drivers/mfd/htc-i2cpld.c

   1 /*
   2  *  htc-i2cpld.c
   3  *  Chip driver for an unknown CPLD chip found on omap850 HTC devices like
   4  *  the HTC Wizard and HTC Herald.
   5  *  The cpld is located on the i2c bus and acts as an input/output GPIO
   6  *  extender.
   7  *
   8  *  Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
   9  *
  10  *  Based on work done in the linwizard project
  11  *  Copyright (C) 2008-2009 Angelo Arrifano <miknix@gmail.com>
  12  *
  13  * This program is free software; you can redistribute it and/or modify
  14  * it under the terms of the GNU General Public License as published by
  15  * the Free Software Foundation; either version 2 of the License, or
  16  * (at your option) any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26  */
  27
  28 #include <linux/kernel.h>
  29 #include <linux/init.h>
  30 #include <linux/module.h>
  31 #include <linux/interrupt.h>
  32 #include <linux/platform_device.h>
  33 #include <linux/i2c.h>
  34 #include <linux/irq.h>
  35 #include <linux/spinlock.h>
  36 #include <linux/htcpld.h>
  37 #include <linux/gpio.h>
  38 #include <linux/slab.h>
  39
  40 struct htcpld_chip {
  41         spinlock_t              lock;
  42
  43         /* chip info */
  44         u8                      reset;
  45         u8                      addr;
  46         struct device           *dev;
  47         struct i2c_client       *client;
  48
  49         /* Output details */
  50         u8                      cache_out;
  51         struct gpio_chip        chip_out;
  52
  53         /* Input details */
  54         u8                      cache_in;
  55         struct gpio_chip        chip_in;
  56
  57         u16                     irqs_enabled;
  58         uint                    irq_start;
  59         int                     nirqs;
  60
  61         unsigned int            flow_type;
  62         /*
  63          * Work structure to allow for setting values outside of any
  64          * possible interrupt context
  65          */
  66         struct work_struct set_val_work;
  67 };
  68
  69 struct htcpld_data {
  70         /* irq info */
  71         u16                irqs_enabled;
  72         uint               irq_start;
  73         int                nirqs;
  74         uint               chained_irq;
  75         unsigned int       int_reset_gpio_hi;
  76         unsigned int       int_reset_gpio_lo;
  77
  78         /* htcpld info */
  79         struct htcpld_chip *chip;
  80         unsigned int       nchips;
  81 };
  82
  83 /* There does not appear to be a way to proactively mask interrupts
  84  * on the htcpld chip itself.  So, we simply ignore interrupts that
  85  * aren't desired. */
  86 static void htcpld_mask(struct irq_data *data)
  87 {
  88         struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
  89         chip->irqs_enabled &= ~(1 << (data->irq - chip->irq_start));
  90         pr_debug("HTCPLD mask %d %04x\n", data->irq, chip->irqs_enabled);
  91 }
  92 static void htcpld_unmask(struct irq_data *data)
  93 {
  94         struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
  95         chip->irqs_enabled |= 1 << (data->irq - chip->irq_start);
  96         pr_debug("HTCPLD unmask %d %04x\n", data->irq, chip->irqs_enabled);
  97 }
  98
  99 static int htcpld_set_type(struct irq_data *data, unsigned int flags)
 100 {
 101         struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
 102
 103         if (flags & ~IRQ_TYPE_SENSE_MASK)
 104                 return -EINVAL;
 105
 106         /* We only allow edge triggering */
 107         if (flags & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))
 108                 return -EINVAL;
 109
 110         chip->flow_type = flags;
 111         return 0;
 112 }
 113
 114 static struct irq_chip htcpld_muxed_chip = {
 115         .name         = "htcpld",
 116         .irq_mask     = htcpld_mask,
 117         .irq_unmask   = htcpld_unmask,
 118         .irq_set_type = htcpld_set_type,
 119 };
 120
 121 /* To properly dispatch IRQ events, we need to read from the
 122  * chip.  This is an I2C action that could possibly sleep
 123  * (which is bad in interrupt context) -- so we use a threaded
 124  * interrupt handler to get around that.
