drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config OF_TOUCHSCREEN
  15         def_tristate INPUT
  16         depends on INPUT && OF
  17
  18 config TOUCHSCREEN_88PM860X
  19         tristate "Marvell 88PM860x touchscreen"
  20         depends on MFD_88PM860X
  21         help
  22           Say Y here if you have a 88PM860x PMIC and want to enable
  23           support for the built-in touchscreen.
  24
  25           If unsure, say N.
  26
  27           To compile this driver as a module, choose M here: the
  28           module will be called 88pm860x-ts.
  29
  30 config TOUCHSCREEN_ADS7846
  31         tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  32         depends on SPI_MASTER
  33         depends on HWMON = n || HWMON
  34         help
  35           Say Y here if you have a touchscreen interface using the
  36           ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  37           and your board-specific setup code includes that in its
  38           table of SPI devices.
  39
  40           If HWMON is selected, and the driver is told the reference voltage
  41           on your board, you will also get hwmon interfaces for the voltage
  42           (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  43
  44           If unsure, say N (but it's safe to say "Y").
  45
  46           To compile this driver as a module, choose M here: the
  47           module will be called ads7846.
  48
  49 config TOUCHSCREEN_AD7877
  50         tristate "AD7877 based touchscreens"
  51         depends on SPI_MASTER
  52         help
  53           Say Y here if you have a touchscreen interface using the
  54           AD7877 controller, and your board-specific initialization
  55           code includes that in its table of SPI devices.
  56
  57           If unsure, say N (but it's safe to say "Y").
  58
  59           To compile this driver as a module, choose M here: the
  60           module will be called ad7877.
  61
  62 config TOUCHSCREEN_AD7879
  63         tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  64         help
  65           Say Y here if you want to support a touchscreen interface using
  66           the AD7879-1/AD7889-1 controller.
  67
  68           You should select a bus connection too.
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ad7879.
  72
  73 config TOUCHSCREEN_AD7879_I2C
  74         tristate "support I2C bus connection"
  75         depends on TOUCHSCREEN_AD7879 && I2C
  76         help
  77           Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called ad7879-i2c.
  81
  82 config TOUCHSCREEN_AD7879_SPI
  83         tristate "support SPI bus connection"
  84         depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  85         help
  86           Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  87
  88           If unsure, say N (but it's safe to say "Y").
  89
  90           To compile this driver as a module, choose M here: the
  91           module will be called ad7879-spi.
  92
  93 config TOUCHSCREEN_AR1021_I2C
  94         tristate "Microchip AR1021 i2c touchscreen"
  95         depends on I2C && OF
  96         help
  97           Say Y here if you have the Microchip AR1021 touchscreen controller
  98           chip in your system.
  99
 100           If unsure, say N.
 101
 102           To compile this driver as a module, choose M here: the
 103           module will be called ar1021_i2c.
 104
 105 config TOUCHSCREEN_ATMEL_MXT
 106         tristate "Atmel mXT I2C Touchscreen"
 107         depends on I2C
 108         select FW_LOADER
 109         help
 110           Say Y here if you have Atmel mXT series I2C touchscreen,
 111           such as AT42QT602240/ATMXT224, connected to your system.
 112
 113           If unsure, say N.
 114
 115           To compile this driver as a module, choose M here: the
 116           module will be called atmel_mxt_ts.
 117
 118 config TOUCHSCREEN_AUO_PIXCIR
 119         tristate "AUO in-cell touchscreen using Pixcir ICs"
 120         depends on I2C
 121         depends on GPIOLIB
 122         help
 123           Say Y here if you have a AUO display with in-cell touchscreen
 124           using Pixcir ICs.
 125
 126           If unsure, say N.
 127
 128           To compile this driver as a module, choose M here: the
 129           module will be called auo-pixcir-ts.
 130
 131 config TOUCHSCREEN_BU21013
 132         tristate "BU21013 based touch panel controllers"
 133         depends on I2C
 134         help
 135           Say Y here if you have a bu21013 touchscreen connected to
 136           your system.
 137
 138           If unsure, say N.
 139
 140           To compile this driver as a module, choose M here: the
 141           module will be called bu21013_ts.
