2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_PROPERTIES
18 config TOUCHSCREEN_88PM860X
19 tristate "Marvell 88PM860x touchscreen"
20 depends on MFD_88PM860X
22 Say Y here if you have a 88PM860x PMIC and want to enable
23 support for the built-in touchscreen.
27 To compile this driver as a module, choose M here: the
28 module will be called 88pm860x-ts.
30 config TOUCHSCREEN_ADS7846
31 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
33 depends on HWMON = n || HWMON
35 Say Y here if you have a touchscreen interface using the
36 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
37 and your board-specific setup code includes that in its
40 If HWMON is selected, and the driver is told the reference voltage
41 on your board, you will also get hwmon interfaces for the voltage
42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
44 If unsure, say N (but it's safe to say "Y").
46 To compile this driver as a module, choose M here: the
47 module will be called ads7846.
49 config TOUCHSCREEN_AD7877
50 tristate "AD7877 based touchscreens"
53 Say Y here if you have a touchscreen interface using the
54 AD7877 controller, and your board-specific initialization
55 code includes that in its table of SPI devices.
57 If unsure, say N (but it's safe to say "Y").
59 To compile this driver as a module, choose M here: the
60 module will be called ad7877.
62 config TOUCHSCREEN_AD7879
63 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
65 Say Y here if you want to support a touchscreen interface using
66 the AD7879-1/AD7889-1 controller.
68 You should select a bus connection too.
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
73 config TOUCHSCREEN_AD7879_I2C
74 tristate "support I2C bus connection"
75 depends on TOUCHSCREEN_AD7879 && I2C
77 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
79 To compile this driver as a module, choose M here: the
80 module will be called ad7879-i2c.
82 config TOUCHSCREEN_AD7879_SPI
83 tristate "support SPI bus connection"
84 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
86 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
88 If unsure, say N (but it's safe to say "Y").
90 To compile this driver as a module, choose M here: the
91 module will be called ad7879-spi.
93 config TOUCHSCREEN_AR1021_I2C
94 tristate "Microchip AR1021 i2c touchscreen"
97 Say Y here if you have the Microchip AR1021 touchscreen controller
102 To compile this driver as a module, choose M here: the
103 module will be called ar1021_i2c.
105 config TOUCHSCREEN_ATMEL_MXT
106 tristate "Atmel mXT I2C Touchscreen"
110 Say Y here if you have Atmel mXT series I2C touchscreen,
111 such as AT42QT602240/ATMXT224, connected to your system.
115 To compile this driver as a module, choose M here: the
116 module will be called atmel_mxt_ts.
118 config TOUCHSCREEN_ATMEL_MXT_T37
119 bool "Support T37 Diagnostic Data"
120 depends on TOUCHSCREEN_ATMEL_MXT && VIDEO_V4L2
121 select VIDEOBUF2_VMALLOC
123 Say Y here if you want support to output data from the T37
124 Diagnostic Data object using a V4L device.
126 config TOUCHSCREEN_AUO_PIXCIR
127 tristate "AUO in-cell touchscreen using Pixcir ICs"
129 depends on GPIOLIB || COMPILE_TEST
131 Say Y here if you have a AUO display with in-cell touchscreen
136 To compile this driver as a module, choose M here: the
137 module will be called auo-pixcir-ts.
139 config TOUCHSCREEN_BU21013
140 tristate "BU21013 based touch panel controllers"
143 Say Y here if you have a bu21013 touchscreen connected to
148 To compile this driver as a module, choose M here: the
149 module will be called bu21013_ts.
151 config TOUCHSCREEN_CHIPONE_ICN8318
152 tristate "chipone icn8318 touchscreen controller"
153 depends on GPIOLIB || COMPILE_TEST
157 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
161 To compile this driver as a module, choose M here: the
162 module will be called chipone_icn8318.
164 config TOUCHSCREEN_CY8CTMG110
165 tristate "cy8ctmg110 touchscreen"
167 depends on GPIOLIB || COMPILE_TEST
169 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
174 To compile this driver as a module, choose M here: the
175 module will be called cy8ctmg110_ts.
