drivers/bus/omap_l3_noc.c

   1 /*
   2  * OMAP L3 Interconnect error handling driver
   3  *
   4  * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
   5  *      Santosh Shilimkar <santosh.shilimkar@ti.com>
   6  *      Sricharan <r.sricharan@ti.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  *
  12  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  13  * kind, whether express or implied; without even the implied warranty
  14  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  */
  17 #include <linux/init.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/io.h>
  20 #include <linux/kernel.h>
  21 #include <linux/module.h>
  22 #include <linux/of_device.h>
  23 #include <linux/of.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/slab.h>
  26
  27 #include "omap_l3_noc.h"
  28
  29 /**
  30  * l3_handle_target() - Handle Target specific parse and reporting
  31  * @l3:         pointer to l3 struct
  32  * @base:       base address of clkdm
  33  * @flag_mux:   flagmux corresponding to the event
  34  * @err_src:    error source index of the slave (target)
  35  *
  36  * This does the second part of the error interrupt handling:
  37  *      3) Parse in the slave information
  38  *      4) Print the logged information.
  39  *      5) Add dump stack to provide kernel trace.
  40  *      6) Clear the source if known.
  41  *
  42  * This handles two types of errors:
  43  *      1) Custom errors in L3 :
  44  *              Target like DMM/FW/EMIF generates SRESP=ERR error
  45  *      2) Standard L3 error:
  46  *              - Unsupported CMD.
  47  *                      L3 tries to access target while it is idle
  48  *              - OCP disconnect.
  49  *              - Address hole error:
  50  *                      If DSS/ISS/FDIF/USBHOSTFS access a target where they
  51  *                      do not have connectivity, the error is logged in
  52  *                      their default target which is DMM2.
  53  *
  54  *      On High Secure devices, firewall errors are possible and those
  55  *      can be trapped as well. But the trapping is implemented as part
  56  *      secure software and hence need not be implemented here.
  57  */
  58 static int l3_handle_target(struct omap_l3 *l3, void __iomem *base,
  59                             struct l3_flagmux_data *flag_mux, int err_src)
  60 {
  61         int k;
  62         u32 std_err_main, clear, masterid;
  63         u8 op_code, m_req_info;
  64         void __iomem *l3_targ_base;
  65         void __iomem *l3_targ_stderr, *l3_targ_slvofslsb, *l3_targ_mstaddr;
  66         void __iomem *l3_targ_hdr, *l3_targ_info;
  67         struct l3_target_data *l3_targ_inst;
  68         struct l3_masters_data *master;
  69         char *target_name, *master_name = "UN IDENTIFIED";
  70         char *err_description;
  71         char err_string[30] = { 0 };
  72         char info_string[60] = { 0 };
  73
  74         /* We DONOT expect err_src to go out of bounds */
  75         BUG_ON(err_src > MAX_CLKDM_TARGETS);
  76
  77         if (err_src < flag_mux->num_targ_data) {
  78                 l3_targ_inst = &flag_mux->l3_targ[err_src];
  79                 target_name = l3_targ_inst->name;
  80                 l3_targ_base = base + l3_targ_inst->offset;
  81         } else {
  82                 target_name = L3_TARGET_NOT_SUPPORTED;
  83         }
  84
  85         if (target_name == L3_TARGET_NOT_SUPPORTED)
  86                 return -ENODEV;
  87
  88         /* Read the stderrlog_main_source from clk domain */
  89         l3_targ_stderr = l3_targ_base + L3_TARG_STDERRLOG_MAIN;
  90         l3_targ_slvofslsb = l3_targ_base + L3_TARG_STDERRLOG_SLVOFSLSB;
  91
  92         std_err_main = readl_relaxed(l3_targ_stderr);
  93
  94         switch (std_err_main & CUSTOM_ERROR) {
  95         case STANDARD_ERROR:
  96                 err_description = "Standard";
  97                 snprintf(err_string, sizeof(err_string),
  98                          ": At Address: 0x%08X ",
  99                          readl_relaxed(l3_targ_slvofslsb));
 100
 101                 l3_targ_mstaddr = l3_targ_base + L3_TARG_STDERRLOG_MSTADDR;
 102                 l3_targ_hdr = l3_targ_base + L3_TARG_STDERRLOG_HDR;
 103                 l3_targ_info = l3_targ_base + L3_TARG_STDERRLOG_INFO;
 104                 break;
 105
 106         case CUSTOM_ERROR:
 107                 err_description = "Custom";
 108
 109                 l3_targ_mstaddr = l3_targ_base +
 110                                   L3_TARG_STDERRLOG_CINFO_MSTADDR;
 111                 l3_targ_hdr = l3_targ_base + L3_TARG_STDERRLOG_CINFO_OPCODE;
 112                 l3_targ_info = l3_targ_base + L3_TARG_STDERRLOG_CINFO_INFO;
 113                 break;
 114
 115         default:
 116                 /* Nothing to be handled here as of now */
 117                 return 0;
 118         }
 119
 120         /* STDERRLOG_MSTADDR Stores the NTTP master address. */
 121         masterid = (readl_relaxed(l3_targ_mstaddr) &
 122                     l3->mst_addr_mask) >> __ffs(l3->mst_addr_mask);
 123
