drivers/clocksource/mxs_timer.c

   1 /*
   2  *  Copyright (C) 2000-2001 Deep Blue Solutions
   3  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
   4  *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
   5  *  Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
   6  *  Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * as published by the Free Software Foundation; either version 2
  11  * of the License, or (at your option) any later version.
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  20  * MA 02110-1301, USA.
  21  */
  22
  23 #include <linux/err.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/irq.h>
  26 #include <linux/clockchips.h>
  27 #include <linux/clk.h>
  28 #include <linux/of.h>
  29 #include <linux/of_address.h>
  30 #include <linux/of_irq.h>
  31 #include <linux/stmp_device.h>
  32 #include <linux/sched_clock.h>
  33
  34 #include <asm/mach/time.h>
  35
  36 /*
  37  * There are 2 versions of the timrot on Freescale MXS-based SoCs.
  38  * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
  39  * extends the counter to 32 bits.
  40  *
  41  * The implementation uses two timers, one for clock_event and
  42  * another for clocksource. MX28 uses timrot 0 and 1, while MX23
  43  * uses 0 and 2.
  44  */
  45
  46 #define MX23_TIMROT_VERSION_OFFSET      0x0a0
  47 #define MX28_TIMROT_VERSION_OFFSET      0x120
  48 #define BP_TIMROT_MAJOR_VERSION         24
  49 #define BV_TIMROT_VERSION_1             0x01
  50 #define BV_TIMROT_VERSION_2             0x02
  51 #define timrot_is_v1()  (timrot_major_version == BV_TIMROT_VERSION_1)
  52
  53 /*
  54  * There are 4 registers for each timrotv2 instance, and 2 registers
  55  * for each timrotv1. So address step 0x40 in macros below strides
  56  * one instance of timrotv2 while two instances of timrotv1.
  57  *
  58  * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1
  59  * on MX28 while timrot2 on MX23.
  60  */
  61 /* common between v1 and v2 */
  62 #define HW_TIMROT_ROTCTRL               0x00
  63 #define HW_TIMROT_TIMCTRLn(n)           (0x20 + (n) * 0x40)
  64 /* v1 only */
  65 #define HW_TIMROT_TIMCOUNTn(n)          (0x30 + (n) * 0x40)
  66 /* v2 only */
  67 #define HW_TIMROT_RUNNING_COUNTn(n)     (0x30 + (n) * 0x40)
  68 #define HW_TIMROT_FIXED_COUNTn(n)       (0x40 + (n) * 0x40)
  69
  70 #define BM_TIMROT_TIMCTRLn_RELOAD       (1 << 6)
  71 #define BM_TIMROT_TIMCTRLn_UPDATE       (1 << 7)
  72 #define BM_TIMROT_TIMCTRLn_IRQ_EN       (1 << 14)
  73 #define BM_TIMROT_TIMCTRLn_IRQ          (1 << 15)
  74 #define BP_TIMROT_TIMCTRLn_SELECT       0
  75 #define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL         0x8
  76 #define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL         0xb
  77 #define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS        0xf
  78
  79 static struct clock_event_device mxs_clockevent_device;
  80
  81 static void __iomem *mxs_timrot_base;
  82 static u32 timrot_major_version;
  83
  84 static inline void timrot_irq_disable(void)
  85 {
  86         __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
  87                      HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
  88 }
  89
  90 static inline void timrot_irq_enable(void)
  91 {
  92         __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
  93                      HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET);
  94 }
  95
  96 static void timrot_irq_acknowledge(void)
  97 {
  98         __raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base +
  99                      HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
 100 }
 101
 102 static cycle_t timrotv1_get_cycles(struct clocksource *cs)
 103 {
 104         return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1))
 105                         & 0xffff0000) >> 16);
 106 }
 107
 108 static int timrotv1_set_next_event(unsigned long evt,
 109                                         struct clock_event_device *dev)
 110 {
 111         /* timrot decrements the count */
 112         __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0));
 113
 114         return 0;
 115 }
 116
 117 static int timrotv2_set_next_event(unsigned long evt,
 118                                         struct clock_event_device *dev)
 119 {
 120         /* timrot decrements the count */
 121         __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0));
 122
 123         return 0;
 124 }
 125
 126 static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
 127 {
 128         struct clock_event_device *evt = dev_id;
 129
 130         timrot_irq_acknowledge();
 131         evt->event_handler(evt);
 132
 133         return IRQ_HANDLED;
 134 }
 135
 136 static struct irqaction mxs_timer_irq = {
 137         .name           = "MXS Timer Tick",
 138         .dev_id         = &mxs_clockevent_device,
 139         .flags          = IRQF_TIMER | IRQF_IRQPOLL,
 140         .handler        = mxs_timer_interrupt,
 141 };
 142
 143 static void mxs_irq_clear(char *state)
 144 {
 145         /* Disable interrupt in timer module */
 146         timrot_irq_disable();
 147
 148         /* Set event time into the furthest future */
 149         if (timrot_is_v1())
 150                 __raw_writel(0xffff, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
 151         else
 152                 __raw_writel(0xffffffff,
