2 * Copyright (C) 2005 - 2015 Emulex
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License version 2
7 * as published by the Free Software Foundation. The full GNU General
8 * Public License is included in this distribution in the file called COPYING.
10 * Contact Information:
11 * linux-drivers@emulex.com
15 * Costa Mesa, CA 92626
18 #include <linux/prefetch.h>
19 #include <linux/module.h>
22 #include <asm/div64.h>
23 #include <linux/aer.h>
24 #include <linux/if_bridge.h>
25 #include <net/busy_poll.h>
26 #include <net/vxlan.h>
28 MODULE_VERSION(DRV_VER
);
29 MODULE_DESCRIPTION(DRV_DESC
" " DRV_VER
);
30 MODULE_AUTHOR("Emulex Corporation");
31 MODULE_LICENSE("GPL");
33 /* num_vfs module param is obsolete.
34 * Use sysfs method to enable/disable VFs.
36 static unsigned int num_vfs
;
37 module_param(num_vfs
, uint
, S_IRUGO
);
38 MODULE_PARM_DESC(num_vfs
, "Number of PCI VFs to initialize");
40 static ushort rx_frag_size
= 2048;
41 module_param(rx_frag_size
, ushort
, S_IRUGO
);
42 MODULE_PARM_DESC(rx_frag_size
, "Size of a fragment that holds rcvd data.");
44 static const struct pci_device_id be_dev_ids
[] = {
45 { PCI_DEVICE(BE_VENDOR_ID
, BE_DEVICE_ID1
) },
46 { PCI_DEVICE(BE_VENDOR_ID
, BE_DEVICE_ID2
) },
47 { PCI_DEVICE(BE_VENDOR_ID
, OC_DEVICE_ID1
) },
48 { PCI_DEVICE(BE_VENDOR_ID
, OC_DEVICE_ID2
) },
49 { PCI_DEVICE(EMULEX_VENDOR_ID
, OC_DEVICE_ID3
)},
50 { PCI_DEVICE(EMULEX_VENDOR_ID
, OC_DEVICE_ID4
)},
51 { PCI_DEVICE(EMULEX_VENDOR_ID
, OC_DEVICE_ID5
)},
52 { PCI_DEVICE(EMULEX_VENDOR_ID
, OC_DEVICE_ID6
)},
55 MODULE_DEVICE_TABLE(pci
, be_dev_ids
);
56 /* UE Status Low CSR */
57 static const char * const ue_status_low_desc
[] = {
92 /* UE Status High CSR */
93 static const char * const ue_status_hi_desc
[] = {
128 static void be_queue_free(struct be_adapter
*adapter
, struct be_queue_info
*q
)
130 struct be_dma_mem
*mem
= &q
->dma_mem
;
133 dma_free_coherent(&adapter
->pdev
->dev
, mem
->size
, mem
->va
,
139 static int be_queue_alloc(struct be_adapter
*adapter
, struct be_queue_info
*q
,
140 u16 len
, u16 entry_size
)
142 struct be_dma_mem
*mem
= &q
->dma_mem
;
144 memset(q
, 0, sizeof(*q
));
146 q
->entry_size
= entry_size
;
147 mem
->size
= len
* entry_size
;
148 mem
->va
= dma_zalloc_coherent(&adapter
->pdev
->dev
, mem
->size
, &mem
->dma
,
155 static void be_reg_intr_set(struct be_adapter
*adapter
, bool enable
)
159 pci_read_config_dword(adapter
->pdev
, PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET
,
161 enabled
= reg
& MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK
;
163 if (!enabled
&& enable
)
164 reg
|= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK
;
165 else if (enabled
&& !enable
)
166 reg
&= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK
;
170 pci_write_config_dword(adapter
->pdev
,
171 PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET
, reg
);
174 static void be_intr_set(struct be_adapter
*adapter
, bool enable
)
178 /* On lancer interrupts can't be controlled via this register */
179 if (lancer_chip(adapter
))
182 if (be_check_error(adapter
, BE_ERROR_EEH
))
185 status
= be_cmd_intr_set(adapter
, enable
);
187 be_reg_intr_set(adapter
, enable
);
190 static void be_rxq_notify(struct be_adapter
*adapter
, u16 qid
, u16 posted
)
194 if (be_check_error(adapter
, BE_ERROR_HW
))
197 val
|= qid
& DB_RQ_RING_ID_MASK
;
198 val
|= posted
<< DB_RQ_NUM_POSTED_SHIFT
;
201 iowrite32(val
, adapter
->db
+ DB_RQ_OFFSET
);
204 static void be_txq_notify(struct be_adapter
*adapter
, struct be_tx_obj
*txo
,
209 if (be_check_error(adapter
, BE_ERROR_HW
))
212 val
|= txo
->q
.id
& DB_TXULP_RING_ID_MASK
;
213 val
|= (posted
& DB_TXULP_NUM_POSTED_MASK
) << DB_TXULP_NUM_POSTED_SHIFT
;
216 iowrite32(val
, adapter
->db
+ txo
->db_offset
);
219 static void be_eq_notify(struct be_adapter
*adapter
, u16 qid
,
220 bool arm
, bool clear_int
, u16 num_popped
,
221 u32 eq_delay_mult_enc
)
225 val
|= qid
& DB_EQ_RING_ID_MASK
;
226 val
|= ((qid
& DB_EQ_RING_ID_EXT_MASK
) << DB_EQ_RING_ID_EXT_MASK_SHIFT
);
228 if (be_check_error(adapter
, BE_ERROR_HW
))
232 val
|= 1 << DB_EQ_REARM_SHIFT
;
234 val
|= 1 << DB_EQ_CLR_SHIFT
;
235 val
|= 1 << DB_EQ_EVNT_SHIFT
;
236 val
|= num_popped
<< DB_EQ_NUM_POPPED_SHIFT
;
237 val
|= eq_delay_mult_enc
<< DB_EQ_R2I_DLY_SHIFT
;
238 iowrite32(val
, adapter
->db
+ DB_EQ_OFFSET
);
241 void be_cq_notify(struct be_adapter
*adapter
, u16 qid
, bool arm
, u16 num_popped
)
245 val
|= qid
& DB_CQ_RING_ID_MASK
;
246 val
|= ((qid
& DB_CQ_RING_ID_EXT_MASK
) <<
247 DB_CQ_RING_ID_EXT_MASK_SHIFT
);
249 if (be_check_error(adapter
, BE_ERROR_HW
))
253 val
|= 1 << DB_CQ_REARM_SHIFT
;
254 val
|= num_popped
<< DB_CQ_NUM_POPPED_SHIFT
;
255 iowrite32(val
, adapter
->db
+ DB_CQ_OFFSET
);
258 static int be_mac_addr_set(struct net_device
*netdev
, void *p
)
260 struct be_adapter
*adapter
= netdev_priv(netdev
);
261 struct device
*dev
= &adapter
->pdev
->dev
;
262 struct sockaddr
*addr
= p
;
265 u32 old_pmac_id
= adapter
->pmac_id
[0], curr_pmac_id
= 0;
267 if (!is_valid_ether_addr(addr
->sa_data
))
268 return -EADDRNOTAVAIL
;
270 /* Proceed further only if, User provided MAC is different
273 if (ether_addr_equal(addr
->sa_data
, netdev
->dev_addr
))
276 /* if device is not running, copy MAC to netdev->dev_addr */
277 if (!netif_running(netdev
))
280 /* The PMAC_ADD cmd may fail if the VF doesn't have FILTMGMT
281 * privilege or if PF did not provision the new MAC address.
282 * On BE3, this cmd will always fail if the VF doesn't have the
283 * FILTMGMT privilege. This failure is OK, only if the PF programmed
284 * the MAC for the VF.
286 status
= be_cmd_pmac_add(adapter
, (u8
*)addr
->sa_data
,
287 adapter
->if_handle
, &adapter
->pmac_id
[0], 0);
289 curr_pmac_id
= adapter
->pmac_id
[0];
291 /* Delete the old programmed MAC. This call may fail if the
292 * old MAC was already deleted by the PF driver.
294 if (adapter
->pmac_id
[0] != old_pmac_id
)
295 be_cmd_pmac_del(adapter
, adapter
->if_handle
,
299 /* Decide if the new MAC is successfully activated only after
302 status
= be_cmd_get_active_mac(adapter
, curr_pmac_id
, mac
,
303 adapter
->if_handle
, true, 0);
307 /* The MAC change did not happen, either due to lack of privilege
308 * or PF didn't pre-provision.
310 if (!ether_addr_equal(addr
->sa_data
, mac
)) {
315 ether_addr_copy(netdev
->dev_addr
, addr
->sa_data
);
316 dev_info(dev
, "MAC address changed to %pM\n", addr
->sa_data
);
319 dev_warn(dev
, "MAC address change to %pM failed\n", addr
->sa_data
);
323 /* BE2 supports only v0 cmd */
324 static void *hw_stats_from_cmd(struct be_adapter
*adapter
)
326 if (BE2_chip(adapter
)) {
327 struct be_cmd_resp_get_stats_v0
*cmd
= adapter
->stats_cmd
.va
;
329 return &cmd
->hw_stats
;
330 } else if (BE3_chip(adapter
)) {
331 struct be_cmd_resp_get_stats_v1
*cmd
= adapter
->stats_cmd
.va
;
333 return &cmd
->hw_stats
;
335 struct be_cmd_resp_get_stats_v2
*cmd
= adapter
->stats_cmd
.va
;
337 return &cmd
->hw_stats
;
341 /* BE2 supports only v0 cmd */
342 static void *be_erx_stats_from_cmd(struct be_adapter
*adapter
)
344 if (BE2_chip(adapter
)) {
345 struct be_hw_stats_v0
*hw_stats
= hw_stats_from_cmd(adapter
);
347 return &hw_stats
->erx
;
348 } else if (BE3_chip(adapter
)) {
349 struct be_hw_stats_v1
*hw_stats
= hw_stats_from_cmd(adapter
);
351 return &hw_stats
->erx
;
353 struct be_hw_stats_v2
*hw_stats
= hw_stats_from_cmd(adapter
);
355 return &hw_stats
->erx
;
359 static void populate_be_v0_stats(struct be_adapter
*adapter
)
361 struct be_hw_stats_v0
*hw_stats
= hw_stats_from_cmd(adapter
);
362 struct be_pmem_stats
*pmem_sts
= &hw_stats
->pmem
;
363 struct be_rxf_stats_v0
*rxf_stats
= &hw_stats
->rxf
;
364 struct be_port_rxf_stats_v0
*port_stats
=
365 &rxf_stats
->port
[adapter
->port_num
];
366 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
368 be_dws_le_to_cpu(hw_stats
, sizeof(*hw_stats
));
369 drvs
->rx_pause_frames
= port_stats
->rx_pause_frames
;
370 drvs
->rx_crc_errors
= port_stats
->rx_crc_errors
;
371 drvs
->rx_control_frames
= port_stats
->rx_control_frames
;
372 drvs
->rx_in_range_errors
= port_stats
->rx_in_range_errors
;
373 drvs
->rx_frame_too_long
= port_stats
->rx_frame_too_long
;
374 drvs
->rx_dropped_runt
= port_stats
->rx_dropped_runt
;
375 drvs
->rx_ip_checksum_errs
= port_stats
->rx_ip_checksum_errs
;
376 drvs
->rx_tcp_checksum_errs
= port_stats
->rx_tcp_checksum_errs
;
377 drvs
->rx_udp_checksum_errs
= port_stats
->rx_udp_checksum_errs
;
378 drvs
->rxpp_fifo_overflow_drop
= port_stats
->rx_fifo_overflow
;
379 drvs
->rx_dropped_tcp_length
= port_stats
->rx_dropped_tcp_length
;
380 drvs
->rx_dropped_too_small
= port_stats
->rx_dropped_too_small
;
381 drvs
->rx_dropped_too_short
= port_stats
->rx_dropped_too_short
;
382 drvs
->rx_out_range_errors
= port_stats
->rx_out_range_errors
;
383 drvs
->rx_input_fifo_overflow_drop
= port_stats
->rx_input_fifo_overflow
;
384 drvs
->rx_dropped_header_too_small
=
385 port_stats
->rx_dropped_header_too_small
;
386 drvs
->rx_address_filtered
=
387 port_stats
->rx_address_filtered
+
388 port_stats
->rx_vlan_filtered
;
389 drvs
->rx_alignment_symbol_errors
=
390 port_stats
->rx_alignment_symbol_errors
;
392 drvs
->tx_pauseframes
= port_stats
->tx_pauseframes
;
393 drvs
->tx_controlframes
= port_stats
->tx_controlframes
;
395 if (adapter
->port_num
)
396 drvs
->jabber_events
= rxf_stats
->port1_jabber_events
;
398 drvs
->jabber_events
= rxf_stats
->port0_jabber_events
;
399 drvs
->rx_drops_no_pbuf
= rxf_stats
->rx_drops_no_pbuf
;
400 drvs
->rx_drops_no_erx_descr
= rxf_stats
->rx_drops_no_erx_descr
;
401 drvs
->forwarded_packets
= rxf_stats
->forwarded_packets
;
402 drvs
->rx_drops_mtu
= rxf_stats
->rx_drops_mtu
;
403 drvs
->rx_drops_no_tpre_descr
= rxf_stats
->rx_drops_no_tpre_descr
;
404 drvs
->rx_drops_too_many_frags
= rxf_stats
->rx_drops_too_many_frags
;
405 adapter
->drv_stats
.eth_red_drops
= pmem_sts
->eth_red_drops
;
408 static void populate_be_v1_stats(struct be_adapter
*adapter
)
410 struct be_hw_stats_v1
*hw_stats
= hw_stats_from_cmd(adapter
);
411 struct be_pmem_stats
*pmem_sts
= &hw_stats
->pmem
;
412 struct be_rxf_stats_v1
*rxf_stats
= &hw_stats
->rxf
;
413 struct be_port_rxf_stats_v1
*port_stats
=
414 &rxf_stats
->port
[adapter
->port_num
];
415 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
417 be_dws_le_to_cpu(hw_stats
, sizeof(*hw_stats
));
418 drvs
->pmem_fifo_overflow_drop
= port_stats
->pmem_fifo_overflow_drop
;
419 drvs
->rx_priority_pause_frames
= port_stats
->rx_priority_pause_frames
;
420 drvs
->rx_pause_frames
= port_stats
->rx_pause_frames
;
421 drvs
->rx_crc_errors
= port_stats
->rx_crc_errors
;
422 drvs
->rx_control_frames
= port_stats
->rx_control_frames
;
423 drvs
->rx_in_range_errors
= port_stats
->rx_in_range_errors
;
424 drvs
->rx_frame_too_long
= port_stats
->rx_frame_too_long
;
425 drvs
->rx_dropped_runt
= port_stats
->rx_dropped_runt
;
426 drvs
->rx_ip_checksum_errs
= port_stats
->rx_ip_checksum_errs
;
427 drvs
->rx_tcp_checksum_errs
= port_stats
->rx_tcp_checksum_errs
;
428 drvs
->rx_udp_checksum_errs
= port_stats
->rx_udp_checksum_errs
;
429 drvs
->rx_dropped_tcp_length
= port_stats
->rx_dropped_tcp_length
;
430 drvs
->rx_dropped_too_small
= port_stats
->rx_dropped_too_small
;
431 drvs
->rx_dropped_too_short
= port_stats
->rx_dropped_too_short
;
432 drvs
->rx_out_range_errors
= port_stats
->rx_out_range_errors
;
433 drvs
->rx_dropped_header_too_small
=
434 port_stats
->rx_dropped_header_too_small
;
435 drvs
->rx_input_fifo_overflow_drop
=
436 port_stats
->rx_input_fifo_overflow_drop
;
437 drvs
->rx_address_filtered
= port_stats
->rx_address_filtered
;
438 drvs
->rx_alignment_symbol_errors
=
439 port_stats
->rx_alignment_symbol_errors
;
440 drvs
->rxpp_fifo_overflow_drop
= port_stats
->rxpp_fifo_overflow_drop
;
441 drvs
->tx_pauseframes
= port_stats
->tx_pauseframes
;
442 drvs
->tx_controlframes
= port_stats
->tx_controlframes
;
443 drvs
->tx_priority_pauseframes
= port_stats
->tx_priority_pauseframes
;
444 drvs
->jabber_events
= port_stats
->jabber_events
;
445 drvs
->rx_drops_no_pbuf
= rxf_stats
->rx_drops_no_pbuf
;
446 drvs
->rx_drops_no_erx_descr
= rxf_stats
->rx_drops_no_erx_descr
;
447 drvs
->forwarded_packets
= rxf_stats
->forwarded_packets
;
448 drvs
->rx_drops_mtu
= rxf_stats
->rx_drops_mtu
;
449 drvs
->rx_drops_no_tpre_descr
= rxf_stats
->rx_drops_no_tpre_descr
;
450 drvs
->rx_drops_too_many_frags
= rxf_stats
->rx_drops_too_many_frags
;
451 adapter
->drv_stats
.eth_red_drops
= pmem_sts
->eth_red_drops
;
454 static void populate_be_v2_stats(struct be_adapter
*adapter
)
456 struct be_hw_stats_v2
*hw_stats
= hw_stats_from_cmd(adapter
