drivers/isdn/hisax/bkm_a8.c

   1 /* $Id: bkm_a8.c,v 1.22.2.4 2004/01/15 14:02:34 keil Exp $
   2  *
   3  * low level stuff for Scitel Quadro (4*S0, passive)
   4  *
   5  * Author       Roland Klabunde
   6  * Copyright    by Roland Klabunde   <R.Klabunde@Berkom.de>
   7  *
   8  * This software may be used and distributed according to the terms
   9  * of the GNU General Public License, incorporated herein by reference.
  10  *
  11  */
  12
  13
  14 #include <linux/config.h>
  15 #include <linux/init.h>
  16 #include "hisax.h"
  17 #include "isac.h"
  18 #include "ipac.h"
  19 #include "hscx.h"
  20 #include "isdnl1.h"
  21 #include <linux/pci.h>
  22 #include "bkm_ax.h"
  23
  24 #ifdef CONFIG_PCI
  25
  26 #define ATTEMPT_PCI_REMAPPING   /* Required for PLX rev 1 */
  27
  28 extern const char *CardType[];
  29
  30 const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
  31
  32 static const char *sct_quadro_subtypes[] =
  33 {
  34         "",
  35         "#1",
  36         "#2",
  37         "#3",
  38         "#4"
  39 };
  40
  41
  42 #define wordout(addr,val) outw(val,addr)
  43 #define wordin(addr) inw(addr)
  44
  45 static inline u_char
  46 readreg(unsigned int ale, unsigned int adr, u_char off)
  47 {
  48         register u_char ret;
  49         wordout(ale, off);
  50         ret = wordin(adr) & 0xFF;
  51         return (ret);
  52 }
  53
  54 static inline void
  55 readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
  56 {
  57         int i;
  58         wordout(ale, off);
  59         for (i = 0; i < size; i++)
  60                 data[i] = wordin(adr) & 0xFF;
  61 }
  62
  63
  64 static inline void
  65 writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
  66 {
  67         wordout(ale, off);
  68         wordout(adr, data);
  69 }
  70
  71 static inline void
  72 writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
  73 {
  74         int i;
  75         wordout(ale, off);
  76         for (i = 0; i < size; i++)
  77                 wordout(adr, data[i]);
  78 }
  79
  80 /* Interface functions */
  81
  82 static u_char
  83 ReadISAC(struct IsdnCardState *cs, u_char offset)
  84 {
  85         return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80));
  86 }
  87
  88 static void
  89 WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
  90 {
  91         writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80, value);
  92 }
  93
  94 static void
  95 ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
  96 {
  97         readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
  98 }
  99
 100 static void
 101 WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
 102 {
 103         writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
 104 }
 105
 106
 107 static u_char
 108 ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
 109 {
 110         return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0)));
 111 }
 112
 113 static void
 114 WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
 115 {
 116         writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0), value);
 117 }
 118
 119 /* Set the specific ipac to active */
 120 static void
 121 set_ipac_active(struct IsdnCardState *cs, u_int active)
 122 {
 123         /* set irq mask */
 124         writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
 125                 active ? 0xc0 : 0xff);
 126 }
 127
 128 /*
 129  * fast interrupt HSCX stuff goes here
 130  */
 131
 132 #define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
 133         cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
 134 #define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
 135         cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
 136 #define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
 137         cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
 138 #define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
 139         cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
 140
 141 #include "hscx_irq.c"
 142
 143 static irqreturn_t
 144 bkm_interrupt_ipac(int intno, void *dev_id, struct pt_regs *regs)
 145 {
 146         struct IsdnCardState *cs = dev_id;
 147         u_char ista, val, icnt = 5;
 148         u_long flags;
 149
 150         spin_lock_irqsave(&cs->lock, flags);
 151         ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
 152         if (!(ista & 0x3f)) { /* not this IPAC */
 153                 spin_unlock_irqrestore(&cs->lock, flags);
 154                 return IRQ_NONE;
 155         }
 156       Start_IPAC:
 157         if (cs->debug & L1_DEB_IPAC)
 158                 debugl1(cs, "IPAC ISTA %02X", ista);
 159         if (ista & 0x0f) {
 160                 val = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, HSCX_ISTA + 0x40);
 161                 if (ista & 0x01)
 162                         val |= 0x01;
 163                 if (ista & 0x04)
 164                         val |= 0x02;
 165                 if (ista & 0x08)
 166                         val |= 0x04;
 167                 if (val) {
 168                         hscx_int_main(cs, val);
 169                 }
 170         }
 171         if (ista & 0x20) {
 172                 val = 0xfe & readreg(cs->hw.ax.base, cs->hw.ax.data_adr, ISAC_ISTA | 0x80);
 173                 if (val) {
 174                         isac_interrupt(cs, val);
 175                 }
 176         }
 177         if (ista & 0x10) {
 178                 val = 0x01;
 179                 isac_interrupt(cs, val);
 180         }
 181         ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
 182         if ((ista & 0x3f) && icnt) {
 183                 icnt--;
 184                 goto Start_IPAC;
 185         }
 186         if (!icnt)
 187                 printk(KERN_WARNING "HiSax: %s (%s) IRQ LOOP\n",
 188                        CardType[cs->typ],
 189                        sct_quadro_subtypes[cs->subtyp]);