 142
 143 config TOUCHSCREEN_CHIPONE_ICN8318
 144         tristate "chipone icn8318 touchscreen controller"
 145         depends on GPIOLIB
 146         depends on I2C
 147         depends on OF
 148         help
 149           Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
 150
 151           If unsure, say N.
 152
 153           To compile this driver as a module, choose M here: the
 154           module will be called chipone_icn8318.
 155
 156 config TOUCHSCREEN_CY8CTMG110
 157         tristate "cy8ctmg110 touchscreen"
 158         depends on I2C
 159         depends on GPIOLIB
 160         help
 161           Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 162           an AAVA device.
 163
 164           If unsure, say N.
 165
 166           To compile this driver as a module, choose M here: the
 167           module will be called cy8ctmg110_ts.
 168
 169 config TOUCHSCREEN_CYTTSP_CORE
 170         tristate "Cypress TTSP touchscreen"
 171         help
 172           Say Y here if you have a touchscreen using controller from
 173           the Cypress TrueTouch(tm) Standard Product family connected
 174           to your system. You will also need to select appropriate
 175           bus connection below.
 176
 177           If unsure, say N.
 178
 179           To compile this driver as a module, choose M here: the
 180           module will be called cyttsp_core.
 181
 182 config TOUCHSCREEN_CYTTSP_I2C
 183         tristate "support I2C bus connection"
 184         depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 185         help
 186           Say Y here if the touchscreen is connected via I2C bus.
 187
 188           To compile this driver as a module, choose M here: the
 189           module will be called cyttsp_i2c.
 190
 191 config TOUCHSCREEN_CYTTSP_SPI
 192         tristate "support SPI bus connection"
 193         depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 194         help
 195           Say Y here if the touchscreen is connected via SPI bus.
 196
 197           To compile this driver as a module, choose M here: the
 198           module will be called cyttsp_spi.
 199
 200 config TOUCHSCREEN_CYTTSP4_CORE
 201         tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 202         help
 203           Core driver for Cypress TrueTouch(tm) Standard Product
 204           Generation4 touchscreen controllers.
 205
 206           Say Y here if you have a Cypress Gen4 touchscreen.
 207
 208           If unsure, say N.
 209
 210           To compile this driver as a module, choose M here.
 211
 212 config TOUCHSCREEN_CYTTSP4_I2C
 213         tristate "support I2C bus connection"
 214         depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 215         help
 216           Say Y here if the touchscreen is connected via I2C bus.
 217
 218           To compile this driver as a module, choose M here: the
 219           module will be called cyttsp4_i2c.
 220
 221 config TOUCHSCREEN_CYTTSP4_SPI
 222         tristate "support SPI bus connection"
 223         depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 224         help
 225           Say Y here if the touchscreen is connected via SPI bus.
 226
 227           To compile this driver as a module, choose M here: the
 228           module will be called cyttsp4_spi.
 229
 230 config TOUCHSCREEN_DA9034
 231         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 232         depends on PMIC_DA903X
 233         default y
 234         help
 235           Say Y here to enable the support for the touchscreen found
 236           on Dialog Semiconductor DA9034 PMIC.
 237
 238           If unsure, say N.
 239
 240           To compile this driver as a module, choose M here: the
 241           module will be called da9034-ts.
 242
 243 config TOUCHSCREEN_DA9052
 244         tristate "Dialog DA9052/DA9053 TSI"
 245         depends on PMIC_DA9052
 246         help
 247           Say Y here to support the touchscreen found on Dialog Semiconductor
 248           DA9052-BC and DA9053-AA/Bx PMICs.
 249
 250           If unsure, say N.
 251
 252           To compile this driver as a module, choose M here: the
 253           module will be called da9052_tsi.
 254
 255 config TOUCHSCREEN_DYNAPRO
 256         tristate "Dynapro serial touchscreen"
 257         select SERIO
 258         help
 259           Say Y here if you have a Dynapro serial touchscreen connected to
 260           your system.
 261
 262           If unsure, say N.
 263
 264           To compile this driver as a module, choose M here: the
 265           module will be called dynapro.
 266
 267 config TOUCHSCREEN_HAMPSHIRE
 268         tristate "Hampshire serial touchscreen"
 269         select SERIO
 270         help
 271           Say Y here if you have a Hampshire serial touchscreen connected to
 272           your system.
 273
 274           If unsure, say N.
 275
 276           To compile this driver as a module, choose M here: the
 277           module will be called hampshire.