177 config TOUCHSCREEN_CYTTSP_CORE
178 tristate "Cypress TTSP touchscreen"
180 Say Y here if you have a touchscreen using controller from
181 the Cypress TrueTouch(tm) Standard Product family connected
182 to your system. You will also need to select appropriate
183 bus connection below.
187 To compile this driver as a module, choose M here: the
188 module will be called cyttsp_core.
190 config TOUCHSCREEN_CYTTSP_I2C
191 tristate "support I2C bus connection"
192 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
194 Say Y here if the touchscreen is connected via I2C bus.
196 To compile this driver as a module, choose M here: the
197 module will be called cyttsp_i2c.
199 config TOUCHSCREEN_CYTTSP_SPI
200 tristate "support SPI bus connection"
201 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
203 Say Y here if the touchscreen is connected via SPI bus.
205 To compile this driver as a module, choose M here: the
206 module will be called cyttsp_spi.
208 config TOUCHSCREEN_CYTTSP4_CORE
209 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
211 Core driver for Cypress TrueTouch(tm) Standard Product
212 Generation4 touchscreen controllers.
214 Say Y here if you have a Cypress Gen4 touchscreen.
218 To compile this driver as a module, choose M here.
220 config TOUCHSCREEN_CYTTSP4_I2C
221 tristate "support I2C bus connection"
222 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
224 Say Y here if the touchscreen is connected via I2C bus.
226 To compile this driver as a module, choose M here: the
227 module will be called cyttsp4_i2c.
229 config TOUCHSCREEN_CYTTSP4_SPI
230 tristate "support SPI bus connection"
231 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
233 Say Y here if the touchscreen is connected via SPI bus.
235 To compile this driver as a module, choose M here: the
236 module will be called cyttsp4_spi.
238 config TOUCHSCREEN_DA9034
239 tristate "Touchscreen support for Dialog Semiconductor DA9034"
240 depends on PMIC_DA903X
243 Say Y here to enable the support for the touchscreen found
244 on Dialog Semiconductor DA9034 PMIC.
248 To compile this driver as a module, choose M here: the
249 module will be called da9034-ts.
251 config TOUCHSCREEN_DA9052
252 tristate "Dialog DA9052/DA9053 TSI"
253 depends on PMIC_DA9052
255 Say Y here to support the touchscreen found on Dialog Semiconductor
256 DA9052-BC and DA9053-AA/Bx PMICs.
260 To compile this driver as a module, choose M here: the
261 module will be called da9052_tsi.
263 config TOUCHSCREEN_DYNAPRO
264 tristate "Dynapro serial touchscreen"
267 Say Y here if you have a Dynapro serial touchscreen connected to
272 To compile this driver as a module, choose M here: the
273 module will be called dynapro.
275 config TOUCHSCREEN_HAMPSHIRE
276 tristate "Hampshire serial touchscreen"
279 Say Y here if you have a Hampshire serial touchscreen connected to
284 To compile this driver as a module, choose M here: the
285 module will be called hampshire.
287 config TOUCHSCREEN_EETI
288 tristate "EETI touchscreen panel support"
291 Say Y here to enable support for I2C connected EETI touch panels.
293 To compile this driver as a module, choose M here: the
294 module will be called eeti_ts.
296 config TOUCHSCREEN_EGALAX
297 tristate "EETI eGalax multi-touch panel support"
300 Say Y here to enable support for I2C connected EETI
301 eGalax multi-touch panels.
303 To compile this driver as a module, choose M here: the
304 module will be called egalax_ts.
306 config TOUCHSCREEN_EGALAX_SERIAL
307 tristate "EETI eGalax serial touchscreen"
310 Say Y here to enable support for serial connected EETI
313 To compile this driver as a module, choose M here: the
314 module will be called egalax_ts_serial.
