drivers/input/keyboard/Kconfig

   1 #
   2 # Input core configuration
   3 #
   4 menuconfig INPUT_KEYBOARD
   5         bool "Keyboards"
   6         default y
   7         help
   8           Say Y here, and a list of supported keyboards will be displayed.
   9           This option doesn't affect the kernel.
  10
  11           If unsure, say Y.
  12
  13 if INPUT_KEYBOARD
  14
  15 config KEYBOARD_ADP5520
  16         tristate "Keypad Support for ADP5520 PMIC"
  17         depends on PMIC_ADP5520
  18         help
  19           This option enables support for the keypad scan matrix
  20           on Analog Devices ADP5520 PMICs.
  21
  22           To compile this driver as a module, choose M here: the module will
  23           be called adp5520-keys.
  24
  25 config KEYBOARD_ADP5588
  26         tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
  27         depends on I2C
  28         help
  29           Say Y here if you want to use a ADP5588/87 attached to your
  30           system I2C bus.
  31
  32           To compile this driver as a module, choose M here: the
  33           module will be called adp5588-keys.
  34
  35 config KEYBOARD_ADP5589
  36         tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander"
  37         depends on I2C
  38         help
  39           Say Y here if you want to use a ADP5585/ADP5589 attached to your
  40           system I2C bus.
  41
  42           To compile this driver as a module, choose M here: the
  43           module will be called adp5589-keys.
  44
  45 config KEYBOARD_AMIGA
  46         tristate "Amiga keyboard"
  47         depends on AMIGA
  48         help
  49           Say Y here if you are running Linux on any AMIGA and have a keyboard
  50           attached.
  51
  52           To compile this driver as a module, choose M here: the
  53           module will be called amikbd.
  54
  55 config ATARI_KBD_CORE
  56         bool
  57
  58 config KEYBOARD_ATARI
  59         tristate "Atari keyboard"
  60         depends on ATARI
  61         select ATARI_KBD_CORE
  62         help
  63           Say Y here if you are running Linux on any Atari and have a keyboard
  64           attached.
  65
  66           To compile this driver as a module, choose M here: the
  67           module will be called atakbd.
  68
  69 config KEYBOARD_ATKBD
  70         tristate "AT keyboard"
  71         default y
  72         select SERIO
  73         select SERIO_LIBPS2
  74         select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO
  75         select SERIO_GSCPS2 if GSC
  76         help
  77           Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
  78           you'll need this, unless you have a different type keyboard (USB, ADB
  79           or other). This also works for AT and PS/2 keyboards connected over a
  80           PS/2 to serial converter.
  81
  82           If unsure, say Y.
  83
  84           To compile this driver as a module, choose M here: the
  85           module will be called atkbd.
  86
  87 config KEYBOARD_ATKBD_HP_KEYCODES
  88         bool "Use HP keyboard scancodes"
  89         depends on PARISC && KEYBOARD_ATKBD
  90         default y
  91         help
  92           Say Y here if you have a PA-RISC machine and want to use an AT or
  93           PS/2 keyboard, and your keyboard uses keycodes that are specific to
  94           PA-RISC keyboards.
  95
  96           Say N if you use a standard keyboard.
  97
  98 config KEYBOARD_ATKBD_RDI_KEYCODES
  99         bool "Use PrecisionBook keyboard scancodes"
 100         depends on KEYBOARD_ATKBD_HP_KEYCODES
 101         default n
 102         help
 103           If you have an RDI PrecisionBook, say Y here if you want to use its
 104           built-in keyboard (as opposed to an external keyboard).
 105
 106           The PrecisionBook has five keys that conflict with those used by most
 107           AT and PS/2 keyboards. These are as follows:
 108
 109             PrecisionBook    Standard AT or PS/2
 110
 111             F1               F12
 112             Left Ctrl        Left Alt
 113             Caps Lock        Left Ctrl
 114             Right Ctrl       Caps Lock
 115             Left             102nd key (the key to the right of Left Shift)
 116
 117           If you say N here, and use the PrecisionBook keyboard, then each key
 118           in the left-hand column will be interpreted as the corresponding key
 119           in the right-hand column.
 120
 121           If you say Y here, and use an external keyboard, then each key in the
 122           right-hand column will be interpreted as the key shown in the
 123           left-hand column.