);
457 struct be_pmem_stats
*pmem_sts
= &hw_stats
->pmem
;
458 struct be_rxf_stats_v2
*rxf_stats
= &hw_stats
->rxf
;
459 struct be_port_rxf_stats_v2
*port_stats
=
460 &rxf_stats
->port
[adapter
->port_num
];
461 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
463 be_dws_le_to_cpu(hw_stats
, sizeof(*hw_stats
));
464 drvs
->pmem_fifo_overflow_drop
= port_stats
->pmem_fifo_overflow_drop
;
465 drvs
->rx_priority_pause_frames
= port_stats
->rx_priority_pause_frames
;
466 drvs
->rx_pause_frames
= port_stats
->rx_pause_frames
;
467 drvs
->rx_crc_errors
= port_stats
->rx_crc_errors
;
468 drvs
->rx_control_frames
= port_stats
->rx_control_frames
;
469 drvs
->rx_in_range_errors
= port_stats
->rx_in_range_errors
;
470 drvs
->rx_frame_too_long
= port_stats
->rx_frame_too_long
;
471 drvs
->rx_dropped_runt
= port_stats
->rx_dropped_runt
;
472 drvs
->rx_ip_checksum_errs
= port_stats
->rx_ip_checksum_errs
;
473 drvs
->rx_tcp_checksum_errs
= port_stats
->rx_tcp_checksum_errs
;
474 drvs
->rx_udp_checksum_errs
= port_stats
->rx_udp_checksum_errs
;
475 drvs
->rx_dropped_tcp_length
= port_stats
->rx_dropped_tcp_length
;
476 drvs
->rx_dropped_too_small
= port_stats
->rx_dropped_too_small
;
477 drvs
->rx_dropped_too_short
= port_stats
->rx_dropped_too_short
;
478 drvs
->rx_out_range_errors
= port_stats
->rx_out_range_errors
;
479 drvs
->rx_dropped_header_too_small
=
480 port_stats
->rx_dropped_header_too_small
;
481 drvs
->rx_input_fifo_overflow_drop
=
482 port_stats
->rx_input_fifo_overflow_drop
;
483 drvs
->rx_address_filtered
= port_stats
->rx_address_filtered
;
484 drvs
->rx_alignment_symbol_errors
=
485 port_stats
->rx_alignment_symbol_errors
;
486 drvs
->rxpp_fifo_overflow_drop
= port_stats
->rxpp_fifo_overflow_drop
;
487 drvs
->tx_pauseframes
= port_stats
->tx_pauseframes
;
488 drvs
->tx_controlframes
= port_stats
->tx_controlframes
;
489 drvs
->tx_priority_pauseframes
= port_stats
->tx_priority_pauseframes
;
490 drvs
->jabber_events
= port_stats
->jabber_events
;
491 drvs
->rx_drops_no_pbuf
= rxf_stats
->rx_drops_no_pbuf
;
492 drvs
->rx_drops_no_erx_descr
= rxf_stats
->rx_drops_no_erx_descr
;
493 drvs
->forwarded_packets
= rxf_stats
->forwarded_packets
;
494 drvs
->rx_drops_mtu
= rxf_stats
->rx_drops_mtu
;
495 drvs
->rx_drops_no_tpre_descr
= rxf_stats
->rx_drops_no_tpre_descr
;
496 drvs
->rx_drops_too_many_frags
= rxf_stats
->rx_drops_too_many_frags
;
497 adapter
->drv_stats
.eth_red_drops
= pmem_sts
->eth_red_drops
;
498 if (be_roce_supported(adapter
)) {
499 drvs
->rx_roce_bytes_lsd
= port_stats
->roce_bytes_received_lsd
;
500 drvs
->rx_roce_bytes_msd
= port_stats
->roce_bytes_received_msd
;
501 drvs
->rx_roce_frames
= port_stats
->roce_frames_received
;
502 drvs
->roce_drops_crc
= port_stats
->roce_drops_crc
;
503 drvs
->roce_drops_payload_len
=
504 port_stats
->roce_drops_payload_len
;
508 static void populate_lancer_stats(struct be_adapter
*adapter
)
510 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
511 struct lancer_pport_stats
*pport_stats
= pport_stats_from_cmd(adapter
);
513 be_dws_le_to_cpu(pport_stats
, sizeof(*pport_stats
));
514 drvs
->rx_pause_frames
= pport_stats
->rx_pause_frames_lo
;
515 drvs
->rx_crc_errors
= pport_stats
->rx_crc_errors_lo
;
516 drvs
->rx_control_frames
= pport_stats
->rx_control_frames_lo
;
517 drvs
->rx_in_range_errors
= pport_stats
->rx_in_range_errors
;
518 drvs
->rx_frame_too_long
= pport_stats
->rx_frames_too_long_lo
;
519 drvs
->rx_dropped_runt
= pport_stats
->rx_dropped_runt
;
520 drvs
->rx_ip_checksum_errs
= pport_stats
->rx_ip_checksum_errors
;
521 drvs
->rx_tcp_checksum_errs
= pport_stats
->rx_tcp_checksum_errors
;
522 drvs
->rx_udp_checksum_errs
= pport_stats
->rx_udp_checksum_errors
;
523 drvs
->rx_dropped_tcp_length
=
524 pport_stats
->rx_dropped_invalid_tcp_length
;
525 drvs
->rx_dropped_too_small
= pport_stats
->rx_dropped_too_small
;
526 drvs
->rx_dropped_too_short
= pport_stats
->rx_dropped_too_short
;
527 drvs
->rx_out_range_errors
= pport_stats
->rx_out_of_range_errors
;
528 drvs
->rx_dropped_header_too_small
=
529 pport_stats
->rx_dropped_header_too_small
;
530 drvs
->rx_input_fifo_overflow_drop
= pport_stats
->rx_fifo_overflow
;
531 drvs
->rx_address_filtered
=
532 pport_stats
->rx_address_filtered
+
533 pport_stats
->rx_vlan_filtered
;
534 drvs
->rx_alignment_symbol_errors
= pport_stats
->rx_symbol_errors_lo
;
535 drvs
->rxpp_fifo_overflow_drop
= pport_stats
->rx_fifo_overflow
;
536 drvs
->tx_pauseframes
= pport_stats
->tx_pause_frames_lo
;
537 drvs
->tx_controlframes
= pport_stats
->tx_control_frames_lo
;
538 drvs
->jabber_events
= pport_stats
->rx_jabbers
;
539 drvs
->forwarded_packets
= pport_stats
->num_forwards_lo
;
540 drvs
->rx_drops_mtu
= pport_stats
->rx_drops_mtu_lo
;
541 drvs
->rx_drops_too_many_frags
=
542 pport_stats
->rx_drops_too_many_frags_lo
;
545 static void accumulate_16bit_val(u32
*acc
, u16 val
)
547 #define lo(x) (x & 0xFFFF)
548 #define hi(x) (x & 0xFFFF0000)
549 bool wrapped
= val
< lo(*acc
);
550 u32 newacc
= hi(*acc
) + val
;
554 ACCESS_ONCE(*acc
) = newacc
;
557 static void populate_erx_stats(struct be_adapter
*adapter
,
558 struct be_rx_obj
*rxo
, u32 erx_stat
)
560 if (!BEx_chip(adapter
))
561 rx_stats(rxo
)->rx_drops_no_frags
= erx_stat
;
563 /* below erx HW counter can actually wrap around after
564 * 65535. Driver accumulates a 32-bit value
566 accumulate_16bit_val(&rx_stats(rxo
)->rx_drops_no_frags
,
570 void be_parse_stats(struct be_adapter
*adapter
)
572 struct be_erx_stats_v2
*erx
= be_erx_stats_from_cmd(adapter
);
573 struct be_rx_obj
*rxo
;
577 if (lancer_chip(adapter
)) {
578 populate_lancer_stats(adapter
);
580 if (BE2_chip(adapter
))
581 populate_be_v0_stats(adapter
);
582 else if (BE3_chip(adapter
))
584 populate_be_v1_stats(adapter
);
586 populate_be_v2_stats(adapter
);
588 /* erx_v2 is longer than v0, v1. use v2 for v0, v1 access */
589 for_all_rx_queues(adapter
, rxo
, i
) {
590 erx_stat
= erx
->rx_drops_no_fragments
[rxo
->q
.id
];
591 populate_erx_stats(adapter
, rxo
, erx_stat
);
596 static struct rtnl_link_stats64
*be_get_stats64(struct net_device
*netdev
,
597 struct rtnl_link_stats64
*stats
)
599 struct be_adapter
*adapter
= netdev_priv(netdev
);
600 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
601 struct be_rx_obj
*rxo
;
602 struct be_tx_obj
*txo
;
607 for_all_rx_queues(adapter
, rxo
, i
) {
608 const struct be_rx_stats
*rx_stats
= rx_stats(rxo
);
611 start
= u64_stats_fetch_begin_irq(&rx_stats
->sync
);
612 pkts
= rx_stats(rxo
)->rx_pkts
;
613 bytes
= rx_stats(rxo
)->rx_bytes
;
614 } while (u64_stats_fetch_retry_irq(&rx_stats
->sync
, start
));
615 stats
->rx_packets
+= pkts
;
616 stats
->rx_bytes
+= bytes
;
617 stats
->multicast
+= rx_stats(rxo
)->rx_mcast_pkts
;
618 stats
->rx_dropped
+= rx_stats(rxo
)->rx_drops_no_skbs
+
619 rx_stats(rxo
)->rx_drops_no_frags
;
622 for_all_tx_queues(adapter
, txo
, i
) {
623 const struct be_tx_stats
*tx_stats
= tx_stats(txo
);
626 start
= u64_stats_fetch_begin_irq(&tx_stats
->sync
);
627 pkts
= tx_stats(txo
)->tx_pkts
;
628 bytes
= tx_stats(txo
)->tx_bytes
;
629 } while (u64_stats_fetch_retry_irq(&tx_stats
->sync
, start
));
630 stats
->tx_packets
+= pkts
;
631 stats
->tx_bytes
+= bytes
;
634 /* bad pkts received */
635 stats
->rx_errors
= drvs
->rx_crc_errors
+
636 drvs
->rx_alignment_symbol_errors
+
637 drvs
->rx_in_range_errors
+
638 drvs
->rx_out_range_errors
+
639 drvs
->rx_frame_too_long
+
640 drvs
->rx_dropped_too_small
+
641 drvs
->rx_dropped_too_short
+
642 drvs
->rx_dropped_header_too_small
+
643 drvs
->rx_dropped_tcp_length
+
644 drvs
->rx_dropped_runt
;
646 /* detailed rx errors */
647 stats
->rx_length_errors
= drvs
->rx_in_range_errors
+
648 drvs
->rx_out_range_errors
+
649 drvs
->rx_frame_too_long
;
651 stats
->rx_crc_errors
= drvs
->rx_crc_errors
;
653 /* frame alignment errors */
654 stats
->rx_frame_errors
= drvs
->rx_alignment_symbol_errors
;
656 /* receiver fifo overrun */
657 /* drops_no_pbuf is no per i/f, it's per BE card */
658 stats
->rx_fifo_errors
= drvs
->rxpp_fifo_overflow_drop
+
659 drvs
->rx_input_fifo_overflow_drop
+
660 drvs
->rx_drops_no_pbuf
;
664 void be_link_status_update(struct be_adapter
*adapter
, u8 link_status
)
666 struct net_device
*netdev
= adapter
->netdev
;
668 if (!(adapter
->flags
& BE_FLAGS_LINK_STATUS_INIT
)) {
669 netif_carrier_off(netdev
);
670 adapter
->flags
|= BE_FLAGS_LINK_STATUS_INIT
;
674 netif_carrier_on(netdev
);
676 netif_carrier_off(netdev
);
678 netdev_info(netdev
, "Link is %s\n", link_status
? "Up" : "Down");
681 static void be_tx_stats_update(struct be_tx_obj
*txo
, struct sk_buff
*skb
)
683 struct be_tx_stats
*stats
= tx_stats(txo
);
684 u64 tx_pkts
= skb_shinfo(skb
)->gso_segs
? : 1;
686 u64_stats_update_begin(&stats
->sync
);
688 stats
->tx_bytes
+= skb
->len
;
689 stats
->tx_pkts
+= tx_pkts
;
690 if (skb
->encapsulation
&& skb
->ip_summed
== CHECKSUM_PARTIAL
)
691 stats
->tx_vxlan_offload_pkts
+= tx_pkts
;
692 u64_stats_update_end(&stats
->sync
);
695 /* Returns number of WRBs needed for the skb */
696 static u32
skb_wrb_cnt(struct sk_buff
*skb
)
698 /* +1 for the header wrb */
699 return 1 + (skb_headlen(skb
) ? 1 : 0) + skb_shinfo(skb
)->nr_frags
;
702 static inline void wrb_fill(struct be_eth_wrb
*wrb
, u64 addr
, int len
)
704 wrb
->frag_pa_hi
= cpu_to_le32(upper_32_bits(addr
));
705 wrb
->frag_pa_lo
= cpu_to_le32(lower_32_bits(addr
));
706 wrb
->frag_len
= cpu_to_le32(len
& ETH_WRB_FRAG_LEN_MASK
);
710 /* A dummy wrb is just all zeros. Using a separate routine for dummy-wrb
711 * to avoid the swap and shift/mask operations in wrb_fill().
713 static inline void wrb_fill_dummy(struct be_eth_wrb
*wrb
)
721 static inline u16
be_get_tx_vlan_tag(struct be_adapter
*adapter
,
727 vlan_tag
= skb_vlan_tag_get(skb
);
728 vlan_prio
= (vlan_tag
& VLAN_PRIO_MASK
) >> VLAN_PRIO_SHIFT
;
729 /* If vlan priority provided by OS is NOT in available bmap */
730 if (!(adapter
->vlan_prio_bmap
& (1 << vlan_prio
)))
731 vlan_tag
= (vlan_tag
& ~VLAN_PRIO_MASK
) |
732 adapter
->recommended_prio_bits
;
737 /* Used only for IP tunnel packets */
738 static u16
skb_inner_ip_proto(struct sk_buff
*skb
)
740 return (inner_ip_hdr(skb
)->version
== 4) ?
741 inner_ip_hdr(skb
)->protocol
: inner_ipv6_hdr(skb
)->nexthdr
;
744 static u16
skb_ip_proto(struct sk_buff
*skb
)
746 return (ip_hdr(skb
)->version
== 4) ?
747 ip_hdr(skb
)->protocol
: ipv6_hdr(skb
)->nexthdr
;
750 static inline bool be_is_txq_full(struct be_tx_obj
*txo
)
752 return atomic_read(&txo
->q
.used
) + BE_MAX_TX_FRAG_COUNT
>= txo
->q
.len
;
755 static inline bool be_can_txq_wake(struct be_tx_obj
*txo
)
757 return atomic_read(&txo
->q
.used
) < txo
->q
.len
/ 2;
760 static inline bool be_is_tx_compl_pending(struct be_tx_obj
*txo
)
762 return atomic_read(&txo
->q
.used
) > txo
->pend_wrb_cnt
;
765 static void be_get_wrb_params_from_skb(struct be_adapter
*adapter
,
767 struct be_wrb_params
*wrb_params
)
771 if (skb_is_gso(skb
)) {
772 BE_WRB_F_SET(wrb_params
->features
, LSO
, 1);
773 wrb_params
->lso_mss
= skb_shinfo(skb
)->gso_size
;
774 if (skb_is_gso_v6(skb
) && !lancer_chip(adapter
))
775 BE_WRB_F_SET(wrb_params
->features
, LSO6
, 1);
776 } else if (skb
->ip_summed
== CHECKSUM_PARTIAL
) {
777 if (skb
->encapsulation
) {
778 BE_WRB_F_SET(wrb_params
->features
, IPCS
, 1);
779 proto
= skb_inner_ip_proto(skb
);
781 proto
= skb_ip_proto(skb
);
783 if (proto
== IPPROTO_TCP
)
784 BE_WRB_F_SET(wrb_params
->features
, TCPCS
, 1);
785 else if (proto
== IPPROTO_UDP
)
786 BE_WRB_F_SET(wrb_params
->features
, UDPCS
, 1);
789 if (skb_vlan_tag_present(skb
)) {
790 BE_WRB_F_SET(wrb_params
->features
, VLAN
, 1);
791 wrb_params
->vlan_tag
= be_get_tx_vlan_tag(adapter
, skb
);
794 BE_WRB_F_SET(wrb_params
->features
, CRC
, 1);
797 static void wrb_fill_hdr(struct be_adapter
*adapter
,
798 struct be_eth_hdr_wrb
*hdr
,
799 struct be_wrb_params
*wrb_params
,
802 memset(hdr
, 0, sizeof(*hdr
));
804 SET_TX_WRB_HDR_BITS(crc
, hdr
,
805 BE_WRB_F_GET(wrb_params
->features
, CRC
));
806 SET_TX_WRB_HDR_BITS(ipcs
, hdr
,
807 BE_WRB_F_GET(wrb_params
->features
, IPCS
));
808 SET_TX_WRB_HDR_BITS(tcpcs
, hdr
,
809 BE_WRB_F_GET(wrb_params
->features
, TCPCS
));
810 SET_TX_WRB_HDR_BITS(udpcs
, hdr
,
811 BE_WRB_F_GET(wrb_params
->features
, UDPCS
));
813 SET_TX_WRB_HDR_BITS(lso
, hdr
,
814 BE_WRB_F_GET(wrb_params
->features
, LSO
));
815 SET_TX_WRB_HDR_BITS(lso6
, hdr
,
816 BE_WRB_F_GET(wrb_params
->features
, LSO6
));
817 SET_TX_WRB_HDR_BITS(lso_mss
, hdr
, wrb_params
->lso_mss
);
819 /* Hack to skip HW VLAN tagging needs evt = 1, compl = 0. When this
820 * hack is not needed, the evt bit is set while ringing DB.