 278
 279 config TOUCHSCREEN_EETI
 280         tristate "EETI touchscreen panel support"
 281         depends on I2C
 282         help
 283           Say Y here to enable support for I2C connected EETI touch panels.
 284
 285           To compile this driver as a module, choose M here: the
 286           module will be called eeti_ts.
 287
 288 config TOUCHSCREEN_EGALAX
 289         tristate "EETI eGalax multi-touch panel support"
 290         depends on I2C && OF
 291         help
 292           Say Y here to enable support for I2C connected EETI
 293           eGalax multi-touch panels.
 294
 295           To compile this driver as a module, choose M here: the
 296           module will be called egalax_ts.
 297
 298 config TOUCHSCREEN_FUJITSU
 299         tristate "Fujitsu serial touchscreen"
 300         select SERIO
 301         help
 302           Say Y here if you have the Fujitsu touchscreen (such as one
 303           installed in Lifebook P series laptop) connected to your
 304           system.
 305
 306           If unsure, say N.
 307
 308           To compile this driver as a module, choose M here: the
 309           module will be called fujitsu-ts.
 310
 311 config TOUCHSCREEN_GOODIX
 312         tristate "Goodix I2C touchscreen"
 313         depends on I2C
 314         help
 315           Say Y here if you have the Goodix touchscreen (such as one
 316           installed in Onda v975w tablets) connected to your
 317           system. It also supports 5-finger chip models, which can be
 318           found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 319
 320           If unsure, say N.
 321
 322           To compile this driver as a module, choose M here: the
 323           module will be called goodix.
 324
 325 config TOUCHSCREEN_ILI210X
 326         tristate "Ilitek ILI210X based touchscreen"
 327         depends on I2C
 328         help
 329           Say Y here if you have a ILI210X based touchscreen
 330           controller. This driver supports models ILI2102,
 331           ILI2102s, ILI2103, ILI2103s and ILI2105.
 332           Such kind of chipsets can be found in Amazon Kindle Fire
 333           touchscreens.
 334
 335           If unsure, say N.
 336
 337           To compile this driver as a module, choose M here: the
 338           module will be called ili210x.
 339
 340 config TOUCHSCREEN_IPROC
 341         tristate "IPROC touch panel driver support"
 342         depends on ARCH_BCM_IPROC || COMPILE_TEST
 343         help
 344           Say Y here if you want to add support for the IPROC touch
 345           controller to your system.
 346
 347           If unsure, say N.
 348
 349           To compile this driver as a module, choose M here: the
 350           module will be called bcm_iproc_tsc.
 351
 352 config TOUCHSCREEN_S3C2410
 353         tristate "Samsung S3C2410/generic touchscreen input driver"
 354         depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 355         select S3C_ADC
 356         help
 357           Say Y here if you have the s3c2410 touchscreen.
 358
 359           If unsure, say N.
 360
 361           To compile this driver as a module, choose M here: the
 362           module will be called s3c2410_ts.
 363
 364 config TOUCHSCREEN_GUNZE
 365         tristate "Gunze AHL-51S touchscreen"
 366         select SERIO
 367         help
 368           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 369           your system.
 370
 371           If unsure, say N.
 372
 373           To compile this driver as a module, choose M here: the
 374           module will be called gunze.
 375
 376 config TOUCHSCREEN_ELAN
 377         tristate "Elan eKTH I2C touchscreen"
 378         depends on I2C
 379         help
 380           Say Y here if you have an Elan eKTH I2C touchscreen
 381           connected to your system.
 382
 383           If unsure, say N.
 384
 385           To compile this driver as a module, choose M here: the
 386           module will be called elants_i2c.
 387
 388 config TOUCHSCREEN_ELO
 389         tristate "Elo serial touchscreens"
 390         select SERIO
 391         help
 392           Say Y here if you have an Elo serial touchscreen connected to
 393           your system.
 394
 395           If unsure, say N.
 396
 397           To compile this driver as a module, choose M here: the
 398           module will be called elo.
 399
 400 config TOUCHSCREEN_WACOM_W8001
 401         tristate "Wacom W8001 penabled serial touchscreen"
 402         select SERIO
 403         help
 404           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 405           connected to your system.
 406
 407           If unsure, say N.
 408
 409           To compile this driver as a module, choose M here: the
 410           module will be called wacom_w8001.