 124
 125 config KEYBOARD_QT1070
 126        tristate "Atmel AT42QT1070 Touch Sensor Chip"
 127        depends on I2C
 128        help
 129          Say Y here if you want to use Atmel AT42QT1070 QTouch
 130          Sensor chip as input device.
 131
 132          To compile this driver as a module, choose M here:
 133          the module will be called qt1070
 134
 135 config KEYBOARD_QT2160
 136         tristate "Atmel AT42QT2160 Touch Sensor Chip"
 137         depends on I2C
 138         help
 139           If you say yes here you get support for Atmel AT42QT2160 Touch
 140           Sensor chip as a keyboard input.
 141
 142           This driver can also be built as a module. If so, the module
 143           will be called qt2160.
 144
 145 config KEYBOARD_BFIN
 146         tristate "Blackfin BF54x keypad support"
 147         depends on (BF54x && !BF544)
 148         help
 149           Say Y here if you want to use the BF54x keypad.
 150
 151           To compile this driver as a module, choose M here: the
 152           module will be called bf54x-keys.
 153
 154 config KEYBOARD_CLPS711X
 155         tristate "CLPS711X Keypad support"
 156         depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST)
 157         select INPUT_MATRIXKMAP
 158         select INPUT_POLLDEV
 159         help
 160           Say Y here to enable the matrix keypad on the Cirrus Logic
 161           CLPS711X CPUs.
 162
 163           To compile this driver as a module, choose M here: the
 164           module will be called clps711x-keypad.
 165
 166 config KEYBOARD_LKKBD
 167         tristate "DECstation/VAXstation LK201/LK401 keyboard"
 168         select SERIO
 169         help
 170           Say Y here if you want to use a LK201 or LK401 style serial
 171           keyboard. This keyboard is also useable on PCs if you attach
 172           it with the inputattach program. The connector pinout is
 173           described within lkkbd.c.
 174
 175           To compile this driver as a module, choose M here: the
 176           module will be called lkkbd.
 177
 178 config KEYBOARD_EP93XX
 179         tristate "EP93xx Matrix Keypad support"
 180         depends on ARCH_EP93XX
 181         select INPUT_MATRIXKMAP
 182         help
 183           Say Y here to enable the matrix keypad on the Cirrus EP93XX.
 184
 185           To compile this driver as a module, choose M here: the
 186           module will be called ep93xx_keypad.
 187
 188 config KEYBOARD_GPIO
 189         tristate "GPIO Buttons"
 190         depends on GPIOLIB || COMPILE_TEST
 191         help
 192           This driver implements support for buttons connected
 193           to GPIO pins of various CPUs (and some other chips).
 194
 195           Say Y here if your device has buttons connected
 196           directly to such GPIO pins.  Your board-specific
 197           setup logic must also provide a platform device,
 198           with configuration data saying which GPIOs are used.
 199
 200           To compile this driver as a module, choose M here: the
 201           module will be called gpio_keys.
 202
 203 config KEYBOARD_GPIO_POLLED
 204         tristate "Polled GPIO buttons"
 205         depends on GPIOLIB
 206         select INPUT_POLLDEV
 207         help
 208           This driver implements support for buttons connected
 209           to GPIO pins that are not capable of generating interrupts.
 210
 211           Say Y here if your device has buttons connected
 212           directly to such GPIO pins.  Your board-specific
 213           setup logic must also provide a platform device,
 214           with configuration data saying which GPIOs are used.
 215
 216           To compile this driver as a module, choose M here: the
 217           module will be called gpio_keys_polled.
 218
 219 config KEYBOARD_TCA6416
 220         tristate "TCA6416/TCA6408A Keypad Support"
 221         depends on I2C
 222         help
 223           This driver implements basic keypad functionality
 224           for keys connected through TCA6416/TCA6408A IO expanders.
 225
 226           Say Y here if your device has keys connected to
 227           TCA6416/TCA6408A IO expander. Your board-specific setup logic
 228           must also provide pin-mask details(of which TCA6416 pins
 229           are used for keypad).
 230
 231           If enabled the entire TCA6416 device will be managed through
 232           this driver.
 233
 234           To compile this driver as a module, choose M here: the
 235           module will be called tca6416_keypad.
 236
 237 config KEYBOARD_TCA8418
 238         tristate "TCA8418 Keypad Support"
 239         depends on I2C
 240         select INPUT_MATRIXKMAP
 241         help
 242           This driver implements basic keypad functionality
 243           for keys connected through TCA8418 keypad decoder.
