bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright (C) 1990-2016 Free Software Foundation, Inc.
   3    Written by Cygnus Support.
   4
   5    This file is part of BFD, the Binary File Descriptor library.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program; if not, write to the Free Software
  19    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  20    MA 02110-1301, USA.  */
  21
  22 /*
  23 SECTION
  24         Relocations
  25
  26         BFD maintains relocations in much the same way it maintains
  27         symbols: they are left alone until required, then read in
  28         en-masse and translated into an internal form.  A common
  29         routine <<bfd_perform_relocation>> acts upon the
  30         canonical form to do the fixup.
  31
  32         Relocations are maintained on a per section basis,
  33         while symbols are maintained on a per BFD basis.
  34
  35         All that a back end has to do to fit the BFD interface is to create
  36         a <<struct reloc_cache_entry>> for each relocation
  37         in a particular section, and fill in the right bits of the structures.
  38
  39 @menu
  40 @* typedef arelent::
  41 @* howto manager::
  42 @end menu
  43
  44 */
  45
  46 /* DO compile in the reloc_code name table from libbfd.h.  */
  47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  48
  49 #include "sysdep.h"
  50 #include "bfd.h"
  51 #include "bfdlink.h"
  52 #include "libbfd.h"
  53 /*
  54 DOCDD
  55 INODE
  56         typedef arelent, howto manager, Relocations, Relocations
  57
  58 SUBSECTION
  59         typedef arelent
  60
  61         This is the structure of a relocation entry:
  62
  63 CODE_FRAGMENT
  64 .
  65 .typedef enum bfd_reloc_status
  66 .{
  67 .  {* No errors detected.  *}
  68 .  bfd_reloc_ok,
  69 .
  70 .  {* The relocation was performed, but there was an overflow.  *}
  71 .  bfd_reloc_overflow,
  72 .
  73 .  {* The address to relocate was not within the section supplied.  *}
  74 .  bfd_reloc_outofrange,
  75 .
  76 .  {* Used by special functions.  *}
  77 .  bfd_reloc_continue,
  78 .
  79 .  {* Unsupported relocation size requested.  *}
  80 .  bfd_reloc_notsupported,
  81 .
  82 .  {* Unused.  *}
  83 .  bfd_reloc_other,
  84 .
  85 .  {* The symbol to relocate against was undefined.  *}
  86 .  bfd_reloc_undefined,
  87 .
  88 .  {* The relocation was performed, but may not be ok - presently
  89 .     generated only when linking i960 coff files with i960 b.out
  90 .     symbols.  If this type is returned, the error_message argument
  91 .     to bfd_perform_relocation will be set.  *}
  92 .  bfd_reloc_dangerous
  93 . }
  94 . bfd_reloc_status_type;
  95 .
  96 .
  97 .typedef struct reloc_cache_entry
  98 .{
  99 .  {* A pointer into the canonical table of pointers.  *}
 100 .  struct bfd_symbol **sym_ptr_ptr;
 101 .
 102 .  {* offset in section.  *}
 103 .  bfd_size_type address;
 104 .
 105 .  {* addend for relocation value.  *}
 106 .  bfd_vma addend;
 107 .
 108 .  {* Pointer to how to perform the required relocation.  *}
 109 .  reloc_howto_type *howto;
 110 .
 111 .}
 112 .arelent;
 113 .
 114 */
 115
 116 /*
 117 DESCRIPTION
 118
 119         Here is a description of each of the fields within an <<arelent>>:
 120
 121         o <<sym_ptr_ptr>>
 122
 123         The symbol table pointer points to a pointer to the symbol
 124         associated with the relocation request.  It is the pointer
 125         into the table returned by the back end's
 126         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 127         referenced through a pointer to a pointer so that tools like
 128         the linker can fix up all the symbols of the same name by
 129         modifying only one pointer. The relocation routine looks in
 130         the symbol and uses the base of the section the symbol is
 131         attached to and the value of the symbol as the initial
 132         relocation offset. If the symbol pointer is zero, then the
 133         section provided is looked up.
 134
 135         o <<address>>
 136
 137         The <<address>> field gives the offset in bytes from the base of
 138         the section data which owns the relocation record to the first
 139         byte of relocatable information. The actual data relocated
 140         will be relative to this point; for example, a relocation
 141         type which modifies the bottom two bytes of a four byte word
 142         would not touch the first byte pointed to in a big endian
 143         world.
 144
 145         o <<addend>>
 146
 147         The <<addend>> is a value provided by the back end to be added (!)
 148         to the relocation offset. Its interpretation is dependent upon
 149         the howto. For example, on the 68k the code:
 150
 151 |        char foo[];
 152 |        main()
 153 |                {
 154 |                return foo[0x12345678];
 155 |                }
 156
 157         Could be compiled into:
 158
 159 |        linkw fp,#-4
 160 |        moveb @@#12345678,d0
 161 |        extbl d0
 162 |        unlk fp
 163 |        rts
 164
 165         This could create a reloc pointing to <<foo>>, but leave the
 166         offset in the data, something like:
 167
 168 |RELOCATION RECORDS FOR [.text]:
 169 |offset   type      value
 170 |00000006 32        _foo
 171 |
 172 |00000000 4e56 fffc          ; linkw fp,#-4
 173 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 174 |0000000a 49c0               ; extbl d0
 175 |0000000c 4e5e               ; unlk fp
 176 |0000000e 4e75               ; rts
 177
 178         Using coff and an 88k, some instructions don't have enough
 179         space in them to represent the full address range, and
 180         pointers have to be loaded in two parts. So you'd get something like:
 181
 182 |        or.u     r13,r0,hi16(_foo+0x12345678)
 183 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 184 |        jmp      r1
 185
 186         This should create two relocs, both pointing to <<_foo>>, and with
 187         0x12340000 in their addend field. The data would consist of:
 188
 189 |RELOCATION RECORDS FOR [.text]:
 190 |offset   type      value
 191 |00000002 HVRT16    _foo+0x12340000
 192 |00000006 LVRT16    _foo+0x12340000
 193 |
 194 |00000000 5da05678           ; or.u r13,r0,0x5678
 195 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 196 |00000008 f400c001           ; jmp r1
 197
 198         The relocation routine digs out the value from the data, adds
 199         it to the addend to get the original offset, and then adds the
 200         value of <<_foo>>. Note that all 32 bits have to be kept around
 201         somewhere, to cope with carry from bit 15 to bit 16.
 202
 203         One further example is the sparc and the a.out format. The
 204         sparc has a similar problem to the 88k, in that some
 205         instructions don't have room for an entire offset, but on the
 206         sparc the parts are created in odd sized lumps. The designers of
 207         the a.out format chose to not use the data within the section
 208         for storing part of the offset; all the offset is kept within
 209         the reloc. Anything in the data should be ignored.
 210
 211 |        save %sp,-112,%sp
 212 |        sethi %hi(_foo+0x12345678),%g2
 213 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 214 |        ret
 215 |        restore
 216
 217         Both relocs contain a pointer to <<foo>>, and the offsets
 218         contain junk.
 219
 220 |RELOCATION RECORDS FOR [.text]:
 221 |offset   type      value
 222 |00000004 HI22      _foo+0x12345678
 223 |00000008 LO10      _foo+0x12345678
 224 |
 225 |00000000 9de3bf90     ; save %sp,-112,%sp
 226 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 227 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 228 |0000000c 81c7e008     ; ret
 229 |00000010 81e80000     ; restore
 230
 231         o <<howto>>
 232
 233         The <<howto>> field can be imagined as a
 234         relocation instruction. It is a pointer to a structure which
 235         contains information on what to do with all of the other
 236         information in the reloc record and data section. A back end
 237         would normally have a relocation instruction set and turn
 238         relocations into pointers to the correct structure on input -
 239         but it would be possible to create each howto field on demand.
 240
 241 */
 242
 243 /*
 244 SUBSUBSECTION
 245         <<enum complain_overflow>>
 246
 247         Indicates what sort of overflow checking should be done when
 248         performing a relocation.
 249
 250 CODE_FRAGMENT
 251 .
 252 .enum complain_overflow
 253 .{
 254 .  {* Do not complain on overflow.  *}
 255 .  complain_overflow_dont,
 256 .
 257 .  {* Complain if the value overflows when considered as a signed
 258 .     number one bit larger than the field.  ie. A bitfield of N bits
 259 .     is allowed to represent -2**n to 2**n-1.  *}
 260 .  complain_overflow_bitfield,
 261 .
 262 .  {* Complain if the value overflows when considered as a signed
 263 .     number.  *}
 264 .  complain_overflow_signed,
 265 .
 266 .  {* Complain if the value overflows when considered as an
 267 .     unsigned number.  *}
 268 .  complain_overflow_unsigned
 269 .};
 270
 271 */
 272
 273 /*
 274 SUBSUBSECTION
 275         <<reloc_howto_type>>
 276
 277         The <<reloc_howto_type>> is a structure which contains all the
 278         information that libbfd needs to know to tie up a back end's data.
 279
 280 CODE_FRAGMENT
 281 .struct bfd_symbol;             {* Forward declaration.  *}
 282 .
 283 .struct reloc_howto_struct
 284 .{
 285 .  {*  The type field has mainly a documentary use - the back end can
 286 .      do what it wants with it, though normally the back end's
 287 .      external idea of what a reloc number is stored
 288 .      in this field.  For example, a PC relative word relocation
 289 .      in a coff environment has the type 023 - because that's
 290 .      what the outside world calls a R_PCRWORD reloc.  *}
 291 .  unsigned int type;
 292 .
 293 .  {*  The value the final relocation is shifted right by.  This drops
 294 .      unwanted data from the relocation.  *}
 295 .  unsigned int rightshift;
 296 .
 297 .  {*  The size of the item to be relocated.  This is *not* a
 298 .      power-of-two measure.  To get the number of bytes operated
 299 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 300 .  int size;
 301 .
 302 .  {*  The number of bits in the item to be relocated.  This is used
 303 .      when doing overflow checking.  *}
 304 .  unsigned int bitsize;
 305 .
 306 .  {*  The relocation is relative to the field being relocated.  *}
 307 .  bfd_boolean pc_relative;
 308 .
 309 .  {*  The bit position of the reloc value in the destination.
 310 .      The relocated value is left shifted by this amount.  *}
 311 .  unsigned int bitpos;
 312 .
 313 .  {* What type of overflow error should be checked for when
 314 .     relocating.  *}
 315 .  enum complain_overflow complain_on_overflow;
 316 .
 317 .  {* If this field is non null, then the supplied function is
 318 .     called rather than the normal function.  This allows really
 319 .     strange relocation methods to be accommodated (e.g., i960 callj
 320 .     instructions).  *}
 321 .  bfd_reloc_status_type (*special_function)
 322 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 323 .     bfd *, char **);
 324 .
 325 .  {* The textual name of the relocation type.  *}
 326 .  char *name;
 327 .
 328 .  {* Some formats record a relocation addend in the section contents
 329 .     rather than with the relocation.  For ELF formats this is the
 330 .     distinction between USE_REL and USE_RELA (though the code checks
 331 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 332 .     addend is recorded with the section contents; when performing a
 333 .     partial link (ld -r) the section contents (the data) will be
 334 .     modified.  The value of this field is FALSE if addends are
 335 .     recorded with the relocation (in arelent.addend); when performing
 336 .     a partial link the relocation will be modified.
 337 .     All relocations for all ELF USE_RELA targets should set this field
 338 .     to FALSE (values of TRUE should be looked on with suspicion).
 339 .     However, the converse is not true: not all relocations of all ELF
 340 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 341 .     to each particular target.  For relocs that aren't used in partial
 342 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 343 .  bfd_boolean partial_inplace;
 344 .
 345 .  {* src_mask selects the part of the instruction (or data) to be used
 346 .     in the relocation sum.  If the target relocations don't have an
 347 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 348 .     dst_mask to extract the addend from the section contents.  If
 349 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 350 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 351 .     bogus as in those cases the value in the dst_mask part of the
 352 .     section contents should be treated as garbage.  *}
 353 .  bfd_vma src_mask;
 354 .
 355 .  {* dst_mask selects which parts of the instruction (or data) are
 356 .     replaced with a relocated value.  *}
 357 .  bfd_vma dst_mask;
 358 .
 359 .  {* When some formats create PC relative instructions, they leave
 360 .     the value of the pc of the place being relocated in the offset
 361 .     slot of the instruction, so that a PC relative relocation can
 362 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 363 .     Some formats leave the displacement part of an instruction
 364 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 365 .  bfd_boolean pcrel_offset;
 366 .};
 367 .
 368 */
 369
 370 /*
 371 FUNCTION
 372         The HOWTO Macro
 373
 374 DESCRIPTION
 375         The HOWTO define is horrible and will go away.
 376
 377 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 378 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 379
 380 DESCRIPTION
 381         And will be replaced with the totally magic way. But for the
 382         moment, we are compatible, so do it this way.
 383
 384 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 385 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 386 .         NAME, FALSE, 0, 0, IN)
 387 .
 388
 389 DESCRIPTION
 390         This is used to fill in an empty howto entry in an array.
 391
 392 .#define EMPTY_HOWTO(C) \
 393 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 394 .         NULL, FALSE, 0, 0, FALSE)
 395 .
 396
 397 DESCRIPTION
 398         Helper routine to turn a symbol into a relocation value.
 399
 400 .#define HOWTO_PREPARE(relocation, symbol)               \
 401 .  {                                                     \
 402 .    if (symbol != NULL)                                 \
 403 .      {                                                 \
 404 .        if (bfd_is_com_section (symbol->section))       \
 405 .          {                                             \
 406 .            relocation = 0;                             \
 407 .          }                                             \
 408 .        else                                            \
 409 .          {                                             \
 410 .            relocation = symbol->value;                 \
 411 .          }                                             \
 412 .      }                                                 \
 413 .  }
 414 .
 415 */
 416
 417 /*
 418 FUNCTION
 419         bfd_get_reloc_size
 420
 421 SYNOPSIS
 422         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 423
 424 DESCRIPTION
 425         For a reloc_howto_type that operates on a fixed number of bytes,
 426         this returns the number of bytes operated on.
 427  */
 428
 429 unsigned int
 430 bfd_get_reloc_size (reloc_howto_type *howto)
 431 {
 432   switch (howto->size)
 433     {
 434     case 0: return 1;
 435     case 1: return 2;
 436     case 2: return 4;
 437     case 3: return 0;
 438     case 4: return 8;
 439     case 8: return 16;
 440     case -1: return 2;
 441     case -2: return 4;
 442     default: abort ();
 443     }
 444 }
 445
 446 /*
 447 TYPEDEF
 448         arelent_chain
 449
 450 DESCRIPTION
 451
 452         How relocs are tied together in an <<asection>>:
 453
 454 .typedef struct relent_chain
 455 .{
 456 .  arelent relent;
 457 .  struct relent_chain *next;
 458 .}
 459 .arelent_chain;
 460 .
 461 */
 462
 463 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 464 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 465
 466 /*
 467 FUNCTION
 468         bfd_check_overflow
 469
 470 SYNOPSIS
 471         bfd_reloc_status_type bfd_check_overflow
 472           (enum complain_overflow how,
 473            unsigned int bitsize,
 474            unsigned int rightshift,
 475            unsigned int addrsize,
 476            bfd_vma relocation);
 477
 478 DESCRIPTION
 479         Perform overflow checking on @var{relocation} which has
 480         @var{bitsize} significant bits and will be shifted right by
 481         @var{rightshift} bits, on a machine with addresses containing
 482         @var{addrsize} significant bits.  The result is either of
 483         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 484
 485 */
 486
 487 bfd_reloc_status_type
 488 bfd_check_overflow (enum complain_overflow how,
 489                     unsigned int bitsize,
 490                     unsigned int rightshift,
 491                     unsigned int addrsize,
 492                     bfd_vma relocation)
 493 {
 494   bfd_vma fieldmask, addrmask, signmask, ss, a;
 495   bfd_reloc_status_type flag = bfd_reloc_ok;
 496
 497   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 498      we'll be permissive: extra bits in the field mask will
 499      automatically extend the address mask for purposes of the
 500      overflow check.  */
 501   fieldmask = N_ONES (bitsize);
 502   signmask = ~fieldmask;
 503   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 504   a = (relocation & addrmask) >> rightshift;
 505
 506   switch (how)
 507     {
 508     case complain_overflow_dont:
 509       break;
 510
 511     case complain_overflow_signed:
 512       /* If any sign bits are set, all sign bits must be set.  That
 513          is, A must be a valid negative address after shifting.  */
 514       signmask = ~ (fieldmask >> 1);
 515       /* Fall thru */
 516
 517     case complain_overflow_bitfield:
 518       /* Bitfields are sometimes signed, sometimes unsigned.  We
 519          explicitly allow an address wrap too, which means a bitfield
 520          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 521          if the value has some, but not all, bits set outside the
 522          field.  */
 523       ss = a & signmask;
 524       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 525         flag = bfd_reloc_overflow;
 526       break;
 527
 528     case complain_overflow_unsigned:
 529       /* We have an overflow if the address does not fit in the field.  */
 530       if ((a & signmask) != 0)
 531         flag = bfd_reloc_overflow;
 532       break;
 533
 534     default:
 535       abort ();
 536     }
 537
 538   return flag;
 539 }
 540
 541 /*
 542 FUNCTION
 543         bfd_perform_relocation
 544
 545 SYNOPSIS
 546         bfd_reloc_status_type bfd_perform_relocation
 547           (bfd *abfd,
 548            arelent *reloc_entry,
 549            void *data,
 550            asection *input_section,
 551            bfd *output_bfd,
 552            char **error_message);
 553
 554 DESCRIPTION
 555         If @var{output_bfd} is supplied to this function, the
 556         generated image will be relocatable; the relocations are
 557         copied to the output file after they have been changed to
 558         reflect the new state of the world. There are two ways of
 559         reflecting the results of partial linkage in an output file:
 560         by modifying the output data in place, and by modifying the
 561         relocation record.  Some native formats (e.g., basic a.out and
 562         basic coff) have no way of specifying an addend in the
 563         relocation type, so the addend has to go in the output data.
 564         This is no big deal since in these formats the output data
 565         slot will always be big enough for the addend. Complex reloc
 566         types with addends were invented to solve just this problem.
 567         The @var{error_message} argument is set to an error message if
 568         this return @code{bfd_reloc_dangerous}.
 569
 570 */
 571
 572 bfd_reloc_status_type
 573 bfd_perform_relocation (bfd *abfd,
 574                         arelent *reloc_entry,
 575                         void *data,
 576                         asection *input_section,
 577                         bfd *output_bfd,
 578                         char **error_message)
 579 {
 580   bfd_vma relocation;
 581   bfd_reloc_status_type flag = bfd_reloc_ok;
 582   bfd_size_type octets;
 583   bfd_vma output_base = 0;
 584   reloc_howto_type *howto = reloc_entry->howto;
 585   asection *reloc_target_output_section;
 586   asymbol *symbol;
 587
 588   symbol = *(reloc_entry->sym_ptr_ptr);
 589   if (bfd_is_abs_section (symbol->section)
 590       && output_bfd != NULL)
 591     {
 592       reloc_entry->address += input_section->output_offset;
 593       return bfd_reloc_ok;
 594     }
 595
 596   /* PR 17512: file: 0f67f69d.  */
 597   if (howto == NULL)
 598     return bfd_reloc_undefined;
 599
 600   /* If we are not producing relocatable output, return an error if
 601      the symbol is not defined.  An undefined weak symbol is
 602      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 603   if (bfd_is_und_section (symbol->section)
 604       && (symbol->flags & BSF_WEAK) == 0
 605       && output_bfd == NULL)
 606     flag = bfd_reloc_undefined;
 607
 608   /* If there is a function supplied to handle this relocation type,
 609      call it.  It'll return `bfd_reloc_continue' if further processing
 610      can be done.  */
 611   if (howto->special_function)
 612     {
 613       bfd_reloc_status_type cont;
 614       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 615                                       input_section, output_bfd,
 616                                       error_message);
 617       if (cont != bfd_reloc_continue)
 618         return cont;
 619     }
 620
 621   /* Is the address of the relocation really within the section?
 622      Include the size of the reloc in the test for out of range addresses.
 623      PR 17512: file: c146ab8b, 46dff27f, 38e53ebf.  */
 624   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 625   if (octets + bfd_get_reloc_size (howto)
 626       > bfd_get_section_limit_octets (abfd, input_section))
 627     return bfd_reloc_outofrange;
 628
 629   /* Work out which section the relocation is targeted at and the
 630      initial relocation command value.  */
 631
 632   /* Get symbol value.  (Common symbols are special.)  */
 633   if (bfd_is_com_section (symbol->section))
 634     relocation = 0;
 635   else
 636     relocation = symbol->value;
 637
 638   reloc_target_output_section = symbol->section->output_section;
 639
 640   /* Convert input-section-relative symbol value to absolute.  */
 641   if ((output_bfd && ! howto->partial_inplace)
 642       || reloc_target_output_section == NULL)
 643     output_base = 0;
 644   else
 645     output_base = reloc_target_output_section->vma;
 646
 647   relocation += output_base + symbol->section->output_offset;
 648
 649   /* Add in supplied addend.  */
 650   relocation += reloc_entry->addend;
 651
 652   /* Here the variable relocation holds the final address of the
 653      symbol we are relocating against, plus any addend.  */
 654
 655   if (howto->pc_relative)
 656     {
 657       /* This is a PC relative relocation.  We want to set RELOCATION
 658          to the distance between the address of the symbol and the
 659          location.  RELOCATION is already the address of the symbol.
 660
 661          We start by subtracting the address of the section containing
 662          the location.
 663
 664          If pcrel_offset is set, we must further subtract the position
 665          of the location within the section.  Some targets arrange for
 666          the addend to be the negative of the position of the location
 667          within the section; for example, i386-aout does this.  For
 668          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 669          include the position of the location; for example, m88kbcs,
 670          or ELF.  For those targets, pcrel_offset is TRUE.
 671
 672          If we are producing relocatable output, then we must ensure
 673          that this reloc will be correctly computed when the final
 674          relocation is done.  If pcrel_offset is FALSE we want to wind
 675          up with the negative of the location within the section,
 676          which means we must adjust the existing addend by the change
 677          in the location within the section.  If pcrel_offset is TRUE
 678          we do not want to adjust the existing addend at all.
 679
 680          FIXME: This seems logical to me, but for the case of
 681          producing relocatable output it is not what the code
 682          actually does.  I don't want to change it, because it seems
 683          far too likely that something will break.  */
 684
 685       relocation -=
 686         input_section->output_section->vma + input_section->output_offset;
 687
 688       if (howto->pcrel_offset)
 689         relocation -= reloc_entry->address;
 690     }
 691
 692   if (output_bfd != NULL)
 693     {
 694       if (! howto->partial_inplace)
 695         {
 696           /* This is a partial relocation, and we want to apply the relocation
 697              to the reloc entry rather than the raw data. Modify the reloc
 698              inplace to reflect what we now know.  */
 699           reloc_entry->addend = relocation;
 700           reloc_entry->address += input_section->output_offset;
 701           return flag;
 702         }
 703       else
 704         {
 705           /* This is a partial relocation, but inplace, so modify the
 706              reloc record a bit.
 707
 708              If we've relocated with a symbol with a section, change
 709              into a ref to the section belonging to the symbol.  */
 710
 711           reloc_entry->address += input_section->output_offset;
 712
 713           /* WTF?? */
 714           if (abfd->xvec->flavour == bfd_target_coff_flavour
 715               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 716               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 717             {
 718               /* For m68k-coff, the addend was being subtracted twice during
 719                  relocation with -r.  Removing the line below this comment
 720                  fixes that problem; see PR 2953.
 721
 722 However, Ian wrote the following, regarding removing the line below,
 723 which explains why it is still enabled:  --djm
 724
 725 If you put a patch like that into BFD you need to check all the COFF
 726 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 727 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 728 problem in a different way.  There may very well be a reason that the
 729 code works as it does.
 730
 731 Hmmm.  The first obvious point is that bfd_perform_relocation should
 732 not have any tests that depend upon the flavour.  It's seem like
 733 entirely the wrong place for such a thing.  The second obvious point
 734 is that the current code ignores the reloc addend when producing
 735 relocatable output for COFF.  That's peculiar.  In fact, I really
 736 have no idea what the point of the line you want to remove is.
 737
 738 A typical COFF reloc subtracts the old value of the symbol and adds in
 739 the new value to the location in the object file (if it's a pc
 740 relative reloc it adds the difference between the symbol value and the
 741 location).  When relocating we need to preserve that property.
 742
 743 BFD handles this by setting the addend to the negative of the old
 744 value of the symbol.  Unfortunately it handles common symbols in a
 745 non-standard way (it doesn't subtract the old value) but that's a
 746 different story (we can't change it without losing backward
 747 compatibility with old object files) (coff-i386 does subtract the old
 748 value, to be compatible with existing coff-i386 targets, like SCO).
 749
 750 So everything works fine when not producing relocatable output.  When
 751 we are producing relocatable output, logically we should do exactly
 752 what we do when not producing relocatable output.  Therefore, your
 753 patch is correct.  In fact, it should probably always just set
 754 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 755 add the value into the object file.  This won't hurt the COFF code,
 756 which doesn't use the addend; I'm not sure what it will do to other
 757 formats (the thing to check for would be whether any formats both use
 758 the addend and set partial_inplace).
 759
 760 When I wanted to make coff-i386 produce relocatable output, I ran
 761 into the problem that you are running into: I wanted to remove that
 762 line.  Rather than risk it, I made the coff-i386 relocs use a special
 763 function; it's coff_i386_reloc in coff-i386.c.  The function
 764 specifically adds the addend field into the object file, knowing that
 765 bfd_perform_relocation is not going to.  If you remove that line, then
 766 coff-i386.c will wind up adding the addend field in twice.  It's
 767 trivial to fix; it just needs to be done.
 768
 769 The problem with removing the line is just that it may break some
 770 working code.  With BFD it's hard to be sure of anything.  The right
 771 way to deal with this is simply to build and test at least all the
 772 supported COFF targets.  It should be straightforward if time and disk
 773 space consuming.  For each target:
 774     1) build the linker
 775     2) generate some executable, and link it using -r (I would
 776        probably use paranoia.o and link against newlib/libc.a, which
 777        for all the supported targets would be available in
 778        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 779     3) make the change to reloc.c
 780     4) rebuild the linker
 781     5) repeat step 2
 782     6) if the resulting object files are the same, you have at least
 783        made it no worse
 784     7) if they are different you have to figure out which version is
 785        right
 786 */
 787               relocation -= reloc_entry->addend;
 788               reloc_entry->addend = 0;
 789             }
 790           else
 791             {
 792               reloc_entry->addend = relocation;
 793             }
 794         }
 795     }
 796
 797   /* FIXME: This overflow checking is incomplete, because the value
 798      might have overflowed before we get here.  For a correct check we
 799      need to compute the value in a size larger than bitsize, but we
 800      can't reasonably do that for a reloc the same size as a host
 801      machine word.
 802      FIXME: We should also do overflow checking on the result after
 803      adding in the value contained in the object file.  */
 804   if (howto->complain_on_overflow != complain_overflow_dont
 805       && flag == bfd_reloc_ok)
 806     flag = bfd_check_overflow (howto->complain_on_overflow,
 807                                howto->bitsize,
 808                                howto->rightshift,
 809                                bfd_arch_bits_per_address (abfd),
 810                                relocation);
 811
 812   /* Either we are relocating all the way, or we don't want to apply
 813      the relocation to the reloc entry (probably because there isn't
 814      any room in the output format to describe addends to relocs).  */
 815
 816   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 817      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 818      following program:
 819
 820      struct str
 821      {
 822        unsigned int i0;
 823      } s = { 0 };
 824
 825      int
 826      main ()
 827      {
 828        unsigned long x;
 829
 830        x = 0x100000000;
 831        x <<= (unsigned long) s.i0;
 832        if (x == 0)
 833          printf ("failed\n");
 834        else
 835          printf ("succeeded (%lx)\n", x);
 836      }
 837      */
 838
 839   relocation >>= (bfd_vma) howto->rightshift;
 840
 841   /* Shift everything up to where it's going to be used.  */
 842   relocation <<= (bfd_vma) howto->bitpos;
 843
 844   /* Wait for the day when all have the mask in them.  */
 845
 846   /* What we do:
 847      i instruction to be left alone
 848      o offset within instruction
 849      r relocation offset to apply
 850      S src mask
 851      D dst mask
 852      N ~dst mask
 853      A part 1
 854      B part 2
 855      R result
 856
 857      Do this:
 858      ((  i i i i i o o o o o  from bfd_get<size>
 859      and           S S S S S) to get the size offset we want
 860      +   r r r r r r r r r r) to get the final value to place
 861      and           D D D D D  to chop to right size
 862      -----------------------
 863      =             A A A A A
 864      And this:
 865      (   i i i i i o o o o o  from bfd_get<size>
 866      and N N N N N          ) get instruction
 867      -----------------------
 868      =   B B B B B
 869
 870      And then:
 871      (   B B B B B
 872      or            A A A A A)
 873      -----------------------
 874      =   R R R R R R R R R R  put into bfd_put<size>
 875      */
 876
 877 #define DOIT(x) \
 878   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 879
 880   switch (howto->size)
 881     {
 882     case 0:
 883       {
 884         char x = bfd_get_8 (abfd, (char *) data + octets);
 885         DOIT (x);
 886         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 887       }
 888       break;
 889
 890     case 1:
 891       {
 892         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 893         DOIT (x);
 894         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 895       }
 896       break;
 897     case 2:
 898       {
 899         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 900         DOIT (x);
 901         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 902       }
 903       break;
 904     case -2:
 905       {
 906         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 907         relocation = -relocation;
 908         DOIT (x);
 909         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 910       }
 911       break;
 912
 913     case -1:
 914       {
 915         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 916         relocation = -relocation;
 917         DOIT (x);
 918         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 919       }
 920       break;
 921
 922     case 3:
 923       /* Do nothing */
 924       break;
 925
 926     case 4:
 927 #ifdef BFD64
 928       {
 929         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 930         DOIT (x);
 931         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 932       }
 933 #else
 934       abort ();
 935 #endif
 936       break;
 937     default:
 938       return bfd_reloc_other;
 939     }
 940
 941   return flag;
 942 }
 943
 944 /*
 945 FUNCTION
 946         bfd_install_relocation
 947
 948 SYNOPSIS
 949         bfd_reloc_status_type bfd_install_relocation
 950           (bfd *abfd,
 951            arelent *reloc_entry,
 952            void *data, bfd_vma data_start,
 953            asection *input_section,
 954            char **error_message);
 955
 956 DESCRIPTION
 957         This looks remarkably like <<bfd_perform_relocation>>, except it
 958         does not expect that the section contents have been filled in.
 959         I.e., it's suitable for use when creating, rather than applying
 960         a relocation.
 961
 962         For now, this function should be considered reserved for the
 963         assembler.
 964 */
 965
 966 bfd_reloc_status_type
 967 bfd_install_relocation (bfd *abfd,
 968                         arelent *reloc_entry,
 969                         void *data_start,
 970                         bfd_vma data_start_offset,
 971                         asection *input_section,
 972                         char **error_message)
 973 {
 974   bfd_vma relocation;
 975   bfd_reloc_status_type flag = bfd_reloc_ok;
 976   bfd_size_type octets;
 977   bfd_vma output_base = 0;
 978   reloc_howto_type *howto = reloc_entry->howto;
 979   asection *reloc_target_output_section;
 980   asymbol *symbol;
 981   bfd_byte *data;
 982
 983   symbol = *(reloc_entry->sym_ptr_ptr);
 984   if (bfd_is_abs_section (symbol->section))
 985     {
 986       reloc_entry->address += input_section->output_offset;
 987       return bfd_reloc_ok;
 988     }
 989
 990   /* If there is a function supplied to handle this relocation type,
 991      call it.  It'll return `bfd_reloc_continue' if further processing
 992      can be done.  */
 993   if (howto->special_function)
 994     {
 995       bfd_reloc_status_type cont;
 996
 997       /* XXX - The special_function calls haven't been fixed up to deal
 998          with creating new relocations and section contents.  */
 999       cont = howto->special_function (abfd, reloc_entry, symbol,
1000                                       /* XXX - Non-portable! */
1001                                       ((bfd_byte *) data_start
1002                                        - data_start_offset),
1003                                       input_section, abfd, error_message);
1004       if (cont != bfd_reloc_continue)
1005         return cont;
1006     }
1007
1008   /* Is the address of the relocation really within the section?  */
1009   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
1010   if (octets + bfd_get_reloc_size (howto)
1011       > bfd_get_section_limit_octets (abfd, input_section))
1012     return bfd_reloc_outofrange;
1013
1014   /* Work out which section the relocation is targeted at and the
1015      initial relocation command value.  */
1016
1017   /* Get symbol value.  (Common symbols are special.)  */
1018   if (bfd_is_com_section (symbol->section))
1019     relocation = 0;
1020   else
1021     relocation = symbol->value;
1022
1023   reloc_target_output_section = symbol->section->output_section;
1024
1025   /* Convert input-section-relative symbol value to absolute.  */
1026   if (! howto->partial_inplace)
1027     output_base = 0;
1028   else
1029     output_base = reloc_target_output_section->vma;
1030
1031   relocation += output_base + symbol->section->output_offset;
1032
1033   /* Add in supplied addend.  */
1034   relocation += reloc_entry->addend;
1035
1036   /* Here the variable relocation holds the final address of the
1037      symbol we are relocating against, plus any addend.  */
1038
1039   if (howto->pc_relative)
1040     {
1041       /* This is a PC relative relocation.  We want to set RELOCATION
1042          to the distance between the address of the symbol and the
1043          location.  RELOCATION is already the address of the symbol.
1044
1045          We start by subtracting the address of the section containing
1046          the location.
1047
1048          If pcrel_offset is set, we must further subtract the position
1049          of the location within the section.  Some targets arrange for
1050          the addend to be the negative of the position of the location
1051          within the section; for example, i386-aout does this.  For
1052          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1053          include the position of the location; for example, m88kbcs,
1054          or ELF.  For those targets, pcrel_offset is TRUE.
1055
1056          If we are producing relocatable output, then we must ensure
1057          that this reloc will be correctly computed when the final
1058          relocation is done.  If pcrel_offset is FALSE we want to wind
1059          up with the negative of the location within the section,
1060          which means we must adjust the existing addend by the change
1061          in the location within the section.  If pcrel_offset is TRUE
1062          we do not want to adjust the existing addend at all.
1063
1064          FIXME: This seems logical to me, but for the case of
1065          producing relocatable output it is not what the code
1066          actually does.  I don't want to change it, because it seems
1067          far too likely that something will break.  */
1068
1069       relocation -=
1070         input_section->output_section->vma + input_section->output_offset;
1071
1072       if (howto->pcrel_offset && howto->partial_inplace)
1073         relocation -= reloc_entry->address;
1074     }
1075
1076   if (! howto->partial_inplace)
1077     {
1078       /* This is a partial relocation, and we want to apply the relocation
1079          to the reloc entry rather than the raw data. Modify the reloc
1080          inplace to reflect what we now know.  */
1081       reloc_entry->addend = relocation;
1082       reloc_entry->address += input_section->output_offset;
1083       return flag;
1084     }
1085   else
1086     {
1087       /* This is a partial relocation, but inplace, so modify the
1088          reloc record a bit.
1089
1090          If we've relocated with a symbol with a section, change
1091          into a ref to the section belonging to the symbol.  */
1092       reloc_entry->address += input_section->output_offset;
1093
1094       /* WTF?? */
1095       if (abfd->xvec->flavour == bfd_target_coff_flavour
1096           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1097           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1098         {
1099
1100           /* For m68k-coff, the addend was being subtracted twice during
1101              relocation with -r.  Removing the line below this comment
1102              fixes that problem; see PR 2953.
1103
1104 However, Ian wrote the following, regarding removing the line below,
1105 which explains why it is still enabled:  --djm
1106
1107 If you put a patch like that into BFD you need to check all the COFF
1108 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1109 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1110 problem in a different way.  There may very well be a reason that the
1111 code works as it does.