 411
 412 config TOUCHSCREEN_WACOM_I2C
 413         tristate "Wacom Tablet support (I2C)"
 414         depends on I2C
 415         help
 416           Say Y here if you want to use the I2C version of the Wacom
 417           Pen Tablet.
 418
 419           If unsure, say N.
 420
 421           To compile this driver as a module, choose M here: the module
 422           will be called wacom_i2c.
 423
 424 config TOUCHSCREEN_LPC32XX
 425         tristate "LPC32XX touchscreen controller"
 426         depends on ARCH_LPC32XX
 427         help
 428           Say Y here if you have a LPC32XX device and want
 429           to support the built-in touchscreen.
 430
 431           To compile this driver as a module, choose M here: the
 432           module will be called lpc32xx_ts.
 433
 434 config TOUCHSCREEN_MAX11801
 435         tristate "MAX11801 based touchscreens"
 436         depends on I2C
 437         help
 438           Say Y here if you have a MAX11801 based touchscreen
 439           controller.
 440
 441           If unsure, say N.
 442
 443           To compile this driver as a module, choose M here: the
 444           module will be called max11801_ts.
 445
 446 config TOUCHSCREEN_MCS5000
 447         tristate "MELFAS MCS-5000 touchscreen"
 448         depends on I2C
 449         help
 450           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 451           chip in your system.
 452
 453           If unsure, say N.
 454
 455           To compile this driver as a module, choose M here: the
 456           module will be called mcs5000_ts.
 457
 458 config TOUCHSCREEN_MMS114
 459         tristate "MELFAS MMS114 touchscreen"
 460         depends on I2C
 461         help
 462           Say Y here if you have the MELFAS MMS114 touchscreen controller
 463           chip in your system.
 464
 465           If unsure, say N.
 466
 467           To compile this driver as a module, choose M here: the
 468           module will be called mms114.
 469
 470 config TOUCHSCREEN_MTOUCH
 471         tristate "MicroTouch serial touchscreens"
 472         select SERIO
 473         help
 474           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 475           your system.
 476
 477           If unsure, say N.
 478
 479           To compile this driver as a module, choose M here: the
 480           module will be called mtouch.
 481
 482 config TOUCHSCREEN_INEXIO
 483         tristate "iNexio serial touchscreens"
 484         select SERIO
 485         help
 486           Say Y here if you have an iNexio serial touchscreen connected to
 487           your system.
 488
 489           If unsure, say N.
 490
 491           To compile this driver as a module, choose M here: the
 492           module will be called inexio.
 493
 494 config TOUCHSCREEN_INTEL_MID
 495         tristate "Intel MID platform resistive touchscreen"
 496         depends on INTEL_SCU_IPC
 497         help
 498           Say Y here if you have a Intel MID based touchscreen in
 499           your system.
 500
 501           If unsure, say N.
 502
 503           To compile this driver as a module, choose M here: the
 504           module will be called intel_mid_touch.
 505
 506 config TOUCHSCREEN_MK712
 507         tristate "ICS MicroClock MK712 touchscreen"
 508         help
 509           Say Y here if you have the ICS MicroClock MK712 touchscreen
 510           controller chip in your system.
 511
 512           If unsure, say N.
 513
 514           To compile this driver as a module, choose M here: the
 515           module will be called mk712.
 516
 517 config TOUCHSCREEN_HP600
 518         tristate "HP Jornada 6xx touchscreen"
 519         depends on SH_HP6XX && SH_ADC
 520         help
 521           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 522           support the built-in touchscreen.
 523
 524           To compile this driver as a module, choose M here: the
 525           module will be called hp680_ts_input.
 526
 527 config TOUCHSCREEN_HP7XX
 528         tristate "HP Jornada 7xx touchscreen"
 529         depends on SA1100_JORNADA720_SSP
 530         help
 531           Say Y here if you have a HP Jornada 710/720/728 and want
 532           to support the built-in touchscreen.
 533
 534           To compile this driver as a module, choose M here: the
 535           module will be called jornada720_ts.
 536
 537 config TOUCHSCREEN_IPAQ_MICRO
 538         tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 539         depends on MFD_IPAQ_MICRO
 540         help
 541           Say Y here to enable support for the touchscreen attached to
 542           the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 543
 544           If unsure, say N.
 545
 546           To compile this driver as a module, choose M here: the
 547           module will be called ipaq-micro-ts.
