drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers (libata)"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         ---help---
  20           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  21           any other ATA device under Linux, say Y and make sure that you know
  22           the name of your ATA host adapter (the card inside your computer
  23           that "speaks" the ATA protocol, also called ATA controller),
  24           because you will be asked for it.
  25
  26           NOTE: ATA enables basic SCSI support; *however*,
  27           'SCSI disk support', 'SCSI tape support', or
  28           'SCSI CDROM support' may also be needed,
  29           depending on your hardware configuration.
  30
  31 if ATA
  32
  33 config ATA_NONSTANDARD
  34        bool
  35        default n
  36
  37 config ATA_VERBOSE_ERROR
  38         bool "Verbose ATA error reporting"
  39         default y
  40         help
  41           This option adds parsing of ATA command descriptions and error bits
  42           in libata kernel output, making it easier to interpret.
  43           This option will enlarge the kernel by approx. 6KB. Disable it only
  44           if kernel size is more important than ease of debugging.
  45
  46           If unsure, say Y.
  47
  48 config ATA_ACPI
  49         bool "ATA ACPI Support"
  50         depends on ACPI && PCI
  51         default y
  52         help
  53           This option adds support for ATA-related ACPI objects.
  54           These ACPI objects add the ability to retrieve taskfiles
  55           from the ACPI BIOS and write them to the disk controller.
  56           These objects may be related to performance, security,
  57           power management, or other areas.
  58           You can disable this at kernel boot time by using the
  59           option libata.noacpi=1
  60
  61 config SATA_ZPODD
  62         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  63         depends on ATA_ACPI && PM_RUNTIME
  64         default n
  65         help
  66           This option adds support for SATA Zero Power Optical Disc
  67           Drive (ZPODD). It requires both the ODD and the platform
  68           support, and if enabled, will automatically power on/off the
  69           ODD when certain condition is satisfied. This does not impact
  70           end user's experience of the ODD, only power is saved when
  71           the ODD is not in use (i.e. no disc inside).
  72
  73           If unsure, say N.
  74
  75 config SATA_PMP
  76         bool "SATA Port Multiplier support"
  77         default y
  78         help
  79           This option adds support for SATA Port Multipliers
  80           (the SATA version of an ethernet hub, or SAS expander).
  81
  82 comment "Controllers with non-SFF native interface"
  83
  84 config SATA_AHCI
  85         tristate "AHCI SATA support"
  86         depends on PCI
  87         help
  88           This option enables support for AHCI Serial ATA.
  89
  90           If unsure, say N.
  91
  92 config SATA_AHCI_PLATFORM
  93         tristate "Platform AHCI SATA support"
  94         help
  95           This option enables support for Platform AHCI Serial ATA
  96           controllers.
  97
  98           If unsure, say N.
  99
 100 config AHCI_ST
 101         tristate "ST AHCI SATA support"
 102         depends on SATA_AHCI_PLATFORM
 103         depends on ARCH_STI
 104         help
 105           This option enables support for ST AHCI SATA controller.
 106
 107           If unsure, say N.
 108
 109 config AHCI_IMX
 110         tristate "Freescale i.MX AHCI SATA support"
 111         depends on SATA_AHCI_PLATFORM && MFD_SYSCON
 112         help
 113           This option enables support for the Freescale i.MX SoC's
 114           onboard AHCI SATA.
 115
 116           If unsure, say N.
 117
 118 config AHCI_SUNXI
 119         tristate "Allwinner sunxi AHCI SATA support"
 120         depends on ARCH_SUNXI && SATA_AHCI_PLATFORM
 121         help
 122           This option enables support for the Allwinner sunxi SoC's
 123           onboard AHCI SATA.
