drivers/net/ethernet/cavium/liquidio/cn66xx_device.c

   1 /**********************************************************************
   2 * Author: Cavium, Inc.
   3 *
   4 * Contact: support@cavium.com
   5 *          Please include "LiquidIO" in the subject.
   6 *
   7 * Copyright (c) 2003-2015 Cavium, Inc.
   8 *
   9 * This file is free software; you can redistribute it and/or modify
  10 * it under the terms of the GNU General Public License, Version 2, as
  11 * published by the Free Software Foundation.
  12 *
  13 * This file is distributed in the hope that it will be useful, but
  14 * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
  15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
  16 * NONINFRINGEMENT.  See the GNU General Public License for more
  17 * details.
  18 *
  19 * This file may also be available under a different license from Cavium.
  20 * Contact Cavium, Inc. for more information
  21 **********************************************************************/
  22 #include <linux/pci.h>
  23 #include <linux/netdevice.h>
  24 #include "liquidio_common.h"
  25 #include "octeon_droq.h"
  26 #include "octeon_iq.h"
  27 #include "response_manager.h"
  28 #include "octeon_device.h"
  29 #include "octeon_main.h"
  30 #include "cn66xx_regs.h"
  31 #include "cn66xx_device.h"
  32
  33 int lio_cn6xxx_soft_reset(struct octeon_device *oct)
  34 {
  35         octeon_write_csr64(oct, CN6XXX_WIN_WR_MASK_REG, 0xFF);
  36
  37         dev_dbg(&oct->pci_dev->dev, "BIST enabled for soft reset\n");
  38
  39         lio_pci_writeq(oct, 1, CN6XXX_CIU_SOFT_BIST);
  40         octeon_write_csr64(oct, CN6XXX_SLI_SCRATCH1, 0x1234ULL);
  41
  42         lio_pci_readq(oct, CN6XXX_CIU_SOFT_RST);
  43         lio_pci_writeq(oct, 1, CN6XXX_CIU_SOFT_RST);
  44
  45         /* make sure that the reset is written before starting timer */
  46         mmiowb();
  47
  48         /* Wait for 10ms as Octeon resets. */
  49         mdelay(100);
  50
  51         if (octeon_read_csr64(oct, CN6XXX_SLI_SCRATCH1) == 0x1234ULL) {
  52                 dev_err(&oct->pci_dev->dev, "Soft reset failed\n");
  53                 return 1;
  54         }
  55
  56         dev_dbg(&oct->pci_dev->dev, "Reset completed\n");
  57         octeon_write_csr64(oct, CN6XXX_WIN_WR_MASK_REG, 0xFF);
  58
  59         return 0;
  60 }
  61
  62 void lio_cn6xxx_enable_error_reporting(struct octeon_device *oct)
  63 {
  64         u32 val;
  65
  66         pci_read_config_dword(oct->pci_dev, CN6XXX_PCIE_DEVCTL, &val);
  67         if (val & 0x000c0000) {
  68                 dev_err(&oct->pci_dev->dev, "PCI-E Link error detected: 0x%08x\n",
  69                         val & 0x000c0000);
  70         }
  71
  72         val |= 0xf;          /* Enable Link error reporting */
  73
  74         dev_dbg(&oct->pci_dev->dev, "Enabling PCI-E error reporting..\n");
  75         pci_write_config_dword(oct->pci_dev, CN6XXX_PCIE_DEVCTL, val);
  76 }
  77
  78 void lio_cn6xxx_setup_pcie_mps(struct octeon_device *oct,
  79                                enum octeon_pcie_mps mps)
  80 {
  81         u32 val;
  82         u64 r64;
  83
  84         /* Read config register for MPS */
  85         pci_read_config_dword(oct->pci_dev, CN6XXX_PCIE_DEVCTL, &val);
  86
  87         if (mps == PCIE_MPS_DEFAULT) {
  88                 mps = ((val & (0x7 << 5)) >> 5);
  89         } else {
  90                 val &= ~(0x7 << 5);  /* Turn off any MPS bits */
  91                 val |= (mps << 5);   /* Set MPS */
  92                 pci_write_config_dword(oct->pci_dev, CN6XXX_PCIE_DEVCTL, val);
  93         }
  94
  95         /* Set MPS in DPI_SLI_PRT0_CFG to the same value. */
  96         r64 = lio_pci_readq(oct, CN6XXX_DPI_SLI_PRTX_CFG(oct->pcie_port));
  97         r64 |= (mps << 4);
  98         lio_pci_writeq(oct, r64, CN6XXX_DPI_SLI_PRTX_CFG(oct->pcie_port));
  99 }
 100
 101 void lio_cn6xxx_setup_pcie_mrrs(struct octeon_device *oct,
 102                                 enum octeon_pcie_mrrs mrrs)
 103 {
 104         u32 val;
 105         u64 r64;
 106
 107         /* Read config register for MRRS */
 108         pci_read_config_dword(oct->pci_dev, CN6XXX_PCIE_DEVCTL, &val);