822 SET_TX_WRB_HDR_BITS(event
, hdr
,
823 BE_WRB_F_GET(wrb_params
->features
, VLAN_SKIP_HW
));
824 SET_TX_WRB_HDR_BITS(vlan
, hdr
,
825 BE_WRB_F_GET(wrb_params
->features
, VLAN
));
826 SET_TX_WRB_HDR_BITS(vlan_tag
, hdr
, wrb_params
->vlan_tag
);
828 SET_TX_WRB_HDR_BITS(num_wrb
, hdr
, skb_wrb_cnt(skb
));
829 SET_TX_WRB_HDR_BITS(len
, hdr
, skb
->len
);
830 SET_TX_WRB_HDR_BITS(mgmt
, hdr
,
831 BE_WRB_F_GET(wrb_params
->features
, OS2BMC
));
834 static void unmap_tx_frag(struct device
*dev
, struct be_eth_wrb
*wrb
,
838 u32 frag_len
= le32_to_cpu(wrb
->frag_len
);
841 dma
= (u64
)le32_to_cpu(wrb
->frag_pa_hi
) << 32 |
842 (u64
)le32_to_cpu(wrb
->frag_pa_lo
);
845 dma_unmap_single(dev
, dma
, frag_len
, DMA_TO_DEVICE
);
847 dma_unmap_page(dev
, dma
, frag_len
, DMA_TO_DEVICE
);
851 /* Grab a WRB header for xmit */
852 static u16
be_tx_get_wrb_hdr(struct be_tx_obj
*txo
)
854 u16 head
= txo
->q
.head
;
856 queue_head_inc(&txo
->q
);
860 /* Set up the WRB header for xmit */
861 static void be_tx_setup_wrb_hdr(struct be_adapter
*adapter
,
862 struct be_tx_obj
*txo
,
863 struct be_wrb_params
*wrb_params
,
864 struct sk_buff
*skb
, u16 head
)
866 u32 num_frags
= skb_wrb_cnt(skb
);
867 struct be_queue_info
*txq
= &txo
->q
;
868 struct be_eth_hdr_wrb
*hdr
= queue_index_node(txq
, head
);
870 wrb_fill_hdr(adapter
, hdr
, wrb_params
, skb
);
871 be_dws_cpu_to_le(hdr
, sizeof(*hdr
));
873 BUG_ON(txo
->sent_skb_list
[head
]);
874 txo
->sent_skb_list
[head
] = skb
;
875 txo
->last_req_hdr
= head
;
876 atomic_add(num_frags
, &txq
->used
);
877 txo
->last_req_wrb_cnt
= num_frags
;
878 txo
->pend_wrb_cnt
+= num_frags
;
881 /* Setup a WRB fragment (buffer descriptor) for xmit */
882 static void be_tx_setup_wrb_frag(struct be_tx_obj
*txo
, dma_addr_t busaddr
,
885 struct be_eth_wrb
*wrb
;
886 struct be_queue_info
*txq
= &txo
->q
;
888 wrb
= queue_head_node(txq
);
889 wrb_fill(wrb
, busaddr
, len
);
893 /* Bring the queue back to the state it was in before be_xmit_enqueue() routine
894 * was invoked. The producer index is restored to the previous packet and the
895 * WRBs of the current packet are unmapped. Invoked to handle tx setup errors.
897 static void be_xmit_restore(struct be_adapter
*adapter
,
898 struct be_tx_obj
*txo
, u16 head
, bool map_single
,
902 struct be_eth_wrb
*wrb
;
903 struct be_queue_info
*txq
= &txo
->q
;
905 dev
= &adapter
->pdev
->dev
;
908 /* skip the first wrb (hdr); it's not mapped */
911 wrb
= queue_head_node(txq
);
912 unmap_tx_frag(dev
, wrb
, map_single
);
914 copied
-= le32_to_cpu(wrb
->frag_len
);
921 /* Enqueue the given packet for transmit. This routine allocates WRBs for the
922 * packet, dma maps the packet buffers and sets up the WRBs. Returns the number
923 * of WRBs used up by the packet.
925 static u32
be_xmit_enqueue(struct be_adapter
*adapter
, struct be_tx_obj
*txo
,
927 struct be_wrb_params
*wrb_params
)
929 u32 i
, copied
= 0, wrb_cnt
= skb_wrb_cnt(skb
);
930 struct device
*dev
= &adapter
->pdev
->dev
;
931 struct be_queue_info
*txq
= &txo
->q
;
932 bool map_single
= false;
933 u16 head
= txq
->head
;
937 head
= be_tx_get_wrb_hdr(txo
);
939 if (skb
->len
> skb
->data_len
) {
940 len
= skb_headlen(skb
);
942 busaddr
= dma_map_single(dev
, skb
->data
, len
, DMA_TO_DEVICE
);
943 if (dma_mapping_error(dev
, busaddr
))
946 be_tx_setup_wrb_frag(txo
, busaddr
, len
);
950 for (i
= 0; i
< skb_shinfo(skb
)->nr_frags
; i
++) {
951 const struct skb_frag_struct
*frag
= &skb_shinfo(skb
)->frags
[i
];
952 len
= skb_frag_size(frag
);
954 busaddr
= skb_frag_dma_map(dev
, frag
, 0, len
, DMA_TO_DEVICE
);
955 if (dma_mapping_error(dev
, busaddr
))
957 be_tx_setup_wrb_frag(txo
, busaddr
, len
);
961 be_tx_setup_wrb_hdr(adapter
, txo
, wrb_params
, skb
, head
);
963 be_tx_stats_update(txo
, skb
);
967 adapter
->drv_stats
.dma_map_errors
++;
968 be_xmit_restore(adapter
, txo
, head
, map_single
, copied
);
972 static inline int qnq_async_evt_rcvd(struct be_adapter
*adapter
)
974 return adapter
->flags
& BE_FLAGS_QNQ_ASYNC_EVT_RCVD
;
977 static struct sk_buff
*be_insert_vlan_in_pkt(struct be_adapter
*adapter
,
984 skb
= skb_share_check(skb
, GFP_ATOMIC
);
988 if (skb_vlan_tag_present(skb
))
989 vlan_tag
= be_get_tx_vlan_tag(adapter
, skb
);
991 if (qnq_async_evt_rcvd(adapter
) && adapter
->pvid
) {
993 vlan_tag
= adapter
->pvid
;
994 /* f/w workaround to set skip_hw_vlan = 1, informs the F/W to
995 * skip VLAN insertion
997 BE_WRB_F_SET(wrb_params
->features
, VLAN_SKIP_HW
, 1);
1001 skb
= vlan_insert_tag_set_proto(skb
, htons(ETH_P_8021Q
),
1008 /* Insert the outer VLAN, if any */
1009 if (adapter
->qnq_vid
) {
1010 vlan_tag
= adapter
->qnq_vid
;
1011 skb
= vlan_insert_tag_set_proto(skb
, htons(ETH_P_8021Q
),
1015 BE_WRB_F_SET(wrb_params
->features
, VLAN_SKIP_HW
, 1);
1021 static bool be_ipv6_exthdr_check(struct sk_buff
*skb
)
1023 struct ethhdr
*eh
= (struct ethhdr
*)skb
->data
;
1024 u16 offset
= ETH_HLEN
;
1026 if (eh
->h_proto
== htons(ETH_P_IPV6
)) {
1027 struct ipv6hdr
*ip6h
= (struct ipv6hdr
*)(skb
->data
+ offset
);
1029 offset
+= sizeof(struct ipv6hdr
);
1030 if (ip6h
->nexthdr
!= NEXTHDR_TCP
&&
1031 ip6h
->nexthdr
!= NEXTHDR_UDP
) {
1032 struct ipv6_opt_hdr
*ehdr
=
1033 (struct ipv6_opt_hdr
*)(skb
->data
+ offset
);
1035 /* offending pkt: 2nd byte following IPv6 hdr is 0xff */
1036 if (ehdr
->hdrlen
== 0xff)
1043 static int be_vlan_tag_tx_chk(struct be_adapter
*adapter
, struct sk_buff
*skb
)
1045 return skb_vlan_tag_present(skb
) || adapter
->pvid
|| adapter
->qnq_vid
;
1048 static int be_ipv6_tx_stall_chk(struct be_adapter
*adapter
, struct sk_buff
*skb
)
1050 return BE3_chip(adapter
) && be_ipv6_exthdr_check(skb
);
1053 static struct sk_buff
*be_lancer_xmit_workarounds(struct be_adapter
*adapter
,
1054 struct sk_buff
*skb
,
1055 struct be_wrb_params
1058 struct vlan_ethhdr
*veh
= (struct vlan_ethhdr
*)skb
->data
;
1059 unsigned int eth_hdr_len
;
1062 /* For padded packets, BE HW modifies tot_len field in IP header
1063 * incorrecly when VLAN tag is inserted by HW.
1064 * For padded packets, Lancer computes incorrect checksum.
1066 eth_hdr_len
= ntohs(skb
->protocol
) == ETH_P_8021Q
?
1067 VLAN_ETH_HLEN
: ETH_HLEN
;
1068 if (skb
->len
<= 60 &&
1069 (lancer_chip(adapter
) || skb_vlan_tag_present(skb
)) &&
1071 ip
= (struct iphdr
*)ip_hdr(skb
);
1072 pskb_trim(skb
, eth_hdr_len
+ ntohs(ip
->tot_len
));
1075 /* If vlan tag is already inlined in the packet, skip HW VLAN
1076 * tagging in pvid-tagging mode
1078 if (be_pvid_tagging_enabled(adapter
) &&
1079 veh
->h_vlan_proto
== htons(ETH_P_8021Q
))
1080 BE_WRB_F_SET(wrb_params
->features
, VLAN_SKIP_HW
, 1);
1082 /* HW has a bug wherein it will calculate CSUM for VLAN
1083 * pkts even though it is disabled.
1084 * Manually insert VLAN in pkt.
1086 if (skb
->ip_summed
!= CHECKSUM_PARTIAL
&&
1087 skb_vlan_tag_present(skb
)) {
1088 skb
= be_insert_vlan_in_pkt(adapter
, skb
, wrb_params
);
1093 /* HW may lockup when VLAN HW tagging is requested on
1094 * certain ipv6 packets. Drop such pkts if the HW workaround to
1095 * skip HW tagging is not enabled by FW.
1097 if (unlikely(be_ipv6_tx_stall_chk(adapter
, skb
) &&
1098 (adapter
->pvid
|| adapter
->qnq_vid
) &&
1099 !qnq_async_evt_rcvd(adapter
)))
1102 /* Manual VLAN tag insertion to prevent:
1103 * ASIC lockup when the ASIC inserts VLAN tag into
1104 * certain ipv6 packets. Insert VLAN tags in driver,
1105 * and set event, completion, vlan bits accordingly
1108 if (be_ipv6_tx_stall_chk(adapter
, skb
) &&
1109 be_vlan_tag_tx_chk(adapter
, skb
)) {
1110 skb
= be_insert_vlan_in_pkt(adapter
, skb
, wrb_params
);
1117 dev_kfree_skb_any(skb
);
1122 static struct sk_buff
*be_xmit_workarounds(struct be_adapter
*adapter
,
1123 struct sk_buff
*skb
,
1124 struct be_wrb_params
*wrb_params
)
1126 /* Lancer, SH and BE3 in SRIOV mode have a bug wherein
1127 * packets that are 32b or less may cause a transmit stall
1128 * on that port. The workaround is to pad such packets
1129 * (len <= 32 bytes) to a minimum length of 36b.
1131 if (skb
->len
<= 32) {
1132 if (skb_put_padto(skb
, 36))
1136 if (BEx_chip(adapter
) || lancer_chip(adapter
)) {
1137 skb
= be_lancer_xmit_workarounds(adapter
, skb
, wrb_params
);
1145 static void be_xmit_flush(struct be_adapter
*adapter
, struct be_tx_obj
*txo
)
1147 struct be_queue_info
*txq
= &txo
->q
;
1148 struct be_eth_hdr_wrb
*hdr
= queue_index_node(txq
, txo
->last_req_hdr
);
1150 /* Mark the last request eventable if it hasn't been marked already */
1151 if (!(hdr
->dw
[2] & cpu_to_le32(TX_HDR_WRB_EVT
)))
1152 hdr
->dw
[2] |= cpu_to_le32(TX_HDR_WRB_EVT
| TX_HDR_WRB_COMPL
);
1154 /* compose a dummy wrb if there are odd set of wrbs to notify */
1155 if (!lancer_chip(adapter
) && (txo
->pend_wrb_cnt
& 1)) {
1156 wrb_fill_dummy(queue_head_node(txq
));
1157 queue_head_inc(txq
);
1158 atomic_inc(&txq
->used
);
1159 txo
->pend_wrb_cnt
++;
1160 hdr
->dw
[2] &= ~cpu_to_le32(TX_HDR_WRB_NUM_MASK
<<
1161 TX_HDR_WRB_NUM_SHIFT
);
1162 hdr
->dw
[2] |= cpu_to_le32((txo
->last_req_wrb_cnt
+ 1) <<
1163 TX_HDR_WRB_NUM_SHIFT
);
1165 be_txq_notify(adapter
, txo
, txo
->pend_wrb_cnt
);
1166 txo
->pend_wrb_cnt
= 0;
1169 /* OS2BMC related */
1171 #define DHCP_CLIENT_PORT 68
1172 #define DHCP_SERVER_PORT 67
1173 #define NET_BIOS_PORT1 137
1174 #define NET_BIOS_PORT2 138
1175 #define DHCPV6_RAS_PORT 547
1177 #define is_mc_allowed_on_bmc(adapter, eh) \
1178 (!is_multicast_filt_enabled(adapter) && \
1179 is_multicast_ether_addr(eh->h_dest) && \
1180 !is_broadcast_ether_addr(eh->h_dest))
1182 #define is_bc_allowed_on_bmc(adapter, eh) \
1183 (!is_broadcast_filt_enabled(adapter) && \
1184 is_broadcast_ether_addr(eh->h_dest))
1186 #define is_arp_allowed_on_bmc(adapter, skb) \
1187 (is_arp(skb) && is_arp_filt_enabled(adapter))
1189 #define is_broadcast_packet(eh, adapter) \
1190 (is_multicast_ether_addr(eh->h_dest) && \
1191 !compare_ether_addr(eh->h_dest, adapter->netdev->broadcast))
1193 #define is_arp(skb) (skb->protocol == htons(ETH_P_ARP))
1195 #define is_arp_filt_enabled(adapter) \
1196 (adapter->bmc_filt_mask & (BMC_FILT_BROADCAST_ARP))
1198 #define is_dhcp_client_filt_enabled(adapter) \
1199 (adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_CLIENT)
1201 #define is_dhcp_srvr_filt_enabled(adapter) \
1202 (adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_SERVER)
1204 #define is_nbios_filt_enabled(adapter) \
1205 (adapter->bmc_filt_mask & BMC_FILT_BROADCAST_NET_BIOS)
1207 #define is_ipv6_na_filt_enabled(adapter) \
1208 (adapter->bmc_filt_mask & \
1209 BMC_FILT_MULTICAST_IPV6_NEIGH_ADVER)
1211 #define is_ipv6_ra_filt_enabled(adapter) \
1212 (adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RA)
1214 #define is_ipv6_ras_filt_enabled(adapter) \
1215 (adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RAS)
1217 #define is_broadcast_filt_enabled(adapter) \
1218 (adapter->bmc_filt_mask & BMC_FILT_BROADCAST)
1220 #define is_multicast_filt_enabled(adapter) \
1221 (adapter->bmc_filt_mask & BMC_FILT_MULTICAST)
1223 static bool be_send_pkt_to_bmc(struct be_adapter
*adapter
,
1224 struct sk_buff
**skb
)
1226 struct ethhdr
*eh
= (struct ethhdr
*)(*skb
)->data
;
1227 bool os2bmc
= false;
1229 if (!be_is_os2bmc_enabled(adapter
))
1232 if (!is_multicast_ether_addr(eh
->h_dest
))
1235 if (is_mc_allowed_on_bmc(adapter
, eh
) ||
1236 is_bc_allowed_on_bmc(adapter
, eh
) ||
1237 is_arp_allowed_on_bmc(adapter
, (*skb
))) {
1242 if ((*skb
)->protocol
== htons(ETH_P_IPV6
)) {
1243 struct ipv6hdr
*hdr
= ipv6_hdr((*skb
));
1244 u8 nexthdr
= hdr
->nexthdr
;
1246 if (nexthdr
== IPPROTO_ICMPV6
) {
1247 struct icmp6hdr
*icmp6
= icmp6_hdr((*skb
));
1249 switch (icmp6
->icmp6_type
) {
1250 case NDISC_ROUTER_ADVERTISEMENT
:
1251 os2bmc
= is_ipv6_ra_filt_enabled(adapter
);
1253 case NDISC_NEIGHBOUR_ADVERTISEMENT
:
1254 os2bmc
= is_ipv6_na_filt_enabled(adapter
);
1262 if (is_udp_pkt((*skb
))) {
1263 struct udphdr
*udp
= udp_hdr((*skb
));
1265 switch (ntohs(udp
->dest
)) {
1266 case DHCP_CLIENT_PORT
:
1267 os2bmc
= is_dhcp_client_filt_enabled(adapter
);
1269 case DHCP_SERVER_PORT
:
1270 os2bmc
= is_dhcp_srvr_filt_enabled(adapter
);
1272 case NET_BIOS_PORT1
:
1273 case NET_BIOS_PORT2
:
1274 os2bmc
= is_nbios_filt_enabled(adapter
);
1276 case DHCPV6_RAS_PORT
:
1277 os2bmc
= is_ipv6_ras_filt_enabled(adapter
);
1284 /* For packets over a vlan, which are destined
1285 * to BMC, asic expects the vlan to be inline in the packet.