1112
1113 Hmmm.  The first obvious point is that bfd_install_relocation should
1114 not have any tests that depend upon the flavour.  It's seem like
1115 entirely the wrong place for such a thing.  The second obvious point
1116 is that the current code ignores the reloc addend when producing
1117 relocatable output for COFF.  That's peculiar.  In fact, I really
1118 have no idea what the point of the line you want to remove is.
1119
1120 A typical COFF reloc subtracts the old value of the symbol and adds in
1121 the new value to the location in the object file (if it's a pc
1122 relative reloc it adds the difference between the symbol value and the
1123 location).  When relocating we need to preserve that property.
1124
1125 BFD handles this by setting the addend to the negative of the old
1126 value of the symbol.  Unfortunately it handles common symbols in a
1127 non-standard way (it doesn't subtract the old value) but that's a
1128 different story (we can't change it without losing backward
1129 compatibility with old object files) (coff-i386 does subtract the old
1130 value, to be compatible with existing coff-i386 targets, like SCO).
1131
1132 So everything works fine when not producing relocatable output.  When
1133 we are producing relocatable output, logically we should do exactly
1134 what we do when not producing relocatable output.  Therefore, your
1135 patch is correct.  In fact, it should probably always just set
1136 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1137 add the value into the object file.  This won't hurt the COFF code,
1138 which doesn't use the addend; I'm not sure what it will do to other
1139 formats (the thing to check for would be whether any formats both use
1140 the addend and set partial_inplace).
1141
1142 When I wanted to make coff-i386 produce relocatable output, I ran
1143 into the problem that you are running into: I wanted to remove that
1144 line.  Rather than risk it, I made the coff-i386 relocs use a special
1145 function; it's coff_i386_reloc in coff-i386.c.  The function
1146 specifically adds the addend field into the object file, knowing that
1147 bfd_install_relocation is not going to.  If you remove that line, then
1148 coff-i386.c will wind up adding the addend field in twice.  It's
1149 trivial to fix; it just needs to be done.
1150
1151 The problem with removing the line is just that it may break some
1152 working code.  With BFD it's hard to be sure of anything.  The right
1153 way to deal with this is simply to build and test at least all the
1154 supported COFF targets.  It should be straightforward if time and disk
1155 space consuming.  For each target:
1156     1) build the linker
1157     2) generate some executable, and link it using -r (I would
1158        probably use paranoia.o and link against newlib/libc.a, which
1159        for all the supported targets would be available in
1160        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1161     3) make the change to reloc.c
1162     4) rebuild the linker
1163     5) repeat step 2
1164     6) if the resulting object files are the same, you have at least
1165        made it no worse
1166     7) if they are different you have to figure out which version is
1167        right.  */
1168           relocation -= reloc_entry->addend;
1169           /* FIXME: There should be no target specific code here...  */
1170           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1171             reloc_entry->addend = 0;
1172         }
1173       else
1174         {
1175           reloc_entry->addend = relocation;
1176         }
1177     }
1178
1179   /* FIXME: This overflow checking is incomplete, because the value
1180      might have overflowed before we get here.  For a correct check we
1181      need to compute the value in a size larger than bitsize, but we
1182      can't reasonably do that for a reloc the same size as a host
1183      machine word.
1184      FIXME: We should also do overflow checking on the result after
1185      adding in the value contained in the object file.  */
1186   if (howto->complain_on_overflow != complain_overflow_dont)
1187     flag = bfd_check_overflow (howto->complain_on_overflow,
1188                                howto->bitsize,
1189                                howto->rightshift,
1190                                bfd_arch_bits_per_address (abfd),
1191                                relocation);
1192
1193   /* Either we are relocating all the way, or we don't want to apply
1194      the relocation to the reloc entry (probably because there isn't
1195      any room in the output format to describe addends to relocs).  */
1196
1197   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1198      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1199      following program:
1200
1201      struct str
1202      {
1203        unsigned int i0;
1204      } s = { 0 };
1205
1206      int
1207      main ()
1208      {
1209        unsigned long x;
1210
1211        x = 0x100000000;
1212        x <<= (unsigned long) s.i0;
1213        if (x == 0)
1214          printf ("failed\n");
1215        else
1216          printf ("succeeded (%lx)\n", x);
1217      }
1218      */
1219
1220   relocation >>= (bfd_vma) howto->rightshift;
1221
1222   /* Shift everything up to where it's going to be used.  */
1223   relocation <<= (bfd_vma) howto->bitpos;
1224
1225   /* Wait for the day when all have the mask in them.  */
1226
1227   /* What we do:
1228      i instruction to be left alone
1229      o offset within instruction
1230      r relocation offset to apply
1231      S src mask
1232      D dst mask
1233      N ~dst mask
1234      A part 1
1235      B part 2
1236      R result
1237
1238      Do this:
1239      ((  i i i i i o o o o o  from bfd_get<size>
1240      and           S S S S S) to get the size offset we want
1241      +   r r r r r r r r r r) to get the final value to place
1242      and           D D D D D  to chop to right size
1243      -----------------------
1244      =             A A A A A
1245      And this:
1246      (   i i i i i o o o o o  from bfd_get<size>
1247      and N N N N N          ) get instruction
1248      -----------------------
1249      =   B B B B B
1250
1251      And then:
1252      (   B B B B B
1253      or            A A A A A)
1254      -----------------------
1255      =   R R R R R R R R R R  put into bfd_put<size>
1256      */
1257
1258 #define DOIT(x) \
1259   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1260
1261   data = (bfd_byte *) data_start + (octets - data_start_offset);
1262
1263   switch (howto->size)
1264     {
1265     case 0:
1266       {
1267         char x = bfd_get_8 (abfd, data);
1268         DOIT (x);
1269         bfd_put_8 (abfd, x, data);
1270       }
1271       break;
1272
1273     case 1:
1274       {
1275         short x = bfd_get_16 (abfd, data);
1276         DOIT (x);
1277         bfd_put_16 (abfd, (bfd_vma) x, data);
1278       }
1279       break;
1280     case 2:
1281       {
1282         long x = bfd_get_32 (abfd, data);
1283         DOIT (x);
1284         bfd_put_32 (abfd, (bfd_vma) x, data);
1285       }
1286       break;
1287     case -2:
1288       {
1289         long x = bfd_get_32 (abfd, data);
1290         relocation = -relocation;
1291         DOIT (x);
1292         bfd_put_32 (abfd, (bfd_vma) x, data);
1293       }
1294       break;
1295
1296     case 3:
1297       /* Do nothing */
1298       break;
1299
1300     case 4:
1301       {
1302         bfd_vma x = bfd_get_64 (abfd, data);
1303         DOIT (x);
1304         bfd_put_64 (abfd, x, data);
1305       }
1306       break;
1307     default:
1308       return bfd_reloc_other;
1309     }
1310
1311   return flag;
1312 }
1313
1314 /* This relocation routine is used by some of the backend linkers.
1315    They do not construct asymbol or arelent structures, so there is no
1316    reason for them to use bfd_perform_relocation.  Also,
1317    bfd_perform_relocation is so hacked up it is easier to write a new
1318    function than to try to deal with it.
1319
1320    This routine does a final relocation.  Whether it is useful for a
1321    relocatable link depends upon how the object format defines
1322    relocations.
1323
1324    FIXME: This routine ignores any special_function in the HOWTO,
1325    since the existing special_function values have been written for
1326    bfd_perform_relocation.
1327
1328    HOWTO is the reloc howto information.
1329    INPUT_BFD is the BFD which the reloc applies to.
1330    INPUT_SECTION is the section which the reloc applies to.
1331    CONTENTS is the contents of the section.
1332    ADDRESS is the address of the reloc within INPUT_SECTION.
1333    VALUE is the value of the symbol the reloc refers to.
1334    ADDEND is the addend of the reloc.  */
1335
1336 bfd_reloc_status_type
1337 _bfd_final_link_relocate (reloc_howto_type *howto,
1338                           bfd *input_bfd,
1339                           asection *input_section,
1340                           bfd_byte *contents,
1341                           bfd_vma address,
1342                           bfd_vma value,
1343                           bfd_vma addend)
1344 {
1345   bfd_vma relocation;
1346   bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
1347
1348   /* Sanity check the address.  */
1349   if (octets + bfd_get_reloc_size (howto)
1350       > bfd_get_section_limit_octets (input_bfd, input_section))
1351     return bfd_reloc_outofrange;
1352
1353   /* This function assumes that we are dealing with a basic relocation
1354      against a symbol.  We want to compute the value of the symbol to
1355      relocate to.  This is just VALUE, the value of the symbol, plus
1356      ADDEND, any addend associated with the reloc.  */
1357   relocation = value + addend;
1358
1359   /* If the relocation is PC relative, we want to set RELOCATION to
1360      the distance between the symbol (currently in RELOCATION) and the
1361      location we are relocating.  Some targets (e.g., i386-aout)
1362      arrange for the contents of the section to be the negative of the
1363      offset of the location within the section; for such targets
1364      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1365      simply leave the contents of the section as zero; for such
1366      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1367      need to subtract out the offset of the location within the
1368      section (which is just ADDRESS).  */
1369   if (howto->pc_relative)
1370     {
1371       relocation -= (input_section->output_section->vma
1372                      + input_section->output_offset);
1373       if (howto->pcrel_offset)
1374         relocation -= address;
1375     }
1376
1377   return _bfd_relocate_contents (howto, input_bfd, relocation,
1378                                  contents
1379                                  + address * bfd_octets_per_byte (input_bfd));
1380 }
1381
1382 /* Relocate a given location using a given value and howto.  */
1383
1384 bfd_reloc_status_type
1385 _bfd_relocate_contents (reloc_howto_type *howto,
1386                         bfd *input_bfd,
1387                         bfd_vma relocation,
1388                         bfd_byte *location)
1389 {
1390   int size;
1391   bfd_vma x = 0;
1392   bfd_reloc_status_type flag;
1393   unsigned int rightshift = howto->rightshift;
1394   unsigned int bitpos = howto->bitpos;
1395
1396   /* If the size is negative, negate RELOCATION.  This isn't very
1397      general.  */
1398   if (howto->size < 0)
1399     relocation = -relocation;
1400
1401   /* Get the value we are going to relocate.  */
1402   size = bfd_get_reloc_size (howto);
1403   switch (size)
1404     {
1405     default:
1406       abort ();
1407     case 0:
1408       return bfd_reloc_ok;
1409     case 1:
1410       x = bfd_get_8 (input_bfd, location);
1411       break;
1412     case 2:
1413       x = bfd_get_16 (input_bfd, location);
1414       break;
1415     case 4:
1416       x = bfd_get_32 (input_bfd, location);
1417       break;
1418     case 8:
1419 #ifdef BFD64
1420       x = bfd_get_64 (input_bfd, location);
1421 #else
1422       abort ();
1423 #endif
1424       break;
1425     }
1426
1427   /* Check for overflow.  FIXME: We may drop bits during the addition
1428      which we don't check for.  We must either check at every single
1429      operation, which would be tedious, or we must do the computations
1430      in a type larger than bfd_vma, which would be inefficient.  */
1431   flag = bfd_reloc_ok;
1432   if (howto->complain_on_overflow != complain_overflow_dont)
1433     {
1434       bfd_vma addrmask, fieldmask, signmask, ss;
1435       bfd_vma a, b, sum;
1436
1437       /* Get the values to be added together.  For signed and unsigned
1438          relocations, we assume that all values should be truncated to
1439          the size of an address.  For bitfields, all the bits matter.
1440          See also bfd_check_overflow.  */
1441       fieldmask = N_ONES (howto->bitsize);
1442       signmask = ~fieldmask;
1443       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1444                   | (fieldmask << rightshift));
1445       a = (relocation & addrmask) >> rightshift;
1446       b = (x & howto->src_mask & addrmask) >> bitpos;
1447       addrmask >>= rightshift;
1448
1449       switch (howto->complain_on_overflow)
1450         {
1451         case complain_overflow_signed:
1452           /* If any sign bits are set, all sign bits must be set.
1453              That is, A must be a valid negative address after
1454              shifting.  */
1455           signmask = ~(fieldmask >> 1);
1456           /* Fall thru */
1457
1458         case complain_overflow_bitfield:
1459           /* Much like the signed check, but for a field one bit
1460              wider.  We allow a bitfield to represent numbers in the
1461              range -2**n to 2**n-1, where n is the number of bits in the
1462              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1463              can't overflow, which is exactly what we want.  */
1464           ss = a & signmask;
1465           if (ss != 0 && ss != (addrmask & signmask))
1466             flag = bfd_reloc_overflow;
1467
1468           /* We only need this next bit of code if the sign bit of B
1469              is below the sign bit of A.  This would only happen if
1470              SRC_MASK had fewer bits than BITSIZE.  Note that if
1471              SRC_MASK has more bits than BITSIZE, we can get into
1472              trouble; we would need to verify that B is in range, as
1473              we do for A above.  */
1474           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1475           ss >>= bitpos;
1476
1477           /* Set all the bits above the sign bit.  */
1478           b = (b ^ ss) - ss;
1479
1480           /* Now we can do the addition.  */
1481           sum = a + b;
1482
1483           /* See if the result has the correct sign.  Bits above the
1484              sign bit are junk now; ignore them.  If the sum is
1485              positive, make sure we did not have all negative inputs;
1486              if the sum is negative, make sure we did not have all
1487              positive inputs.  The test below looks only at the sign
1488              bits, and it really just
1489                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1490
1491              We mask with addrmask here to explicitly allow an address
1492              wrap-around.  The Linux kernel relies on it, and it is
1493              the only way to write assembler code which can run when
1494              loaded at a location 0x80000000 away from the location at
1495              which it is linked.  */
1496           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1497             flag = bfd_reloc_overflow;
1498           break;
1499
1500         case complain_overflow_unsigned:
1501           /* Checking for an unsigned overflow is relatively easy:
1502              trim the addresses and add, and trim the result as well.
1503              Overflow is normally indicated when the result does not
1504              fit in the field.  However, we also need to consider the
1505              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1506              input is 0x80000000, and bfd_vma is only 32 bits; then we
1507              will get sum == 0, but there is an overflow, since the
1508              inputs did not fit in the field.  Instead of doing a
1509              separate test, we can check for this by or-ing in the
1510              operands when testing for the sum overflowing its final
1511              field.  */
1512           sum = (a + b) & addrmask;
1513           if ((a | b | sum) & signmask)
1514             flag = bfd_reloc_overflow;
1515           break;
1516
1517         default:
1518           abort ();
1519         }
1520     }
1521
1522   /* Put RELOCATION in the right bits.  */
1523   relocation >>= (bfd_vma) rightshift;
1524   relocation <<= (bfd_vma) bitpos;
1525
1526   /* Add RELOCATION to the right bits of X.  */
1527   x = ((x & ~howto->dst_mask)
1528        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1529
1530   /* Put the relocated value back in the object file.  */
1531   switch (size)
1532     {
1533     default:
1534       abort ();
1535     case 1:
1536       bfd_put_8 (input_bfd, x, location);
1537       break;
1538     case 2:
1539       bfd_put_16 (input_bfd, x, location);
1540       break;
1541     case 4:
1542       bfd_put_32 (input_bfd, x, location);
1543       break;
1544     case 8:
1545 #ifdef BFD64
1546       bfd_put_64 (input_bfd, x, location);
1547 #else
1548       abort ();
1549 #endif
1550       break;
1551     }
1552
1553   return flag;
1554 }
1555
1556 /* Clear a given location using a given howto, by applying a fixed relocation
1557    value and discarding any in-place addend.  This is used for fixed-up
1558    relocations against discarded symbols, to make ignorable debug or unwind
1559    information more obvious.  */
1560
1561 void
1562 _bfd_clear_contents (reloc_howto_type *howto,
1563                      bfd *input_bfd,
1564                      asection *input_section,
1565                      bfd_byte *location)
1566 {
1567   int size;
1568   bfd_vma x = 0;
1569
1570   /* Get the value we are going to relocate.  */
1571   size = bfd_get_reloc_size (howto);
1572   switch (size)
1573     {
1574     default:
1575       abort ();
1576     case 0:
1577       return;
1578     case 1:
1579       x = bfd_get_8 (input_bfd, location);
1580       break;
1581     case 2:
1582       x = bfd_get_16 (input_bfd, location);
1583       break;
1584     case 4:
1585       x = bfd_get_32 (input_bfd, location);
1586       break;
1587     case 8:
1588 #ifdef BFD64
1589       x = bfd_get_64 (input_bfd, location);
1590 #else
1591       abort ();
1592 #endif
1593       break;
1594     }
1595
1596   /* Zero out the unwanted bits of X.  */
1597   x &= ~howto->dst_mask;
1598
1599   /* For a range list, use 1 instead of 0 as placeholder.  0
1600      would terminate the list, hiding any later entries.  */
1601   if (strcmp (bfd_get_section_name (input_bfd, input_section),
1602               ".debug_ranges") == 0
1603       && (howto->dst_mask & 1) != 0)
1604     x |= 1;
1605
1606   /* Put the relocated value back in the object file.  */
1607   switch (size)
1608     {
1609     default:
1610     case 0:
1611       abort ();
1612     case 1:
1613       bfd_put_8 (input_bfd, x, location);
1614       break;
1615     case 2:
1616       bfd_put_16 (input_bfd, x, location);
1617       break;
1618     case 4:
1619       bfd_put_32 (input_bfd, x, location);
1620       break;
1621     case 8:
1622 #ifdef BFD64
1623       bfd_put_64 (input_bfd, x, location);
1624 #else
1625       abort ();
1626 #endif
1627       break;
1628     }
1629 }
1630
1631 /*
1632 DOCDD
1633 INODE
1634         howto manager,  , typedef arelent, Relocations
1635
1636 SUBSECTION
1637         The howto manager
1638
1639         When an application wants to create a relocation, but doesn't
1640         know what the target machine might call it, it can find out by
1641         using this bit of code.
1642
1643 */
1644
1645 /*
1646 TYPEDEF
1647         bfd_reloc_code_type
1648
1649 DESCRIPTION
1650         The insides of a reloc code.  The idea is that, eventually, there
1651         will be one enumerator for every type of relocation we ever do.
1652         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1653         return a howto pointer.
1654
1655         This does mean that the application must determine the correct
1656         enumerator value; you can't get a howto pointer from a random set
1657         of attributes.
1658
1659 SENUM
1660    bfd_reloc_code_real
1661
1662 ENUM
1663   BFD_RELOC_64
1664 ENUMX
1665   BFD_RELOC_32
1666 ENUMX
1667   BFD_RELOC_26
1668 ENUMX
1669   BFD_RELOC_24
1670 ENUMX
1671   BFD_RELOC_16
1672 ENUMX
1673   BFD_RELOC_14
1674 ENUMX
1675   BFD_RELOC_8
1676 ENUMDOC
1677   Basic absolute relocations of N bits.
1678
1679 ENUM
1680   BFD_RELOC_64_PCREL
1681 ENUMX
1682   BFD_RELOC_32_PCREL
1683 ENUMX
1684   BFD_RELOC_24_PCREL
1685 ENUMX
1686   BFD_RELOC_16_PCREL
1687 ENUMX
1688   BFD_RELOC_12_PCREL
1689 ENUMX
1690   BFD_RELOC_8_PCREL
1691 ENUMDOC
1692   PC-relative relocations.  Sometimes these are relative to the address
1693 of the relocation itself; sometimes they are relative to the start of
1694 the section containing the relocation.  It depends on the specific target.
1695
1696 The 24-bit relocation is used in some Intel 960 configurations.
1697
1698 ENUM
1699   BFD_RELOC_32_SECREL
1700 ENUMDOC
1701   Section relative relocations.  Some targets need this for DWARF2.
1702
1703 ENUM
1704   BFD_RELOC_32_GOT_PCREL
1705 ENUMX
1706   BFD_RELOC_16_GOT_PCREL
1707 ENUMX
1708   BFD_RELOC_8_GOT_PCREL
1709 ENUMX
1710   BFD_RELOC_32_GOTOFF
1711 ENUMX
1712   BFD_RELOC_16_GOTOFF
1713 ENUMX
1714   BFD_RELOC_LO16_GOTOFF
1715 ENUMX
1716   BFD_RELOC_HI16_GOTOFF
1717 ENUMX
1718   BFD_RELOC_HI16_S_GOTOFF
1719 ENUMX
1720   BFD_RELOC_8_GOTOFF
1721 ENUMX
1722   BFD_RELOC_64_PLT_PCREL
1723 ENUMX
1724   BFD_RELOC_32_PLT_PCREL
1725 ENUMX
1726   BFD_RELOC_24_PLT_PCREL
1727 ENUMX
1728   BFD_RELOC_16_PLT_PCREL
1729 ENUMX
1730   BFD_RELOC_8_PLT_PCREL
1731 ENUMX
1732   BFD_RELOC_64_PLTOFF
1733 ENUMX
1734   BFD_RELOC_32_PLTOFF
1735 ENUMX
1736   BFD_RELOC_16_PLTOFF
1737 ENUMX
1738   BFD_RELOC_LO16_PLTOFF
1739 ENUMX
1740   BFD_RELOC_HI16_PLTOFF
1741 ENUMX
1742   BFD_RELOC_HI16_S_PLTOFF
1743 ENUMX
1744   BFD_RELOC_8_PLTOFF
1745 ENUMDOC
1746   For ELF.
1747
1748 ENUM
1749   BFD_RELOC_SIZE32
1750 ENUMX
1751   BFD_RELOC_SIZE64
1752 ENUMDOC
1753   Size relocations.
1754
1755 ENUM
1756   BFD_RELOC_68K_GLOB_DAT
1757 ENUMX
1758   BFD_RELOC_68K_JMP_SLOT
1759 ENUMX
1760   BFD_RELOC_68K_RELATIVE
1761 ENUMX
1762   BFD_RELOC_68K_TLS_GD32
1763 ENUMX
1764   BFD_RELOC_68K_TLS_GD16
1765 ENUMX
1766   BFD_RELOC_68K_TLS_GD8
1767 ENUMX
1768   BFD_RELOC_68K_TLS_LDM32
1769 ENUMX
1770   BFD_RELOC_68K_TLS_LDM16
1771 ENUMX
1772   BFD_RELOC_68K_TLS_LDM8
1773 ENUMX
1774   BFD_RELOC_68K_TLS_LDO32
1775 ENUMX
1776   BFD_RELOC_68K_TLS_LDO16
1777 ENUMX
1778   BFD_RELOC_68K_TLS_LDO8
1779 ENUMX
1780   BFD_RELOC_68K_TLS_IE32
1781 ENUMX
1782   BFD_RELOC_68K_TLS_IE16
1783 ENUMX
1784   BFD_RELOC_68K_TLS_IE8
1785 ENUMX
1786   BFD_RELOC_68K_TLS_LE32
1787 ENUMX
1788   BFD_RELOC_68K_TLS_LE16
1789 ENUMX
1790   BFD_RELOC_68K_TLS_LE8
1791 ENUMDOC
1792   Relocations used by 68K ELF.
1793
1794 ENUM
1795   BFD_RELOC_32_BASEREL
1796 ENUMX
1797   BFD_RELOC_16_BASEREL
1798 ENUMX
1799   BFD_RELOC_LO16_BASEREL
1800 ENUMX
1801   BFD_RELOC_HI16_BASEREL
1802 ENUMX
1803   BFD_RELOC_HI16_S_BASEREL
1804 ENUMX
1805   BFD_RELOC_8_BASEREL
1806 ENUMX
1807   BFD_RELOC_RVA
1808 ENUMDOC
1809   Linkage-table relative.
1810
1811 ENUM
1812   BFD_RELOC_8_FFnn
1813 ENUMDOC
1814   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1815
1816 ENUM
1817   BFD_RELOC_32_PCREL_S2
1818 ENUMX
1819   BFD_RELOC_16_PCREL_S2
1820 ENUMX
1821   BFD_RELOC_23_PCREL_S2
1822 ENUMDOC
1823   These PC-relative relocations are stored as word displacements --
1824 i.e., byte displacements shifted right two bits.  The 30-bit word
1825 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1826 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1827 signed 16-bit displacement is used on the MIPS, and the 23-bit
1828 displacement is used on the Alpha.
1829
1830 ENUM
1831   BFD_RELOC_HI22
1832 ENUMX
1833   BFD_RELOC_LO10
1834 ENUMDOC
1835   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1836 the target word.  These are used on the SPARC.
1837
1838 ENUM
1839   BFD_RELOC_GPREL16
1840 ENUMX
1841   BFD_RELOC_GPREL32
1842 ENUMDOC
1843   For systems that allocate a Global Pointer register, these are
1844 displacements off that register.  These relocation types are
1845 handled specially, because the value the register will have is
1846 decided relatively late.
1847
1848 ENUM
1849   BFD_RELOC_I960_CALLJ
1850 ENUMDOC
1851   Reloc types used for i960/b.out.
1852
1853 ENUM
1854   BFD_RELOC_NONE
1855 ENUMX
1856   BFD_RELOC_SPARC_WDISP22
1857 ENUMX
1858   BFD_RELOC_SPARC22
1859 ENUMX
1860   BFD_RELOC_SPARC13
1861 ENUMX
1862   BFD_RELOC_SPARC_GOT10
1863 ENUMX
1864   BFD_RELOC_SPARC_GOT13
1865 ENUMX
1866   BFD_RELOC_SPARC_GOT22
1867 ENUMX
1868   BFD_RELOC_SPARC_PC10
1869 ENUMX
1870   BFD_RELOC_SPARC_PC22
1871 ENUMX
1872   BFD_RELOC_SPARC_WPLT30
1873 ENUMX
1874   BFD_RELOC_SPARC_COPY
1875 ENUMX
1876   BFD_RELOC_SPARC_GLOB_DAT
1877 ENUMX
1878   BFD_RELOC_SPARC_JMP_SLOT
1879 ENUMX
1880   BFD_RELOC_SPARC_RELATIVE
1881 ENUMX
1882   BFD_RELOC_SPARC_UA16
1883 ENUMX
1884   BFD_RELOC_SPARC_UA32
1885 ENUMX
1886   BFD_RELOC_SPARC_UA64
1887 ENUMX
1888   BFD_RELOC_SPARC_GOTDATA_HIX22
1889 ENUMX
1890   BFD_RELOC_SPARC_GOTDATA_LOX10
1891 ENUMX
1892   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1893 ENUMX
1894   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1895 ENUMX
1896   BFD_RELOC_SPARC_GOTDATA_OP
1897 ENUMX
1898   BFD_RELOC_SPARC_JMP_IREL
1899 ENUMX
1900   BFD_RELOC_SPARC_IRELATIVE
1901 ENUMDOC
1902   SPARC ELF relocations.  There is probably some overlap with other
1903   relocation types already defined.
1904
1905 ENUM
1906   BFD_RELOC_SPARC_BASE13
1907 ENUMX
1908   BFD_RELOC_SPARC_BASE22
1909 ENUMDOC
1910   I think these are specific to SPARC a.out (e.g., Sun 4).
1911
1912 ENUMEQ
1913   BFD_RELOC_SPARC_64
1914   BFD_RELOC_64
1915 ENUMX
1916   BFD_RELOC_SPARC_10
1917 ENUMX
1918   BFD_RELOC_SPARC_11
1919 ENUMX
1920   BFD_RELOC_SPARC_OLO10
1921 ENUMX
1922   BFD_RELOC_SPARC_HH22
1923 ENUMX
1924   BFD_RELOC_SPARC_HM10
1925 ENUMX
1926   BFD_RELOC_SPARC_LM22
1927 ENUMX
1928   BFD_RELOC_SPARC_PC_HH22
1929 ENUMX
1930   BFD_RELOC_SPARC_PC_HM10
1931 ENUMX
1932   BFD_RELOC_SPARC_PC_LM22
1933 ENUMX
1934   BFD_RELOC_SPARC_WDISP16
1935 ENUMX
1936   BFD_RELOC_SPARC_WDISP19
1937 ENUMX
1938   BFD_RELOC_SPARC_7
1939 ENUMX
1940   BFD_RELOC_SPARC_6
1941 ENUMX
1942   BFD_RELOC_SPARC_5
1943 ENUMEQX
1944   BFD_RELOC_SPARC_DISP64
1945   BFD_RELOC_64_PCREL
1946 ENUMX
1947   BFD_RELOC_SPARC_PLT32
1948 ENUMX
1949   BFD_RELOC_SPARC_PLT64
1950 ENUMX
1951   BFD_RELOC_SPARC_HIX22
1952 ENUMX
1953   BFD_RELOC_SPARC_LOX10
1954 ENUMX
1955   BFD_RELOC_SPARC_H44
1956 ENUMX
1957   BFD_RELOC_SPARC_M44
1958 ENUMX
1959   BFD_RELOC_SPARC_L44
1960 ENUMX
1961   BFD_RELOC_SPARC_REGISTER
1962 ENUMX
1963   BFD_RELOC_SPARC_H34
1964 ENUMX
1965   BFD_RELOC_SPARC_SIZE32
1966 ENUMX
1967   BFD_RELOC_SPARC_SIZE64
1968 ENUMX
1969   BFD_RELOC_SPARC_WDISP10
1970 ENUMDOC
1971   SPARC64 relocations
1972
1973 ENUM
1974   BFD_RELOC_SPARC_REV32
1975 ENUMDOC
1976   SPARC little endian relocation
1977 ENUM
1978   BFD_RELOC_SPARC_TLS_GD_HI22
1979 ENUMX
1980   BFD_RELOC_SPARC_TLS_GD_LO10
1981 ENUMX
1982   BFD_RELOC_SPARC_TLS_GD_ADD
1983 ENUMX
1984   BFD_RELOC_SPARC_TLS_GD_CALL
1985 ENUMX
1986   BFD_RELOC_SPARC_TLS_LDM_HI22
1987 ENUMX
1988   BFD_RELOC_SPARC_TLS_LDM_LO10
1989 ENUMX
1990   BFD_RELOC_SPARC_TLS_LDM_ADD
1991 ENUMX
1992   BFD_RELOC_SPARC_TLS_LDM_CALL
1993 ENUMX
1994   BFD_RELOC_SPARC_TLS_LDO_HIX22
1995 ENUMX
1996   BFD_RELOC_SPARC_TLS_LDO_LOX10
1997 ENUMX
1998   BFD_RELOC_SPARC_TLS_LDO_ADD
1999 ENUMX
2000   BFD_RELOC_SPARC_TLS_IE_HI22
2001 ENUMX
2002   BFD_RELOC_SPARC_TLS_IE_LO10
2003 ENUMX
2004   BFD_RELOC_SPARC_TLS_IE_LD
2005 ENUMX
2006   BFD_RELOC_SPARC_TLS_IE_LDX
2007 ENUMX
2008   BFD_RELOC_SPARC_TLS_IE_ADD
2009 ENUMX
2010   BFD_RELOC_SPARC_TLS_LE_HIX22
2011 ENUMX
2012   BFD_RELOC_SPARC_TLS_LE_LOX10
2013 ENUMX
2014   BFD_RELOC_SPARC_TLS_DTPMOD32
2015 ENUMX
2016   BFD_RELOC_SPARC_TLS_DTPMOD64
2017 ENUMX
2018   BFD_RELOC_SPARC_TLS_DTPOFF32
2019 ENUMX
2020   BFD_RELOC_SPARC_TLS_DTPOFF64
2021 ENUMX
2022   BFD_RELOC_SPARC_TLS_TPOFF32
2023 ENUMX
2024   BFD_RELOC_SPARC_TLS_TPOFF64
2025 ENUMDOC
2026   SPARC TLS relocations
2027
2028 ENUM
2029   BFD_RELOC_SPU_IMM7
2030 ENUMX
2031   BFD_RELOC_SPU_IMM8
2032 ENUMX
2033   BFD_RELOC_SPU_IMM10
2034 ENUMX
2035   BFD_RELOC_SPU_IMM10W
2036 ENUMX
2037   BFD_RELOC_SPU_IMM16
2038 ENUMX
2039   BFD_RELOC_SPU_IMM16W
2040 ENUMX
2041   BFD_RELOC_SPU_IMM18
2042 ENUMX
2043   BFD_RELOC_SPU_PCREL9a
2044 ENUMX
2045   BFD_RELOC_SPU_PCREL9b
2046 ENUMX
2047   BFD_RELOC_SPU_PCREL16
2048 ENUMX
2049   BFD_RELOC_SPU_LO16
2050 ENUMX
2051   BFD_RELOC_SPU_HI16
2052 ENUMX
2053   BFD_RELOC_SPU_PPU32
2054 ENUMX
2055   BFD_RELOC_SPU_PPU64
2056 ENUMX
2057   BFD_RELOC_SPU_ADD_PIC
2058 ENUMDOC
2059   SPU Relocations.
2060
2061 ENUM
2062   BFD_RELOC_ALPHA_GPDISP_HI16
2063 ENUMDOC
2064   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2065      "addend" in some special way.
2066   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2067      writing; when reading, it will be the absolute section symbol.  The
2068      addend is the displacement in bytes of the "lda" instruction from
2069      the "ldah" instruction (which is at the address of this reloc).
2070 ENUM
2071   BFD_RELOC_ALPHA_GPDISP_LO16
2072 ENUMDOC
2073   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2074      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2075      relocations out, and is filled in with the file's GP value on
2076      reading, for convenience.
2077
2078 ENUM
2079   BFD_RELOC_ALPHA_GPDISP
2080 ENUMDOC
2081   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2082      relocation except that there is no accompanying GPDISP_LO16
2083      relocation.
2084
2085 ENUM
2086   BFD_RELOC_ALPHA_LITERAL
2087 ENUMX
2088   BFD_RELOC_ALPHA_ELF_LITERAL
2089 ENUMX
2090   BFD_RELOC_ALPHA_LITUSE
2091 ENUMDOC
2092   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2093      the assembler turns it into a LDQ instruction to load the address of
2094      the symbol, and then fills in a register in the real instruction.
2095
2096      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2097      section symbol.  The addend is ignored when writing, but is filled
2098      in with the file's GP value on reading, for convenience, as with the
2099      GPDISP_LO16 reloc.
2100
2101      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2102      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2103      but it generates output not based on the position within the .got
2104      section, but relative to the GP value chosen for the file during the
2105      final link stage.
2106
2107      The LITUSE reloc, on the instruction using the loaded address, gives
2108      information to the linker that it might be able to use to optimize
2109      away some literal section references.  The symbol is ignored (read
2110      as the absolute section symbol), and the "addend" indicates the type
2111      of instruction using the register:
2112               1 - "memory" fmt insn
2113               2 - byte-manipulation (byte offset reg)
2114               3 - jsr (target of branch)
2115
2116 ENUM
2117   BFD_RELOC_ALPHA_HINT
2118 ENUMDOC
2119   The HINT relocation indicates a value that should be filled into the
2120      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2121      prediction logic which may be provided on some processors.
2122
2123 ENUM
2124   BFD_RELOC_ALPHA_LINKAGE
2125 ENUMDOC
2126   The LINKAGE relocation outputs a linkage pair in the object file,
2127      which is filled by the linker.
2128
2129 ENUM
2130   BFD_RELOC_ALPHA_CODEADDR
2131 ENUMDOC
2132   The CODEADDR relocation outputs a STO_CA in the object file,
2133      which is filled by the linker.
2134
2135 ENUM
2136   BFD_RELOC_ALPHA_GPREL_HI16
2137 ENUMX
2138   BFD_RELOC_ALPHA_GPREL_LO16
2139 ENUMDOC
2140   The GPREL_HI/LO relocations together form a 32-bit offset from the
2141      GP register.
2142
2143 ENUM
2144   BFD_RELOC_ALPHA_BRSGP
2145 ENUMDOC
2146   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2147   share a common GP, and the target address is adjusted for
2148   STO_ALPHA_STD_GPLOAD.
2149
2150 ENUM
2151   BFD_RELOC_ALPHA_NOP
2152 ENUMDOC
2153   The NOP relocation outputs a NOP if the longword displacement
2154      between two procedure entry points is < 2^21.
2155
2156 ENUM
2157   BFD_RELOC_ALPHA_BSR
2158 ENUMDOC
2159   The BSR relocation outputs a BSR if the longword displacement
2160      between two procedure entry points is < 2^21.