 190         writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
 191         writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
 192         spin_unlock_irqrestore(&cs->lock, flags);
 193         return IRQ_HANDLED;
 194 }
 195
 196 void
 197 release_io_sct_quadro(struct IsdnCardState *cs)
 198 {
 199         release_region(cs->hw.ax.base & 0xffffffc0, 128);
 200         if (cs->subtyp == SCT_1)
 201                 release_region(cs->hw.ax.plx_adr, 64);
 202 }
 203
 204 static void
 205 enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable)
 206 {
 207         if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
 208                 if (bEnable)
 209                         wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) | 0x41));
 210                 else
 211                         wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) & ~0x41));
 212         }
 213 }
 214
 215 static void
 216 reset_bkm(struct IsdnCardState *cs)
 217 {
 218         if (cs->subtyp == SCT_1) {
 219                 wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) & ~4));
 220                 mdelay(10);
 221                 /* Remove the soft reset */
 222                 wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) | 4));
 223                 mdelay(10);
 224         }
 225 }
 226
 227 static int
 228 BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 229 {
 230         u_long flags;
 231
 232         switch (mt) {
 233                 case CARD_RESET:
 234                         spin_lock_irqsave(&cs->lock, flags);
 235                         /* Disable ints */
 236                         set_ipac_active(cs, 0);
 237                         enable_bkm_int(cs, 0);
 238                         reset_bkm(cs);
 239                         spin_unlock_irqrestore(&cs->lock, flags);
 240                         return (0);
 241                 case CARD_RELEASE:
 242                         /* Sanity */
 243                         spin_lock_irqsave(&cs->lock, flags);
 244                         set_ipac_active(cs, 0);
 245                         enable_bkm_int(cs, 0);
 246                         spin_unlock_irqrestore(&cs->lock, flags);
 247                         release_io_sct_quadro(cs);
 248                         return (0);
 249                 case CARD_INIT:
 250                         spin_lock_irqsave(&cs->lock, flags);
 251                         cs->debug |= L1_DEB_IPAC;
 252                         set_ipac_active(cs, 1);
 253                         inithscxisac(cs, 3);
 254                         /* Enable ints */
 255                         enable_bkm_int(cs, 1);
 256                         spin_unlock_irqrestore(&cs->lock, flags);
 257                         return (0);
 258                 case CARD_TEST:
 259                         return (0);
 260         }
 261         return (0);
 262 }
 263
 264 int __init
 265 sct_alloc_io(u_int adr, u_int len)
 266 {
 267         if (!request_region(adr, len, "scitel")) {
 268                 printk(KERN_WARNING
 269                         "HiSax: Scitel port %#x-%#x already in use\n",
 270                         adr, adr + len);
 271                 return (1);
 272         }
 273         return(0);
 274 }
 275
 276 static struct pci_dev *dev_a8 __initdata = NULL;
 277 static u16  sub_vendor_id __initdata = 0;
 278 static u16  sub_sys_id __initdata = 0;
 279 static u_char pci_bus __initdata = 0;
 280 static u_char pci_device_fn __initdata = 0;
 281 static u_char pci_irq __initdata = 0;
 282
 283 #endif /* CONFIG_PCI */
 284
 285 int __init
 286 setup_sct_quadro(struct IsdnCard *card)
 287 {
 288 #ifdef CONFIG_PCI
 289         struct IsdnCardState *cs = card->cs;
 290         char tmp[64];
 291         u_char pci_rev_id;
 292         u_int found = 0;
 293         u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
 294
 295         strcpy(tmp, sct_quadro_revision);
 296         printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
 297         if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
 298                 cs->subtyp = SCT_1;     /* Preset */
 299         } else
 300                 return (0);
 301
 302         /* Identify subtype by para[0] */
 303         if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
 304                 cs->subtyp = card->para[0];
 305         else {
 306                 printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n",
 307                         CardType[card->typ]);
 308                 return (0);
 309         }
 310         if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
 311                 (sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
 312                 return (0);
 313         if (cs->subtyp == SCT_1) {
 314                 while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX,
 315                         PCI_DEVICE_ID_PLX_9050, dev_a8))) {
 316
 317                         sub_vendor_id = dev_a8->subsystem_vendor;
 318                         sub_sys_id = dev_a8->subsystem_device;
 319                         if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
 320                                 (sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
 321                                 if (pci_enable_device(dev_a8))
 322                                         return(0);
 323                                 pci_ioaddr1 = pci_resource_start(dev_a8, 1);
 324                                 pci_irq = dev_a8->irq;
 325                                 pci_bus = dev_a8->bus->number;
 326                                 pci_device_fn = dev_a8->devfn;
 327                                 found = 1;
 328                                 break;
 329                         }
 330                 }
 331                 if (!found) {
 332                         printk(KERN_WARNING "HiSax: %s (%s): Card not found\n",
 333                                 CardType[card->typ],
