binutils/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2
   3 AUTOMAKE_OPTIONS = dejagnu no-dist foreign
   4 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
   5
   6 SUBDIRS = doc po
   7
   8 tooldir = $(exec_prefix)/$(target_alias)
   9
  10 ## These aren't set by automake, because they appear in
  11 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
  12 ## thus is not seen by automake.
  13 CC_FOR_BUILD = @CC_FOR_BUILD@
  14 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
  15
  16 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
  17 YFLAGS = -d
  18 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
  19
  20 # Automake 1.10+ disables lex and yacc output file regeneration if
  21 # maintainer mode is disabled.  Avoid this.
  22 am__skiplex =
  23 am__skipyacc =
  24
  25 WARN_CFLAGS = @WARN_CFLAGS@
  26 NO_WERROR = @NO_WERROR@
  27 AM_CFLAGS = $(WARN_CFLAGS)
  28 LIBICONV = @LIBICONV@
  29
  30 # these two are almost the same program
  31 AR_PROG=ar
  32 RANLIB_PROG=ranlib
  33
  34 # objcopy and strip should be the same program
  35 OBJCOPY_PROG=objcopy
  36 STRIP_PROG=strip-new
  37
  38 STRINGS_PROG=strings
  39
  40 READELF_PROG=readelf
  41
  42 ELFEDIT_PROG=elfedit
  43
  44 # These should all be the same program too.
  45 SIZE_PROG=size
  46 NM_PROG=nm-new
  47 OBJDUMP_PROG=objdump
  48
  49 # This is the demangler, as a standalone program.
  50 # Note: This one is used as the installed name too, unlike the above.
  51 DEMANGLER_PROG=cxxfilt
  52
  53 ADDR2LINE_PROG=addr2line
  54
  55 NLMCONV_PROG=nlmconv
  56 DLLTOOL_PROG=dlltool
  57 WINDRES_PROG=windres
  58 WINDMC_PROG=windmc
  59 DLLWRAP_PROG=dllwrap
  60
  61 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
  62
  63 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
  64
  65 bin_SCRIPTS = @BUILD_INSTALL_MISC@
  66 EXTRA_SCRIPTS = embedspu
  67
  68 ## Test programs.
  69 BFDTEST1_PROG = bfdtest1
  70 BFDTEST2_PROG = bfdtest2
  71
  72 TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG)
  73
  74 ## We need a special rule to install the programs which are built with
  75 ## -new, and to rename cxxfilt to c++filt.
  76 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
  77 noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@
  78
  79 EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
  80
  81 # Stuff that goes in tooldir/ if appropriate.
  82 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy
  83
  84 BASEDIR = $(srcdir)/..
  85 BFDDIR = $(BASEDIR)/bfd
  86 INCDIR  = $(BASEDIR)/include
  87
  88 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
  89          @HDEFINES@ \
  90          @INCINTL@ \
  91          -DLOCALEDIR="\"$(datadir)/locale\"" \
  92          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
  93
  94 HFILES = \
  95         arsup.h binemul.h bucomm.h budbg.h \
  96         coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h nlmconv.h \
  97         objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
  98         windmc.h
  99
 100 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
 101 BUILT_SOURCES = $(GENERATED_HFILES)
 102
 103 CFILES = \
 104         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
 105         coffdump.c coffgrok.c cxxfilt.c \
 106         dwarf.c debug.c dlltool.c dllwrap.c \
 107         elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
 108         ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
 109         nlmconv.c nm.c not-ranlib.c not-strip.c \
 110         objcopy.c objdump.c prdbg.c \
 111         od-xcoff.c od-macho.c \
 112         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
 113         resbin.c rescoff.c resrc.c resres.c \
 114         size.c srconv.c stabs.c strings.c sysdump.c \
 115         syslex_wrap.c unwind-ia64.c elfedit.c version.c \
 116         windres.c winduni.c wrstabs.c \
 117         windmc.c mclex.c
 118
 119 GENERATED_CFILES = \
 120         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
 121         defparse.c deflex.c nlmheader.c rcparse.c mcparse.c
 122
 123 DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
 124 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
 125
 126 # Extra object files for objdump
 127 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
 128
 129 # Code shared by all the binutils.
 130 BULIBS = bucomm.c version.c filemode.c
 131
 132 # Code shared by the ELF related programs.