2161
2162 ENUM
2163   BFD_RELOC_ALPHA_LDA
2164 ENUMDOC
2165   The LDA relocation outputs a LDA if the longword displacement
2166      between two procedure entry points is < 2^16.
2167
2168 ENUM
2169   BFD_RELOC_ALPHA_BOH
2170 ENUMDOC
2171   The BOH relocation outputs a BSR if the longword displacement
2172      between two procedure entry points is < 2^21, or else a hint.
2173
2174 ENUM
2175   BFD_RELOC_ALPHA_TLSGD
2176 ENUMX
2177   BFD_RELOC_ALPHA_TLSLDM
2178 ENUMX
2179   BFD_RELOC_ALPHA_DTPMOD64
2180 ENUMX
2181   BFD_RELOC_ALPHA_GOTDTPREL16
2182 ENUMX
2183   BFD_RELOC_ALPHA_DTPREL64
2184 ENUMX
2185   BFD_RELOC_ALPHA_DTPREL_HI16
2186 ENUMX
2187   BFD_RELOC_ALPHA_DTPREL_LO16
2188 ENUMX
2189   BFD_RELOC_ALPHA_DTPREL16
2190 ENUMX
2191   BFD_RELOC_ALPHA_GOTTPREL16
2192 ENUMX
2193   BFD_RELOC_ALPHA_TPREL64
2194 ENUMX
2195   BFD_RELOC_ALPHA_TPREL_HI16
2196 ENUMX
2197   BFD_RELOC_ALPHA_TPREL_LO16
2198 ENUMX
2199   BFD_RELOC_ALPHA_TPREL16
2200 ENUMDOC
2201   Alpha thread-local storage relocations.
2202
2203 ENUM
2204   BFD_RELOC_MIPS_JMP
2205 ENUMX
2206   BFD_RELOC_MICROMIPS_JMP
2207 ENUMDOC
2208   The MIPS jump instruction.
2209
2210 ENUM
2211   BFD_RELOC_MIPS16_JMP
2212 ENUMDOC
2213   The MIPS16 jump instruction.
2214
2215 ENUM
2216   BFD_RELOC_MIPS16_GPREL
2217 ENUMDOC
2218   MIPS16 GP relative reloc.
2219
2220 ENUM
2221   BFD_RELOC_HI16
2222 ENUMDOC
2223   High 16 bits of 32-bit value; simple reloc.
2224
2225 ENUM
2226   BFD_RELOC_HI16_S
2227 ENUMDOC
2228   High 16 bits of 32-bit value but the low 16 bits will be sign
2229      extended and added to form the final result.  If the low 16
2230      bits form a negative number, we need to add one to the high value
2231      to compensate for the borrow when the low bits are added.
2232
2233 ENUM
2234   BFD_RELOC_LO16
2235 ENUMDOC
2236   Low 16 bits.
2237
2238 ENUM
2239   BFD_RELOC_HI16_PCREL
2240 ENUMDOC
2241   High 16 bits of 32-bit pc-relative value
2242 ENUM
2243   BFD_RELOC_HI16_S_PCREL
2244 ENUMDOC
2245   High 16 bits of 32-bit pc-relative value, adjusted
2246 ENUM
2247   BFD_RELOC_LO16_PCREL
2248 ENUMDOC
2249   Low 16 bits of pc-relative value
2250
2251 ENUM
2252   BFD_RELOC_MIPS16_GOT16
2253 ENUMX
2254   BFD_RELOC_MIPS16_CALL16
2255 ENUMDOC
2256   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2257      16-bit immediate fields
2258 ENUM
2259   BFD_RELOC_MIPS16_HI16
2260 ENUMDOC
2261   MIPS16 high 16 bits of 32-bit value.
2262 ENUM
2263   BFD_RELOC_MIPS16_HI16_S
2264 ENUMDOC
2265   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2266      extended and added to form the final result.  If the low 16
2267      bits form a negative number, we need to add one to the high value
2268      to compensate for the borrow when the low bits are added.
2269 ENUM
2270   BFD_RELOC_MIPS16_LO16
2271 ENUMDOC
2272   MIPS16 low 16 bits.
2273
2274 ENUM
2275   BFD_RELOC_MIPS16_TLS_GD
2276 ENUMX
2277   BFD_RELOC_MIPS16_TLS_LDM
2278 ENUMX
2279   BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2280 ENUMX
2281   BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2282 ENUMX
2283   BFD_RELOC_MIPS16_TLS_GOTTPREL
2284 ENUMX
2285   BFD_RELOC_MIPS16_TLS_TPREL_HI16
2286 ENUMX
2287   BFD_RELOC_MIPS16_TLS_TPREL_LO16
2288 ENUMDOC
2289   MIPS16 TLS relocations
2290
2291 ENUM
2292   BFD_RELOC_MIPS_LITERAL
2293 ENUMX
2294   BFD_RELOC_MICROMIPS_LITERAL
2295 ENUMDOC
2296   Relocation against a MIPS literal section.
2297
2298 ENUM
2299   BFD_RELOC_MICROMIPS_7_PCREL_S1
2300 ENUMX
2301   BFD_RELOC_MICROMIPS_10_PCREL_S1
2302 ENUMX
2303   BFD_RELOC_MICROMIPS_16_PCREL_S1
2304 ENUMDOC
2305   microMIPS PC-relative relocations.
2306
2307 ENUM
2308   BFD_RELOC_MIPS_21_PCREL_S2
2309 ENUMX
2310   BFD_RELOC_MIPS_26_PCREL_S2
2311 ENUMX
2312   BFD_RELOC_MIPS_18_PCREL_S3
2313 ENUMX
2314   BFD_RELOC_MIPS_19_PCREL_S2
2315 ENUMDOC
2316   MIPS PC-relative relocations.
2317
2318 ENUM
2319   BFD_RELOC_MICROMIPS_GPREL16
2320 ENUMX
2321   BFD_RELOC_MICROMIPS_HI16
2322 ENUMX
2323   BFD_RELOC_MICROMIPS_HI16_S
2324 ENUMX
2325   BFD_RELOC_MICROMIPS_LO16
2326 ENUMDOC
2327   microMIPS versions of generic BFD relocs.
2328
2329 ENUM
2330   BFD_RELOC_MIPS_GOT16
2331 ENUMX
2332   BFD_RELOC_MICROMIPS_GOT16
2333 ENUMX
2334   BFD_RELOC_MIPS_CALL16
2335 ENUMX
2336   BFD_RELOC_MICROMIPS_CALL16
2337 ENUMX
2338   BFD_RELOC_MIPS_GOT_HI16
2339 ENUMX
2340   BFD_RELOC_MICROMIPS_GOT_HI16
2341 ENUMX
2342   BFD_RELOC_MIPS_GOT_LO16
2343 ENUMX
2344   BFD_RELOC_MICROMIPS_GOT_LO16
2345 ENUMX
2346   BFD_RELOC_MIPS_CALL_HI16
2347 ENUMX
2348   BFD_RELOC_MICROMIPS_CALL_HI16
2349 ENUMX
2350   BFD_RELOC_MIPS_CALL_LO16
2351 ENUMX
2352   BFD_RELOC_MICROMIPS_CALL_LO16
2353 ENUMX
2354   BFD_RELOC_MIPS_SUB
2355 ENUMX
2356   BFD_RELOC_MICROMIPS_SUB
2357 ENUMX
2358   BFD_RELOC_MIPS_GOT_PAGE
2359 ENUMX
2360   BFD_RELOC_MICROMIPS_GOT_PAGE
2361 ENUMX
2362   BFD_RELOC_MIPS_GOT_OFST
2363 ENUMX
2364   BFD_RELOC_MICROMIPS_GOT_OFST
2365 ENUMX
2366   BFD_RELOC_MIPS_GOT_DISP
2367 ENUMX
2368   BFD_RELOC_MICROMIPS_GOT_DISP
2369 ENUMX
2370   BFD_RELOC_MIPS_SHIFT5
2371 ENUMX
2372   BFD_RELOC_MIPS_SHIFT6
2373 ENUMX
2374   BFD_RELOC_MIPS_INSERT_A
2375 ENUMX
2376   BFD_RELOC_MIPS_INSERT_B
2377 ENUMX
2378   BFD_RELOC_MIPS_DELETE
2379 ENUMX
2380   BFD_RELOC_MIPS_HIGHEST
2381 ENUMX
2382   BFD_RELOC_MICROMIPS_HIGHEST
2383 ENUMX
2384   BFD_RELOC_MIPS_HIGHER
2385 ENUMX
2386   BFD_RELOC_MICROMIPS_HIGHER
2387 ENUMX
2388   BFD_RELOC_MIPS_SCN_DISP
2389 ENUMX
2390   BFD_RELOC_MICROMIPS_SCN_DISP
2391 ENUMX
2392   BFD_RELOC_MIPS_REL16
2393 ENUMX
2394   BFD_RELOC_MIPS_RELGOT
2395 ENUMX
2396   BFD_RELOC_MIPS_JALR
2397 ENUMX
2398   BFD_RELOC_MICROMIPS_JALR
2399 ENUMX
2400   BFD_RELOC_MIPS_TLS_DTPMOD32
2401 ENUMX
2402   BFD_RELOC_MIPS_TLS_DTPREL32
2403 ENUMX
2404   BFD_RELOC_MIPS_TLS_DTPMOD64
2405 ENUMX
2406   BFD_RELOC_MIPS_TLS_DTPREL64
2407 ENUMX
2408   BFD_RELOC_MIPS_TLS_GD
2409 ENUMX
2410   BFD_RELOC_MICROMIPS_TLS_GD
2411 ENUMX
2412   BFD_RELOC_MIPS_TLS_LDM
2413 ENUMX
2414   BFD_RELOC_MICROMIPS_TLS_LDM
2415 ENUMX
2416   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2417 ENUMX
2418   BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2419 ENUMX
2420   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2421 ENUMX
2422   BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2423 ENUMX
2424   BFD_RELOC_MIPS_TLS_GOTTPREL
2425 ENUMX
2426   BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2427 ENUMX
2428   BFD_RELOC_MIPS_TLS_TPREL32
2429 ENUMX
2430   BFD_RELOC_MIPS_TLS_TPREL64
2431 ENUMX
2432   BFD_RELOC_MIPS_TLS_TPREL_HI16
2433 ENUMX
2434   BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2435 ENUMX
2436   BFD_RELOC_MIPS_TLS_TPREL_LO16
2437 ENUMX
2438   BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2439 ENUMX
2440   BFD_RELOC_MIPS_EH
2441 ENUMDOC
2442   MIPS ELF relocations.
2443 COMMENT
2444
2445 ENUM
2446   BFD_RELOC_MIPS_COPY
2447 ENUMX
2448   BFD_RELOC_MIPS_JUMP_SLOT
2449 ENUMDOC
2450   MIPS ELF relocations (VxWorks and PLT extensions).
2451 COMMENT
2452
2453 ENUM
2454   BFD_RELOC_MOXIE_10_PCREL
2455 ENUMDOC
2456   Moxie ELF relocations.
2457 COMMENT
2458
2459 ENUM
2460   BFD_RELOC_FT32_10
2461 ENUMX
2462   BFD_RELOC_FT32_20
2463 ENUMX
2464   BFD_RELOC_FT32_17
2465 ENUMX
2466   BFD_RELOC_FT32_18
2467 ENUMDOC
2468   FT32 ELF relocations.
2469 COMMENT
2470
2471 ENUM
2472   BFD_RELOC_FRV_LABEL16
2473 ENUMX
2474   BFD_RELOC_FRV_LABEL24
2475 ENUMX
2476   BFD_RELOC_FRV_LO16
2477 ENUMX
2478   BFD_RELOC_FRV_HI16
2479 ENUMX
2480   BFD_RELOC_FRV_GPREL12
2481 ENUMX
2482   BFD_RELOC_FRV_GPRELU12
2483 ENUMX
2484   BFD_RELOC_FRV_GPREL32
2485 ENUMX
2486   BFD_RELOC_FRV_GPRELHI
2487 ENUMX
2488   BFD_RELOC_FRV_GPRELLO
2489 ENUMX
2490   BFD_RELOC_FRV_GOT12
2491 ENUMX
2492   BFD_RELOC_FRV_GOTHI
2493 ENUMX
2494   BFD_RELOC_FRV_GOTLO
2495 ENUMX
2496   BFD_RELOC_FRV_FUNCDESC
2497 ENUMX
2498   BFD_RELOC_FRV_FUNCDESC_GOT12
2499 ENUMX
2500   BFD_RELOC_FRV_FUNCDESC_GOTHI
2501 ENUMX
2502   BFD_RELOC_FRV_FUNCDESC_GOTLO
2503 ENUMX
2504   BFD_RELOC_FRV_FUNCDESC_VALUE
2505 ENUMX
2506   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2507 ENUMX
2508   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2509 ENUMX
2510   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2511 ENUMX
2512   BFD_RELOC_FRV_GOTOFF12
2513 ENUMX
2514   BFD_RELOC_FRV_GOTOFFHI
2515 ENUMX
2516   BFD_RELOC_FRV_GOTOFFLO
2517 ENUMX
2518   BFD_RELOC_FRV_GETTLSOFF
2519 ENUMX
2520   BFD_RELOC_FRV_TLSDESC_VALUE
2521 ENUMX
2522   BFD_RELOC_FRV_GOTTLSDESC12
2523 ENUMX
2524   BFD_RELOC_FRV_GOTTLSDESCHI
2525 ENUMX
2526   BFD_RELOC_FRV_GOTTLSDESCLO
2527 ENUMX
2528   BFD_RELOC_FRV_TLSMOFF12
2529 ENUMX
2530   BFD_RELOC_FRV_TLSMOFFHI
2531 ENUMX
2532   BFD_RELOC_FRV_TLSMOFFLO
2533 ENUMX
2534   BFD_RELOC_FRV_GOTTLSOFF12
2535 ENUMX
2536   BFD_RELOC_FRV_GOTTLSOFFHI
2537 ENUMX
2538   BFD_RELOC_FRV_GOTTLSOFFLO
2539 ENUMX
2540   BFD_RELOC_FRV_TLSOFF
2541 ENUMX
2542   BFD_RELOC_FRV_TLSDESC_RELAX
2543 ENUMX
2544   BFD_RELOC_FRV_GETTLSOFF_RELAX
2545 ENUMX
2546   BFD_RELOC_FRV_TLSOFF_RELAX
2547 ENUMX
2548   BFD_RELOC_FRV_TLSMOFF
2549 ENUMDOC
2550   Fujitsu Frv Relocations.
2551 COMMENT
2552
2553 ENUM
2554   BFD_RELOC_MN10300_GOTOFF24
2555 ENUMDOC
2556   This is a 24bit GOT-relative reloc for the mn10300.
2557 ENUM
2558   BFD_RELOC_MN10300_GOT32
2559 ENUMDOC
2560   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2561   in the instruction.
2562 ENUM
2563   BFD_RELOC_MN10300_GOT24
2564 ENUMDOC
2565   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2566   in the instruction.
2567 ENUM
2568   BFD_RELOC_MN10300_GOT16
2569 ENUMDOC
2570   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2571   in the instruction.
2572 ENUM
2573   BFD_RELOC_MN10300_COPY
2574 ENUMDOC
2575   Copy symbol at runtime.
2576 ENUM
2577   BFD_RELOC_MN10300_GLOB_DAT
2578 ENUMDOC
2579   Create GOT entry.
2580 ENUM
2581   BFD_RELOC_MN10300_JMP_SLOT
2582 ENUMDOC
2583   Create PLT entry.
2584 ENUM
2585   BFD_RELOC_MN10300_RELATIVE
2586 ENUMDOC
2587   Adjust by program base.
2588 ENUM
2589   BFD_RELOC_MN10300_SYM_DIFF
2590 ENUMDOC
2591   Together with another reloc targeted at the same location,
2592   allows for a value that is the difference of two symbols
2593   in the same section.
2594 ENUM
2595   BFD_RELOC_MN10300_ALIGN
2596 ENUMDOC
2597   The addend of this reloc is an alignment power that must
2598   be honoured at the offset's location, regardless of linker
2599   relaxation.
2600 ENUM
2601   BFD_RELOC_MN10300_TLS_GD
2602 ENUMX
2603   BFD_RELOC_MN10300_TLS_LD
2604 ENUMX
2605   BFD_RELOC_MN10300_TLS_LDO
2606 ENUMX
2607   BFD_RELOC_MN10300_TLS_GOTIE
2608 ENUMX
2609   BFD_RELOC_MN10300_TLS_IE
2610 ENUMX
2611   BFD_RELOC_MN10300_TLS_LE
2612 ENUMX
2613   BFD_RELOC_MN10300_TLS_DTPMOD
2614 ENUMX
2615   BFD_RELOC_MN10300_TLS_DTPOFF
2616 ENUMX
2617   BFD_RELOC_MN10300_TLS_TPOFF
2618 ENUMDOC
2619   Various TLS-related relocations.
2620 ENUM
2621   BFD_RELOC_MN10300_32_PCREL
2622 ENUMDOC
2623   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2624   instruction.
2625 ENUM
2626   BFD_RELOC_MN10300_16_PCREL
2627 ENUMDOC
2628   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2629   instruction.
2630 COMMENT
2631
2632 ENUM
2633   BFD_RELOC_386_GOT32
2634 ENUMX
2635   BFD_RELOC_386_PLT32
2636 ENUMX
2637   BFD_RELOC_386_COPY
2638 ENUMX
2639   BFD_RELOC_386_GLOB_DAT
2640 ENUMX
2641   BFD_RELOC_386_JUMP_SLOT
2642 ENUMX
2643   BFD_RELOC_386_RELATIVE
2644 ENUMX
2645   BFD_RELOC_386_GOTOFF
2646 ENUMX
2647   BFD_RELOC_386_GOTPC
2648 ENUMX
2649   BFD_RELOC_386_TLS_TPOFF
2650 ENUMX
2651   BFD_RELOC_386_TLS_IE
2652 ENUMX
2653   BFD_RELOC_386_TLS_GOTIE
2654 ENUMX
2655   BFD_RELOC_386_TLS_LE
2656 ENUMX
2657   BFD_RELOC_386_TLS_GD
2658 ENUMX
2659   BFD_RELOC_386_TLS_LDM
2660 ENUMX
2661   BFD_RELOC_386_TLS_LDO_32
2662 ENUMX
2663   BFD_RELOC_386_TLS_IE_32
2664 ENUMX
2665   BFD_RELOC_386_TLS_LE_32
2666 ENUMX
2667   BFD_RELOC_386_TLS_DTPMOD32
2668 ENUMX
2669   BFD_RELOC_386_TLS_DTPOFF32
2670 ENUMX
2671   BFD_RELOC_386_TLS_TPOFF32
2672 ENUMX
2673   BFD_RELOC_386_TLS_GOTDESC
2674 ENUMX
2675   BFD_RELOC_386_TLS_DESC_CALL
2676 ENUMX
2677   BFD_RELOC_386_TLS_DESC
2678 ENUMX
2679   BFD_RELOC_386_IRELATIVE
2680 ENUMX
2681   BFD_RELOC_386_GOT32X
2682 ENUMDOC
2683   i386/elf relocations
2684
2685 ENUM
2686   BFD_RELOC_X86_64_GOT32
2687 ENUMX
2688   BFD_RELOC_X86_64_PLT32
2689 ENUMX
2690   BFD_RELOC_X86_64_COPY
2691 ENUMX
2692   BFD_RELOC_X86_64_GLOB_DAT
2693 ENUMX
2694   BFD_RELOC_X86_64_JUMP_SLOT
2695 ENUMX
2696   BFD_RELOC_X86_64_RELATIVE
2697 ENUMX
2698   BFD_RELOC_X86_64_GOTPCREL
2699 ENUMX
2700   BFD_RELOC_X86_64_32S
2701 ENUMX
2702   BFD_RELOC_X86_64_DTPMOD64
2703 ENUMX
2704   BFD_RELOC_X86_64_DTPOFF64
2705 ENUMX
2706   BFD_RELOC_X86_64_TPOFF64
2707 ENUMX
2708   BFD_RELOC_X86_64_TLSGD
2709 ENUMX
2710   BFD_RELOC_X86_64_TLSLD
2711 ENUMX
2712   BFD_RELOC_X86_64_DTPOFF32
2713 ENUMX
2714   BFD_RELOC_X86_64_GOTTPOFF
2715 ENUMX
2716   BFD_RELOC_X86_64_TPOFF32
2717 ENUMX
2718   BFD_RELOC_X86_64_GOTOFF64
2719 ENUMX
2720   BFD_RELOC_X86_64_GOTPC32
2721 ENUMX
2722   BFD_RELOC_X86_64_GOT64
2723 ENUMX
2724   BFD_RELOC_X86_64_GOTPCREL64
2725 ENUMX
2726   BFD_RELOC_X86_64_GOTPC64
2727 ENUMX
2728   BFD_RELOC_X86_64_GOTPLT64
2729 ENUMX
2730   BFD_RELOC_X86_64_PLTOFF64
2731 ENUMX
2732   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2733 ENUMX
2734   BFD_RELOC_X86_64_TLSDESC_CALL
2735 ENUMX
2736   BFD_RELOC_X86_64_TLSDESC
2737 ENUMX
2738   BFD_RELOC_X86_64_IRELATIVE
2739 ENUMX
2740   BFD_RELOC_X86_64_PC32_BND
2741 ENUMX
2742   BFD_RELOC_X86_64_PLT32_BND
2743 ENUMX
2744   BFD_RELOC_X86_64_GOTPCRELX
2745 ENUMX
2746   BFD_RELOC_X86_64_REX_GOTPCRELX
2747 ENUMDOC
2748   x86-64/elf relocations
2749
2750 ENUM
2751   BFD_RELOC_NS32K_IMM_8
2752 ENUMX
2753   BFD_RELOC_NS32K_IMM_16
2754 ENUMX
2755   BFD_RELOC_NS32K_IMM_32
2756 ENUMX
2757   BFD_RELOC_NS32K_IMM_8_PCREL
2758 ENUMX
2759   BFD_RELOC_NS32K_IMM_16_PCREL
2760 ENUMX
2761   BFD_RELOC_NS32K_IMM_32_PCREL
2762 ENUMX
2763   BFD_RELOC_NS32K_DISP_8
2764 ENUMX
2765   BFD_RELOC_NS32K_DISP_16
2766 ENUMX
2767   BFD_RELOC_NS32K_DISP_32
2768 ENUMX
2769   BFD_RELOC_NS32K_DISP_8_PCREL
2770 ENUMX
2771   BFD_RELOC_NS32K_DISP_16_PCREL
2772 ENUMX
2773   BFD_RELOC_NS32K_DISP_32_PCREL
2774 ENUMDOC
2775   ns32k relocations
2776
2777 ENUM
2778   BFD_RELOC_PDP11_DISP_8_PCREL
2779 ENUMX
2780   BFD_RELOC_PDP11_DISP_6_PCREL
2781 ENUMDOC
2782   PDP11 relocations
2783
2784 ENUM
2785   BFD_RELOC_PJ_CODE_HI16
2786 ENUMX
2787   BFD_RELOC_PJ_CODE_LO16
2788 ENUMX
2789   BFD_RELOC_PJ_CODE_DIR16
2790 ENUMX
2791   BFD_RELOC_PJ_CODE_DIR32
2792 ENUMX
2793   BFD_RELOC_PJ_CODE_REL16
2794 ENUMX
2795   BFD_RELOC_PJ_CODE_REL32
2796 ENUMDOC
2797   Picojava relocs.  Not all of these appear in object files.
2798
2799 ENUM
2800   BFD_RELOC_PPC_B26
2801 ENUMX
2802   BFD_RELOC_PPC_BA26
2803 ENUMX
2804   BFD_RELOC_PPC_TOC16
2805 ENUMX
2806   BFD_RELOC_PPC_B16
2807 ENUMX
2808   BFD_RELOC_PPC_B16_BRTAKEN
2809 ENUMX
2810   BFD_RELOC_PPC_B16_BRNTAKEN
2811 ENUMX
2812   BFD_RELOC_PPC_BA16
2813 ENUMX
2814   BFD_RELOC_PPC_BA16_BRTAKEN
2815 ENUMX
2816   BFD_RELOC_PPC_BA16_BRNTAKEN
2817 ENUMX
2818   BFD_RELOC_PPC_COPY
2819 ENUMX
2820   BFD_RELOC_PPC_GLOB_DAT
2821 ENUMX
2822   BFD_RELOC_PPC_JMP_SLOT
2823 ENUMX
2824   BFD_RELOC_PPC_RELATIVE
2825 ENUMX
2826   BFD_RELOC_PPC_LOCAL24PC
2827 ENUMX
2828   BFD_RELOC_PPC_EMB_NADDR32
2829 ENUMX
2830   BFD_RELOC_PPC_EMB_NADDR16
2831 ENUMX
2832   BFD_RELOC_PPC_EMB_NADDR16_LO
2833 ENUMX
2834   BFD_RELOC_PPC_EMB_NADDR16_HI
2835 ENUMX
2836   BFD_RELOC_PPC_EMB_NADDR16_HA
2837 ENUMX
2838   BFD_RELOC_PPC_EMB_SDAI16
2839 ENUMX
2840   BFD_RELOC_PPC_EMB_SDA2I16
2841 ENUMX
2842   BFD_RELOC_PPC_EMB_SDA2REL
2843 ENUMX
2844   BFD_RELOC_PPC_EMB_SDA21
2845 ENUMX
2846   BFD_RELOC_PPC_EMB_MRKREF
2847 ENUMX
2848   BFD_RELOC_PPC_EMB_RELSEC16
2849 ENUMX
2850   BFD_RELOC_PPC_EMB_RELST_LO
2851 ENUMX
2852   BFD_RELOC_PPC_EMB_RELST_HI
2853 ENUMX
2854   BFD_RELOC_PPC_EMB_RELST_HA
2855 ENUMX
2856   BFD_RELOC_PPC_EMB_BIT_FLD
2857 ENUMX
2858   BFD_RELOC_PPC_EMB_RELSDA
2859 ENUMX
2860   BFD_RELOC_PPC_VLE_REL8
2861 ENUMX
2862   BFD_RELOC_PPC_VLE_REL15
2863 ENUMX
2864   BFD_RELOC_PPC_VLE_REL24
2865 ENUMX
2866   BFD_RELOC_PPC_VLE_LO16A
2867 ENUMX
2868   BFD_RELOC_PPC_VLE_LO16D
2869 ENUMX
2870   BFD_RELOC_PPC_VLE_HI16A
2871 ENUMX
2872   BFD_RELOC_PPC_VLE_HI16D
2873 ENUMX
2874   BFD_RELOC_PPC_VLE_HA16A
2875 ENUMX
2876   BFD_RELOC_PPC_VLE_HA16D
2877 ENUMX
2878   BFD_RELOC_PPC_VLE_SDA21
2879 ENUMX
2880   BFD_RELOC_PPC_VLE_SDA21_LO
2881 ENUMX
2882   BFD_RELOC_PPC_VLE_SDAREL_LO16A
2883 ENUMX
2884   BFD_RELOC_PPC_VLE_SDAREL_LO16D
2885 ENUMX
2886   BFD_RELOC_PPC_VLE_SDAREL_HI16A
2887 ENUMX
2888   BFD_RELOC_PPC_VLE_SDAREL_HI16D
2889 ENUMX
2890   BFD_RELOC_PPC_VLE_SDAREL_HA16A
2891 ENUMX
2892   BFD_RELOC_PPC_VLE_SDAREL_HA16D
2893 ENUMX
2894   BFD_RELOC_PPC_REL16DX_HA
2895 ENUMX
2896   BFD_RELOC_PPC64_HIGHER
2897 ENUMX
2898   BFD_RELOC_PPC64_HIGHER_S
2899 ENUMX
2900   BFD_RELOC_PPC64_HIGHEST
2901 ENUMX
2902   BFD_RELOC_PPC64_HIGHEST_S
2903 ENUMX
2904   BFD_RELOC_PPC64_TOC16_LO
2905 ENUMX
2906   BFD_RELOC_PPC64_TOC16_HI
2907 ENUMX
2908   BFD_RELOC_PPC64_TOC16_HA
2909 ENUMX
2910   BFD_RELOC_PPC64_TOC
2911 ENUMX
2912   BFD_RELOC_PPC64_PLTGOT16
2913 ENUMX
2914   BFD_RELOC_PPC64_PLTGOT16_LO
2915 ENUMX
2916   BFD_RELOC_PPC64_PLTGOT16_HI
2917 ENUMX
2918   BFD_RELOC_PPC64_PLTGOT16_HA
2919 ENUMX
2920   BFD_RELOC_PPC64_ADDR16_DS
2921 ENUMX
2922   BFD_RELOC_PPC64_ADDR16_LO_DS
2923 ENUMX
2924   BFD_RELOC_PPC64_GOT16_DS
2925 ENUMX
2926   BFD_RELOC_PPC64_GOT16_LO_DS
2927 ENUMX
2928   BFD_RELOC_PPC64_PLT16_LO_DS
2929 ENUMX
2930   BFD_RELOC_PPC64_SECTOFF_DS
2931 ENUMX
2932   BFD_RELOC_PPC64_SECTOFF_LO_DS
2933 ENUMX
2934   BFD_RELOC_PPC64_TOC16_DS
2935 ENUMX
2936   BFD_RELOC_PPC64_TOC16_LO_DS
2937 ENUMX
2938   BFD_RELOC_PPC64_PLTGOT16_DS
2939 ENUMX
2940   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2941 ENUMX
2942   BFD_RELOC_PPC64_ADDR16_HIGH
2943 ENUMX
2944   BFD_RELOC_PPC64_ADDR16_HIGHA
2945 ENUMX
2946   BFD_RELOC_PPC64_ADDR64_LOCAL
2947 ENUMX
2948   BFD_RELOC_PPC64_ENTRY
2949 ENUMDOC
2950   Power(rs6000) and PowerPC relocations.
2951
2952 ENUM
2953   BFD_RELOC_PPC_TLS
2954 ENUMX
2955   BFD_RELOC_PPC_TLSGD
2956 ENUMX
2957   BFD_RELOC_PPC_TLSLD
2958 ENUMX
2959   BFD_RELOC_PPC_DTPMOD
2960 ENUMX
2961   BFD_RELOC_PPC_TPREL16
2962 ENUMX
2963   BFD_RELOC_PPC_TPREL16_LO
2964 ENUMX
2965   BFD_RELOC_PPC_TPREL16_HI
2966 ENUMX
2967   BFD_RELOC_PPC_TPREL16_HA
2968 ENUMX
2969   BFD_RELOC_PPC_TPREL
2970 ENUMX
2971   BFD_RELOC_PPC_DTPREL16
2972 ENUMX
2973   BFD_RELOC_PPC_DTPREL16_LO
2974 ENUMX
2975   BFD_RELOC_PPC_DTPREL16_HI
2976 ENUMX
2977   BFD_RELOC_PPC_DTPREL16_HA
2978 ENUMX
2979   BFD_RELOC_PPC_DTPREL
2980 ENUMX
2981   BFD_RELOC_PPC_GOT_TLSGD16
2982 ENUMX
2983   BFD_RELOC_PPC_GOT_TLSGD16_LO
2984 ENUMX
2985   BFD_RELOC_PPC_GOT_TLSGD16_HI
2986 ENUMX
2987   BFD_RELOC_PPC_GOT_TLSGD16_HA
2988 ENUMX
2989   BFD_RELOC_PPC_GOT_TLSLD16
2990 ENUMX
2991   BFD_RELOC_PPC_GOT_TLSLD16_LO
2992 ENUMX
2993   BFD_RELOC_PPC_GOT_TLSLD16_HI
2994 ENUMX
2995   BFD_RELOC_PPC_GOT_TLSLD16_HA
2996 ENUMX
2997   BFD_RELOC_PPC_GOT_TPREL16
2998 ENUMX
2999   BFD_RELOC_PPC_GOT_TPREL16_LO
3000 ENUMX
3001   BFD_RELOC_PPC_GOT_TPREL16_HI
3002 ENUMX
3003   BFD_RELOC_PPC_GOT_TPREL16_HA
3004 ENUMX
3005   BFD_RELOC_PPC_GOT_DTPREL16
3006 ENUMX
3007   BFD_RELOC_PPC_GOT_DTPREL16_LO
3008 ENUMX
3009   BFD_RELOC_PPC_GOT_DTPREL16_HI
3010 ENUMX
3011   BFD_RELOC_PPC_GOT_DTPREL16_HA
3012 ENUMX
3013   BFD_RELOC_PPC64_TPREL16_DS
3014 ENUMX
3015   BFD_RELOC_PPC64_TPREL16_LO_DS
3016 ENUMX
3017   BFD_RELOC_PPC64_TPREL16_HIGHER
3018 ENUMX
3019   BFD_RELOC_PPC64_TPREL16_HIGHERA
3020 ENUMX
3021   BFD_RELOC_PPC64_TPREL16_HIGHEST
3022 ENUMX
3023   BFD_RELOC_PPC64_TPREL16_HIGHESTA
3024 ENUMX
3025   BFD_RELOC_PPC64_DTPREL16_DS
3026 ENUMX
3027   BFD_RELOC_PPC64_DTPREL16_LO_DS
3028 ENUMX
3029   BFD_RELOC_PPC64_DTPREL16_HIGHER
3030 ENUMX
3031   BFD_RELOC_PPC64_DTPREL16_HIGHERA
3032 ENUMX
3033   BFD_RELOC_PPC64_DTPREL16_HIGHEST
3034 ENUMX
3035   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
3036 ENUMX
3037   BFD_RELOC_PPC64_TPREL16_HIGH
3038 ENUMX
3039   BFD_RELOC_PPC64_TPREL16_HIGHA
3040 ENUMX
3041   BFD_RELOC_PPC64_DTPREL16_HIGH
3042 ENUMX
3043   BFD_RELOC_PPC64_DTPREL16_HIGHA
3044 ENUMDOC
3045   PowerPC and PowerPC64 thread-local storage relocations.
3046
3047 ENUM
3048   BFD_RELOC_I370_D12
3049 ENUMDOC
3050   IBM 370/390 relocations
3051
3052 ENUM
3053   BFD_RELOC_CTOR
3054 ENUMDOC
3055   The type of reloc used to build a constructor table - at the moment
3056   probably a 32 bit wide absolute relocation, but the target can choose.
3057   It generally does map to one of the other relocation types.
3058
3059 ENUM
3060   BFD_RELOC_ARM_PCREL_BRANCH
3061 ENUMDOC
3062   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
3063   not stored in the instruction.
3064 ENUM
3065   BFD_RELOC_ARM_PCREL_BLX
3066 ENUMDOC
3067   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
3068   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3069   field in the instruction.
3070 ENUM
3071   BFD_RELOC_THUMB_PCREL_BLX
3072 ENUMDOC
3073   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
3074   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3075   field in the instruction.
3076 ENUM
3077   BFD_RELOC_ARM_PCREL_CALL
3078 ENUMDOC
3079   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3080 ENUM
3081   BFD_RELOC_ARM_PCREL_JUMP
3082 ENUMDOC
3083   ARM 26-bit pc-relative branch for B or conditional BL instruction.
3084
3085 ENUM
3086   BFD_RELOC_THUMB_PCREL_BRANCH7
3087 ENUMX
3088   BFD_RELOC_THUMB_PCREL_BRANCH9
3089 ENUMX
3090   BFD_RELOC_THUMB_PCREL_BRANCH12
3091 ENUMX
3092   BFD_RELOC_THUMB_PCREL_BRANCH20
3093 ENUMX
3094   BFD_RELOC_THUMB_PCREL_BRANCH23
3095 ENUMX
3096   BFD_RELOC_THUMB_PCREL_BRANCH25
3097 ENUMDOC
3098   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3099   The lowest bit must be zero and is not stored in the instruction.
3100   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3101   "nn" one smaller in all cases.  Note further that BRANCH23
3102   corresponds to R_ARM_THM_CALL.
3103
3104 ENUM
3105   BFD_RELOC_ARM_OFFSET_IMM
3106 ENUMDOC
3107   12-bit immediate offset, used in ARM-format ldr and str instructions.
3108
3109 ENUM
3110   BFD_RELOC_ARM_THUMB_OFFSET
3111 ENUMDOC
3112   5-bit immediate offset, used in Thumb-format ldr and str instructions.
