drivers/gpu/drm/gma500/psb_intel_lvds.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms and conditions of the GNU General Public License,
   6  * version 2, as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope it will be useful, but WITHOUT
   9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  11  * more details.
  12  *
  13  * You should have received a copy of the GNU General Public License along with
  14  * this program; if not, write to the Free Software Foundation, Inc.,
  15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  16  *
  17  * Authors:
  18  *      Eric Anholt <eric@anholt.net>
  19  *      Dave Airlie <airlied@linux.ie>
  20  *      Jesse Barnes <jesse.barnes@intel.com>
  21  */
  22
  23 #include <linux/i2c.h>
  24 #include <drm/drmP.h>
  25
  26 #include "intel_bios.h"
  27 #include "psb_drv.h"
  28 #include "psb_intel_drv.h"
  29 #include "psb_intel_reg.h"
  30 #include "power.h"
  31 #include <linux/pm_runtime.h>
  32
  33 /*
  34  * LVDS I2C backlight control macros
  35  */
  36 #define BRIGHTNESS_MAX_LEVEL 100
  37 #define BRIGHTNESS_MASK 0xFF
  38 #define BLC_I2C_TYPE    0x01
  39 #define BLC_PWM_TYPT    0x02
  40
  41 #define BLC_POLARITY_NORMAL 0
  42 #define BLC_POLARITY_INVERSE 1
  43
  44 #define PSB_BLC_MAX_PWM_REG_FREQ       (0xFFFE)
  45 #define PSB_BLC_MIN_PWM_REG_FREQ        (0x2)
  46 #define PSB_BLC_PWM_PRECISION_FACTOR    (10)
  47 #define PSB_BACKLIGHT_PWM_CTL_SHIFT     (16)
  48 #define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
  49
  50 struct psb_intel_lvds_priv {
  51         /*
  52          * Saved LVDO output states
  53          */
  54         uint32_t savePP_ON;
  55         uint32_t savePP_OFF;
  56         uint32_t saveLVDS;
  57         uint32_t savePP_CONTROL;
  58         uint32_t savePP_CYCLE;
  59         uint32_t savePFIT_CONTROL;
  60         uint32_t savePFIT_PGM_RATIOS;
  61         uint32_t saveBLC_PWM_CTL;
  62
  63         struct psb_intel_i2c_chan *i2c_bus;
  64         struct psb_intel_i2c_chan *ddc_bus;
  65 };
  66
  67
  68 /*
  69  * Returns the maximum level of the backlight duty cycle field.
  70  */
  71 static u32 psb_intel_lvds_get_max_backlight(struct drm_device *dev)
  72 {
  73         struct drm_psb_private *dev_priv = dev->dev_private;
  74         u32 ret;
  75
  76         if (gma_power_begin(dev, false)) {
  77                 ret = REG_READ(BLC_PWM_CTL);
  78                 gma_power_end(dev);
  79         } else /* Powered off, use the saved value */
  80                 ret = dev_priv->regs.saveBLC_PWM_CTL;
  81
  82         /* Top 15bits hold the frequency mask */
  83         ret = (ret &  BACKLIGHT_MODULATION_FREQ_MASK) >>
  84                                         BACKLIGHT_MODULATION_FREQ_SHIFT;
  85
  86         ret *= 2;       /* Return a 16bit range as needed for setting */
  87         if (ret == 0)
  88                 dev_err(dev->dev, "BL bug: Reg %08x save %08X\n",
  89                         REG_READ(BLC_PWM_CTL), dev_priv->regs.saveBLC_PWM_CTL);
  90         return ret;
  91 }
  92
  93 /*
  94  * Set LVDS backlight level by I2C command
  95  *
  96  * FIXME: at some point we need to both track this for PM and also
  97  * disable runtime pm on MRST if the brightness is nil (ie blanked)
  98  */
  99 static int psb_lvds_i2c_set_brightness(struct drm_device *dev,
 100                                         unsigned int level)
 101 {
 102         struct drm_psb_private *dev_priv =
 103                 (struct drm_psb_private *)dev->dev_private;
 104
 105         struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
 106         u8 out_buf[2];
 107         unsigned int blc_i2c_brightness;
 108
 109         struct i2c_msg msgs[] = {
 110                 {
 111                         .addr = lvds_i2c_bus->slave_addr,
 112                         .flags = 0,
 113                         .len = 2,
 114                         .buf = out_buf,
 115                 }
 116         };
 117