 548
 549 config TOUCHSCREEN_HTCPEN
 550         tristate "HTC Shift X9500 touchscreen"
 551         depends on ISA
 552         help
 553           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 554           Clio / Shangrila and want to support the built-in touchscreen.
 555
 556           If unsure, say N.
 557
 558           To compile this driver as a module, choose M here: the
 559           module will be called htcpen.
 560
 561 config TOUCHSCREEN_PENMOUNT
 562         tristate "Penmount serial touchscreen"
 563         select SERIO
 564         help
 565           Say Y here if you have a Penmount serial touchscreen connected to
 566           your system.
 567
 568           If unsure, say N.
 569
 570           To compile this driver as a module, choose M here: the
 571           module will be called penmount.
 572
 573 config TOUCHSCREEN_EDT_FT5X06
 574         tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 575         depends on I2C
 576         help
 577           Say Y here if you have an EDT "Polytouch" touchscreen based
 578           on the FocalTech FT5x06 family of controllers connected to
 579           your system.
 580
 581           If unsure, say N.
 582
 583           To compile this driver as a module, choose M here: the
 584           module will be called edt-ft5x06.
 585
 586 config TOUCHSCREEN_MIGOR
 587         tristate "Renesas MIGO-R touchscreen"
 588         depends on SH_MIGOR && I2C
 589         help
 590           Say Y here to enable MIGO-R touchscreen support.
 591
 592           If unsure, say N.
 593
 594           To compile this driver as a module, choose M here: the
 595           module will be called migor_ts.
 596
 597 config TOUCHSCREEN_TOUCHRIGHT
 598         tristate "Touchright serial touchscreen"
 599         select SERIO
 600         help
 601           Say Y here if you have a Touchright serial touchscreen connected to
 602           your system.
 603
 604           If unsure, say N.
 605
 606           To compile this driver as a module, choose M here: the
 607           module will be called touchright.
 608
 609 config TOUCHSCREEN_TOUCHWIN
 610         tristate "Touchwin serial touchscreen"
 611         select SERIO
 612         help
 613           Say Y here if you have a Touchwin serial touchscreen connected to
 614           your system.
 615
 616           If unsure, say N.
 617
 618           To compile this driver as a module, choose M here: the
 619           module will be called touchwin.
 620
 621 config TOUCHSCREEN_TI_AM335X_TSC
 622         tristate "TI Touchscreen Interface"
 623         depends on MFD_TI_AM335X_TSCADC
 624         help
 625           Say Y here if you have 4/5/8 wire touchscreen controller
 626           to be connected to the ADC controller on your TI AM335x SoC.
 627
 628           If unsure, say N.
 629
 630           To compile this driver as a module, choose M here: the
 631           module will be called ti_am335x_tsc.
 632
 633 config TOUCHSCREEN_UCB1400
 634         tristate "Philips UCB1400 touchscreen"
 635         depends on AC97_BUS
 636         depends on UCB1400_CORE
 637         help
 638           This enables support for the Philips UCB1400 touchscreen interface.
 639           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 640           will be initialized only after the ALSA subsystem has been
 641           brought up and the UCB1400 detected.  You therefore have to
 642           configure ALSA support as well (either built-in or modular,
 643           independently of whether this driver is itself built-in or
 644           modular) for this driver to work.
 645
 646           To compile this driver as a module, choose M here: the
 647           module will be called ucb1400_ts.
 648
 649 config TOUCHSCREEN_PIXCIR
 650         tristate "PIXCIR I2C touchscreens"
 651         depends on I2C
 652         help
 653           Say Y here if you have a pixcir i2c touchscreen
 654           controller.
 655
 656           If unsure, say N.
 657
 658           To compile this driver as a module, choose M here: the
 659           module will be called pixcir_i2c_ts.
 660
 661 config TOUCHSCREEN_WM831X
 662         tristate "Support for WM831x touchscreen controllers"
 663         depends on MFD_WM831X
 664         help
 665           This enables support for the touchscreen controller on the WM831x
 666           series of PMICs.
 667
 668           To compile this driver as a module, choose M here: the
 669           module will be called wm831x-ts.