 109
 110         if (mrrs == PCIE_MRRS_DEFAULT) {
 111                 mrrs = ((val & (0x7 << 12)) >> 12);
 112         } else {
 113                 val &= ~(0x7 << 12); /* Turn off any MRRS bits */
 114                 val |= (mrrs << 12); /* Set MRRS */
 115                 pci_write_config_dword(oct->pci_dev, CN6XXX_PCIE_DEVCTL, val);
 116         }
 117
 118         /* Set MRRS in SLI_S2M_PORT0_CTL to the same value. */
 119         r64 = octeon_read_csr64(oct, CN6XXX_SLI_S2M_PORTX_CTL(oct->pcie_port));
 120         r64 |= mrrs;
 121         octeon_write_csr64(oct, CN6XXX_SLI_S2M_PORTX_CTL(oct->pcie_port), r64);
 122
 123         /* Set MRRS in DPI_SLI_PRT0_CFG to the same value. */
 124         r64 = lio_pci_readq(oct, CN6XXX_DPI_SLI_PRTX_CFG(oct->pcie_port));
 125         r64 |= mrrs;
 126         lio_pci_writeq(oct, r64, CN6XXX_DPI_SLI_PRTX_CFG(oct->pcie_port));
 127 }
 128
 129 u32 lio_cn6xxx_coprocessor_clock(struct octeon_device *oct)
 130 {
 131         /* Bits 29:24 of MIO_RST_BOOT holds the ref. clock multiplier
 132          * for SLI.
 133          */
 134         return ((lio_pci_readq(oct, CN6XXX_MIO_RST_BOOT) >> 24) & 0x3f) * 50;
 135 }
 136
 137 u32 lio_cn6xxx_get_oq_ticks(struct octeon_device *oct,
 138                             u32 time_intr_in_us)
 139 {
 140         /* This gives the SLI clock per microsec */
 141         u32 oqticks_per_us = lio_cn6xxx_coprocessor_clock(oct);
 142
 143         /* core clock per us / oq ticks will be fractional. TO avoid that
 144          * we use the method below.
 145          */
 146
 147         /* This gives the clock cycles per millisecond */
 148         oqticks_per_us *= 1000;
 149
 150         /* This gives the oq ticks (1024 core clock cycles) per millisecond */
 151         oqticks_per_us /= 1024;
 152
 153         /* time_intr is in microseconds. The next 2 steps gives the oq ticks
 154          * corressponding to time_intr.
 155          */
 156         oqticks_per_us *= time_intr_in_us;
 157         oqticks_per_us /= 1000;
 158
 159         return oqticks_per_us;
 160 }
 161
 162 void lio_cn6xxx_setup_global_input_regs(struct octeon_device *oct)
 163 {
 164         /* Select Round-Robin Arb, ES, RO, NS for Input Queues */
 165         octeon_write_csr(oct, CN6XXX_SLI_PKT_INPUT_CONTROL,
 166                          CN6XXX_INPUT_CTL_MASK);
 167
 168         /* Instruction Read Size - Max 4 instructions per PCIE Read */
 169         octeon_write_csr64(oct, CN6XXX_SLI_PKT_INSTR_RD_SIZE,
 170                            0xFFFFFFFFFFFFFFFFULL);
 171
 172         /* Select PCIE Port for all Input rings. */
 173         octeon_write_csr64(oct, CN6XXX_SLI_IN_PCIE_PORT,
 174                            (oct->pcie_port * 0x5555555555555555ULL));
 175 }
 176
 177 static void lio_cn66xx_setup_pkt_ctl_regs(struct octeon_device *oct)
 178 {
 179         u64 pktctl;
 180
 181         struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
 182
 183         pktctl = octeon_read_csr64(oct, CN6XXX_SLI_PKT_CTL);
 184
 185         /* 66XX SPECIFIC */
 186         if (CFG_GET_OQ_MAX_Q(cn6xxx->conf) <= 4)
 187                 /* Disable RING_EN if only upto 4 rings are used. */
 188                 pktctl &= ~(1 << 4);
 189         else
 190                 pktctl |= (1 << 4);
 191
 192         if (CFG_GET_IS_SLI_BP_ON(cn6xxx->conf))
 193                 pktctl |= 0xF;
 194         else
 195                 /* Disable per-port backpressure. */
 196                 pktctl &= ~0xF;
 197         octeon_write_csr64(oct, CN6XXX_SLI_PKT_CTL, pktctl);
 198 }
 199
 200 void lio_cn6xxx_setup_global_output_regs(struct octeon_device *oct)
 201 {
 202         u32 time_threshold;
 203         struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
 204
 205         /* / Select PCI-E Port for all Output queues */
 206         octeon_write_csr64(oct, CN6XXX_SLI_PKT_PCIE_PORT64,
 207                            (oct->pcie_port * 0x5555555555555555ULL));
 208
 209         if (CFG_GET_IS_SLI_BP_ON(cn6xxx->conf)) {
 210                 octeon_write_csr64(oct, CN6XXX_SLI_OQ_WMARK, 32);
 211         } else {
 212                 /* / Set Output queue watermark to 0 to disable backpressure */