 118         blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
 119                              BRIGHTNESS_MASK /
 120                              BRIGHTNESS_MAX_LEVEL);
 121
 122         if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
 123                 blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
 124
 125         out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
 126         out_buf[1] = (u8)blc_i2c_brightness;
 127
 128         if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1) {
 129                 dev_dbg(dev->dev, "I2C set brightness.(command, value) (%d, %d)\n",
 130                         dev_priv->lvds_bl->brightnesscmd,
 131                         blc_i2c_brightness);
 132                 return 0;
 133         }
 134
 135         dev_err(dev->dev, "I2C transfer error\n");
 136         return -1;
 137 }
 138
 139
 140 static int psb_lvds_pwm_set_brightness(struct drm_device *dev, int level)
 141 {
 142         struct drm_psb_private *dev_priv =
 143                         (struct drm_psb_private *)dev->dev_private;
 144
 145         u32 max_pwm_blc;
 146         u32 blc_pwm_duty_cycle;
 147
 148         max_pwm_blc = psb_intel_lvds_get_max_backlight(dev);
 149
 150         /*BLC_PWM_CTL Should be initiated while backlight device init*/
 151         BUG_ON(max_pwm_blc == 0);
 152
 153         blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
 154
 155         if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
 156                 blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
 157
 158         blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
 159         REG_WRITE(BLC_PWM_CTL,
 160                   (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
 161                   (blc_pwm_duty_cycle));
 162
 163         dev_info(dev->dev, "Backlight lvds set brightness %08x\n",
 164                   (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
 165                   (blc_pwm_duty_cycle));
 166
 167         return 0;
 168 }
 169
 170 /*
 171  * Set LVDS backlight level either by I2C or PWM
 172  */
 173 void psb_intel_lvds_set_brightness(struct drm_device *dev, int level)
 174 {
 175         struct drm_psb_private *dev_priv = dev->dev_private;
 176
 177         dev_dbg(dev->dev, "backlight level is %d\n", level);
 178
 179         if (!dev_priv->lvds_bl) {
 180                 dev_err(dev->dev, "NO LVDS backlight info\n");
 181                 return;
 182         }
 183
 184         if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
 185                 psb_lvds_i2c_set_brightness(dev, level);
 186         else
 187                 psb_lvds_pwm_set_brightness(dev, level);
 188 }
 189
 190 /*
 191  * Sets the backlight level.
 192  *
 193  * level: backlight level, from 0 to psb_intel_lvds_get_max_backlight().
 194  */
 195 static void psb_intel_lvds_set_backlight(struct drm_device *dev, int level)
 196 {
 197         struct drm_psb_private *dev_priv = dev->dev_private;
 198         u32 blc_pwm_ctl;
 199
 200         if (gma_power_begin(dev, false)) {
 201                 blc_pwm_ctl = REG_READ(BLC_PWM_CTL);
 202                 blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK;
 203                 REG_WRITE(BLC_PWM_CTL,
 204                                 (blc_pwm_ctl |
 205                                 (level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
 206                 dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl |
 207                                         (level << BACKLIGHT_DUTY_CYCLE_SHIFT));
 208                 gma_power_end(dev);
 209         } else {
 210                 blc_pwm_ctl = dev_priv->regs.saveBLC_PWM_CTL &
 211                                 ~BACKLIGHT_DUTY_CYCLE_MASK;
 212                 dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl |
 213                                         (level << BACKLIGHT_DUTY_CYCLE_SHIFT));
 214         }
 215 }
 216
 217 /*
 218  * Sets the power state for the panel.