 670
 671 config TOUCHSCREEN_WM97XX
 672         tristate "Support for WM97xx AC97 touchscreen controllers"
 673         depends on AC97_BUS
 674         help
 675           Say Y here if you have a Wolfson Microelectronics WM97xx
 676           touchscreen connected to your system. Note that this option
 677           only enables core driver, you will also need to select
 678           support for appropriate chip below.
 679
 680           If unsure, say N.
 681
 682           To compile this driver as a module, choose M here: the
 683           module will be called wm97xx-ts.
 684
 685 config TOUCHSCREEN_WM9705
 686         bool "WM9705 Touchscreen interface support"
 687         depends on TOUCHSCREEN_WM97XX
 688         default y
 689         help
 690           Say Y here to enable support for the Wolfson Microelectronics
 691           WM9705 touchscreen controller.
 692
 693 config TOUCHSCREEN_WM9712
 694         bool "WM9712 Touchscreen interface support"
 695         depends on TOUCHSCREEN_WM97XX
 696         default y
 697         help
 698           Say Y here to enable support for the Wolfson Microelectronics
 699           WM9712 touchscreen controller.
 700
 701 config TOUCHSCREEN_WM9713
 702         bool "WM9713 Touchscreen interface support"
 703         depends on TOUCHSCREEN_WM97XX
 704         default y
 705         help
 706           Say Y here to enable support for the Wolfson Microelectronics
 707           WM9713 touchscreen controller.
 708
 709 config TOUCHSCREEN_WM97XX_ATMEL
 710         tristate "WM97xx Atmel accelerated touch"
 711         depends on TOUCHSCREEN_WM97XX && AVR32
 712         help
 713           Say Y here for support for streaming mode with WM97xx touchscreens
 714           on Atmel AT91 or AVR32 systems with an AC97C module.
 715
 716           Be aware that this will use channel B in the controller for
 717           streaming data, this must not conflict with other AC97C drivers.
 718
 719           If unsure, say N.
 720
 721           To compile this driver as a module, choose M here: the module will
 722           be called atmel-wm97xx.
 723
 724 config TOUCHSCREEN_WM97XX_MAINSTONE
 725         tristate "WM97xx Mainstone/Palm accelerated touch"
 726         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 727         help
 728           Say Y here for support for streaming mode with WM97xx touchscreens
 729           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 730
 731           If unsure, say N.
 732
 733           To compile this driver as a module, choose M here: the
 734           module will be called mainstone-wm97xx.
 735
 736 config TOUCHSCREEN_WM97XX_ZYLONITE
 737         tristate "Zylonite accelerated touch"
 738         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 739         select TOUCHSCREEN_WM9713
 740         help
 741           Say Y here for support for streaming mode with the touchscreen
 742           on Zylonite systems.
 743
 744           If unsure, say N.
 745
 746           To compile this driver as a module, choose M here: the
 747           module will be called zylonite-wm97xx.
 748
 749 config TOUCHSCREEN_USB_COMPOSITE
 750         tristate "USB Touchscreen Driver"
 751         depends on USB_ARCH_HAS_HCD
 752         select USB
 753         help
 754           USB Touchscreen driver for:
 755           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 756           - PanJit TouchSet USB
 757           - 3M MicroTouch USB (EX II series)
 758           - ITM
 759           - some other eTurboTouch
 760           - Gunze AHL61
 761           - DMC TSC-10/25
 762           - IRTOUCHSYSTEMS/UNITOP
 763           - IdealTEK URTC1000
 764           - GoTop Super_Q2/GogoPen/PenPower tablets
 765           - JASTEC USB Touch Controller/DigiTech DTR-02U
 766           - Zytronic controllers
 767           - Elo TouchSystems 2700 IntelliTouch
 768           - EasyTouch USB Touch Controller from Data Modul
 769           - e2i (Mimo monitors)
 770
 771           Have a look at <http://linux.chapter7.ch/touchkit/> for
 772           a usage description and the required user-space stuff.
 773
 774           To compile this driver as a module, choose M here: the
 775           module will be called usbtouchscreen.
 776
 777 config TOUCHSCREEN_MC13783
 778         tristate "Freescale MC13783 touchscreen input driver"
 779         depends on MFD_MC13XXX
 780         help
 781           Say Y here if you have an Freescale MC13783 PMIC on your
 782           board and want to use its touchscreen
 783
 784           If unsure, say N.
 785
 786           To compile this driver as a module, choose M here: the
 787           module will be called mc13783_ts.
