[media] media-device: fix builds when USB or PCI is compiled as module
[deliverable/linux.git] / drivers / gpio / gpio-ge.c
1 /*
2 * Driver for GE FPGA based GPIO
3 *
4 * Author: Martyn Welch <martyn.welch@ge.com>
5 *
6 * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
7 *
8 * This file is licensed under the terms of the GNU General Public License
9 * version 2. This program is licensed "as is" without any warranty of any
10 * kind, whether express or implied.
11 */
12
13 /* TODO
14 *
15 * Configuration of output modes (totem-pole/open-drain)
16 * Interrupt configuration - interrupts are always generated the FPGA relies on
17 * the I/O interrupt controllers mask to stop them propergating
18 */
19
20 #include <linux/kernel.h>
21 #include <linux/io.h>
22 #include <linux/slab.h>
23 #include <linux/of_device.h>
24 #include <linux/of_gpio.h>
25 #include <linux/of_address.h>
26 #include <linux/module.h>
27 #include <linux/gpio/driver.h>
28
29 #define GEF_GPIO_DIRECT 0x00
30 #define GEF_GPIO_IN 0x04
31 #define GEF_GPIO_OUT 0x08
32 #define GEF_GPIO_TRIG 0x0C
33 #define GEF_GPIO_POLAR_A 0x10
34 #define GEF_GPIO_POLAR_B 0x14
35 #define GEF_GPIO_INT_STAT 0x18
36 #define GEF_GPIO_OVERRUN 0x1C
37 #define GEF_GPIO_MODE 0x20
38
39 static const struct of_device_id gef_gpio_ids[] = {
40 {
41 .compatible = "gef,sbc610-gpio",
42 .data = (void *)19,
43 }, {
44 .compatible = "gef,sbc310-gpio",
45 .data = (void *)6,
46 }, {
47 .compatible = "ge,imp3a-gpio",
48 .data = (void *)16,
49 },
50 { }
51 };
52 MODULE_DEVICE_TABLE(of, gef_gpio_ids);
53
54 static int __init gef_gpio_probe(struct platform_device *pdev)
55 {
56 const struct of_device_id *of_id =
57 of_match_device(gef_gpio_ids, &pdev->dev);
58 struct gpio_chip *gc;
59 void __iomem *regs;
60 int ret;
61
62 gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
63 if (!gc)
64 return -ENOMEM;
65
66 regs = of_iomap(pdev->dev.of_node, 0);
67 if (!regs)
68 return -ENOMEM;
69
70 ret = bgpio_init(gc, &pdev->dev, 4, regs + GEF_GPIO_IN,
71 regs + GEF_GPIO_OUT, NULL, NULL,
72 regs + GEF_GPIO_DIRECT, BGPIOF_BIG_ENDIAN_BYTE_ORDER);
73 if (ret) {
74 dev_err(&pdev->dev, "bgpio_init failed\n");
75 goto err0;
76 }
77
78 /* Setup pointers to chip functions */
79 gc->label = devm_kstrdup(&pdev->dev, pdev->dev.of_node->full_name,
80 GFP_KERNEL);
81 if (!gc->label) {
82 ret = -ENOMEM;
83 goto err0;
84 }
85
86 gc->base = -1;
87 gc->ngpio = (u16)(uintptr_t)of_id->data;
88 gc->of_gpio_n_cells = 2;
89 gc->of_node = pdev->dev.of_node;
90
91 /* This function adds a memory mapped GPIO chip */
92 ret = devm_gpiochip_add_data(&pdev->dev, gc, NULL);
93 if (ret)
94 goto err0;
95
96 return 0;
97 err0:
98 iounmap(regs);
99 pr_err("%s: GPIO chip registration failed\n",
100 pdev->dev.of_node->full_name);
101 return ret;
102 };
103
104 static struct platform_driver gef_gpio_driver = {
105 .driver = {
106 .name = "gef-gpio",
107 .of_match_table = gef_gpio_ids,
108 },
109 };
110 module_platform_driver_probe(gef_gpio_driver, gef_gpio_probe);
111
112 MODULE_DESCRIPTION("GE I/O FPGA GPIO driver");
113 MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com");
114 MODULE_LICENSE("GPL");
This page took 0.037568 seconds and 5 git commands to generate.