 244
 245           Say Y here if your device has keys connected to
 246           TCA8418 keypad decoder.
 247
 248           If enabled the complete TCA8418 device will be managed through
 249           this driver.
 250
 251           To compile this driver as a module, choose M here: the
 252           module will be called tca8418_keypad.
 253
 254 config KEYBOARD_MATRIX
 255         tristate "GPIO driven matrix keypad support"
 256         depends on GPIOLIB || COMPILE_TEST
 257         select INPUT_MATRIXKMAP
 258         help
 259           Enable support for GPIO driven matrix keypad.
 260
 261           To compile this driver as a module, choose M here: the
 262           module will be called matrix_keypad.
 263
 264 config KEYBOARD_HIL_OLD
 265         tristate "HP HIL keyboard support (simple driver)"
 266         depends on GSC || HP300
 267         default y
 268         help
 269           The "Human Interface Loop" is a older, 8-channel USB-like
 270           controller used in several Hewlett Packard models. This driver
 271           was adapted from the one written for m68k/hp300, and implements
 272           support for a keyboard attached to the HIL port, but not for
 273           any other types of HIL input devices like mice or tablets.
 274           However, it has been thoroughly tested and is stable.
 275
 276           If you want full HIL support including support for multiple
 277           keyboards, mice, and tablets, you have to enable the
 278           "HP System Device Controller i8042 Support" in the input/serio
 279           submenu.
 280
 281 config KEYBOARD_HIL
 282         tristate "HP HIL keyboard/pointer support"
 283         depends on GSC || HP300
 284         default y
 285         select HP_SDC
 286         select HIL_MLC
 287         select SERIO
 288         help
 289           The "Human Interface Loop" is a older, 8-channel USB-like
 290           controller used in several Hewlett Packard models.
 291           This driver implements support for HIL-keyboards and pointing
 292           devices (mice, tablets, touchscreens) attached
 293           to your machine, so normally you should say Y here.
 294
 295 config KEYBOARD_HP6XX
 296         tristate "HP Jornada 6xx keyboard"
 297         depends on SH_HP6XX
 298         select INPUT_POLLDEV
 299         help
 300           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 301           support the built-in keyboard.
 302
 303           To compile this driver as a module, choose M here: the
 304           module will be called jornada680_kbd.
 305
 306 config KEYBOARD_HP7XX
 307         tristate "HP Jornada 7xx keyboard"
 308         depends on SA1100_JORNADA720_SSP && SA1100_SSP
 309         help
 310           Say Y here if you have a HP Jornada 710/720/728 and want to
 311           support the built-in keyboard.
 312
 313           To compile this driver as a module, choose M here: the
 314           module will be called jornada720_kbd.
 315
 316 config KEYBOARD_LM8323
 317         tristate "LM8323 keypad chip"
 318         depends on I2C
 319         depends on LEDS_CLASS
 320         help
 321           If you say yes here you get support for the National Semiconductor
 322           LM8323 keypad controller.
 323
 324           To compile this driver as a module, choose M here: the
 325           module will be called lm8323.
 326
 327 config KEYBOARD_LM8333
 328         tristate "LM8333 keypad chip"
 329         depends on I2C
 330         select INPUT_MATRIXKMAP
 331         help
 332           If you say yes here you get support for the National Semiconductor
 333           LM8333 keypad controller.
 334
 335           To compile this driver as a module, choose M here: the
 336           module will be called lm8333.
 337
 338 config KEYBOARD_LOCOMO
 339         tristate "LoCoMo Keyboard Support"
 340         depends on SHARP_LOCOMO
 341         help
 342           Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
 343
 344           To compile this driver as a module, choose M here: the
 345           module will be called locomokbd.
 346
 347 config KEYBOARD_LPC32XX
 348         tristate "LPC32XX matrix key scanner support"
 349         depends on ARCH_LPC32XX && OF
 350         select INPUT_MATRIXKMAP
 351         help
 352           Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
 353           connected to a key matrix.
 354
 355           To compile this driver as a module, choose M here: the
 356           module will be called lpc32xx-keys.
 357
 358 config KEYBOARD_MAPLE
 359         tristate "Maple bus keyboard"
 360         depends on SH_DREAMCAST && MAPLE
 361         help
 362           Say Y here if you have a Dreamcast console running Linux and have
 363           a keyboard attached to its Maple bus.
 364
 365           To compile this driver as a module, choose M here: the
 366           module will be called maple_keyb.