 124
 125           If unsure, say N.
 126
 127 config SATA_FSL
 128         tristate "Freescale 3.0Gbps SATA support"
 129         depends on FSL_SOC
 130         help
 131           This option enables support for Freescale 3.0Gbps SATA controller.
 132           It can be found on MPC837x and MPC8315.
 133
 134           If unsure, say N.
 135
 136 config SATA_INIC162X
 137         tristate "Initio 162x SATA support (Very Experimental)"
 138         depends on PCI
 139         help
 140           This option enables support for Initio 162x Serial ATA.
 141
 142 config SATA_ACARD_AHCI
 143         tristate "ACard AHCI variant (ATP 8620)"
 144         depends on PCI
 145         help
 146           This option enables support for Acard.
 147
 148           If unsure, say N.
 149
 150 config SATA_SIL24
 151         tristate "Silicon Image 3124/3132 SATA support"
 152         depends on PCI
 153         help
 154           This option enables support for Silicon Image 3124/3132 Serial ATA.
 155
 156           If unsure, say N.
 157
 158 config ATA_SFF
 159         bool "ATA SFF support (for legacy IDE and PATA)"
 160         default y
 161         help
 162           This option adds support for ATA controllers with SFF
 163           compliant or similar programming interface.
 164
 165           SFF is the legacy IDE interface that has been around since
 166           the dawn of time.  Almost all PATA controllers have an
 167           SFF interface.  Many SATA controllers have an SFF interface
 168           when configured into a legacy compatibility mode.
 169
 170           For users with exclusively modern controllers like AHCI,
 171           Silicon Image 3124, or Marvell 6440, you may choose to
 172           disable this unneeded SFF support.
 173
 174           If unsure, say Y.
 175
 176 if ATA_SFF
 177
 178 comment "SFF controllers with custom DMA interface"
 179
 180 config PDC_ADMA
 181         tristate "Pacific Digital ADMA support"
 182         depends on PCI
 183         help
 184           This option enables support for Pacific Digital ADMA controllers
 185
 186           If unsure, say N.
 187
 188 config PATA_OCTEON_CF
 189         tristate "OCTEON Boot Bus Compact Flash support"
 190         depends on CAVIUM_OCTEON_SOC
 191         help
 192           This option enables a polled compact flash driver for use with
 193           compact flash cards attached to the OCTEON boot bus.
 194
 195           If unsure, say N.
 196
 197 config SATA_QSTOR
 198         tristate "Pacific Digital SATA QStor support"
 199         depends on PCI
 200         help
 201           This option enables support for Pacific Digital Serial ATA QStor.
 202
 203           If unsure, say N.
 204
 205 config SATA_SX4
 206         tristate "Promise SATA SX4 support (Experimental)"
 207         depends on PCI
 208         help
 209           This option enables support for Promise Serial ATA SX4.
 210
 211           If unsure, say N.
 212
 213 config ATA_BMDMA
 214         bool "ATA BMDMA support"
 215         default y
 216         help
 217           This option adds support for SFF ATA controllers with BMDMA
 218           capability.  BMDMA stands for bus-master DMA and is the
 219           de facto DMA interface for SFF controllers.
 220
 221           If unsure, say Y.
 222
 223 if ATA_BMDMA
 224
 225 comment "SATA SFF controllers with BMDMA"
 226
 227 config ATA_PIIX
 228         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 229         depends on PCI
 230         help
 231           This option enables support for ICH5/6/7/8 Serial ATA
 232           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 233           host controllers.
 234
 235           If unsure, say N.
 236
 237 config SATA_DWC
 238         tristate "DesignWare Cores SATA support"
 239         depends on 460EX
 240         help
 241           This option enables support for the on-chip SATA controller of the
 242           AppliedMicro processor 460EX.
 243
 244           If unsure, say N.
 245
 246 config SATA_DWC_DEBUG
 247         bool "Debugging driver version"
 248         depends on SATA_DWC
 249         help
 250           This option enables debugging output in the driver.
 251
 252 config SATA_DWC_VDEBUG
 253         bool "Verbose debug output"
 254         depends on SATA_DWC_DEBUG
 255         help
 256           This option enables the taskfile dumping and NCQ debugging.
 257
 258 config SATA_HIGHBANK
 259         tristate "Calxeda Highbank SATA support"
 260         help
 261           This option enables support for the Calxeda Highbank SoC's
 262           onboard SATA.
