drivers/iio/magnetometer/Kconfig

   1 #
   2 # Magnetometer sensors
   3 #
   4 # When adding new entries keep the list in alphabetical order
   5
   6 menu "Magnetometer sensors"
   7
   8 config AK8974
   9         tristate "Asahi Kasei AK8974 3-Axis Magnetometer"
  10         depends on I2C
  11         depends on OF
  12         select REGMAP_I2C
  13         select IIO_BUFFER
  14         select IIO_TRIGGERED_BUFFER
  15         help
  16           Say yes here to build support for Asahi Kasei AK8974 or
  17           AMI305 I2C-based 3-axis magnetometer chips.
  18
  19           To compile this driver as a module, choose M here: the module
  20           will be called ak8974.
  21
  22 config AK8975
  23         tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
  24         depends on I2C
  25         depends on GPIOLIB || COMPILE_TEST
  26         select IIO_BUFFER
  27         select IIO_TRIGGERED_BUFFER
  28         help
  29           Say yes here to build support for Asahi Kasei AK8975, AK8963,
  30           AK09911 or AK09912 3-Axis Magnetometer.
  31
  32           To compile this driver as a module, choose M here: the module
  33           will be called ak8975.
  34
  35 config AK09911
  36         tristate "Asahi Kasei AK09911 3-axis Compass"
  37         depends on I2C
  38         depends on GPIOLIB || COMPILE_TEST
  39         select AK8975
  40         help
  41           Deprecated: AK09911 is now supported by AK8975 driver.
  42
  43 config BMC150_MAGN
  44         tristate
  45         select IIO_BUFFER
  46         select IIO_TRIGGERED_BUFFER
  47
  48 config BMC150_MAGN_I2C
  49         tristate "Bosch BMC150 I2C Magnetometer Driver"
  50         depends on I2C
  51         select BMC150_MAGN
  52         select REGMAP_I2C
  53         help
  54           Say yes here to build support for the BMC150 magnetometer with
  55           I2C interface.
  56
  57           This is a combo module with both accelerometer and magnetometer.
  58           This driver is only implementing magnetometer part, which has
  59           its own address and register map.
  60
  61           This driver also supports I2C Bosch BMC156 and BMM150 chips.
  62           To compile this driver as a module, choose M here: the module will be
  63           called bmc150_magn_i2c.
  64
  65 config BMC150_MAGN_SPI
  66         tristate "Bosch BMC150 SPI Magnetometer Driver"
  67         depends on SPI
  68         select BMC150_MAGN
  69         select REGMAP_SPI
  70         help
  71           Say yes here to build support for the BMC150 magnetometer with
  72           SPI interface.
  73
  74           This is a combo module with both accelerometer and magnetometer.
  75           This driver is only implementing magnetometer part, which has
  76           its own address and register map.
  77
  78           This driver also supports SPI Bosch BMC156 and BMM150 chips.
  79           To compile this driver as a module, choose M here: the module will be
  80           called bmc150_magn_spi.
  81
  82 config MAG3110
  83         tristate "Freescale MAG3110 3-Axis Magnetometer"
  84         depends on I2C
  85         select IIO_BUFFER
  86         select IIO_TRIGGERED_BUFFER
  87         help
  88           Say yes here to build support for the Freescale MAG3110 3-Axis
  89           magnetometer.
  90
  91           To compile this driver as a module, choose M here: the module
  92           will be called mag3110.
  93
  94 config HID_SENSOR_MAGNETOMETER_3D
  95         depends on HID_SENSOR_HUB
  96         select IIO_BUFFER
  97         select IIO_TRIGGERED_BUFFER
  98         select HID_SENSOR_IIO_COMMON
  99         select HID_SENSOR_IIO_TRIGGER
 100         tristate "HID Magenetometer 3D"
 101         help
 102           Say yes here to build support for the HID SENSOR
 103           Magnetometer 3D.
 104
 105 config MMC35240
 106         tristate "MEMSIC MMC35240 3-axis magnetic sensor"
 107         select REGMAP_I2C
 108         depends on I2C
 109         help
 110           Say yes here to build support for the MEMSIC MMC35240 3-axis
 111           magnetic sensor.
 112
 113           To compile this driver as a module, choose M here: the module
 114           will be called mmc35240.
 115
 116 config IIO_ST_MAGN_3AXIS
 117         tristate "STMicroelectronics magnetometers 3-Axis Driver"
 118         depends on (I2C || SPI_MASTER) && SYSFS
 119         select IIO_ST_SENSORS_CORE
 120         select IIO_ST_MAGN_I2C_3AXIS if (I2C)
 121         select IIO_ST_MAGN_SPI_3AXIS if (SPI_MASTER)
 122         select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
 123         help
 124           Say yes here to build support for STMicroelectronics magnetometers:
 125           LSM303DLHC, LSM303DLM, LIS3MDL.
 126
 127           This driver can also be built as a module. If so, these modules
 128           will be created:
 129           - st_magn (core functions for the driver [it is mandatory]);
 130           - st_magn_i2c (necessary for the I2C devices [optional*]);
 131           - st_magn_spi (necessary for the SPI devices [optional*]);
 132
 133           (*) one of these is necessary to do something.
 134
 135 config IIO_ST_MAGN_I2C_3AXIS
 136         tristate
 137         depends on IIO_ST_MAGN_3AXIS
 138         depends on IIO_ST_SENSORS_I2C
 139
 140 config IIO_ST_MAGN_SPI_3AXIS
 141         tristate
 142         depends on IIO_ST_MAGN_3AXIS
 143         depends on IIO_ST_SENSORS_SPI
 144
 145 config SENSORS_HMC5843
 146         tristate
 147         select IIO_BUFFER
 148         select IIO_TRIGGERED_BUFFER
 149
 150 config SENSORS_HMC5843_I2C
 151         tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)"
 152         depends on I2C
 153         select SENSORS_HMC5843
 154         select REGMAP_I2C
 155         help
 156           Say Y here to add support for the Honeywell HMC5843, HMC5883 and
 157           HMC5883L 3-Axis Magnetometer (digital compass).
 158
 159           This driver can also be compiled as a set of modules.
 160           If so, these modules will be created:
 161           - hmc5843_core (core functions)
 162           - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983)
 163
 164 config SENSORS_HMC5843_SPI
 165         tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)"
 166         depends on SPI_MASTER
 167         select SENSORS_HMC5843
 168         select REGMAP_SPI
 169         help
 170           Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer
 171           (digital compass).
 172
 173           This driver can also be compiled as a set of modules.
 174           If so, these modules will be created:
 175           - hmc5843_core (core functions)
 176           - hmc5843_spi (support for HMC5983)
 177
 178 endmenu