534 error_return:
8535 free (reloc_vector);
8536 return NULL;
8537 }
8538
8539 /*
8540 INTERNAL_FUNCTION
8541 _bfd_generic_set_reloc
8542
8543 SYNOPSIS
8544 void _bfd_generic_set_reloc
8545 (bfd *abfd,
8546 sec_ptr section,
8547 arelent **relptr,
8548 unsigned int count);
8549
8550 DESCRIPTION
8551 Installs a new set of internal relocations in SECTION.
8552 */
8553
8554 void
8555 _bfd_generic_set_reloc (bfd *abfd ATTRIBUTE_UNUSED,
8556 sec_ptr section,
8557 arelent **relptr,
8558 unsigned int count)
8559 {
8560 section->orelocation = relptr;
8561 section->reloc_count = count;
8562 }
8563
8564 /*
8565 INTERNAL_FUNCTION
8566 _bfd_unrecognized_reloc
8567
8568 SYNOPSIS
8569 bfd_boolean _bfd_unrecognized_reloc
8570 (bfd * abfd,
8571 sec_ptr section,
8572 unsigned int r_type);
8573
8574 DESCRIPTION
8575 Reports an unrecognized reloc.
8576 Written as a function in order to reduce code duplication.
8577 Returns FALSE so that it can be called from a return statement.
8578 */
8579
8580 bfd_boolean
8581 _bfd_unrecognized_reloc (bfd * abfd, sec_ptr section, unsigned int r_type)
8582 {
8583 /* xgettext:c-format */
8584 _bfd_error_handler (_("%pB: unrecognized relocation type %#x in section `%pA'"),
8585 abfd, r_type, section);
8586
8587 /* PR 21803: Suggest the most likely cause of this error. */
8588 _bfd_error_handler (_("is this version of the linker - %s - out of date ?"),
8589 BFD_VERSION_STRING);
8590
8591 bfd_set_error (bfd_error_bad_value);
8592 return FALSE;
8593 }
8594
8595 reloc_howto_type *
8596 _bfd_norelocs_bfd_reloc_type_lookup
8597 (bfd *abfd,
8598 bfd_reloc_code_real_type code ATTRIBUTE_UNUSED)
8599 {
8600 return (reloc_howto_type *) _bfd_ptr_bfd_null_error (abfd);
8601 }
8602
8603 reloc_howto_type *
8604 _bfd_norelocs_bfd_reloc_name_lookup (bfd *abfd,
8605 const char *reloc_name ATTRIBUTE_UNUSED)
8606 {
8607 return (reloc_howto_type *) _bfd_ptr_bfd_null_error (abfd);
8608 }
8609
8610 long
8611 _bfd_nodynamic_canonicalize_dynamic_reloc (bfd *abfd,
8612 arelent **relp ATTRIBUTE_UNUSED,
8613 asymbol **symp ATTRIBUTE_UNUSED)
8614 {
8615 return _bfd_long_bfd_n1_error (abfd);
8616 }
This page took 0.19681 seconds and 5 git commands to generate.