3113
3114 ENUM
3115   BFD_RELOC_ARM_TARGET1
3116 ENUMDOC
3117   Pc-relative or absolute relocation depending on target.  Used for
3118   entries in .init_array sections.
3119 ENUM
3120   BFD_RELOC_ARM_ROSEGREL32
3121 ENUMDOC
3122   Read-only segment base relative address.
3123 ENUM
3124   BFD_RELOC_ARM_SBREL32
3125 ENUMDOC
3126   Data segment base relative address.
3127 ENUM
3128   BFD_RELOC_ARM_TARGET2
3129 ENUMDOC
3130   This reloc is used for references to RTTI data from exception handling
3131   tables.  The actual definition depends on the target.  It may be a
3132   pc-relative or some form of GOT-indirect relocation.
3133 ENUM
3134   BFD_RELOC_ARM_PREL31
3135 ENUMDOC
3136   31-bit PC relative address.
3137 ENUM
3138   BFD_RELOC_ARM_MOVW
3139 ENUMX
3140   BFD_RELOC_ARM_MOVT
3141 ENUMX
3142   BFD_RELOC_ARM_MOVW_PCREL
3143 ENUMX
3144   BFD_RELOC_ARM_MOVT_PCREL
3145 ENUMX
3146   BFD_RELOC_ARM_THUMB_MOVW
3147 ENUMX
3148   BFD_RELOC_ARM_THUMB_MOVT
3149 ENUMX
3150   BFD_RELOC_ARM_THUMB_MOVW_PCREL
3151 ENUMX
3152   BFD_RELOC_ARM_THUMB_MOVT_PCREL
3153 ENUMDOC
3154   Low and High halfword relocations for MOVW and MOVT instructions.
3155
3156 ENUM
3157   BFD_RELOC_ARM_JUMP_SLOT
3158 ENUMX
3159   BFD_RELOC_ARM_GLOB_DAT
3160 ENUMX
3161   BFD_RELOC_ARM_GOT32
3162 ENUMX
3163   BFD_RELOC_ARM_PLT32
3164 ENUMX
3165   BFD_RELOC_ARM_RELATIVE
3166 ENUMX
3167   BFD_RELOC_ARM_GOTOFF
3168 ENUMX
3169   BFD_RELOC_ARM_GOTPC
3170 ENUMX
3171   BFD_RELOC_ARM_GOT_PREL
3172 ENUMDOC
3173   Relocations for setting up GOTs and PLTs for shared libraries.
3174
3175 ENUM
3176   BFD_RELOC_ARM_TLS_GD32
3177 ENUMX
3178   BFD_RELOC_ARM_TLS_LDO32
3179 ENUMX
3180   BFD_RELOC_ARM_TLS_LDM32
3181 ENUMX
3182   BFD_RELOC_ARM_TLS_DTPOFF32
3183 ENUMX
3184   BFD_RELOC_ARM_TLS_DTPMOD32
3185 ENUMX
3186   BFD_RELOC_ARM_TLS_TPOFF32
3187 ENUMX
3188   BFD_RELOC_ARM_TLS_IE32
3189 ENUMX
3190   BFD_RELOC_ARM_TLS_LE32
3191 ENUMX
3192   BFD_RELOC_ARM_TLS_GOTDESC
3193 ENUMX
3194   BFD_RELOC_ARM_TLS_CALL
3195 ENUMX
3196   BFD_RELOC_ARM_THM_TLS_CALL
3197 ENUMX
3198   BFD_RELOC_ARM_TLS_DESCSEQ
3199 ENUMX
3200   BFD_RELOC_ARM_THM_TLS_DESCSEQ
3201 ENUMX
3202   BFD_RELOC_ARM_TLS_DESC
3203 ENUMDOC
3204   ARM thread-local storage relocations.
3205
3206 ENUM
3207   BFD_RELOC_ARM_ALU_PC_G0_NC
3208 ENUMX
3209   BFD_RELOC_ARM_ALU_PC_G0
3210 ENUMX
3211   BFD_RELOC_ARM_ALU_PC_G1_NC
3212 ENUMX
3213   BFD_RELOC_ARM_ALU_PC_G1
3214 ENUMX
3215   BFD_RELOC_ARM_ALU_PC_G2
3216 ENUMX
3217   BFD_RELOC_ARM_LDR_PC_G0
3218 ENUMX
3219   BFD_RELOC_ARM_LDR_PC_G1
3220 ENUMX
3221   BFD_RELOC_ARM_LDR_PC_G2
3222 ENUMX
3223   BFD_RELOC_ARM_LDRS_PC_G0
3224 ENUMX
3225   BFD_RELOC_ARM_LDRS_PC_G1
3226 ENUMX
3227   BFD_RELOC_ARM_LDRS_PC_G2
3228 ENUMX
3229   BFD_RELOC_ARM_LDC_PC_G0
3230 ENUMX
3231   BFD_RELOC_ARM_LDC_PC_G1
3232 ENUMX
3233   BFD_RELOC_ARM_LDC_PC_G2
3234 ENUMX
3235   BFD_RELOC_ARM_ALU_SB_G0_NC
3236 ENUMX
3237   BFD_RELOC_ARM_ALU_SB_G0
3238 ENUMX
3239   BFD_RELOC_ARM_ALU_SB_G1_NC
3240 ENUMX
3241   BFD_RELOC_ARM_ALU_SB_G1
3242 ENUMX
3243   BFD_RELOC_ARM_ALU_SB_G2
3244 ENUMX
3245   BFD_RELOC_ARM_LDR_SB_G0
3246 ENUMX
3247   BFD_RELOC_ARM_LDR_SB_G1
3248 ENUMX
3249   BFD_RELOC_ARM_LDR_SB_G2
3250 ENUMX
3251   BFD_RELOC_ARM_LDRS_SB_G0
3252 ENUMX
3253   BFD_RELOC_ARM_LDRS_SB_G1
3254 ENUMX
3255   BFD_RELOC_ARM_LDRS_SB_G2
3256 ENUMX
3257   BFD_RELOC_ARM_LDC_SB_G0
3258 ENUMX
3259   BFD_RELOC_ARM_LDC_SB_G1
3260 ENUMX
3261   BFD_RELOC_ARM_LDC_SB_G2
3262 ENUMDOC
3263   ARM group relocations.
3264
3265 ENUM
3266   BFD_RELOC_ARM_V4BX
3267 ENUMDOC
3268   Annotation of BX instructions.
3269
3270 ENUM
3271   BFD_RELOC_ARM_IRELATIVE
3272 ENUMDOC
3273   ARM support for STT_GNU_IFUNC.
3274
3275 ENUM
3276   BFD_RELOC_ARM_THUMB_ALU_ABS_G0_NC
3277 ENUMX
3278   BFD_RELOC_ARM_THUMB_ALU_ABS_G1_NC
3279 ENUMX
3280   BFD_RELOC_ARM_THUMB_ALU_ABS_G2_NC
3281 ENUMX
3282   BFD_RELOC_ARM_THUMB_ALU_ABS_G3_NC
3283 ENUMDOC
3284   Thumb1 relocations to support execute-only code.
3285
3286 ENUM
3287   BFD_RELOC_ARM_IMMEDIATE
3288 ENUMX
3289   BFD_RELOC_ARM_ADRL_IMMEDIATE
3290 ENUMX
3291   BFD_RELOC_ARM_T32_IMMEDIATE
3292 ENUMX
3293   BFD_RELOC_ARM_T32_ADD_IMM
3294 ENUMX
3295   BFD_RELOC_ARM_T32_IMM12
3296 ENUMX
3297   BFD_RELOC_ARM_T32_ADD_PC12
3298 ENUMX
3299   BFD_RELOC_ARM_SHIFT_IMM
3300 ENUMX
3301   BFD_RELOC_ARM_SMC
3302 ENUMX
3303   BFD_RELOC_ARM_HVC
3304 ENUMX
3305   BFD_RELOC_ARM_SWI
3306 ENUMX
3307   BFD_RELOC_ARM_MULTI
3308 ENUMX
3309   BFD_RELOC_ARM_CP_OFF_IMM
3310 ENUMX
3311   BFD_RELOC_ARM_CP_OFF_IMM_S2
3312 ENUMX
3313   BFD_RELOC_ARM_T32_CP_OFF_IMM
3314 ENUMX
3315   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3316 ENUMX
3317   BFD_RELOC_ARM_ADR_IMM
3318 ENUMX
3319   BFD_RELOC_ARM_LDR_IMM
3320 ENUMX
3321   BFD_RELOC_ARM_LITERAL
3322 ENUMX
3323   BFD_RELOC_ARM_IN_POOL
3324 ENUMX
3325   BFD_RELOC_ARM_OFFSET_IMM8
3326 ENUMX
3327   BFD_RELOC_ARM_T32_OFFSET_U8
3328 ENUMX
3329   BFD_RELOC_ARM_T32_OFFSET_IMM
3330 ENUMX
3331   BFD_RELOC_ARM_HWLITERAL
3332 ENUMX
3333   BFD_RELOC_ARM_THUMB_ADD
3334 ENUMX
3335   BFD_RELOC_ARM_THUMB_IMM
3336 ENUMX
3337   BFD_RELOC_ARM_THUMB_SHIFT
3338 ENUMDOC
3339   These relocs are only used within the ARM assembler.  They are not
3340   (at present) written to any object files.
3341
3342 ENUM
3343   BFD_RELOC_SH_PCDISP8BY2
3344 ENUMX
3345   BFD_RELOC_SH_PCDISP12BY2
3346 ENUMX
3347   BFD_RELOC_SH_IMM3
3348 ENUMX
3349   BFD_RELOC_SH_IMM3U
3350 ENUMX
3351   BFD_RELOC_SH_DISP12
3352 ENUMX
3353   BFD_RELOC_SH_DISP12BY2
3354 ENUMX
3355   BFD_RELOC_SH_DISP12BY4
3356 ENUMX
3357   BFD_RELOC_SH_DISP12BY8
3358 ENUMX
3359   BFD_RELOC_SH_DISP20
3360 ENUMX
3361   BFD_RELOC_SH_DISP20BY8
3362 ENUMX
3363   BFD_RELOC_SH_IMM4
3364 ENUMX
3365   BFD_RELOC_SH_IMM4BY2
3366 ENUMX
3367   BFD_RELOC_SH_IMM4BY4
3368 ENUMX
3369   BFD_RELOC_SH_IMM8
3370 ENUMX
3371   BFD_RELOC_SH_IMM8BY2
3372 ENUMX
3373   BFD_RELOC_SH_IMM8BY4
3374 ENUMX
3375   BFD_RELOC_SH_PCRELIMM8BY2
3376 ENUMX
3377   BFD_RELOC_SH_PCRELIMM8BY4
3378 ENUMX
3379   BFD_RELOC_SH_SWITCH16
3380 ENUMX
3381   BFD_RELOC_SH_SWITCH32
3382 ENUMX
3383   BFD_RELOC_SH_USES
3384 ENUMX
3385   BFD_RELOC_SH_COUNT
3386 ENUMX
3387   BFD_RELOC_SH_ALIGN
3388 ENUMX
3389   BFD_RELOC_SH_CODE
3390 ENUMX
3391   BFD_RELOC_SH_DATA
3392 ENUMX
3393   BFD_RELOC_SH_LABEL
3394 ENUMX
3395   BFD_RELOC_SH_LOOP_START
3396 ENUMX
3397   BFD_RELOC_SH_LOOP_END
3398 ENUMX
3399   BFD_RELOC_SH_COPY
3400 ENUMX
3401   BFD_RELOC_SH_GLOB_DAT
3402 ENUMX
3403   BFD_RELOC_SH_JMP_SLOT
3404 ENUMX
3405   BFD_RELOC_SH_RELATIVE
3406 ENUMX
3407   BFD_RELOC_SH_GOTPC
3408 ENUMX
3409   BFD_RELOC_SH_GOT_LOW16
3410 ENUMX
3411   BFD_RELOC_SH_GOT_MEDLOW16
3412 ENUMX
3413   BFD_RELOC_SH_GOT_MEDHI16
3414 ENUMX
3415   BFD_RELOC_SH_GOT_HI16
3416 ENUMX
3417   BFD_RELOC_SH_GOTPLT_LOW16
3418 ENUMX
3419   BFD_RELOC_SH_GOTPLT_MEDLOW16
3420 ENUMX
3421   BFD_RELOC_SH_GOTPLT_MEDHI16
3422 ENUMX
3423   BFD_RELOC_SH_GOTPLT_HI16
3424 ENUMX
3425   BFD_RELOC_SH_PLT_LOW16
3426 ENUMX
3427   BFD_RELOC_SH_PLT_MEDLOW16
3428 ENUMX
3429   BFD_RELOC_SH_PLT_MEDHI16
3430 ENUMX
3431   BFD_RELOC_SH_PLT_HI16
3432 ENUMX
3433   BFD_RELOC_SH_GOTOFF_LOW16
3434 ENUMX
3435   BFD_RELOC_SH_GOTOFF_MEDLOW16
3436 ENUMX
3437   BFD_RELOC_SH_GOTOFF_MEDHI16
3438 ENUMX
3439   BFD_RELOC_SH_GOTOFF_HI16
3440 ENUMX
3441   BFD_RELOC_SH_GOTPC_LOW16
3442 ENUMX
3443   BFD_RELOC_SH_GOTPC_MEDLOW16
3444 ENUMX
3445   BFD_RELOC_SH_GOTPC_MEDHI16
3446 ENUMX
3447   BFD_RELOC_SH_GOTPC_HI16
3448 ENUMX
3449   BFD_RELOC_SH_COPY64
3450 ENUMX
3451   BFD_RELOC_SH_GLOB_DAT64
3452 ENUMX
3453   BFD_RELOC_SH_JMP_SLOT64
3454 ENUMX
3455   BFD_RELOC_SH_RELATIVE64
3456 ENUMX
3457   BFD_RELOC_SH_GOT10BY4
3458 ENUMX
3459   BFD_RELOC_SH_GOT10BY8
3460 ENUMX
3461   BFD_RELOC_SH_GOTPLT10BY4
3462 ENUMX
3463   BFD_RELOC_SH_GOTPLT10BY8
3464 ENUMX
3465   BFD_RELOC_SH_GOTPLT32
3466 ENUMX
3467   BFD_RELOC_SH_SHMEDIA_CODE
3468 ENUMX
3469   BFD_RELOC_SH_IMMU5
3470 ENUMX
3471   BFD_RELOC_SH_IMMS6
3472 ENUMX
3473   BFD_RELOC_SH_IMMS6BY32
3474 ENUMX
3475   BFD_RELOC_SH_IMMU6
3476 ENUMX
3477   BFD_RELOC_SH_IMMS10
3478 ENUMX
3479   BFD_RELOC_SH_IMMS10BY2
3480 ENUMX
3481   BFD_RELOC_SH_IMMS10BY4
3482 ENUMX
3483   BFD_RELOC_SH_IMMS10BY8
3484 ENUMX
3485   BFD_RELOC_SH_IMMS16
3486 ENUMX
3487   BFD_RELOC_SH_IMMU16
3488 ENUMX
3489   BFD_RELOC_SH_IMM_LOW16
3490 ENUMX
3491   BFD_RELOC_SH_IMM_LOW16_PCREL
3492 ENUMX
3493   BFD_RELOC_SH_IMM_MEDLOW16
3494 ENUMX
3495   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3496 ENUMX
3497   BFD_RELOC_SH_IMM_MEDHI16
3498 ENUMX
3499   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3500 ENUMX
3501   BFD_RELOC_SH_IMM_HI16
3502 ENUMX
3503   BFD_RELOC_SH_IMM_HI16_PCREL
3504 ENUMX
3505   BFD_RELOC_SH_PT_16
3506 ENUMX
3507   BFD_RELOC_SH_TLS_GD_32
3508 ENUMX
3509   BFD_RELOC_SH_TLS_LD_32
3510 ENUMX
3511   BFD_RELOC_SH_TLS_LDO_32
3512 ENUMX
3513   BFD_RELOC_SH_TLS_IE_32
3514 ENUMX
3515   BFD_RELOC_SH_TLS_LE_32
3516 ENUMX
3517   BFD_RELOC_SH_TLS_DTPMOD32
3518 ENUMX
3519   BFD_RELOC_SH_TLS_DTPOFF32
3520 ENUMX
3521   BFD_RELOC_SH_TLS_TPOFF32
3522 ENUMX
3523   BFD_RELOC_SH_GOT20
3524 ENUMX
3525   BFD_RELOC_SH_GOTOFF20
3526 ENUMX
3527   BFD_RELOC_SH_GOTFUNCDESC
3528 ENUMX
3529   BFD_RELOC_SH_GOTFUNCDESC20
3530 ENUMX
3531   BFD_RELOC_SH_GOTOFFFUNCDESC
3532 ENUMX
3533   BFD_RELOC_SH_GOTOFFFUNCDESC20
3534 ENUMX
3535   BFD_RELOC_SH_FUNCDESC
3536 ENUMDOC
3537   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3538
3539 ENUM
3540   BFD_RELOC_ARC_NONE
3541 ENUMX
3542   BFD_RELOC_ARC_8
3543 ENUMX
3544   BFD_RELOC_ARC_16
3545 ENUMX
3546   BFD_RELOC_ARC_24
3547 ENUMX
3548   BFD_RELOC_ARC_32
3549 ENUMX
3550   BFD_RELOC_ARC_N8
3551 ENUMX
3552   BFD_RELOC_ARC_N16
3553 ENUMX
3554   BFD_RELOC_ARC_N24
3555 ENUMX
3556   BFD_RELOC_ARC_N32
3557 ENUMX
3558   BFD_RELOC_ARC_SDA
3559 ENUMX
3560   BFD_RELOC_ARC_SECTOFF
3561 ENUMX
3562   BFD_RELOC_ARC_S21H_PCREL
3563 ENUMX
3564   BFD_RELOC_ARC_S21W_PCREL
3565 ENUMX
3566   BFD_RELOC_ARC_S25H_PCREL
3567 ENUMX
3568   BFD_RELOC_ARC_S25W_PCREL
3569 ENUMX
3570   BFD_RELOC_ARC_SDA32
3571 ENUMX
3572   BFD_RELOC_ARC_SDA_LDST
3573 ENUMX
3574   BFD_RELOC_ARC_SDA_LDST1
3575 ENUMX
3576   BFD_RELOC_ARC_SDA_LDST2
3577 ENUMX
3578   BFD_RELOC_ARC_SDA16_LD
3579 ENUMX
3580   BFD_RELOC_ARC_SDA16_LD1
3581 ENUMX
3582   BFD_RELOC_ARC_SDA16_LD2
3583 ENUMX
3584   BFD_RELOC_ARC_S13_PCREL
3585 ENUMX
3586   BFD_RELOC_ARC_W
3587 ENUMX
3588   BFD_RELOC_ARC_32_ME
3589 ENUMX
3590   BFD_RELOC_ARC_32_ME_S
3591 ENUMX
3592   BFD_RELOC_ARC_N32_ME
3593 ENUMX
3594   BFD_RELOC_ARC_SECTOFF_ME
3595 ENUMX
3596   BFD_RELOC_ARC_SDA32_ME
3597 ENUMX
3598   BFD_RELOC_ARC_W_ME
3599 ENUMX
3600   BFD_RELOC_AC_SECTOFF_U8
3601 ENUMX
3602   BFD_RELOC_AC_SECTOFF_U8_1
3603 ENUMX
3604   BFD_RELOC_AC_SECTOFF_U8_2
3605 ENUMX
3606   BFD_RELOC_AC_SECTFOFF_S9
3607 ENUMX
3608   BFD_RELOC_AC_SECTFOFF_S9_1
3609 ENUMX
3610   BFD_RELOC_AC_SECTFOFF_S9_2
3611 ENUMX
3612   BFD_RELOC_ARC_SECTOFF_ME_1
3613 ENUMX
3614   BFD_RELOC_ARC_SECTOFF_ME_2
3615 ENUMX
3616   BFD_RELOC_ARC_SECTOFF_1
3617 ENUMX
3618   BFD_RELOC_ARC_SECTOFF_2
3619 ENUMX
3620   BFD_RELOC_ARC_SDA16_ST2
3621 ENUMX
3622   BFD_RELOC_ARC_32_PCREL
3623 ENUMX
3624   BFD_RELOC_ARC_PC32
3625 ENUMX
3626   BFD_RELOC_ARC_GOT32
3627 ENUMX
3628   BFD_RELOC_ARC_GOTPC32
3629 ENUMX
3630   BFD_RELOC_ARC_PLT32
3631 ENUMX
3632   BFD_RELOC_ARC_COPY
3633 ENUMX
3634   BFD_RELOC_ARC_GLOB_DAT
3635 ENUMX
3636   BFD_RELOC_ARC_JMP_SLOT
3637 ENUMX
3638   BFD_RELOC_ARC_RELATIVE
3639 ENUMX
3640   BFD_RELOC_ARC_GOTOFF
3641 ENUMX
3642   BFD_RELOC_ARC_GOTPC
3643 ENUMX
3644   BFD_RELOC_ARC_S21W_PCREL_PLT
3645 ENUMX
3646   BFD_RELOC_ARC_S25H_PCREL_PLT
3647 ENUMX
3648   BFD_RELOC_ARC_TLS_DTPMOD
3649 ENUMX
3650   BFD_RELOC_ARC_TLS_TPOFF
3651 ENUMX
3652   BFD_RELOC_ARC_TLS_GD_GOT
3653 ENUMX
3654   BFD_RELOC_ARC_TLS_GD_LD
3655 ENUMX
3656   BFD_RELOC_ARC_TLS_GD_CALL
3657 ENUMX
3658   BFD_RELOC_ARC_TLS_IE_GOT
3659 ENUMX
3660   BFD_RELOC_ARC_TLS_DTPOFF
3661 ENUMX
3662   BFD_RELOC_ARC_TLS_DTPOFF_S9
3663 ENUMX
3664   BFD_RELOC_ARC_TLS_LE_S9
3665 ENUMX
3666   BFD_RELOC_ARC_TLS_LE_32
3667 ENUMX
3668   BFD_RELOC_ARC_S25W_PCREL_PLT
3669 ENUMX
3670   BFD_RELOC_ARC_S21H_PCREL_PLT
3671 ENUMX
3672   BFD_RELOC_ARC_NPS_CMEM16
3673 ENUMDOC
3674   ARC relocs.
3675
3676 ENUM
3677   BFD_RELOC_BFIN_16_IMM
3678 ENUMDOC
3679   ADI Blackfin 16 bit immediate absolute reloc.
3680 ENUM
3681   BFD_RELOC_BFIN_16_HIGH
3682 ENUMDOC
3683   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3684 ENUM
3685   BFD_RELOC_BFIN_4_PCREL
3686 ENUMDOC
3687   ADI Blackfin 'a' part of LSETUP.
3688 ENUM
3689   BFD_RELOC_BFIN_5_PCREL
3690 ENUMDOC
3691   ADI Blackfin.
3692 ENUM
3693   BFD_RELOC_BFIN_16_LOW
3694 ENUMDOC
3695   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3696 ENUM
3697   BFD_RELOC_BFIN_10_PCREL
3698 ENUMDOC
3699   ADI Blackfin.
3700 ENUM
3701   BFD_RELOC_BFIN_11_PCREL
3702 ENUMDOC
3703   ADI Blackfin 'b' part of LSETUP.
3704 ENUM
3705   BFD_RELOC_BFIN_12_PCREL_JUMP
3706 ENUMDOC
3707   ADI Blackfin.
3708 ENUM
3709   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3710 ENUMDOC
3711   ADI Blackfin Short jump, pcrel.
3712 ENUM
3713   BFD_RELOC_BFIN_24_PCREL_CALL_X
3714 ENUMDOC
3715   ADI Blackfin Call.x not implemented.
3716 ENUM
3717   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3718 ENUMDOC
3719   ADI Blackfin Long Jump pcrel.
3720 ENUM
3721   BFD_RELOC_BFIN_GOT17M4
3722 ENUMX
3723   BFD_RELOC_BFIN_GOTHI
3724 ENUMX
3725   BFD_RELOC_BFIN_GOTLO
3726 ENUMX
3727   BFD_RELOC_BFIN_FUNCDESC
3728 ENUMX
3729   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3730 ENUMX
3731   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3732 ENUMX
3733   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3734 ENUMX
3735   BFD_RELOC_BFIN_FUNCDESC_VALUE
3736 ENUMX
3737   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3738 ENUMX
3739   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3740 ENUMX
3741   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3742 ENUMX
3743   BFD_RELOC_BFIN_GOTOFF17M4
3744 ENUMX
3745   BFD_RELOC_BFIN_GOTOFFHI
3746 ENUMX
3747   BFD_RELOC_BFIN_GOTOFFLO
3748 ENUMDOC
3749   ADI Blackfin FD-PIC relocations.
3750 ENUM
3751   BFD_RELOC_BFIN_GOT
3752 ENUMDOC
3753   ADI Blackfin GOT relocation.
3754 ENUM
3755   BFD_RELOC_BFIN_PLTPC
3756 ENUMDOC
3757   ADI Blackfin PLTPC relocation.
3758 ENUM
3759   BFD_ARELOC_BFIN_PUSH
3760 ENUMDOC
3761   ADI Blackfin arithmetic relocation.
3762 ENUM
3763   BFD_ARELOC_BFIN_CONST
3764 ENUMDOC
3765   ADI Blackfin arithmetic relocation.
3766 ENUM
3767   BFD_ARELOC_BFIN_ADD
3768 ENUMDOC
3769   ADI Blackfin arithmetic relocation.
3770 ENUM
3771   BFD_ARELOC_BFIN_SUB
3772 ENUMDOC
3773   ADI Blackfin arithmetic relocation.
3774 ENUM
3775   BFD_ARELOC_BFIN_MULT
3776 ENUMDOC
3777   ADI Blackfin arithmetic relocation.
3778 ENUM
3779   BFD_ARELOC_BFIN_DIV
3780 ENUMDOC
3781   ADI Blackfin arithmetic relocation.
3782 ENUM
3783   BFD_ARELOC_BFIN_MOD
3784 ENUMDOC
3785   ADI Blackfin arithmetic relocation.
3786 ENUM
3787   BFD_ARELOC_BFIN_LSHIFT
3788 ENUMDOC
3789   ADI Blackfin arithmetic relocation.
3790 ENUM
3791   BFD_ARELOC_BFIN_RSHIFT
3792 ENUMDOC
3793   ADI Blackfin arithmetic relocation.
3794 ENUM
3795   BFD_ARELOC_BFIN_AND
3796 ENUMDOC
3797   ADI Blackfin arithmetic relocation.
3798 ENUM
3799   BFD_ARELOC_BFIN_OR
3800 ENUMDOC
3801   ADI Blackfin arithmetic relocation.
3802 ENUM
3803   BFD_ARELOC_BFIN_XOR
3804 ENUMDOC
3805   ADI Blackfin arithmetic relocation.
3806 ENUM
3807   BFD_ARELOC_BFIN_LAND
3808 ENUMDOC
3809   ADI Blackfin arithmetic relocation.
3810 ENUM
3811   BFD_ARELOC_BFIN_LOR
3812 ENUMDOC
3813   ADI Blackfin arithmetic relocation.
3814 ENUM
3815   BFD_ARELOC_BFIN_LEN
3816 ENUMDOC
3817   ADI Blackfin arithmetic relocation.
3818 ENUM
3819   BFD_ARELOC_BFIN_NEG
3820 ENUMDOC
3821   ADI Blackfin arithmetic relocation.
3822 ENUM
3823   BFD_ARELOC_BFIN_COMP
3824 ENUMDOC
3825   ADI Blackfin arithmetic relocation.
3826 ENUM
3827   BFD_ARELOC_BFIN_PAGE
3828 ENUMDOC
3829   ADI Blackfin arithmetic relocation.
3830 ENUM
3831   BFD_ARELOC_BFIN_HWPAGE
3832 ENUMDOC
3833   ADI Blackfin arithmetic relocation.
3834 ENUM
3835   BFD_ARELOC_BFIN_ADDR
3836 ENUMDOC
3837   ADI Blackfin arithmetic relocation.
3838
3839 ENUM
3840   BFD_RELOC_D10V_10_PCREL_R
3841 ENUMDOC
3842   Mitsubishi D10V relocs.
3843   This is a 10-bit reloc with the right 2 bits
3844   assumed to be 0.
3845 ENUM
3846   BFD_RELOC_D10V_10_PCREL_L
3847 ENUMDOC
3848   Mitsubishi D10V relocs.
3849   This is a 10-bit reloc with the right 2 bits
3850   assumed to be 0.  This is the same as the previous reloc
3851   except it is in the left container, i.e.,
3852   shifted left 15 bits.
3853 ENUM
3854   BFD_RELOC_D10V_18
3855 ENUMDOC
3856   This is an 18-bit reloc with the right 2 bits
3857   assumed to be 0.
3858 ENUM
3859   BFD_RELOC_D10V_18_PCREL
3860 ENUMDOC
3861   This is an 18-bit reloc with the right 2 bits
3862   assumed to be 0.
3863
3864 ENUM
3865   BFD_RELOC_D30V_6
3866 ENUMDOC
3867   Mitsubishi D30V relocs.
3868   This is a 6-bit absolute reloc.
3869 ENUM
3870   BFD_RELOC_D30V_9_PCREL
3871 ENUMDOC
3872   This is a 6-bit pc-relative reloc with
3873   the right 3 bits assumed to be 0.
3874 ENUM
3875   BFD_RELOC_D30V_9_PCREL_R
3876 ENUMDOC
3877   This is a 6-bit pc-relative reloc with
3878   the right 3 bits assumed to be 0. Same
3879   as the previous reloc but on the right side
3880   of the container.
3881 ENUM
3882   BFD_RELOC_D30V_15
3883 ENUMDOC
3884   This is a 12-bit absolute reloc with the
3885   right 3 bitsassumed to be 0.
3886 ENUM
3887   BFD_RELOC_D30V_15_PCREL
3888 ENUMDOC
3889   This is a 12-bit pc-relative reloc with
3890   the right 3 bits assumed to be 0.
3891 ENUM
3892   BFD_RELOC_D30V_15_PCREL_R
3893 ENUMDOC
3894   This is a 12-bit pc-relative reloc with
3895   the right 3 bits assumed to be 0. Same
3896   as the previous reloc but on the right side
3897   of the container.
3898 ENUM
3899   BFD_RELOC_D30V_21
3900 ENUMDOC
3901   This is an 18-bit absolute reloc with
3902   the right 3 bits assumed to be 0.
3903 ENUM
3904   BFD_RELOC_D30V_21_PCREL
3905 ENUMDOC
3906   This is an 18-bit pc-relative reloc with
3907   the right 3 bits assumed to be 0.
3908 ENUM
3909   BFD_RELOC_D30V_21_PCREL_R
3910 ENUMDOC
3911   This is an 18-bit pc-relative reloc with
3912   the right 3 bits assumed to be 0. Same
3913   as the previous reloc but on the right side
3914   of the container.
3915 ENUM
3916   BFD_RELOC_D30V_32
3917 ENUMDOC
3918   This is a 32-bit absolute reloc.
3919 ENUM
3920   BFD_RELOC_D30V_32_PCREL
3921 ENUMDOC
3922   This is a 32-bit pc-relative reloc.
3923
3924 ENUM
3925   BFD_RELOC_DLX_HI16_S
3926 ENUMDOC
3927   DLX relocs
3928 ENUM
3929   BFD_RELOC_DLX_LO16
3930 ENUMDOC
3931   DLX relocs
3932 ENUM
3933   BFD_RELOC_DLX_JMP26
3934 ENUMDOC
3935   DLX relocs
3936
3937 ENUM
3938   BFD_RELOC_M32C_HI8
3939 ENUMX
3940   BFD_RELOC_M32C_RL_JUMP
3941 ENUMX
3942   BFD_RELOC_M32C_RL_1ADDR
3943 ENUMX
3944   BFD_RELOC_M32C_RL_2ADDR
3945 ENUMDOC
3946   Renesas M16C/M32C Relocations.
3947
3948 ENUM
3949   BFD_RELOC_M32R_24
3950 ENUMDOC
3951   Renesas M32R (formerly Mitsubishi M32R) relocs.
3952   This is a 24 bit absolute address.
3953 ENUM
3954   BFD_RELOC_M32R_10_PCREL
3955 ENUMDOC
3956   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3957 ENUM
3958   BFD_RELOC_M32R_18_PCREL
3959 ENUMDOC
3960   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3961 ENUM
3962   BFD_RELOC_M32R_26_PCREL
3963 ENUMDOC
3964   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3965 ENUM
3966   BFD_RELOC_M32R_HI16_ULO
3967 ENUMDOC
3968   This is a 16-bit reloc containing the high 16 bits of an address
3969   used when the lower 16 bits are treated as unsigned.
3970 ENUM
3971   BFD_RELOC_M32R_HI16_SLO
3972 ENUMDOC
3973   This is a 16-bit reloc containing the high 16 bits of an address
3974   used when the lower 16 bits are treated as signed.
3975 ENUM
3976   BFD_RELOC_M32R_LO16
3977 ENUMDOC
3978   This is a 16-bit reloc containing the lower 16 bits of an address.
3979 ENUM
3980   BFD_RELOC_M32R_SDA16
3981 ENUMDOC
3982   This is a 16-bit reloc containing the small data area offset for use in
3983   add3, load, and store instructions.
3984 ENUM
3985   BFD_RELOC_M32R_GOT24
3986 ENUMX
3987   BFD_RELOC_M32R_26_PLTREL
3988 ENUMX
3989   BFD_RELOC_M32R_COPY
3990 ENUMX
3991   BFD_RELOC_M32R_GLOB_DAT
3992 ENUMX
3993   BFD_RELOC_M32R_JMP_SLOT
3994 ENUMX
3995   BFD_RELOC_M32R_RELATIVE
3996 ENUMX
3997   BFD_RELOC_M32R_GOTOFF
3998 ENUMX
3999   BFD_RELOC_M32R_GOTOFF_HI_ULO
4000 ENUMX
4001   BFD_RELOC_M32R_GOTOFF_HI_SLO
4002 ENUMX
4003   BFD_RELOC_M32R_GOTOFF_LO
4004 ENUMX
4005   BFD_RELOC_M32R_GOTPC24
4006 ENUMX
4007   BFD_RELOC_M32R_GOT16_HI_ULO
4008 ENUMX
4009   BFD_RELOC_M32R_GOT16_HI_SLO
4010 ENUMX
4011   BFD_RELOC_M32R_GOT16_LO
4012 ENUMX
4013   BFD_RELOC_M32R_GOTPC_HI_ULO
4014 ENUMX
4015   BFD_RELOC_M32R_GOTPC_HI_SLO
4016 ENUMX
4017   BFD_RELOC_M32R_GOTPC_LO
4018 ENUMDOC
4019   For PIC.
4020
4021
4022 ENUM
4023   BFD_RELOC_NDS32_20
4024 ENUMDOC
4025   NDS32 relocs.
4026   This is a 20 bit absolute address.
4027 ENUM
4028   BFD_RELOC_NDS32_9_PCREL
4029 ENUMDOC
4030   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4031 ENUM
4032   BFD_RELOC_NDS32_WORD_9_PCREL
4033 ENUMDOC
4034   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4035 ENUM
4036   BFD_RELOC_NDS32_15_PCREL
4037 ENUMDOC
4038   This is an 15-bit reloc with the right 1 bit assumed to be 0.
4039 ENUM
4040   BFD_RELOC_NDS32_17_PCREL
4041 ENUMDOC
4042   This is an 17-bit reloc with the right 1 bit assumed to be 0.
4043 ENUM
4044   BFD_RELOC_NDS32_25_PCREL
4045 ENUMDOC
4046   This is a 25-bit reloc with the right 1 bit assumed to be 0.
4047 ENUM
4048   BFD_RELOC_NDS32_HI20
4049 ENUMDOC
4050   This is a 20-bit reloc containing the high 20 bits of an address
4051   used with the lower 12 bits
4052 ENUM
4053   BFD_RELOC_NDS32_LO12S3
4054 ENUMDOC
4055   This is a 12-bit reloc containing the lower 12 bits of an address
4056   then shift right by 3. This is used with ldi,sdi...
