drivers/hwmon/Kconfig

   1 #
   2 # I2C Sensor chip drivers configuration
   3 #
   4
   5 menu "Hardware Monitoring support"
   6
   7 config HWMON
   8         tristate "Hardware Monitoring support"
   9         default y
  10         help
  11           Hardware monitoring devices let you monitor the hardware health
  12           of a system. Most modern motherboards include such a device. It
  13           can include temperature sensors, voltage sensors, fan speed
  14           sensors and various additional features such as the ability to
  15           control the speed of the fans.  If you want this support you
  16           should say Y here and also to the specific driver(s) for your
  17           sensors chip(s) below.
  18
  19           This support can also be built as a module.  If so, the module
  20           will be called hwmon.
  21
  22 config HWMON_VID
  23         tristate
  24         default n
  25
  26 config SENSORS_ADM1021
  27         tristate "Analog Devices ADM1021 and compatibles"
  28         depends on HWMON && I2C
  29         help
  30           If you say yes here you get support for Analog Devices ADM1021
  31           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  32           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
  33           and the XEON processor built-in sensor.
  34
  35           This driver can also be built as a module.  If so, the module
  36           will be called adm1021.
  37
  38 config SENSORS_ADM1025
  39         tristate "Analog Devices ADM1025 and compatibles"
  40         depends on HWMON && I2C && EXPERIMENTAL
  41         select HWMON_VID
  42         help
  43           If you say yes here you get support for Analog Devices ADM1025
  44           and Philips NE1619 sensor chips.
  45
  46           This driver can also be built as a module.  If so, the module
  47           will be called adm1025.
  48
  49 config SENSORS_ADM1026
  50         tristate "Analog Devices ADM1026 and compatibles"
  51         depends on HWMON && I2C && EXPERIMENTAL
  52         select HWMON_VID
  53         help
  54           If you say yes here you get support for Analog Devices ADM1026
  55           sensor chip.
  56
  57           This driver can also be built as a module.  If so, the module
  58           will be called adm1026.
  59
  60 config SENSORS_ADM1031
  61         tristate "Analog Devices ADM1031 and compatibles"
  62         depends on HWMON && I2C && EXPERIMENTAL
  63         help
  64           If you say yes here you get support for Analog Devices ADM1031
  65           and ADM1030 sensor chips.
  66
  67           This driver can also be built as a module.  If so, the module
  68           will be called adm1031.
  69
  70 config SENSORS_ADM9240
  71         tristate "Analog Devices ADM9240 and compatibles"
  72         depends on HWMON && I2C && EXPERIMENTAL
  73         select HWMON_VID
  74         help
  75           If you say yes here you get support for Analog Devices ADM9240,
  76           Dallas DS1780, National Semiconductor LM81 sensor chips.
  77
  78           This driver can also be built as a module.  If so, the module
  79           will be called adm9240.
  80
  81 config SENSORS_ASB100
  82         tristate "Asus ASB100 Bach"
  83         depends on HWMON && I2C && EXPERIMENTAL
  84         select HWMON_VID
  85         help
  86           If you say yes here you get support for the ASB100 Bach sensor
  87           chip found on some Asus mainboards.
  88
  89           This driver can also be built as a module.  If so, the module
  90           will be called asb100.
  91
  92 config SENSORS_ATXP1
  93         tristate "Attansic ATXP1 VID controller"
  94         depends on HWMON && I2C && EXPERIMENTAL
  95         select HWMON_VID
  96         help
  97           If you say yes here you get support for the Attansic ATXP1 VID
  98           controller.
  99
 100           If your board have such a chip, you are able to control your CPU
 101           core and other voltages.
 102
 103           This driver can also be built as a module.  If so, the module
 104           will be called atxp1.
 105
 106 config SENSORS_DS1621
 107         tristate "Dallas Semiconductor DS1621 and DS1625"
 108         depends on HWMON && I2C && EXPERIMENTAL
 109         help
 110           If you say yes here you get support for Dallas Semiconductor
 111           DS1621 and DS1625 sensor chips.
 112
 113           This driver can also be built as a module.  If so, the module
 114           will be called ds1621.