316 config TOUCHSCREEN_FUJITSU
317 tristate "Fujitsu serial touchscreen"
320 Say Y here if you have the Fujitsu touchscreen (such as one
321 installed in Lifebook P series laptop) connected to your
326 To compile this driver as a module, choose M here: the
327 module will be called fujitsu-ts.
329 config TOUCHSCREEN_GOODIX
330 tristate "Goodix I2C touchscreen"
332 depends on GPIOLIB || COMPILE_TEST
334 Say Y here if you have the Goodix touchscreen (such as one
335 installed in Onda v975w tablets) connected to your
336 system. It also supports 5-finger chip models, which can be
337 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
341 To compile this driver as a module, choose M here: the
342 module will be called goodix.
344 config TOUCHSCREEN_ILI210X
345 tristate "Ilitek ILI210X based touchscreen"
348 Say Y here if you have a ILI210X based touchscreen
349 controller. This driver supports models ILI2102,
350 ILI2102s, ILI2103, ILI2103s and ILI2105.
351 Such kind of chipsets can be found in Amazon Kindle Fire
356 To compile this driver as a module, choose M here: the
357 module will be called ili210x.
359 config TOUCHSCREEN_IPROC
360 tristate "IPROC touch panel driver support"
361 depends on ARCH_BCM_IPROC || COMPILE_TEST
363 Say Y here if you want to add support for the IPROC touch
364 controller to your system.
368 To compile this driver as a module, choose M here: the
369 module will be called bcm_iproc_tsc.
371 config TOUCHSCREEN_S3C2410
372 tristate "Samsung S3C2410/generic touchscreen input driver"
373 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
376 Say Y here if you have the s3c2410 touchscreen.
380 To compile this driver as a module, choose M here: the
381 module will be called s3c2410_ts.
383 config TOUCHSCREEN_GUNZE
384 tristate "Gunze AHL-51S touchscreen"
387 Say Y here if you have the Gunze AHL-51 touchscreen connected to
392 To compile this driver as a module, choose M here: the
393 module will be called gunze.
395 config TOUCHSCREEN_ELAN
396 tristate "Elan eKTH I2C touchscreen"
399 Say Y here if you have an Elan eKTH I2C touchscreen
400 connected to your system.
404 To compile this driver as a module, choose M here: the
405 module will be called elants_i2c.
407 config TOUCHSCREEN_ELO
408 tristate "Elo serial touchscreens"
411 Say Y here if you have an Elo serial touchscreen connected to
416 To compile this driver as a module, choose M here: the
417 module will be called elo.
419 config TOUCHSCREEN_WACOM_W8001
420 tristate "Wacom W8001 penabled serial touchscreen"
423 Say Y here if you have an Wacom W8001 penabled serial touchscreen
424 connected to your system.
428 To compile this driver as a module, choose M here: the
429 module will be called wacom_w8001.
431 config TOUCHSCREEN_WACOM_I2C
432 tristate "Wacom Tablet support (I2C)"
435 Say Y here if you want to use the I2C version of the Wacom
440 To compile this driver as a module, choose M here: the module
441 will be called wacom_i2c.
443 config TOUCHSCREEN_LPC32XX
444 tristate "LPC32XX touchscreen controller"
445 depends on ARCH_LPC32XX
447 Say Y here if you have a LPC32XX device and want
448 to support the built-in touchscreen.
450 To compile this driver as a module, choose M here: the
451 module will be called lpc32xx_ts.
453 config TOUCHSCREEN_MAX11801
454 tristate "MAX11801 based touchscreens"
457 Say Y here if you have a MAX11801 based touchscreen
462 To compile this driver as a module, choose M here: the
463 module will be called max11801_ts.
465 config TOUCHSCREEN_MCS5000
466 tristate "MELFAS MCS-5000 touchscreen"
469 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
474 To compile this driver as a module, choose M here: the
475 module will be called mcs5000_ts.
477 config TOUCHSCREEN_MMS114
478 tristate "MELFAS MMS114 touchscreen"
481 Say Y here if you have the MELFAS MMS114 touchscreen controller
486 To compile this driver as a module, choose M here: the
487 module will be called mms114.