 213                 octeon_write_csr64(oct, CN6XXX_SLI_OQ_WMARK, 0);
 214         }
 215
 216         /* / Select Info Ptr for length & data */
 217         octeon_write_csr(oct, CN6XXX_SLI_PKT_IPTR, 0xFFFFFFFF);
 218
 219         /* / Select Packet count instead of bytes for SLI_PKTi_CNTS[CNT] */
 220         octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_BMODE, 0);
 221
 222         /* Select ES, RO, NS setting from register for Output Queue Packet
 223          * Address
 224          */
 225         octeon_write_csr(oct, CN6XXX_SLI_PKT_DPADDR, 0xFFFFFFFF);
 226
 227         /* No Relaxed Ordering, No Snoop, 64-bit swap for Output
 228          * Queue ScatterList
 229          */
 230         octeon_write_csr(oct, CN6XXX_SLI_PKT_SLIST_ROR, 0);
 231         octeon_write_csr(oct, CN6XXX_SLI_PKT_SLIST_NS, 0);
 232
 233         /* / ENDIAN_SPECIFIC CHANGES - 0 works for LE. */
 234 #ifdef __BIG_ENDIAN_BITFIELD
 235         octeon_write_csr64(oct, CN6XXX_SLI_PKT_SLIST_ES64,
 236                            0x5555555555555555ULL);
 237 #else
 238         octeon_write_csr64(oct, CN6XXX_SLI_PKT_SLIST_ES64, 0ULL);
 239 #endif
 240
 241         /* / No Relaxed Ordering, No Snoop, 64-bit swap for Output Queue Data */
 242         octeon_write_csr(oct, CN6XXX_SLI_PKT_DATA_OUT_ROR, 0);
 243         octeon_write_csr(oct, CN6XXX_SLI_PKT_DATA_OUT_NS, 0);
 244         octeon_write_csr64(oct, CN6XXX_SLI_PKT_DATA_OUT_ES64,
 245                            0x5555555555555555ULL);
 246
 247         /* / Set up interrupt packet and time threshold */
 248         octeon_write_csr(oct, CN6XXX_SLI_OQ_INT_LEVEL_PKTS,
 249                          (u32)CFG_GET_OQ_INTR_PKT(cn6xxx->conf));
 250         time_threshold =
 251                 lio_cn6xxx_get_oq_ticks(oct, (u32)
 252                                         CFG_GET_OQ_INTR_TIME(cn6xxx->conf));
 253
 254         octeon_write_csr(oct, CN6XXX_SLI_OQ_INT_LEVEL_TIME, time_threshold);
 255 }
 256
 257 static int lio_cn6xxx_setup_device_regs(struct octeon_device *oct)
 258 {
 259         lio_cn6xxx_setup_pcie_mps(oct, PCIE_MPS_DEFAULT);
 260         lio_cn6xxx_setup_pcie_mrrs(oct, PCIE_MRRS_512B);
 261         lio_cn6xxx_enable_error_reporting(oct);
 262
 263         lio_cn6xxx_setup_global_input_regs(oct);
 264         lio_cn66xx_setup_pkt_ctl_regs(oct);
 265         lio_cn6xxx_setup_global_output_regs(oct);
 266
 267         /* Default error timeout value should be 0x200000 to avoid host hang
 268          * when reads invalid register
 269          */
 270         octeon_write_csr64(oct, CN6XXX_SLI_WINDOW_CTL, 0x200000ULL);
 271         return 0;
 272 }
 273
 274 void lio_cn6xxx_setup_iq_regs(struct octeon_device *oct, u32 iq_no)
 275 {
 276         struct octeon_instr_queue *iq = oct->instr_queue[iq_no];
 277
 278         /* Disable Packet-by-Packet mode; No Parse Mode or Skip length */
 279         octeon_write_csr64(oct, CN6XXX_SLI_IQ_PKT_INSTR_HDR64(iq_no), 0);
 280
 281         /* Write the start of the input queue's ring and its size  */
 282         octeon_write_csr64(oct, CN6XXX_SLI_IQ_BASE_ADDR64(iq_no),
 283                            iq->base_addr_dma);
 284         octeon_write_csr(oct, CN6XXX_SLI_IQ_SIZE(iq_no), iq->max_count);
 285
 286         /* Remember the doorbell & instruction count register addr for this
 287          * queue
 288          */
 289         iq->doorbell_reg = oct->mmio[0].hw_addr + CN6XXX_SLI_IQ_DOORBELL(iq_no);
 290         iq->inst_cnt_reg = oct->mmio[0].hw_addr
 291                            + CN6XXX_SLI_IQ_INSTR_COUNT(iq_no);
 292         dev_dbg(&oct->pci_dev->dev, "InstQ[%d]:dbell reg @ 0x%p instcnt_reg @ 0x%p\n",
 293                 iq_no, iq->doorbell_reg, iq->inst_cnt_reg);
 294
 295         /* Store the current instruction counter
 296          * (used in flush_iq calculation)
 297          */
 298         iq->reset_instr_cnt = readl(iq->inst_cnt_reg);
 299 }
 300
 301 static void lio_cn66xx_setup_iq_regs(struct octeon_device *oct, u32 iq_no)
 302 {
 303         lio_cn6xxx_setup_iq_regs(oct, iq_no);
 304
 305         /* Backpressure for this queue - WMARK set to all F's. This effectively
 306          * disables the backpressure mechanism.