 263
 264           If unsure, say N.
 265
 266 config SATA_MV
 267         tristate "Marvell SATA support"
 268         help
 269           This option enables support for the Marvell Serial ATA family.
 270           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 271           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 272
 273           If unsure, say N.
 274
 275 config SATA_NV
 276         tristate "NVIDIA SATA support"
 277         depends on PCI
 278         help
 279           This option enables support for NVIDIA Serial ATA.
 280
 281           If unsure, say N.
 282
 283 config SATA_PROMISE
 284         tristate "Promise SATA TX2/TX4 support"
 285         depends on PCI
 286         help
 287           This option enables support for Promise Serial ATA TX2/TX4.
 288
 289           If unsure, say N.
 290
 291 config SATA_RCAR
 292         tristate "Renesas R-Car SATA support"
 293         help
 294           This option enables support for Renesas R-Car Serial ATA.
 295
 296           If unsure, say N.
 297
 298 config SATA_SIL
 299         tristate "Silicon Image SATA support"
 300         depends on PCI
 301         help
 302           This option enables support for Silicon Image Serial ATA.
 303
 304           If unsure, say N.
 305
 306 config SATA_SIS
 307         tristate "SiS 964/965/966/180 SATA support"
 308         depends on PCI
 309         select PATA_SIS
 310         help
 311           This option enables support for SiS Serial ATA on
 312           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 313           The PATA support for SiS 180 requires additionally to
 314           enable the PATA_SIS driver in the config.
 315           If unsure, say N.
 316
 317 config SATA_SVW
 318         tristate "ServerWorks Frodo / Apple K2 SATA support"
 319         depends on PCI
 320         help
 321           This option enables support for Broadcom/Serverworks/Apple K2
 322           SATA support.
 323
 324           If unsure, say N.
 325
 326 config SATA_ULI
 327         tristate "ULi Electronics SATA support"
 328         depends on PCI
 329         help
 330           This option enables support for ULi Electronics SATA.
 331
 332           If unsure, say N.
 333
 334 config SATA_VIA
 335         tristate "VIA SATA support"
 336         depends on PCI
 337         help
 338           This option enables support for VIA Serial ATA.
 339
 340           If unsure, say N.
 341
 342 config SATA_VITESSE
 343         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 344         depends on PCI
 345         help
 346           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 347
 348           If unsure, say N.
 349
 350 comment "PATA SFF controllers with BMDMA"
 351
 352 config PATA_ALI
 353         tristate "ALi PATA support"
 354         depends on PCI
 355         help
 356           This option enables support for the ALi ATA interfaces
 357           found on the many ALi chipsets.
 358
 359           If unsure, say N.
 360
 361 config PATA_AMD
 362         tristate "AMD/NVidia PATA support"
 363         depends on PCI
 364         help
 365           This option enables support for the AMD and NVidia PATA
 366           interfaces found on the chipsets for Athlon/Athlon64.
 367
 368           If unsure, say N.
 369
 370 config PATA_ARASAN_CF
 371         tristate "ARASAN CompactFlash PATA Controller Support"
 372         depends on DMADEVICES
 373         select DMA_ENGINE
 374         help
 375           Say Y here to support the ARASAN CompactFlash PATA controller
 376
 377 config PATA_ARTOP
 378         tristate "ARTOP 6210/6260 PATA support"
 379         depends on PCI
 380         help
 381           This option enables support for ARTOP PATA controllers.
 382
 383           If unsure, say N.
 384
 385 config PATA_ATIIXP
 386         tristate "ATI PATA support"
 387         depends on PCI
 388         help
 389           This option enables support for the ATI ATA interfaces
 390           found on the many ATI chipsets.
 391
 392           If unsure, say N.
 393
 394 config PATA_ATP867X
 395         tristate "ARTOP/Acard ATP867X PATA support"
 396         depends on PCI
 397         help
 398           This option enables support for ARTOP/Acard ATP867X PATA
 399           controllers.
 400
 401           If unsure, say N.
 402
 403 config PATA_BF54X
 404         tristate "Blackfin 54x ATAPI support"
 405         depends on BF542 || BF548 || BF549
 406         help
 407           This option enables support for the built-in ATAPI controller on
 408           Blackfin 54x family chips.
 409
 410           If unsure, say N.
 411
 412 config PATA_CMD64X
 413         tristate "CMD64x PATA support"
 414         depends on PCI
 415         help
 416           This option enables support for the CMD64x series chips
 417           except for the CMD640.
 418
 419           If unsure, say N.
 420
 421 config PATA_CS5520
 422         tristate "CS5510/5520 PATA support"
 423         depends on PCI && (X86_32 || COMPILE_TEST)
 424         help
 425           This option enables support for the Cyrix 5510/5520
 426           companion chip used with the MediaGX/Geode processor family.