489 config TOUCHSCREEN_MELFAS_MIP4
490 tristate "MELFAS MIP4 Touchscreen"
493 Say Y here if you have a MELFAS MIP4 Touchscreen device.
497 To compile this driver as a module, choose M here:
498 the module will be called melfas_mip4.
500 config TOUCHSCREEN_MTOUCH
501 tristate "MicroTouch serial touchscreens"
504 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
509 To compile this driver as a module, choose M here: the
510 module will be called mtouch.
512 config TOUCHSCREEN_IMX6UL_TSC
513 tristate "Freescale i.MX6UL touchscreen controller"
514 depends on (OF && GPIOLIB) || COMPILE_TEST
516 Say Y here if you have a Freescale i.MX6UL, and want to
517 use the internal touchscreen controller.
521 To compile this driver as a module, choose M here: the
522 module will be called imx6ul_tsc.
524 config TOUCHSCREEN_INEXIO
525 tristate "iNexio serial touchscreens"
528 Say Y here if you have an iNexio serial touchscreen connected to
533 To compile this driver as a module, choose M here: the
534 module will be called inexio.
536 config TOUCHSCREEN_INTEL_MID
537 tristate "Intel MID platform resistive touchscreen"
538 depends on INTEL_SCU_IPC
540 Say Y here if you have a Intel MID based touchscreen in
545 To compile this driver as a module, choose M here: the
546 module will be called intel_mid_touch.
548 config TOUCHSCREEN_MK712
549 tristate "ICS MicroClock MK712 touchscreen"
551 Say Y here if you have the ICS MicroClock MK712 touchscreen
552 controller chip in your system.
556 To compile this driver as a module, choose M here: the
557 module will be called mk712.
559 config TOUCHSCREEN_HP600
560 tristate "HP Jornada 6xx touchscreen"
561 depends on SH_HP6XX && SH_ADC
563 Say Y here if you have a HP Jornada 620/660/680/690 and want to
564 support the built-in touchscreen.
566 To compile this driver as a module, choose M here: the
567 module will be called hp680_ts_input.
569 config TOUCHSCREEN_HP7XX
570 tristate "HP Jornada 7xx touchscreen"
571 depends on SA1100_JORNADA720_SSP
573 Say Y here if you have a HP Jornada 710/720/728 and want
574 to support the built-in touchscreen.
576 To compile this driver as a module, choose M here: the
577 module will be called jornada720_ts.
579 config TOUCHSCREEN_IPAQ_MICRO
580 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
581 depends on MFD_IPAQ_MICRO
583 Say Y here to enable support for the touchscreen attached to
584 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
588 To compile this driver as a module, choose M here: the
589 module will be called ipaq-micro-ts.
591 config TOUCHSCREEN_HTCPEN
592 tristate "HTC Shift X9500 touchscreen"
595 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
596 Clio / Shangrila and want to support the built-in touchscreen.
600 To compile this driver as a module, choose M here: the
601 module will be called htcpen.
603 config TOUCHSCREEN_PENMOUNT
604 tristate "Penmount serial touchscreen"
607 Say Y here if you have a Penmount serial touchscreen connected to
612 To compile this driver as a module, choose M here: the
613 module will be called penmount.
615 config TOUCHSCREEN_EDT_FT5X06
616 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
619 Say Y here if you have an EDT "Polytouch" touchscreen based
620 on the FocalTech FT5x06 family of controllers connected to
625 To compile this driver as a module, choose M here: the
626 module will be called edt-ft5x06.
628 config TOUCHSCREEN_MIGOR
629 tristate "Renesas MIGO-R touchscreen"
630 depends on (SH_MIGOR || COMPILE_TEST) && I2C
632 Say Y here to enable MIGO-R touchscreen support.
636 To compile this driver as a module, choose M here: the
637 module will be called migor_ts.
639 config TOUCHSCREEN_TOUCHRIGHT
640 tristate "Touchright serial touchscreen"
643 Say Y here if you have a Touchright serial touchscreen connected to
648 To compile this driver as a module, choose M here: the
649 module will be called touchright.