 307          */
 308         octeon_write_csr64(oct, CN66XX_SLI_IQ_BP64(iq_no),
 309                            (0xFFFFFFFFULL << 32));
 310 }
 311
 312 void lio_cn6xxx_setup_oq_regs(struct octeon_device *oct, u32 oq_no)
 313 {
 314         u32 intr;
 315         struct octeon_droq *droq = oct->droq[oq_no];
 316
 317         octeon_write_csr64(oct, CN6XXX_SLI_OQ_BASE_ADDR64(oq_no),
 318                            droq->desc_ring_dma);
 319         octeon_write_csr(oct, CN6XXX_SLI_OQ_SIZE(oq_no), droq->max_count);
 320
 321         octeon_write_csr(oct, CN6XXX_SLI_OQ_BUFF_INFO_SIZE(oq_no),
 322                          (droq->buffer_size | (OCT_RH_SIZE << 16)));
 323
 324         /* Get the mapped address of the pkt_sent and pkts_credit regs */
 325         droq->pkts_sent_reg =
 326                 oct->mmio[0].hw_addr + CN6XXX_SLI_OQ_PKTS_SENT(oq_no);
 327         droq->pkts_credit_reg =
 328                 oct->mmio[0].hw_addr + CN6XXX_SLI_OQ_PKTS_CREDIT(oq_no);
 329
 330         /* Enable this output queue to generate Packet Timer Interrupt */
 331         intr = octeon_read_csr(oct, CN6XXX_SLI_PKT_TIME_INT_ENB);
 332         intr |= (1 << oq_no);
 333         octeon_write_csr(oct, CN6XXX_SLI_PKT_TIME_INT_ENB, intr);
 334
 335         /* Enable this output queue to generate Packet Timer Interrupt */
 336         intr = octeon_read_csr(oct, CN6XXX_SLI_PKT_CNT_INT_ENB);
 337         intr |= (1 << oq_no);
 338         octeon_write_csr(oct, CN6XXX_SLI_PKT_CNT_INT_ENB, intr);
 339 }
 340
 341 int lio_cn6xxx_enable_io_queues(struct octeon_device *oct)
 342 {
 343         u32 mask;
 344
 345         mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_INSTR_SIZE);
 346         mask |= oct->io_qmask.iq64B;
 347         octeon_write_csr(oct, CN6XXX_SLI_PKT_INSTR_SIZE, mask);
 348
 349         mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB);
 350         mask |= oct->io_qmask.iq;
 351         octeon_write_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB, mask);
 352
 353         mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_OUT_ENB);
 354         mask |= oct->io_qmask.oq;
 355         octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_ENB, mask);
 356
 357         return 0;
 358 }
 359
 360 void lio_cn6xxx_disable_io_queues(struct octeon_device *oct)
 361 {
 362         int i;
 363         u32 mask, loop = HZ;
 364         u32 d32;
 365
 366         /* Reset the Enable bits for Input Queues. */
 367         mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB);
 368         mask ^= oct->io_qmask.iq;
 369         octeon_write_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB, mask);
 370
 371         /* Wait until hardware indicates that the queues are out of reset. */
 372         mask = (u32)oct->io_qmask.iq;
 373         d32 = octeon_read_csr(oct, CN6XXX_SLI_PORT_IN_RST_IQ);
 374         while (((d32 & mask) != mask) && loop--) {
 375                 d32 = octeon_read_csr(oct, CN6XXX_SLI_PORT_IN_RST_IQ);
 376                 schedule_timeout_uninterruptible(1);
 377         }
 378
 379         /* Reset the doorbell register for each Input queue. */
 380         for (i = 0; i < MAX_OCTEON_INSTR_QUEUES(oct); i++) {
 381                 if (!(oct->io_qmask.iq & (1ULL << i)))
 382                         continue;
 383                 octeon_write_csr(oct, CN6XXX_SLI_IQ_DOORBELL(i), 0xFFFFFFFF);
 384                 d32 = octeon_read_csr(oct, CN6XXX_SLI_IQ_DOORBELL(i));
 385         }
 386
 387         /* Reset the Enable bits for Output Queues. */
 388         mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_OUT_ENB);