 153                              mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
 154
 155         /* Clear pending interrupt */
 156         timrot_irq_acknowledge();
 157
 158 #ifdef DEBUG
 159         pr_info("%s: changing mode to %s\n", __func__, state)
 160 #endif /* DEBUG */
 161 }
 162
 163 static int mxs_shutdown(struct clock_event_device *evt)
 164 {
 165         mxs_irq_clear("shutdown");
 166
 167         return 0;
 168 }
 169
 170 static int mxs_set_oneshot(struct clock_event_device *evt)
 171 {
 172         if (clockevent_state_oneshot(evt))
 173                 mxs_irq_clear("oneshot");
 174         timrot_irq_enable();
 175         return 0;
 176 }
 177
 178 static struct clock_event_device mxs_clockevent_device = {
 179         .name                   = "mxs_timrot",
 180         .features               = CLOCK_EVT_FEAT_ONESHOT,
 181         .set_state_shutdown     = mxs_shutdown,
 182         .set_state_oneshot      = mxs_set_oneshot,
 183         .tick_resume            = mxs_shutdown,
 184         .set_next_event         = timrotv2_set_next_event,
 185         .rating                 = 200,
 186 };
 187
 188 static int __init mxs_clockevent_init(struct clk *timer_clk)
 189 {
 190         if (timrot_is_v1())
 191                 mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
 192         mxs_clockevent_device.cpumask = cpumask_of(0);
 193         clockevents_config_and_register(&mxs_clockevent_device,
 194                                         clk_get_rate(timer_clk),
 195                                         timrot_is_v1() ? 0xf : 0x2,
 196                                         timrot_is_v1() ? 0xfffe : 0xfffffffe);
 197
 198         return 0;
 199 }
 200
 201 static struct clocksource clocksource_mxs = {
 202         .name           = "mxs_timer",
 203         .rating         = 200,
 204         .read           = timrotv1_get_cycles,
 205         .mask           = CLOCKSOURCE_MASK(16),
 206         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 207 };
 208
 209 static u64 notrace mxs_read_sched_clock_v2(void)
 210 {
 211         return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
 212 }
 213
 214 static int __init mxs_clocksource_init(struct clk *timer_clk)
 215 {
 216         unsigned int c = clk_get_rate(timer_clk);
 217
 218         if (timrot_is_v1())
 219                 clocksource_register_hz(&clocksource_mxs, c);
 220         else {
 221                 clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
 222                         "mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
 223                 sched_clock_register(mxs_read_sched_clock_v2, 32, c);
 224         }
 225
 226         return 0;
 227 }
 228
 229 static void __init mxs_timer_init(struct device_node *np)
 230 {
 231         struct clk *timer_clk;
 232         int irq;
 233
 234         mxs_timrot_base = of_iomap(np, 0);
 235         WARN_ON(!mxs_timrot_base);
 236
 237         timer_clk = of_clk_get(np, 0);
 238         if (IS_ERR(timer_clk)) {
 239                 pr_err("%s: failed to get clk\n", __func__);
 240                 return;
 241         }
 242
 243         clk_prepare_enable(timer_clk);
 244
 245         /*
 246          * Initialize timers to a known state
 247          */
 248         stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
 249
 250         /* get timrot version */
 251         timrot_major_version = __raw_readl(mxs_timrot_base +
 252                         (of_device_is_compatible(np, "fsl,imx23-timrot") ?
 253                                                 MX23_TIMROT_VERSION_OFFSET :
 254                                                 MX28_TIMROT_VERSION_OFFSET));
 255         timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
 256
 257         /* one for clock_event */
 258         __raw_writel((timrot_is_v1() ?
 259                         BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
 260                         BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
 261                         BM_TIMROT_TIMCTRLn_UPDATE |
 262                         BM_TIMROT_TIMCTRLn_IRQ_EN,
 263                         mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
 264
 265         /* another for clocksource */
 266         __raw_writel((timrot_is_v1() ?
 267                         BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
 268                         BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
 269                         BM_TIMROT_TIMCTRLn_RELOAD,
 270                         mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
 271
 272         /* set clocksource timer fixed count to the maximum */
 273         if (timrot_is_v1())
 274                 __raw_writel(0xffff,
 275                         mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
 276         else
 277                 __raw_writel(0xffffffff,
 278                         mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
 279
 280         /* init and register the timer to the framework */
 281         mxs_clocksource_init(timer_clk);
 282         mxs_clockevent_init(timer_clk);
 283
 284         /* Make irqs happen */
 285         irq = irq_of_parse_and_map(np, 0);
 286         setup_irq(irq, &mxs_timer_irq);
 287 }
 288 CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);