 124         for (k = 0, master = l3->l3_masters; k < l3->num_masters;
 125              k++, master++) {
 126                 if (masterid == master->id) {
 127                         master_name = master->name;
 128                         break;
 129                 }
 130         }
 131
 132         op_code = readl_relaxed(l3_targ_hdr) & 0x7;
 133
 134         m_req_info = readl_relaxed(l3_targ_info) & 0xF;
 135         snprintf(info_string, sizeof(info_string),
 136                  ": %s in %s mode during %s access",
 137                  (m_req_info & BIT(0)) ? "Opcode Fetch" : "Data Access",
 138                  (m_req_info & BIT(1)) ? "Supervisor" : "User",
 139                  (m_req_info & BIT(3)) ? "Debug" : "Functional");
 140
 141         WARN(true,
 142              "%s:L3 %s Error: MASTER %s TARGET %s (%s)%s%s\n",
 143              dev_name(l3->dev),
 144              err_description,
 145              master_name, target_name,
 146              l3_transaction_type[op_code],
 147              err_string, info_string);
 148
 149         /* clear the std error log*/
 150         clear = std_err_main | CLEAR_STDERR_LOG;
 151         writel_relaxed(clear, l3_targ_stderr);
 152
 153         return 0;
 154 }
 155
 156 /**
 157  * l3_interrupt_handler() - interrupt handler for l3 events
 158  * @irq:        irq number
 159  * @_l3:        pointer to l3 structure
 160  *
 161  * Interrupt Handler for L3 error detection.
 162  *      1) Identify the L3 clockdomain partition to which the error belongs to.
 163  *      2) Identify the slave where the error information is logged
 164  *      ... handle the slave event..
 165  *      7) if the slave is unknown, mask out the slave.
 166  */
 167 static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
 168 {
 169         struct omap_l3 *l3 = _l3;
 170         int inttype, i, ret;
 171         int err_src = 0;
 172         u32 err_reg, mask_val;
 173         void __iomem *base, *mask_reg;
 174         struct l3_flagmux_data *flag_mux;
 175
 176         /* Get the Type of interrupt */
 177         inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
 178
 179         for (i = 0; i < l3->num_modules; i++) {
 180                 /*
 181                  * Read the regerr register of the clock domain
 182                  * to determine the source
 183                  */
 184                 base = l3->l3_base[i];
 185                 flag_mux = l3->l3_flagmux[i];
 186                 err_reg = readl_relaxed(base + flag_mux->offset +
 187                                         L3_FLAGMUX_REGERR0 + (inttype << 3));
 188
 189                 err_reg &= ~(inttype ? flag_mux->mask_app_bits :
 190                                 flag_mux->mask_dbg_bits);
 191
 192                 /* Get the corresponding error and analyse */
 193                 if (err_reg) {
 194                         /* Identify the source from control status register */
 195                         err_src = __ffs(err_reg);
 196
 197                         ret = l3_handle_target(l3, base, flag_mux, err_src);
 198
 199                         /*
 200                          * Certain plaforms may have "undocumented" status
 201                          * pending on boot. So dont generate a severe warning
 202                          * here. Just mask it off to prevent the error from
 203                          * reoccuring and locking up the system.
 204                          */
 205                         if (ret) {
 206                                 dev_err(l3->dev,
 207                                         "L3 %s error: target %d mod:%d %s\n",
 208                                         inttype ? "debug" : "application",
 209                                         err_src, i, "(unclearable)");
 210
 211                                 mask_reg = base + flag_mux->offset +
 212                                            L3_FLAGMUX_MASK0 + (inttype << 3);
 213                                 mask_val = readl_relaxed(mask_reg);
 214                                 mask_val &= ~(1 << err_src);
 215                                 writel_relaxed(mask_val, mask_reg);
 216
 217                                 /* Mark these bits as to be ignored */
 218                                 if (inttype)
 219                                         flag_mux->mask_app_bits |= 1 << err_src;
 220                                 else
 221                                         flag_mux->mask_dbg_bits |= 1 << err_src;
 222                         }
 223
 224                         /* Error found so break the for loop */
 225                         return IRQ_HANDLED;
 226                 }
 227         }
 228
 229         dev_err(l3->dev, "L3 %s IRQ not handled!!\n",
 230                 inttype ? "debug" : "application");
 231
 232         return IRQ_NONE;
 233 }
 234
 235 static const struct of_device_id l3_noc_match[] = {
 236         {.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data},
 237         {.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data},
 238         {.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