 389         mask ^= oct->io_qmask.oq;
 390         octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_ENB, mask);
 391
 392         /* Wait until hardware indicates that the queues are out of reset. */
 393         loop = HZ;
 394         mask = (u32)oct->io_qmask.oq;
 395         d32 = octeon_read_csr(oct, CN6XXX_SLI_PORT_IN_RST_OQ);
 396         while (((d32 & mask) != mask) && loop--) {
 397                 d32 = octeon_read_csr(oct, CN6XXX_SLI_PORT_IN_RST_OQ);
 398                 schedule_timeout_uninterruptible(1);
 399         }
 400         ;
 401
 402         /* Reset the doorbell register for each Output queue. */
 403         /* for (i = 0; i < oct->num_oqs; i++) { */
 404         for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES(oct); i++) {
 405                 if (!(oct->io_qmask.oq & (1ULL << i)))
 406                         continue;
 407                 octeon_write_csr(oct, CN6XXX_SLI_OQ_PKTS_CREDIT(i), 0xFFFFFFFF);
 408                 d32 = octeon_read_csr(oct, CN6XXX_SLI_OQ_PKTS_CREDIT(i));
 409
 410                 d32 = octeon_read_csr(oct, CN6XXX_SLI_OQ_PKTS_SENT(i));
 411                 octeon_write_csr(oct, CN6XXX_SLI_OQ_PKTS_SENT(i), d32);
 412         }
 413
 414         d32 = octeon_read_csr(oct, CN6XXX_SLI_PKT_CNT_INT);
 415         if (d32)
 416                 octeon_write_csr(oct, CN6XXX_SLI_PKT_CNT_INT, d32);
 417
 418         d32 = octeon_read_csr(oct, CN6XXX_SLI_PKT_TIME_INT);
 419         if (d32)
 420                 octeon_write_csr(oct, CN6XXX_SLI_PKT_TIME_INT, d32);
 421 }
 422
 423 void
 424 lio_cn6xxx_bar1_idx_setup(struct octeon_device *oct,
 425                           u64 core_addr,
 426                           u32 idx,
 427                           int valid)
 428 {
 429         u64 bar1;
 430
 431         if (valid == 0) {
 432                 bar1 = lio_pci_readq(oct, CN6XXX_BAR1_REG(idx, oct->pcie_port));
 433                 lio_pci_writeq(oct, (bar1 & 0xFFFFFFFEULL),
 434                                CN6XXX_BAR1_REG(idx, oct->pcie_port));
 435                 bar1 = lio_pci_readq(oct, CN6XXX_BAR1_REG(idx, oct->pcie_port));
 436                 return;
 437         }
 438
 439         /* Bits 17:4 of the PCI_BAR1_INDEXx stores bits 35:22 of
 440          * the Core Addr
 441          */
 442         lio_pci_writeq(oct, (((core_addr >> 22) << 4) | PCI_BAR1_MASK),
 443                        CN6XXX_BAR1_REG(idx, oct->pcie_port));
 444
 445         bar1 = lio_pci_readq(oct, CN6XXX_BAR1_REG(idx, oct->pcie_port));
 446 }
 447
 448 void lio_cn6xxx_bar1_idx_write(struct octeon_device *oct,
 449                                u32 idx,
 450                                u32 mask)
 451 {
 452         lio_pci_writeq(oct, mask, CN6XXX_BAR1_REG(idx, oct->pcie_port));
 453 }
 454
 455 u32 lio_cn6xxx_bar1_idx_read(struct octeon_device *oct, u32 idx)
 456 {
 457         return (u32)lio_pci_readq(oct, CN6XXX_BAR1_REG(idx, oct->pcie_port));
 458 }
 459
 460 u32
 461 lio_cn6xxx_update_read_index(struct octeon_instr_queue *iq)
 462 {
 463         u32 new_idx = readl(iq->inst_cnt_reg);
 464
 465         /* The new instr cnt reg is a 32-bit counter that can roll over. We have
 466          * noted the counter's initial value at init time into
 467          * reset_instr_cnt
 468          */
 469         if (iq->reset_instr_cnt < new_idx)
 470                 new_idx -= iq->reset_instr_cnt;
 471         else
 472                 new_idx += (0xffffffff - iq->reset_instr_cnt) + 1;
 473
 474         /* Modulo of the new index with the IQ size will give us
 475          * the new index.