 125  */
 126 static irqreturn_t htcpld_handler(int irq, void *dev)
 127 {
 128         struct htcpld_data *htcpld = dev;
 129         unsigned int i;
 130         unsigned long flags;
 131         int irqpin;
 132
 133         if (!htcpld) {
 134                 pr_debug("htcpld is null in ISR\n");
 135                 return IRQ_HANDLED;
 136         }
 137
 138         /*
 139          * For each chip, do a read of the chip and trigger any interrupts
 140          * desired.  The interrupts will be triggered from LSB to MSB (i.e.
 141          * bit 0 first, then bit 1, etc.)
 142          *
 143          * For chips that have no interrupt range specified, just skip 'em.
 144          */
 145         for (i = 0; i < htcpld->nchips; i++) {
 146                 struct htcpld_chip *chip = &htcpld->chip[i];
 147                 struct i2c_client *client;
 148                 int val;
 149                 unsigned long uval, old_val;
 150
 151                 if (!chip) {
 152                         pr_debug("chip %d is null in ISR\n", i);
 153                         continue;
 154                 }
 155
 156                 if (chip->nirqs == 0)
 157                         continue;
 158
 159                 client = chip->client;
 160                 if (!client) {
 161                         pr_debug("client %d is null in ISR\n", i);
 162                         continue;
 163                 }
 164
 165                 /* Scan the chip */
 166                 val = i2c_smbus_read_byte_data(client, chip->cache_out);
 167                 if (val < 0) {
 168                         /* Throw a warning and skip this chip */
 169                         dev_warn(chip->dev, "Unable to read from chip: %d\n",
 170                                  val);
 171                         continue;
 172                 }
 173
 174                 uval = (unsigned long)val;
 175
 176                 spin_lock_irqsave(&chip->lock, flags);
 177
 178                 /* Save away the old value so we can compare it */
 179                 old_val = chip->cache_in;
 180
 181                 /* Write the new value */
 182                 chip->cache_in = uval;
 183
 184                 spin_unlock_irqrestore(&chip->lock, flags);
 185
 186                 /*
 187                  * For each bit in the data (starting at bit 0), trigger
 188                  * associated interrupts.
 189                  */
 190                 for (irqpin = 0; irqpin < chip->nirqs; irqpin++) {
 191                         unsigned oldb, newb, type = chip->flow_type;
 192
 193                         irq = chip->irq_start + irqpin;
 194
 195                         /* Run the IRQ handler, but only if the bit value
 196                          * changed, and the proper flags are set */
 197                         oldb = (old_val >> irqpin) & 1;
 198                         newb = (uval >> irqpin) & 1;
 199
 200                         if ((!oldb && newb && (type & IRQ_TYPE_EDGE_RISING)) ||
 201                             (oldb && !newb && (type & IRQ_TYPE_EDGE_FALLING))) {
 202                                 pr_debug("fire IRQ %d\n", irqpin);
 203                                 generic_handle_irq(irq);
 204                         }
 205                 }
 206         }
 207
 208         /*
 209          * In order to continue receiving interrupts, the int_reset_gpio must
 210          * be asserted.
 211          */
 212         if (htcpld->int_reset_gpio_hi)
 213                 gpio_set_value(htcpld->int_reset_gpio_hi, 1);
 214         if (htcpld->int_reset_gpio_lo)
 215                 gpio_set_value(htcpld->int_reset_gpio_lo, 0);
 216
 217         return IRQ_HANDLED;
 218 }
 219
 220 /*
 221  * The GPIO set routines can be called from interrupt context, especially if,
 222  * for example they're attached to the led-gpio framework and a trigger is
 223  * enabled.  As such, we declared work above in the htcpld_chip structure,
 224  * and that work is scheduled in the set routine.  The kernel can then run
 225  * the I2C functions, which will sleep, in process context.