651 config TOUCHSCREEN_TOUCHWIN
652 tristate "Touchwin serial touchscreen"
655 Say Y here if you have a Touchwin serial touchscreen connected to
660 To compile this driver as a module, choose M here: the
661 module will be called touchwin.
663 config TOUCHSCREEN_TI_AM335X_TSC
664 tristate "TI Touchscreen Interface"
665 depends on MFD_TI_AM335X_TSCADC
667 Say Y here if you have 4/5/8 wire touchscreen controller
668 to be connected to the ADC controller on your TI AM335x SoC.
672 To compile this driver as a module, choose M here: the
673 module will be called ti_am335x_tsc.
675 config TOUCHSCREEN_UCB1400
676 tristate "Philips UCB1400 touchscreen"
678 depends on UCB1400_CORE
680 This enables support for the Philips UCB1400 touchscreen interface.
681 The UCB1400 is an AC97 audio codec. The touchscreen interface
682 will be initialized only after the ALSA subsystem has been
683 brought up and the UCB1400 detected. You therefore have to
684 configure ALSA support as well (either built-in or modular,
685 independently of whether this driver is itself built-in or
686 modular) for this driver to work.
688 To compile this driver as a module, choose M here: the
689 module will be called ucb1400_ts.
691 config TOUCHSCREEN_PIXCIR
692 tristate "PIXCIR I2C touchscreens"
695 Say Y here if you have a pixcir i2c touchscreen
700 To compile this driver as a module, choose M here: the
701 module will be called pixcir_i2c_ts.
703 config TOUCHSCREEN_WDT87XX_I2C
704 tristate "Weida HiTech I2C touchscreen"
707 Say Y here if you have a Weida WDT87XX I2C touchscreen
708 connected to your system.
712 To compile this driver as a module, choose M here: the
713 module will be called wdt87xx_i2c.
715 config TOUCHSCREEN_WM831X
716 tristate "Support for WM831x touchscreen controllers"
717 depends on MFD_WM831X
719 This enables support for the touchscreen controller on the WM831x
722 To compile this driver as a module, choose M here: the
723 module will be called wm831x-ts.
725 config TOUCHSCREEN_WM97XX
726 tristate "Support for WM97xx AC97 touchscreen controllers"
729 Say Y here if you have a Wolfson Microelectronics WM97xx
730 touchscreen connected to your system. Note that this option
731 only enables core driver, you will also need to select
732 support for appropriate chip below.
736 To compile this driver as a module, choose M here: the
737 module will be called wm97xx-ts.
739 config TOUCHSCREEN_WM9705
740 bool "WM9705 Touchscreen interface support"
741 depends on TOUCHSCREEN_WM97XX
744 Say Y here to enable support for the Wolfson Microelectronics
745 WM9705 touchscreen controller.
747 config TOUCHSCREEN_WM9712
748 bool "WM9712 Touchscreen interface support"
749 depends on TOUCHSCREEN_WM97XX
752 Say Y here to enable support for the Wolfson Microelectronics
753 WM9712 touchscreen controller.
755 config TOUCHSCREEN_WM9713
756 bool "WM9713 Touchscreen interface support"
757 depends on TOUCHSCREEN_WM97XX
760 Say Y here to enable support for the Wolfson Microelectronics
761 WM9713 touchscreen controller.
763 config TOUCHSCREEN_WM97XX_ATMEL
764 tristate "WM97xx Atmel accelerated touch"
765 depends on TOUCHSCREEN_WM97XX && AVR32
767 Say Y here for support for streaming mode with WM97xx touchscreens
768 on Atmel AT91 or AVR32 systems with an AC97C module.
770 Be aware that this will use channel B in the controller for
771 streaming data, this must not conflict with other AC97C drivers.
775 To compile this driver as a module, choose M here: the module will
776 be called atmel-wm97xx.