1288 *skb
= be_insert_vlan_in_pkt(adapter
, *skb
, NULL
);
1293 static netdev_tx_t
be_xmit(struct sk_buff
*skb
, struct net_device
*netdev
)
1295 struct be_adapter
*adapter
= netdev_priv(netdev
);
1296 u16 q_idx
= skb_get_queue_mapping(skb
);
1297 struct be_tx_obj
*txo
= &adapter
->tx_obj
[q_idx
];
1298 struct be_wrb_params wrb_params
= { 0 };
1299 bool flush
= !skb
->xmit_more
;
1302 skb
= be_xmit_workarounds(adapter
, skb
, &wrb_params
);
1306 be_get_wrb_params_from_skb(adapter
, skb
, &wrb_params
);
1308 wrb_cnt
= be_xmit_enqueue(adapter
, txo
, skb
, &wrb_params
);
1309 if (unlikely(!wrb_cnt
)) {
1310 dev_kfree_skb_any(skb
);
1314 /* if os2bmc is enabled and if the pkt is destined to bmc,
1315 * enqueue the pkt a 2nd time with mgmt bit set.
1317 if (be_send_pkt_to_bmc(adapter
, &skb
)) {
1318 BE_WRB_F_SET(wrb_params
.features
, OS2BMC
, 1);
1319 wrb_cnt
= be_xmit_enqueue(adapter
, txo
, skb
, &wrb_params
);
1320 if (unlikely(!wrb_cnt
))
1326 if (be_is_txq_full(txo
)) {
1327 netif_stop_subqueue(netdev
, q_idx
);
1328 tx_stats(txo
)->tx_stops
++;
1331 if (flush
|| __netif_subqueue_stopped(netdev
, q_idx
))
1332 be_xmit_flush(adapter
, txo
);
1334 return NETDEV_TX_OK
;
1336 tx_stats(txo
)->tx_drv_drops
++;
1337 /* Flush the already enqueued tx requests */
1338 if (flush
&& txo
->pend_wrb_cnt
)
1339 be_xmit_flush(adapter
, txo
);
1341 return NETDEV_TX_OK
;
1344 static int be_change_mtu(struct net_device
*netdev
, int new_mtu
)
1346 struct be_adapter
*adapter
= netdev_priv(netdev
);
1347 struct device
*dev
= &adapter
->pdev
->dev
;
1349 if (new_mtu
< BE_MIN_MTU
|| new_mtu
> BE_MAX_MTU
) {
1350 dev_info(dev
, "MTU must be between %d and %d bytes\n",
1351 BE_MIN_MTU
, BE_MAX_MTU
);
1355 dev_info(dev
, "MTU changed from %d to %d bytes\n",
1356 netdev
->mtu
, new_mtu
);
1357 netdev
->mtu
= new_mtu
;
1361 static inline bool be_in_all_promisc(struct be_adapter
*adapter
)
1363 return (adapter
->if_flags
& BE_IF_FLAGS_ALL_PROMISCUOUS
) ==
1364 BE_IF_FLAGS_ALL_PROMISCUOUS
;
1367 static int be_set_vlan_promisc(struct be_adapter
*adapter
)
1369 struct device
*dev
= &adapter
->pdev
->dev
;
1372 if (adapter
->if_flags
& BE_IF_FLAGS_VLAN_PROMISCUOUS
)
1375 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_VLAN_PROMISCUOUS
, ON
);
1377 dev_info(dev
, "Enabled VLAN promiscuous mode\n");
1378 adapter
->if_flags
|= BE_IF_FLAGS_VLAN_PROMISCUOUS
;
1380 dev_err(dev
, "Failed to enable VLAN promiscuous mode\n");
1385 static int be_clear_vlan_promisc(struct be_adapter
*adapter
)
1387 struct device
*dev
= &adapter
->pdev
->dev
;
1390 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_VLAN_PROMISCUOUS
, OFF
);
1392 dev_info(dev
, "Disabling VLAN promiscuous mode\n");
1393 adapter
->if_flags
&= ~BE_IF_FLAGS_VLAN_PROMISCUOUS
;
1399 * A max of 64 (BE_NUM_VLANS_SUPPORTED) vlans can be configured in BE.
1400 * If the user configures more, place BE in vlan promiscuous mode.
1402 static int be_vid_config(struct be_adapter
*adapter
)
1404 struct device
*dev
= &adapter
->pdev
->dev
;
1405 u16 vids
[BE_NUM_VLANS_SUPPORTED
];
1409 /* No need to further configure vids if in promiscuous mode */
1410 if (be_in_all_promisc(adapter
))
1413 if (adapter
->vlans_added
> be_max_vlans(adapter
))
1414 return be_set_vlan_promisc(adapter
);
1416 /* Construct VLAN Table to give to HW */
1417 for_each_set_bit(i
, adapter
->vids
, VLAN_N_VID
)
1418 vids
[num
++] = cpu_to_le16(i
);
1420 status
= be_cmd_vlan_config(adapter
, adapter
->if_handle
, vids
, num
, 0);
1422 dev_err(dev
, "Setting HW VLAN filtering failed\n");
1423 /* Set to VLAN promisc mode as setting VLAN filter failed */
1424 if (addl_status(status
) == MCC_ADDL_STATUS_INSUFFICIENT_VLANS
||
1425 addl_status(status
) ==
1426 MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES
)
1427 return be_set_vlan_promisc(adapter
);
1428 } else if (adapter
->if_flags
& BE_IF_FLAGS_VLAN_PROMISCUOUS
) {
1429 status
= be_clear_vlan_promisc(adapter
);
1434 static int be_vlan_add_vid(struct net_device
*netdev
, __be16 proto
, u16 vid
)
1436 struct be_adapter
*adapter
= netdev_priv(netdev
);
1439 /* Packets with VID 0 are always received by Lancer by default */
1440 if (lancer_chip(adapter
) && vid
== 0)
1443 if (test_bit(vid
, adapter
->vids
))
1446 set_bit(vid
, adapter
->vids
);
1447 adapter
->vlans_added
++;
1449 status
= be_vid_config(adapter
);
1451 adapter
->vlans_added
--;
1452 clear_bit(vid
, adapter
->vids
);
1458 static int be_vlan_rem_vid(struct net_device
*netdev
, __be16 proto
, u16 vid
)
1460 struct be_adapter
*adapter
= netdev_priv(netdev
);
1462 /* Packets with VID 0 are always received by Lancer by default */
1463 if (lancer_chip(adapter
) && vid
== 0)
1466 clear_bit(vid
, adapter
->vids
);
1467 adapter
->vlans_added
--;
1469 return be_vid_config(adapter
);
1472 static void be_clear_all_promisc(struct be_adapter
*adapter
)
1474 be_cmd_rx_filter(adapter
, BE_IF_FLAGS_ALL_PROMISCUOUS
, OFF
);
1475 adapter
->if_flags
&= ~BE_IF_FLAGS_ALL_PROMISCUOUS
;
1478 static void be_set_all_promisc(struct be_adapter
*adapter
)
1480 be_cmd_rx_filter(adapter
, BE_IF_FLAGS_ALL_PROMISCUOUS
, ON
);
1481 adapter
->if_flags
|= BE_IF_FLAGS_ALL_PROMISCUOUS
;
1484 static void be_set_mc_promisc(struct be_adapter
*adapter
)
1488 if (adapter
->if_flags
& BE_IF_FLAGS_MCAST_PROMISCUOUS
)
1491 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_MCAST_PROMISCUOUS
, ON
);
1493 adapter
->if_flags
|= BE_IF_FLAGS_MCAST_PROMISCUOUS
;
1496 static void be_set_mc_list(struct be_adapter
*adapter
)
1500 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_MULTICAST
, ON
);
1502 adapter
->if_flags
&= ~BE_IF_FLAGS_MCAST_PROMISCUOUS
;
1504 be_set_mc_promisc(adapter
);
1507 static void be_set_uc_list(struct be_adapter
*adapter
)
1509 struct netdev_hw_addr
*ha
;
1510 int i
= 1; /* First slot is claimed by the Primary MAC */
1512 for (; adapter
->uc_macs
> 0; adapter
->uc_macs
--, i
++)
1513 be_cmd_pmac_del(adapter
, adapter
->if_handle
,
1514 adapter
->pmac_id
[i
], 0);
1516 if (netdev_uc_count(adapter
->netdev
) > be_max_uc(adapter
)) {
1517 be_set_all_promisc(adapter
);
1521 netdev_for_each_uc_addr(ha
, adapter
->netdev
) {
1522 adapter
->uc_macs
++; /* First slot is for Primary MAC */
1523 be_cmd_pmac_add(adapter
, (u8
*)ha
->addr
, adapter
->if_handle
,
1524 &adapter
->pmac_id
[adapter
->uc_macs
], 0);
1528 static void be_clear_uc_list(struct be_adapter
*adapter
)
1532 for (i
= 1; i
< (adapter
->uc_macs
+ 1); i
++)
1533 be_cmd_pmac_del(adapter
, adapter
->if_handle
,
1534 adapter
->pmac_id
[i
], 0);
1535 adapter
->uc_macs
= 0;
1538 static void be_set_rx_mode(struct net_device
*netdev
)
1540 struct be_adapter
*adapter
= netdev_priv(netdev
);
1542 if (netdev
->flags
& IFF_PROMISC
) {
1543 be_set_all_promisc(adapter
);
1547 /* Interface was previously in promiscuous mode; disable it */
1548 if (be_in_all_promisc(adapter
)) {
1549 be_clear_all_promisc(adapter
);
1550 if (adapter
->vlans_added
)
1551 be_vid_config(adapter
);
1554 /* Enable multicast promisc if num configured exceeds what we support */
1555 if (netdev
->flags
& IFF_ALLMULTI
||
1556 netdev_mc_count(netdev
) > be_max_mc(adapter
)) {
1557 be_set_mc_promisc(adapter
);
1561 if (netdev_uc_count(netdev
) != adapter
->uc_macs
)
1562 be_set_uc_list(adapter
);
1564 be_set_mc_list(adapter
);
1567 static int be_set_vf_mac(struct net_device
*netdev
, int vf
, u8
*mac
)
1569 struct be_adapter
*adapter
= netdev_priv(netdev
);
1570 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1573 if (!sriov_enabled(adapter
))
1576 if (!is_valid_ether_addr(mac
) || vf
>= adapter
->num_vfs
)
1579 /* Proceed further only if user provided MAC is different
1582 if (ether_addr_equal(mac
, vf_cfg
->mac_addr
))
1585 if (BEx_chip(adapter
)) {
1586 be_cmd_pmac_del(adapter
, vf_cfg
->if_handle
, vf_cfg
->pmac_id
,
1589 status
= be_cmd_pmac_add(adapter
, mac
, vf_cfg
->if_handle
,
1590 &vf_cfg
->pmac_id
, vf
+ 1);
1592 status
= be_cmd_set_mac(adapter
, mac
, vf_cfg
->if_handle
,
1597 dev_err(&adapter
->pdev
->dev
, "MAC %pM set on VF %d Failed: %#x",
1599 return be_cmd_status(status
);
1602 ether_addr_copy(vf_cfg
->mac_addr
, mac
);
1607 static int be_get_vf_config(struct net_device
*netdev
, int vf
,
1608 struct ifla_vf_info
*vi
)
1610 struct be_adapter
*adapter
= netdev_priv(netdev
);
1611 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1613 if (!sriov_enabled(adapter
))
1616 if (vf
>= adapter
->num_vfs
)
1620 vi
->max_tx_rate
= vf_cfg
->tx_rate
;
1621 vi
->min_tx_rate
= 0;
1622 vi
->vlan
= vf_cfg
->vlan_tag
& VLAN_VID_MASK
;
1623 vi
->qos
= vf_cfg
->vlan_tag
>> VLAN_PRIO_SHIFT
;
1624 memcpy(&vi
->mac
, vf_cfg
->mac_addr
, ETH_ALEN
);
1625 vi
->linkstate
= adapter
->vf_cfg
[vf
].plink_tracking
;
1626 vi
->spoofchk
= adapter
->vf_cfg
[vf
].spoofchk
;
1631 static int be_set_vf_tvt(struct be_adapter
*adapter
, int vf
, u16 vlan
)
1633 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1634 u16 vids
[BE_NUM_VLANS_SUPPORTED
];
1635 int vf_if_id
= vf_cfg
->if_handle
;
1638 /* Enable Transparent VLAN Tagging */
1639 status
= be_cmd_set_hsw_config(adapter
, vlan
, vf
+ 1, vf_if_id
, 0, 0);
1643 /* Clear pre-programmed VLAN filters on VF if any, if TVT is enabled */
1645 status
= be_cmd_vlan_config(adapter
, vf_if_id
, vids
, 1, vf
+ 1);
1647 dev_info(&adapter
->pdev
->dev
,
1648 "Cleared guest VLANs on VF%d", vf
);
1650 /* After TVT is enabled, disallow VFs to program VLAN filters */
1651 if (vf_cfg
->privileges
& BE_PRIV_FILTMGMT
) {
1652 status
= be_cmd_set_fn_privileges(adapter
, vf_cfg
->privileges
&
1653 ~BE_PRIV_FILTMGMT
, vf
+ 1);
1655 vf_cfg
->privileges
&= ~BE_PRIV_FILTMGMT
;
1660 static int be_clear_vf_tvt(struct be_adapter
*adapter
, int vf
)
1662 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1663 struct device
*dev
= &adapter
->pdev
->dev
;
1666 /* Reset Transparent VLAN Tagging. */
1667 status
= be_cmd_set_hsw_config(adapter
, BE_RESET_VLAN_TAG_ID
, vf
+ 1,
1668 vf_cfg
->if_handle
, 0, 0);
1672 /* Allow VFs to program VLAN filtering */
1673 if (!(vf_cfg
->privileges
& BE_PRIV_FILTMGMT
)) {
1674 status
= be_cmd_set_fn_privileges(adapter
, vf_cfg
->privileges
|
1675 BE_PRIV_FILTMGMT
, vf
+ 1);
1677 vf_cfg
->privileges
|= BE_PRIV_FILTMGMT
;
1678 dev_info(dev
, "VF%d: FILTMGMT priv enabled", vf
);
1683 "Disable/re-enable i/f in VM to clear Transparent VLAN tag");
1687 static int be_set_vf_vlan(struct net_device
*netdev
, int vf
, u16 vlan
, u8 qos
)
1689 struct be_adapter
*adapter
= netdev_priv(netdev
);
1690 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1693 if (!sriov_enabled(adapter
))
1696 if (vf
>= adapter
->num_vfs
|| vlan
> 4095 || qos
> 7)
1700 vlan
|= qos
<< VLAN_PRIO_SHIFT
;
1701 status
= be_set_vf_tvt(adapter
, vf
, vlan
);
1703 status
= be_clear_vf_tvt(adapter
, vf
);
1707 dev_err(&adapter
->pdev
->dev
,
1708 "VLAN %d config on VF %d failed : %#x\n", vlan
, vf
,
1710 return be_cmd_status(status
);
1713 vf_cfg
->vlan_tag
= vlan
;
1717 static int be_set_vf_tx_rate(struct net_device
*netdev
, int vf
,
1718 int min_tx_rate
, int max_tx_rate
)
1720 struct be_adapter
*adapter
= netdev_priv(netdev
);
1721 struct device
*dev
= &adapter
->pdev
->dev
;
1722 int percent_rate
, status
= 0;
1726 if (!sriov_enabled(adapter
))
1729 if (vf
>= adapter
->num_vfs
)
1738 status
= be_cmd_link_status_query(adapter
, &link_speed
,
1744 dev_err(dev
, "TX-rate setting not allowed when link is down\n");
1749 if (max_tx_rate
< 100 || max_tx_rate
> link_speed
) {
1750 dev_err(dev
, "TX-rate must be between 100 and %d Mbps\n",
1756 /* On Skyhawk the QOS setting must be done only as a % value */
1757 percent_rate
= link_speed
/ 100;
1758 if (skyhawk_chip(adapter
) && (max_tx_rate
% percent_rate
)) {
1759 dev_err(dev
, "TX-rate must be a multiple of %d Mbps\n",
1766 status
= be_cmd_config_qos(adapter
, max_tx_rate
, link_speed
, vf
+ 1);
1770 adapter
->vf_cfg
[vf
].tx_rate
= max_tx_rate
;
1774 dev_err(dev
, "TX-rate setting of %dMbps on VF%d failed\n",
1776 return be_cmd_status(status
);
1779 static int be_set_vf_link_state(struct net_device
*netdev
, int vf
,
1782 struct be_adapter
*adapter
= netdev_priv(netdev
);
1785 if (!sriov_enabled(adapter
))
1788 if (vf
>= adapter
->num_vfs
)
1791 status
= be_cmd_set_logical_link_config(adapter
, link_state
, vf
+1);
1793 dev_err(&adapter
->pdev
->dev
,
1794 "Link state change on VF %d failed: %#x\n", vf
, status
);
1795 return be_cmd_status(status
);
1798 adapter
->vf_cfg
[vf
].plink_tracking
= link_state
;
1803 static int be_set_vf_spoofchk(struct net_device
*netdev
, int vf
, bool enable
)
1805 struct be_adapter
*adapter
= netdev_priv(netdev
);
1806 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1810 if (!sriov_enabled(adapter
))
1813 if (vf
>= adapter
->num_vfs
)
1816 if (BEx_chip(adapter
))
1819 if (enable
== vf_cfg
->spoofchk
)
1822 spoofchk
= enable
? ENABLE_MAC_SPOOFCHK
: DISABLE_MAC_SPOOFCHK
