drivers/misc/Kconfig

   1 #
   2 # Misc strange devices
   3 #
   4
   5 # This one has to live outside of the MISC_DEVICES conditional,
   6 # because it may be selected by drivers/platform/x86/hp_accel.
   7 config SENSORS_LIS3LV02D
   8         tristate
   9         depends on INPUT
  10         select INPUT_POLLDEV
  11         default n
  12
  13 menuconfig MISC_DEVICES
  14         bool "Misc devices"
  15         ---help---
  16           Say Y here to get to see options for device drivers from various
  17           different categories. This option alone does not add any kernel code.
  18
  19           If you say N, all options in this submenu will be skipped and disabled.
  20
  21 if MISC_DEVICES
  22
  23 config AD525X_DPOT
  24         tristate "Analog Devices Digital Potentiometers"
  25         depends on (I2C || SPI) && SYSFS
  26         help
  27           If you say yes here, you get support for the Analog Devices
  28           AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
  29           AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
  30           AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
  31           AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
  32           AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
  33           AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
  34           ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270,
  35           AD5271, AD5272, AD5274
  36           digital potentiometer chips.
  37
  38           See Documentation/misc-devices/ad525x_dpot.txt for the
  39           userspace interface.
  40
  41           This driver can also be built as a module.  If so, the module
  42           will be called ad525x_dpot.
  43
  44 config AD525X_DPOT_I2C
  45         tristate "support I2C bus connection"
  46         depends on AD525X_DPOT && I2C
  47         help
  48           Say Y here if you have a digital potentiometers hooked to an I2C bus.
  49
  50           To compile this driver as a module, choose M here: the
  51           module will be called ad525x_dpot-i2c.
  52
  53 config AD525X_DPOT_SPI
  54         tristate "support SPI bus connection"
  55         depends on AD525X_DPOT && SPI_MASTER
  56         help
  57           Say Y here if you have a digital potentiometers hooked to an SPI bus.
  58
  59           If unsure, say N (but it's safe to say "Y").
  60
  61           To compile this driver as a module, choose M here: the
  62           module will be called ad525x_dpot-spi.
  63
  64 config ATMEL_PWM
  65         tristate "Atmel AT32/AT91 PWM support"
  66         depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
  67         help
  68           This option enables device driver support for the PWM channels
  69           on certain Atmel processors.  Pulse Width Modulation is used for
  70           purposes including software controlled power-efficient backlights
  71           on LCD displays, motor control, and waveform generation.
  72
  73 config AB8500_PWM
  74         bool "AB8500 PWM support"
  75         depends on AB8500_CORE && ARCH_U8500
  76         select HAVE_PWM
  77         help
  78           This driver exports functions to enable/disble/config/free Pulse
  79           Width Modulation in the Analog Baseband Chip AB8500.
  80           It is used by led and backlight driver to control the intensity.
  81
  82 config ATMEL_TCLIB
  83         bool "Atmel AT32/AT91 Timer/Counter Library"
  84         depends on (AVR32 || ARCH_AT91)
  85         help
  86           Select this if you want a library to allocate the Timer/Counter
  87           blocks found on many Atmel processors.  This facilitates using
  88           these blocks by different drivers despite processor differences.
  89
  90 config ATMEL_TCB_CLKSRC
  91         bool "TC Block Clocksource"
  92         depends on ATMEL_TCLIB
  93         default y
  94         help
  95           Select this to get a high precision clocksource based on a
  96           TC block with a 5+ MHz base clock rate.  Two timer channels
  97           are combined to make a single 32-bit timer.
  98
  99           When GENERIC_CLOCKEVENTS is defined, the third timer channel
 100           may be used as a clock event device supporting oneshot mode
 101           (delays of up to two seconds) based on the 32 KiHz clock.
 102
 103 config ATMEL_TCB_CLKSRC_BLOCK
 104         int
 105         depends on ATMEL_TCB_CLKSRC
 106         prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
 107         default 0
 108         range 0 1
 109         help
 110           Some chips provide more than one TC block, so you have the
 111           choice of which one to use for the clock framework.  The other
 112           TC can be used for other purposes, such as PWM generation and
 113           interval timing.
 114
 115 config IBM_ASM
 116         tristate "Device driver for IBM RSA service processor"
 117         depends on X86 && PCI && INPUT && EXPERIMENTAL
 118         ---help---
 119           This option enables device driver support for in-band access to the
 120           IBM RSA (Condor) service processor in eServer xSeries systems.
 121           The ibmasm device driver allows user space application to access
 122           ASM (Advanced Systems Management) functions on the service
 123           processor. The driver is meant to be used in conjunction with
 124           a user space API.