4057 ENUM
4058   BFD_RELOC_NDS32_LO12S2
4059 ENUMDOC
4060   This is a 12-bit reloc containing the lower 12 bits of an address
4061   then shift left by 2. This is used with lwi,swi...
4062 ENUM
4063   BFD_RELOC_NDS32_LO12S1
4064 ENUMDOC
4065   This is a 12-bit reloc containing the lower 12 bits of an address
4066   then shift left by 1. This is used with lhi,shi...
4067 ENUM
4068   BFD_RELOC_NDS32_LO12S0
4069 ENUMDOC
4070   This is a 12-bit reloc containing the lower 12 bits of an address
4071   then shift left by 0. This is used with lbisbi...
4072 ENUM
4073   BFD_RELOC_NDS32_LO12S0_ORI
4074 ENUMDOC
4075   This is a 12-bit reloc containing the lower 12 bits of an address
4076   then shift left by 0. This is only used with branch relaxations
4077 ENUM
4078   BFD_RELOC_NDS32_SDA15S3
4079 ENUMDOC
4080   This is a 15-bit reloc containing the small data area 18-bit signed offset
4081   and shift left by 3 for use in ldi, sdi...
4082 ENUM
4083   BFD_RELOC_NDS32_SDA15S2
4084 ENUMDOC
4085   This is a 15-bit reloc containing the small data area 17-bit signed offset
4086   and shift left by 2 for use in lwi, swi...
4087 ENUM
4088   BFD_RELOC_NDS32_SDA15S1
4089 ENUMDOC
4090   This is a 15-bit reloc containing the small data area 16-bit signed offset
4091   and shift left by 1 for use in lhi, shi...
4092 ENUM
4093   BFD_RELOC_NDS32_SDA15S0
4094 ENUMDOC
4095   This is a 15-bit reloc containing the small data area 15-bit signed offset
4096   and shift left by 0 for use in lbi, sbi...
4097 ENUM
4098   BFD_RELOC_NDS32_SDA16S3
4099 ENUMDOC
4100   This is a 16-bit reloc containing the small data area 16-bit signed offset
4101   and shift left by 3
4102 ENUM
4103   BFD_RELOC_NDS32_SDA17S2
4104 ENUMDOC
4105   This is a 17-bit reloc containing the small data area 17-bit signed offset
4106   and shift left by 2 for use in lwi.gp, swi.gp...
4107 ENUM
4108   BFD_RELOC_NDS32_SDA18S1
4109 ENUMDOC
4110   This is a 18-bit reloc containing the small data area 18-bit signed offset
4111   and shift left by 1 for use in lhi.gp, shi.gp...
4112 ENUM
4113   BFD_RELOC_NDS32_SDA19S0
4114 ENUMDOC
4115   This is a 19-bit reloc containing the small data area 19-bit signed offset
4116   and shift left by 0 for use in lbi.gp, sbi.gp...
4117 ENUM
4118   BFD_RELOC_NDS32_GOT20
4119 ENUMX
4120   BFD_RELOC_NDS32_9_PLTREL
4121 ENUMX
4122   BFD_RELOC_NDS32_25_PLTREL
4123 ENUMX
4124   BFD_RELOC_NDS32_COPY
4125 ENUMX
4126   BFD_RELOC_NDS32_GLOB_DAT
4127 ENUMX
4128   BFD_RELOC_NDS32_JMP_SLOT
4129 ENUMX
4130   BFD_RELOC_NDS32_RELATIVE
4131 ENUMX
4132   BFD_RELOC_NDS32_GOTOFF
4133 ENUMX
4134   BFD_RELOC_NDS32_GOTOFF_HI20
4135 ENUMX
4136   BFD_RELOC_NDS32_GOTOFF_LO12
4137 ENUMX
4138   BFD_RELOC_NDS32_GOTPC20
4139 ENUMX
4140   BFD_RELOC_NDS32_GOT_HI20
4141 ENUMX
4142   BFD_RELOC_NDS32_GOT_LO12
4143 ENUMX
4144   BFD_RELOC_NDS32_GOTPC_HI20
4145 ENUMX
4146   BFD_RELOC_NDS32_GOTPC_LO12
4147 ENUMDOC
4148   for PIC
4149 ENUM
4150   BFD_RELOC_NDS32_INSN16
4151 ENUMX
4152   BFD_RELOC_NDS32_LABEL
4153 ENUMX
4154   BFD_RELOC_NDS32_LONGCALL1
4155 ENUMX
4156   BFD_RELOC_NDS32_LONGCALL2
4157 ENUMX
4158   BFD_RELOC_NDS32_LONGCALL3
4159 ENUMX
4160   BFD_RELOC_NDS32_LONGJUMP1
4161 ENUMX
4162   BFD_RELOC_NDS32_LONGJUMP2
4163 ENUMX
4164   BFD_RELOC_NDS32_LONGJUMP3
4165 ENUMX
4166   BFD_RELOC_NDS32_LOADSTORE
4167 ENUMX
4168   BFD_RELOC_NDS32_9_FIXED
4169 ENUMX
4170   BFD_RELOC_NDS32_15_FIXED
4171 ENUMX
4172   BFD_RELOC_NDS32_17_FIXED
4173 ENUMX
4174   BFD_RELOC_NDS32_25_FIXED
4175 ENUMX
4176   BFD_RELOC_NDS32_LONGCALL4
4177 ENUMX
4178   BFD_RELOC_NDS32_LONGCALL5
4179 ENUMX
4180   BFD_RELOC_NDS32_LONGCALL6
4181 ENUMX
4182   BFD_RELOC_NDS32_LONGJUMP4
4183 ENUMX
4184   BFD_RELOC_NDS32_LONGJUMP5
4185 ENUMX
4186   BFD_RELOC_NDS32_LONGJUMP6
4187 ENUMX
4188   BFD_RELOC_NDS32_LONGJUMP7
4189 ENUMDOC
4190   for relax
4191 ENUM
4192   BFD_RELOC_NDS32_PLTREL_HI20
4193 ENUMX
4194   BFD_RELOC_NDS32_PLTREL_LO12
4195 ENUMX
4196   BFD_RELOC_NDS32_PLT_GOTREL_HI20
4197 ENUMX
4198   BFD_RELOC_NDS32_PLT_GOTREL_LO12
4199 ENUMDOC
4200   for PIC
4201 ENUM
4202   BFD_RELOC_NDS32_SDA12S2_DP
4203 ENUMX
4204   BFD_RELOC_NDS32_SDA12S2_SP
4205 ENUMX
4206   BFD_RELOC_NDS32_LO12S2_DP
4207 ENUMX
4208   BFD_RELOC_NDS32_LO12S2_SP
4209 ENUMDOC
4210   for floating point
4211 ENUM
4212   BFD_RELOC_NDS32_DWARF2_OP1
4213 ENUMX
4214   BFD_RELOC_NDS32_DWARF2_OP2
4215 ENUMX
4216   BFD_RELOC_NDS32_DWARF2_LEB
4217 ENUMDOC
4218   for dwarf2 debug_line.
4219 ENUM
4220   BFD_RELOC_NDS32_UPDATE_TA
4221 ENUMDOC
4222   for eliminate 16-bit instructions
4223 ENUM
4224   BFD_RELOC_NDS32_PLT_GOTREL_LO20
4225 ENUMX
4226   BFD_RELOC_NDS32_PLT_GOTREL_LO15
4227 ENUMX
4228   BFD_RELOC_NDS32_PLT_GOTREL_LO19
4229 ENUMX
4230   BFD_RELOC_NDS32_GOT_LO15
4231 ENUMX
4232   BFD_RELOC_NDS32_GOT_LO19
4233 ENUMX
4234   BFD_RELOC_NDS32_GOTOFF_LO15
4235 ENUMX
4236   BFD_RELOC_NDS32_GOTOFF_LO19
4237 ENUMX
4238   BFD_RELOC_NDS32_GOT15S2
4239 ENUMX
4240   BFD_RELOC_NDS32_GOT17S2
4241 ENUMDOC
4242   for PIC object relaxation
4243 ENUM
4244   BFD_RELOC_NDS32_5
4245 ENUMDOC
4246   NDS32 relocs.
4247   This is a 5 bit absolute address.
4248 ENUM
4249   BFD_RELOC_NDS32_10_UPCREL
4250 ENUMDOC
4251   This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4252 ENUM
4253   BFD_RELOC_NDS32_SDA_FP7U2_RELA
4254 ENUMDOC
4255   If fp were omitted, fp can used as another gp.
4256 ENUM
4257   BFD_RELOC_NDS32_RELAX_ENTRY
4258 ENUMX
4259   BFD_RELOC_NDS32_GOT_SUFF
4260 ENUMX
4261   BFD_RELOC_NDS32_GOTOFF_SUFF
4262 ENUMX
4263   BFD_RELOC_NDS32_PLT_GOT_SUFF
4264 ENUMX
4265   BFD_RELOC_NDS32_MULCALL_SUFF
4266 ENUMX
4267   BFD_RELOC_NDS32_PTR
4268 ENUMX
4269   BFD_RELOC_NDS32_PTR_COUNT
4270 ENUMX
4271   BFD_RELOC_NDS32_PTR_RESOLVED
4272 ENUMX
4273   BFD_RELOC_NDS32_PLTBLOCK
4274 ENUMX
4275   BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4276 ENUMX
4277   BFD_RELOC_NDS32_RELAX_REGION_END
4278 ENUMX
4279   BFD_RELOC_NDS32_MINUEND
4280 ENUMX
4281   BFD_RELOC_NDS32_SUBTRAHEND
4282 ENUMX
4283   BFD_RELOC_NDS32_DIFF8
4284 ENUMX
4285   BFD_RELOC_NDS32_DIFF16
4286 ENUMX
4287   BFD_RELOC_NDS32_DIFF32
4288 ENUMX
4289   BFD_RELOC_NDS32_DIFF_ULEB128
4290 ENUMX
4291   BFD_RELOC_NDS32_EMPTY
4292 ENUMDOC
4293   relaxation relative relocation types
4294 ENUM
4295   BFD_RELOC_NDS32_25_ABS
4296 ENUMDOC
4297   This is a 25 bit absolute address.
4298 ENUM
4299   BFD_RELOC_NDS32_DATA
4300 ENUMX
4301   BFD_RELOC_NDS32_TRAN
4302 ENUMX
4303   BFD_RELOC_NDS32_17IFC_PCREL
4304 ENUMX
4305   BFD_RELOC_NDS32_10IFCU_PCREL
4306 ENUMDOC
4307   For ex9 and ifc using.
4308 ENUM
4309   BFD_RELOC_NDS32_TPOFF
4310 ENUMX
4311   BFD_RELOC_NDS32_TLS_LE_HI20
4312 ENUMX
4313   BFD_RELOC_NDS32_TLS_LE_LO12
4314 ENUMX
4315   BFD_RELOC_NDS32_TLS_LE_ADD
4316 ENUMX
4317   BFD_RELOC_NDS32_TLS_LE_LS
4318 ENUMX
4319   BFD_RELOC_NDS32_GOTTPOFF
4320 ENUMX
4321   BFD_RELOC_NDS32_TLS_IE_HI20
4322 ENUMX
4323   BFD_RELOC_NDS32_TLS_IE_LO12S2
4324 ENUMX
4325   BFD_RELOC_NDS32_TLS_TPOFF
4326 ENUMX
4327   BFD_RELOC_NDS32_TLS_LE_20
4328 ENUMX
4329   BFD_RELOC_NDS32_TLS_LE_15S0
4330 ENUMX
4331   BFD_RELOC_NDS32_TLS_LE_15S1
4332 ENUMX
4333   BFD_RELOC_NDS32_TLS_LE_15S2
4334 ENUMDOC
4335   For TLS.
4336
4337
4338 ENUM
4339   BFD_RELOC_V850_9_PCREL
4340 ENUMDOC
4341   This is a 9-bit reloc
4342 ENUM
4343   BFD_RELOC_V850_22_PCREL
4344 ENUMDOC
4345   This is a 22-bit reloc
4346
4347 ENUM
4348   BFD_RELOC_V850_SDA_16_16_OFFSET
4349 ENUMDOC
4350   This is a 16 bit offset from the short data area pointer.
4351 ENUM
4352   BFD_RELOC_V850_SDA_15_16_OFFSET
4353 ENUMDOC
4354   This is a 16 bit offset (of which only 15 bits are used) from the
4355   short data area pointer.
4356 ENUM
4357   BFD_RELOC_V850_ZDA_16_16_OFFSET
4358 ENUMDOC
4359   This is a 16 bit offset from the zero data area pointer.
4360 ENUM
4361   BFD_RELOC_V850_ZDA_15_16_OFFSET
4362 ENUMDOC
4363   This is a 16 bit offset (of which only 15 bits are used) from the
4364   zero data area pointer.
4365 ENUM
4366   BFD_RELOC_V850_TDA_6_8_OFFSET
4367 ENUMDOC
4368   This is an 8 bit offset (of which only 6 bits are used) from the
4369   tiny data area pointer.
4370 ENUM
4371   BFD_RELOC_V850_TDA_7_8_OFFSET
4372 ENUMDOC
4373   This is an 8bit offset (of which only 7 bits are used) from the tiny
4374   data area pointer.
4375 ENUM
4376   BFD_RELOC_V850_TDA_7_7_OFFSET
4377 ENUMDOC
4378   This is a 7 bit offset from the tiny data area pointer.
4379 ENUM
4380   BFD_RELOC_V850_TDA_16_16_OFFSET
4381 ENUMDOC
4382   This is a 16 bit offset from the tiny data area pointer.
4383 COMMENT
4384 ENUM
4385   BFD_RELOC_V850_TDA_4_5_OFFSET
4386 ENUMDOC
4387   This is a 5 bit offset (of which only 4 bits are used) from the tiny
4388   data area pointer.
4389 ENUM
4390   BFD_RELOC_V850_TDA_4_4_OFFSET
4391 ENUMDOC
4392   This is a 4 bit offset from the tiny data area pointer.
4393 ENUM
4394   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4395 ENUMDOC
4396   This is a 16 bit offset from the short data area pointer, with the
4397   bits placed non-contiguously in the instruction.
4398 ENUM
4399   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4400 ENUMDOC
4401   This is a 16 bit offset from the zero data area pointer, with the
4402   bits placed non-contiguously in the instruction.
4403 ENUM
4404   BFD_RELOC_V850_CALLT_6_7_OFFSET
4405 ENUMDOC
4406   This is a 6 bit offset from the call table base pointer.
4407 ENUM
4408   BFD_RELOC_V850_CALLT_16_16_OFFSET
4409 ENUMDOC
4410   This is a 16 bit offset from the call table base pointer.
4411 ENUM
4412   BFD_RELOC_V850_LONGCALL
4413 ENUMDOC
4414   Used for relaxing indirect function calls.
4415 ENUM
4416   BFD_RELOC_V850_LONGJUMP
4417 ENUMDOC
4418   Used for relaxing indirect jumps.
4419 ENUM
4420   BFD_RELOC_V850_ALIGN
4421 ENUMDOC
4422   Used to maintain alignment whilst relaxing.
4423 ENUM
4424   BFD_RELOC_V850_LO16_SPLIT_OFFSET
4425 ENUMDOC
4426   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4427   instructions.
4428 ENUM
4429   BFD_RELOC_V850_16_PCREL
4430 ENUMDOC
4431   This is a 16-bit reloc.
4432 ENUM
4433   BFD_RELOC_V850_17_PCREL
4434 ENUMDOC
4435   This is a 17-bit reloc.
4436 ENUM
4437   BFD_RELOC_V850_23
4438 ENUMDOC
4439   This is a 23-bit reloc.
4440 ENUM
4441   BFD_RELOC_V850_32_PCREL
4442 ENUMDOC
4443   This is a 32-bit reloc.
4444 ENUM
4445   BFD_RELOC_V850_32_ABS
4446 ENUMDOC
4447   This is a 32-bit reloc.
4448 ENUM
4449   BFD_RELOC_V850_16_SPLIT_OFFSET
4450 ENUMDOC
4451   This is a 16-bit reloc.
4452 ENUM
4453   BFD_RELOC_V850_16_S1
4454 ENUMDOC
4455   This is a 16-bit reloc.
4456 ENUM
4457   BFD_RELOC_V850_LO16_S1
4458 ENUMDOC
4459   Low 16 bits. 16 bit shifted by 1.
4460 ENUM
4461   BFD_RELOC_V850_CALLT_15_16_OFFSET
4462 ENUMDOC
4463   This is a 16 bit offset from the call table base pointer.
4464 ENUM
4465   BFD_RELOC_V850_32_GOTPCREL
4466 ENUMDOC
4467   DSO relocations.
4468 ENUM
4469   BFD_RELOC_V850_16_GOT
4470 ENUMDOC
4471   DSO relocations.
4472 ENUM
4473   BFD_RELOC_V850_32_GOT
4474 ENUMDOC
4475   DSO relocations.
4476 ENUM
4477   BFD_RELOC_V850_22_PLT_PCREL
4478 ENUMDOC
4479   DSO relocations.
4480 ENUM
4481   BFD_RELOC_V850_32_PLT_PCREL
4482 ENUMDOC
4483   DSO relocations.
4484 ENUM
4485   BFD_RELOC_V850_COPY
4486 ENUMDOC
4487   DSO relocations.
4488 ENUM
4489   BFD_RELOC_V850_GLOB_DAT
4490 ENUMDOC
4491   DSO relocations.
4492 ENUM
4493   BFD_RELOC_V850_JMP_SLOT
4494 ENUMDOC
4495   DSO relocations.
4496 ENUM
4497   BFD_RELOC_V850_RELATIVE
4498 ENUMDOC
4499   DSO relocations.
4500 ENUM
4501   BFD_RELOC_V850_16_GOTOFF
4502 ENUMDOC
4503   DSO relocations.
4504 ENUM
4505   BFD_RELOC_V850_32_GOTOFF
4506 ENUMDOC
4507   DSO relocations.
4508 ENUM
4509   BFD_RELOC_V850_CODE
4510 ENUMDOC
4511   start code.
4512 ENUM
4513   BFD_RELOC_V850_DATA
4514 ENUMDOC
4515   start data in text.
4516
4517 ENUM
4518   BFD_RELOC_TIC30_LDP
4519 ENUMDOC
4520   This is a 8bit DP reloc for the tms320c30, where the most
4521   significant 8 bits of a 24 bit word are placed into the least
4522   significant 8 bits of the opcode.
4523
4524 ENUM
4525   BFD_RELOC_TIC54X_PARTLS7
4526 ENUMDOC
4527   This is a 7bit reloc for the tms320c54x, where the least
4528   significant 7 bits of a 16 bit word are placed into the least
4529   significant 7 bits of the opcode.
4530
4531 ENUM
4532   BFD_RELOC_TIC54X_PARTMS9
4533 ENUMDOC
4534   This is a 9bit DP reloc for the tms320c54x, where the most
4535   significant 9 bits of a 16 bit word are placed into the least
4536   significant 9 bits of the opcode.
4537
4538 ENUM
4539   BFD_RELOC_TIC54X_23
4540 ENUMDOC
4541   This is an extended address 23-bit reloc for the tms320c54x.
4542
4543 ENUM
4544   BFD_RELOC_TIC54X_16_OF_23
4545 ENUMDOC
4546   This is a 16-bit reloc for the tms320c54x, where the least
4547   significant 16 bits of a 23-bit extended address are placed into
4548   the opcode.
4549
4550 ENUM
4551   BFD_RELOC_TIC54X_MS7_OF_23
4552 ENUMDOC
4553   This is a reloc for the tms320c54x, where the most
4554   significant 7 bits of a 23-bit extended address are placed into
4555   the opcode.
4556
4557 ENUM
4558   BFD_RELOC_C6000_PCR_S21
4559 ENUMX
4560   BFD_RELOC_C6000_PCR_S12
4561 ENUMX
4562   BFD_RELOC_C6000_PCR_S10
4563 ENUMX
4564   BFD_RELOC_C6000_PCR_S7
4565 ENUMX
4566   BFD_RELOC_C6000_ABS_S16
4567 ENUMX
4568   BFD_RELOC_C6000_ABS_L16
4569 ENUMX
4570   BFD_RELOC_C6000_ABS_H16
4571 ENUMX
4572   BFD_RELOC_C6000_SBR_U15_B
4573 ENUMX
4574   BFD_RELOC_C6000_SBR_U15_H
4575 ENUMX
4576   BFD_RELOC_C6000_SBR_U15_W
4577 ENUMX
4578   BFD_RELOC_C6000_SBR_S16
4579 ENUMX
4580   BFD_RELOC_C6000_SBR_L16_B
4581 ENUMX
4582   BFD_RELOC_C6000_SBR_L16_H
4583 ENUMX
4584   BFD_RELOC_C6000_SBR_L16_W
4585 ENUMX
4586   BFD_RELOC_C6000_SBR_H16_B
4587 ENUMX
4588   BFD_RELOC_C6000_SBR_H16_H
4589 ENUMX
4590   BFD_RELOC_C6000_SBR_H16_W
4591 ENUMX
4592   BFD_RELOC_C6000_SBR_GOT_U15_W
4593 ENUMX
4594   BFD_RELOC_C6000_SBR_GOT_L16_W
4595 ENUMX
4596   BFD_RELOC_C6000_SBR_GOT_H16_W
4597 ENUMX
4598   BFD_RELOC_C6000_DSBT_INDEX
4599 ENUMX
4600   BFD_RELOC_C6000_PREL31
4601 ENUMX
4602   BFD_RELOC_C6000_COPY
4603 ENUMX
4604   BFD_RELOC_C6000_JUMP_SLOT
4605 ENUMX
4606   BFD_RELOC_C6000_EHTYPE
4607 ENUMX
4608   BFD_RELOC_C6000_PCR_H16
4609 ENUMX
4610   BFD_RELOC_C6000_PCR_L16
4611 ENUMX
4612   BFD_RELOC_C6000_ALIGN
4613 ENUMX
4614   BFD_RELOC_C6000_FPHEAD
4615 ENUMX
4616   BFD_RELOC_C6000_NOCMP
4617 ENUMDOC
4618   TMS320C6000 relocations.
4619
4620 ENUM
4621   BFD_RELOC_FR30_48
4622 ENUMDOC
4623   This is a 48 bit reloc for the FR30 that stores 32 bits.
4624 ENUM
4625   BFD_RELOC_FR30_20
4626 ENUMDOC
4627   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4628   two sections.
4629 ENUM
4630   BFD_RELOC_FR30_6_IN_4
4631 ENUMDOC
4632   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4633   4 bits.
4634 ENUM
4635   BFD_RELOC_FR30_8_IN_8
4636 ENUMDOC
4637   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4638   into 8 bits.
4639 ENUM
4640   BFD_RELOC_FR30_9_IN_8
4641 ENUMDOC
4642   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4643   into 8 bits.
4644 ENUM
4645   BFD_RELOC_FR30_10_IN_8
4646 ENUMDOC
4647   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4648   into 8 bits.
4649 ENUM
4650   BFD_RELOC_FR30_9_PCREL
4651 ENUMDOC
4652   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4653   short offset into 8 bits.
4654 ENUM
4655   BFD_RELOC_FR30_12_PCREL
4656 ENUMDOC
4657   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4658   short offset into 11 bits.
4659
4660 ENUM
4661   BFD_RELOC_MCORE_PCREL_IMM8BY4
4662 ENUMX
4663   BFD_RELOC_MCORE_PCREL_IMM11BY2
4664 ENUMX
4665   BFD_RELOC_MCORE_PCREL_IMM4BY2
4666 ENUMX
4667   BFD_RELOC_MCORE_PCREL_32
4668 ENUMX
4669   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4670 ENUMX
4671   BFD_RELOC_MCORE_RVA
4672 ENUMDOC
4673   Motorola Mcore relocations.
4674
4675 ENUM
4676   BFD_RELOC_MEP_8
4677 ENUMX
4678   BFD_RELOC_MEP_16
4679 ENUMX
4680   BFD_RELOC_MEP_32
4681 ENUMX
4682   BFD_RELOC_MEP_PCREL8A2
4683 ENUMX
4684   BFD_RELOC_MEP_PCREL12A2
4685 ENUMX
4686   BFD_RELOC_MEP_PCREL17A2
4687 ENUMX
4688   BFD_RELOC_MEP_PCREL24A2
4689 ENUMX
4690   BFD_RELOC_MEP_PCABS24A2
4691 ENUMX
4692   BFD_RELOC_MEP_LOW16
4693 ENUMX
4694   BFD_RELOC_MEP_HI16U
4695 ENUMX
4696   BFD_RELOC_MEP_HI16S
4697 ENUMX
4698   BFD_RELOC_MEP_GPREL
4699 ENUMX
4700   BFD_RELOC_MEP_TPREL
4701 ENUMX
4702   BFD_RELOC_MEP_TPREL7
4703 ENUMX
4704   BFD_RELOC_MEP_TPREL7A2
4705 ENUMX
4706   BFD_RELOC_MEP_TPREL7A4
4707 ENUMX
4708   BFD_RELOC_MEP_UIMM24
4709 ENUMX
4710   BFD_RELOC_MEP_ADDR24A4
4711 ENUMX
4712   BFD_RELOC_MEP_GNU_VTINHERIT
4713 ENUMX
4714   BFD_RELOC_MEP_GNU_VTENTRY
4715 ENUMDOC
4716   Toshiba Media Processor Relocations.
4717 COMMENT
4718
4719 ENUM
4720   BFD_RELOC_METAG_HIADDR16
4721 ENUMX
4722   BFD_RELOC_METAG_LOADDR16
4723 ENUMX
4724   BFD_RELOC_METAG_RELBRANCH
4725 ENUMX
4726   BFD_RELOC_METAG_GETSETOFF
4727 ENUMX
4728   BFD_RELOC_METAG_HIOG
4729 ENUMX
4730   BFD_RELOC_METAG_LOOG
4731 ENUMX
4732   BFD_RELOC_METAG_REL8
4733 ENUMX
4734   BFD_RELOC_METAG_REL16
4735 ENUMX
4736   BFD_RELOC_METAG_HI16_GOTOFF
4737 ENUMX
4738   BFD_RELOC_METAG_LO16_GOTOFF
4739 ENUMX
4740   BFD_RELOC_METAG_GETSET_GOTOFF
4741 ENUMX
4742   BFD_RELOC_METAG_GETSET_GOT
4743 ENUMX
4744   BFD_RELOC_METAG_HI16_GOTPC
4745 ENUMX
4746   BFD_RELOC_METAG_LO16_GOTPC
4747 ENUMX
4748   BFD_RELOC_METAG_HI16_PLT
4749 ENUMX
4750   BFD_RELOC_METAG_LO16_PLT
4751 ENUMX
4752   BFD_RELOC_METAG_RELBRANCH_PLT
4753 ENUMX
4754   BFD_RELOC_METAG_GOTOFF
4755 ENUMX
4756   BFD_RELOC_METAG_PLT
4757 ENUMX
4758   BFD_RELOC_METAG_COPY
4759 ENUMX
4760   BFD_RELOC_METAG_JMP_SLOT
4761 ENUMX
4762   BFD_RELOC_METAG_RELATIVE
4763 ENUMX
4764   BFD_RELOC_METAG_GLOB_DAT
4765 ENUMX
4766   BFD_RELOC_METAG_TLS_GD
4767 ENUMX
4768   BFD_RELOC_METAG_TLS_LDM
4769 ENUMX
4770   BFD_RELOC_METAG_TLS_LDO_HI16
4771 ENUMX
4772   BFD_RELOC_METAG_TLS_LDO_LO16
4773 ENUMX
4774   BFD_RELOC_METAG_TLS_LDO
4775 ENUMX
4776   BFD_RELOC_METAG_TLS_IE
4777 ENUMX
4778   BFD_RELOC_METAG_TLS_IENONPIC
4779 ENUMX
4780   BFD_RELOC_METAG_TLS_IENONPIC_HI16
4781 ENUMX
4782   BFD_RELOC_METAG_TLS_IENONPIC_LO16
4783 ENUMX
4784   BFD_RELOC_METAG_TLS_TPOFF
4785 ENUMX
4786   BFD_RELOC_METAG_TLS_DTPMOD
4787 ENUMX
4788   BFD_RELOC_METAG_TLS_DTPOFF
4789 ENUMX
4790   BFD_RELOC_METAG_TLS_LE
4791 ENUMX
4792   BFD_RELOC_METAG_TLS_LE_HI16
4793 ENUMX
4794   BFD_RELOC_METAG_TLS_LE_LO16
4795 ENUMDOC
4796   Imagination Technologies Meta relocations.
4797
4798 ENUM
4799   BFD_RELOC_MMIX_GETA
4800 ENUMX
4801   BFD_RELOC_MMIX_GETA_1
4802 ENUMX
4803   BFD_RELOC_MMIX_GETA_2
4804 ENUMX
4805   BFD_RELOC_MMIX_GETA_3
4806 ENUMDOC
4807   These are relocations for the GETA instruction.
4808 ENUM
4809   BFD_RELOC_MMIX_CBRANCH
4810 ENUMX
4811   BFD_RELOC_MMIX_CBRANCH_J
4812 ENUMX
4813   BFD_RELOC_MMIX_CBRANCH_1
4814 ENUMX
4815   BFD_RELOC_MMIX_CBRANCH_2
4816 ENUMX
4817   BFD_RELOC_MMIX_CBRANCH_3
4818 ENUMDOC
4819   These are relocations for a conditional branch instruction.
4820 ENUM
4821   BFD_RELOC_MMIX_PUSHJ
4822 ENUMX
4823   BFD_RELOC_MMIX_PUSHJ_1
4824 ENUMX
4825   BFD_RELOC_MMIX_PUSHJ_2
4826 ENUMX
4827   BFD_RELOC_MMIX_PUSHJ_3
4828 ENUMX
4829   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4830 ENUMDOC
4831   These are relocations for the PUSHJ instruction.
4832 ENUM
4833   BFD_RELOC_MMIX_JMP
4834 ENUMX
4835   BFD_RELOC_MMIX_JMP_1
4836 ENUMX
4837   BFD_RELOC_MMIX_JMP_2
4838 ENUMX
4839   BFD_RELOC_MMIX_JMP_3
4840 ENUMDOC
4841   These are relocations for the JMP instruction.
4842 ENUM
4843   BFD_RELOC_MMIX_ADDR19
4844 ENUMDOC
4845   This is a relocation for a relative address as in a GETA instruction or
4846   a branch.
4847 ENUM
4848   BFD_RELOC_MMIX_ADDR27
4849 ENUMDOC
4850   This is a relocation for a relative address as in a JMP instruction.
4851 ENUM
4852   BFD_RELOC_MMIX_REG_OR_BYTE
4853 ENUMDOC
4854   This is a relocation for an instruction field that may be a general
4855   register or a value 0..255.
4856 ENUM
4857   BFD_RELOC_MMIX_REG
4858 ENUMDOC
4859   This is a relocation for an instruction field that may be a general
4860   register.
4861 ENUM
4862   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4863 ENUMDOC
4864   This is a relocation for two instruction fields holding a register and
4865   an offset, the equivalent of the relocation.
4866 ENUM
4867   BFD_RELOC_MMIX_LOCAL
4868 ENUMDOC
4869   This relocation is an assertion that the expression is not allocated as
4870   a global register.  It does not modify contents.
4871
4872 ENUM
4873   BFD_RELOC_AVR_7_PCREL
4874 ENUMDOC
4875   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4876   short offset into 7 bits.
4877 ENUM
4878   BFD_RELOC_AVR_13_PCREL
4879 ENUMDOC
4880   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4881   short offset into 12 bits.
4882 ENUM
4883   BFD_RELOC_AVR_16_PM
4884 ENUMDOC
4885   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4886   program memory address) into 16 bits.
4887 ENUM
4888   BFD_RELOC_AVR_LO8_LDI
4889 ENUMDOC
4890   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4891   data memory address) into 8 bit immediate value of LDI insn.
4892 ENUM
4893   BFD_RELOC_AVR_HI8_LDI
4894 ENUMDOC
4895   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4896   of data memory address) into 8 bit immediate value of LDI insn.
4897 ENUM
4898   BFD_RELOC_AVR_HH8_LDI
4899 ENUMDOC
4900   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4901   of program memory address) into 8 bit immediate value of LDI insn.
4902 ENUM
4903   BFD_RELOC_AVR_MS8_LDI
4904 ENUMDOC
4905   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4906   of 32 bit value) into 8 bit immediate value of LDI insn.
4907 ENUM
4908   BFD_RELOC_AVR_LO8_LDI_NEG
4909 ENUMDOC
4910   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4911   (usually data memory address) into 8 bit immediate value of SUBI insn.
4912 ENUM
4913   BFD_RELOC_AVR_HI8_LDI_NEG
4914 ENUMDOC
4915   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4916   (high 8 bit of data memory address) into 8 bit immediate value of
4917   SUBI insn.
4918 ENUM
4919   BFD_RELOC_AVR_HH8_LDI_NEG
4920 ENUMDOC
4921   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4922   (most high 8 bit of program memory address) into 8 bit immediate value
4923   of LDI or SUBI insn.
4924 ENUM
4925   BFD_RELOC_AVR_MS8_LDI_NEG
4926 ENUMDOC
4927   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4928   of 32 bit value) into 8 bit immediate value of LDI insn.
4929 ENUM
4930   BFD_RELOC_AVR_LO8_LDI_PM
4931 ENUMDOC
4932   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4933   command address) into 8 bit immediate value of LDI insn.
4934 ENUM
4935   BFD_RELOC_AVR_LO8_LDI_GS
4936 ENUMDOC
4937   This is a 16 bit reloc for the AVR that stores 8 bit value
4938   (command address) into 8 bit immediate value of LDI insn. If the address
4939   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4940   in the lower 128k.
4941 ENUM
4942   BFD_RELOC_AVR_HI8_LDI_PM
4943 ENUMDOC
4944   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4945   of command address) into 8 bit immediate value of LDI insn.
4946 ENUM
4947   BFD_RELOC_AVR_HI8_LDI_GS
4948 ENUMDOC
4949   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4950   of command address) into 8 bit immediate value of LDI insn.  If the address
4951   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4952   below 128k.
4953 ENUM
4954   BFD_RELOC_AVR_HH8_LDI_PM
4955 ENUMDOC
4956   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4957   of command address) into 8 bit immediate value of LDI insn.
4958 ENUM
4959   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4960 ENUMDOC
4961   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4962   (usually command address) into 8 bit immediate value of SUBI insn.
4963 ENUM
4964   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4965 ENUMDOC
4966   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4967   (high 8 bit of 16 bit command address) into 8 bit immediate value
4968   of SUBI insn.
4969 ENUM
4970   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4971 ENUMDOC
4972   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4973   (high 6 bit of 22 bit command address) into 8 bit immediate
4974   value of SUBI insn.
4975 ENUM
4976   BFD_RELOC_AVR_CALL
4977 ENUMDOC
4978   This is a 32 bit reloc for the AVR that stores 23 bit value
4979   into 22 bits.
4980 ENUM
4981   BFD_RELOC_AVR_LDI
4982 ENUMDOC
4983   This is a 16 bit reloc for the AVR that stores all needed bits
4984   for absolute addressing with ldi with overflow check to linktime
4985 ENUM
4986   BFD_RELOC_AVR_6
4987 ENUMDOC
4988   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4989   instructions
4990 ENUM
4991   BFD_RELOC_AVR_6_ADIW
4992 ENUMDOC
4993   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4994   instructions
4995 ENUM
4996   BFD_RELOC_AVR_8_LO
4997 ENUMDOC
4998   This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
4999   in .byte lo8(symbol)
5000 ENUM
5001   BFD_RELOC_AVR_8_HI
5002 ENUMDOC
5003   This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
5004   in .byte hi8(symbol)
5005 ENUM
5006   BFD_RELOC_AVR_8_HLO
5007 ENUMDOC
5008   This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
5009   in .byte hlo8(symbol)
5010 ENUM
5011   BFD_RELOC_AVR_DIFF8
5012 ENUMX
5013   BFD_RELOC_AVR_DIFF16
5014 ENUMX
5015   BFD_RELOC_AVR_DIFF32
5016 ENUMDOC
5017   AVR relocations to mark the difference of two local symbols.
5018   These are only needed to support linker relaxation and can be ignored
5019   when not relaxing.  The field is set to the value of the difference
5020   assuming no relaxation.  The relocation encodes the position of the
5021   second symbol so the linker can determine whether to adjust the field
5022   value.