 427
 428           If unsure, say N.
 429
 430 config PATA_CS5530
 431         tristate "CS5530 PATA support"
 432         depends on PCI && (X86_32 || COMPILE_TEST)
 433         help
 434           This option enables support for the Cyrix/NatSemi/AMD CS5530
 435           companion chip used with the MediaGX/Geode processor family.
 436
 437           If unsure, say N.
 438
 439 config PATA_CS5535
 440         tristate "CS5535 PATA support (Experimental)"
 441         depends on PCI && X86_32
 442         help
 443           This option enables support for the NatSemi/AMD CS5535
 444           companion chip used with the Geode processor family.
 445
 446           If unsure, say N.
 447
 448 config PATA_CS5536
 449         tristate "CS5536 PATA support"
 450         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 451         help
 452           This option enables support for the AMD CS5536
 453           companion chip used with the Geode LX processor family.
 454
 455           If unsure, say N.
 456
 457 config PATA_CYPRESS
 458         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 459         depends on PCI
 460         help
 461           This option enables support for the Cypress/Contaq CY82C693
 462           chipset found in some Alpha systems
 463
 464           If unsure, say N.
 465
 466 config PATA_EFAR
 467         tristate "EFAR SLC90E66 support"
 468         depends on PCI
 469         help
 470           This option enables support for the EFAR SLC90E66
 471           IDE controller found on some older machines.
 472
 473           If unsure, say N.
 474
 475 config PATA_EP93XX
 476         tristate "Cirrus Logic EP93xx PATA support"
 477         depends on ARCH_EP93XX
 478         help
 479           This option enables support for the PATA controller in
 480           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 481
 482           If unsure, say N.
 483
 484 config PATA_HPT366
 485         tristate "HPT 366/368 PATA support"
 486         depends on PCI
 487         help
 488           This option enables support for the HPT 366 and 368
 489           PATA controllers via the new ATA layer.
 490
 491           If unsure, say N.
 492
 493 config PATA_HPT37X
 494         tristate "HPT 370/370A/371/372/374/302 PATA support"
 495         depends on PCI
 496         help
 497           This option enables support for the majority of the later HPT
 498           PATA controllers via the new ATA layer.
 499
 500           If unsure, say N.
 501
 502 config PATA_HPT3X2N
 503         tristate "HPT 371N/372N/302N PATA support"
 504         depends on PCI
 505         help
 506           This option enables support for the N variant HPT PATA
 507           controllers via the new ATA layer.
 508
 509           If unsure, say N.
 510
 511 config PATA_HPT3X3
 512         tristate "HPT 343/363 PATA support"
 513         depends on PCI
 514         help
 515           This option enables support for the HPT 343/363
 516           PATA controllers via the new ATA layer
 517
 518           If unsure, say N.
 519
 520 config PATA_HPT3X3_DMA
 521         bool "HPT 343/363 DMA support"
 522         depends on PATA_HPT3X3
 523         help
 524           This option enables DMA support for the HPT343/363
 525           controllers. Enable with care as there are still some
 526           problems with DMA on this chipset.
 527
 528 config PATA_ICSIDE
 529         tristate "Acorn ICS PATA support"
 530         depends on ARM && ARCH_ACORN
 531         help
 532           On Acorn systems, say Y here if you wish to use the ICS PATA
 533           interface card.  This is not required for ICS partition support.
 534           If you are unsure, say N to this.
 535
 536 config PATA_IMX
 537         tristate "PATA support for Freescale iMX"
 538         depends on ARCH_MXC
 539         help
 540           This option enables support for the PATA host available on Freescale
 541           iMX SoCs.
 542
 543           If unsure, say N.
 544
 545 config PATA_IT8213
 546         tristate "IT8213 PATA support (Experimental)"
 547         depends on PCI
 548         help
 549           This option enables support for the ITE 821 PATA
 550           controllers via the new ATA layer.
 551
 552           If unsure, say N.
 553
 554 config PATA_IT821X
 555         tristate "IT8211/2 PATA support"
 556         depends on PCI
 557         help
 558           This option enables support for the ITE 8211 and 8212
 559           PATA controllers via the new ATA layer, including RAID
 560           mode.