;
1824 status
= be_cmd_set_hsw_config(adapter
, 0, vf
+ 1, vf_cfg
->if_handle
,
1827 dev_err(&adapter
->pdev
->dev
,
1828 "Spoofchk change on VF %d failed: %#x\n", vf
, status
);
1829 return be_cmd_status(status
);
1832 vf_cfg
->spoofchk
= enable
;
1836 static void be_aic_update(struct be_aic_obj
*aic
, u64 rx_pkts
, u64 tx_pkts
,
1839 aic
->rx_pkts_prev
= rx_pkts
;
1840 aic
->tx_reqs_prev
= tx_pkts
;
1844 static int be_get_new_eqd(struct be_eq_obj
*eqo
)
1846 struct be_adapter
*adapter
= eqo
->adapter
;
1848 struct be_aic_obj
*aic
;
1849 struct be_rx_obj
*rxo
;
1850 struct be_tx_obj
*txo
;
1851 u64 rx_pkts
= 0, tx_pkts
= 0;
1856 aic
= &adapter
->aic_obj
[eqo
->idx
];
1864 for_all_rx_queues_on_eq(adapter
, eqo
, rxo
, i
) {
1866 start
= u64_stats_fetch_begin_irq(&rxo
->stats
.sync
);
1867 rx_pkts
+= rxo
->stats
.rx_pkts
;
1868 } while (u64_stats_fetch_retry_irq(&rxo
->stats
.sync
, start
));
1871 for_all_tx_queues_on_eq(adapter
, eqo
, txo
, i
) {
1873 start
= u64_stats_fetch_begin_irq(&txo
->stats
.sync
);
1874 tx_pkts
+= txo
->stats
.tx_reqs
;
1875 } while (u64_stats_fetch_retry_irq(&txo
->stats
.sync
, start
));
1878 /* Skip, if wrapped around or first calculation */
1880 if (!aic
->jiffies
|| time_before(now
, aic
->jiffies
) ||
1881 rx_pkts
< aic
->rx_pkts_prev
||
1882 tx_pkts
< aic
->tx_reqs_prev
) {
1883 be_aic_update(aic
, rx_pkts
, tx_pkts
, now
);
1884 return aic
->prev_eqd
;
1887 delta
= jiffies_to_msecs(now
- aic
->jiffies
);
1889 return aic
->prev_eqd
;
1891 pps
= (((u32
)(rx_pkts
- aic
->rx_pkts_prev
) * 1000) / delta
) +
1892 (((u32
)(tx_pkts
- aic
->tx_reqs_prev
) * 1000) / delta
);
1893 eqd
= (pps
/ 15000) << 2;
1897 eqd
= min_t(u32
, eqd
, aic
->max_eqd
);
1898 eqd
= max_t(u32
, eqd
, aic
->min_eqd
);
1900 be_aic_update(aic
, rx_pkts
, tx_pkts
, now
);
1905 /* For Skyhawk-R only */
1906 static u32
be_get_eq_delay_mult_enc(struct be_eq_obj
*eqo
)
1908 struct be_adapter
*adapter
= eqo
->adapter
;
1909 struct be_aic_obj
*aic
= &adapter
->aic_obj
[eqo
->idx
];
1910 ulong now
= jiffies
;
1917 if (time_before_eq(now
, aic
->jiffies
) ||
1918 jiffies_to_msecs(now
- aic
->jiffies
) < 1)
1919 eqd
= aic
->prev_eqd
;
1921 eqd
= be_get_new_eqd(eqo
);
1924 mult_enc
= R2I_DLY_ENC_1
;
1926 mult_enc
= R2I_DLY_ENC_2
;
1928 mult_enc
= R2I_DLY_ENC_3
;
1930 mult_enc
= R2I_DLY_ENC_0
;
1932 aic
->prev_eqd
= eqd
;
1937 void be_eqd_update(struct be_adapter
*adapter
, bool force_update
)
1939 struct be_set_eqd set_eqd
[MAX_EVT_QS
];
1940 struct be_aic_obj
*aic
;
1941 struct be_eq_obj
*eqo
;
1942 int i
, num
= 0, eqd
;
1944 for_all_evt_queues(adapter
, eqo
, i
) {
1945 aic
= &adapter
->aic_obj
[eqo
->idx
];
1946 eqd
= be_get_new_eqd(eqo
);
1947 if (force_update
|| eqd
!= aic
->prev_eqd
) {
1948 set_eqd
[num
].delay_multiplier
= (eqd
* 65)/100;
1949 set_eqd
[num
].eq_id
= eqo
->q
.id
;
1950 aic
->prev_eqd
= eqd
;
1956 be_cmd_modify_eqd(adapter
, set_eqd
, num
);
1959 static void be_rx_stats_update(struct be_rx_obj
*rxo
,
1960 struct be_rx_compl_info
*rxcp
)
1962 struct be_rx_stats
*stats
= rx_stats(rxo
);
1964 u64_stats_update_begin(&stats
->sync
);
1966 stats
->rx_bytes
+= rxcp
->pkt_size
;
1969 stats
->rx_vxlan_offload_pkts
++;
1970 if (rxcp
->pkt_type
== BE_MULTICAST_PACKET
)
1971 stats
->rx_mcast_pkts
++;
1973 stats
->rx_compl_err
++;
1974 u64_stats_update_end(&stats
->sync
);
1977 static inline bool csum_passed(struct be_rx_compl_info
*rxcp
)
1979 /* L4 checksum is not reliable for non TCP/UDP packets.
1980 * Also ignore ipcksm for ipv6 pkts
1982 return (rxcp
->tcpf
|| rxcp
->udpf
) && rxcp
->l4_csum
&&
1983 (rxcp
->ip_csum
|| rxcp
->ipv6
) && !rxcp
->err
;
1986 static struct be_rx_page_info
*get_rx_page_info(struct be_rx_obj
*rxo
)
1988 struct be_adapter
*adapter
= rxo
->adapter
;
1989 struct be_rx_page_info
*rx_page_info
;
1990 struct be_queue_info
*rxq
= &rxo
->q
;
1991 u16 frag_idx
= rxq
->tail
;
1993 rx_page_info
= &rxo
->page_info_tbl
[frag_idx
];
1994 BUG_ON(!rx_page_info
->page
);
1996 if (rx_page_info
->last_frag
) {
1997 dma_unmap_page(&adapter
->pdev
->dev
,
1998 dma_unmap_addr(rx_page_info
, bus
),
1999 adapter
->big_page_size
, DMA_FROM_DEVICE
);
2000 rx_page_info
->last_frag
= false;
2002 dma_sync_single_for_cpu(&adapter
->pdev
->dev
,
2003 dma_unmap_addr(rx_page_info
, bus
),
2004 rx_frag_size
, DMA_FROM_DEVICE
);
2007 queue_tail_inc(rxq
);
2008 atomic_dec(&rxq
->used
);
2009 return rx_page_info
;
2012 /* Throwaway the data in the Rx completion */
2013 static void be_rx_compl_discard(struct be_rx_obj
*rxo
,
2014 struct be_rx_compl_info
*rxcp
)
2016 struct be_rx_page_info
*page_info
;
2017 u16 i
, num_rcvd
= rxcp
->num_rcvd
;
2019 for (i
= 0; i
< num_rcvd
; i
++) {
2020 page_info
= get_rx_page_info(rxo
);
2021 put_page(page_info
->page
);
2022 memset(page_info
, 0, sizeof(*page_info
));
2027 * skb_fill_rx_data forms a complete skb for an ether frame
2028 * indicated by rxcp.
2030 static void skb_fill_rx_data(struct be_rx_obj
*rxo
, struct sk_buff
*skb
,
2031 struct be_rx_compl_info
*rxcp
)
2033 struct be_rx_page_info
*page_info
;
2035 u16 hdr_len
, curr_frag_len
, remaining
;
2038 page_info
= get_rx_page_info(rxo
);
2039 start
= page_address(page_info
->page
) + page_info
->page_offset
;
2042 /* Copy data in the first descriptor of this completion */
2043 curr_frag_len
= min(rxcp
->pkt_size
, rx_frag_size
);
2045 skb
->len
= curr_frag_len
;
2046 if (curr_frag_len
<= BE_HDR_LEN
) { /* tiny packet */
2047 memcpy(skb
->data
, start
, curr_frag_len
);
2048 /* Complete packet has now been moved to data */
2049 put_page(page_info
->page
);
2051 skb
->tail
+= curr_frag_len
;
2054 memcpy(skb
->data
, start
, hdr_len
);
2055 skb_shinfo(skb
)->nr_frags
= 1;
2056 skb_frag_set_page(skb
, 0, page_info
->page
);
2057 skb_shinfo(skb
)->frags
[0].page_offset
=
2058 page_info
->page_offset
+ hdr_len
;
2059 skb_frag_size_set(&skb_shinfo(skb
)->frags
[0],
2060 curr_frag_len
- hdr_len
);
2061 skb
->data_len
= curr_frag_len
- hdr_len
;
2062 skb
->truesize
+= rx_frag_size
;
2063 skb
->tail
+= hdr_len
;
2065 page_info
->page
= NULL
;
2067 if (rxcp
->pkt_size
<= rx_frag_size
) {
2068 BUG_ON(rxcp
->num_rcvd
!= 1);
2072 /* More frags present for this completion */
2073 remaining
= rxcp
->pkt_size
- curr_frag_len
;
2074 for (i
= 1, j
= 0; i
< rxcp
->num_rcvd
; i
++) {
2075 page_info
= get_rx_page_info(rxo
);
2076 curr_frag_len
= min(remaining
, rx_frag_size
);
2078 /* Coalesce all frags from the same physical page in one slot */
2079 if (page_info
->page_offset
== 0) {
2082 skb_frag_set_page(skb
, j
, page_info
->page
);
2083 skb_shinfo(skb
)->frags
[j
].page_offset
=
2084 page_info
->page_offset
;
2085 skb_frag_size_set(&skb_shinfo(skb
)->frags
[j
], 0);
2086 skb_shinfo(skb
)->nr_frags
++;
2088 put_page(page_info
->page
);
2091 skb_frag_size_add(&skb_shinfo(skb
)->frags
[j
], curr_frag_len
);
2092 skb
->len
+= curr_frag_len
;
2093 skb
->data_len
+= curr_frag_len
;
2094 skb
->truesize
+= rx_frag_size
;
2095 remaining
-= curr_frag_len
;
2096 page_info
->page
= NULL
;
2098 BUG_ON(j
> MAX_SKB_FRAGS
);
2101 /* Process the RX completion indicated by rxcp when GRO is disabled */
2102 static void be_rx_compl_process(struct be_rx_obj
*rxo
, struct napi_struct
*napi
,
2103 struct be_rx_compl_info
*rxcp
)
2105 struct be_adapter
*adapter
= rxo
->adapter
;
2106 struct net_device
*netdev
= adapter
->netdev
;
2107 struct sk_buff
*skb
;
2109 skb
= netdev_alloc_skb_ip_align(netdev
, BE_RX_SKB_ALLOC_SIZE
);
2110 if (unlikely(!skb
)) {
2111 rx_stats(rxo
)->rx_drops_no_skbs
++;
2112 be_rx_compl_discard(rxo
, rxcp
);
2116 skb_fill_rx_data(rxo
, skb
, rxcp
);
2118 if (likely((netdev
->features
& NETIF_F_RXCSUM
) && csum_passed(rxcp
)))
2119 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
2121 skb_checksum_none_assert(skb
);
2123 skb
->protocol
= eth_type_trans(skb
, netdev
);
2124 skb_record_rx_queue(skb
, rxo
- &adapter
->rx_obj
[0]);
2125 if (netdev
->features
& NETIF_F_RXHASH
)
2126 skb_set_hash(skb
, rxcp
->rss_hash
, PKT_HASH_TYPE_L3
);
2128 skb
->csum_level
= rxcp
->tunneled
;
2129 skb_mark_napi_id(skb
, napi
);
2132 __vlan_hwaccel_put_tag(skb
, htons(ETH_P_8021Q
), rxcp
->vlan_tag
);
2134 netif_receive_skb(skb
);
2137 /* Process the RX completion indicated by rxcp when GRO is enabled */
2138 static void be_rx_compl_process_gro(struct be_rx_obj
*rxo
,
2139 struct napi_struct
*napi
,
2140 struct be_rx_compl_info
*rxcp
)
2142 struct be_adapter
*adapter
= rxo
->adapter
;
2143 struct be_rx_page_info
*page_info
;
2144 struct sk_buff
*skb
= NULL
;
2145 u16 remaining
, curr_frag_len
;
2148 skb
= napi_get_frags(napi
);
2150 be_rx_compl_discard(rxo
, rxcp
);
2154 remaining
= rxcp
->pkt_size
;
2155 for (i
= 0, j
= -1; i
< rxcp
->num_rcvd
; i
++) {
2156 page_info
= get_rx_page_info(rxo
);
2158 curr_frag_len
= min(remaining
, rx_frag_size
);
2160 /* Coalesce all frags from the same physical page in one slot */
2161 if (i
== 0 || page_info
->page_offset
== 0) {
2162 /* First frag or Fresh page */
2164 skb_frag_set_page(skb
, j
, page_info
->page
);
2165 skb_shinfo(skb
)->frags
[j
].page_offset
=
2166 page_info
->page_offset
;
2167 skb_frag_size_set(&skb_shinfo(skb
)->frags
[j
], 0);
2169 put_page(page_info
->page
);
2171 skb_frag_size_add(&skb_shinfo(skb
)->frags
[j
], curr_frag_len
);
2172 skb
->truesize
+= rx_frag_size
;
2173 remaining
-= curr_frag_len
;
2174 memset(page_info
, 0, sizeof(*page_info
));
2176 BUG_ON(j
> MAX_SKB_FRAGS
);
2178 skb_shinfo(skb
)->nr_frags
= j
+ 1;
2179 skb
->len
= rxcp
->pkt_size
;
2180 skb
->data_len
= rxcp
->pkt_size
;
2181 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
2182 skb_record_rx_queue(skb
, rxo
- &adapter
->rx_obj
[0]);
2183 if (adapter
->netdev
->features
& NETIF_F_RXHASH
)
2184 skb_set_hash(skb
, rxcp
->rss_hash
, PKT_HASH_TYPE_L3
);
2186 skb
->csum_level
= rxcp
->tunneled
;
2189 __vlan_hwaccel_put_tag(skb
, htons(ETH_P_8021Q
), rxcp
->vlan_tag
);
2191 napi_gro_frags(napi
);
2194 static void be_parse_rx_compl_v1(struct be_eth_rx_compl
*compl,
2195 struct be_rx_compl_info
*rxcp
)
2197 rxcp
->pkt_size
= GET_RX_COMPL_V1_BITS(pktsize
, compl);
2198 rxcp
->vlanf
= GET_RX_COMPL_V1_BITS(vtp
, compl);
2199 rxcp
->err
= GET_RX_COMPL_V1_BITS(err
, compl);
2200 rxcp
->tcpf
= GET_RX_COMPL_V1_BITS(tcpf
, compl);
2201 rxcp
->udpf
= GET_RX_COMPL_V1_BITS(udpf
, compl);
2202 rxcp
->ip_csum
= GET_RX_COMPL_V1_BITS(ipcksm
, compl);
2203 rxcp
->l4_csum
= GET_RX_COMPL_V1_BITS(l4_cksm
, compl);
2204 rxcp
->ipv6
= GET_RX_COMPL_V1_BITS(ip_version
, compl);
2205 rxcp
->num_rcvd
= GET_RX_COMPL_V1_BITS(numfrags
, compl);
2206 rxcp
->pkt_type
= GET_RX_COMPL_V1_BITS(cast_enc
, compl);
2207 rxcp
->rss_hash
= GET_RX_COMPL_V1_BITS(rsshash
, compl);
2209 rxcp
->qnq
= GET_RX_COMPL_V1_BITS(qnq
, compl);
2210 rxcp
->vlan_tag
= GET_RX_COMPL_V1_BITS(vlan_tag
, compl);
2212 rxcp
->port
= GET_RX_COMPL_V1_BITS(port
, compl);
2214 GET_RX_COMPL_V1_BITS(tunneled
, compl);
2217 static void be_parse_rx_compl_v0(struct be_eth_rx_compl
*compl,
2218 struct be_rx_compl_info
*rxcp
)
2220 rxcp
->pkt_size
= GET_RX_COMPL_V0_BITS(pktsize
, compl);
2221 rxcp
->vlanf
= GET_RX_COMPL_V0_BITS(vtp
, compl);
2222 rxcp
->err
= GET_RX_COMPL_V0_BITS(err
, compl);
2223 rxcp
->tcpf
= GET_RX_COMPL_V0_BITS(tcpf
, compl);
2224 rxcp
->udpf
= GET_RX_COMPL_V0_BITS(udpf
, compl);
2225 rxcp
->ip_csum
= GET_RX_COMPL_V0_BITS(ipcksm
, compl);
2226 rxcp
->l4_csum
= GET_RX_COMPL_V0_BITS(l4_cksm
, compl);
2227 rxcp
->ipv6
= GET_RX_COMPL_V0_BITS(ip_version
, compl);
2228 rxcp
->num_rcvd
= GET_RX_COMPL_V0_BITS(numfrags
, compl);
2229 rxcp
->pkt_type
= GET_RX_COMPL_V0_BITS(cast_enc
, compl);
2230 rxcp
->rss_hash
= GET_RX_COMPL_V0_BITS(rsshash
, compl);
2232 rxcp
->qnq
= GET_RX_COMPL_V0_BITS(qnq
, compl);
2233 rxcp
->vlan_tag
= GET_RX_COMPL_V0_BITS(vlan_tag
, compl);
2235 rxcp
->port
= GET_RX_COMPL_V0_BITS(port
, compl);
2236 rxcp
->ip_frag
= GET_RX_COMPL_V0_BITS(ip_frag
, compl);
2239 static struct be_rx_compl_info
*be_rx_compl_get(struct be_rx_obj
*rxo
)
2241 struct be_eth_rx_compl
*compl = queue_tail_node(&rxo
->cq
);
2242 struct be_rx_compl_info
*rxcp
= &rxo
->rxcp
;
2243 struct be_adapter
*adapter
= rxo
->adapter
;
2245 /* For checking the valid bit it is Ok to use either definition as the
2246 * valid bit is at the same position in both v0 and v1 Rx compl */
2247 if (compl->dw
[offsetof(struct amap_eth_rx_compl_v1
, valid
) / 32] == 0)
2251 be_dws_le_to_cpu(compl, sizeof(*compl));
2253 if (adapter
->be3_native
)
2254 be_parse_rx_compl_v1(compl, rxcp
);
2256 be_parse_rx_compl_v0(compl, rxcp
);
2262 /* In QNQ modes, if qnq bit is not set, then the packet was
2263 * tagged only with the transparent outer vlan-tag and must
2264 * not be treated as a vlan packet by host
2266 if (be_is_qnq_mode(adapter
) && !rxcp
->qnq
)
2269 if (!lancer_chip(adapter
))
2270 rxcp
->vlan_tag
= swab16(rxcp
->vlan_tag
);
2272 if (adapter