 219  */
 220 static void psb_intel_lvds_set_power(struct drm_device *dev, bool on)
 221 {
 222         struct drm_psb_private *dev_priv = dev->dev_private;
 223         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 224         u32 pp_status;
 225
 226         if (!gma_power_begin(dev, true)) {
 227                 dev_err(dev->dev, "set power, chip off!\n");
 228                 return;
 229         }
 230
 231         if (on) {
 232                 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
 233                           POWER_TARGET_ON);
 234                 do {
 235                         pp_status = REG_READ(PP_STATUS);
 236                 } while ((pp_status & PP_ON) == 0);
 237
 238                 psb_intel_lvds_set_backlight(dev,
 239                                              mode_dev->backlight_duty_cycle);
 240         } else {
 241                 psb_intel_lvds_set_backlight(dev, 0);
 242
 243                 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
 244                           ~POWER_TARGET_ON);
 245                 do {
 246                         pp_status = REG_READ(PP_STATUS);
 247                 } while (pp_status & PP_ON);
 248         }
 249
 250         gma_power_end(dev);
 251 }
 252
 253 static void psb_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
 254 {
 255         struct drm_device *dev = encoder->dev;
 256
 257         if (mode == DRM_MODE_DPMS_ON)
 258                 psb_intel_lvds_set_power(dev, true);
 259         else
 260                 psb_intel_lvds_set_power(dev, false);
 261
 262         /* XXX: We never power down the LVDS pairs. */
 263 }
 264
 265 static void psb_intel_lvds_save(struct drm_connector *connector)
 266 {
 267         struct drm_device *dev = connector->dev;
 268         struct drm_psb_private *dev_priv =
 269                 (struct drm_psb_private *)dev->dev_private;
 270         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 271         struct psb_intel_lvds_priv *lvds_priv =
 272                 (struct psb_intel_lvds_priv *)gma_encoder->dev_priv;
 273
 274         lvds_priv->savePP_ON = REG_READ(LVDSPP_ON);
 275         lvds_priv->savePP_OFF = REG_READ(LVDSPP_OFF);
 276         lvds_priv->saveLVDS = REG_READ(LVDS);
 277         lvds_priv->savePP_CONTROL = REG_READ(PP_CONTROL);
 278         lvds_priv->savePP_CYCLE = REG_READ(PP_CYCLE);
 279         /*lvds_priv->savePP_DIVISOR = REG_READ(PP_DIVISOR);*/
 280         lvds_priv->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
 281         lvds_priv->savePFIT_CONTROL = REG_READ(PFIT_CONTROL);
 282         lvds_priv->savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS);
 283
 284         /*TODO: move backlight_duty_cycle to psb_intel_lvds_priv*/
 285         dev_priv->backlight_duty_cycle = (dev_priv->regs.saveBLC_PWM_CTL &
 286                                                 BACKLIGHT_DUTY_CYCLE_MASK);
 287
 288         /*
 289          * If the light is off at server startup,
 290          * just make it full brightness
 291          */
 292         if (dev_priv->backlight_duty_cycle == 0)
 293                 dev_priv->backlight_duty_cycle =
 294                 psb_intel_lvds_get_max_backlight(dev);
 295
 296         dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
 297                         lvds_priv->savePP_ON,
 298                         lvds_priv->savePP_OFF,
 299                         lvds_priv->saveLVDS,
 300                         lvds_priv->savePP_CONTROL,
 301                         lvds_priv->savePP_CYCLE,
 302                         lvds_priv->saveBLC_PWM_CTL);
 303 }
 304
 305 static void psb_intel_lvds_restore(struct drm_connector *connector)
 306 {
 307         struct drm_device *dev = connector->dev;
 308         u32 pp_status;
 309         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 310         struct psb_intel_lvds_priv *lvds_priv =
 311                 (struct psb_intel_lvds_priv *)gma_encoder->dev_priv;
 312
 313         dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
 314                         lvds_priv->savePP_ON,
 315                         lvds_priv->savePP_OFF,
 316                         lvds_priv->saveLVDS,
 317                         lvds_priv->savePP_CONTROL,
 318                         lvds_priv->savePP_CYCLE,
 319                         lvds_priv->saveBLC_PWM_CTL);