 115
 116 config SENSORS_F71805F
 117         tristate "Fintek F71805F/FG"
 118         depends on HWMON && EXPERIMENTAL
 119         help
 120           If you say yes here you get support for hardware monitoring
 121           features of the Fintek F71805F/FG chips.
 122
 123           This driver can also be built as a module.  If so, the module
 124           will be called f71805f.
 125
 126 config SENSORS_FSCHER
 127         tristate "FSC Hermes"
 128         depends on HWMON && I2C && EXPERIMENTAL
 129         help
 130           If you say yes here you get support for Fujitsu Siemens
 131           Computers Hermes sensor chips.
 132
 133           This driver can also be built as a module.  If so, the module
 134           will be called fscher.
 135
 136 config SENSORS_FSCPOS
 137         tristate "FSC Poseidon"
 138         depends on HWMON && I2C && EXPERIMENTAL
 139         help
 140           If you say yes here you get support for Fujitsu Siemens
 141           Computers Poseidon sensor chips.
 142
 143           This driver can also be built as a module.  If so, the module
 144           will be called fscpos.
 145
 146 config SENSORS_GL518SM
 147         tristate "Genesys Logic GL518SM"
 148         depends on HWMON && I2C
 149         help
 150           If you say yes here you get support for Genesys Logic GL518SM
 151           sensor chips.
 152
 153           This driver can also be built as a module.  If so, the module
 154           will be called gl518sm.
 155
 156 config SENSORS_GL520SM
 157         tristate "Genesys Logic GL520SM"
 158         depends on HWMON && I2C && EXPERIMENTAL
 159         select HWMON_VID
 160         help
 161           If you say yes here you get support for Genesys Logic GL520SM
 162           sensor chips.
 163
 164           This driver can also be built as a module.  If so, the module
 165           will be called gl520sm.
 166
 167 config SENSORS_IT87
 168         tristate "ITE IT87xx and compatibles"
 169         depends on HWMON && I2C
 170         select I2C_ISA
 171         select HWMON_VID
 172         help
 173           If you say yes here you get support for ITE IT87xx sensor chips
 174           and clones: SiS960.
 175
 176           This driver can also be built as a module.  If so, the module
 177           will be called it87.
 178
 179 config SENSORS_LM63
 180         tristate "National Semiconductor LM63"
 181         depends on HWMON && I2C && EXPERIMENTAL
 182         help
 183           If you say yes here you get support for the National Semiconductor
 184           LM63 remote diode digital temperature sensor with integrated fan
 185           control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
 186           motherboard, among others.
 187
 188           This driver can also be built as a module.  If so, the module
 189           will be called lm63.
 190
 191 config SENSORS_LM75
 192         tristate "National Semiconductor LM75 and compatibles"
 193         depends on HWMON && I2C
 194         help
 195           If you say yes here you get support for National Semiconductor LM75
 196           sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
 197           9-bit precision mode), and TelCom (now Microchip) TCN75.
 198
 199           The DS75 and DS1775 in 10- to 12-bit precision modes will require
 200           a force module parameter. The driver will not handle the extra
 201           precision anyhow.
 202
 203           This driver can also be built as a module.  If so, the module
 204           will be called lm75.
 205
 206 config SENSORS_LM77
 207         tristate "National Semiconductor LM77"
 208         depends on HWMON && I2C && EXPERIMENTAL
 209         help
 210           If you say yes here you get support for National Semiconductor LM77
 211           sensor chips.
 212
 213           This driver can also be built as a module.  If so, the module
 214           will be called lm77.
 215
 216 config SENSORS_LM78
 217         tristate "National Semiconductor LM78 and compatibles"
 218         depends on HWMON && I2C && EXPERIMENTAL
 219         select I2C_ISA
 220         select HWMON_VID
 221         help
 222           If you say yes here you get support for National Semiconductor LM78,
 223           LM78-J and LM79.
 224
 225           This driver can also be built as a module.  If so, the module
 226           will be called lm78.
 227
 228 config SENSORS_LM80
 229         tristate "National Semiconductor LM80"
 230         depends on HWMON && I2C && EXPERIMENTAL
 231         help
 232           If you say yes here you get support for National Semiconductor
 233           LM80 sensor chips.
 234
 235           This driver can also be built as a module.  If so, the module
 236           will be called lm80.