5023 ENUM
5024   BFD_RELOC_AVR_LDS_STS_16
5025 ENUMDOC
5026   This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
5027   lds and sts instructions supported only tiny core.
5028 ENUM
5029   BFD_RELOC_AVR_PORT6
5030 ENUMDOC
5031   This is a 6 bit reloc for the AVR that stores an I/O register
5032   number for the IN and OUT instructions
5033 ENUM
5034   BFD_RELOC_AVR_PORT5
5035 ENUMDOC
5036   This is a 5 bit reloc for the AVR that stores an I/O register
5037   number for the SBIC, SBIS, SBI and CBI instructions
5038 ENUM
5039   BFD_RELOC_RL78_NEG8
5040 ENUMX
5041   BFD_RELOC_RL78_NEG16
5042 ENUMX
5043   BFD_RELOC_RL78_NEG24
5044 ENUMX
5045   BFD_RELOC_RL78_NEG32
5046 ENUMX
5047   BFD_RELOC_RL78_16_OP
5048 ENUMX
5049   BFD_RELOC_RL78_24_OP
5050 ENUMX
5051   BFD_RELOC_RL78_32_OP
5052 ENUMX
5053   BFD_RELOC_RL78_8U
5054 ENUMX
5055   BFD_RELOC_RL78_16U
5056 ENUMX
5057   BFD_RELOC_RL78_24U
5058 ENUMX
5059   BFD_RELOC_RL78_DIR3U_PCREL
5060 ENUMX
5061   BFD_RELOC_RL78_DIFF
5062 ENUMX
5063   BFD_RELOC_RL78_GPRELB
5064 ENUMX
5065   BFD_RELOC_RL78_GPRELW
5066 ENUMX
5067   BFD_RELOC_RL78_GPRELL
5068 ENUMX
5069   BFD_RELOC_RL78_SYM
5070 ENUMX
5071   BFD_RELOC_RL78_OP_SUBTRACT
5072 ENUMX
5073   BFD_RELOC_RL78_OP_NEG
5074 ENUMX
5075   BFD_RELOC_RL78_OP_AND
5076 ENUMX
5077   BFD_RELOC_RL78_OP_SHRA
5078 ENUMX
5079   BFD_RELOC_RL78_ABS8
5080 ENUMX
5081   BFD_RELOC_RL78_ABS16
5082 ENUMX
5083   BFD_RELOC_RL78_ABS16_REV
5084 ENUMX
5085   BFD_RELOC_RL78_ABS32
5086 ENUMX
5087   BFD_RELOC_RL78_ABS32_REV
5088 ENUMX
5089   BFD_RELOC_RL78_ABS16U
5090 ENUMX
5091   BFD_RELOC_RL78_ABS16UW
5092 ENUMX
5093   BFD_RELOC_RL78_ABS16UL
5094 ENUMX
5095   BFD_RELOC_RL78_RELAX
5096 ENUMX
5097   BFD_RELOC_RL78_HI16
5098 ENUMX
5099   BFD_RELOC_RL78_HI8
5100 ENUMX
5101   BFD_RELOC_RL78_LO16
5102 ENUMX
5103   BFD_RELOC_RL78_CODE
5104 ENUMX
5105   BFD_RELOC_RL78_SADDR
5106 ENUMDOC
5107   Renesas RL78 Relocations.
5108
5109 ENUM
5110   BFD_RELOC_RX_NEG8
5111 ENUMX
5112   BFD_RELOC_RX_NEG16
5113 ENUMX
5114   BFD_RELOC_RX_NEG24
5115 ENUMX
5116   BFD_RELOC_RX_NEG32
5117 ENUMX
5118   BFD_RELOC_RX_16_OP
5119 ENUMX
5120   BFD_RELOC_RX_24_OP
5121 ENUMX
5122   BFD_RELOC_RX_32_OP
5123 ENUMX
5124   BFD_RELOC_RX_8U
5125 ENUMX
5126   BFD_RELOC_RX_16U
5127 ENUMX
5128   BFD_RELOC_RX_24U
5129 ENUMX
5130   BFD_RELOC_RX_DIR3U_PCREL
5131 ENUMX
5132   BFD_RELOC_RX_DIFF
5133 ENUMX
5134   BFD_RELOC_RX_GPRELB
5135 ENUMX
5136   BFD_RELOC_RX_GPRELW
5137 ENUMX
5138   BFD_RELOC_RX_GPRELL
5139 ENUMX
5140   BFD_RELOC_RX_SYM
5141 ENUMX
5142   BFD_RELOC_RX_OP_SUBTRACT
5143 ENUMX
5144   BFD_RELOC_RX_OP_NEG
5145 ENUMX
5146   BFD_RELOC_RX_ABS8
5147 ENUMX
5148   BFD_RELOC_RX_ABS16
5149 ENUMX
5150   BFD_RELOC_RX_ABS16_REV
5151 ENUMX
5152   BFD_RELOC_RX_ABS32
5153 ENUMX
5154   BFD_RELOC_RX_ABS32_REV
5155 ENUMX
5156   BFD_RELOC_RX_ABS16U
5157 ENUMX
5158   BFD_RELOC_RX_ABS16UW
5159 ENUMX
5160   BFD_RELOC_RX_ABS16UL
5161 ENUMX
5162   BFD_RELOC_RX_RELAX
5163 ENUMDOC
5164   Renesas RX Relocations.
5165
5166 ENUM
5167   BFD_RELOC_390_12
5168 ENUMDOC
5169    Direct 12 bit.
5170 ENUM
5171   BFD_RELOC_390_GOT12
5172 ENUMDOC
5173   12 bit GOT offset.
5174 ENUM
5175   BFD_RELOC_390_PLT32
5176 ENUMDOC
5177   32 bit PC relative PLT address.
5178 ENUM
5179   BFD_RELOC_390_COPY
5180 ENUMDOC
5181   Copy symbol at runtime.
5182 ENUM
5183   BFD_RELOC_390_GLOB_DAT
5184 ENUMDOC
5185   Create GOT entry.
5186 ENUM
5187   BFD_RELOC_390_JMP_SLOT
5188 ENUMDOC
5189   Create PLT entry.
5190 ENUM
5191   BFD_RELOC_390_RELATIVE
5192 ENUMDOC
5193   Adjust by program base.
5194 ENUM
5195   BFD_RELOC_390_GOTPC
5196 ENUMDOC
5197   32 bit PC relative offset to GOT.
5198 ENUM
5199   BFD_RELOC_390_GOT16
5200 ENUMDOC
5201   16 bit GOT offset.
5202 ENUM
5203   BFD_RELOC_390_PC12DBL
5204 ENUMDOC
5205   PC relative 12 bit shifted by 1.
5206 ENUM
5207   BFD_RELOC_390_PLT12DBL
5208 ENUMDOC
5209   12 bit PC rel. PLT shifted by 1.
5210 ENUM
5211   BFD_RELOC_390_PC16DBL
5212 ENUMDOC
5213   PC relative 16 bit shifted by 1.
5214 ENUM
5215   BFD_RELOC_390_PLT16DBL
5216 ENUMDOC
5217   16 bit PC rel. PLT shifted by 1.
5218 ENUM
5219   BFD_RELOC_390_PC24DBL
5220 ENUMDOC
5221   PC relative 24 bit shifted by 1.
5222 ENUM
5223   BFD_RELOC_390_PLT24DBL
5224 ENUMDOC
5225   24 bit PC rel. PLT shifted by 1.
5226 ENUM
5227   BFD_RELOC_390_PC32DBL
5228 ENUMDOC
5229   PC relative 32 bit shifted by 1.
5230 ENUM
5231   BFD_RELOC_390_PLT32DBL
5232 ENUMDOC
5233   32 bit PC rel. PLT shifted by 1.
5234 ENUM
5235   BFD_RELOC_390_GOTPCDBL
5236 ENUMDOC
5237   32 bit PC rel. GOT shifted by 1.
5238 ENUM
5239   BFD_RELOC_390_GOT64
5240 ENUMDOC
5241   64 bit GOT offset.
5242 ENUM
5243   BFD_RELOC_390_PLT64
5244 ENUMDOC
5245   64 bit PC relative PLT address.
5246 ENUM
5247   BFD_RELOC_390_GOTENT
5248 ENUMDOC
5249   32 bit rel. offset to GOT entry.
5250 ENUM
5251   BFD_RELOC_390_GOTOFF64
5252 ENUMDOC
5253   64 bit offset to GOT.
5254 ENUM
5255   BFD_RELOC_390_GOTPLT12
5256 ENUMDOC
5257   12-bit offset to symbol-entry within GOT, with PLT handling.
5258 ENUM
5259   BFD_RELOC_390_GOTPLT16
5260 ENUMDOC
5261   16-bit offset to symbol-entry within GOT, with PLT handling.
5262 ENUM
5263   BFD_RELOC_390_GOTPLT32
5264 ENUMDOC
5265   32-bit offset to symbol-entry within GOT, with PLT handling.
5266 ENUM
5267   BFD_RELOC_390_GOTPLT64
5268 ENUMDOC
5269   64-bit offset to symbol-entry within GOT, with PLT handling.
5270 ENUM
5271   BFD_RELOC_390_GOTPLTENT
5272 ENUMDOC
5273   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5274 ENUM
5275   BFD_RELOC_390_PLTOFF16
5276 ENUMDOC
5277   16-bit rel. offset from the GOT to a PLT entry.
5278 ENUM
5279   BFD_RELOC_390_PLTOFF32
5280 ENUMDOC
5281   32-bit rel. offset from the GOT to a PLT entry.
5282 ENUM
5283   BFD_RELOC_390_PLTOFF64
5284 ENUMDOC
5285   64-bit rel. offset from the GOT to a PLT entry.
5286
5287 ENUM
5288   BFD_RELOC_390_TLS_LOAD
5289 ENUMX
5290   BFD_RELOC_390_TLS_GDCALL
5291 ENUMX
5292   BFD_RELOC_390_TLS_LDCALL
5293 ENUMX
5294   BFD_RELOC_390_TLS_GD32
5295 ENUMX
5296   BFD_RELOC_390_TLS_GD64
5297 ENUMX
5298   BFD_RELOC_390_TLS_GOTIE12
5299 ENUMX
5300   BFD_RELOC_390_TLS_GOTIE32
5301 ENUMX
5302   BFD_RELOC_390_TLS_GOTIE64
5303 ENUMX
5304   BFD_RELOC_390_TLS_LDM32
5305 ENUMX
5306   BFD_RELOC_390_TLS_LDM64
5307 ENUMX
5308   BFD_RELOC_390_TLS_IE32
5309 ENUMX
5310   BFD_RELOC_390_TLS_IE64
5311 ENUMX
5312   BFD_RELOC_390_TLS_IEENT
5313 ENUMX
5314   BFD_RELOC_390_TLS_LE32
5315 ENUMX
5316   BFD_RELOC_390_TLS_LE64
5317 ENUMX
5318   BFD_RELOC_390_TLS_LDO32
5319 ENUMX
5320   BFD_RELOC_390_TLS_LDO64
5321 ENUMX
5322   BFD_RELOC_390_TLS_DTPMOD
5323 ENUMX
5324   BFD_RELOC_390_TLS_DTPOFF
5325 ENUMX
5326   BFD_RELOC_390_TLS_TPOFF
5327 ENUMDOC
5328   s390 tls relocations.
5329
5330 ENUM
5331   BFD_RELOC_390_20
5332 ENUMX
5333   BFD_RELOC_390_GOT20
5334 ENUMX
5335   BFD_RELOC_390_GOTPLT20
5336 ENUMX
5337   BFD_RELOC_390_TLS_GOTIE20
5338 ENUMDOC
5339   Long displacement extension.
5340
5341 ENUM
5342   BFD_RELOC_390_IRELATIVE
5343 ENUMDOC
5344   STT_GNU_IFUNC relocation.
5345
5346 ENUM
5347   BFD_RELOC_SCORE_GPREL15
5348 ENUMDOC
5349   Score relocations
5350   Low 16 bit for load/store
5351 ENUM
5352   BFD_RELOC_SCORE_DUMMY2
5353 ENUMX
5354   BFD_RELOC_SCORE_JMP
5355 ENUMDOC
5356   This is a 24-bit reloc with the right 1 bit assumed to be 0
5357 ENUM
5358   BFD_RELOC_SCORE_BRANCH
5359 ENUMDOC
5360   This is a 19-bit reloc with the right 1 bit assumed to be 0
5361 ENUM
5362   BFD_RELOC_SCORE_IMM30
5363 ENUMDOC
5364   This is a 32-bit reloc for 48-bit instructions.
5365 ENUM
5366   BFD_RELOC_SCORE_IMM32
5367 ENUMDOC
5368   This is a 32-bit reloc for 48-bit instructions.
5369 ENUM
5370   BFD_RELOC_SCORE16_JMP
5371 ENUMDOC
5372   This is a 11-bit reloc with the right 1 bit assumed to be 0
5373 ENUM
5374   BFD_RELOC_SCORE16_BRANCH
5375 ENUMDOC
5376   This is a 8-bit reloc with the right 1 bit assumed to be 0
5377 ENUM
5378   BFD_RELOC_SCORE_BCMP
5379 ENUMDOC
5380    This is a 9-bit reloc with the right 1 bit assumed to be 0
5381 ENUM
5382   BFD_RELOC_SCORE_GOT15
5383 ENUMX
5384   BFD_RELOC_SCORE_GOT_LO16
5385 ENUMX
5386   BFD_RELOC_SCORE_CALL15
5387 ENUMX
5388   BFD_RELOC_SCORE_DUMMY_HI16
5389 ENUMDOC
5390   Undocumented Score relocs
5391
5392 ENUM
5393   BFD_RELOC_IP2K_FR9
5394 ENUMDOC
5395   Scenix IP2K - 9-bit register number / data address
5396 ENUM
5397   BFD_RELOC_IP2K_BANK
5398 ENUMDOC
5399   Scenix IP2K - 4-bit register/data bank number
5400 ENUM
5401   BFD_RELOC_IP2K_ADDR16CJP
5402 ENUMDOC
5403   Scenix IP2K - low 13 bits of instruction word address
5404 ENUM
5405   BFD_RELOC_IP2K_PAGE3
5406 ENUMDOC
5407   Scenix IP2K - high 3 bits of instruction word address
5408 ENUM
5409   BFD_RELOC_IP2K_LO8DATA
5410 ENUMX
5411   BFD_RELOC_IP2K_HI8DATA
5412 ENUMX
5413   BFD_RELOC_IP2K_EX8DATA
5414 ENUMDOC
5415   Scenix IP2K - ext/low/high 8 bits of data address
5416 ENUM
5417   BFD_RELOC_IP2K_LO8INSN
5418 ENUMX
5419   BFD_RELOC_IP2K_HI8INSN
5420 ENUMDOC
5421   Scenix IP2K - low/high 8 bits of instruction word address
5422 ENUM
5423   BFD_RELOC_IP2K_PC_SKIP
5424 ENUMDOC
5425   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5426 ENUM
5427   BFD_RELOC_IP2K_TEXT
5428 ENUMDOC
5429   Scenix IP2K - 16 bit word address in text section.
5430 ENUM
5431   BFD_RELOC_IP2K_FR_OFFSET
5432 ENUMDOC
5433   Scenix IP2K - 7-bit sp or dp offset
5434 ENUM
5435   BFD_RELOC_VPE4KMATH_DATA
5436 ENUMX
5437   BFD_RELOC_VPE4KMATH_INSN
5438 ENUMDOC
5439   Scenix VPE4K coprocessor - data/insn-space addressing
5440
5441 ENUM
5442   BFD_RELOC_VTABLE_INHERIT
5443 ENUMX
5444   BFD_RELOC_VTABLE_ENTRY
5445 ENUMDOC
5446   These two relocations are used by the linker to determine which of
5447   the entries in a C++ virtual function table are actually used.  When
5448   the --gc-sections option is given, the linker will zero out the entries
5449   that are not used, so that the code for those functions need not be
5450   included in the output.
5451
5452   VTABLE_INHERIT is a zero-space relocation used to describe to the
5453   linker the inheritance tree of a C++ virtual function table.  The
5454   relocation's symbol should be the parent class' vtable, and the
5455   relocation should be located at the child vtable.
5456
5457   VTABLE_ENTRY is a zero-space relocation that describes the use of a
5458   virtual function table entry.  The reloc's symbol should refer to the
5459   table of the class mentioned in the code.  Off of that base, an offset
5460   describes the entry that is being used.  For Rela hosts, this offset
5461   is stored in the reloc's addend.  For Rel hosts, we are forced to put
5462   this offset in the reloc's section offset.
5463
5464 ENUM
5465   BFD_RELOC_IA64_IMM14
5466 ENUMX
5467   BFD_RELOC_IA64_IMM22
5468 ENUMX
5469   BFD_RELOC_IA64_IMM64
5470 ENUMX
5471   BFD_RELOC_IA64_DIR32MSB
5472 ENUMX
5473   BFD_RELOC_IA64_DIR32LSB
5474 ENUMX
5475   BFD_RELOC_IA64_DIR64MSB
5476 ENUMX
5477   BFD_RELOC_IA64_DIR64LSB
5478 ENUMX
5479   BFD_RELOC_IA64_GPREL22
5480 ENUMX
5481   BFD_RELOC_IA64_GPREL64I
5482 ENUMX
5483   BFD_RELOC_IA64_GPREL32MSB
5484 ENUMX
5485   BFD_RELOC_IA64_GPREL32LSB
5486 ENUMX
5487   BFD_RELOC_IA64_GPREL64MSB
5488 ENUMX
5489   BFD_RELOC_IA64_GPREL64LSB
5490 ENUMX
5491   BFD_RELOC_IA64_LTOFF22
5492 ENUMX
5493   BFD_RELOC_IA64_LTOFF64I
5494 ENUMX
5495   BFD_RELOC_IA64_PLTOFF22
5496 ENUMX
5497   BFD_RELOC_IA64_PLTOFF64I
5498 ENUMX
5499   BFD_RELOC_IA64_PLTOFF64MSB
5500 ENUMX
5501   BFD_RELOC_IA64_PLTOFF64LSB
5502 ENUMX
5503   BFD_RELOC_IA64_FPTR64I
5504 ENUMX
5505   BFD_RELOC_IA64_FPTR32MSB
5506 ENUMX
5507   BFD_RELOC_IA64_FPTR32LSB
5508 ENUMX
5509   BFD_RELOC_IA64_FPTR64MSB
5510 ENUMX
5511   BFD_RELOC_IA64_FPTR64LSB
5512 ENUMX
5513   BFD_RELOC_IA64_PCREL21B
5514 ENUMX
5515   BFD_RELOC_IA64_PCREL21BI
5516 ENUMX
5517   BFD_RELOC_IA64_PCREL21M
5518 ENUMX
5519   BFD_RELOC_IA64_PCREL21F
5520 ENUMX
5521   BFD_RELOC_IA64_PCREL22
5522 ENUMX
5523   BFD_RELOC_IA64_PCREL60B
5524 ENUMX
5525   BFD_RELOC_IA64_PCREL64I
5526 ENUMX
5527   BFD_RELOC_IA64_PCREL32MSB
5528 ENUMX
5529   BFD_RELOC_IA64_PCREL32LSB
5530 ENUMX
5531   BFD_RELOC_IA64_PCREL64MSB
5532 ENUMX
5533   BFD_RELOC_IA64_PCREL64LSB
5534 ENUMX
5535   BFD_RELOC_IA64_LTOFF_FPTR22
5536 ENUMX
5537   BFD_RELOC_IA64_LTOFF_FPTR64I
5538 ENUMX
5539   BFD_RELOC_IA64_LTOFF_FPTR32MSB
5540 ENUMX
5541   BFD_RELOC_IA64_LTOFF_FPTR32LSB
5542 ENUMX
5543   BFD_RELOC_IA64_LTOFF_FPTR64MSB
5544 ENUMX
5545   BFD_RELOC_IA64_LTOFF_FPTR64LSB
5546 ENUMX
5547   BFD_RELOC_IA64_SEGREL32MSB
5548 ENUMX
5549   BFD_RELOC_IA64_SEGREL32LSB
5550 ENUMX
5551   BFD_RELOC_IA64_SEGREL64MSB
5552 ENUMX
5553   BFD_RELOC_IA64_SEGREL64LSB
5554 ENUMX
5555   BFD_RELOC_IA64_SECREL32MSB
5556 ENUMX
5557   BFD_RELOC_IA64_SECREL32LSB
5558 ENUMX
5559   BFD_RELOC_IA64_SECREL64MSB
5560 ENUMX
5561   BFD_RELOC_IA64_SECREL64LSB
5562 ENUMX
5563   BFD_RELOC_IA64_REL32MSB
5564 ENUMX
5565   BFD_RELOC_IA64_REL32LSB
5566 ENUMX
5567   BFD_RELOC_IA64_REL64MSB
5568 ENUMX
5569   BFD_RELOC_IA64_REL64LSB
5570 ENUMX
5571   BFD_RELOC_IA64_LTV32MSB
5572 ENUMX
5573   BFD_RELOC_IA64_LTV32LSB
5574 ENUMX
5575   BFD_RELOC_IA64_LTV64MSB
5576 ENUMX
5577   BFD_RELOC_IA64_LTV64LSB
5578 ENUMX
5579   BFD_RELOC_IA64_IPLTMSB
5580 ENUMX
5581   BFD_RELOC_IA64_IPLTLSB
5582 ENUMX
5583   BFD_RELOC_IA64_COPY
5584 ENUMX
5585   BFD_RELOC_IA64_LTOFF22X
5586 ENUMX
5587   BFD_RELOC_IA64_LDXMOV
5588 ENUMX
5589   BFD_RELOC_IA64_TPREL14
5590 ENUMX
5591   BFD_RELOC_IA64_TPREL22
5592 ENUMX
5593   BFD_RELOC_IA64_TPREL64I
5594 ENUMX
5595   BFD_RELOC_IA64_TPREL64MSB
5596 ENUMX
5597   BFD_RELOC_IA64_TPREL64LSB
5598 ENUMX
5599   BFD_RELOC_IA64_LTOFF_TPREL22
5600 ENUMX
5601   BFD_RELOC_IA64_DTPMOD64MSB
5602 ENUMX
5603   BFD_RELOC_IA64_DTPMOD64LSB
5604 ENUMX
5605   BFD_RELOC_IA64_LTOFF_DTPMOD22
5606 ENUMX
5607   BFD_RELOC_IA64_DTPREL14
5608 ENUMX
5609   BFD_RELOC_IA64_DTPREL22
5610 ENUMX
5611   BFD_RELOC_IA64_DTPREL64I
5612 ENUMX
5613   BFD_RELOC_IA64_DTPREL32MSB
5614 ENUMX
5615   BFD_RELOC_IA64_DTPREL32LSB
5616 ENUMX
5617   BFD_RELOC_IA64_DTPREL64MSB
5618 ENUMX
5619   BFD_RELOC_IA64_DTPREL64LSB
5620 ENUMX
5621   BFD_RELOC_IA64_LTOFF_DTPREL22
5622 ENUMDOC
5623   Intel IA64 Relocations.
5624
5625 ENUM
5626   BFD_RELOC_M68HC11_HI8
5627 ENUMDOC
5628   Motorola 68HC11 reloc.
5629   This is the 8 bit high part of an absolute address.
5630 ENUM
5631   BFD_RELOC_M68HC11_LO8
5632 ENUMDOC
5633   Motorola 68HC11 reloc.
5634   This is the 8 bit low part of an absolute address.
5635 ENUM
5636   BFD_RELOC_M68HC11_3B
5637 ENUMDOC
5638   Motorola 68HC11 reloc.
5639   This is the 3 bit of a value.
5640 ENUM
5641   BFD_RELOC_M68HC11_RL_JUMP
5642 ENUMDOC
5643   Motorola 68HC11 reloc.
5644   This reloc marks the beginning of a jump/call instruction.
5645   It is used for linker relaxation to correctly identify beginning
5646   of instruction and change some branches to use PC-relative
5647   addressing mode.
5648 ENUM
5649   BFD_RELOC_M68HC11_RL_GROUP
5650 ENUMDOC
5651   Motorola 68HC11 reloc.
5652   This reloc marks a group of several instructions that gcc generates
5653   and for which the linker relaxation pass can modify and/or remove
5654   some of them.
5655 ENUM
5656   BFD_RELOC_M68HC11_LO16
5657 ENUMDOC
5658   Motorola 68HC11 reloc.
5659   This is the 16-bit lower part of an address.  It is used for 'call'
5660   instruction to specify the symbol address without any special
5661   transformation (due to memory bank window).
5662 ENUM
5663   BFD_RELOC_M68HC11_PAGE
5664 ENUMDOC
5665   Motorola 68HC11 reloc.
5666   This is a 8-bit reloc that specifies the page number of an address.
5667   It is used by 'call' instruction to specify the page number of
5668   the symbol.
5669 ENUM
5670   BFD_RELOC_M68HC11_24
5671 ENUMDOC
5672   Motorola 68HC11 reloc.
5673   This is a 24-bit reloc that represents the address with a 16-bit
5674   value and a 8-bit page number.  The symbol address is transformed
5675   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5676 ENUM
5677   BFD_RELOC_M68HC12_5B
5678 ENUMDOC
5679   Motorola 68HC12 reloc.
5680   This is the 5 bits of a value.
5681 ENUM
5682   BFD_RELOC_XGATE_RL_JUMP
5683 ENUMDOC
5684   Freescale XGATE reloc.
5685   This reloc marks the beginning of a bra/jal instruction.
5686 ENUM
5687   BFD_RELOC_XGATE_RL_GROUP
5688 ENUMDOC
5689   Freescale XGATE reloc.
5690   This reloc marks a group of several instructions that gcc generates
5691   and for which the linker relaxation pass can modify and/or remove
5692   some of them.
5693 ENUM
5694   BFD_RELOC_XGATE_LO16
5695 ENUMDOC
5696   Freescale XGATE reloc.
5697   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5698   instructions.
5699 ENUM
5700   BFD_RELOC_XGATE_GPAGE
5701 ENUMDOC
5702   Freescale XGATE reloc.
5703 ENUM
5704   BFD_RELOC_XGATE_24
5705 ENUMDOC
5706   Freescale XGATE reloc.
5707 ENUM
5708   BFD_RELOC_XGATE_PCREL_9
5709 ENUMDOC
5710   Freescale XGATE reloc.
5711   This is a 9-bit pc-relative reloc.
5712 ENUM
5713   BFD_RELOC_XGATE_PCREL_10
5714 ENUMDOC
5715   Freescale XGATE reloc.
5716   This is a 10-bit pc-relative reloc.
5717 ENUM
5718   BFD_RELOC_XGATE_IMM8_LO
5719 ENUMDOC
5720   Freescale XGATE reloc.
5721   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5722   instructions.
5723 ENUM
5724   BFD_RELOC_XGATE_IMM8_HI
5725 ENUMDOC
5726   Freescale XGATE reloc.
5727   This is the 16-bit higher part of an address.  It is used for the '16-bit'
5728   instructions.
5729 ENUM
5730   BFD_RELOC_XGATE_IMM3
5731 ENUMDOC
5732   Freescale XGATE reloc.
5733   This is a 3-bit pc-relative reloc.
5734 ENUM
5735   BFD_RELOC_XGATE_IMM4
5736 ENUMDOC
5737   Freescale XGATE reloc.
5738   This is a 4-bit pc-relative reloc.
5739 ENUM
5740   BFD_RELOC_XGATE_IMM5
5741 ENUMDOC
5742   Freescale XGATE reloc.
5743   This is a 5-bit pc-relative reloc.
5744 ENUM
5745   BFD_RELOC_M68HC12_9B
5746 ENUMDOC
5747   Motorola 68HC12 reloc.
5748   This is the 9 bits of a value.
5749 ENUM
5750   BFD_RELOC_M68HC12_16B
5751 ENUMDOC
5752   Motorola 68HC12 reloc.
5753   This is the 16 bits of a value.
5754 ENUM
5755   BFD_RELOC_M68HC12_9_PCREL
5756 ENUMDOC
5757   Motorola 68HC12/XGATE reloc.
5758   This is a PCREL9 branch.
5759 ENUM
5760   BFD_RELOC_M68HC12_10_PCREL
5761 ENUMDOC
5762   Motorola 68HC12/XGATE reloc.
5763   This is a PCREL10 branch.
5764 ENUM
5765   BFD_RELOC_M68HC12_LO8XG
5766 ENUMDOC
5767   Motorola 68HC12/XGATE reloc.
5768   This is the 8 bit low part of an absolute address and immediately precedes
5769   a matching HI8XG part.
5770 ENUM
5771   BFD_RELOC_M68HC12_HI8XG
5772 ENUMDOC
5773   Motorola 68HC12/XGATE reloc.
5774   This is the 8 bit high part of an absolute address and immediately follows
5775   a matching LO8XG part.
5776 ENUM
5777   BFD_RELOC_16C_NUM08
5778 ENUMX
5779   BFD_RELOC_16C_NUM08_C
5780 ENUMX
5781   BFD_RELOC_16C_NUM16
5782 ENUMX
5783   BFD_RELOC_16C_NUM16_C
5784 ENUMX
5785   BFD_RELOC_16C_NUM32
5786 ENUMX
5787   BFD_RELOC_16C_NUM32_C
5788 ENUMX
5789   BFD_RELOC_16C_DISP04
5790 ENUMX
5791   BFD_RELOC_16C_DISP04_C
5792 ENUMX
5793   BFD_RELOC_16C_DISP08
5794 ENUMX
5795   BFD_RELOC_16C_DISP08_C
5796 ENUMX
5797   BFD_RELOC_16C_DISP16
5798 ENUMX
5799   BFD_RELOC_16C_DISP16_C
5800 ENUMX
5801   BFD_RELOC_16C_DISP24
5802 ENUMX
5803   BFD_RELOC_16C_DISP24_C
5804 ENUMX
5805   BFD_RELOC_16C_DISP24a
5806 ENUMX
5807   BFD_RELOC_16C_DISP24a_C
5808 ENUMX
5809   BFD_RELOC_16C_REG04
5810 ENUMX
5811   BFD_RELOC_16C_REG04_C
5812 ENUMX
5813   BFD_RELOC_16C_REG04a
5814 ENUMX
5815   BFD_RELOC_16C_REG04a_C
5816 ENUMX
5817   BFD_RELOC_16C_REG14
5818 ENUMX
5819   BFD_RELOC_16C_REG14_C
5820 ENUMX
5821   BFD_RELOC_16C_REG16
5822 ENUMX
5823   BFD_RELOC_16C_REG16_C
5824 ENUMX
5825   BFD_RELOC_16C_REG20
5826 ENUMX
5827   BFD_RELOC_16C_REG20_C
5828 ENUMX
5829   BFD_RELOC_16C_ABS20
5830 ENUMX
5831   BFD_RELOC_16C_ABS20_C
5832 ENUMX
5833   BFD_RELOC_16C_ABS24
5834 ENUMX
5835   BFD_RELOC_16C_ABS24_C
5836 ENUMX
5837   BFD_RELOC_16C_IMM04
5838 ENUMX
5839   BFD_RELOC_16C_IMM04_C
5840 ENUMX
5841   BFD_RELOC_16C_IMM16
5842 ENUMX
5843   BFD_RELOC_16C_IMM16_C
5844 ENUMX
5845   BFD_RELOC_16C_IMM20
5846 ENUMX
5847   BFD_RELOC_16C_IMM20_C
5848 ENUMX
5849   BFD_RELOC_16C_IMM24
5850 ENUMX
5851   BFD_RELOC_16C_IMM24_C
5852 ENUMX
5853   BFD_RELOC_16C_IMM32
5854 ENUMX
5855   BFD_RELOC_16C_IMM32_C
5856 ENUMDOC
5857   NS CR16C Relocations.
5858
5859 ENUM
5860   BFD_RELOC_CR16_NUM8
5861 ENUMX
5862   BFD_RELOC_CR16_NUM16
5863 ENUMX
5864   BFD_RELOC_CR16_NUM32
5865 ENUMX
5866   BFD_RELOC_CR16_NUM32a
5867 ENUMX
5868   BFD_RELOC_CR16_REGREL0
5869 ENUMX
5870   BFD_RELOC_CR16_REGREL4
5871 ENUMX
5872   BFD_RELOC_CR16_REGREL4a
5873 ENUMX
5874   BFD_RELOC_CR16_REGREL14
5875 ENUMX
5876   BFD_RELOC_CR16_REGREL14a
5877 ENUMX
5878   BFD_RELOC_CR16_REGREL16
5879 ENUMX
5880   BFD_RELOC_CR16_REGREL20
5881 ENUMX
5882   BFD_RELOC_CR16_REGREL20a
5883 ENUMX
5884   BFD_RELOC_CR16_ABS20
5885 ENUMX
5886   BFD_RELOC_CR16_ABS24
5887 ENUMX
5888   BFD_RELOC_CR16_IMM4
5889 ENUMX
5890   BFD_RELOC_CR16_IMM8
5891 ENUMX
5892   BFD_RELOC_CR16_IMM16
5893 ENUMX
5894   BFD_RELOC_CR16_IMM20
5895 ENUMX
5896   BFD_RELOC_CR16_IMM24
5897 ENUMX
5898   BFD_RELOC_CR16_IMM32
5899 ENUMX
5900   BFD_RELOC_CR16_IMM32a
5901 ENUMX
5902   BFD_RELOC_CR16_DISP4
5903 ENUMX
5904   BFD_RELOC_CR16_DISP8
5905 ENUMX
5906   BFD_RELOC_CR16_DISP16
5907 ENUMX
5908   BFD_RELOC_CR16_DISP20
5909 ENUMX
5910   BFD_RELOC_CR16_DISP24
5911 ENUMX
5912   BFD_RELOC_CR16_DISP24a
5913 ENUMX
5914   BFD_RELOC_CR16_SWITCH8
5915 ENUMX
5916   BFD_RELOC_CR16_SWITCH16
5917 ENUMX
5918   BFD_RELOC_CR16_SWITCH32
5919 ENUMX
5920   BFD_RELOC_CR16_GOT_REGREL20
5921 ENUMX
5922   BFD_RELOC_CR16_GOTC_REGREL20
5923 ENUMX
5924   BFD_RELOC_CR16_GLOB_DAT
5925 ENUMDOC
5926   NS CR16 Relocations.
5927
5928 ENUM
5929   BFD_RELOC_CRX_REL4
5930 ENUMX
5931   BFD_RELOC_CRX_REL8
5932 ENUMX
5933   BFD_RELOC_CRX_REL8_CMP
5934 ENUMX
5935   BFD_RELOC_CRX_REL16
5936 ENUMX
5937   BFD_RELOC_CRX_REL24
5938 ENUMX
5939   BFD_RELOC_CRX_REL32
5940 ENUMX
5941   BFD_RELOC_CRX_REGREL12
5942 ENUMX
5943   BFD_RELOC_CRX_REGREL22
5944 ENUMX
5945   BFD_RELOC_CRX_REGREL28
5946 ENUMX
5947   BFD_RELOC_CRX_REGREL32
5948 ENUMX
5949   BFD_RELOC_CRX_ABS16
5950 ENUMX
5951   BFD_RELOC_CRX_ABS32
5952 ENUMX
5953   BFD_RELOC_CRX_NUM8
5954 ENUMX
5955   BFD_RELOC_CRX_NUM16
5956 ENUMX
5957   BFD_RELOC_CRX_NUM32
5958 ENUMX
5959   BFD_RELOC_CRX_IMM16
5960 ENUMX
5961   BFD_RELOC_CRX_IMM32
5962 ENUMX
5963   BFD_RELOC_CRX_SWITCH8
5964 ENUMX
5965   BFD_RELOC_CRX_SWITCH16
5966 ENUMX
5967   BFD_RELOC_CRX_SWITCH32
5968 ENUMDOC
5969   NS CRX Relocations.
5970
5971 ENUM
5972   BFD_RELOC_CRIS_BDISP8
5973 ENUMX
5974   BFD_RELOC_CRIS_UNSIGNED_5
5975 ENUMX
5976   BFD_RELOC_CRIS_SIGNED_6
5977 ENUMX
5978   BFD_RELOC_CRIS_UNSIGNED_6
5979 ENUMX
5980   BFD_RELOC_CRIS_SIGNED_8
5981 ENUMX
5982   BFD_RELOC_CRIS_UNSIGNED_8
5983 ENUMX
5984   BFD_RELOC_CRIS_SIGNED_16
5985 ENUMX
5986   BFD_RELOC_CRIS_UNSIGNED_16
5987 ENUMX
5988   BFD_RELOC_CRIS_LAPCQ_OFFSET
5989 ENUMX
5990   BFD_RELOC_CRIS_UNSIGNED_4
5991 ENUMDOC
5992   These relocs are only used within the CRIS assembler.  They are not
5993   (at present) written to any object files.