 226  */
 227 static void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val)
 228 {
 229         struct i2c_client *client;
 230         struct htcpld_chip *chip_data =
 231                 container_of(chip, struct htcpld_chip, chip_out);
 232         unsigned long flags;
 233
 234         client = chip_data->client;
 235         if (!client)
 236                 return;
 237
 238         spin_lock_irqsave(&chip_data->lock, flags);
 239         if (val)
 240                 chip_data->cache_out |= (1 << offset);
 241         else
 242                 chip_data->cache_out &= ~(1 << offset);
 243         spin_unlock_irqrestore(&chip_data->lock, flags);
 244
 245         schedule_work(&(chip_data->set_val_work));
 246 }
 247
 248 static void htcpld_chip_set_ni(struct work_struct *work)
 249 {
 250         struct htcpld_chip *chip_data;
 251         struct i2c_client *client;
 252
 253         chip_data = container_of(work, struct htcpld_chip, set_val_work);
 254         client = chip_data->client;
 255         i2c_smbus_read_byte_data(client, chip_data->cache_out);
 256 }
 257
 258 static int htcpld_chip_get(struct gpio_chip *chip, unsigned offset)
 259 {
 260         struct htcpld_chip *chip_data;
 261         u8 cache;
 262
 263         if (!strncmp(chip->label, "htcpld-out", 10)) {
 264                 chip_data = container_of(chip, struct htcpld_chip, chip_out);
 265                 cache = chip_data->cache_out;
 266         } else if (!strncmp(chip->label, "htcpld-in", 9)) {
 267                 chip_data = container_of(chip, struct htcpld_chip, chip_in);
 268                 cache = chip_data->cache_in;
 269         } else
 270                 return -EINVAL;
 271
 272         return (cache >> offset) & 1;
 273 }
 274
 275 static int htcpld_direction_output(struct gpio_chip *chip,
 276                                         unsigned offset, int value)
 277 {
 278         htcpld_chip_set(chip, offset, value);
 279         return 0;
 280 }
 281
 282 static int htcpld_direction_input(struct gpio_chip *chip,
 283                                         unsigned offset)
 284 {
 285         /*
 286          * No-op: this function can only be called on the input chip.
 287          * We do however make sure the offset is within range.
 288          */
 289         return (offset < chip->ngpio) ? 0 : -EINVAL;
 290 }
 291
 292 static int htcpld_chip_to_irq(struct gpio_chip *chip, unsigned offset)
 293 {
 294         struct htcpld_chip *chip_data;
 295
 296         chip_data = container_of(chip, struct htcpld_chip, chip_in);
 297
 298         if (offset < chip_data->nirqs)
 299                 return chip_data->irq_start + offset;
 300         else
 301                 return -EINVAL;
 302 }
 303
 304 static void htcpld_chip_reset(struct i2c_client *client)
 305 {
 306         struct htcpld_chip *chip_data = i2c_get_clientdata(client);
 307         if (!chip_data)
 308                 return;
 309
 310         i2c_smbus_read_byte_data(
 311                 client, (chip_data->cache_out = chip_data->reset));
 312 }
 313
 314 static int htcpld_setup_chip_irq(
 315                 struct platform_device *pdev,
 316                 int chip_index)
 317 {
 318         struct htcpld_data *htcpld;
 319         struct htcpld_chip *chip;
 320         unsigned int irq, irq_end;
 321
 322         /* Get the platform and driver data */
 323         htcpld = platform_get_drvdata(pdev);
 324         chip = &htcpld->chip[chip_index];
 325
 326         /* Setup irq handlers */
 327         irq_end = chip->irq_start + chip->nirqs;
 328         for (irq = chip->irq_start; irq < irq_end; irq++) {
 329                 irq_set_chip_and_handler(irq, &htcpld_muxed_chip,
 330                                          handle_simple_irq);
 331                 irq_set_chip_data(irq, chip);
 332                 irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 333         }
 334
 335         return 0;
 336 }
 337
 338 static int htcpld_register_chip_i2c(
 339                 struct platform_device *pdev,
 340                 int chip_index)
 341 {
 342         struct htcpld_data *htcpld;
 343         struct device *dev = &pdev->dev;
 344         struct htcpld_core_platform_data *pdata;