 239         {.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
 240         {},
 241 };
 242 MODULE_DEVICE_TABLE(of, l3_noc_match);
 243
 244 static int omap_l3_probe(struct platform_device *pdev)
 245 {
 246         const struct of_device_id *of_id;
 247         static struct omap_l3 *l3;
 248         int ret, i, res_idx;
 249
 250         of_id = of_match_device(l3_noc_match, &pdev->dev);
 251         if (!of_id) {
 252                 dev_err(&pdev->dev, "OF data missing\n");
 253                 return -EINVAL;
 254         }
 255
 256         l3 = devm_kzalloc(&pdev->dev, sizeof(*l3), GFP_KERNEL);
 257         if (!l3)
 258                 return -ENOMEM;
 259
 260         memcpy(l3, of_id->data, sizeof(*l3));
 261         l3->dev = &pdev->dev;
 262         platform_set_drvdata(pdev, l3);
 263
 264         /* Get mem resources */
 265         for (i = 0, res_idx = 0; i < l3->num_modules; i++) {
 266                 struct resource *res;
 267
 268                 if (l3->l3_base[i] == L3_BASE_IS_SUBMODULE) {
 269                         /* First entry cannot be submodule */
 270                         BUG_ON(i == 0);
 271                         l3->l3_base[i] = l3->l3_base[i - 1];
 272                         continue;
 273                 }
 274                 res = platform_get_resource(pdev, IORESOURCE_MEM, res_idx);
 275                 l3->l3_base[i] = devm_ioremap_resource(&pdev->dev, res);
 276                 if (IS_ERR(l3->l3_base[i])) {
 277                         dev_err(l3->dev, "ioremap %d failed\n", i);
 278                         return PTR_ERR(l3->l3_base[i]);
 279                 }
 280                 res_idx++;
 281         }
 282
 283         /*
 284          * Setup interrupt Handlers
 285          */
 286         l3->debug_irq = platform_get_irq(pdev, 0);
 287         ret = devm_request_irq(l3->dev, l3->debug_irq, l3_interrupt_handler,
 288                                0x0, "l3-dbg-irq", l3);
 289         if (ret) {
 290                 dev_err(l3->dev, "request_irq failed for %d\n",
 291                         l3->debug_irq);
 292                 return ret;
 293         }
 294
 295         l3->app_irq = platform_get_irq(pdev, 1);
 296         ret = devm_request_irq(l3->dev, l3->app_irq, l3_interrupt_handler,
 297                                0x0, "l3-app-irq", l3);
 298         if (ret)
 299                 dev_err(l3->dev, "request_irq failed for %d\n", l3->app_irq);
 300
 301         return ret;
 302 }
 303
 304 #ifdef  CONFIG_PM_SLEEP
 305
 306 /**
 307  * l3_resume_noirq() - resume function for l3_noc
 308  * @dev:        pointer to l3_noc device structure
 309  *
 310  * We only have the resume handler only since we
 311  * have already maintained the delta register
 312  * configuration as part of configuring the system
 313  */
 314 static int l3_resume_noirq(struct device *dev)
 315 {
 316         struct omap_l3 *l3 = dev_get_drvdata(dev);
 317         int i;
 318         struct l3_flagmux_data *flag_mux;
 319         void __iomem *base, *mask_regx = NULL;
 320         u32 mask_val;
 321
 322         for (i = 0; i < l3->num_modules; i++) {
 323                 base = l3->l3_base[i];
 324                 flag_mux = l3->l3_flagmux[i];
 325                 if (!flag_mux->mask_app_bits && !flag_mux->mask_dbg_bits)
 326                         continue;
 327
 328                 mask_regx = base + flag_mux->offset + L3_FLAGMUX_MASK0 +
 329                            (L3_APPLICATION_ERROR << 3);
 330                 mask_val = readl_relaxed(mask_regx);
 331                 mask_val &= ~(flag_mux->mask_app_bits);
 332
 333                 writel_relaxed(mask_val, mask_regx);
 334                 mask_regx = base + flag_mux->offset + L3_FLAGMUX_MASK0 +
 335                            (L3_DEBUG_ERROR << 3);
 336                 mask_val = readl_relaxed(mask_regx);
 337                 mask_val &= ~(flag_mux->mask_dbg_bits);
 338
 339                 writel_relaxed(mask_val, mask_regx);
 340         }
 341
 342         /* Dummy read to force OCP barrier */
 343         if (mask_regx)
 344                 (void)readl(mask_regx);
 345
 346         return 0;
 347 }
 348
 349 static const struct dev_pm_ops l3_dev_pm_ops = {
 350         SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, l3_resume_noirq)
 351 };
 352
 353 #define L3_DEV_PM_OPS (&l3_dev_pm_ops)
 354 #else
 355 #define L3_DEV_PM_OPS NULL
 356 #endif
 357
 358 static struct platform_driver omap_l3_driver = {
 359         .probe          = omap_l3_probe,
 360         .driver         = {
 361                 .name           = "omap_l3_noc",
 362                 .pm             = L3_DEV_PM_OPS,
 363                 .of_match_table = of_match_ptr(l3_noc_match),
 364         },
 365 };
 366
 367 static int __init omap_l3_init(void)
 368 {
 369         return platform_driver_register(&omap_l3_driver);
 370 }
 371 postcore_initcall_sync(omap_l3_init);
 372
 373 static void __exit omap_l3_exit(void)
 374 {
 375         platform_driver_unregister(&omap_l3_driver);
 376 }
 377 module_exit(omap_l3_exit);