->pvid
== (rxcp
->vlan_tag
& VLAN_VID_MASK
) &&
2273 !test_bit(rxcp
->vlan_tag
, adapter
->vids
))
2277 /* As the compl has been parsed, reset it; we wont touch it again */
2278 compl->dw
[offsetof(struct amap_eth_rx_compl_v1
, valid
) / 32] = 0;
2280 queue_tail_inc(&rxo
->cq
);
2284 static inline struct page
*be_alloc_pages(u32 size
, gfp_t gfp
)
2286 u32 order
= get_order(size
);
2290 return alloc_pages(gfp
, order
);
2294 * Allocate a page, split it to fragments of size rx_frag_size and post as
2295 * receive buffers to BE
2297 static void be_post_rx_frags(struct be_rx_obj
*rxo
, gfp_t gfp
, u32 frags_needed
)
2299 struct be_adapter
*adapter
= rxo
->adapter
;
2300 struct be_rx_page_info
*page_info
= NULL
, *prev_page_info
= NULL
;
2301 struct be_queue_info
*rxq
= &rxo
->q
;
2302 struct page
*pagep
= NULL
;
2303 struct device
*dev
= &adapter
->pdev
->dev
;
2304 struct be_eth_rx_d
*rxd
;
2305 u64 page_dmaaddr
= 0, frag_dmaaddr
;
2306 u32 posted
, page_offset
= 0, notify
= 0;
2308 page_info
= &rxo
->page_info_tbl
[rxq
->head
];
2309 for (posted
= 0; posted
< frags_needed
&& !page_info
->page
; posted
++) {
2311 pagep
= be_alloc_pages(adapter
->big_page_size
, gfp
);
2312 if (unlikely(!pagep
)) {
2313 rx_stats(rxo
)->rx_post_fail
++;
2316 page_dmaaddr
= dma_map_page(dev
, pagep
, 0,
2317 adapter
->big_page_size
,
2319 if (dma_mapping_error(dev
, page_dmaaddr
)) {
2322 adapter
->drv_stats
.dma_map_errors
++;
2328 page_offset
+= rx_frag_size
;
2330 page_info
->page_offset
= page_offset
;
2331 page_info
->page
= pagep
;
2333 rxd
= queue_head_node(rxq
);
2334 frag_dmaaddr
= page_dmaaddr
+ page_info
->page_offset
;
2335 rxd
->fragpa_lo
= cpu_to_le32(frag_dmaaddr
& 0xFFFFFFFF);
2336 rxd
->fragpa_hi
= cpu_to_le32(upper_32_bits(frag_dmaaddr
));
2338 /* Any space left in the current big page for another frag? */
2339 if ((page_offset
+ rx_frag_size
+ rx_frag_size
) >
2340 adapter
->big_page_size
) {
2342 page_info
->last_frag
= true;
2343 dma_unmap_addr_set(page_info
, bus
, page_dmaaddr
);
2345 dma_unmap_addr_set(page_info
, bus
, frag_dmaaddr
);
2348 prev_page_info
= page_info
;
2349 queue_head_inc(rxq
);
2350 page_info
= &rxo
->page_info_tbl
[rxq
->head
];
2353 /* Mark the last frag of a page when we break out of the above loop
2354 * with no more slots available in the RXQ
2357 prev_page_info
->last_frag
= true;
2358 dma_unmap_addr_set(prev_page_info
, bus
, page_dmaaddr
);
2362 atomic_add(posted
, &rxq
->used
);
2363 if (rxo
->rx_post_starved
)
2364 rxo
->rx_post_starved
= false;
2366 notify
= min(MAX_NUM_POST_ERX_DB
, posted
);
2367 be_rxq_notify(adapter
, rxq
->id
, notify
);
2370 } else if (atomic_read(&rxq
->used
) == 0) {
2371 /* Let be_worker replenish when memory is available */
2372 rxo
->rx_post_starved
= true;
2376 static struct be_tx_compl_info
*be_tx_compl_get(struct be_tx_obj
*txo
)
2378 struct be_queue_info
*tx_cq
= &txo
->cq
;
2379 struct be_tx_compl_info
*txcp
= &txo
->txcp
;
2380 struct be_eth_tx_compl
*compl = queue_tail_node(tx_cq
);
2382 if (compl->dw
[offsetof(struct amap_eth_tx_compl
, valid
) / 32] == 0)
2385 /* Ensure load ordering of valid bit dword and other dwords below */
2387 be_dws_le_to_cpu(compl, sizeof(*compl));
2389 txcp
->status
= GET_TX_COMPL_BITS(status
, compl);
2390 txcp
->end_index
= GET_TX_COMPL_BITS(wrb_index
, compl);
2392 compl->dw
[offsetof(struct amap_eth_tx_compl
, valid
) / 32] = 0;
2393 queue_tail_inc(tx_cq
);
2397 static u16
be_tx_compl_process(struct be_adapter
*adapter
,
2398 struct be_tx_obj
*txo
, u16 last_index
)
2400 struct sk_buff
**sent_skbs
= txo
->sent_skb_list
;
2401 struct be_queue_info
*txq
= &txo
->q
;
2402 u16 frag_index
, num_wrbs
= 0;
2403 struct sk_buff
*skb
= NULL
;
2404 bool unmap_skb_hdr
= false;
2405 struct be_eth_wrb
*wrb
;
2408 if (sent_skbs
[txq
->tail
]) {
2409 /* Free skb from prev req */
2411 dev_consume_skb_any(skb
);
2412 skb
= sent_skbs
[txq
->tail
];
2413 sent_skbs
[txq
->tail
] = NULL
;
2414 queue_tail_inc(txq
); /* skip hdr wrb */
2416 unmap_skb_hdr
= true;
2418 wrb
= queue_tail_node(txq
);
2419 frag_index
= txq
->tail
;
2420 unmap_tx_frag(&adapter
->pdev
->dev
, wrb
,
2421 (unmap_skb_hdr
&& skb_headlen(skb
)));
2422 unmap_skb_hdr
= false;
2423 queue_tail_inc(txq
);
2425 } while (frag_index
!= last_index
);
2426 dev_consume_skb_any(skb
);
2431 /* Return the number of events in the event queue */
2432 static inline int events_get(struct be_eq_obj
*eqo
)
2434 struct be_eq_entry
*eqe
;
2438 eqe
= queue_tail_node(&eqo
->q
);
2445 queue_tail_inc(&eqo
->q
);
2451 /* Leaves the EQ is disarmed state */
2452 static void be_eq_clean(struct be_eq_obj
*eqo
)
2454 int num
= events_get(eqo
);
2456 be_eq_notify(eqo
->adapter
, eqo
->q
.id
, false, true, num
, 0);
2459 /* Free posted rx buffers that were not used */
2460 static void be_rxq_clean(struct be_rx_obj
*rxo
)
2462 struct be_queue_info
*rxq
= &rxo
->q
;
2463 struct be_rx_page_info
*page_info
;
2465 while (atomic_read(&rxq
->used
) > 0) {
2466 page_info
= get_rx_page_info(rxo
);
2467 put_page(page_info
->page
);
2468 memset(page_info
, 0, sizeof(*page_info
));
2470 BUG_ON(atomic_read(&rxq
->used
));
2475 static void be_rx_cq_clean(struct be_rx_obj
*rxo
)
2477 struct be_queue_info
*rx_cq
= &rxo
->cq
;
2478 struct be_rx_compl_info
*rxcp
;
2479 struct be_adapter
*adapter
= rxo
->adapter
;
2482 /* Consume pending rx completions.
2483 * Wait for the flush completion (identified by zero num_rcvd)
2484 * to arrive. Notify CQ even when there are no more CQ entries
2485 * for HW to flush partially coalesced CQ entries.
2486 * In Lancer, there is no need to wait for flush compl.
2489 rxcp
= be_rx_compl_get(rxo
);
2491 if (lancer_chip(adapter
))
2494 if (flush_wait
++ > 50 ||
2495 be_check_error(adapter
,
2497 dev_warn(&adapter
->pdev
->dev
,
2498 "did not receive flush compl\n");
2501 be_cq_notify(adapter
, rx_cq
->id
, true, 0);
2504 be_rx_compl_discard(rxo
, rxcp
);
2505 be_cq_notify(adapter
, rx_cq
->id
, false, 1);
2506 if (rxcp
->num_rcvd
== 0)
2511 /* After cleanup, leave the CQ in unarmed state */
2512 be_cq_notify(adapter
, rx_cq
->id
, false, 0);
2515 static void be_tx_compl_clean(struct be_adapter
*adapter
)
2517 u16 end_idx
, notified_idx
, cmpl
= 0, timeo
= 0, num_wrbs
= 0;
2518 struct device
*dev
= &adapter
->pdev
->dev
;
2519 struct be_tx_compl_info
*txcp
;
2520 struct be_queue_info
*txq
;
2521 struct be_tx_obj
*txo
;
2522 int i
, pending_txqs
;
2524 /* Stop polling for compls when HW has been silent for 10ms */
2526 pending_txqs
= adapter
->num_tx_qs
;
2528 for_all_tx_queues(adapter
, txo
, i
) {
2532 while ((txcp
= be_tx_compl_get(txo
))) {
2534 be_tx_compl_process(adapter
, txo
,
2539 be_cq_notify(adapter
, txo
->cq
.id
, false, cmpl
);
2540 atomic_sub(num_wrbs
, &txq
->used
);
2543 if (!be_is_tx_compl_pending(txo
))
2547 if (pending_txqs
== 0 || ++timeo
> 10 ||
2548 be_check_error(adapter
, BE_ERROR_HW
))
2554 /* Free enqueued TX that was never notified to HW */
2555 for_all_tx_queues(adapter
, txo
, i
) {
2558 if (atomic_read(&txq
->used
)) {
2559 dev_info(dev
, "txq%d: cleaning %d pending tx-wrbs\n",
2560 i
, atomic_read(&txq
->used
));
2561 notified_idx
= txq
->tail
;
2562 end_idx
= txq
->tail
;
2563 index_adv(&end_idx
, atomic_read(&txq
->used
) - 1,
2565 /* Use the tx-compl process logic to handle requests
2566 * that were not sent to the HW.
2568 num_wrbs
= be_tx_compl_process(adapter
, txo
, end_idx
);
2569 atomic_sub(num_wrbs
, &txq
->used
);
2570 BUG_ON(atomic_read(&txq
->used
));
2571 txo
->pend_wrb_cnt
= 0;
2572 /* Since hw was never notified of these requests,
2575 txq
->head
= notified_idx
;
2576 txq
->tail
= notified_idx
;
2581 static void be_evt_queues_destroy(struct be_adapter
*adapter
)
2583 struct be_eq_obj
*eqo
;
2586 for_all_evt_queues(adapter
, eqo
, i
) {
2587 if (eqo
->q
.created
) {
2589 be_cmd_q_destroy(adapter
, &eqo
->q
, QTYPE_EQ
);
2590 napi_hash_del(&eqo
->napi
);
2591 netif_napi_del(&eqo
->napi
);
2592 free_cpumask_var(eqo
->affinity_mask
);
2594 be_queue_free(adapter
, &eqo
->q
);
2598 static int be_evt_queues_create(struct be_adapter
*adapter
)
2600 struct be_queue_info
*eq
;
2601 struct be_eq_obj
*eqo
;
2602 struct be_aic_obj
*aic
;
2605 adapter
->num_evt_qs
= min_t(u16
, num_irqs(adapter
),
2606 adapter
->cfg_num_qs
);
2608 for_all_evt_queues(adapter
, eqo
, i
) {
2609 int numa_node
= dev_to_node(&adapter
->pdev
->dev
);
2611 aic
= &adapter
->aic_obj
[i
];
2612 eqo
->adapter
= adapter
;
2614 aic
->max_eqd
= BE_MAX_EQD
;
2618 rc
= be_queue_alloc(adapter
, eq
, EVNT_Q_LEN
,
2619 sizeof(struct be_eq_entry
));
2623 rc
= be_cmd_eq_create(adapter
, eqo
);
2627 if (!zalloc_cpumask_var(&eqo
->affinity_mask
, GFP_KERNEL
))
2629 cpumask_set_cpu(cpumask_local_spread(i
, numa_node
),
2630 eqo
->affinity_mask
);
2631 netif_napi_add(adapter
->netdev
, &eqo
->napi
, be_poll
,
2637 static void be_mcc_queues_destroy(struct be_adapter
*adapter
)
2639 struct be_queue_info
*q
;
2641 q
= &adapter
->mcc_obj
.q
;
2643 be_cmd_q_destroy(adapter
, q
, QTYPE_MCCQ
);
2644 be_queue_free(adapter
, q
);
2646 q
= &adapter
->mcc_obj
.cq
;
2648 be_cmd_q_destroy(adapter
, q
, QTYPE_CQ
);
2649 be_queue_free(adapter
, q
);
2652 /* Must be called only after TX qs are created as MCC shares TX EQ */
2653 static int be_mcc_queues_create(struct be_adapter
*adapter
)
2655 struct be_queue_info
*q
, *cq
;
2657 cq
= &adapter
->mcc_obj
.cq
;
2658 if (be_queue_alloc(adapter
, cq
, MCC_CQ_LEN
,
2659 sizeof(struct be_mcc_compl
)))
2662 /* Use the default EQ for MCC completions */
2663 if (be_cmd_cq_create(adapter
, cq
, &mcc_eqo(adapter
)->q
, true, 0))
2666 q
= &adapter
->mcc_obj
.q
;
2667 if (be_queue_alloc(adapter
, q
, MCC_Q_LEN
, sizeof(struct be_mcc_wrb
)))
2668 goto mcc_cq_destroy
;
2670 if (be_cmd_mccq_create(adapter
, q
, cq
))
2676 be_queue_free(adapter
, q
);
2678 be_cmd_q_destroy(adapter
, cq
, QTYPE_CQ
);
2680 be_queue_free(adapter
, cq
);
2685 static void be_tx_queues_destroy(struct be_adapter
*adapter
)
2687 struct be_queue_info
*q
;
2688 struct be_tx_obj
*txo
;
2691 for_all_tx_queues(adapter
, txo
, i
) {
2694 be_cmd_q_destroy(adapter
, q
, QTYPE_TXQ
);
2695 be_queue_free(adapter
, q
);
2699 be_cmd_q_destroy(adapter
, q
, QTYPE_CQ
);
2700 be_queue_free(adapter
, q
);
2704 static int be_tx_qs_create(struct be_adapter
*adapter
)
2706 struct be_queue_info
*cq
;
2707 struct be_tx_obj
*txo
;
2708 struct be_eq_obj
*eqo
;
2711 adapter
->num_tx_qs
= min(adapter
->num_evt_qs
, be_max_txqs(adapter
));
2713 for_all_tx_queues(adapter
, txo
, i
) {
2715 status
= be_queue_alloc(adapter
, cq
, TX_CQ_LEN
,
2716 sizeof(struct be_eth_tx_compl
));
2720 u64_stats_init(&txo
->stats
.sync
);
2721 u64_stats_init(&txo
->stats
.sync_compl
);
2723 /* If num_evt_qs is less than num_tx_qs, then more than
2724 * one txq share an eq
2726 eqo
= &adapter
->eq_obj
[i
% adapter
->num_evt_qs
];
2727 status
= be_cmd_cq_create(adapter
, cq
, &eqo
->q
, false, 3);
2731 status
= be_queue_alloc(adapter
, &txo
->q
, TX_Q_LEN
,
2732 sizeof(struct be_eth_wrb
));
2736 status
= be_cmd_txq_create(adapter
, txo
);
2740 netif_set_xps_queue(adapter
->netdev
, eqo
->affinity_mask
,
2744 dev_info(&adapter
->pdev
->dev
, "created %d TX queue(s)\n",
2745 adapter
->num_tx_qs
);
2749 static void be_rx_cqs_destroy(struct be_adapter
*adapter
)
2751 struct be_queue_info
*q
;
2752 struct be_rx_obj
*rxo
;
2755 for_all_rx_queues(adapter
, rxo
, i
) {
2758 be_cmd_q_destroy(adapter
, q
, QTYPE_CQ
);
2759 be_queue_free(adapter
, q
);
2763 static int be_rx_cqs_create(struct be_adapter
*adapter
)
2765 struct be_queue_info
*eq
, *cq
;
2766 struct be_rx_obj
*rxo
;
2769 /* We can create as many RSS rings as there are EQs. */
2770 adapter
->num_rss_qs
= adapter
->num_evt_qs
;
2772 /* We'll use RSS only if atleast 2 RSS rings are supported. */
2773 if (adapter
->num_rss_qs
<= 1)
2774 adapter
->num_rss_qs
= 0;
2776 adapter
->num_rx_qs
= adapter
->num_rss_qs
+ adapter
->need_def_rxq
;
2778 /* When the interface is not capable of RSS rings (and there is no
2779 * need to create a default RXQ) we'll still need one RXQ
2781 if (adapter
->num_rx_qs
== 0)
2782 adapter
->num_rx_qs
= 1;
2784 adapter
->big_page_size
= (1 << get_order(rx_frag_size
)) * PAGE_SIZE
;
2785 for_all_rx_queues(adapter
, rxo
, i
) {
2786 rxo
->adapter
= adapter
;
2788 rc
= be_queue_alloc(adapter
, cq
, RX_CQ_LEN
,
2789 sizeof(struct be_eth_rx_compl
));
2793 u64_stats_init(&rxo
->stats
.sync
);
2794 eq
= &adapter
->eq_obj
[i
% adapter
->num_evt_qs
].q
;
2795 rc
= be_cmd_cq_create(adapter
, cq
, eq
, false, 3);
2800 dev_info(&adapter
->pdev
->dev
,
2801 "created %d RX queue(s)\n", adapter
->num_rx_qs
);
2805 static irqreturn_t
be_intx(int irq
, void *dev
)
2807 struct be_eq_obj
*eqo
= dev
;
2808 struct be_adapter
*adapter
= eqo
->adapter
;
2811 /* IRQ is not expected when NAPI is scheduled as the EQ
2812 * will not be armed.