 125           The ibmasm driver also enables the OS to use the UART on the
 126           service processor board as a regular serial port. To make use of
 127           this feature serial driver support (CONFIG_SERIAL_8250) must be
 128           enabled.
 129
 130           WARNING: This software may not be supported or function
 131           correctly on your IBM server. Please consult the IBM ServerProven
 132           website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
 133           for information on the specific driver level and support statement
 134           for your IBM server.
 135
 136 config PHANTOM
 137         tristate "Sensable PHANToM (PCI)"
 138         depends on PCI
 139         help
 140           Say Y here if you want to build a driver for Sensable PHANToM device.
 141
 142           This driver is only for PCI PHANToMs.
 143
 144           If you choose to build module, its name will be phantom. If unsure,
 145           say N here.
 146
 147 config SGI_IOC4
 148         tristate "SGI IOC4 Base IO support"
 149         depends on PCI
 150         ---help---
 151           This option enables basic support for the IOC4 chip on certain
 152           SGI IO controller cards (IO9, IO10, and PCI-RT).  This option
 153           does not enable any specific functions on such a card, but provides
 154           necessary infrastructure for other drivers to utilize.
 155
 156           If you have an SGI Altix with an IOC4-based card say Y.
 157           Otherwise say N.
 158
 159 config TIFM_CORE
 160         tristate "TI Flash Media interface support (EXPERIMENTAL)"
 161         depends on EXPERIMENTAL && PCI
 162         help
 163           If you want support for Texas Instruments(R) Flash Media adapters
 164           you should select this option and then also choose an appropriate
 165           host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
 166           support', if you have a TI PCI74xx compatible card reader, for
 167           example.
 168           You will also have to select some flash card format drivers. MMC/SD
 169           cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
 170           Interface support (MMC_TIFM_SD)'.
 171
 172           To compile this driver as a module, choose M here: the module will
 173           be called tifm_core.
 174
 175 config TIFM_7XX1
 176         tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)"
 177         depends on PCI && TIFM_CORE && EXPERIMENTAL
 178         default TIFM_CORE
 179         help
 180           This option enables support for Texas Instruments(R) PCI74xx and
 181           PCI76xx families of Flash Media adapters, found in many laptops.
 182           To make actual use of the device, you will have to select some
 183           flash card format drivers, as outlined in the TIFM_CORE Help.
 184
 185           To compile this driver as a module, choose M here: the module will
 186           be called tifm_7xx1.
 187
 188 config ICS932S401
 189         tristate "Integrated Circuits ICS932S401"
 190         depends on I2C && EXPERIMENTAL
 191         help
 192           If you say yes here you get support for the Integrated Circuits
 193           ICS932S401 clock control chips.
 194
 195           This driver can also be built as a module. If so, the module
 196           will be called ics932s401.
 197
 198 config ATMEL_SSC
 199         tristate "Device driver for Atmel SSC peripheral"
 200         depends on AVR32 || ARCH_AT91
 201         ---help---
 202           This option enables device driver support for Atmel Synchronized
 203           Serial Communication peripheral (SSC).
 204
 205           The SSC peripheral supports a wide variety of serial frame based
 206           communications, i.e. I2S, SPI, etc.
 207
 208           If unsure, say N.
 209
 210 config ENCLOSURE_SERVICES
 211         tristate "Enclosure Services"
 212         default n
 213         help
 214           Provides support for intelligent enclosures (bays which
 215           contain storage devices).  You also need either a host
 216           driver (SCSI/ATA) which supports enclosures
 217           or a SCSI enclosure device (SES) to use these services.
 218
 219 config SGI_XP
 220         tristate "Support communication between SGI SSIs"
 221         depends on NET
 222         depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP
 223         select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
 224         select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
 225         select SGI_GRU if X86_64 && SMP
 226         ---help---
 227           An SGI machine can be divided into multiple Single System
 228           Images which act independently of each other and have
 229           hardware based memory protection from the others.  Enabling
 230           this feature will allow for direct communication between SSIs
 231           based on a network adapter and DMA messaging.