 237
 238 config SENSORS_LM83
 239         tristate "National Semiconductor LM83"
 240         depends on HWMON && I2C
 241         help
 242           If you say yes here you get support for National Semiconductor
 243           LM83 sensor chips.
 244
 245           This driver can also be built as a module.  If so, the module
 246           will be called lm83.
 247
 248 config SENSORS_LM85
 249         tristate "National Semiconductor LM85 and compatibles"
 250         depends on HWMON && I2C && EXPERIMENTAL
 251         select HWMON_VID
 252         help
 253           If you say yes here you get support for National Semiconductor LM85
 254           sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
 255
 256           This driver can also be built as a module.  If so, the module
 257           will be called lm85.
 258
 259 config SENSORS_LM87
 260         tristate "National Semiconductor LM87"
 261         depends on HWMON && I2C && EXPERIMENTAL
 262         select HWMON_VID
 263         help
 264           If you say yes here you get support for National Semiconductor LM87
 265           sensor chips.
 266
 267           This driver can also be built as a module.  If so, the module
 268           will be called lm87.
 269
 270 config SENSORS_LM90
 271         tristate "National Semiconductor LM90 and compatibles"
 272         depends on HWMON && I2C
 273         help
 274           If you say yes here you get support for National Semiconductor LM90,
 275           LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
 276           MAX6658 sensor chips.
 277
 278           The Analog Devices ADT7461 sensor chip is also supported, but only
 279           if found in ADM1032 compatibility mode.
 280
 281           This driver can also be built as a module.  If so, the module
 282           will be called lm90.
 283
 284 config SENSORS_LM92
 285         tristate "National Semiconductor LM92 and compatibles"
 286         depends on HWMON && I2C && EXPERIMENTAL
 287         help
 288           If you say yes here you get support for National Semiconductor LM92
 289           and Maxim MAX6635 sensor chips.
 290
 291           This driver can also be built as a module.  If so, the module
 292           will be called lm92.
 293
 294 config SENSORS_MAX1619
 295         tristate "Maxim MAX1619 sensor chip"
 296         depends on HWMON && I2C && EXPERIMENTAL
 297         help
 298           If you say yes here you get support for MAX1619 sensor chip.
 299
 300           This driver can also be built as a module.  If so, the module
 301           will be called max1619.
 302
 303 config SENSORS_PC87360
 304         tristate "National Semiconductor PC87360 family"
 305         depends on HWMON && I2C && EXPERIMENTAL
 306         select I2C_ISA
 307         select HWMON_VID
 308         help
 309           If you say yes here you get access to the hardware monitoring
 310           functions of the National Semiconductor PC8736x Super-I/O chips.
 311           The PC87360, PC87363 and PC87364 only have fan monitoring and
 312           control.  The PC87365 and PC87366 additionally have voltage and
 313           temperature monitoring.
 314
 315           This driver can also be built as a module.  If so, the module
 316           will be called pc87360.
 317
 318 config SENSORS_SIS5595
 319         tristate "Silicon Integrated Systems Corp. SiS5595"
 320         depends on HWMON && I2C && PCI && EXPERIMENTAL
 321         select I2C_ISA
 322         help
 323           If you say yes here you get support for the integrated sensors in
 324           SiS5595 South Bridges.
 325
 326           This driver can also be built as a module.  If so, the module
 327           will be called sis5595.
 328
 329 config SENSORS_SMSC47M1
 330         tristate "SMSC LPC47M10x and compatibles"
 331         depends on HWMON && I2C && EXPERIMENTAL
 332         select I2C_ISA
 333         help
 334           If you say yes here you get support for the integrated fan
 335           monitoring and control capabilities of the SMSC LPC47B27x,
 336           LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
 337
 338           This driver can also be built as a module.  If so, the module
 339           will be called smsc47m1.
 340
 341 config SENSORS_SMSC47B397
 342         tristate "SMSC LPC47B397-NC"
 343         depends on HWMON && I2C && EXPERIMENTAL
 344         select I2C_ISA
 345         help
 346           If you say yes here you get support for the SMSC LPC47B397-NC
 347           sensor chip.