 320
 321         REG_WRITE(BLC_PWM_CTL, lvds_priv->saveBLC_PWM_CTL);
 322         REG_WRITE(PFIT_CONTROL, lvds_priv->savePFIT_CONTROL);
 323         REG_WRITE(PFIT_PGM_RATIOS, lvds_priv->savePFIT_PGM_RATIOS);
 324         REG_WRITE(LVDSPP_ON, lvds_priv->savePP_ON);
 325         REG_WRITE(LVDSPP_OFF, lvds_priv->savePP_OFF);
 326         /*REG_WRITE(PP_DIVISOR, lvds_priv->savePP_DIVISOR);*/
 327         REG_WRITE(PP_CYCLE, lvds_priv->savePP_CYCLE);
 328         REG_WRITE(PP_CONTROL, lvds_priv->savePP_CONTROL);
 329         REG_WRITE(LVDS, lvds_priv->saveLVDS);
 330
 331         if (lvds_priv->savePP_CONTROL & POWER_TARGET_ON) {
 332                 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
 333                         POWER_TARGET_ON);
 334                 do {
 335                         pp_status = REG_READ(PP_STATUS);
 336                 } while ((pp_status & PP_ON) == 0);
 337         } else {
 338                 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
 339                         ~POWER_TARGET_ON);
 340                 do {
 341                         pp_status = REG_READ(PP_STATUS);
 342                 } while (pp_status & PP_ON);
 343         }
 344 }
 345
 346 int psb_intel_lvds_mode_valid(struct drm_connector *connector,
 347                                  struct drm_display_mode *mode)
 348 {
 349         struct drm_psb_private *dev_priv = connector->dev->dev_private;
 350         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 351         struct drm_display_mode *fixed_mode =
 352                                         dev_priv->mode_dev.panel_fixed_mode;
 353
 354         if (gma_encoder->type == INTEL_OUTPUT_MIPI2)
 355                 fixed_mode = dev_priv->mode_dev.panel_fixed_mode2;
 356
 357         /* just in case */
 358         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 359                 return MODE_NO_DBLESCAN;
 360
 361         /* just in case */
 362         if (mode->flags & DRM_MODE_FLAG_INTERLACE)
 363                 return MODE_NO_INTERLACE;
 364
 365         if (fixed_mode) {
 366                 if (mode->hdisplay > fixed_mode->hdisplay)
 367                         return MODE_PANEL;
 368                 if (mode->vdisplay > fixed_mode->vdisplay)
 369                         return MODE_PANEL;
 370         }
 371         return MODE_OK;
 372 }
 373
 374 bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder,
 375                                   const struct drm_display_mode *mode,
 376                                   struct drm_display_mode *adjusted_mode)
 377 {
 378         struct drm_device *dev = encoder->dev;
 379         struct drm_psb_private *dev_priv = dev->dev_private;
 380         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 381         struct gma_crtc *gma_crtc = to_gma_crtc(encoder->crtc);
 382         struct drm_encoder *tmp_encoder;
 383         struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
 384         struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
 385
 386         if (gma_encoder->type == INTEL_OUTPUT_MIPI2)
 387                 panel_fixed_mode = mode_dev->panel_fixed_mode2;
 388
 389         /* PSB requires the LVDS is on pipe B, MRST has only one pipe anyway */
 390         if (!IS_MRST(dev) && gma_crtc->pipe == 0) {
 391                 printk(KERN_ERR "Can't support LVDS on pipe A\n");
 392                 return false;
 393         }
 394         if (IS_MRST(dev) && gma_crtc->pipe != 0) {
 395                 printk(KERN_ERR "Must use PIPE A\n");
 396                 return false;
 397         }
 398         /* Should never happen!! */
 399         list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
 400                             head) {
 401                 if (tmp_encoder != encoder
 402                     && tmp_encoder->crtc == encoder->crtc) {
 403                         printk(KERN_ERR "Can't enable LVDS and another "
 404                                "encoder on the same pipe\n");
 405                         return false;
 406                 }
 407         }
 408
 409         /*
 410          * If we have timings from the BIOS for the panel, put them in
 411          * to the adjusted mode.  The CRTC will be set up for this mode,
 412          * with the panel scaling set up to source from the H/VDisplay
 413          * of the original mode.