778 config TOUCHSCREEN_WM97XX_MAINSTONE
779 tristate "WM97xx Mainstone/Palm accelerated touch"
780 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
782 Say Y here for support for streaming mode with WM97xx touchscreens
783 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
787 To compile this driver as a module, choose M here: the
788 module will be called mainstone-wm97xx.
790 config TOUCHSCREEN_WM97XX_ZYLONITE
791 tristate "Zylonite accelerated touch"
792 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
793 select TOUCHSCREEN_WM9713
795 Say Y here for support for streaming mode with the touchscreen
800 To compile this driver as a module, choose M here: the
801 module will be called zylonite-wm97xx.
803 config TOUCHSCREEN_USB_COMPOSITE
804 tristate "USB Touchscreen Driver"
805 depends on USB_ARCH_HAS_HCD
808 USB Touchscreen driver for:
809 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
810 - PanJit TouchSet USB
811 - 3M MicroTouch USB (EX II series)
813 - some other eTurboTouch
816 - IRTOUCHSYSTEMS/UNITOP
818 - GoTop Super_Q2/GogoPen/PenPower tablets
819 - JASTEC USB Touch Controller/DigiTech DTR-02U
820 - Zytronic controllers
821 - Elo TouchSystems 2700 IntelliTouch
822 - EasyTouch USB Touch Controller from Data Modul
823 - e2i (Mimo monitors)
825 Have a look at <http://linux.chapter7.ch/touchkit/> for
826 a usage description and the required user-space stuff.
828 To compile this driver as a module, choose M here: the
829 module will be called usbtouchscreen.
831 config TOUCHSCREEN_MX25
832 tristate "Freescale i.MX25 touchscreen input driver"
833 depends on MFD_MX25_TSADC
835 Enable support for touchscreen connected to your i.MX25.
837 To compile this driver as a module, choose M here: the
838 module will be called fsl-imx25-tcq.
840 config TOUCHSCREEN_MC13783
841 tristate "Freescale MC13783 touchscreen input driver"
842 depends on MFD_MC13XXX
844 Say Y here if you have an Freescale MC13783 PMIC on your
845 board and want to use its touchscreen
849 To compile this driver as a module, choose M here: the
850 module will be called mc13783_ts.