 133 ELFLIBS = elfcomm.c
 134
 135 BFDLIB = ../bfd/libbfd.la
 136
 137 OPCODES = ../opcodes/libopcodes.la
 138
 139 LIBIBERTY = ../libiberty/libiberty.a
 140
 141 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 142 po/POTFILES.in: @MAINT@ Makefile
 143         for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 144           && mv tmp $(srcdir)/po/POTFILES.in
 145
 146 EXPECT = expect
 147 RUNTEST = runtest
 148
 149 CC_FOR_TARGET = ` \
 150   if [ -f $$r/../gcc/xgcc ] ; then \
 151     if [ -f $$r/../newlib/Makefile ] ; then \
 152       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
 153     else \
 154       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
 155     fi; \
 156   else \
 157     if [ "@host@" = "@target@" ] ; then \
 158       echo $(CC); \
 159     else \
 160       echo gcc | sed '$(transform)'; \
 161     fi; \
 162   fi`
 163
 164 check-DEJAGNU: site.exp
 165         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
 166         r=`pwd`; export r; \
 167         LC_ALL=C; export LC_ALL; \
 168         EXPECT=$(EXPECT); export EXPECT; \
 169         runtest=$(RUNTEST); \
 170         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
 171           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
 172                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
 173                         $(RUNTESTFLAGS); \
 174         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
 175         fi
 176
 177 installcheck-local:
 178         /bin/sh $(srcdir)/sanity.sh $(bindir)
 179
 180 # There's no global DEPENDENCIES.  So, we must explicitly list everything
 181 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
 182 # non-empty until configure time.  Ugh!
 183 size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 184 objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(OBJDUMP_PRIVATE_OFILES)
 185 nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 186 ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 187 strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 188 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 189 ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 190 cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 191 objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 192 nlmconv_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 193 srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 194 sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 195 coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 196 dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 197 windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 198 windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 199 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 200 readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 201 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
 202 dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 203 bfdtest1_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 204 bfdtest2_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 205
 206 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 207
 208 size_SOURCES = size.c $(BULIBS)
 209
 210 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 211
 212 strings_SOURCES = strings.c $(BULIBS)
 213
 214 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
 215 readelf_LDADD   = $(LIBINTL) $(LIBIBERTY)
 216
 217 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
 218 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
 219
 220 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 221
 222 nm_new_SOURCES = nm.c $(BULIBS)
 223
 224 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
 225 EXTRA_objdump_SOURCES = od-xcoff.c
 226 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 227
 228 objdump.@OBJEXT@:objdump.c
 229 if am__fastdepCC
 230         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 231         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 232 else
 233 if AMDEP
 234         source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
 235         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 236 endif
 237         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 238 endif
 239
 240 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
 241
 242 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
 243         emul_$(EMULATION).c $(BULIBS)
 244 EXTRA_ar_SOURCES = $(CFILES)
 245 ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 246
 247 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
 248         binemul.c emul_$(EMULATION).c $(BULIBS)
 249 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 250
 251 addr2line_SOURCES = addr2line.c $(BULIBS)
 252
 253 # The following is commented out for the conversion to automake.
 254 # This rule creates a single binary that switches between ar and ranlib
 255 # by looking at argv[0].  Use this kludge to save some disk space.
 256 # However, you have to install things by hand.
 257 # (That is after 'make install', replace the installed ranlib by a link to ar.)
 258 # Alternatively, you can install ranlib.sh as ranlib.
 259 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
 260 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
 261 #       -rm -f $(RANLIB_PROG)
 262 #       -ln $(AR_PROG) $(RANLIB_PROG)
 263 #
 264 # objcopy and strip in one binary that uses argv[0] to decide its action.
 265 #
 266 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
 267 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
 268 #       -rm -f $(STRIP_PROG)
 269 #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
 270
 271 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 272         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
 273         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
 274         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
 275
 276 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 277         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
 278
 279 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 280         $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 281
 282 syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
 283         $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
 284
 285 sysinfo.@OBJEXT@: sysinfo.c
 286         if [ -r sysinfo.c ]; then \
 287           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
 288         else \
 289           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
 290         fi
 291
 292 bin2c$(EXEEXT_FOR_BUILD): bin2c.c
 293         $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
 294
 295 embedspu: embedspu.sh Makefile
 296         awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
 297         chmod a+x $@
 298
 299 # We need these for parallel make.
 300 sysinfo.h: sysinfo.c
 301
 302 # Disable -Werror, if it has been enabled, since old versions of bison/
 303 # yacc will produce working code which contain compile time warnings.