 345         struct htcpld_chip *chip;
 346         struct htcpld_chip_platform_data *plat_chip_data;
 347         struct i2c_adapter *adapter;
 348         struct i2c_client *client;
 349         struct i2c_board_info info;
 350
 351         /* Get the platform and driver data */
 352         pdata = dev_get_platdata(dev);
 353         htcpld = platform_get_drvdata(pdev);
 354         chip = &htcpld->chip[chip_index];
 355         plat_chip_data = &pdata->chip[chip_index];
 356
 357         adapter = i2c_get_adapter(pdata->i2c_adapter_id);
 358         if (!adapter) {
 359                 /* Eek, no such I2C adapter!  Bail out. */
 360                 dev_warn(dev, "Chip at i2c address 0x%x: Invalid i2c adapter %d\n",
 361                          plat_chip_data->addr, pdata->i2c_adapter_id);
 362                 return -ENODEV;
 363         }
 364
 365         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
 366                 dev_warn(dev, "i2c adapter %d non-functional\n",
 367                          pdata->i2c_adapter_id);
 368                 return -EINVAL;
 369         }
 370
 371         memset(&info, 0, sizeof(struct i2c_board_info));
 372         info.addr = plat_chip_data->addr;
 373         strlcpy(info.type, "htcpld-chip", I2C_NAME_SIZE);
 374         info.platform_data = chip;
 375
 376         /* Add the I2C device.  This calls the probe() function. */
 377         client = i2c_new_device(adapter, &info);
 378         if (!client) {
 379                 /* I2C device registration failed, contineu with the next */
 380                 dev_warn(dev, "Unable to add I2C device for 0x%x\n",
 381                          plat_chip_data->addr);
 382                 return -ENODEV;
 383         }
 384
 385         i2c_set_clientdata(client, chip);
 386         snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%x", client->addr);
 387         chip->client = client;
 388
 389         /* Reset the chip */
 390         htcpld_chip_reset(client);
 391         chip->cache_in = i2c_smbus_read_byte_data(client, chip->cache_out);
 392
 393         return 0;
 394 }
 395
 396 static void htcpld_unregister_chip_i2c(
 397                 struct platform_device *pdev,
 398                 int chip_index)
 399 {
 400         struct htcpld_data *htcpld;
 401         struct htcpld_chip *chip;
 402
 403         /* Get the platform and driver data */
 404         htcpld = platform_get_drvdata(pdev);
 405         chip = &htcpld->chip[chip_index];
 406
 407         if (chip->client)
 408                 i2c_unregister_device(chip->client);
 409 }
 410
 411 static int htcpld_register_chip_gpio(
 412                 struct platform_device *pdev,
 413                 int chip_index)
 414 {
 415         struct htcpld_data *htcpld;
 416         struct device *dev = &pdev->dev;
 417         struct htcpld_core_platform_data *pdata;
 418         struct htcpld_chip *chip;
 419         struct htcpld_chip_platform_data *plat_chip_data;
 420         struct gpio_chip *gpio_chip;
 421         int ret = 0;
 422
 423         /* Get the platform and driver data */
 424         pdata = dev_get_platdata(dev);
 425         htcpld = platform_get_drvdata(pdev);
 426         chip = &htcpld->chip[chip_index];
 427         plat_chip_data = &pdata->chip[chip_index];
 428
 429         /* Setup the GPIO chips */
 430         gpio_chip = &(chip->chip_out);
 431         gpio_chip->label           = "htcpld-out";
 432         gpio_chip->parent             = dev;
 433         gpio_chip->owner           = THIS_MODULE;
 434         gpio_chip->get             = htcpld_chip_get;
 435         gpio_chip->set             = htcpld_chip_set;
 436         gpio_chip->direction_input = NULL;
 437         gpio_chip->direction_output = htcpld_direction_output;
 438         gpio_chip->base            = plat_chip_data->gpio_out_base;
 439         gpio_chip->ngpio           = plat_chip_data->num_gpios;
 440
 441         gpio_chip = &(chip->chip_in);
 442         gpio_chip->label           = "htcpld-in";
 443         gpio_chip->parent             = dev;
 444         gpio_chip->owner           = THIS_MODULE;
 445         gpio_chip->get             = htcpld_chip_get;