 367
 368 config KEYBOARD_MAX7359
 369         tristate "Maxim MAX7359 Key Switch Controller"
 370         select INPUT_MATRIXKMAP
 371         depends on I2C
 372         help
 373           If you say yes here you get support for the Maxim MAX7359 Key
 374           Switch Controller chip. This providers microprocessors with
 375           management of up to 64 key switches
 376
 377           To compile this driver as a module, choose M here: the
 378           module will be called max7359_keypad.
 379
 380 config KEYBOARD_MCS
 381         tristate "MELFAS MCS Touchkey"
 382         depends on I2C
 383         help
 384           Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
 385           chip in your system.
 386
 387           If unsure, say N.
 388
 389           To compile this driver as a module, choose M here: the
 390           module will be called mcs_touchkey.
 391
 392 config KEYBOARD_MPR121
 393         tristate "Freescale MPR121 Touchkey"
 394         depends on I2C
 395         help
 396           Say Y here if you have Freescale MPR121 touchkey controller
 397           chip in your system.
 398
 399           If unsure, say N.
 400
 401           To compile this driver as a module, choose M here: the
 402           module will be called mpr121_touchkey.
 403
 404 config KEYBOARD_SNVS_PWRKEY
 405         tristate "IMX SNVS Power Key Driver"
 406         depends on SOC_IMX6SX
 407         depends on OF
 408         help
 409           This is the snvs powerkey driver for the Freescale i.MX application
 410           processors that are newer than i.MX6 SX.
 411
 412           To compile this driver as a module, choose M here; the
 413           module will be called snvs_pwrkey.
 414
 415 config KEYBOARD_IMX
 416         tristate "IMX keypad support"
 417         depends on ARCH_MXC
 418         select INPUT_MATRIXKMAP
 419         help
 420           Enable support for IMX keypad port.
 421
 422           To compile this driver as a module, choose M here: the
 423           module will be called imx_keypad.
 424
 425 config KEYBOARD_NEWTON
 426         tristate "Newton keyboard"
 427         select SERIO
 428         help
 429           Say Y here if you have a Newton keyboard on a serial port.
 430
 431           To compile this driver as a module, choose M here: the
 432           module will be called newtonkbd.
 433
 434 config KEYBOARD_NOMADIK
 435         tristate "ST-Ericsson Nomadik SKE keyboard"
 436         depends on (ARCH_NOMADIK || ARCH_U8500)
 437         select INPUT_MATRIXKMAP
 438         help
 439           Say Y here if you want to use a keypad provided on the SKE controller
 440           used on the Ux500 and Nomadik platforms
 441
 442           To compile this driver as a module, choose M here: the
 443           module will be called nmk-ske-keypad.
 444
 445 config KEYBOARD_NSPIRE
 446         tristate "TI-NSPIRE built-in keyboard"
 447         depends on ARCH_NSPIRE && OF
 448         select INPUT_MATRIXKMAP
 449         help
 450           Say Y here if you want to use the built-in keypad on TI-NSPIRE.
 451
 452           To compile this driver as a module, choose M here: the
 453           module will be called nspire-keypad.
 454
 455 config KEYBOARD_TEGRA
 456         tristate "NVIDIA Tegra internal matrix keyboard controller support"
 457         depends on ARCH_TEGRA && OF
 458         select INPUT_MATRIXKMAP
 459         help
 460           Say Y here if you want to use a matrix keyboard connected directly
 461           to the internal keyboard controller on Tegra SoCs.
 462
 463           To compile this driver as a module, choose M here: the
 464           module will be called tegra-kbc.
 465
 466 config KEYBOARD_OPENCORES
 467         tristate "OpenCores Keyboard Controller"
 468         depends on HAS_IOMEM
 469         help
 470           Say Y here if you want to use the OpenCores Keyboard Controller
 471           http://www.opencores.org/project,keyboardcontroller
 472
 473           To compile this driver as a module, choose M here; the
 474           module will be called opencores-kbd.
 475
 476 config KEYBOARD_PXA27x
 477         tristate "PXA27x/PXA3xx keypad support"
 478         depends on PXA27x || PXA3xx || ARCH_MMP
 479         select INPUT_MATRIXKMAP
 480         help
 481           Enable support for PXA27x/PXA3xx keypad controller.
 482
 483           To compile this driver as a module, choose M here: the
 484           module will be called pxa27x_keypad.