 476          */
 477         new_idx %= iq->max_count;
 478
 479         return new_idx;
 480 }
 481
 482 void lio_cn6xxx_enable_interrupt(struct octeon_device *oct,
 483                                  u8 unused __attribute__((unused)))
 484 {
 485         struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
 486         u64 mask = cn6xxx->intr_mask64 | CN6XXX_INTR_DMA0_FORCE;
 487
 488         /* Enable Interrupt */
 489         writeq(mask, cn6xxx->intr_enb_reg64);
 490 }
 491
 492 void lio_cn6xxx_disable_interrupt(struct octeon_device *oct,
 493                                   u8 unused __attribute__((unused)))
 494 {
 495         struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
 496
 497         /* Disable Interrupts */
 498         writeq(0, cn6xxx->intr_enb_reg64);
 499
 500         /* make sure interrupts are really disabled */
 501         mmiowb();
 502 }
 503
 504 static void lio_cn6xxx_get_pcie_qlmport(struct octeon_device *oct)
 505 {
 506         /* CN63xx Pass2 and newer parts implements the SLI_MAC_NUMBER register
 507          * to determine the PCIE port #
 508          */
 509         oct->pcie_port = octeon_read_csr(oct, CN6XXX_SLI_MAC_NUMBER) & 0xff;
 510
 511         dev_dbg(&oct->pci_dev->dev, "Using PCIE Port %d\n", oct->pcie_port);
 512 }
 513
 514 static void
 515 lio_cn6xxx_process_pcie_error_intr(struct octeon_device *oct, u64 intr64)
 516 {
 517         dev_err(&oct->pci_dev->dev, "Error Intr: 0x%016llx\n",
 518                 CVM_CAST64(intr64));
 519 }
 520
 521 static int lio_cn6xxx_process_droq_intr_regs(struct octeon_device *oct)
 522 {
 523         struct octeon_droq *droq;
 524         int oq_no;
 525         u32 pkt_count, droq_time_mask, droq_mask, droq_int_enb;
 526         u32 droq_cnt_enb, droq_cnt_mask;
 527
 528         droq_cnt_enb = octeon_read_csr(oct, CN6XXX_SLI_PKT_CNT_INT_ENB);
 529         droq_cnt_mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_CNT_INT);
 530         droq_mask = droq_cnt_mask & droq_cnt_enb;
 531
 532         droq_time_mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_TIME_INT);
 533         droq_int_enb = octeon_read_csr(oct, CN6XXX_SLI_PKT_TIME_INT_ENB);
 534         droq_mask |= (droq_time_mask & droq_int_enb);
 535
 536         droq_mask &= oct->io_qmask.oq;
 537
 538         oct->droq_intr = 0;
 539
 540         /* for (oq_no = 0; oq_no < oct->num_oqs; oq_no++) { */
 541         for (oq_no = 0; oq_no < MAX_OCTEON_OUTPUT_QUEUES(oct); oq_no++) {
 542                 if (!(droq_mask & (1ULL << oq_no)))
 543                         continue;
 544
 545                 droq = oct->droq[oq_no];
 546                 pkt_count = octeon_droq_check_hw_for_pkts(droq);
 547                 if (pkt_count) {
 548                         oct->droq_intr |= (1ULL << oq_no);
 549                         if (droq->ops.poll_mode) {
 550                                 u32 value;
 551                                 u32 reg;
 552
 553                                 struct octeon_cn6xxx *cn6xxx =
 554                                         (struct octeon_cn6xxx *)oct->chip;
 555
 556                                 /* disable interrupts for this droq */
 557                                 spin_lock
 558                                         (&cn6xxx->lock_for_droq_int_enb_reg);
 559                                 reg = CN6XXX_SLI_PKT_TIME_INT_ENB;
 560                                 value = octeon_read_csr(oct, reg);
 561                                 value &= ~(1 << oq_no);
 562                                 octeon_write_csr(oct, reg, value);
 563                                 reg = CN6XXX_SLI_PKT_CNT_INT_ENB;
 564                                 value = octeon_read_csr(oct, reg);
 565                                 value &= ~(1 << oq_no);
 566                                 octeon_write_csr(oct, reg, value);
 567
 568                                 /* Ensure that the enable register is written.