 414          */
 415         if (panel_fixed_mode != NULL) {
 416                 adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
 417                 adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
 418                 adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
 419                 adjusted_mode->htotal = panel_fixed_mode->htotal;
 420                 adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
 421                 adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
 422                 adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
 423                 adjusted_mode->vtotal = panel_fixed_mode->vtotal;
 424                 adjusted_mode->clock = panel_fixed_mode->clock;
 425                 drm_mode_set_crtcinfo(adjusted_mode,
 426                                       CRTC_INTERLACE_HALVE_V);
 427         }
 428
 429         /*
 430          * XXX: It would be nice to support lower refresh rates on the
 431          * panels to reduce power consumption, and perhaps match the
 432          * user's requested refresh rate.
 433          */
 434
 435         return true;
 436 }
 437
 438 static void psb_intel_lvds_prepare(struct drm_encoder *encoder)
 439 {
 440         struct drm_device *dev = encoder->dev;
 441         struct drm_psb_private *dev_priv = dev->dev_private;
 442         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 443
 444         if (!gma_power_begin(dev, true))
 445                 return;
 446
 447         mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
 448         mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
 449                                           BACKLIGHT_DUTY_CYCLE_MASK);
 450
 451         psb_intel_lvds_set_power(dev, false);
 452
 453         gma_power_end(dev);
 454 }
 455
 456 static void psb_intel_lvds_commit(struct drm_encoder *encoder)
 457 {
 458         struct drm_device *dev = encoder->dev;
 459         struct drm_psb_private *dev_priv = dev->dev_private;
 460         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 461
 462         if (mode_dev->backlight_duty_cycle == 0)
 463                 mode_dev->backlight_duty_cycle =
 464                     psb_intel_lvds_get_max_backlight(dev);
 465
 466         psb_intel_lvds_set_power(dev, true);
 467 }
 468
 469 static void psb_intel_lvds_mode_set(struct drm_encoder *encoder,
 470                                 struct drm_display_mode *mode,
 471                                 struct drm_display_mode *adjusted_mode)
 472 {
 473         struct drm_device *dev = encoder->dev;
 474         struct drm_psb_private *dev_priv = dev->dev_private;
 475         u32 pfit_control;
 476
 477         /*
 478          * The LVDS pin pair will already have been turned on in the
 479          * psb_intel_crtc_mode_set since it has a large impact on the DPLL
 480          * settings.
 481          */
 482
 483         /*
 484          * Enable automatic panel scaling so that non-native modes fill the
 485          * screen.  Should be enabled before the pipe is enabled, according to
 486          * register description and PRM.
 487          */
 488         if (mode->hdisplay != adjusted_mode->hdisplay ||
 489             mode->vdisplay != adjusted_mode->vdisplay)
 490                 pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
 491                                 HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
 492                                 HORIZ_INTERP_BILINEAR);
 493         else
 494                 pfit_control = 0;
 495
 496         if (dev_priv->lvds_dither)
 497                 pfit_control |= PANEL_8TO6_DITHER_ENABLE;
 498
 499         REG_WRITE(PFIT_CONTROL, pfit_control);
 500 }
 501
 502 /*
 503  * Detect the LVDS connection.
 504  *
 505  * This always returns CONNECTOR_STATUS_CONNECTED.
 506  * This connector should only have
 507  * been set up if the LVDS was actually connected anyway.
 508  */
 509 static enum drm_connector_status psb_intel_lvds_detect(struct drm_connector
 510                                                    *connector, bool force)
 511 {
 512         return connector_status_connected;
 513 }
 514
 515 /*
 516  * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
 517  */
 518 static int psb_intel_lvds_get_modes(struct drm_connector *connector)
 519 {
 520         struct drm_device *dev = connector->dev;
 521         struct drm_psb_private *dev_priv = dev->dev_private;
 522         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 523         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 524         struct psb_intel_lvds_priv *lvds_priv = gma_encoder->dev_priv;
 525         int ret = 0;
 526
 527         if (!IS_MRST(dev))
 528                 ret = psb_intel_ddc_get_modes(connector, &lvds_priv->i2c_bus->adapter);
 529
 530         if (ret)
 531                 return ret;
 532
 533         /* Didn't get an EDID, so
 534          * Set wide sync ranges so we get all modes
 535          * handed to valid_mode for checking
 536          */
 537         connector->display_info.min_vfreq = 0;
 538         connector->display_info.max_vfreq = 200;
 539         connector->display_info.min_hfreq = 0;
 540         connector->display_info.max_hfreq = 200;
 541
 542         if (mode_dev->panel_fixed_mode != NULL) {
 543                 struct drm_display_mode *mode =
 544                     drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
 545                 drm_mode_probed_add(connector, mode);
 546                 return 1;
 547         }
 548
 549         return 0;
 550 }
 551
 552 /**
 553  * psb_intel_lvds_destroy - unregister and free LVDS structures
 554  * @connector: connector to free
 555  *
 556  * Unregister the DDC bus for this connector then free the driver private
 557  * structure.