 334                                 sct_quadro_subtypes[cs->subtyp]);
 335                         return (0);
 336                 }
 337 #ifdef ATTEMPT_PCI_REMAPPING
 338 /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
 339                 pci_read_config_byte(dev_a8, PCI_REVISION_ID, &pci_rev_id);
 340                 if ((pci_ioaddr1 & 0x80) && (pci_rev_id == 1)) {
 341                         printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
 342                                 CardType[card->typ],
 343                                 sct_quadro_subtypes[cs->subtyp]);
 344                         /* Restart PCI negotiation */
 345                         pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
 346                         /* Move up by 0x80 byte */
 347                         pci_ioaddr1 += 0x80;
 348                         pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
 349                         pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
 350                         dev_a8->resource[ 1].start = pci_ioaddr1;
 351                 }
 352 #endif /* End HACK */
 353         }
 354         if (!pci_irq) {         /* IRQ range check ?? */
 355                 printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n",
 356                        CardType[card->typ],
 357                        sct_quadro_subtypes[cs->subtyp]);
 358                 return (0);
 359         }
 360         pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
 361         pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
 362         pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
 363         pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
 364         pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
 365         if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
 366                 printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n",
 367                        CardType[card->typ],
 368                        sct_quadro_subtypes[cs->subtyp]);
 369                 return (0);
 370         }
 371         pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
 372         pci_ioaddr2 &= PCI_BASE_ADDRESS_IO_MASK;
 373         pci_ioaddr3 &= PCI_BASE_ADDRESS_IO_MASK;
 374         pci_ioaddr4 &= PCI_BASE_ADDRESS_IO_MASK;
 375         pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK;
 376         /* Take over */
 377         cs->irq = pci_irq;
 378         cs->irq_flags |= SA_SHIRQ;
 379         /* pci_ioaddr1 is unique to all subdevices */
 380         /* pci_ioaddr2 is for the fourth subdevice only */
 381         /* pci_ioaddr3 is for the third subdevice only */
 382         /* pci_ioaddr4 is for the second subdevice only */
 383         /* pci_ioaddr5 is for the first subdevice only */
 384         cs->hw.ax.plx_adr = pci_ioaddr1;
 385         /* Enter all ipac_base addresses */
 386         switch(cs->subtyp) {
 387                 case 1:
 388                         cs->hw.ax.base = pci_ioaddr5 + 0x00;
 389                         if (sct_alloc_io(pci_ioaddr1, 128))
 390                                 return(0);
 391                         if (sct_alloc_io(pci_ioaddr5, 64))
 392                                 return(0);
 393                         /* disable all IPAC */
 394                         writereg(pci_ioaddr5, pci_ioaddr5 + 4,
 395                                 IPAC_MASK, 0xFF);
 396                         writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
 397                                 IPAC_MASK, 0xFF);
 398                         writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
 399                                 IPAC_MASK, 0xFF);
 400                         writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
 401                                 IPAC_MASK, 0xFF);
 402                         break;
 403                 case 2:
 404                         cs->hw.ax.base = pci_ioaddr4 + 0x08;
 405                         if (sct_alloc_io(pci_ioaddr4, 64))
 406                                 return(0);
 407                         break;
 408                 case 3:
 409                         cs->hw.ax.base = pci_ioaddr3 + 0x10;
 410                         if (sct_alloc_io(pci_ioaddr3, 64))
 411                                 return(0);
 412                         break;
 413                 case 4:
 414                         cs->hw.ax.base = pci_ioaddr2 + 0x20;
 415                         if (sct_alloc_io(pci_ioaddr2, 64))
 416                                 return(0);
 417                         break;
 418         }
 419         /* For isac and hscx data path */
 420         cs->hw.ax.data_adr = cs->hw.ax.base + 4;
 421
 422         printk(KERN_INFO "HiSax: %s (%s) configured at 0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
 423                CardType[card->typ],
 424                sct_quadro_subtypes[cs->subtyp],
 425                cs->hw.ax.plx_adr,
 426                cs->hw.ax.base,
 427                cs->hw.ax.data_adr,
 428                cs->irq);
 429
 430         test_and_set_bit(HW_IPAC, &cs->HW_Flags);
 431
 432         cs->readisac = &ReadISAC;
 433         cs->writeisac = &WriteISAC;
 434         cs->readisacfifo = &ReadISACfifo;
 435         cs->writeisacfifo = &WriteISACfifo;
 436
 437         cs->BC_Read_Reg = &ReadHSCX;
 438         cs->BC_Write_Reg = &WriteHSCX;
 439         cs->BC_Send_Data = &hscx_fill_fifo;
 440         cs->cardmsg = &BKM_card_msg;
 441         cs->irq_func = &bkm_interrupt_ipac;
 442
 443         printk(KERN_INFO "HiSax: %s (%s): IPAC Version %d\n",
 444                 CardType[card->typ],
 445                 sct_quadro_subtypes[cs->subtyp],
 446                 readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
 447         return (1);
 448 #else
 449         printk(KERN_ERR "HiSax: bkm_a8 only supported on PCI Systems\n");
 450 #endif /* CONFIG_PCI */
 451 }