 788
 789 config TOUCHSCREEN_USB_EGALAX
 790         default y
 791         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 792         depends on TOUCHSCREEN_USB_COMPOSITE
 793
 794 config TOUCHSCREEN_USB_PANJIT
 795         default y
 796         bool "PanJit device support" if EXPERT
 797         depends on TOUCHSCREEN_USB_COMPOSITE
 798
 799 config TOUCHSCREEN_USB_3M
 800         default y
 801         bool "3M/Microtouch EX II series device support" if EXPERT
 802         depends on TOUCHSCREEN_USB_COMPOSITE
 803
 804 config TOUCHSCREEN_USB_ITM
 805         default y
 806         bool "ITM device support" if EXPERT
 807         depends on TOUCHSCREEN_USB_COMPOSITE
 808
 809 config TOUCHSCREEN_USB_ETURBO
 810         default y
 811         bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 812         depends on TOUCHSCREEN_USB_COMPOSITE
 813
 814 config TOUCHSCREEN_USB_GUNZE
 815         default y
 816         bool "Gunze AHL61 device support" if EXPERT
 817         depends on TOUCHSCREEN_USB_COMPOSITE
 818
 819 config TOUCHSCREEN_USB_DMC_TSC10
 820         default y
 821         bool "DMC TSC-10/25 device support" if EXPERT
 822         depends on TOUCHSCREEN_USB_COMPOSITE
 823
 824 config TOUCHSCREEN_USB_IRTOUCH
 825         default y
 826         bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 827         depends on TOUCHSCREEN_USB_COMPOSITE
 828
 829 config TOUCHSCREEN_USB_IDEALTEK
 830         default y
 831         bool "IdealTEK URTC1000 device support" if EXPERT
 832         depends on TOUCHSCREEN_USB_COMPOSITE
 833
 834 config TOUCHSCREEN_USB_GENERAL_TOUCH
 835         default y
 836         bool "GeneralTouch Touchscreen device support" if EXPERT
 837         depends on TOUCHSCREEN_USB_COMPOSITE
 838
 839 config TOUCHSCREEN_USB_GOTOP
 840         default y
 841         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 842         depends on TOUCHSCREEN_USB_COMPOSITE
 843
 844 config TOUCHSCREEN_USB_JASTEC
 845         default y
 846         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 847         depends on TOUCHSCREEN_USB_COMPOSITE
 848
 849 config TOUCHSCREEN_USB_ELO
 850         default y
 851         bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 852         depends on TOUCHSCREEN_USB_COMPOSITE
 853
 854 config TOUCHSCREEN_USB_E2I
 855         default y
 856         bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 857         depends on TOUCHSCREEN_USB_COMPOSITE
 858
 859 config TOUCHSCREEN_USB_ZYTRONIC
 860         default y
 861         bool "Zytronic controller" if EXPERT
 862         depends on TOUCHSCREEN_USB_COMPOSITE
 863
 864 config TOUCHSCREEN_USB_ETT_TC45USB
 865         default y
 866         bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 867         depends on TOUCHSCREEN_USB_COMPOSITE
 868
 869 config TOUCHSCREEN_USB_NEXIO
 870         default y
 871         bool "NEXIO/iNexio device support" if EXPERT
 872         depends on TOUCHSCREEN_USB_COMPOSITE
 873
 874 config TOUCHSCREEN_USB_EASYTOUCH
 875         default y
 876         bool "EasyTouch USB Touch controller device support" if EMBEDDED
 877         depends on TOUCHSCREEN_USB_COMPOSITE
 878         help
 879           Say Y here if you have an EasyTouch USB Touch controller.
 880           If unsure, say N.
 881
 882 config TOUCHSCREEN_TOUCHIT213
 883         tristate "Sahara TouchIT-213 touchscreen"
 884         select SERIO
 885         help
 886           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 887
 888           If unsure, say N.
 889
 890           To compile this driver as a module, choose M here: the
 891           module will be called touchit213.
 892
 893 config TOUCHSCREEN_TSC_SERIO
 894         tristate "TSC-10/25/40 serial touchscreen support"
 895         select SERIO
 896         help
 897           Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 898           to your system.