 558  */
 559 void psb_intel_lvds_destroy(struct drm_connector *connector)
 560 {
 561         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 562         struct psb_intel_lvds_priv *lvds_priv = gma_encoder->dev_priv;
 563
 564         psb_intel_i2c_destroy(lvds_priv->ddc_bus);
 565         drm_connector_unregister(connector);
 566         drm_connector_cleanup(connector);
 567         kfree(connector);
 568 }
 569
 570 int psb_intel_lvds_set_property(struct drm_connector *connector,
 571                                        struct drm_property *property,
 572                                        uint64_t value)
 573 {
 574         struct drm_encoder *encoder = connector->encoder;
 575
 576         if (!encoder)
 577                 return -1;
 578
 579         if (!strcmp(property->name, "scaling mode")) {
 580                 struct gma_crtc *crtc = to_gma_crtc(encoder->crtc);
 581                 uint64_t curval;
 582
 583                 if (!crtc)
 584                         goto set_prop_error;
 585
 586                 switch (value) {
 587                 case DRM_MODE_SCALE_FULLSCREEN:
 588                         break;
 589                 case DRM_MODE_SCALE_NO_SCALE:
 590                         break;
 591                 case DRM_MODE_SCALE_ASPECT:
 592                         break;
 593                 default:
 594                         goto set_prop_error;
 595                 }
 596
 597                 if (drm_object_property_get_value(&connector->base,
 598                                                      property,
 599                                                      &curval))
 600                         goto set_prop_error;
 601
 602                 if (curval == value)
 603                         goto set_prop_done;
 604
 605                 if (drm_object_property_set_value(&connector->base,
 606                                                         property,
 607                                                         value))
 608                         goto set_prop_error;
 609
 610                 if (crtc->saved_mode.hdisplay != 0 &&
 611                     crtc->saved_mode.vdisplay != 0) {
 612                         if (!drm_crtc_helper_set_mode(encoder->crtc,
 613                                                       &crtc->saved_mode,
 614                                                       encoder->crtc->x,
 615                                                       encoder->crtc->y,
 616                                                       encoder->crtc->primary->fb))
 617                                 goto set_prop_error;
 618                 }
 619         } else if (!strcmp(property->name, "backlight")) {
 620                 if (drm_object_property_set_value(&connector->base,
 621                                                         property,
 622                                                         value))
 623                         goto set_prop_error;
 624                 else
 625                         gma_backlight_set(encoder->dev, value);
 626         } else if (!strcmp(property->name, "DPMS")) {
 627                 const struct drm_encoder_helper_funcs *hfuncs
 628                                                 = encoder->helper_private;
 629                 hfuncs->dpms(encoder, value);
 630         }
 631
 632 set_prop_done:
 633         return 0;
 634 set_prop_error:
 635         return -1;
 636 }
 637
 638 static const struct drm_encoder_helper_funcs psb_intel_lvds_helper_funcs = {
 639         .dpms = psb_intel_lvds_encoder_dpms,
 640         .mode_fixup = psb_intel_lvds_mode_fixup,
 641         .prepare = psb_intel_lvds_prepare,
 642         .mode_set = psb_intel_lvds_mode_set,
 643         .commit = psb_intel_lvds_commit,
 644 };
 645
 646 const struct drm_connector_helper_funcs
 647                                 psb_intel_lvds_connector_helper_funcs = {
 648         .get_modes = psb_intel_lvds_get_modes,
 649         .mode_valid = psb_intel_lvds_mode_valid,
 650         .best_encoder = gma_best_encoder,
 651 };
 652
 653 const struct drm_connector_funcs psb_intel_lvds_connector_funcs = {
 654         .dpms = drm_helper_connector_dpms,
 655         .detect = psb_intel_lvds_detect,
 656         .fill_modes = drm_helper_probe_single_connector_modes,
 657         .set_property = psb_intel_lvds_set_property,
 658         .destroy = psb_intel_lvds_destroy,
 659 };
 660
 661
 662 static void psb_intel_lvds_enc_destroy(struct drm_encoder *encoder)
 663 {
 664         drm_encoder_cleanup(encoder);
 665 }
 666
 667 const struct drm_encoder_funcs psb_intel_lvds_enc_funcs = {
 668         .destroy = psb_intel_lvds_enc_destroy,
 669 };
 670
 671
 672
 673 /**
 674  * psb_intel_lvds_init - setup LVDS connectors on this device
 675  * @dev: drm device
 676  *
 677  * Create the connector, register the LVDS DDC bus, and try to figure out what
 678  * modes we can display on the LVDS panel (if present).