5994 ENUM
5995   BFD_RELOC_CRIS_COPY
5996 ENUMX
5997   BFD_RELOC_CRIS_GLOB_DAT
5998 ENUMX
5999   BFD_RELOC_CRIS_JUMP_SLOT
6000 ENUMX
6001   BFD_RELOC_CRIS_RELATIVE
6002 ENUMDOC
6003   Relocs used in ELF shared libraries for CRIS.
6004 ENUM
6005   BFD_RELOC_CRIS_32_GOT
6006 ENUMDOC
6007   32-bit offset to symbol-entry within GOT.
6008 ENUM
6009   BFD_RELOC_CRIS_16_GOT
6010 ENUMDOC
6011   16-bit offset to symbol-entry within GOT.
6012 ENUM
6013   BFD_RELOC_CRIS_32_GOTPLT
6014 ENUMDOC
6015   32-bit offset to symbol-entry within GOT, with PLT handling.
6016 ENUM
6017   BFD_RELOC_CRIS_16_GOTPLT
6018 ENUMDOC
6019   16-bit offset to symbol-entry within GOT, with PLT handling.
6020 ENUM
6021   BFD_RELOC_CRIS_32_GOTREL
6022 ENUMDOC
6023   32-bit offset to symbol, relative to GOT.
6024 ENUM
6025   BFD_RELOC_CRIS_32_PLT_GOTREL
6026 ENUMDOC
6027   32-bit offset to symbol with PLT entry, relative to GOT.
6028 ENUM
6029   BFD_RELOC_CRIS_32_PLT_PCREL
6030 ENUMDOC
6031   32-bit offset to symbol with PLT entry, relative to this relocation.
6032
6033 ENUM
6034   BFD_RELOC_CRIS_32_GOT_GD
6035 ENUMX
6036   BFD_RELOC_CRIS_16_GOT_GD
6037 ENUMX
6038   BFD_RELOC_CRIS_32_GD
6039 ENUMX
6040   BFD_RELOC_CRIS_DTP
6041 ENUMX
6042   BFD_RELOC_CRIS_32_DTPREL
6043 ENUMX
6044   BFD_RELOC_CRIS_16_DTPREL
6045 ENUMX
6046   BFD_RELOC_CRIS_32_GOT_TPREL
6047 ENUMX
6048   BFD_RELOC_CRIS_16_GOT_TPREL
6049 ENUMX
6050   BFD_RELOC_CRIS_32_TPREL
6051 ENUMX
6052   BFD_RELOC_CRIS_16_TPREL
6053 ENUMX
6054   BFD_RELOC_CRIS_DTPMOD
6055 ENUMX
6056   BFD_RELOC_CRIS_32_IE
6057 ENUMDOC
6058   Relocs used in TLS code for CRIS.
6059
6060 ENUM
6061   BFD_RELOC_860_COPY
6062 ENUMX
6063   BFD_RELOC_860_GLOB_DAT
6064 ENUMX
6065   BFD_RELOC_860_JUMP_SLOT
6066 ENUMX
6067   BFD_RELOC_860_RELATIVE
6068 ENUMX
6069   BFD_RELOC_860_PC26
6070 ENUMX
6071   BFD_RELOC_860_PLT26
6072 ENUMX
6073   BFD_RELOC_860_PC16
6074 ENUMX
6075   BFD_RELOC_860_LOW0
6076 ENUMX
6077   BFD_RELOC_860_SPLIT0
6078 ENUMX
6079   BFD_RELOC_860_LOW1
6080 ENUMX
6081   BFD_RELOC_860_SPLIT1
6082 ENUMX
6083   BFD_RELOC_860_LOW2
6084 ENUMX
6085   BFD_RELOC_860_SPLIT2
6086 ENUMX
6087   BFD_RELOC_860_LOW3
6088 ENUMX
6089   BFD_RELOC_860_LOGOT0
6090 ENUMX
6091   BFD_RELOC_860_SPGOT0
6092 ENUMX
6093   BFD_RELOC_860_LOGOT1
6094 ENUMX
6095   BFD_RELOC_860_SPGOT1
6096 ENUMX
6097   BFD_RELOC_860_LOGOTOFF0
6098 ENUMX
6099   BFD_RELOC_860_SPGOTOFF0
6100 ENUMX
6101   BFD_RELOC_860_LOGOTOFF1
6102 ENUMX
6103   BFD_RELOC_860_SPGOTOFF1
6104 ENUMX
6105   BFD_RELOC_860_LOGOTOFF2
6106 ENUMX
6107   BFD_RELOC_860_LOGOTOFF3
6108 ENUMX
6109   BFD_RELOC_860_LOPC
6110 ENUMX
6111   BFD_RELOC_860_HIGHADJ
6112 ENUMX
6113   BFD_RELOC_860_HAGOT
6114 ENUMX
6115   BFD_RELOC_860_HAGOTOFF
6116 ENUMX
6117   BFD_RELOC_860_HAPC
6118 ENUMX
6119   BFD_RELOC_860_HIGH
6120 ENUMX
6121   BFD_RELOC_860_HIGOT
6122 ENUMX
6123   BFD_RELOC_860_HIGOTOFF
6124 ENUMDOC
6125   Intel i860 Relocations.
6126
6127 ENUM
6128   BFD_RELOC_OR1K_REL_26
6129 ENUMX
6130   BFD_RELOC_OR1K_GOTPC_HI16
6131 ENUMX
6132   BFD_RELOC_OR1K_GOTPC_LO16
6133 ENUMX
6134   BFD_RELOC_OR1K_GOT16
6135 ENUMX
6136   BFD_RELOC_OR1K_PLT26
6137 ENUMX
6138   BFD_RELOC_OR1K_GOTOFF_HI16
6139 ENUMX
6140   BFD_RELOC_OR1K_GOTOFF_LO16
6141 ENUMX
6142   BFD_RELOC_OR1K_COPY
6143 ENUMX
6144   BFD_RELOC_OR1K_GLOB_DAT
6145 ENUMX
6146   BFD_RELOC_OR1K_JMP_SLOT
6147 ENUMX
6148   BFD_RELOC_OR1K_RELATIVE
6149 ENUMX
6150   BFD_RELOC_OR1K_TLS_GD_HI16
6151 ENUMX
6152   BFD_RELOC_OR1K_TLS_GD_LO16
6153 ENUMX
6154   BFD_RELOC_OR1K_TLS_LDM_HI16
6155 ENUMX
6156   BFD_RELOC_OR1K_TLS_LDM_LO16
6157 ENUMX
6158   BFD_RELOC_OR1K_TLS_LDO_HI16
6159 ENUMX
6160   BFD_RELOC_OR1K_TLS_LDO_LO16
6161 ENUMX
6162   BFD_RELOC_OR1K_TLS_IE_HI16
6163 ENUMX
6164   BFD_RELOC_OR1K_TLS_IE_LO16
6165 ENUMX
6166   BFD_RELOC_OR1K_TLS_LE_HI16
6167 ENUMX
6168   BFD_RELOC_OR1K_TLS_LE_LO16
6169 ENUMX
6170   BFD_RELOC_OR1K_TLS_TPOFF
6171 ENUMX
6172   BFD_RELOC_OR1K_TLS_DTPOFF
6173 ENUMX
6174   BFD_RELOC_OR1K_TLS_DTPMOD
6175 ENUMDOC
6176   OpenRISC 1000 Relocations.
6177
6178 ENUM
6179   BFD_RELOC_H8_DIR16A8
6180 ENUMX
6181   BFD_RELOC_H8_DIR16R8
6182 ENUMX
6183   BFD_RELOC_H8_DIR24A8
6184 ENUMX
6185   BFD_RELOC_H8_DIR24R8
6186 ENUMX
6187   BFD_RELOC_H8_DIR32A16
6188 ENUMX
6189   BFD_RELOC_H8_DISP32A16
6190 ENUMDOC
6191   H8 elf Relocations.
6192
6193 ENUM
6194   BFD_RELOC_XSTORMY16_REL_12
6195 ENUMX
6196   BFD_RELOC_XSTORMY16_12
6197 ENUMX
6198   BFD_RELOC_XSTORMY16_24
6199 ENUMX
6200   BFD_RELOC_XSTORMY16_FPTR16
6201 ENUMDOC
6202   Sony Xstormy16 Relocations.
6203
6204 ENUM
6205   BFD_RELOC_RELC
6206 ENUMDOC
6207   Self-describing complex relocations.
6208 COMMENT
6209
6210 ENUM
6211   BFD_RELOC_XC16X_PAG
6212 ENUMX
6213   BFD_RELOC_XC16X_POF
6214 ENUMX
6215   BFD_RELOC_XC16X_SEG
6216 ENUMX
6217   BFD_RELOC_XC16X_SOF
6218 ENUMDOC
6219   Infineon Relocations.
6220
6221 ENUM
6222   BFD_RELOC_VAX_GLOB_DAT
6223 ENUMX
6224   BFD_RELOC_VAX_JMP_SLOT
6225 ENUMX
6226   BFD_RELOC_VAX_RELATIVE
6227 ENUMDOC
6228   Relocations used by VAX ELF.
6229
6230 ENUM
6231   BFD_RELOC_MT_PC16
6232 ENUMDOC
6233   Morpho MT - 16 bit immediate relocation.
6234 ENUM
6235   BFD_RELOC_MT_HI16
6236 ENUMDOC
6237   Morpho MT - Hi 16 bits of an address.
6238 ENUM
6239   BFD_RELOC_MT_LO16
6240 ENUMDOC
6241   Morpho MT - Low 16 bits of an address.
6242 ENUM
6243   BFD_RELOC_MT_GNU_VTINHERIT
6244 ENUMDOC
6245   Morpho MT - Used to tell the linker which vtable entries are used.
6246 ENUM
6247   BFD_RELOC_MT_GNU_VTENTRY
6248 ENUMDOC
6249   Morpho MT - Used to tell the linker which vtable entries are used.
6250 ENUM
6251   BFD_RELOC_MT_PCINSN8
6252 ENUMDOC
6253   Morpho MT - 8 bit immediate relocation.
6254
6255 ENUM
6256   BFD_RELOC_MSP430_10_PCREL
6257 ENUMX
6258   BFD_RELOC_MSP430_16_PCREL
6259 ENUMX
6260   BFD_RELOC_MSP430_16
6261 ENUMX
6262   BFD_RELOC_MSP430_16_PCREL_BYTE
6263 ENUMX
6264   BFD_RELOC_MSP430_16_BYTE
6265 ENUMX
6266   BFD_RELOC_MSP430_2X_PCREL
6267 ENUMX
6268   BFD_RELOC_MSP430_RL_PCREL
6269 ENUMX
6270   BFD_RELOC_MSP430_ABS8
6271 ENUMX
6272   BFD_RELOC_MSP430X_PCR20_EXT_SRC
6273 ENUMX
6274   BFD_RELOC_MSP430X_PCR20_EXT_DST
6275 ENUMX
6276   BFD_RELOC_MSP430X_PCR20_EXT_ODST
6277 ENUMX
6278   BFD_RELOC_MSP430X_ABS20_EXT_SRC
6279 ENUMX
6280   BFD_RELOC_MSP430X_ABS20_EXT_DST
6281 ENUMX
6282   BFD_RELOC_MSP430X_ABS20_EXT_ODST
6283 ENUMX
6284   BFD_RELOC_MSP430X_ABS20_ADR_SRC
6285 ENUMX
6286   BFD_RELOC_MSP430X_ABS20_ADR_DST
6287 ENUMX
6288   BFD_RELOC_MSP430X_PCR16
6289 ENUMX
6290   BFD_RELOC_MSP430X_PCR20_CALL
6291 ENUMX
6292   BFD_RELOC_MSP430X_ABS16
6293 ENUMX
6294   BFD_RELOC_MSP430_ABS_HI16
6295 ENUMX
6296   BFD_RELOC_MSP430_PREL31
6297 ENUMX
6298   BFD_RELOC_MSP430_SYM_DIFF
6299 ENUMDOC
6300   msp430 specific relocation codes
6301
6302 ENUM
6303   BFD_RELOC_NIOS2_S16
6304 ENUMX
6305   BFD_RELOC_NIOS2_U16
6306 ENUMX
6307   BFD_RELOC_NIOS2_CALL26
6308 ENUMX
6309   BFD_RELOC_NIOS2_IMM5
6310 ENUMX
6311   BFD_RELOC_NIOS2_CACHE_OPX
6312 ENUMX
6313   BFD_RELOC_NIOS2_IMM6
6314 ENUMX
6315   BFD_RELOC_NIOS2_IMM8
6316 ENUMX
6317   BFD_RELOC_NIOS2_HI16
6318 ENUMX
6319   BFD_RELOC_NIOS2_LO16
6320 ENUMX
6321   BFD_RELOC_NIOS2_HIADJ16
6322 ENUMX
6323   BFD_RELOC_NIOS2_GPREL
6324 ENUMX
6325   BFD_RELOC_NIOS2_UJMP
6326 ENUMX
6327   BFD_RELOC_NIOS2_CJMP
6328 ENUMX
6329   BFD_RELOC_NIOS2_CALLR
6330 ENUMX
6331   BFD_RELOC_NIOS2_ALIGN
6332 ENUMX
6333   BFD_RELOC_NIOS2_GOT16
6334 ENUMX
6335   BFD_RELOC_NIOS2_CALL16
6336 ENUMX
6337   BFD_RELOC_NIOS2_GOTOFF_LO
6338 ENUMX
6339   BFD_RELOC_NIOS2_GOTOFF_HA
6340 ENUMX
6341   BFD_RELOC_NIOS2_PCREL_LO
6342 ENUMX
6343   BFD_RELOC_NIOS2_PCREL_HA
6344 ENUMX
6345   BFD_RELOC_NIOS2_TLS_GD16
6346 ENUMX
6347   BFD_RELOC_NIOS2_TLS_LDM16
6348 ENUMX
6349   BFD_RELOC_NIOS2_TLS_LDO16
6350 ENUMX
6351   BFD_RELOC_NIOS2_TLS_IE16
6352 ENUMX
6353   BFD_RELOC_NIOS2_TLS_LE16
6354 ENUMX
6355   BFD_RELOC_NIOS2_TLS_DTPMOD
6356 ENUMX
6357   BFD_RELOC_NIOS2_TLS_DTPREL
6358 ENUMX
6359   BFD_RELOC_NIOS2_TLS_TPREL
6360 ENUMX
6361   BFD_RELOC_NIOS2_COPY
6362 ENUMX
6363   BFD_RELOC_NIOS2_GLOB_DAT
6364 ENUMX
6365   BFD_RELOC_NIOS2_JUMP_SLOT
6366 ENUMX
6367   BFD_RELOC_NIOS2_RELATIVE
6368 ENUMX
6369   BFD_RELOC_NIOS2_GOTOFF
6370 ENUMX
6371   BFD_RELOC_NIOS2_CALL26_NOAT
6372 ENUMX
6373   BFD_RELOC_NIOS2_GOT_LO
6374 ENUMX
6375   BFD_RELOC_NIOS2_GOT_HA
6376 ENUMX
6377   BFD_RELOC_NIOS2_CALL_LO
6378 ENUMX
6379   BFD_RELOC_NIOS2_CALL_HA
6380 ENUMX
6381   BFD_RELOC_NIOS2_R2_S12
6382 ENUMX
6383   BFD_RELOC_NIOS2_R2_I10_1_PCREL
6384 ENUMX
6385   BFD_RELOC_NIOS2_R2_T1I7_1_PCREL
6386 ENUMX
6387   BFD_RELOC_NIOS2_R2_T1I7_2
6388 ENUMX
6389   BFD_RELOC_NIOS2_R2_T2I4
6390 ENUMX
6391   BFD_RELOC_NIOS2_R2_T2I4_1
6392 ENUMX
6393   BFD_RELOC_NIOS2_R2_T2I4_2
6394 ENUMX
6395   BFD_RELOC_NIOS2_R2_X1I7_2
6396 ENUMX
6397   BFD_RELOC_NIOS2_R2_X2L5
6398 ENUMX
6399   BFD_RELOC_NIOS2_R2_F1I5_2
6400 ENUMX
6401   BFD_RELOC_NIOS2_R2_L5I4X1
6402 ENUMX
6403   BFD_RELOC_NIOS2_R2_T1X1I6
6404 ENUMX
6405   BFD_RELOC_NIOS2_R2_T1X1I6_2
6406 ENUMDOC
6407   Relocations used by the Altera Nios II core.
6408
6409 ENUM
6410   BFD_RELOC_IQ2000_OFFSET_16
6411 ENUMX
6412   BFD_RELOC_IQ2000_OFFSET_21
6413 ENUMX
6414   BFD_RELOC_IQ2000_UHI16
6415 ENUMDOC
6416   IQ2000 Relocations.
6417
6418 ENUM
6419   BFD_RELOC_XTENSA_RTLD
6420 ENUMDOC
6421   Special Xtensa relocation used only by PLT entries in ELF shared
6422   objects to indicate that the runtime linker should set the value
6423   to one of its own internal functions or data structures.
6424 ENUM
6425   BFD_RELOC_XTENSA_GLOB_DAT
6426 ENUMX
6427   BFD_RELOC_XTENSA_JMP_SLOT
6428 ENUMX
6429   BFD_RELOC_XTENSA_RELATIVE
6430 ENUMDOC
6431   Xtensa relocations for ELF shared objects.
6432 ENUM
6433   BFD_RELOC_XTENSA_PLT
6434 ENUMDOC
6435   Xtensa relocation used in ELF object files for symbols that may require
6436   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
6437 ENUM
6438   BFD_RELOC_XTENSA_DIFF8
6439 ENUMX
6440   BFD_RELOC_XTENSA_DIFF16
6441 ENUMX
6442   BFD_RELOC_XTENSA_DIFF32
6443 ENUMDOC
6444   Xtensa relocations to mark the difference of two local symbols.
6445   These are only needed to support linker relaxation and can be ignored
6446   when not relaxing.  The field is set to the value of the difference
6447   assuming no relaxation.  The relocation encodes the position of the
6448   first symbol so the linker can determine whether to adjust the field
6449   value.
6450 ENUM
6451   BFD_RELOC_XTENSA_SLOT0_OP
6452 ENUMX
6453   BFD_RELOC_XTENSA_SLOT1_OP
6454 ENUMX
6455   BFD_RELOC_XTENSA_SLOT2_OP
6456 ENUMX
6457   BFD_RELOC_XTENSA_SLOT3_OP
6458 ENUMX
6459   BFD_RELOC_XTENSA_SLOT4_OP
6460 ENUMX
6461   BFD_RELOC_XTENSA_SLOT5_OP
6462 ENUMX
6463   BFD_RELOC_XTENSA_SLOT6_OP
6464 ENUMX
6465   BFD_RELOC_XTENSA_SLOT7_OP
6466 ENUMX
6467   BFD_RELOC_XTENSA_SLOT8_OP
6468 ENUMX
6469   BFD_RELOC_XTENSA_SLOT9_OP
6470 ENUMX
6471   BFD_RELOC_XTENSA_SLOT10_OP
6472 ENUMX
6473   BFD_RELOC_XTENSA_SLOT11_OP
6474 ENUMX
6475   BFD_RELOC_XTENSA_SLOT12_OP
6476 ENUMX
6477   BFD_RELOC_XTENSA_SLOT13_OP
6478 ENUMX
6479   BFD_RELOC_XTENSA_SLOT14_OP
6480 ENUMDOC
6481   Generic Xtensa relocations for instruction operands.  Only the slot
6482   number is encoded in the relocation.  The relocation applies to the
6483   last PC-relative immediate operand, or if there are no PC-relative
6484   immediates, to the last immediate operand.
6485 ENUM
6486   BFD_RELOC_XTENSA_SLOT0_ALT
6487 ENUMX
6488   BFD_RELOC_XTENSA_SLOT1_ALT
6489 ENUMX
6490   BFD_RELOC_XTENSA_SLOT2_ALT
6491 ENUMX
6492   BFD_RELOC_XTENSA_SLOT3_ALT
6493 ENUMX
6494   BFD_RELOC_XTENSA_SLOT4_ALT
6495 ENUMX
6496   BFD_RELOC_XTENSA_SLOT5_ALT
6497 ENUMX
6498   BFD_RELOC_XTENSA_SLOT6_ALT
6499 ENUMX
6500   BFD_RELOC_XTENSA_SLOT7_ALT
6501 ENUMX
6502   BFD_RELOC_XTENSA_SLOT8_ALT
6503 ENUMX
6504   BFD_RELOC_XTENSA_SLOT9_ALT
6505 ENUMX
6506   BFD_RELOC_XTENSA_SLOT10_ALT
6507 ENUMX
6508   BFD_RELOC_XTENSA_SLOT11_ALT
6509 ENUMX
6510   BFD_RELOC_XTENSA_SLOT12_ALT
6511 ENUMX
6512   BFD_RELOC_XTENSA_SLOT13_ALT
6513 ENUMX
6514   BFD_RELOC_XTENSA_SLOT14_ALT
6515 ENUMDOC
6516   Alternate Xtensa relocations.  Only the slot is encoded in the
6517   relocation.  The meaning of these relocations is opcode-specific.
6518 ENUM
6519   BFD_RELOC_XTENSA_OP0
6520 ENUMX
6521   BFD_RELOC_XTENSA_OP1
6522 ENUMX
6523   BFD_RELOC_XTENSA_OP2
6524 ENUMDOC
6525   Xtensa relocations for backward compatibility.  These have all been
6526   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6527 ENUM
6528   BFD_RELOC_XTENSA_ASM_EXPAND
6529 ENUMDOC
6530   Xtensa relocation to mark that the assembler expanded the
6531   instructions from an original target.  The expansion size is
6532   encoded in the reloc size.
6533 ENUM
6534   BFD_RELOC_XTENSA_ASM_SIMPLIFY
6535 ENUMDOC
6536   Xtensa relocation to mark that the linker should simplify
6537   assembler-expanded instructions.  This is commonly used
6538   internally by the linker after analysis of a
6539   BFD_RELOC_XTENSA_ASM_EXPAND.
6540 ENUM
6541   BFD_RELOC_XTENSA_TLSDESC_FN
6542 ENUMX
6543   BFD_RELOC_XTENSA_TLSDESC_ARG
6544 ENUMX
6545   BFD_RELOC_XTENSA_TLS_DTPOFF
6546 ENUMX
6547   BFD_RELOC_XTENSA_TLS_TPOFF
6548 ENUMX
6549   BFD_RELOC_XTENSA_TLS_FUNC
6550 ENUMX
6551   BFD_RELOC_XTENSA_TLS_ARG
6552 ENUMX
6553   BFD_RELOC_XTENSA_TLS_CALL
6554 ENUMDOC
6555   Xtensa TLS relocations.
6556
6557 ENUM
6558   BFD_RELOC_Z80_DISP8
6559 ENUMDOC
6560   8 bit signed offset in (ix+d) or (iy+d).
6561
6562 ENUM
6563   BFD_RELOC_Z8K_DISP7
6564 ENUMDOC
6565   DJNZ offset.
6566 ENUM
6567   BFD_RELOC_Z8K_CALLR
6568 ENUMDOC
6569   CALR offset.
6570 ENUM
6571   BFD_RELOC_Z8K_IMM4L
6572 ENUMDOC
6573   4 bit value.
6574
6575 ENUM
6576    BFD_RELOC_LM32_CALL
6577 ENUMX
6578    BFD_RELOC_LM32_BRANCH
6579 ENUMX
6580    BFD_RELOC_LM32_16_GOT
6581 ENUMX
6582    BFD_RELOC_LM32_GOTOFF_HI16
6583 ENUMX
6584    BFD_RELOC_LM32_GOTOFF_LO16
6585 ENUMX
6586    BFD_RELOC_LM32_COPY
6587 ENUMX
6588    BFD_RELOC_LM32_GLOB_DAT
6589 ENUMX
6590    BFD_RELOC_LM32_JMP_SLOT
6591 ENUMX
6592    BFD_RELOC_LM32_RELATIVE
6593 ENUMDOC
6594  Lattice Mico32 relocations.
6595
6596 ENUM
6597   BFD_RELOC_MACH_O_SECTDIFF
6598 ENUMDOC
6599   Difference between two section addreses.  Must be followed by a
6600   BFD_RELOC_MACH_O_PAIR.
6601 ENUM
6602   BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6603 ENUMDOC
6604   Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6605 ENUM
6606   BFD_RELOC_MACH_O_PAIR
6607 ENUMDOC
6608   Pair of relocation.  Contains the first symbol.
6609 ENUM
6610   BFD_RELOC_MACH_O_SUBTRACTOR32
6611 ENUMDOC
6612   Symbol will be substracted.  Must be followed by a BFD_RELOC_32.
6613 ENUM
6614   BFD_RELOC_MACH_O_SUBTRACTOR64
6615 ENUMDOC
6616   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6617
6618 ENUM
6619   BFD_RELOC_MACH_O_X86_64_BRANCH32
6620 ENUMX
6621   BFD_RELOC_MACH_O_X86_64_BRANCH8
6622 ENUMDOC
6623   PCREL relocations.  They are marked as branch to create PLT entry if
6624   required.
6625 ENUM
6626   BFD_RELOC_MACH_O_X86_64_GOT
6627 ENUMDOC
6628   Used when referencing a GOT entry.
6629 ENUM
6630   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6631 ENUMDOC
6632   Used when loading a GOT entry with movq.  It is specially marked so that
6633   the linker could optimize the movq to a leaq if possible.
6634 ENUM
6635   BFD_RELOC_MACH_O_X86_64_PCREL32_1
6636 ENUMDOC
6637   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6638 ENUM
6639   BFD_RELOC_MACH_O_X86_64_PCREL32_2
6640 ENUMDOC
6641   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6642 ENUM
6643   BFD_RELOC_MACH_O_X86_64_PCREL32_4
6644 ENUMDOC
6645   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6646
6647
6648 ENUM
6649   BFD_RELOC_MACH_O_ARM64_ADDEND
6650 ENUMDOC
6651   Addend for PAGE or PAGEOFF.
6652 ENUM
6653   BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGE21
6654 ENUMDOC
6655   Relative offset to page of GOT slot.
6656 ENUM
6657   BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGEOFF12
6658 ENUMDOC
6659   Relative offset within page of GOT slot.
6660 ENUM
6661   BFD_RELOC_MACH_O_ARM64_POINTER_TO_GOT
6662 ENUMDOC
6663   Address of a GOT entry.
6664
6665 ENUM
6666   BFD_RELOC_MICROBLAZE_32_LO
6667 ENUMDOC
6668   This is a 32 bit reloc for the microblaze that stores the
6669   low 16 bits of a value
6670 ENUM
6671   BFD_RELOC_MICROBLAZE_32_LO_PCREL
6672 ENUMDOC
6673   This is a 32 bit pc-relative reloc for the microblaze that
6674   stores the low 16 bits of a value
6675 ENUM
6676   BFD_RELOC_MICROBLAZE_32_ROSDA
6677 ENUMDOC
6678   This is a 32 bit reloc for the microblaze that stores a
6679   value relative to the read-only small data area anchor
6680 ENUM
6681   BFD_RELOC_MICROBLAZE_32_RWSDA
6682 ENUMDOC
6683   This is a 32 bit reloc for the microblaze that stores a
6684   value relative to the read-write small data area anchor
6685 ENUM
6686   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6687 ENUMDOC
6688   This is a 32 bit reloc for the microblaze to handle
6689   expressions of the form "Symbol Op Symbol"
6690 ENUM
6691   BFD_RELOC_MICROBLAZE_64_NONE
6692 ENUMDOC
6693   This is a 64 bit reloc that stores the 32 bit pc relative
6694   value in two words (with an imm instruction).  No relocation is
6695   done here - only used for relaxing
6696 ENUM
6697   BFD_RELOC_MICROBLAZE_64_GOTPC
6698 ENUMDOC
6699   This is a 64 bit reloc that stores the 32 bit pc relative
6700   value in two words (with an imm instruction).  The relocation is
6701   PC-relative GOT offset
6702 ENUM
6703   BFD_RELOC_MICROBLAZE_64_GOT
6704 ENUMDOC
6705   This is a 64 bit reloc that stores the 32 bit pc relative
6706   value in two words (with an imm instruction).  The relocation is
6707   GOT offset
6708 ENUM
6709   BFD_RELOC_MICROBLAZE_64_PLT
6710 ENUMDOC
6711   This is a 64 bit reloc that stores the 32 bit pc relative
6712   value in two words (with an imm instruction).  The relocation is
6713   PC-relative offset into PLT
6714 ENUM
6715   BFD_RELOC_MICROBLAZE_64_GOTOFF
6716 ENUMDOC
6717   This is a 64 bit reloc that stores the 32 bit GOT relative
6718   value in two words (with an imm instruction).  The relocation is
6719   relative offset from _GLOBAL_OFFSET_TABLE_
6720 ENUM
6721   BFD_RELOC_MICROBLAZE_32_GOTOFF
6722 ENUMDOC
6723   This is a 32 bit reloc that stores the 32 bit GOT relative
6724   value in a word.  The relocation is relative offset from
6725   _GLOBAL_OFFSET_TABLE_
6726 ENUM
6727   BFD_RELOC_MICROBLAZE_COPY
6728 ENUMDOC
6729   This is used to tell the dynamic linker to copy the value out of
6730   the dynamic object into the runtime process image.
6731 ENUM
6732   BFD_RELOC_MICROBLAZE_64_TLS
6733 ENUMDOC
6734   Unused Reloc
6735 ENUM
6736   BFD_RELOC_MICROBLAZE_64_TLSGD
6737 ENUMDOC
6738   This is a 64 bit reloc that stores the 32 bit GOT relative value
6739   of the GOT TLS GD info entry in two words (with an imm instruction). The
6740   relocation is GOT offset.
6741 ENUM
6742   BFD_RELOC_MICROBLAZE_64_TLSLD
6743 ENUMDOC
6744   This is a 64 bit reloc that stores the 32 bit GOT relative value
6745   of the GOT TLS LD info entry in two words (with an imm instruction). The
6746   relocation is GOT offset.
6747 ENUM
6748   BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6749 ENUMDOC
6750   This is a 32 bit reloc that stores the Module ID to GOT(n).
6751 ENUM
6752   BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6753 ENUMDOC
6754   This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6755 ENUM
6756   BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6757 ENUMDOC
6758   This is a 32 bit reloc for storing TLS offset to two words (uses imm
6759   instruction)
6760 ENUM
6761   BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6762 ENUMDOC
6763   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6764   to two words (uses imm instruction).
6765 ENUM
6766   BFD_RELOC_MICROBLAZE_64_TLSTPREL
6767 ENUMDOC
6768   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6769   to two words (uses imm instruction).
6770
6771 ENUM
6772   BFD_RELOC_AARCH64_RELOC_START
6773 ENUMDOC
6774   AArch64 pseudo relocation code to mark the start of the AArch64
6775   relocation enumerators.  N.B. the order of the enumerators is
6776   important as several tables in the AArch64 bfd backend are indexed
6777   by these enumerators; make sure they are all synced.
6778 ENUM
6779   BFD_RELOC_AARCH64_NONE
6780 ENUMDOC
6781   AArch64 null relocation code.
6782 ENUM
6783   BFD_RELOC_AARCH64_64
6784 ENUMX
6785   BFD_RELOC_AARCH64_32
6786 ENUMX
6787   BFD_RELOC_AARCH64_16
6788 ENUMDOC
6789   Basic absolute relocations of N bits.  These are equivalent to
6790 BFD_RELOC_N and they were added to assist the indexing of the howto
6791 table.
6792 ENUM
6793   BFD_RELOC_AARCH64_64_PCREL
6794 ENUMX
6795   BFD_RELOC_AARCH64_32_PCREL
6796 ENUMX
6797   BFD_RELOC_AARCH64_16_PCREL
6798 ENUMDOC
6799   PC-relative relocations.  These are equivalent to BFD_RELOC_N_PCREL
6800 and they were added to assist the indexing of the howto table.
6801 ENUM
6802   BFD_RELOC_AARCH64_MOVW_G0
6803 ENUMDOC
6804   AArch64 MOV[NZK] instruction with most significant bits 0 to 15
6805   of an unsigned address/value.
6806 ENUM
6807   BFD_RELOC_AARCH64_MOVW_G0_NC
6808 ENUMDOC
6809   AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
6810   an address/value.  No overflow checking.
6811 ENUM
6812   BFD_RELOC_AARCH64_MOVW_G1
6813 ENUMDOC
6814   AArch64 MOV[NZK] instruction with most significant bits 16 to 31
6815   of an unsigned address/value.
6816 ENUM
6817   BFD_RELOC_AARCH64_MOVW_G1_NC
6818 ENUMDOC
6819   AArch64 MOV[NZK] instruction with less significant bits 16 to 31
6820   of an address/value.  No overflow checking.
6821 ENUM
6822   BFD_RELOC_AARCH64_MOVW_G2
6823 ENUMDOC
6824   AArch64 MOV[NZK] instruction with most significant bits 32 to 47
6825   of an unsigned address/value.
6826 ENUM
6827   BFD_RELOC_AARCH64_MOVW_G2_NC
6828 ENUMDOC
6829   AArch64 MOV[NZK] instruction with less significant bits 32 to 47
6830   of an address/value.  No overflow checking.
6831 ENUM
6832   BFD_RELOC_AARCH64_MOVW_G3
6833 ENUMDOC
6834   AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
6835   of a signed or unsigned address/value.
6836 ENUM
6837   BFD_RELOC_AARCH64_MOVW_G0_S
6838 ENUMDOC
6839   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
6840   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6841   value's sign.
6842 ENUM
6843   BFD_RELOC_AARCH64_MOVW_G1_S
6844 ENUMDOC
6845   AArch64 MOV[NZ] instruction with most significant bits 16 to 31
6846   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6847   value's sign.
6848 ENUM
6849   BFD_RELOC_AARCH64_MOVW_G2_S
6850 ENUMDOC
6851   AArch64 MOV[NZ] instruction with most significant bits 32 to 47
6852   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6853   value's sign.
6854 ENUM
6855   BFD_RELOC_AARCH64_LD_LO19_PCREL
6856 ENUMDOC
6857   AArch64 Load Literal instruction, holding a 19 bit pc-relative word
6858   offset.  The lowest two bits must be zero and are not stored in the
6859   instruction, giving a 21 bit signed byte offset.
6860 ENUM
6861   BFD_RELOC_AARCH64_ADR_LO21_PCREL
6862 ENUMDOC
6863   AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
6864 ENUM
6865   BFD_RELOC_AARCH64_ADR_HI21_PCREL
6866 ENUMDOC
6867   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6868   offset, giving a 4KB aligned page base address.
6869 ENUM
6870   BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
6871 ENUMDOC
6872   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6873   offset, giving a 4KB aligned page base address, but with no overflow
6874   checking.
6875 ENUM
6876   BFD_RELOC_AARCH64_ADD_LO12
6877 ENUMDOC
6878   AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
6879   Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6880 ENUM
6881   BFD_RELOC_AARCH64_LDST8_LO12
6882 ENUMDOC
6883   AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
6884   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6885 ENUM
6886   BFD_RELOC_AARCH64_TSTBR14
6887 ENUMDOC
6888   AArch64 14 bit pc-relative test bit and branch.
6889   The lowest two bits must be zero and are not stored in the instruction,
6890   giving a 16 bit signed byte offset.