 446         gpio_chip->set             = NULL;
 447         gpio_chip->direction_input = htcpld_direction_input;
 448         gpio_chip->direction_output = NULL;
 449         gpio_chip->to_irq          = htcpld_chip_to_irq;
 450         gpio_chip->base            = plat_chip_data->gpio_in_base;
 451         gpio_chip->ngpio           = plat_chip_data->num_gpios;
 452
 453         /* Add the GPIO chips */
 454         ret = gpiochip_add(&(chip->chip_out));
 455         if (ret) {
 456                 dev_warn(dev, "Unable to register output GPIOs for 0x%x: %d\n",
 457                          plat_chip_data->addr, ret);
 458                 return ret;
 459         }
 460
 461         ret = gpiochip_add(&(chip->chip_in));
 462         if (ret) {
 463                 dev_warn(dev, "Unable to register input GPIOs for 0x%x: %d\n",
 464                          plat_chip_data->addr, ret);
 465                 gpiochip_remove(&(chip->chip_out));
 466                 return ret;
 467         }
 468
 469         return 0;
 470 }
 471
 472 static int htcpld_setup_chips(struct platform_device *pdev)
 473 {
 474         struct htcpld_data *htcpld;
 475         struct device *dev = &pdev->dev;
 476         struct htcpld_core_platform_data *pdata;
 477         int i;
 478
 479         /* Get the platform and driver data */
 480         pdata = dev_get_platdata(dev);
 481         htcpld = platform_get_drvdata(pdev);
 482
 483         /* Setup each chip's output GPIOs */
 484         htcpld->nchips = pdata->num_chip;
 485         htcpld->chip = devm_kzalloc(dev, sizeof(struct htcpld_chip) * htcpld->nchips,
 486                                     GFP_KERNEL);
 487         if (!htcpld->chip) {
 488                 dev_warn(dev, "Unable to allocate memory for chips\n");
 489                 return -ENOMEM;
 490         }
 491
 492         /* Add the chips as best we can */
 493         for (i = 0; i < htcpld->nchips; i++) {
 494                 int ret;
 495
 496                 /* Setup the HTCPLD chips */
 497                 htcpld->chip[i].reset = pdata->chip[i].reset;
 498                 htcpld->chip[i].cache_out = pdata->chip[i].reset;
 499                 htcpld->chip[i].cache_in = 0;
 500                 htcpld->chip[i].dev = dev;
 501                 htcpld->chip[i].irq_start = pdata->chip[i].irq_base;
 502                 htcpld->chip[i].nirqs = pdata->chip[i].num_irqs;
 503
 504                 INIT_WORK(&(htcpld->chip[i].set_val_work), &htcpld_chip_set_ni);
 505                 spin_lock_init(&(htcpld->chip[i].lock));
 506
 507                 /* Setup the interrupts for the chip */
 508                 if (htcpld->chained_irq) {
 509                         ret = htcpld_setup_chip_irq(pdev, i);
 510                         if (ret)
 511                                 continue;
 512                 }
 513
 514                 /* Register the chip with I2C */
 515                 ret = htcpld_register_chip_i2c(pdev, i);
 516                 if (ret)
 517                         continue;
 518
 519
 520                 /* Register the chips with the GPIO subsystem */
 521                 ret = htcpld_register_chip_gpio(pdev, i);
 522                 if (ret) {
 523                         /* Unregister the chip from i2c and continue */
 524                         htcpld_unregister_chip_i2c(pdev, i);
 525                         continue;
 526                 }
 527
 528                 dev_info(dev, "Registered chip at 0x%x\n", pdata->chip[i].addr);
 529         }
 530
 531         return 0;
 532 }
 533
 534 static int htcpld_core_probe(struct platform_device *pdev)
 535 {
 536         struct htcpld_data *htcpld;
 537         struct device *dev = &pdev->dev;
 538         struct htcpld_core_platform_data *pdata;
 539         struct resource *res;
 540         int ret = 0;
 541
 542         if (!dev)
 543                 return -ENODEV;
 544
 545         pdata = dev_get_platdata(dev);
 546         if (!pdata) {
 547                 dev_warn(dev, "Platform data not found for htcpld core!\n");
 548                 return -ENXIO;
 549         }
 550
 551         htcpld = devm_kzalloc(dev, sizeof(struct htcpld_data), GFP_KERNEL);
 552         if (!htcpld)