2813 * But, this can happen on Lancer INTx where it takes
2814 * a while to de-assert INTx or in BE2 where occasionaly
2815 * an interrupt may be raised even when EQ is unarmed.
2816 * If NAPI is already scheduled, then counting & notifying
2817 * events will orphan them.
2819 if (napi_schedule_prep(&eqo
->napi
)) {
2820 num_evts
= events_get(eqo
);
2821 __napi_schedule(&eqo
->napi
);
2823 eqo
->spurious_intr
= 0;
2825 be_eq_notify(adapter
, eqo
->q
.id
, false, true, num_evts
, 0);
2827 /* Return IRQ_HANDLED only for the the first spurious intr
2828 * after a valid intr to stop the kernel from branding
2829 * this irq as a bad one!
2831 if (num_evts
|| eqo
->spurious_intr
++ == 0)
2837 static irqreturn_t
be_msix(int irq
, void *dev
)
2839 struct be_eq_obj
*eqo
= dev
;
2841 be_eq_notify(eqo
->adapter
, eqo
->q
.id
, false, true, 0, 0);
2842 napi_schedule(&eqo
->napi
);
2846 static inline bool do_gro(struct be_rx_compl_info
*rxcp
)
2848 return (rxcp
->tcpf
&& !rxcp
->err
&& rxcp
->l4_csum
) ? true : false;
2851 static int be_process_rx(struct be_rx_obj
*rxo
, struct napi_struct
*napi
,
2852 int budget
, int polling
)
2854 struct be_adapter
*adapter
= rxo
->adapter
;
2855 struct be_queue_info
*rx_cq
= &rxo
->cq
;
2856 struct be_rx_compl_info
*rxcp
;
2858 u32 frags_consumed
= 0;
2860 for (work_done
= 0; work_done
< budget
; work_done
++) {
2861 rxcp
= be_rx_compl_get(rxo
);
2865 /* Is it a flush compl that has no data */
2866 if (unlikely(rxcp
->num_rcvd
== 0))
2869 /* Discard compl with partial DMA Lancer B0 */
2870 if (unlikely(!rxcp
->pkt_size
)) {
2871 be_rx_compl_discard(rxo
, rxcp
);
2875 /* On BE drop pkts that arrive due to imperfect filtering in
2876 * promiscuous mode on some skews
2878 if (unlikely(rxcp
->port
!= adapter
->port_num
&&
2879 !lancer_chip(adapter
))) {
2880 be_rx_compl_discard(rxo
, rxcp
);
2884 /* Don't do gro when we're busy_polling */
2885 if (do_gro(rxcp
) && polling
!= BUSY_POLLING
)
2886 be_rx_compl_process_gro(rxo
, napi
, rxcp
);
2888 be_rx_compl_process(rxo
, napi
, rxcp
);
2891 frags_consumed
+= rxcp
->num_rcvd
;
2892 be_rx_stats_update(rxo
, rxcp
);
2896 be_cq_notify(adapter
, rx_cq
->id
, true, work_done
);
2898 /* When an rx-obj gets into post_starved state, just
2899 * let be_worker do the posting.
2901 if (atomic_read(&rxo
->q
.used
) < RX_FRAGS_REFILL_WM
&&
2902 !rxo
->rx_post_starved
)
2903 be_post_rx_frags(rxo
, GFP_ATOMIC
,
2904 max_t(u32
, MAX_RX_POST
,
2911 static inline void be_update_tx_err(struct be_tx_obj
*txo
, u8 status
)
2914 case BE_TX_COMP_HDR_PARSE_ERR
:
2915 tx_stats(txo
)->tx_hdr_parse_err
++;
2917 case BE_TX_COMP_NDMA_ERR
:
2918 tx_stats(txo
)->tx_dma_err
++;
2920 case BE_TX_COMP_ACL_ERR
:
2921 tx_stats(txo
)->tx_spoof_check_err
++;
2926 static inline void lancer_update_tx_err(struct be_tx_obj
*txo
, u8 status
)
2929 case LANCER_TX_COMP_LSO_ERR
:
2930 tx_stats(txo
)->tx_tso_err
++;
2932 case LANCER_TX_COMP_HSW_DROP_MAC_ERR
:
2933 case LANCER_TX_COMP_HSW_DROP_VLAN_ERR
:
2934 tx_stats(txo
)->tx_spoof_check_err
++;
2936 case LANCER_TX_COMP_QINQ_ERR
:
2937 tx_stats(txo
)->tx_qinq_err
++;
2939 case LANCER_TX_COMP_PARITY_ERR
:
2940 tx_stats(txo
)->tx_internal_parity_err
++;
2942 case LANCER_TX_COMP_DMA_ERR
:
2943 tx_stats(txo
)->tx_dma_err
++;
2948 static void be_process_tx(struct be_adapter
*adapter
, struct be_tx_obj
*txo
,
2951 int num_wrbs
= 0, work_done
= 0;
2952 struct be_tx_compl_info
*txcp
;
2954 while ((txcp
= be_tx_compl_get(txo
))) {
2955 num_wrbs
+= be_tx_compl_process(adapter
, txo
, txcp
->end_index
);
2959 if (lancer_chip(adapter
))
2960 lancer_update_tx_err(txo
, txcp
->status
);
2962 be_update_tx_err(txo
, txcp
->status
);
2967 be_cq_notify(adapter
, txo
->cq
.id
, true, work_done
);
2968 atomic_sub(num_wrbs
, &txo
->q
.used
);
2970 /* As Tx wrbs have been freed up, wake up netdev queue
2971 * if it was stopped due to lack of tx wrbs. */
2972 if (__netif_subqueue_stopped(adapter
->netdev
, idx
) &&
2973 be_can_txq_wake(txo
)) {
2974 netif_wake_subqueue(adapter
->netdev
, idx
);
2977 u64_stats_update_begin(&tx_stats(txo
)->sync_compl
);
2978 tx_stats(txo
)->tx_compl
+= work_done
;
2979 u64_stats_update_end(&tx_stats(txo
)->sync_compl
);
2983 #ifdef CONFIG_NET_RX_BUSY_POLL
2984 static inline bool be_lock_napi(struct be_eq_obj
*eqo
)
2988 spin_lock(&eqo
->lock
); /* BH is already disabled */
2989 if (eqo
->state
& BE_EQ_LOCKED
) {
2990 WARN_ON(eqo
->state
& BE_EQ_NAPI
);
2991 eqo
->state
|= BE_EQ_NAPI_YIELD
;
2994 eqo
->state
= BE_EQ_NAPI
;
2996 spin_unlock(&eqo
->lock
);
3000 static inline void be_unlock_napi(struct be_eq_obj
*eqo
)
3002 spin_lock(&eqo
->lock
); /* BH is already disabled */
3004 WARN_ON(eqo
->state
& (BE_EQ_POLL
| BE_EQ_NAPI_YIELD
));
3005 eqo
->state
= BE_EQ_IDLE
;
3007 spin_unlock(&eqo
->lock
);
3010 static inline bool be_lock_busy_poll(struct be_eq_obj
*eqo
)
3014 spin_lock_bh(&eqo
->lock
);
3015 if (eqo
->state
& BE_EQ_LOCKED
) {
3016 eqo
->state
|= BE_EQ_POLL_YIELD
;
3019 eqo
->state
|= BE_EQ_POLL
;
3021 spin_unlock_bh(&eqo
->lock
);
3025 static inline void be_unlock_busy_poll(struct be_eq_obj
*eqo
)
3027 spin_lock_bh(&eqo
->lock
);
3029 WARN_ON(eqo
->state
& (BE_EQ_NAPI
));
3030 eqo
->state
= BE_EQ_IDLE
;
3032 spin_unlock_bh(&eqo
->lock
);
3035 static inline void be_enable_busy_poll(struct be_eq_obj
*eqo
)
3037 spin_lock_init(&eqo
->lock
);
3038 eqo
->state
= BE_EQ_IDLE
;
3041 static inline void be_disable_busy_poll(struct be_eq_obj
*eqo
)
3045 /* It's enough to just acquire napi lock on the eqo to stop
3046 * be_busy_poll() from processing any queueus.
3048 while (!be_lock_napi(eqo
))
3054 #else /* CONFIG_NET_RX_BUSY_POLL */
3056 static inline bool be_lock_napi(struct be_eq_obj
*eqo
)
3061 static inline void be_unlock_napi(struct be_eq_obj
*eqo
)
3065 static inline bool be_lock_busy_poll(struct be_eq_obj
*eqo
)
3070 static inline void be_unlock_busy_poll(struct be_eq_obj
*eqo
)
3074 static inline void be_enable_busy_poll(struct be_eq_obj
*eqo
)
3078 static inline void be_disable_busy_poll(struct be_eq_obj
*eqo
)
3081 #endif /* CONFIG_NET_RX_BUSY_POLL */
3083 int be_poll(struct napi_struct
*napi
, int budget
)
3085 struct be_eq_obj
*eqo
= container_of(napi
, struct be_eq_obj
, napi
);
3086 struct be_adapter
*adapter
= eqo
->adapter
;
3087 int max_work
= 0, work
, i
, num_evts
;
3088 struct be_rx_obj
*rxo
;
3089 struct be_tx_obj
*txo
;
3092 num_evts
= events_get(eqo
);
3094 for_all_tx_queues_on_eq(adapter
, eqo
, txo
, i
)
3095 be_process_tx(adapter
, txo
, i
);
3097 if (be_lock_napi(eqo
)) {
3098 /* This loop will iterate twice for EQ0 in which
3099 * completions of the last RXQ (default one) are also processed
3100 * For other EQs the loop iterates only once
3102 for_all_rx_queues_on_eq(adapter
, eqo
, rxo
, i
) {
3103 work
= be_process_rx(rxo
, napi
, budget
, NAPI_POLLING
);
3104 max_work
= max(work
, max_work
);
3106 be_unlock_napi(eqo
);
3111 if (is_mcc_eqo(eqo
))
3112 be_process_mcc(adapter
);
3114 if (max_work
< budget
) {
3115 napi_complete(napi
);
3117 /* Skyhawk EQ_DB has a provision to set the rearm to interrupt
3118 * delay via a delay multiplier encoding value
3120 if (skyhawk_chip(adapter
))
3121 mult_enc
= be_get_eq_delay_mult_enc(eqo
);
3123 be_eq_notify(adapter
, eqo
->q
.id
, true, false, num_evts
,
3126 /* As we'll continue in polling mode, count and clear events */
3127 be_eq_notify(adapter
, eqo
->q
.id
, false, false, num_evts
, 0);
3132 #ifdef CONFIG_NET_RX_BUSY_POLL
3133 static int be_busy_poll(struct napi_struct
*napi
)
3135 struct be_eq_obj
*eqo
= container_of(napi
, struct be_eq_obj
, napi
);
3136 struct be_adapter
*adapter
= eqo
->adapter
;
3137 struct be_rx_obj
*rxo
;
3140 if (!be_lock_busy_poll(eqo
))
3141 return LL_FLUSH_BUSY
;
3143 for_all_rx_queues_on_eq(adapter
, eqo
, rxo
, i
) {
3144 work
= be_process_rx(rxo
, napi
, 4, BUSY_POLLING
);
3149 be_unlock_busy_poll(eqo
);
3154 void be_detect_error(struct be_adapter
*adapter
)
3156 u32 ue_lo
= 0, ue_hi
= 0, ue_lo_mask
= 0, ue_hi_mask
= 0;
3157 u32 sliport_status
= 0, sliport_err1
= 0, sliport_err2
= 0;
3159 struct device
*dev
= &adapter
->pdev
->dev
;
3161 if (be_check_error(adapter
, BE_ERROR_HW
))
3164 if (lancer_chip(adapter
)) {
3165 sliport_status
= ioread32(adapter
->db
+ SLIPORT_STATUS_OFFSET
);
3166 if (sliport_status
& SLIPORT_STATUS_ERR_MASK
) {
3167 be_set_error(adapter
, BE_ERROR_UE
);
3168 sliport_err1
= ioread32(adapter
->db
+
3169 SLIPORT_ERROR1_OFFSET
);
3170 sliport_err2
= ioread32(adapter
->db
+
3171 SLIPORT_ERROR2_OFFSET
);
3172 /* Do not log error messages if its a FW reset */
3173 if (sliport_err1
== SLIPORT_ERROR_FW_RESET1
&&
3174 sliport_err2
== SLIPORT_ERROR_FW_RESET2
) {
3175 dev_info(dev
, "Firmware update in progress\n");
3177 dev_err(dev
, "Error detected in the card\n");
3178 dev_err(dev
, "ERR: sliport status 0x%x\n",
3180 dev_err(dev
, "ERR: sliport error1 0x%x\n",
3182 dev_err(dev
, "ERR: sliport error2 0x%x\n",
3187 ue_lo
= ioread32(adapter
->pcicfg
+ PCICFG_UE_STATUS_LOW
);
3188 ue_hi
= ioread32(adapter
->pcicfg
+ PCICFG_UE_STATUS_HIGH
);
3189 ue_lo_mask
= ioread32(adapter
->pcicfg
+
3190 PCICFG_UE_STATUS_LOW_MASK
);
3191 ue_hi_mask
= ioread32(adapter
->pcicfg
+
3192 PCICFG_UE_STATUS_HI_MASK
);
3194 ue_lo
= (ue_lo
& ~ue_lo_mask
);
3195 ue_hi
= (ue_hi
& ~ue_hi_mask
);
3197 /* On certain platforms BE hardware can indicate spurious UEs.
3198 * Allow HW to stop working completely in case of a real UE.
3199 * Hence not setting the hw_error for UE detection.
3202 if (ue_lo
|| ue_hi
) {
3204 "Unrecoverable Error detected in the adapter");
3205 dev_err(dev
, "Please reboot server to recover");
3206 if (skyhawk_chip(adapter
))
3207 be_set_error(adapter
, BE_ERROR_UE
);
3209 for (i
= 0; ue_lo
; ue_lo
>>= 1, i
++) {
3211 dev_err(dev
, "UE: %s bit set\n",
3212 ue_status_low_desc
[i
]);
3214 for (i
= 0; ue_hi
; ue_hi
>>= 1, i
++) {
3216 dev_err(dev
, "UE: %s bit set\n",
3217 ue_status_hi_desc
[i
]);
3223 static void be_msix_disable(struct be_adapter
*adapter
)
3225 if (msix_enabled(adapter
)) {
3226 pci_disable_msix(adapter
->pdev
);
3227 adapter
->num_msix_vec
= 0;
3228 adapter
->num_msix_roce_vec
= 0;
3232 static int be_msix_enable(struct be_adapter
*adapter
)
3235 struct device
*dev
= &adapter
->pdev
->dev
;
3237 /* If RoCE is supported, program the max number of NIC vectors that
3238 * may be configured via set-channels, along with vectors needed for
3239 * RoCe. Else, just program the number we'll use initially.