 232
 233 config CS5535_MFGPT
 234         tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
 235         depends on PCI
 236         depends on X86
 237         default n
 238         help
 239           This driver provides access to MFGPT functionality for other
 240           drivers that need timers.  MFGPTs are available in the CS5535 and
 241           CS5536 companion chips that are found in AMD Geode and several
 242           other platforms.  They have a better resolution and max interval
 243           than the generic PIT, and are suitable for use as high-res timers.
 244           You probably don't want to enable this manually; other drivers that
 245           make use of it should enable it.
 246
 247 config CS5535_MFGPT_DEFAULT_IRQ
 248         int
 249         depends on CS5535_MFGPT
 250         default 7
 251         help
 252           MFGPTs on the CS5535 require an interrupt.  The selected IRQ
 253           can be overridden as a module option as well as by driver that
 254           use the cs5535_mfgpt_ API; however, different architectures might
 255           want to use a different IRQ by default.  This is here for
 256           architectures to set as necessary.
 257
 258 config CS5535_CLOCK_EVENT_SRC
 259         tristate "CS5535/CS5536 high-res timer (MFGPT) events"
 260         depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
 261         help
 262           This driver provides a clock event source based on the MFGPT
 263           timer(s) in the CS5535 and CS5536 companion chips.
 264           MFGPTs have a better resolution and max interval than the
 265           generic PIT, and are suitable for use as high-res timers.
 266
 267 config HP_ILO
 268         tristate "Channel interface driver for the HP iLO processor"
 269         depends on PCI
 270         default n
 271         help
 272           The channel interface driver allows applications to communicate
 273           with iLO management processors present on HP ProLiant servers.
 274           Upon loading, the driver creates /dev/hpilo/dXccbN files, which
 275           can be used to gather data from the management processor, via
 276           read and write system calls.
 277
 278           To compile this driver as a module, choose M here: the
 279           module will be called hpilo.
 280
 281 config SGI_GRU
 282         tristate "SGI GRU driver"
 283         depends on X86_UV && SMP
 284         default n
 285         select MMU_NOTIFIER
 286         ---help---
 287         The GRU is a hardware resource located in the system chipset. The GRU
 288         contains memory that can be mmapped into the user address space. This memory is
 289         used to communicate with the GRU to perform functions such as load/store,
 290         scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user
 291         instructions using user virtual addresses. GRU instructions (ex., bcopy) use
 292         user virtual addresses for operands.
 293
 294         If you are not running on a SGI UV system, say N.
 295
 296 config SGI_GRU_DEBUG
 297         bool  "SGI GRU driver debug"
 298         depends on SGI_GRU
 299         default n
 300         ---help---
 301         This option enables addition debugging code for the SGI GRU driver. If
 302         you are unsure, say N.
 303
 304 config APDS9802ALS
 305         tristate "Medfield Avago APDS9802 ALS Sensor module"
 306         depends on I2C
 307         help
 308           If you say yes here you get support for the ALS APDS9802 ambient
 309           light sensor.
 310
 311           This driver can also be built as a module.  If so, the module
 312           will be called apds9802als.
 313
 314 config ISL29003
 315         tristate "Intersil ISL29003 ambient light sensor"
 316         depends on I2C && SYSFS
 317         help
 318           If you say yes here you get support for the Intersil ISL29003
 319           ambient light sensor.
 320
 321           This driver can also be built as a module.  If so, the module
 322           will be called isl29003.
 323
 324 config ISL29020
 325         tristate "Intersil ISL29020 ambient light sensor"
 326         depends on I2C
 327         help
 328           If you say yes here you get support for the Intersil ISL29020
 329           ambient light sensor.
 330
 331           This driver can also be built as a module.  If so, the module
 332           will be called isl29020.
 333
 334 config SENSORS_TSL2550
 335         tristate "Taos TSL2550 ambient light sensor"
 336         depends on I2C && SYSFS
 337         help
 338           If you say yes here you get support for the Taos TSL2550
 339           ambient light sensor.
 340
 341           This driver can also be built as a module.  If so, the module
 342           will be called tsl2550.
 343
 344 config SENSORS_BH1780
 345         tristate "ROHM BH1780GLI ambient light sensor"
 346         depends on I2C && SYSFS
 347         help
 348           If you say yes here you get support for the ROHM BH1780GLI
 349           ambient light sensor.
 350
 351           This driver can also be built as a module.  If so, the module
 352           will be called bh1780gli.
 353
 354 config SENSORS_BH1770
 355          tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"
 356          depends on I2C
 357          ---help---
 358            Say Y here if you want to build a driver for BH1770GLC (ROHM) or
 359            SFH7770 (Osram) combined ambient light and proximity sensor chip.
 360
 361            To compile this driver as a module, choose M here: the
 362            module will be called bh1770glc. If unsure, say N here.