 679  */
 680 void psb_intel_lvds_init(struct drm_device *dev,
 681                          struct psb_intel_mode_device *mode_dev)
 682 {
 683         struct gma_encoder *gma_encoder;
 684         struct gma_connector *gma_connector;
 685         struct psb_intel_lvds_priv *lvds_priv;
 686         struct drm_connector *connector;
 687         struct drm_encoder *encoder;
 688         struct drm_display_mode *scan;  /* *modes, *bios_mode; */
 689         struct drm_crtc *crtc;
 690         struct drm_psb_private *dev_priv = dev->dev_private;
 691         u32 lvds;
 692         int pipe;
 693
 694         gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL);
 695         if (!gma_encoder) {
 696                 dev_err(dev->dev, "gma_encoder allocation error\n");
 697                 return;
 698         }
 699
 700         gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL);
 701         if (!gma_connector) {
 702                 dev_err(dev->dev, "gma_connector allocation error\n");
 703                 goto failed_encoder;
 704         }
 705
 706         lvds_priv = kzalloc(sizeof(struct psb_intel_lvds_priv), GFP_KERNEL);
 707         if (!lvds_priv) {
 708                 dev_err(dev->dev, "LVDS private allocation error\n");
 709                 goto failed_connector;
 710         }
 711
 712         gma_encoder->dev_priv = lvds_priv;
 713
 714         connector = &gma_connector->base;
 715         gma_connector->save = psb_intel_lvds_save;
 716         gma_connector->restore = psb_intel_lvds_restore;
 717
 718         encoder = &gma_encoder->base;
 719         drm_connector_init(dev, connector,
 720                            &psb_intel_lvds_connector_funcs,
 721                            DRM_MODE_CONNECTOR_LVDS);
 722
 723         drm_encoder_init(dev, encoder,
 724                          &psb_intel_lvds_enc_funcs,
 725                          DRM_MODE_ENCODER_LVDS, NULL);
 726
 727         gma_connector_attach_encoder(gma_connector, gma_encoder);
 728         gma_encoder->type = INTEL_OUTPUT_LVDS;
 729
 730         drm_encoder_helper_add(encoder, &psb_intel_lvds_helper_funcs);
 731         drm_connector_helper_add(connector,
 732                                  &psb_intel_lvds_connector_helper_funcs);
 733         connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 734         connector->interlace_allowed = false;
 735         connector->doublescan_allowed = false;
 736
 737         /*Attach connector properties*/
 738         drm_object_attach_property(&connector->base,
 739                                       dev->mode_config.scaling_mode_property,
 740                                       DRM_MODE_SCALE_FULLSCREEN);
 741         drm_object_attach_property(&connector->base,
 742                                       dev_priv->backlight_property,
 743                                       BRIGHTNESS_MAX_LEVEL);
 744
 745         /*
 746          * Set up I2C bus
 747          * FIXME: distroy i2c_bus when exit
 748          */
 749         lvds_priv->i2c_bus = psb_intel_i2c_create(dev, GPIOB, "LVDSBLC_B");
 750         if (!lvds_priv->i2c_bus) {
 751                 dev_printk(KERN_ERR,
 752                         &dev->pdev->dev, "I2C bus registration failed.\n");
 753                 goto failed_blc_i2c;
 754         }
 755         lvds_priv->i2c_bus->slave_addr = 0x2C;
 756         dev_priv->lvds_i2c_bus =  lvds_priv->i2c_bus;
 757
 758         /*
 759          * LVDS discovery:
 760          * 1) check for EDID on DDC
 761          * 2) check for VBT data