 899
 900           If unsure, say N.
 901
 902           To compile this driver as a module, choose M here: the
 903           module will be called tsc40.
 904
 905 config TOUCHSCREEN_TSC2005
 906         tristate "TSC2005 based touchscreens"
 907         depends on SPI_MASTER
 908         help
 909           Say Y here if you have a TSC2005 based touchscreen.
 910
 911           If unsure, say N.
 912
 913           To compile this driver as a module, choose M here: the
 914           module will be called tsc2005.
 915
 916 config TOUCHSCREEN_TSC2007
 917         tristate "TSC2007 based touchscreens"
 918         depends on I2C
 919         help
 920           Say Y here if you have a TSC2007 based touchscreen.
 921
 922           If unsure, say N.
 923
 924           To compile this driver as a module, choose M here: the
 925           module will be called tsc2007.
 926
 927 config TOUCHSCREEN_W90X900
 928         tristate "W90P910 touchscreen driver"
 929         depends on ARCH_W90X900
 930         help
 931           Say Y here if you have a W90P910 based touchscreen.
 932
 933           To compile this driver as a module, choose M here: the
 934           module will be called w90p910_ts.
 935
 936 config TOUCHSCREEN_PCAP
 937         tristate "Motorola PCAP touchscreen"
 938         depends on EZX_PCAP
 939         help
 940           Say Y here if you have a Motorola EZX telephone and
 941           want to enable support for the built-in touchscreen.
 942
 943           To compile this driver as a module, choose M here: the
 944           module will be called pcap_ts.
 945
 946 config TOUCHSCREEN_ST1232
 947         tristate "Sitronix ST1232 touchscreen controllers"
 948         depends on I2C
 949         help
 950           Say Y here if you want to support Sitronix ST1232
 951           touchscreen controller.
 952
 953           If unsure, say N.
 954
 955           To compile this driver as a module, choose M here: the
 956           module will be called st1232_ts.
 957
 958 config TOUCHSCREEN_STMPE
 959         tristate "STMicroelectronics STMPE touchscreens"
 960         depends on MFD_STMPE
 961         help
 962           Say Y here if you want support for STMicroelectronics
 963           STMPE touchscreen controllers.
 964
 965           To compile this driver as a module, choose M here: the
 966           module will be called stmpe-ts.
 967
 968 config TOUCHSCREEN_SUN4I
 969         tristate "Allwinner sun4i resistive touchscreen controller support"
 970         depends on ARCH_SUNXI || COMPILE_TEST
 971         depends on HWMON
 972         depends on THERMAL || !THERMAL_OF
 973         help
 974           This selects support for the resistive touchscreen controller
 975           found on Allwinner sunxi SoCs.
 976
 977           To compile this driver as a module, choose M here: the
 978           module will be called sun4i-ts.
 979
 980 config TOUCHSCREEN_SUR40
 981         tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
 982         depends on USB
 983         select INPUT_POLLDEV
 984         help
 985           Say Y here if you want support for the Samsung SUR40 touchscreen
 986           (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
 987
 988           To compile this driver as a module, choose M here: the
 989           module will be called sur40.
 990
 991 config TOUCHSCREEN_SX8654
 992         tristate "Semtech SX8654 touchscreen"
 993         depends on I2C
 994         help
 995           Say Y here if you have a Semtech SX8654 touchscreen controller.
 996
 997           If unsure, say N
 998
 999           To compile this driver as a module, choose M here: the
1000           module will be called sx8654.
1001
1002 config TOUCHSCREEN_TPS6507X
1003         tristate "TPS6507x based touchscreens"
1004         depends on I2C
1005         select INPUT_POLLDEV
1006         help
1007           Say Y here if you have a TPS6507x based touchscreen
1008           controller.
1009
1010           If unsure, say N.
1011
1012           To compile this driver as a module, choose M here: the
1013           module will be called tps6507x_ts.
1014
1015 config TOUCHSCREEN_ZFORCE
1016         tristate "Neonode zForce infrared touchscreens"
1017         depends on I2C
1018         depends on GPIOLIB
1019         help
1020           Say Y here if you have a touchscreen using the zforce
1021           infraread technology from Neonode.
1022
1023           If unsure, say N.
1024
1025           To compile this driver as a module, choose M here: the
1026           module will be called zforce_ts.
1027
1028 endif