 561
 562           If unsure, say N.
 563
 564 config PATA_JMICRON
 565         tristate "JMicron PATA support"
 566         depends on PCI
 567         help
 568           Enable support for the JMicron IDE controller, via the new
 569           ATA layer.
 570
 571           If unsure, say N.
 572
 573 config PATA_MACIO
 574         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 575         depends on PPC_PMAC
 576         help
 577           Most IDE capable PowerMacs have IDE busses driven by a variant
 578           of this controller which is part of the Apple chipset used on
 579           most PowerMac models. Some models have multiple busses using
 580           different chipsets, though generally, MacIO is one of them.
 581
 582 config PATA_MARVELL
 583         tristate "Marvell PATA support via legacy mode"
 584         depends on PCI
 585         help
 586           This option enables limited support for the Marvell 88SE61xx ATA
 587           controllers. If you wish to use only the SATA ports then select
 588           the AHCI driver alone. If you wish to the use the PATA port or
 589           both SATA and PATA include this driver.
 590
 591           If unsure, say N.
 592
 593 config PATA_MPC52xx
 594         tristate "Freescale MPC52xx SoC internal IDE"
 595         depends on PPC_MPC52xx && PPC_BESTCOMM
 596         select PPC_BESTCOMM_ATA
 597         help
 598           This option enables support for integrated IDE controller
 599           of the Freescale MPC52xx SoC.
 600
 601           If unsure, say N.
 602
 603 config PATA_NETCELL
 604         tristate "NETCELL Revolution RAID support"
 605         depends on PCI
 606         help
 607           This option enables support for the Netcell Revolution RAID
 608           PATA controller.
 609
 610           If unsure, say N.
 611
 612 config PATA_NINJA32
 613         tristate "Ninja32/Delkin Cardbus ATA support"
 614         depends on PCI
 615         help
 616           This option enables support for the Ninja32, Delkin and
 617           possibly other brands of Cardbus ATA adapter
 618
 619           If unsure, say N.
 620
 621 config PATA_NS87415
 622         tristate "Nat Semi NS87415 PATA support"
 623         depends on PCI
 624         help
 625           This option enables support for the National Semiconductor
 626           NS87415 PCI-IDE controller.
 627
 628           If unsure, say N.
 629
 630 config PATA_OLDPIIX
 631         tristate "Intel PATA old PIIX support"
 632         depends on PCI
 633         help
 634           This option enables support for early PIIX PATA support.
 635
 636           If unsure, say N.
 637
 638 config PATA_OPTIDMA
 639         tristate "OPTI FireStar PATA support (Very Experimental)"
 640         depends on PCI
 641         help
 642           This option enables DMA/PIO support for the later OPTi
 643           controllers found on some old motherboards and in some
 644           laptops.
 645
 646           If unsure, say N.
 647
 648 config PATA_PDC2027X
 649         tristate "Promise PATA 2027x support"
 650         depends on PCI
 651         help
 652           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 653
 654           If unsure, say N.
 655
 656 config PATA_PDC_OLD
 657         tristate "Older Promise PATA controller support"
 658         depends on PCI
 659         help
 660           This option enables support for the Promise 20246, 20262, 20263,
 661           20265 and 20267 adapters.
 662
 663           If unsure, say N.
 664
 665 config PATA_RADISYS
 666         tristate "RADISYS 82600 PATA support (Experimental)"
 667         depends on PCI
 668         help
 669           This option enables support for the RADISYS 82600
 670           PATA controllers via the new ATA layer
 671
 672           If unsure, say N.
 673
 674 config PATA_RDC
 675         tristate "RDC PATA support"
 676         depends on PCI
 677         help
 678           This option enables basic support for the later RDC PATA controllers
 679           controllers via the new ATA layer. For the RDC 1010, you need to
 680           enable the IT821X driver instead.
 681
 682           If unsure, say N.
 683
 684 config PATA_SC1200
 685         tristate "SC1200 PATA support"
 686         depends on PCI && (X86_32 || COMPILE_TEST)
 687         help
 688           This option enables support for the NatSemi/AMD SC1200 SoC
 689           companion chip used with the Geode processor family.