 762          * 3) check to see if LVDS is already on
 763          *    if none of the above, no panel
 764          * 4) make sure lid is open
 765          *    if closed, act like it's not there for now
 766          */
 767
 768         /* Set up the DDC bus. */
 769         lvds_priv->ddc_bus = psb_intel_i2c_create(dev, GPIOC, "LVDSDDC_C");
 770         if (!lvds_priv->ddc_bus) {
 771                 dev_printk(KERN_ERR, &dev->pdev->dev,
 772                            "DDC bus registration " "failed.\n");
 773                 goto failed_ddc;
 774         }
 775
 776         /*
 777          * Attempt to get the fixed panel mode from DDC.  Assume that the
 778          * preferred mode is the right one.
 779          */
 780         mutex_lock(&dev->mode_config.mutex);
 781         psb_intel_ddc_get_modes(connector, &lvds_priv->ddc_bus->adapter);
 782         list_for_each_entry(scan, &connector->probed_modes, head) {
 783                 if (scan->type & DRM_MODE_TYPE_PREFERRED) {
 784                         mode_dev->panel_fixed_mode =
 785                             drm_mode_duplicate(dev, scan);
 786                         goto out;       /* FIXME: check for quirks */
 787                 }
 788         }
 789
 790         /* Failed to get EDID, what about VBT? do we need this? */
 791         if (mode_dev->vbt_mode)
 792                 mode_dev->panel_fixed_mode =
 793                     drm_mode_duplicate(dev, mode_dev->vbt_mode);
 794
 795         if (!mode_dev->panel_fixed_mode)
 796                 if (dev_priv->lfp_lvds_vbt_mode)
 797                         mode_dev->panel_fixed_mode =
 798                                 drm_mode_duplicate(dev,
 799                                         dev_priv->lfp_lvds_vbt_mode);
 800
 801         /*
 802          * If we didn't get EDID, try checking if the panel is already turned
 803          * on.  If so, assume that whatever is currently programmed is the
 804          * correct mode.
 805          */
 806         lvds = REG_READ(LVDS);
 807         pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
 808         crtc = psb_intel_get_crtc_from_pipe(dev, pipe);
 809
 810         if (crtc && (lvds & LVDS_PORT_EN)) {
 811                 mode_dev->panel_fixed_mode =
 812                     psb_intel_crtc_mode_get(dev, crtc);
 813                 if (mode_dev->panel_fixed_mode) {
 814                         mode_dev->panel_fixed_mode->type |=
 815                             DRM_MODE_TYPE_PREFERRED;
 816                         goto out;       /* FIXME: check for quirks */
 817                 }
 818         }
 819
 820         /* If we still don't have a mode after all that, give up. */
 821         if (!mode_dev->panel_fixed_mode) {
 822                 dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
 823                 goto failed_find;
 824         }
 825
 826         /*
 827          * Blacklist machines with BIOSes that list an LVDS panel without
 828          * actually having one.
 829          */
 830 out:
 831         mutex_unlock(&dev->mode_config.mutex);
 832         drm_connector_register(connector);
 833         return;
 834
 835 failed_find:
 836         mutex_unlock(&dev->mode_config.mutex);
 837         psb_intel_i2c_destroy(lvds_priv->ddc_bus);
 838 failed_ddc:
 839         psb_intel_i2c_destroy(lvds_priv->i2c_bus);
 840 failed_blc_i2c:
 841         drm_encoder_cleanup(encoder);
 842         drm_connector_cleanup(connector);
 843 failed_connector:
 844         kfree(gma_connector);
 845 failed_encoder:
 846         kfree(gma_encoder);
 847 }
 848