Fix: rseq: arm branch to failure
[deliverable/linux.git] / drivers / mcb / mcb-pci.c
1 /*
2 * MEN Chameleon Bus.
3 *
4 * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
5 * Author: Johannes Thumshirn <johannes.thumshirn@men.de>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the Free
9 * Software Foundation; version 2 of the License.
10 */
11
12 #include <linux/module.h>
13 #include <linux/pci.h>
14 #include <linux/mcb.h>
15
16 #include "mcb-internal.h"
17
18 struct priv {
19 struct mcb_bus *bus;
20 phys_addr_t mapbase;
21 void __iomem *base;
22 };
23
24 static int mcb_pci_get_irq(struct mcb_device *mdev)
25 {
26 struct mcb_bus *mbus = mdev->bus;
27 struct device *dev = mbus->carrier;
28 struct pci_dev *pdev = to_pci_dev(dev);
29
30 return pdev->irq;
31 }
32
33 static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
34 {
35 struct resource *res;
36 struct priv *priv;
37 int ret;
38 unsigned long flags;
39
40 priv = devm_kzalloc(&pdev->dev, sizeof(struct priv), GFP_KERNEL);
41 if (!priv)
42 return -ENOMEM;
43
44 ret = pci_enable_device(pdev);
45 if (ret) {
46 dev_err(&pdev->dev, "Failed to enable PCI device\n");
47 return -ENODEV;
48 }
49
50 priv->mapbase = pci_resource_start(pdev, 0);
51 if (!priv->mapbase) {
52 dev_err(&pdev->dev, "No PCI resource\n");
53 ret = -ENODEV;
54 goto out_disable;
55 }
56
57 res = devm_request_mem_region(&pdev->dev, priv->mapbase,
58 CHAM_HEADER_SIZE,
59 KBUILD_MODNAME);
60 if (!res) {
61 dev_err(&pdev->dev, "Failed to request PCI memory\n");
62 ret = -EBUSY;
63 goto out_disable;
64 }
65
66 priv->base = devm_ioremap(&pdev->dev, priv->mapbase, CHAM_HEADER_SIZE);
67 if (!priv->base) {
68 dev_err(&pdev->dev, "Cannot ioremap\n");
69 ret = -ENOMEM;
70 goto out_disable;
71 }
72
73 flags = pci_resource_flags(pdev, 0);
74 if (flags & IORESOURCE_IO) {
75 ret = -ENOTSUPP;
76 dev_err(&pdev->dev,
77 "IO mapped PCI devices are not supported\n");
78 goto out_disable;
79 }
80
81 pci_set_drvdata(pdev, priv);
82
83 priv->bus = mcb_alloc_bus(&pdev->dev);
84 if (IS_ERR(priv->bus)) {
85 ret = PTR_ERR(priv->bus);
86 goto out_disable;
87 }
88
89 priv->bus->get_irq = mcb_pci_get_irq;
90
91 ret = chameleon_parse_cells(priv->bus, priv->mapbase, priv->base);
92 if (ret < 0)
93 goto out_mcb_bus;
94
95 dev_dbg(&pdev->dev, "Found %d cells\n", ret);
96
97 mcb_bus_add_devices(priv->bus);
98
99 return 0;
100
101 out_mcb_bus:
102 mcb_release_bus(priv->bus);
103 out_disable:
104 pci_disable_device(pdev);
105 return ret;
106 }
107
108 static void mcb_pci_remove(struct pci_dev *pdev)
109 {
110 struct priv *priv = pci_get_drvdata(pdev);
111
112 mcb_release_bus(priv->bus);
113
114 pci_disable_device(pdev);
115 }
116
117 static const struct pci_device_id mcb_pci_tbl[] = {
118 { PCI_DEVICE(PCI_VENDOR_ID_MEN, PCI_DEVICE_ID_MEN_CHAMELEON) },
119 { 0 },
120 };
121 MODULE_DEVICE_TABLE(pci, mcb_pci_tbl);
122
123 static struct pci_driver mcb_pci_driver = {
124 .name = "mcb-pci",
125 .id_table = mcb_pci_tbl,
126 .probe = mcb_pci_probe,
127 .remove = mcb_pci_remove,
128 };
129
130 module_pci_driver(mcb_pci_driver);
131
132 MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>");
133 MODULE_LICENSE("GPL");
134 MODULE_DESCRIPTION("MCB over PCI support");
This page took 0.05813 seconds and 5 git commands to generate.