 363
 364 config SENSORS_APDS990X
 365          tristate "APDS990X combined als and proximity sensors"
 366          depends on I2C
 367          default n
 368          ---help---
 369            Say Y here if you want to build a driver for Avago APDS990x
 370            combined ambient light and proximity sensor chip.
 371
 372            To compile this driver as a module, choose M here: the
 373            module will be called apds990x. If unsure, say N here.
 374
 375 config HMC6352
 376         tristate "Honeywell HMC6352 compass"
 377         depends on I2C
 378         help
 379           This driver provides support for the Honeywell HMC6352 compass,
 380           providing configuration and heading data via sysfs.
 381
 382 config EP93XX_PWM
 383         tristate "EP93xx PWM support"
 384         depends on ARCH_EP93XX
 385         help
 386           This option enables device driver support for the PWM channels
 387           on the Cirrus EP93xx processors.  The EP9307 chip only has one
 388           PWM channel all the others have two, the second channel is an
 389           alternate function of the EGPIO14 pin.  A sysfs interface is
 390           provided to control the PWM channels.
 391
 392           To compile this driver as a module, choose M here: the module will
 393           be called ep93xx_pwm.
 394
 395 config DS1682
 396         tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
 397         depends on I2C && EXPERIMENTAL
 398         help
 399           If you say yes here you get support for Dallas Semiconductor
 400           DS1682 Total Elapsed Time Recorder.
 401
 402           This driver can also be built as a module.  If so, the module
 403           will be called ds1682.
 404
 405 config TI_DAC7512
 406         tristate "Texas Instruments DAC7512"
 407         depends on SPI && SYSFS
 408         help
 409           If you say yes here you get support for the Texas Instruments
 410           DAC7512 16-bit digital-to-analog converter.
 411
 412           This driver can also be built as a module. If so, the module
 413           will be called ti_dac7512.
 414
 415 config VMWARE_BALLOON
 416         tristate "VMware Balloon Driver"
 417         depends on X86
 418         help
 419           This is VMware physical memory management driver which acts
 420           like a "balloon" that can be inflated to reclaim physical pages
 421           by reserving them in the guest and invalidating them in the
 422           monitor, freeing up the underlying machine pages so they can
 423           be allocated to other guests. The balloon can also be deflated
 424           to allow the guest to use more physical memory.
 425
 426           If unsure, say N.
 427
 428           To compile this driver as a module, choose M here: the
 429           module will be called vmw_balloon.
 430
 431 config ARM_CHARLCD
 432         bool "ARM Ltd. Character LCD Driver"
 433         depends on PLAT_VERSATILE
 434         help
 435           This is a driver for the character LCD found on the ARM Ltd.
 436           Versatile and RealView Platform Baseboards. It doesn't do
 437           very much more than display the text "ARM Linux" on the first
 438           line and the Linux version on the second line, but that's
 439           still useful.
 440
 441 config BMP085
 442         tristate "BMP085 digital pressure sensor"
 443         depends on I2C && SYSFS
 444         help
 445           If you say yes here you get support for the Bosch Sensortec
 446           BMP085 digital pressure sensor.
 447
 448           To compile this driver as a module, choose M here: the
 449           module will be called bmp085.
 450
 451 config PCH_PHUB
 452         tristate "PCH Packet Hub of Intel Topcliff / OKI SEMICONDUCTOR ML7213"
 453         depends on PCI
 454         help
 455           This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
 456           Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded
 457           processor. The Topcliff has MAC address and Option ROM data in SROM.
 458           This driver can access MAC address and Option ROM data in SROM.
 459
 460           This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
 461           for IVI(In-Vehicle Infotainment) use.
 462           ML7213 is companion chip for Intel Atom E6xx series.
 463           ML7213 is completely compatible for Intel EG20T PCH.
 464
 465           To compile this driver as a module, choose M here: the module will
 466           be called pch_phub.
 467
 468 source "drivers/misc/c2port/Kconfig"
 469 source "drivers/misc/eeprom/Kconfig"
 470 source "drivers/misc/cb710/Kconfig"
 471 source "drivers/misc/iwmc3200top/Kconfig"
 472 source "drivers/misc/ti-st/Kconfig"
 473 source "drivers/misc/lis3lv02d/Kconfig"
 474
 475 endif # MISC_DEVICES