 553                 return -ENOMEM;
 554
 555         /* Find chained irq */
 556         res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 557         if (res) {
 558                 int flags;
 559                 htcpld->chained_irq = res->start;
 560
 561                 /* Setup the chained interrupt handler */
 562                 flags = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
 563                         IRQF_ONESHOT;
 564                 ret = request_threaded_irq(htcpld->chained_irq,
 565                                            NULL, htcpld_handler,
 566                                            flags, pdev->name, htcpld);
 567                 if (ret) {
 568                         dev_warn(dev, "Unable to setup chained irq handler: %d\n", ret);
 569                         return ret;
 570                 } else
 571                         device_init_wakeup(dev, 0);
 572         }
 573
 574         /* Set the driver data */
 575         platform_set_drvdata(pdev, htcpld);
 576
 577         /* Setup the htcpld chips */
 578         ret = htcpld_setup_chips(pdev);
 579         if (ret)
 580                 return ret;
 581
 582         /* Request the GPIO(s) for the int reset and set them up */
 583         if (pdata->int_reset_gpio_hi) {
 584                 ret = gpio_request(pdata->int_reset_gpio_hi, "htcpld-core");
 585                 if (ret) {
 586                         /*
 587                          * If it failed, that sucks, but we can probably
 588                          * continue on without it.
 589                          */
 590                         dev_warn(dev, "Unable to request int_reset_gpio_hi -- interrupts may not work\n");
 591                         htcpld->int_reset_gpio_hi = 0;
 592                 } else {
 593                         htcpld->int_reset_gpio_hi = pdata->int_reset_gpio_hi;
 594                         gpio_set_value(htcpld->int_reset_gpio_hi, 1);
 595                 }
 596         }
 597
 598         if (pdata->int_reset_gpio_lo) {
 599                 ret = gpio_request(pdata->int_reset_gpio_lo, "htcpld-core");
 600                 if (ret) {
 601                         /*
 602                          * If it failed, that sucks, but we can probably
 603                          * continue on without it.
 604                          */
 605                         dev_warn(dev, "Unable to request int_reset_gpio_lo -- interrupts may not work\n");
 606                         htcpld->int_reset_gpio_lo = 0;
 607                 } else {
 608                         htcpld->int_reset_gpio_lo = pdata->int_reset_gpio_lo;
 609                         gpio_set_value(htcpld->int_reset_gpio_lo, 0);
 610                 }
 611         }
 612
 613         dev_info(dev, "Initialized successfully\n");
 614         return 0;
 615 }
 616
 617 /* The I2C Driver -- used internally */
 618 static const struct i2c_device_id htcpld_chip_id[] = {
 619         { "htcpld-chip", 0 },
 620         { }
 621 };
 622 MODULE_DEVICE_TABLE(i2c, htcpld_chip_id);
 623
 624
 625 static struct i2c_driver htcpld_chip_driver = {
 626         .driver = {
 627                 .name   = "htcpld-chip",
 628         },
 629         .id_table = htcpld_chip_id,
 630 };
 631
 632 /* The Core Driver */
 633 static struct platform_driver htcpld_core_driver = {
 634         .driver = {
 635                 .name = "i2c-htcpld",
 636         },
 637 };
 638
 639 static int __init htcpld_core_init(void)
 640 {
 641         int ret;
 642
 643         /* Register the I2C Chip driver */
 644         ret = i2c_add_driver(&htcpld_chip_driver);
 645         if (ret)
 646                 return ret;
 647
 648         /* Probe for our chips */
 649         return platform_driver_probe(&htcpld_core_driver, htcpld_core_probe);
 650 }
 651
 652 static void __exit htcpld_core_exit(void)
 653 {
 654         i2c_del_driver(&htcpld_chip_driver);
 655         platform_driver_unregister(&htcpld_core_driver);
 656 }
 657
 658 module_init(htcpld_core_init);
 659 module_exit(htcpld_core_exit);
 660
 661 MODULE_AUTHOR("Cory Maccarrone <darkstar6262@gmail.com>");
 662 MODULE_DESCRIPTION("I2C HTC PLD Driver");
 663 MODULE_LICENSE("GPL");
 664