6891 ENUM
6892   BFD_RELOC_AARCH64_BRANCH19
6893 ENUMDOC
6894   AArch64 19 bit pc-relative conditional branch and compare & branch.
6895   The lowest two bits must be zero and are not stored in the instruction,
6896   giving a 21 bit signed byte offset.
6897 ENUM
6898   BFD_RELOC_AARCH64_JUMP26
6899 ENUMDOC
6900   AArch64 26 bit pc-relative unconditional branch.
6901   The lowest two bits must be zero and are not stored in the instruction,
6902   giving a 28 bit signed byte offset.
6903 ENUM
6904   BFD_RELOC_AARCH64_CALL26
6905 ENUMDOC
6906   AArch64 26 bit pc-relative unconditional branch and link.
6907   The lowest two bits must be zero and are not stored in the instruction,
6908   giving a 28 bit signed byte offset.
6909 ENUM
6910   BFD_RELOC_AARCH64_LDST16_LO12
6911 ENUMDOC
6912   AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
6913   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6914 ENUM
6915   BFD_RELOC_AARCH64_LDST32_LO12
6916 ENUMDOC
6917   AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
6918   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6919 ENUM
6920   BFD_RELOC_AARCH64_LDST64_LO12
6921 ENUMDOC
6922   AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
6923   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6924 ENUM
6925   BFD_RELOC_AARCH64_LDST128_LO12
6926 ENUMDOC
6927   AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
6928   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6929 ENUM
6930   BFD_RELOC_AARCH64_GOT_LD_PREL19
6931 ENUMDOC
6932   AArch64 Load Literal instruction, holding a 19 bit PC relative word
6933   offset of the global offset table entry for a symbol.  The lowest two
6934   bits must be zero and are not stored in the instruction, giving a 21
6935   bit signed byte offset.  This relocation type requires signed overflow
6936   checking.
6937 ENUM
6938   BFD_RELOC_AARCH64_ADR_GOT_PAGE
6939 ENUMDOC
6940   Get to the page base of the global offset table entry for a symbol as
6941   part of an ADRP instruction using a 21 bit PC relative value.Used in
6942   conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
6943 ENUM
6944   BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
6945 ENUMDOC
6946   Unsigned 12 bit byte offset for 64 bit load/store from the page of
6947   the GOT entry for this symbol.  Used in conjunction with
6948   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in LP64 ABI only.
6949 ENUM
6950   BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
6951 ENUMDOC
6952   Unsigned 12 bit byte offset for 32 bit load/store from the page of
6953   the GOT entry for this symbol.  Used in conjunction with
6954   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in ILP32 ABI only.
6955  ENUM
6956   BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC
6957 ENUMDOC
6958   Unsigned 16 bit byte offset for 64 bit load/store from the GOT entry
6959   for this symbol.  Valid in LP64 ABI only.
6960 ENUM
6961   BFD_RELOC_AARCH64_MOVW_GOTOFF_G1
6962 ENUMDOC
6963   Unsigned 16 bit byte higher offset for 64 bit load/store from the GOT entry
6964   for this symbol.  Valid in LP64 ABI only.
6965 ENUM
6966   BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
6967 ENUMDOC
6968   Unsigned 15 bit byte offset for 64 bit load/store from the page of
6969   the GOT entry for this symbol.  Valid in LP64 ABI only.
6970 ENUM
6971   BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14
6972 ENUMDOC
6973   Scaled 14 bit byte offset to the page base of the global offset table.
6974 ENUM
6975   BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15
6976 ENUMDOC
6977   Scaled 15 bit byte offset to the page base of the global offset table.
6978 ENUM
6979   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
6980 ENUMDOC
6981   Get to the page base of the global offset table entry for a symbols
6982   tls_index structure as part of an adrp instruction using a 21 bit PC
6983   relative value.  Used in conjunction with
6984   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
6985 ENUM
6986   BFD_RELOC_AARCH64_TLSGD_ADR_PREL21
6987 ENUMDOC
6988   AArch64 TLS General Dynamic
6989 ENUM
6990   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
6991 ENUMDOC
6992   Unsigned 12 bit byte offset to global offset table entry for a symbols
6993   tls_index structure.  Used in conjunction with
6994   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
6995 ENUM
6996   BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC
6997 ENUMDOC
6998   AArch64 TLS General Dynamic relocation.
6999 ENUM
7000   BFD_RELOC_AARCH64_TLSGD_MOVW_G1
7001 ENUMDOC
7002   AArch64 TLS General Dynamic relocation.
7003 ENUM
7004   BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
7005 ENUMDOC
7006   AArch64 TLS INITIAL EXEC relocation.
7007 ENUM
7008   BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
7009 ENUMDOC
7010   AArch64 TLS INITIAL EXEC relocation.
7011 ENUM
7012   BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
7013 ENUMDOC
7014   AArch64 TLS INITIAL EXEC relocation.
7015 ENUM
7016   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
7017 ENUMDOC
7018   AArch64 TLS INITIAL EXEC relocation.
7019 ENUM
7020   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
7021 ENUMDOC
7022   AArch64 TLS INITIAL EXEC relocation.
7023 ENUM
7024   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
7025 ENUMDOC
7026   AArch64 TLS INITIAL EXEC relocation.
7027 ENUM
7028   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12
7029 ENUMDOC
7030   bit[23:12] of byte offset to module TLS base address.
7031 ENUM
7032   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12
7033 ENUMDOC
7034   Unsigned 12 bit byte offset to module TLS base address.
7035 ENUM
7036   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
7037 ENUMDOC
7038   No overflow check version of BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
7039 ENUM
7040   BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC
7041 ENUMDOC
7042   Unsigned 12 bit byte offset to global offset table entry for a symbols
7043   tls_index structure.  Used in conjunction with
7044   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
7045 ENUM
7046   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21
7047 ENUMDOC
7048   GOT entry page address for AArch64 TLS Local Dynamic, used with ADRP
7049   instruction.
7050 ENUM
7051   BFD_RELOC_AARCH64_TLSLD_ADR_PREL21
7052 ENUMDOC
7053   GOT entry address for AArch64 TLS Local Dynamic, used with ADR instruction.
7054 ENUM
7055   BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12
7056 ENUMDOC
7057   bit[11:1] of byte offset to module TLS base address, encoded in ldst
7058   instructions.
7059 ENUM
7060   BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC
7061 ENUMDOC
7062   Similar as BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12, but no overflow check.
7063 ENUM
7064   BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12
7065 ENUMDOC
7066   bit[11:2] of byte offset to module TLS base address, encoded in ldst
7067   instructions.
7068 ENUM
7069   BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC
7070 ENUMDOC
7071   Similar as BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12, but no overflow check.
7072 ENUM
7073   BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12
7074 ENUMDOC
7075   bit[11:3] of byte offset to module TLS base address, encoded in ldst
7076   instructions.
7077 ENUM
7078   BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC
7079 ENUMDOC
7080   Similar as BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12, but no overflow check.
7081 ENUM
7082   BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12
7083 ENUMDOC
7084   bit[11:0] of byte offset to module TLS base address, encoded in ldst
7085   instructions.
7086 ENUM
7087   BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC
7088 ENUMDOC
7089   Similar as BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12, but no overflow check.
7090 ENUM
7091   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7092 ENUMDOC
7093   bit[15:0] of byte offset to module TLS base address.
7094 ENUM
7095   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC
7096 ENUMDOC
7097   No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7098 ENUM
7099   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7100 ENUMDOC
7101   bit[31:16] of byte offset to module TLS base address.
7102 ENUM
7103   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC
7104 ENUMDOC
7105   No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7106 ENUM
7107   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2
7108 ENUMDOC
7109   bit[47:32] of byte offset to module TLS base address.
7110 ENUM
7111   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
7112 ENUMDOC
7113   AArch64 TLS LOCAL EXEC relocation.
7114 ENUM
7115   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
7116 ENUMDOC
7117   AArch64 TLS LOCAL EXEC relocation.
7118 ENUM
7119   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
7120 ENUMDOC
7121   AArch64 TLS LOCAL EXEC relocation.
7122 ENUM
7123   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
7124 ENUMDOC
7125   AArch64 TLS LOCAL EXEC relocation.
7126 ENUM
7127   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
7128 ENUMDOC
7129   AArch64 TLS LOCAL EXEC relocation.
7130 ENUM
7131   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
7132 ENUMDOC
7133   AArch64 TLS LOCAL EXEC relocation.
7134 ENUM
7135   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
7136 ENUMDOC
7137   AArch64 TLS LOCAL EXEC relocation.
7138 ENUM
7139   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
7140 ENUMDOC
7141   AArch64 TLS LOCAL EXEC relocation.
7142 ENUM
7143   BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
7144 ENUMDOC
7145   AArch64 TLS DESC relocation.
7146 ENUM
7147   BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
7148 ENUMDOC
7149   AArch64 TLS DESC relocation.
7150 ENUM
7151   BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
7152 ENUMDOC
7153   AArch64 TLS DESC relocation.
7154 ENUM
7155   BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC
7156 ENUMDOC
7157   AArch64 TLS DESC relocation.
7158 ENUM
7159   BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
7160 ENUMDOC
7161   AArch64 TLS DESC relocation.
7162 ENUM
7163   BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC
7164 ENUMDOC
7165   AArch64 TLS DESC relocation.
7166 ENUM
7167   BFD_RELOC_AARCH64_TLSDESC_OFF_G1
7168 ENUMDOC
7169   AArch64 TLS DESC relocation.
7170 ENUM
7171   BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
7172 ENUMDOC
7173   AArch64 TLS DESC relocation.
7174 ENUM
7175   BFD_RELOC_AARCH64_TLSDESC_LDR
7176 ENUMDOC
7177   AArch64 TLS DESC relocation.
7178 ENUM
7179   BFD_RELOC_AARCH64_TLSDESC_ADD
7180 ENUMDOC
7181   AArch64 TLS DESC relocation.
7182 ENUM
7183   BFD_RELOC_AARCH64_TLSDESC_CALL
7184 ENUMDOC
7185   AArch64 TLS DESC relocation.
7186 ENUM
7187   BFD_RELOC_AARCH64_COPY
7188 ENUMDOC
7189   AArch64 TLS relocation.
7190 ENUM
7191   BFD_RELOC_AARCH64_GLOB_DAT
7192 ENUMDOC
7193   AArch64 TLS relocation.
7194 ENUM
7195   BFD_RELOC_AARCH64_JUMP_SLOT
7196 ENUMDOC
7197   AArch64 TLS relocation.
7198 ENUM
7199   BFD_RELOC_AARCH64_RELATIVE
7200 ENUMDOC
7201   AArch64 TLS relocation.
7202 ENUM
7203   BFD_RELOC_AARCH64_TLS_DTPMOD
7204 ENUMDOC
7205   AArch64 TLS relocation.
7206 ENUM
7207   BFD_RELOC_AARCH64_TLS_DTPREL
7208 ENUMDOC
7209   AArch64 TLS relocation.
7210 ENUM
7211   BFD_RELOC_AARCH64_TLS_TPREL
7212 ENUMDOC
7213   AArch64 TLS relocation.
7214 ENUM
7215   BFD_RELOC_AARCH64_TLSDESC
7216 ENUMDOC
7217   AArch64 TLS relocation.
7218 ENUM
7219   BFD_RELOC_AARCH64_IRELATIVE
7220 ENUMDOC
7221   AArch64 support for STT_GNU_IFUNC.
7222 ENUM
7223   BFD_RELOC_AARCH64_RELOC_END
7224 ENUMDOC
7225   AArch64 pseudo relocation code to mark the end of the AArch64
7226   relocation enumerators that have direct mapping to ELF reloc codes.
7227   There are a few more enumerators after this one; those are mainly
7228   used by the AArch64 assembler for the internal fixup or to select
7229   one of the above enumerators.
7230 ENUM
7231   BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
7232 ENUMDOC
7233   AArch64 pseudo relocation code to be used internally by the AArch64
7234   assembler and not (currently) written to any object files.
7235 ENUM
7236   BFD_RELOC_AARCH64_LDST_LO12
7237 ENUMDOC
7238   AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
7239   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7240 ENUM
7241   BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12
7242 ENUMDOC
7243   AArch64 pseudo relocation code for TLS local dynamic mode.  It's to be
7244   used internally by the AArch64 assembler and not (currently) written to
7245   any object files.
7246 ENUM
7247   BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12_NC
7248 ENUMDOC
7249   Similar as BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12, but no overflow check.
7250 ENUM
7251   BFD_RELOC_AARCH64_LD_GOT_LO12_NC
7252 ENUMDOC
7253   AArch64 pseudo relocation code to be used internally by the AArch64
7254   assembler and not (currently) written to any object files.
7255 ENUM
7256   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
7257 ENUMDOC
7258   AArch64 pseudo relocation code to be used internally by the AArch64
7259   assembler and not (currently) written to any object files.
7260 ENUM
7261   BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
7262 ENUMDOC
7263   AArch64 pseudo relocation code to be used internally by the AArch64
7264   assembler and not (currently) written to any object files.
7265 ENUM
7266   BFD_RELOC_TILEPRO_COPY
7267 ENUMX
7268   BFD_RELOC_TILEPRO_GLOB_DAT
7269 ENUMX
7270   BFD_RELOC_TILEPRO_JMP_SLOT
7271 ENUMX
7272   BFD_RELOC_TILEPRO_RELATIVE
7273 ENUMX
7274   BFD_RELOC_TILEPRO_BROFF_X1
7275 ENUMX
7276   BFD_RELOC_TILEPRO_JOFFLONG_X1
7277 ENUMX
7278   BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
7279 ENUMX
7280   BFD_RELOC_TILEPRO_IMM8_X0
7281 ENUMX
7282   BFD_RELOC_TILEPRO_IMM8_Y0
7283 ENUMX
7284   BFD_RELOC_TILEPRO_IMM8_X1
7285 ENUMX
7286   BFD_RELOC_TILEPRO_IMM8_Y1
7287 ENUMX
7288   BFD_RELOC_TILEPRO_DEST_IMM8_X1
7289 ENUMX
7290   BFD_RELOC_TILEPRO_MT_IMM15_X1
7291 ENUMX
7292   BFD_RELOC_TILEPRO_MF_IMM15_X1
7293 ENUMX
7294   BFD_RELOC_TILEPRO_IMM16_X0
7295 ENUMX
7296   BFD_RELOC_TILEPRO_IMM16_X1
7297 ENUMX
7298   BFD_RELOC_TILEPRO_IMM16_X0_LO
7299 ENUMX
7300   BFD_RELOC_TILEPRO_IMM16_X1_LO
7301 ENUMX
7302   BFD_RELOC_TILEPRO_IMM16_X0_HI
7303 ENUMX
7304   BFD_RELOC_TILEPRO_IMM16_X1_HI
7305 ENUMX
7306   BFD_RELOC_TILEPRO_IMM16_X0_HA
7307 ENUMX
7308   BFD_RELOC_TILEPRO_IMM16_X1_HA
7309 ENUMX
7310   BFD_RELOC_TILEPRO_IMM16_X0_PCREL
7311 ENUMX
7312   BFD_RELOC_TILEPRO_IMM16_X1_PCREL
7313 ENUMX
7314   BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
7315 ENUMX
7316   BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
7317 ENUMX
7318   BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
7319 ENUMX
7320   BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
7321 ENUMX
7322   BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
7323 ENUMX
7324   BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
7325 ENUMX
7326   BFD_RELOC_TILEPRO_IMM16_X0_GOT
7327 ENUMX
7328   BFD_RELOC_TILEPRO_IMM16_X1_GOT
7329 ENUMX
7330   BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
7331 ENUMX
7332   BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
7333 ENUMX
7334   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
7335 ENUMX
7336   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
7337 ENUMX
7338   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
7339 ENUMX
7340   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
7341 ENUMX
7342   BFD_RELOC_TILEPRO_MMSTART_X0
7343 ENUMX
7344   BFD_RELOC_TILEPRO_MMEND_X0
7345 ENUMX
7346   BFD_RELOC_TILEPRO_MMSTART_X1
7347 ENUMX
7348   BFD_RELOC_TILEPRO_MMEND_X1
7349 ENUMX
7350   BFD_RELOC_TILEPRO_SHAMT_X0
7351 ENUMX
7352   BFD_RELOC_TILEPRO_SHAMT_X1
7353 ENUMX
7354   BFD_RELOC_TILEPRO_SHAMT_Y0
7355 ENUMX
7356   BFD_RELOC_TILEPRO_SHAMT_Y1
7357 ENUMX
7358   BFD_RELOC_TILEPRO_TLS_GD_CALL
7359 ENUMX
7360   BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
7361 ENUMX
7362   BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
7363 ENUMX
7364   BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
7365 ENUMX
7366   BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
7367 ENUMX
7368   BFD_RELOC_TILEPRO_TLS_IE_LOAD
7369 ENUMX
7370   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
7371 ENUMX
7372   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
7373 ENUMX
7374   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
7375 ENUMX
7376   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
7377 ENUMX
7378   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
7379 ENUMX
7380   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
7381 ENUMX
7382   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
7383 ENUMX
7384   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
7385 ENUMX
7386   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
7387 ENUMX
7388   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
7389 ENUMX
7390   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
7391 ENUMX
7392   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
7393 ENUMX
7394   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
7395 ENUMX
7396   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
7397 ENUMX
7398   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
7399 ENUMX
7400   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
7401 ENUMX
7402   BFD_RELOC_TILEPRO_TLS_DTPMOD32
7403 ENUMX
7404   BFD_RELOC_TILEPRO_TLS_DTPOFF32
7405 ENUMX
7406   BFD_RELOC_TILEPRO_TLS_TPOFF32
7407 ENUMX
7408   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7409 ENUMX
7410   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7411 ENUMX
7412   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7413 ENUMX
7414   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7415 ENUMX
7416   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7417 ENUMX
7418   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7419 ENUMX
7420   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7421 ENUMX
7422   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7423 ENUMDOC
7424   Tilera TILEPro Relocations.
7425 ENUM
7426   BFD_RELOC_TILEGX_HW0
7427 ENUMX
7428   BFD_RELOC_TILEGX_HW1
7429 ENUMX
7430   BFD_RELOC_TILEGX_HW2
7431 ENUMX
7432   BFD_RELOC_TILEGX_HW3
7433 ENUMX
7434   BFD_RELOC_TILEGX_HW0_LAST
7435 ENUMX
7436   BFD_RELOC_TILEGX_HW1_LAST
7437 ENUMX
7438   BFD_RELOC_TILEGX_HW2_LAST
7439 ENUMX
7440   BFD_RELOC_TILEGX_COPY
7441 ENUMX
7442   BFD_RELOC_TILEGX_GLOB_DAT
7443 ENUMX
7444   BFD_RELOC_TILEGX_JMP_SLOT
7445 ENUMX
7446   BFD_RELOC_TILEGX_RELATIVE
7447 ENUMX
7448   BFD_RELOC_TILEGX_BROFF_X1
7449 ENUMX
7450   BFD_RELOC_TILEGX_JUMPOFF_X1
7451 ENUMX
7452   BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7453 ENUMX
7454   BFD_RELOC_TILEGX_IMM8_X0
7455 ENUMX
7456   BFD_RELOC_TILEGX_IMM8_Y0
7457 ENUMX
7458   BFD_RELOC_TILEGX_IMM8_X1
7459 ENUMX
7460   BFD_RELOC_TILEGX_IMM8_Y1
7461 ENUMX
7462   BFD_RELOC_TILEGX_DEST_IMM8_X1
7463 ENUMX
7464   BFD_RELOC_TILEGX_MT_IMM14_X1
7465 ENUMX
7466   BFD_RELOC_TILEGX_MF_IMM14_X1
7467 ENUMX
7468   BFD_RELOC_TILEGX_MMSTART_X0
7469 ENUMX
7470   BFD_RELOC_TILEGX_MMEND_X0
7471 ENUMX
7472   BFD_RELOC_TILEGX_SHAMT_X0
7473 ENUMX
7474   BFD_RELOC_TILEGX_SHAMT_X1
7475 ENUMX
7476   BFD_RELOC_TILEGX_SHAMT_Y0
7477 ENUMX
7478   BFD_RELOC_TILEGX_SHAMT_Y1
7479 ENUMX
7480   BFD_RELOC_TILEGX_IMM16_X0_HW0
7481 ENUMX
7482   BFD_RELOC_TILEGX_IMM16_X1_HW0
7483 ENUMX
7484   BFD_RELOC_TILEGX_IMM16_X0_HW1
7485 ENUMX
7486   BFD_RELOC_TILEGX_IMM16_X1_HW1
7487 ENUMX
7488   BFD_RELOC_TILEGX_IMM16_X0_HW2
7489 ENUMX
7490   BFD_RELOC_TILEGX_IMM16_X1_HW2
7491 ENUMX
7492   BFD_RELOC_TILEGX_IMM16_X0_HW3
7493 ENUMX
7494   BFD_RELOC_TILEGX_IMM16_X1_HW3
7495 ENUMX
7496   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7497 ENUMX
7498   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7499 ENUMX
7500   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7501 ENUMX
7502   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7503 ENUMX
7504   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7505 ENUMX
7506   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7507 ENUMX
7508   BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7509 ENUMX
7510   BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7511 ENUMX
7512   BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7513 ENUMX
7514   BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7515 ENUMX
7516   BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7517 ENUMX
7518   BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7519 ENUMX
7520   BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7521 ENUMX
7522   BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7523 ENUMX
7524   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7525 ENUMX
7526   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7527 ENUMX
7528   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7529 ENUMX
7530   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7531 ENUMX
7532   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7533 ENUMX
7534   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7535 ENUMX
7536   BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7537 ENUMX
7538   BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7539 ENUMX
7540   BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7541 ENUMX
7542   BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7543 ENUMX
7544   BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7545 ENUMX
7546   BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7547 ENUMX
7548   BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7549 ENUMX
7550   BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7551 ENUMX
7552   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7553 ENUMX
7554   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7555 ENUMX
7556   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7557 ENUMX
7558   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7559 ENUMX
7560   BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7561 ENUMX
7562   BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7563 ENUMX
7564   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7565 ENUMX
7566   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7567 ENUMX
7568   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7569 ENUMX
7570   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7571 ENUMX
7572   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7573 ENUMX
7574   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7575 ENUMX
7576   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7577 ENUMX
7578   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7579 ENUMX
7580   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7581 ENUMX
7582   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7583 ENUMX
7584   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7585 ENUMX
7586   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7587 ENUMX
7588   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7589 ENUMX
7590   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7591 ENUMX
7592   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7593 ENUMX
7594   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7595 ENUMX
7596   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7597 ENUMX
7598   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7599 ENUMX
7600   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7601 ENUMX
7602   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7603 ENUMX
7604   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7605 ENUMX
7606   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7607 ENUMX
7608   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7609 ENUMX
7610   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7611 ENUMX
7612   BFD_RELOC_TILEGX_TLS_DTPMOD64
7613 ENUMX
7614   BFD_RELOC_TILEGX_TLS_DTPOFF64
7615 ENUMX
7616   BFD_RELOC_TILEGX_TLS_TPOFF64
7617 ENUMX
7618   BFD_RELOC_TILEGX_TLS_DTPMOD32
7619 ENUMX
7620   BFD_RELOC_TILEGX_TLS_DTPOFF32
7621 ENUMX
7622   BFD_RELOC_TILEGX_TLS_TPOFF32
7623 ENUMX
7624   BFD_RELOC_TILEGX_TLS_GD_CALL
7625 ENUMX
7626   BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7627 ENUMX
7628   BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7629 ENUMX
7630   BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7631 ENUMX
7632   BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7633 ENUMX
7634   BFD_RELOC_TILEGX_TLS_IE_LOAD
7635 ENUMX
7636   BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7637 ENUMX
7638   BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7639 ENUMX
7640   BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7641 ENUMX
7642   BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7643 ENUMDOC
7644   Tilera TILE-Gx Relocations.
7645
7646 ENUM
7647   BFD_RELOC_EPIPHANY_SIMM8
7648 ENUMDOC
7649   Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7650 ENUM
7651   BFD_RELOC_EPIPHANY_SIMM24
7652 ENUMDOC
7653   Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7654 ENUM
7655   BFD_RELOC_EPIPHANY_HIGH
7656 ENUMDOC
7657   Adapteva EPIPHANY - 16 most-significant bits of absolute address
7658 ENUM
7659   BFD_RELOC_EPIPHANY_LOW
7660 ENUMDOC
7661   Adapteva EPIPHANY - 16 least-significant bits of absolute address
7662 ENUM
7663   BFD_RELOC_EPIPHANY_SIMM11
7664 ENUMDOC
7665   Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7666 ENUM
7667   BFD_RELOC_EPIPHANY_IMM11
7668 ENUMDOC
7669   Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7670 ENUM
7671   BFD_RELOC_EPIPHANY_IMM8
7672 ENUMDOC
7673   Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7674
7675 ENUM
7676   BFD_RELOC_VISIUM_HI16
7677 ENUMX
7678   BFD_RELOC_VISIUM_LO16
7679 ENUMX
7680   BFD_RELOC_VISIUM_IM16
7681 ENUMX
7682   BFD_RELOC_VISIUM_REL16
7683 ENUMX
7684   BFD_RELOC_VISIUM_HI16_PCREL
7685 ENUMX
7686   BFD_RELOC_VISIUM_LO16_PCREL
7687 ENUMX
7688   BFD_RELOC_VISIUM_IM16_PCREL
7689 ENUMDOC
7690   Visium Relocations.
7691
7692 ENDSENUM
7693   BFD_RELOC_UNUSED
7694 CODE_FRAGMENT
7695 .
7696 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
7697 */
7698
7699 /*
7700 FUNCTION
7701         bfd_reloc_type_lookup
7702         bfd_reloc_name_lookup
7703
7704 SYNOPSIS
7705         reloc_howto_type *bfd_reloc_type_lookup
7706           (bfd *abfd, bfd_reloc_code_real_type code);
7707         reloc_howto_type *bfd_reloc_name_lookup
7708           (bfd *abfd, const char *reloc_name);
7709
7710 DESCRIPTION
7711         Return a pointer to a howto structure which, when
7712         invoked, will perform the relocation @var{code} on data from the
7713         architecture noted.
7714
7715 */
7716
7717 reloc_howto_type *
7718 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7719 {
7720   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
7721 }
7722
7723 reloc_howto_type *
7724 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
7725 {
7726   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
7727 }
7728
7729 static reloc_howto_type bfd_howto_32 =
7730 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
7731
7732 /*
7733 INTERNAL_FUNCTION
7734         bfd_default_reloc_type_lookup
7735
7736 SYNOPSIS
7737         reloc_howto_type *bfd_default_reloc_type_lookup
7738           (bfd *abfd, bfd_reloc_code_real_type  code);
7739
7740 DESCRIPTION
7741         Provides a default relocation lookup routine for any architecture.
7742
7743 */
7744
7745 reloc_howto_type *
7746 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7747 {
7748   switch (code)
7749     {
7750     case BFD_RELOC_CTOR:
7751       /* The type of reloc used in a ctor, which will be as wide as the
7752          address - so either a 64, 32, or 16 bitter.  */
7753       switch (bfd_arch_bits_per_address (abfd))
7754         {
7755         case 64:
7756           BFD_FAIL ();
7757         case 32:
7758           return &bfd_howto_32;
7759         case 16:
7760           BFD_FAIL ();
7761         default:
7762           BFD_FAIL ();
7763         }
7764     default:
7765       BFD_FAIL ();
7766     }
7767   return NULL;
7768 }
7769
7770 /*
7771 FUNCTION
7772         bfd_get_reloc_code_name
7773
7774 SYNOPSIS
7775         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
7776
7777 DESCRIPTION
7778         Provides a printable name for the supplied relocation code.
7779         Useful mainly for printing error messages.
7780 */
7781
7782 const char *
7783 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
7784 {
7785   if (code > BFD_RELOC_UNUSED)
7786     return 0;
7787   return bfd_reloc_code_real_names[code];
7788 }
7789
7790 /*
7791 INTERNAL_FUNCTION
7792         bfd_generic_relax_section
7793
7794 SYNOPSIS
7795         bfd_boolean bfd_generic_relax_section
7796           (bfd *abfd,
7797            asection *section,
7798            struct bfd_link_info *,
7799            bfd_boolean *);
7800
7801 DESCRIPTION
7802         Provides default handling for relaxing for back ends which
7803         don't do relaxing.
7804 */
7805
7806 bfd_boolean
7807 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
7808                            asection *section ATTRIBUTE_UNUSED,
7809                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
7810                            bfd_boolean *again)
7811 {
7812   if (bfd_link_relocatable (link_info))
7813     (*link_info->callbacks->einfo)
7814       (_("%P%F: --relax and -r may not be used together\n"));
7815
7816   *again = FALSE;
7817   return TRUE;
7818 }
7819
7820 /*
7821 INTERNAL_FUNCTION
7822         bfd_generic_gc_sections
7823
7824 SYNOPSIS
7825         bfd_boolean bfd_generic_gc_sections
7826           (bfd *, struct bfd_link_info *);
7827
7828 DESCRIPTION
7829         Provides default handling for relaxing for back ends which
7830         don't do section gc -- i.e., does nothing.
7831 */
7832
7833 bfd_boolean
7834 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
7835                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
7836 {
7837   return TRUE;
7838 }
7839
7840 /*
7841 INTERNAL_FUNCTION
7842         bfd_generic_lookup_section_flags
7843
7844 SYNOPSIS
7845         bfd_boolean bfd_generic_lookup_section_flags
7846           (struct bfd_link_info *, struct flag_info *, asection *);
7847
7848 DESCRIPTION
7849         Provides default handling for section flags lookup
7850         -- i.e., does nothing.
7851         Returns FALSE if the section should be omitted, otherwise TRUE.
7852 */
7853
7854 bfd_boolean
7855 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
7856                                   struct flag_info *flaginfo,
7857                                   asection *section ATTRIBUTE_UNUSED)
7858 {
7859   if (flaginfo != NULL)
7860     {
7861       (*_bfd_error_handler) (_("INPUT_SECTION_FLAGS are not supported.\n"));
7862       return FALSE;
7863     }
7864   return TRUE;
7865 }
7866
7867 /*
7868 INTERNAL_FUNCTION
7869         bfd_generic_merge_sections
7870
7871 SYNOPSIS
7872         bfd_boolean bfd_generic_merge_sections
7873           (bfd *, struct bfd_link_info *);
7874
7875 DESCRIPTION
7876         Provides default handling for SEC_MERGE section merging for back ends
7877         which don't have SEC_MERGE support -- i.e., does nothing.
7878 */
7879
7880 bfd_boolean
7881 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
7882                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
7883 {
7884   return TRUE;
7885 }
7886
7887 /*
7888 INTERNAL_FUNCTION
7889         bfd_generic_get_relocated_section_contents
7890
7891 SYNOPSIS
7892         bfd_byte *bfd_generic_get_relocated_section_contents
7893           (bfd *abfd,
7894            struct bfd_link_info *link_info,
7895            struct bfd_link_order *link_order,
7896            bfd_byte *data,
7897            bfd_boolean relocatable,
7898            asymbol **symbols);
7899
7900 DESCRIPTION
7901         Provides default handling of relocation effort for back ends
7902         which can't be bothered to do it efficiently.
7903
7904 */
7905
7906 bfd_byte *
7907 bfd_generic_get_relocated_section_contents (bfd *abfd,
7908                                             struct bfd_link_info *link_info,
7909                                             struct bfd_link_order *link_order,
7910                                             bfd_byte *data,
7911                                             bfd_boolean relocatable,
7912                                             asymbol **symbols)
7913 {
7914   bfd *input_bfd = link_order->u.indirect.section->owner;
7915   asection *input_section = link_order->u.indirect.section;
7916   long reloc_size;
7917   arelent **reloc_vector;
7918   long reloc_count;
7919
7920   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
7921   if (reloc_size < 0)
7922     return NULL;
7923
7924   /* Read in the section.  */
7925   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
7926     return NULL;
7927
7928   if (reloc_size == 0)
7929     return data;
7930
7931   reloc_vector = (arelent **) bfd_malloc (reloc_size);
7932   if (reloc_vector == NULL)
7933     return NULL;
7934
7935   reloc_count = bfd_canonicalize_reloc (input_bfd,
7936                                         input_section,
7937                                         reloc_vector,
7938                                         symbols);
7939   if (reloc_count < 0)
7940     goto error_return;
7941
7942   if (reloc_count > 0)
7943     {
7944       arelent **parent;
7945
7946       for (parent = reloc_vector; *parent != NULL; parent++)
7947         {
7948           char *error_message = NULL;
7949           asymbol *symbol;
7950           bfd_reloc_status_type r;
7951
7952           symbol = *(*parent)->sym_ptr_ptr;
7953           /* PR ld/19628: A specially crafted input file
7954              can result in a NULL symbol pointer here.  */
7955           if (symbol == NULL)
7956             {
7957               link_info->callbacks->einfo
7958                 (_("%X%P: %B(%A): error: relocation for offset %V has no value\n"),
7959                  abfd, input_section, (* parent)->address);
7960               goto error_return;
7961             }
7962
7963           if (symbol->section && discarded_section (symbol->section))
7964             {
7965               bfd_byte *p;
7966               static reloc_howto_type none_howto
7967                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
7968                          "unused", FALSE, 0, 0, FALSE);
7969
7970               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
7971               _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
7972                                    p);
7973               (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
7974               (*parent)->addend = 0;
7975               (*parent)->howto = &none_howto;
7976               r = bfd_reloc_ok;
7977             }
7978           else
7979             r = bfd_perform_relocation (input_bfd,
7980                                         *parent,
7981                                         data,
7982                                         input_section,
7983                                         relocatable ? abfd : NULL,
7984                                         &error_message);
7985
7986           if (relocatable)
7987             {
7988               asection *os = input_section->output_section;
7989
7990               /* A partial link, so keep the relocs.  */
7991               os->orelocation[os->reloc_count] = *parent;
7992               os->reloc_count++;
7993             }
7994
7995           if (r != bfd_reloc_ok)
7996             {
7997               switch (r)
7998                 {
7999                 case bfd_reloc_undefined:
8000                   if (!((*link_info->callbacks->undefined_symbol)
8001                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8002                          input_bfd, input_section, (*parent)->address,
8003                          TRUE)))
8004                     goto error_return;
8005                   break;
8006                 case bfd_reloc_dangerous:
8007                   BFD_ASSERT (error_message != NULL);
8008                   if (!((*link_info->callbacks->reloc_dangerous)
8009                         (link_info, error_message, input_bfd, input_section,
8010                          (*parent)->address)))
8011                     goto error_return;
8012                   break;
8013                 case bfd_reloc_overflow:
8014                   if (!((*link_info->callbacks->reloc_overflow)
8015                         (link_info, NULL,
8016                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8017                          (*parent)->howto->name, (*parent)->addend,
8018                          input_bfd, input_section, (*parent)->address)))
8019                     goto error_return;
8020                   break;
8021                 case bfd_reloc_outofrange:
8022                   /* PR ld/13730:
8023                      This error can result when processing some partially
8024                      complete binaries.  Do not abort, but issue an error
8025                      message instead.  */
8026                   link_info->callbacks->einfo
8027                     (_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
8028                      abfd, input_section, * parent);
8029                   goto error_return;
8030
8031                 case bfd_reloc_notsupported:
8032                   /* PR ld/17512
8033                      This error can result when processing a corrupt binary.
8034                      Do not abort.  Issue an error message instead.  */
8035                   link_info->callbacks->einfo
8036                     (_("%X%P: %B(%A): relocation \"%R\" is not supported\n"),
8037                      abfd, input_section, * parent);
8038                   goto error_return;
8039
8040                 default:
8041                   /* PR 17512; file: 90c2a92e.
8042                      Report unexpected results, without aborting.  */
8043                   link_info->callbacks->einfo
8044                     (_("%X%P: %B(%A): relocation \"%R\" returns an unrecognized value %x\n"),
8045                      abfd, input_section, * parent, r);
8046                   break;
8047                 }
8048
8049             }
8050         }
8051     }
8052
8053   free (reloc_vector);
8054   return data;
8055
8056 error_return:
8057   free (reloc_vector);
8058   return NULL;
8059 }