852 config TOUCHSCREEN_USB_EGALAX
854 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
855 depends on TOUCHSCREEN_USB_COMPOSITE
857 config TOUCHSCREEN_USB_PANJIT
859 bool "PanJit device support" if EXPERT
860 depends on TOUCHSCREEN_USB_COMPOSITE
862 config TOUCHSCREEN_USB_3M
864 bool "3M/Microtouch EX II series device support" if EXPERT
865 depends on TOUCHSCREEN_USB_COMPOSITE
867 config TOUCHSCREEN_USB_ITM
869 bool "ITM device support" if EXPERT
870 depends on TOUCHSCREEN_USB_COMPOSITE
872 config TOUCHSCREEN_USB_ETURBO
874 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
875 depends on TOUCHSCREEN_USB_COMPOSITE
877 config TOUCHSCREEN_USB_GUNZE
879 bool "Gunze AHL61 device support" if EXPERT
880 depends on TOUCHSCREEN_USB_COMPOSITE
882 config TOUCHSCREEN_USB_DMC_TSC10
884 bool "DMC TSC-10/25 device support" if EXPERT
885 depends on TOUCHSCREEN_USB_COMPOSITE
887 config TOUCHSCREEN_USB_IRTOUCH
889 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
890 depends on TOUCHSCREEN_USB_COMPOSITE
892 config TOUCHSCREEN_USB_IDEALTEK
894 bool "IdealTEK URTC1000 device support" if EXPERT
895 depends on TOUCHSCREEN_USB_COMPOSITE
897 config TOUCHSCREEN_USB_GENERAL_TOUCH
899 bool "GeneralTouch Touchscreen device support" if EXPERT
900 depends on TOUCHSCREEN_USB_COMPOSITE
902 config TOUCHSCREEN_USB_GOTOP
904 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
905 depends on TOUCHSCREEN_USB_COMPOSITE
907 config TOUCHSCREEN_USB_JASTEC
909 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
910 depends on TOUCHSCREEN_USB_COMPOSITE
912 config TOUCHSCREEN_USB_ELO
914 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
915 depends on TOUCHSCREEN_USB_COMPOSITE
917 config TOUCHSCREEN_USB_E2I
919 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
920 depends on TOUCHSCREEN_USB_COMPOSITE
922 config TOUCHSCREEN_USB_ZYTRONIC
924 bool "Zytronic controller" if EXPERT
925 depends on TOUCHSCREEN_USB_COMPOSITE
927 config TOUCHSCREEN_USB_ETT_TC45USB
929 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
930 depends on TOUCHSCREEN_USB_COMPOSITE
932 config TOUCHSCREEN_USB_NEXIO
934 bool "NEXIO/iNexio device support" if EXPERT
935 depends on TOUCHSCREEN_USB_COMPOSITE
937 config TOUCHSCREEN_USB_EASYTOUCH
939 bool "EasyTouch USB Touch controller device support" if EMBEDDED
940 depends on TOUCHSCREEN_USB_COMPOSITE
942 Say Y here if you have an EasyTouch USB Touch controller.
945 config TOUCHSCREEN_TOUCHIT213
946 tristate "Sahara TouchIT-213 touchscreen"
949 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
953 To compile this driver as a module, choose M here: the
954 module will be called touchit213.
956 config TOUCHSCREEN_TS4800
957 tristate "TS-4800 touchscreen"
958 depends on HAS_IOMEM && OF
959 depends on SOC_IMX51 || COMPILE_TEST
963 Say Y here if you have a touchscreen on a TS-4800 board.
965 On TS-4800, the touchscreen is not handled directly by Linux but by
970 To compile this driver as a module, choose M here: the
971 module will be called ts4800_ts.
973 config TOUCHSCREEN_TSC_SERIO
974 tristate "TSC-10/25/40 serial touchscreen support"
977 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
982 To compile this driver as a module, choose M here: the
983 module will be called tsc40.
985 config TOUCHSCREEN_TSC200X_CORE
988 config TOUCHSCREEN_TSC2004
989 tristate "TSC2004 based touchscreens"
992 select TOUCHSCREEN_TSC200X_CORE
994 Say Y here if you have a TSC2004 based touchscreen.
998 To compile this driver as a module, choose M here: the
999 module will be called tsc2004.
1001 config TOUCHSCREEN_TSC2005
1002 tristate "TSC2005 based touchscreens"
1003 depends on SPI_MASTER
1005 select TOUCHSCREEN_TSC200X_CORE
1007 Say Y here if you have a TSC2005 based touchscreen.
1011 To compile this driver as a module, choose M here: the
1012 module will be called tsc2005.
1014 config TOUCHSCREEN_TSC2007
1015 tristate "TSC2007 based touchscreens"
1018 Say Y here if you have a TSC2007 based touchscreen.
1022 To compile this driver as a module, choose M here: the
1023 module will be called tsc2007.
1025 config TOUCHSCREEN_W90X900
1026 tristate "W90P910 touchscreen driver"
1027 depends on ARCH_W90X900
1029 Say Y here if you have a W90P910 based touchscreen.
1031 To compile this driver as a module, choose M here: the
1032 module will be called w90p910_ts.
1034 config TOUCHSCREEN_PCAP
1035 tristate "Motorola PCAP touchscreen"
1038 Say Y here if you have a Motorola EZX telephone and
1039 want to enable support for the built-in touchscreen.
1041 To compile this driver as a module, choose M here: the
1042 module will be called pcap_ts.
1044 config TOUCHSCREEN_RM_TS
1045 tristate "Raydium I2C Touchscreen"
1047 depends on GPIOLIB || COMPILE_TEST
1049 Say Y here if you have Raydium series I2C touchscreen,
1050 such as RM32380, connected to your system.
1054 To compile this driver as a module, choose M here: the
1055 module will be called raydium_i2c_ts.