 569                                  */
 570                                 mmiowb();
 571
 572                                 spin_unlock(&cn6xxx->lock_for_droq_int_enb_reg);
 573                         }
 574                 }
 575         }
 576
 577         droq_time_mask &= oct->io_qmask.oq;
 578         droq_cnt_mask &= oct->io_qmask.oq;
 579
 580         /* Reset the PKT_CNT/TIME_INT registers. */
 581         if (droq_time_mask)
 582                 octeon_write_csr(oct, CN6XXX_SLI_PKT_TIME_INT, droq_time_mask);
 583
 584         if (droq_cnt_mask)      /* reset PKT_CNT register:66xx */
 585                 octeon_write_csr(oct, CN6XXX_SLI_PKT_CNT_INT, droq_cnt_mask);
 586
 587         return 0;
 588 }
 589
 590 irqreturn_t lio_cn6xxx_process_interrupt_regs(void *dev)
 591 {
 592         struct octeon_device *oct = (struct octeon_device *)dev;
 593         struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
 594         u64 intr64;
 595
 596         intr64 = readq(cn6xxx->intr_sum_reg64);
 597
 598         /* If our device has interrupted, then proceed.
 599          * Also check for all f's if interrupt was triggered on an error
 600          * and the PCI read fails.
 601          */
 602         if (!intr64 || (intr64 == 0xFFFFFFFFFFFFFFFFULL))
 603                 return IRQ_NONE;
 604
 605         oct->int_status = 0;
 606
 607         if (intr64 & CN6XXX_INTR_ERR)
 608                 lio_cn6xxx_process_pcie_error_intr(oct, intr64);
 609
 610         if (intr64 & CN6XXX_INTR_PKT_DATA) {
 611                 lio_cn6xxx_process_droq_intr_regs(oct);
 612                 oct->int_status |= OCT_DEV_INTR_PKT_DATA;
 613         }
 614
 615         if (intr64 & CN6XXX_INTR_DMA0_FORCE)
 616                 oct->int_status |= OCT_DEV_INTR_DMA0_FORCE;
 617
 618         if (intr64 & CN6XXX_INTR_DMA1_FORCE)
 619                 oct->int_status |= OCT_DEV_INTR_DMA1_FORCE;
 620
 621         /* Clear the current interrupts */
 622         writeq(intr64, cn6xxx->intr_sum_reg64);
 623
 624         return IRQ_HANDLED;
 625 }
 626
 627 void lio_cn6xxx_setup_reg_address(struct octeon_device *oct,
 628                                   void *chip,
 629                                   struct octeon_reg_list *reg_list)
 630 {
 631         u8 __iomem *bar0_pciaddr = oct->mmio[0].hw_addr;
 632         struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)chip;
 633
 634         reg_list->pci_win_wr_addr_hi =
 635                 (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_WR_ADDR_HI);
 636         reg_list->pci_win_wr_addr_lo =
 637                 (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_WR_ADDR_LO);
 638         reg_list->pci_win_wr_addr =
 639                 (u64 __iomem *)(bar0_pciaddr + CN6XXX_WIN_WR_ADDR64);
 640
 641         reg_list->pci_win_rd_addr_hi =
 642                 (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_RD_ADDR_HI);
 643         reg_list->pci_win_rd_addr_lo =
 644                 (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_RD_ADDR_LO);
 645         reg_list->pci_win_rd_addr =
 646                 (u64 __iomem *)(bar0_pciaddr + CN6XXX_WIN_RD_ADDR64);
 647
 648         reg_list->pci_win_wr_data_hi =
 649                 (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_WR_DATA_HI);
 650         reg_list->pci_win_wr_data_lo =
 651                 (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_WR_DATA_LO);
 652         reg_list->pci_win_wr_data =
 653                 (u64 __iomem *)(bar0_pciaddr + CN6XXX_WIN_WR_DATA64);
 654
 655         reg_list->pci_win_rd_data_hi =
 656                 (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_RD_DATA_HI);
 657         reg_list->pci_win_rd_data_lo =
 658                 (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_RD_DATA_LO);
 659         reg_list->pci_win_rd_data =
 660                 (u64 __iomem *)(bar0_pciaddr + CN6XXX_WIN_RD_DATA64);
 661
 662         lio_cn6xxx_get_pcie_qlmport(oct);
 663
 664         cn6xxx->intr_sum_reg64 = bar0_pciaddr + CN6XXX_SLI_INT_SUM64;