 304 arparse.@OBJEXT@: arparse.c
 305 if am__fastdepCC
 306         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 307         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 308 else
 309 if AMDEP
 310         source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 311         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 312 endif
 313         $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 314 endif
 315
 316 arlex.@OBJEXT@: arlex.c
 317 if am__fastdepCC
 318         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 319         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 320 else
 321 if AMDEP
 322         source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 323         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 324 endif
 325         $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 326 endif
 327
 328 sysroff.@OBJEXT@: sysroff.c
 329 if am__fastdepCC
 330         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 331         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 332 else
 333 if AMDEP
 334         source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 335         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 336 endif
 337         $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 338 endif
 339
 340 defparse.@OBJEXT@: defparse.c
 341 if am__fastdepCC
 342         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 343         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 344 else
 345 if AMDEP
 346         source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 347         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 348 endif
 349         $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 350 endif
 351
 352 deflex.@OBJEXT@: deflex.c
 353 if am__fastdepCC
 354         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 355         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 356 else
 357 if AMDEP
 358         source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 359         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 360 endif
 361         $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 362 endif
 363
 364 nlmheader.@OBJEXT@: nlmheader.c
 365 if am__fastdepCC
 366         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 367         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 368 else
 369 if AMDEP
 370         source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@
 371         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 372 endif
 373         $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 374 endif
 375
 376 rcparse.@OBJEXT@: rcparse.c
 377 if am__fastdepCC
 378         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 379         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 380 else
 381 if AMDEP
 382         source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 383         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 384 endif
 385         $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 386 endif
 387
 388 mcparse.@OBJEXT@: mcparse.c
 389 if am__fastdepCC
 390         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 391         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 392 else
 393 if AMDEP
 394         source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 395         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 396 endif
 397         $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 398 endif
 399
 400 rclex.@OBJEXT@: rclex.c
 401 if am__fastdepCC
 402         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
 403         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 404 else
 405 if AMDEP
 406         source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 407         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 408 endif
 409         $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
 410 endif
 411
 412 mclex.@OBJEXT@: mclex.c
 413 if am__fastdepCC
 414         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
 415         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 416 else
 417 if AMDEP
 418         source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 419         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 420 endif
 421         $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
 422 endif
 423
 424 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
 425 srconv.@OBJEXT@: sysroff.c
 426
 427 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
 428 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 429
 430 dlltool.@OBJEXT@:
 431 if am__fastdepCC
 432         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 433         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 434 else
 435 if AMDEP
 436         source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
 437         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 438 endif
 439         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 440 endif
 441
 442 rescoff.@OBJEXT@:
 443 if am__fastdepCC
 444         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 445         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 446 else
 447 if AMDEP
 448         source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 449         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 450 endif
 451         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 452 endif
 453
 454 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
 455
 456 sysdump_SOURCES = sysdump.c $(BULIBS)
 457 sysdump.@OBJEXT@: sysroff.c
 458
 459 # coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
 460 # scripts, since they are only included conditionally.
 461 nlmconv.@OBJEXT@: nlmconv.c
 462 if am__fastdepCC
 463         ldname=`echo ld | sed '$(transform)'`; \
 464         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \
 465           -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 466         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 467 else
 468 if AMDEP
 469         source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@
 470         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 471 endif
 472         ldname=`echo ld | sed '$(transform)'`; \
 473         $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 474 endif
 475
 476 nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
 477
 478 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
 479         winduni.c resres.c $(BULIBS)
 480 windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 481
 482 windmc_SOURCES = windmc.c mcparse.y mclex.c \
 483         winduni.c $(BULIBS)
 484 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 485
 486 dllwrap_SOURCES = dllwrap.c version.c
 487 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
 488
 489
 490 EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
 491         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
 492         mcparse.h mcparse.c embedspu.sh
 493
 494 diststuff: $(EXTRA_DIST) info
 495 all: info
 496
 497 # We extract version from bfd/configure.in, make sure to rerun configure
 498 # when BFD's version changes.
 499 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
 500
 501 DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak embedspu
 502
 503 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
 504   binutils.log binutils.sum abcdefgh*
 505 mostlyclean-local:
 506         -rm -rf tmpdir
 507
 508 .PHONY: install-exec-local
 509
 510 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
 511         @list='$(RENAMED_PROGS)'; for p in $$list; do \
 512           if test -f $$p$(EXEEXT); then \
 513             echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
 514             $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
 515           else :; fi; \
 516         done
 517         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
 518         for i in $(TOOL_PROGS); do \
 519           if [ -f $$i$(EXEEXT) ]; then \
 520             j=`echo $$i | sed -e 's/-new//'`; \
 521             k=`echo $$j | sed '$(transform)'`; \
 522             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
 523               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 524               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
 525                 || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 526             fi; \
 527           else true; \
 528           fi; \
 529         done