1057 config TOUCHSCREEN_SILEAD
1058 tristate "Silead I2C touchscreen"
1061 Say Y here if you have the Silead touchscreen connected to
1066 To compile this driver as a module, choose M here: the
1067 module will be called silead.
1069 config TOUCHSCREEN_SIS_I2C
1070 tristate "SiS 9200 family I2C touchscreen"
1073 depends on GPIOLIB || COMPILE_TEST
1075 This enables support for SiS 9200 family over I2C based touchscreens.
1079 To compile this driver as a module, choose M here: the
1080 module will be called sis_i2c.
1082 config TOUCHSCREEN_ST1232
1083 tristate "Sitronix ST1232 touchscreen controllers"
1086 Say Y here if you want to support Sitronix ST1232
1087 touchscreen controller.
1091 To compile this driver as a module, choose M here: the
1092 module will be called st1232_ts.
1094 config TOUCHSCREEN_STMPE
1095 tristate "STMicroelectronics STMPE touchscreens"
1096 depends on MFD_STMPE
1097 depends on (OF || COMPILE_TEST)
1099 Say Y here if you want support for STMicroelectronics
1100 STMPE touchscreen controllers.
1102 To compile this driver as a module, choose M here: the
1103 module will be called stmpe-ts.
1105 config TOUCHSCREEN_SUN4I
1106 tristate "Allwinner sun4i resistive touchscreen controller support"
1107 depends on ARCH_SUNXI || COMPILE_TEST
1109 depends on THERMAL || !THERMAL_OF
1111 This selects support for the resistive touchscreen controller
1112 found on Allwinner sunxi SoCs.
1114 To compile this driver as a module, choose M here: the
1115 module will be called sun4i-ts.
1117 config TOUCHSCREEN_SUR40
1118 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1119 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1120 depends on VIDEO_V4L2
1121 select INPUT_POLLDEV
1122 select VIDEOBUF2_DMA_SG
1124 Say Y here if you want support for the Samsung SUR40 touchscreen
1125 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1127 To compile this driver as a module, choose M here: the
1128 module will be called sur40.
1130 config TOUCHSCREEN_SURFACE3_SPI
1131 tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1133 depends on GPIOLIB || COMPILE_TEST
1135 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1136 controller chip as found on the Surface 3 in your system.
1140 To compile this driver as a module, choose M here: the
1141 module will be called surface3_spi.
1143 config TOUCHSCREEN_SX8654
1144 tristate "Semtech SX8654 touchscreen"
1147 Say Y here if you have a Semtech SX8654 touchscreen controller.
1151 To compile this driver as a module, choose M here: the
1152 module will be called sx8654.
1154 config TOUCHSCREEN_TPS6507X
1155 tristate "TPS6507x based touchscreens"
1157 select INPUT_POLLDEV
1159 Say Y here if you have a TPS6507x based touchscreen
1164 To compile this driver as a module, choose M here: the
1165 module will be called tps6507x_ts.
1167 config TOUCHSCREEN_ZFORCE
1168 tristate "Neonode zForce infrared touchscreens"
1170 depends on GPIOLIB || COMPILE_TEST
1172 Say Y here if you have a touchscreen using the zforce
1173 infraread technology from Neonode.
1177 To compile this driver as a module, choose M here: the
1178 module will be called zforce_ts.
1180 config TOUCHSCREEN_COLIBRI_VF50
1181 tristate "Toradex Colibri on board touchscreen driver"
1182 depends on IIO && VF610_ADC
1183 depends on GPIOLIB || COMPILE_TEST
1185 Say Y here if you have a Colibri VF50 and plan to use
1186 the on-board provided 4-wire touchscreen driver.
1190 To compile this driver as a module, choose M here: the
1191 module will be called colibri_vf50_ts.
1193 config TOUCHSCREEN_ROHM_BU21023
1194 tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1197 Say Y here if you have a touchscreen using ROHM BU21023/24.
1201 To compile this driver as a module, choose M here: the
1202 module will be called bu21023_ts.