 690
 691           If unsure, say N.
 692
 693 config PATA_SCC
 694         tristate "Toshiba's Cell Reference Set IDE support"
 695         depends on PCI && PPC_CELLEB
 696         help
 697           This option enables support for the built-in IDE controller on
 698           Toshiba Cell Reference Board.
 699
 700           If unsure, say N.
 701
 702 config PATA_SCH
 703         tristate "Intel SCH PATA support"
 704         depends on PCI
 705         help
 706           This option enables support for Intel SCH PATA on the Intel
 707           SCH (US15W, US15L, UL11L) series host controllers.
 708
 709           If unsure, say N.
 710
 711 config PATA_SERVERWORKS
 712         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 713         depends on PCI
 714         help
 715           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 716           HT1000 PATA controllers, via the new ATA layer.
 717
 718           If unsure, say N.
 719
 720 config PATA_SIL680
 721         tristate "CMD / Silicon Image 680 PATA support"
 722         depends on PCI
 723         help
 724           This option enables support for CMD / Silicon Image 680 PATA.
 725
 726           If unsure, say N.
 727
 728 config PATA_SIS
 729         tristate "SiS PATA support"
 730         depends on PCI
 731         help
 732           This option enables support for SiS PATA controllers
 733
 734           If unsure, say N.
 735
 736 config PATA_TOSHIBA
 737         tristate "Toshiba Piccolo support (Experimental)"
 738         depends on PCI
 739         help
 740           Support for the Toshiba Piccolo controllers. Currently only the
 741           primary channel is supported by this driver.
 742
 743           If unsure, say N.
 744
 745 config PATA_TRIFLEX
 746         tristate "Compaq Triflex PATA support"
 747         depends on PCI
 748         help
 749           Enable support for the Compaq 'Triflex' IDE controller as found
 750           on many Compaq Pentium-Pro systems, via the new ATA layer.
 751
 752           If unsure, say N.
 753
 754 config PATA_VIA
 755         tristate "VIA PATA support"
 756         depends on PCI
 757         help
 758           This option enables support for the VIA PATA interfaces
 759           found on the many VIA chipsets.
 760
 761           If unsure, say N.
 762
 763 config PATA_PXA
 764         tristate "PXA DMA-capable PATA support"
 765         depends on ARCH_PXA
 766         help
 767           This option enables support for harddrive attached to PXA CPU's bus.
 768
 769           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 770                 is not capable of doing MWDMA, use pata_platform instead.
 771
 772           If unsure, say N.
 773
 774 config PATA_WINBOND
 775         tristate "Winbond SL82C105 PATA support"
 776         depends on PCI
 777         help
 778           This option enables support for SL82C105 PATA devices found in the
 779           Netwinder and some other systems
 780
 781           If unsure, say N.
 782
 783 endif # ATA_BMDMA
 784
 785 comment "PIO-only SFF controllers"
 786
 787 config PATA_AT32
 788         tristate "Atmel AVR32 PATA support (Experimental)"
 789         depends on AVR32 && PLATFORM_AT32AP
 790         help
 791           This option enables support for the IDE devices on the
 792           Atmel AT32AP platform.
 793
 794           If unsure, say N.
 795
 796 config PATA_AT91
 797         tristate "PATA support for AT91SAM9260"
 798         depends on ARM && ARCH_AT91
 799         help
 800           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 801
 802           If unsure, say N.
 803
 804 config PATA_CMD640_PCI
 805         tristate "CMD640 PCI PATA support (Experimental)"
 806         depends on PCI
 807         help
 808           This option enables support for the CMD640 PCI IDE
 809           interface chip. Only the primary channel is currently
 810           supported.
 811
 812           If unsure, say N.
 813
 814 config PATA_ISAPNP
 815         tristate "ISA Plug and Play PATA support"
 816         depends on ISAPNP
 817         help
 818           This option enables support for ISA plug & play ATA
 819           controllers such as those found on old soundcards.