 348
 349           This driver can also be built as a module.  If so, the module
 350           will be called smsc47b397.
 351
 352 config SENSORS_VIA686A
 353         tristate "VIA686A"
 354         depends on HWMON && I2C && PCI
 355         select I2C_ISA
 356         help
 357           If you say yes here you get support for the integrated sensors in
 358           Via 686A/B South Bridges.
 359
 360           This driver can also be built as a module.  If so, the module
 361           will be called via686a.
 362
 363 config SENSORS_VT8231
 364         tristate "VT8231"
 365         depends on HWMON && I2C && PCI && EXPERIMENTAL
 366         select HWMON_VID
 367         select I2C_ISA
 368         help
 369           If you say yes here then you get support for the integrated sensors
 370           in the VIA VT8231 device.
 371
 372           This driver can also be built as a module.  If so, the module
 373           will be called vt8231.
 374
 375 config SENSORS_W83781D
 376         tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
 377         depends on HWMON && I2C
 378         select I2C_ISA
 379         select HWMON_VID
 380         help
 381           If you say yes here you get support for the Winbond W8378x series
 382           of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
 383           and the similar Asus AS99127F.
 384
 385           This driver can also be built as a module.  If so, the module
 386           will be called w83781d.
 387
 388 config SENSORS_W83792D
 389         tristate "Winbond W83792D"
 390         depends on HWMON && I2C && EXPERIMENTAL
 391         help
 392           If you say yes here you get support for the Winbond W83792D chip.
 393
 394           This driver can also be built as a module.  If so, the module
 395           will be called w83792d.
 396
 397 config SENSORS_W83L785TS
 398         tristate "Winbond W83L785TS-S"
 399         depends on HWMON && I2C && EXPERIMENTAL
 400         help
 401           If you say yes here you get support for the Winbond W83L785TS-S
 402           sensor chip, which is used on the Asus A7N8X, among other
 403           motherboards.
 404
 405           This driver can also be built as a module.  If so, the module
 406           will be called w83l785ts.
 407
 408 config SENSORS_W83627HF
 409         tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
 410         depends on HWMON && I2C && EXPERIMENTAL
 411         select I2C_ISA
 412         select HWMON_VID
 413         help
 414           If you say yes here you get support for the Winbond W836X7 series
 415           of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
 416
 417           This driver can also be built as a module.  If so, the module
 418           will be called w83627hf.
 419
 420 config SENSORS_W83627EHF
 421         tristate "Winbond W83627EHF"
 422         depends on HWMON && I2C && EXPERIMENTAL
 423         select I2C_ISA
 424         help
 425           If you say yes here you get preliminary support for the hardware
 426           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
 427           Only fan and temperature inputs are supported at the moment, while
 428           the chip does much more than that.
 429
 430           This driver also supports the W83627EHG, which is the lead-free
 431           version of the W83627EHF.
 432
 433           This driver can also be built as a module.  If so, the module
 434           will be called w83627ehf.
 435
 436 config SENSORS_HDAPS
 437         tristate "IBM Hard Drive Active Protection System (hdaps)"
 438         depends on HWMON && INPUT && X86
 439         default n
 440         help
 441           This driver provides support for the IBM Hard Drive Active Protection
 442           System (hdaps), which provides an accelerometer and other misc. data.
 443           ThinkPads starting with the R50, T41, and X40 are supported.  The
 444           accelerometer data is readable via sysfs.
 445
 446           This driver also provides an absolute input class device, allowing
 447           the laptop to act as a pinball machine-esque joystick.
 448
 449           Say Y here if you have an applicable laptop and want to experience
 450           the awesome power of hdaps.
 451
 452 config HWMON_DEBUG_CHIP
 453         bool "Hardware Monitoring Chip debugging messages"
 454         depends on HWMON
 455         default n
 456         help
 457           Say Y here if you want the I2C chip drivers to produce a bunch of
 458           debug messages to the system log.  Select this if you are having
 459           a problem with I2C support and want to see more of what is going
 460           on.
 461
 462 endmenu