 485
 486 config KEYBOARD_PXA930_ROTARY
 487         tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
 488         depends on CPU_PXA930 || CPU_PXA935
 489         help
 490           Enable support for PXA930/PXA935 Enhanced Rotary Controller.
 491
 492           To compile this driver as a module, choose M here: the
 493           module will be called pxa930_rotary.
 494
 495 config KEYBOARD_PMIC8XXX
 496         tristate "Qualcomm PMIC8XXX keypad support"
 497         depends on MFD_PM8XXX
 498         select INPUT_MATRIXKMAP
 499         help
 500           Say Y here if you want to enable the driver for the PMIC8XXX
 501           keypad provided as a reference design from Qualcomm. This is intended
 502           to support upto 18x8 matrix based keypad design.
 503
 504           To compile this driver as a module, choose M here: the module will
 505           be called pmic8xxx-keypad.
 506
 507 config KEYBOARD_SAMSUNG
 508         tristate "Samsung keypad support"
 509         depends on HAVE_CLK
 510         select INPUT_MATRIXKMAP
 511         help
 512           Say Y here if you want to use the keypad on your Samsung mobile
 513           device.
 514
 515           To compile this driver as a module, choose M here: the
 516           module will be called samsung-keypad.
 517
 518 config KEYBOARD_GOLDFISH_EVENTS
 519         depends on GOLDFISH || COMPILE_TEST
 520         tristate "Generic Input Event device for Goldfish"
 521         help
 522           Say Y here to get an input event device for the Goldfish virtual
 523           device emulator.
 524
 525           To compile this driver as a module, choose M here: the
 526           module will be called goldfish-events.
 527
 528 config KEYBOARD_STOWAWAY
 529         tristate "Stowaway keyboard"
 530         select SERIO
 531         help
 532           Say Y here if you have a Stowaway keyboard on a serial port.
 533           Stowaway compatible keyboards like Dicota Input-PDA keyboard
 534           are also supported by this driver.
 535
 536           To compile this driver as a module, choose M here: the
 537           module will be called stowaway.
 538
 539 config KEYBOARD_ST_KEYSCAN
 540         tristate "STMicroelectronics keyscan support"
 541         depends on ARCH_STI || COMPILE_TEST
 542         select INPUT_MATRIXKMAP
 543         help
 544           Say Y here if you want to use a keypad attached to the keyscan block
 545           on some STMicroelectronics SoC devices.
 546
 547           To compile this driver as a module, choose M here: the
 548           module will be called st-keyscan.
 549
 550 config KEYBOARD_SUNKBD
 551         tristate "Sun Type 4 and Type 5 keyboard"
 552         select SERIO
 553         help
 554           Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
 555           connected either to the Sun keyboard connector or to an serial
 556           (RS-232) port via a simple adapter.
 557
 558           To compile this driver as a module, choose M here: the
 559           module will be called sunkbd.
 560
 561 config KEYBOARD_SH_KEYSC
 562         tristate "SuperH KEYSC keypad support"
 563         depends on ARCH_SHMOBILE || COMPILE_TEST
 564         help
 565           Say Y here if you want to use a keypad attached to the KEYSC block
 566           on SuperH processors such as sh7722 and sh7343.
 567
 568           To compile this driver as a module, choose M here: the
 569           module will be called sh_keysc.
 570
 571 config KEYBOARD_STMPE
 572         tristate "STMPE keypad support"
 573         depends on MFD_STMPE
 574         depends on OF
 575         select INPUT_MATRIXKMAP
 576         help
 577           Say Y here if you want to use the keypad controller on STMPE I/O
 578           expanders.
 579
 580           To compile this driver as a module, choose M here: the module will be
 581           called stmpe-keypad.
 582
 583 config KEYBOARD_SUN4I_LRADC
 584         tristate "Allwinner sun4i low res adc attached tablet keys support"
 585         depends on ARCH_SUNXI
 586         help
 587           This selects support for the Allwinner low res adc attached tablet
 588           keys found on Allwinner sunxi SoCs.
 589
 590           To compile this driver as a module, choose M here: the
 591           module will be called sun4i-lradc-keys.
 592
 593 config KEYBOARD_DAVINCI
 594         tristate "TI DaVinci Key Scan"
 595         depends on ARCH_DAVINCI_DM365
 596         help
 597           Say Y to enable keypad module support for the TI DaVinci
 598           platforms (DM365).
 599
 600           To compile this driver as a module, choose M here: the
 601           module will be called davinci_keyscan.