 820
 821           If unsure, say N.
 822
 823 config PATA_IXP4XX_CF
 824         tristate "IXP4XX Compact Flash support"
 825         depends on ARCH_IXP4XX
 826         help
 827           This option enables support for a Compact Flash connected on
 828           the ixp4xx expansion bus. This driver had been written for
 829           Loft/Avila boards in mind but can work with others.
 830
 831           If unsure, say N.
 832
 833 config PATA_MPIIX
 834         tristate "Intel PATA MPIIX support"
 835         depends on PCI
 836         help
 837           This option enables support for MPIIX PATA support.
 838
 839           If unsure, say N.
 840
 841 config PATA_NS87410
 842         tristate "Nat Semi NS87410 PATA support"
 843         depends on PCI
 844         help
 845           This option enables support for the National Semiconductor
 846           NS87410 PCI-IDE controller.
 847
 848           If unsure, say N.
 849
 850 config PATA_OPTI
 851         tristate "OPTI621/6215 PATA support (Very Experimental)"
 852         depends on PCI
 853         help
 854           This option enables full PIO support for the early Opti ATA
 855           controllers found on some old motherboards.
 856
 857           If unsure, say N.
 858
 859 config PATA_PALMLD
 860         tristate "Palm LifeDrive PATA support"
 861         depends on MACH_PALMLD
 862         help
 863           This option enables support for Palm LifeDrive's internal ATA
 864           port via the new ATA layer.
 865
 866           If unsure, say N.
 867
 868 config PATA_PCMCIA
 869         tristate "PCMCIA PATA support"
 870         depends on PCMCIA
 871         help
 872           This option enables support for PCMCIA ATA interfaces, including
 873           compact flash card adapters via the new ATA layer.
 874
 875           If unsure, say N.
 876
 877 config PATA_PLATFORM
 878         tristate "Generic platform device PATA support"
 879         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 880         help
 881           This option enables support for generic directly connected ATA
 882           devices commonly found on embedded systems.
 883
 884           If unsure, say N.
 885
 886 config PATA_OF_PLATFORM
 887         tristate "OpenFirmware platform device PATA support"
 888         depends on PATA_PLATFORM && OF
 889         help
 890           This option enables support for generic directly connected ATA
 891           devices commonly found on embedded systems with OpenFirmware
 892           bindings.
 893
 894           If unsure, say N.
 895
 896 config PATA_QDI
 897         tristate "QDI VLB PATA support"
 898         depends on ISA
 899         select PATA_LEGACY
 900         help
 901           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 902
 903 config PATA_RB532
 904         tristate "RouterBoard 532 PATA CompactFlash support"
 905         depends on MIKROTIK_RB532
 906         help
 907           This option enables support for the RouterBoard 532
 908           PATA CompactFlash controller.
 909
 910           If unsure, say N.
 911
 912 config PATA_RZ1000
 913         tristate "PC Tech RZ1000 PATA support"
 914         depends on PCI
 915         help
 916           This option enables basic support for the PC Tech RZ1000/1
 917           PATA controllers via the new ATA layer
 918
 919           If unsure, say N.
 920
 921 config PATA_SAMSUNG_CF
 922         tristate "Samsung SoC PATA support"
 923         depends on SAMSUNG_DEV_IDE
 924         help
 925           This option enables basic support for Samsung's S3C/S5P board
 926           PATA controllers via the new ATA layer
 927
 928           If unsure, say N.
 929
 930 config PATA_WINBOND_VLB
 931         tristate "Winbond W83759A VLB PATA support (Experimental)"
 932         depends on ISA
 933         select PATA_LEGACY
 934         help
 935           Support for the Winbond W83759A controller on Vesa Local Bus
 936           systems.
 937
 938 comment "Generic fallback / legacy drivers"
 939
 940 config PATA_ACPI
 941         tristate "ACPI firmware driver for PATA"
 942         depends on ATA_ACPI && ATA_BMDMA
 943         help
 944           This option enables an ACPI method driver which drives
 945           motherboard PATA controller interfaces through the ACPI
 946           firmware in the BIOS. This driver can sometimes handle
 947           otherwise unsupported hardware.
 948
 949 config ATA_GENERIC
 950         tristate "Generic ATA support"
 951         depends on PCI && ATA_BMDMA
 952         help
 953           This option enables support for generic BIOS configured
 954           ATA controllers via the new ATA layer
 955
 956           If unsure, say N.
 957
 958 config PATA_LEGACY
 959         tristate "Legacy ISA PATA support (Experimental)"
 960         depends on (ISA || PCI)
 961         help
 962           This option enables support for ISA/VLB/PCI bus legacy PATA
 963           ports and allows them to be accessed via the new ATA layer.
 964
 965           If unsure, say N.
 966
 967 endif # ATA_SFF
 968 endif # ATA