 665         cn6xxx->intr_mask64 = CN6XXX_INTR_MASK;
 666         cn6xxx->intr_enb_reg64 =
 667                 bar0_pciaddr + CN6XXX_SLI_INT_ENB64(oct->pcie_port);
 668 }
 669
 670 int lio_setup_cn66xx_octeon_device(struct octeon_device *oct)
 671 {
 672         struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
 673
 674         if (octeon_map_pci_barx(oct, 0, 0))
 675                 return 1;
 676
 677         if (octeon_map_pci_barx(oct, 1, MAX_BAR1_IOREMAP_SIZE)) {
 678                 dev_err(&oct->pci_dev->dev, "%s CN66XX BAR1 map failed\n",
 679                         __func__);
 680                 octeon_unmap_pci_barx(oct, 0);
 681                 return 1;
 682         }
 683
 684         spin_lock_init(&cn6xxx->lock_for_droq_int_enb_reg);
 685
 686         oct->fn_list.setup_iq_regs = lio_cn66xx_setup_iq_regs;
 687         oct->fn_list.setup_oq_regs = lio_cn6xxx_setup_oq_regs;
 688
 689         oct->fn_list.soft_reset = lio_cn6xxx_soft_reset;
 690         oct->fn_list.setup_device_regs = lio_cn6xxx_setup_device_regs;
 691         oct->fn_list.update_iq_read_idx = lio_cn6xxx_update_read_index;
 692
 693         oct->fn_list.bar1_idx_setup = lio_cn6xxx_bar1_idx_setup;
 694         oct->fn_list.bar1_idx_write = lio_cn6xxx_bar1_idx_write;
 695         oct->fn_list.bar1_idx_read = lio_cn6xxx_bar1_idx_read;
 696
 697         oct->fn_list.process_interrupt_regs = lio_cn6xxx_process_interrupt_regs;
 698         oct->fn_list.enable_interrupt = lio_cn6xxx_enable_interrupt;
 699         oct->fn_list.disable_interrupt = lio_cn6xxx_disable_interrupt;
 700
 701         oct->fn_list.enable_io_queues = lio_cn6xxx_enable_io_queues;
 702         oct->fn_list.disable_io_queues = lio_cn6xxx_disable_io_queues;
 703
 704         lio_cn6xxx_setup_reg_address(oct, oct->chip, &oct->reg_list);
 705
 706         cn6xxx->conf = (struct octeon_config *)
 707                        oct_get_config_info(oct, LIO_210SV);
 708         if (!cn6xxx->conf) {
 709                 dev_err(&oct->pci_dev->dev, "%s No Config found for CN66XX\n",
 710                         __func__);
 711                 octeon_unmap_pci_barx(oct, 0);
 712                 octeon_unmap_pci_barx(oct, 1);
 713                 return 1;
 714         }
 715
 716         oct->coproc_clock_rate = 1000000ULL * lio_cn6xxx_coprocessor_clock(oct);
 717
 718         return 0;
 719 }
 720
 721 int lio_validate_cn6xxx_config_info(struct octeon_device *oct,
 722                                     struct octeon_config *conf6xxx)
 723 {
 724         /* int total_instrs = 0; */
 725
 726         if (CFG_GET_IQ_MAX_Q(conf6xxx) > CN6XXX_MAX_INPUT_QUEUES) {
 727                 dev_err(&oct->pci_dev->dev, "%s: Num IQ (%d) exceeds Max (%d)\n",
 728                         __func__, CFG_GET_IQ_MAX_Q(conf6xxx),
 729                         CN6XXX_MAX_INPUT_QUEUES);
 730                 return 1;
 731         }
 732
 733         if (CFG_GET_OQ_MAX_Q(conf6xxx) > CN6XXX_MAX_OUTPUT_QUEUES) {
 734                 dev_err(&oct->pci_dev->dev, "%s: Num OQ (%d) exceeds Max (%d)\n",
 735                         __func__, CFG_GET_OQ_MAX_Q(conf6xxx),
 736                         CN6XXX_MAX_OUTPUT_QUEUES);
 737                 return 1;
 738         }
 739
 740         if (CFG_GET_IQ_INSTR_TYPE(conf6xxx) != OCTEON_32BYTE_INSTR &&
 741             CFG_GET_IQ_INSTR_TYPE(conf6xxx) != OCTEON_64BYTE_INSTR) {
 742                 dev_err(&oct->pci_dev->dev, "%s: Invalid instr type for IQ\n",
 743                         __func__);
 744                 return 1;
 745         }
 746         if (!(CFG_GET_OQ_INFO_PTR(conf6xxx)) ||
 747             !(CFG_GET_OQ_REFILL_THRESHOLD(conf6xxx))) {
 748                 dev_err(&oct->pci_dev->dev, "%s: Invalid parameter for OQ\n",
 749                         __func__);
 750                 return 1;
 751         }
 752
 753         if (!(CFG_GET_OQ_INTR_TIME(conf6xxx))) {
 754                 dev_err(&oct->pci_dev->dev, "%s: No Time Interrupt for OQ\n",
 755                         __func__);
 756                 return 1;
 757         }
 758
 759         return 0;
 760 }