 602
 603 config KEYBOARD_IPAQ_MICRO
 604         tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
 605         depends on MFD_IPAQ_MICRO
 606         help
 607           Say Y to enable support for the buttons attached to
 608           Micro peripheral controller on iPAQ h3100/h3600/h3700
 609
 610           To compile this driver as a module, choose M here: the
 611           module will be called ipaq-micro-keys.
 612
 613 config KEYBOARD_OMAP
 614         tristate "TI OMAP keypad support"
 615         depends on ARCH_OMAP1
 616         select INPUT_MATRIXKMAP
 617         help
 618           Say Y here if you want to use the OMAP keypad.
 619
 620           To compile this driver as a module, choose M here: the
 621           module will be called omap-keypad.
 622
 623 config KEYBOARD_OMAP4
 624         tristate "TI OMAP4+ keypad support"
 625         depends on OF || ARCH_OMAP2PLUS
 626         select INPUT_MATRIXKMAP
 627         help
 628           Say Y here if you want to use the OMAP4+ keypad.
 629
 630           To compile this driver as a module, choose M here: the
 631           module will be called omap4-keypad.
 632
 633 config KEYBOARD_SPEAR
 634         tristate "ST SPEAR keyboard support"
 635         depends on PLAT_SPEAR
 636         select INPUT_MATRIXKMAP
 637         help
 638           Say Y here if you want to use the SPEAR keyboard.
 639
 640           To compile this driver as a module, choose M here: the
 641           module will be called spear-keboard.
 642
 643 config KEYBOARD_TC3589X
 644         tristate "TC3589X Keypad support"
 645         depends on MFD_TC3589X
 646         select INPUT_MATRIXKMAP
 647         help
 648           Say Y here if you want to use the keypad controller on
 649           TC35892/3 I/O expander.
 650
 651           To compile this driver as a module, choose M here: the
 652           module will be called tc3589x-keypad.
 653
 654 config KEYBOARD_TWL4030
 655         tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
 656         depends on TWL4030_CORE
 657         select INPUT_MATRIXKMAP
 658         help
 659           Say Y here if your board use the keypad controller on
 660           TWL4030 family chips.  It's safe to say enable this
 661           even on boards that don't use the keypad controller.
 662
 663           To compile this driver as a module, choose M here: the
 664           module will be called twl4030_keypad.
 665
 666 config KEYBOARD_XTKBD
 667         tristate "XT keyboard"
 668         select SERIO
 669         help
 670           Say Y here if you want to use the old IBM PC/XT keyboard (or
 671           compatible) on your system. This is only possible with a
 672           parallel port keyboard adapter, you cannot connect it to the
 673           keyboard port on a PC that runs Linux.
 674
 675           To compile this driver as a module, choose M here: the
 676           module will be called xtkbd.
 677
 678 config KEYBOARD_W90P910
 679         tristate "W90P910 Matrix Keypad support"
 680         depends on ARCH_W90X900
 681         select INPUT_MATRIXKMAP
 682         help
 683           Say Y here to enable the matrix keypad on evaluation board
 684           based on W90P910.
 685
 686           To compile this driver as a module, choose M here: the
 687           module will be called w90p910_keypad.
 688
 689 config KEYBOARD_CROS_EC
 690         tristate "ChromeOS EC keyboard"
 691         select INPUT_MATRIXKMAP
 692         depends on MFD_CROS_EC
 693         help
 694           Say Y here to enable the matrix keyboard used by ChromeOS devices
 695           and implemented on the ChromeOS EC. You must enable one bus option
 696           (MFD_CROS_EC_I2C or MFD_CROS_EC_SPI) to use this.
 697
 698           To compile this driver as a module, choose M here: the
 699           module will be called cros_ec_keyb.
 700
 701 config KEYBOARD_CAP11XX
 702         tristate "Microchip CAP11XX based touch sensors"
 703         depends on OF && I2C
 704         select REGMAP_I2C
 705         help
 706           Say Y here to enable the CAP11XX touch sensor driver.
 707
 708           To compile this driver as a module, choose M here: the
 709           module will be called cap11xx.
 710
 711 config KEYBOARD_BCM
 712         tristate "Broadcom keypad driver"
 713         depends on OF && HAVE_CLK
 714         select INPUT_MATRIXKMAP
 715         default ARCH_BCM_CYGNUS
 716         help
 717           Say Y here if you want to use Broadcom keypad.
 718
 719           To compile this driver as a module, choose M here: the
 720           module will be called bcm-keypad.
 721
 722 endif