3241 if (be_roce_supported(adapter
))
3242 num_vec
= min_t(int, 2 * be_max_eqs(adapter
),
3243 2 * num_online_cpus());
3245 num_vec
= adapter
->cfg_num_qs
;
3247 for (i
= 0; i
< num_vec
; i
++)
3248 adapter
->msix_entries
[i
].entry
= i
;
3250 num_vec
= pci_enable_msix_range(adapter
->pdev
, adapter
->msix_entries
,
3251 MIN_MSIX_VECTORS
, num_vec
);
3255 if (be_roce_supported(adapter
) && num_vec
> MIN_MSIX_VECTORS
) {
3256 adapter
->num_msix_roce_vec
= num_vec
/ 2;
3257 dev_info(dev
, "enabled %d MSI-x vector(s) for RoCE\n",
3258 adapter
->num_msix_roce_vec
);
3261 adapter
->num_msix_vec
= num_vec
- adapter
->num_msix_roce_vec
;
3263 dev_info(dev
, "enabled %d MSI-x vector(s) for NIC\n",
3264 adapter
->num_msix_vec
);
3268 dev_warn(dev
, "MSIx enable failed\n");
3270 /* INTx is not supported in VFs, so fail probe if enable_msix fails */
3271 if (be_virtfn(adapter
))
3276 static inline int be_msix_vec_get(struct be_adapter
*adapter
,
3277 struct be_eq_obj
*eqo
)
3279 return adapter
->msix_entries
[eqo
->msix_idx
].vector
;
3282 static int be_msix_register(struct be_adapter
*adapter
)
3284 struct net_device
*netdev
= adapter
->netdev
;
3285 struct be_eq_obj
*eqo
;
3288 for_all_evt_queues(adapter
, eqo
, i
) {
3289 sprintf(eqo
->desc
, "%s-q%d", netdev
->name
, i
);
3290 vec
= be_msix_vec_get(adapter
, eqo
);
3291 status
= request_irq(vec
, be_msix
, 0, eqo
->desc
, eqo
);
3295 irq_set_affinity_hint(vec
, eqo
->affinity_mask
);
3300 for (i
--; i
>= 0; i
--) {
3301 eqo
= &adapter
->eq_obj
[i
];
3302 free_irq(be_msix_vec_get(adapter
, eqo
), eqo
);
3304 dev_warn(&adapter
->pdev
->dev
, "MSIX Request IRQ failed - err %d\n",
3306 be_msix_disable(adapter
);
3310 static int be_irq_register(struct be_adapter
*adapter
)
3312 struct net_device
*netdev
= adapter
->netdev
;
3315 if (msix_enabled(adapter
)) {
3316 status
= be_msix_register(adapter
);
3319 /* INTx is not supported for VF */
3320 if (be_virtfn(adapter
))
3324 /* INTx: only the first EQ is used */
3325 netdev
->irq
= adapter
->pdev
->irq
;
3326 status
= request_irq(netdev
->irq
, be_intx
, IRQF_SHARED
, netdev
->name
,
3327 &adapter
->eq_obj
[0]);
3329 dev_err(&adapter
->pdev
->dev
,
3330 "INTx request IRQ failed - err %d\n", status
);
3334 adapter
->isr_registered
= true;
3338 static void be_irq_unregister(struct be_adapter
*adapter
)
3340 struct net_device
*netdev
= adapter
->netdev
;
3341 struct be_eq_obj
*eqo
;
3344 if (!adapter
->isr_registered
)
3348 if (!msix_enabled(adapter
)) {
3349 free_irq(netdev
->irq
, &adapter
->eq_obj
[0]);
3354 for_all_evt_queues(adapter
, eqo
, i
) {
3355 vec
= be_msix_vec_get(adapter
, eqo
);
3356 irq_set_affinity_hint(vec
, NULL
);
3361 adapter
->isr_registered
= false;
3364 static void be_rx_qs_destroy(struct be_adapter
*adapter
)
3366 struct be_queue_info
*q
;
3367 struct be_rx_obj
*rxo
;
3370 for_all_rx_queues(adapter
, rxo
, i
) {
3373 /* If RXQs are destroyed while in an "out of buffer"
3374 * state, there is a possibility of an HW stall on
3375 * Lancer. So, post 64 buffers to each queue to relieve
3376 * the "out of buffer" condition.
3377 * Make sure there's space in the RXQ before posting.
3379 if (lancer_chip(adapter
)) {
3380 be_rx_cq_clean(rxo
);
3381 if (atomic_read(&q
->used
) == 0)
3382 be_post_rx_frags(rxo
, GFP_KERNEL
,
3386 be_cmd_rxq_destroy(adapter
, q
);
3387 be_rx_cq_clean(rxo
);
3390 be_queue_free(adapter
, q
);
3394 static void be_disable_if_filters(struct be_adapter
*adapter
)
3396 be_cmd_pmac_del(adapter
, adapter
->if_handle
,
3397 adapter
->pmac_id
[0], 0);
3399 be_clear_uc_list(adapter
);
3401 /* The IFACE flags are enabled in the open path and cleared
3402 * in the close path. When a VF gets detached from the host and
3403 * assigned to a VM the following happens:
3404 * - VF's IFACE flags get cleared in the detach path
3405 * - IFACE create is issued by the VF in the attach path
3406 * Due to a bug in the BE3/Skyhawk-R FW
3407 * (Lancer FW doesn't have the bug), the IFACE capability flags
3408 * specified along with the IFACE create cmd issued by a VF are not
3409 * honoured by FW. As a consequence, if a *new* driver
3410 * (that enables/disables IFACE flags in open/close)
3411 * is loaded in the host and an *old* driver is * used by a VM/VF,
3412 * the IFACE gets created *without* the needed flags.
3413 * To avoid this, disable RX-filter flags only for Lancer.
3415 if (lancer_chip(adapter
)) {
3416 be_cmd_rx_filter(adapter
, BE_IF_ALL_FILT_FLAGS
, OFF
);
3417 adapter
->if_flags
&= ~BE_IF_ALL_FILT_FLAGS
;
3421 static int be_close(struct net_device
*netdev
)
3423 struct be_adapter
*adapter
= netdev_priv(netdev
);
3424 struct be_eq_obj
*eqo
;
3427 /* This protection is needed as be_close() may be called even when the
3428 * adapter is in cleared state (after eeh perm failure)
3430 if (!(adapter
->flags
& BE_FLAGS_SETUP_DONE
))
3433 be_disable_if_filters(adapter
);
3435 if (adapter
->flags
& BE_FLAGS_NAPI_ENABLED
) {
3436 for_all_evt_queues(adapter
, eqo
, i
) {
3437 napi_disable(&eqo
->napi
);
3438 be_disable_busy_poll(eqo
);
3440 adapter
->flags
&= ~BE_FLAGS_NAPI_ENABLED
;
3443 be_async_mcc_disable(adapter
);
3445 /* Wait for all pending tx completions to arrive so that
3446 * all tx skbs are freed.
3448 netif_tx_disable(netdev
);
3449 be_tx_compl_clean(adapter
);
3451 be_rx_qs_destroy(adapter
);
3453 for_all_evt_queues(adapter
, eqo
, i
) {
3454 if (msix_enabled(adapter
))
3455 synchronize_irq(be_msix_vec_get(adapter
, eqo
));
3457 synchronize_irq(netdev
->irq
);
3461 be_irq_unregister(adapter
);
3466 static int be_rx_qs_create(struct be_adapter
*adapter
)
3468 struct rss_info
*rss
= &adapter
->rss_info
;
3469 u8 rss_key
[RSS_HASH_KEY_LEN
];
3470 struct be_rx_obj
*rxo
;
3473 for_all_rx_queues(adapter
, rxo
, i
) {
3474 rc
= be_queue_alloc(adapter
, &rxo
->q
, RX_Q_LEN
,
3475 sizeof(struct be_eth_rx_d
));
3480 if (adapter
->need_def_rxq
|| !adapter
->num_rss_qs
) {
3481 rxo
= default_rxo(adapter
);
3482 rc
= be_cmd_rxq_create(adapter
, &rxo
->q
, rxo
->cq
.id
,
3483 rx_frag_size
, adapter
->if_handle
,
3484 false, &rxo
->rss_id
);
3489 for_all_rss_queues(adapter
, rxo
, i
) {
3490 rc
= be_cmd_rxq_create(adapter
, &rxo
->q
, rxo
->cq
.id
,
3491 rx_frag_size
, adapter
->if_handle
,
3492 true, &rxo
->rss_id
);
3497 if (be_multi_rxq(adapter
)) {
3498 for (j
= 0; j
< RSS_INDIR_TABLE_LEN
; j
+= adapter
->num_rss_qs
) {
3499 for_all_rss_queues(adapter
, rxo
, i
) {
3500 if ((j
+ i
) >= RSS_INDIR_TABLE_LEN
)
3502 rss
->rsstable
[j
+ i
] = rxo
->rss_id
;
3503 rss
->rss_queue
[j
+ i
] = i
;
3506 rss
->rss_flags
= RSS_ENABLE_TCP_IPV4
| RSS_ENABLE_IPV4
|
3507 RSS_ENABLE_TCP_IPV6
| RSS_ENABLE_IPV6
;
3509 if (!BEx_chip(adapter
))
3510 rss
->rss_flags
|= RSS_ENABLE_UDP_IPV4
|
3511 RSS_ENABLE_UDP_IPV6
;
3513 /* Disable RSS, if only default RX Q is created */
3514 rss
->rss_flags
= RSS_ENABLE_NONE
;
3517 netdev_rss_key_fill(rss_key
, RSS_HASH_KEY_LEN
);
3518 rc
= be_cmd_rss_config(adapter
, rss
->rsstable
, rss
->rss_flags
,
3519 RSS_INDIR_TABLE_LEN
, rss_key
);
3521 rss
->rss_flags
= RSS_ENABLE_NONE
;
3525 memcpy(rss
->rss_hkey
, rss_key
, RSS_HASH_KEY_LEN
);
3527 /* Post 1 less than RXQ-len to avoid head being equal to tail,
3528 * which is a queue empty condition
3530 for_all_rx_queues(adapter
, rxo
, i
)
3531 be_post_rx_frags(rxo
, GFP_KERNEL
, RX_Q_LEN
- 1);
3536 static int be_enable_if_filters(struct be_adapter
*adapter
)
3540 status
= be_cmd_rx_filter(adapter
, BE_IF_EN_FLAGS
, ON
);
3544 /* For BE3 VFs, the PF programs the initial MAC address */
3545 if (!(BEx_chip(adapter
) && be_virtfn(adapter
))) {
3546 status
= be_cmd_pmac_add(adapter
, adapter
->netdev
->dev_addr
,
3548 &adapter
->pmac_id
[0], 0);
3553 if (adapter
->vlans_added
)
3554 be_vid_config(adapter
);
3556 be_set_rx_mode(adapter
->netdev
);
3561 static int be_open(struct net_device
*netdev
)
3563 struct be_adapter
*adapter
= netdev_priv(netdev
);
3564 struct be_eq_obj
*eqo
;
3565 struct be_rx_obj
*rxo
;
3566 struct be_tx_obj
*txo
;
3570 status
= be_rx_qs_create(adapter
);
3574 status
= be_enable_if_filters(adapter
);
3578 status
= be_irq_register(adapter
);
3582 for_all_rx_queues(adapter
, rxo
, i
)
3583 be_cq_notify(adapter
, rxo
->cq
.id
, true, 0);
3585 for_all_tx_queues(adapter
, txo
, i
)
3586 be_cq_notify(adapter
, txo
->cq
.id
, true, 0);
3588 be_async_mcc_enable(adapter
);
3590 for_all_evt_queues(adapter
, eqo
, i
) {
3591 napi_enable(&eqo
->napi
);
3592 be_enable_busy_poll(eqo
);
3593 be_eq_notify(adapter
, eqo
->q
.id
, true, true, 0, 0);
3595 adapter
->flags
|= BE_FLAGS_NAPI_ENABLED
;
3597 status
= be_cmd_link_status_query(adapter
, NULL
, &link_status
, 0);
3599 be_link_status_update(adapter
, link_status
);
3601 netif_tx_start_all_queues(netdev
);
3602 #ifdef CONFIG_BE2NET_VXLAN
3603 if (skyhawk_chip(adapter
))
3604 vxlan_get_rx_port(netdev
);
3609 be_close(adapter
->netdev
);
3613 static int be_setup_wol(struct be_adapter
*adapter
, bool enable
)
3615 struct device
*dev
= &adapter
->pdev
->dev
;
3616 struct be_dma_mem cmd
;
3622 cmd
.size
= sizeof(struct be_cmd_req_acpi_wol_magic_config
);
3623 cmd
.va
= dma_zalloc_coherent(dev
, cmd
.size
, &cmd
.dma
, GFP_KERNEL
);
3628 status
= pci_write_config_dword(adapter
->pdev
,
3629 PCICFG_PM_CONTROL_OFFSET
,
3630 PCICFG_PM_CONTROL_MASK
);
3632 dev_err(dev
, "Could not enable Wake-on-lan\n");
3636 ether_addr_copy(mac
, adapter
->netdev
->dev_addr
);
3639 status
= be_cmd_enable_magic_wol(adapter
, mac
, &cmd
);
3640 pci_enable_wake(adapter
->pdev
, PCI_D3hot
, enable
);
3641 pci_enable_wake(adapter
->pdev
, PCI_D3cold
, enable
);
3643 dma_free_coherent(dev
, cmd
.size
, cmd
.va
, cmd
.dma
);
3647 static void be_vf_eth_addr_generate(struct be_adapter
*adapter
, u8
*mac
)
3651 addr
= jhash(adapter
->netdev
->dev_addr
, ETH_ALEN
, 0);
3653 mac
[5] = (u8
)(addr
& 0xFF);
3654 mac
[4] = (u8
)((addr
>> 8) & 0xFF);
3655 mac
[3] = (u8
)((addr
>> 16) & 0xFF);
3656 /* Use the OUI from the current MAC address */
3657 memcpy(mac
, adapter
->netdev
->dev_addr
, 3);
3661 * Generate a seed MAC address from the PF MAC Address using jhash.
3662 * MAC Address for VFs are assigned incrementally starting from the seed.
3663 * These addresses are programmed in the ASIC by the PF and the VF driver
3664 * queries for the MAC address during its probe.
3666 static int be_vf_eth_addr_config(struct be_adapter
*adapter
)
3671 struct be_vf_cfg
*vf_cfg
;
3673 be_vf_eth_addr_generate(adapter
, mac
);
3675 for_all_vfs(adapter
, vf_cfg
, vf
) {
3676 if (BEx_chip(adapter
))
3677 status
= be_cmd_pmac_add(adapter
, mac
,
3679 &vf_cfg
->pmac_id
, vf
+ 1);
3681 status
= be_cmd_set_mac(adapter
, mac
, vf_cfg
->if_handle
,
3685 dev_err(&adapter
->pdev
->dev
,
3686 "Mac address assignment failed for VF %d\n",
3689 memcpy(vf_cfg
->mac_addr
, mac
, ETH_ALEN
);
3696 static int be_vfs_mac_query(struct be_adapter
*adapter
)
3700 struct be_vf_cfg
*vf_cfg
;
3702 for_all_vfs(adapter
, vf_cfg
, vf
) {
3703 status
= be_cmd_get_active_mac(adapter
, vf_cfg
->pmac_id
,
3704 mac
, vf_cfg
->if_handle
,
3708 memcpy(vf_cfg
->mac_addr
, mac
, ETH_ALEN
);
3713 static void be_vf_clear(struct be_adapter
*adapter
)
3715 struct be_vf_cfg
*vf_cfg
;
3718 if (pci_vfs_assigned(adapter
->pdev
)) {
3719 dev_warn(&adapter
->pdev
->dev
,
3720 "VFs are assigned to VMs: not disabling VFs\n");
3724 pci_disable_sriov(adapter
->pdev
);
3726 for_all_vfs(adapter
, vf_cfg
, vf
) {
3727 if (BEx_chip(adapter
))
3728 be_cmd_pmac_del(adapter
, vf_cfg
->if_handle
,
3729 vf_cfg
->pmac_id
, vf
+ 1);
3731 be_cmd_set_mac(adapter
, NULL
, vf_cfg
->if_handle
,
3734 be_cmd_if_destroy(adapter
, vf_cfg
->if_handle
, vf
+ 1);
3737 kfree(adapter
->vf_cfg
);
3738 adapter
->num_vfs
= 0;
3739 adapter
->flags
&= ~BE_FLAGS_SRIOV_ENABLED
;
3742 static void be_clear_queues(struct be_adapter
*adapter
)
3744 be_mcc_queues_destroy(adapter
);
3745 be_rx_cqs_destroy(adapter
);
3746 be_tx_queues_destroy(adapter
);
3747 be_evt_queues_destroy(adapter
);
3750 static void be_cancel_worker(struct be_adapter
*adapter
)
3752 if (adapter
->flags
& BE_FLAGS_WORKER_SCHEDULED
) {
3753 cancel_delayed_work_sync(&adapter
->work
);
3754 adapter
->flags
&= ~BE_FLAGS_WORKER_SCHEDULED
;
3758 static void be_cancel_err_detection(struct be_adapter
*adapter
)
3760 if (adapter
->flags
& BE_FLAGS_ERR_DETECTION_SCHEDULED
) {
3761 cancel_delayed_work_sync(&adapter
->be_err_detection_work
);
3762 adapter
->flags
&= ~BE_FLAGS_ERR_DETECTION_SCHEDULED
;
3766 #ifdef CONFIG_BE2NET_VXLAN
3767 static void be_disable_vxlan_offloads(struct be_adapter
*adapter
)
3769 struct net_device
*netdev
= adapter
->netdev
;
3771 if (adapter
->flags
& BE_FLAGS_VXLAN_OFFLOADS
)
3772 be_cmd_manage_iface(adapter
, adapter
->if_handle
,
3773 OP_CONVERT_TUNNEL_TO_NORMAL
);
3775 if (adapter
->vxlan_port
)
3776 be_cmd_set_vxlan_port(adapter
, 0);
3778 adapter
->flags
&= ~BE_FLAGS_VXLAN_OFFLOADS
;
3779 adapter
->vxlan_port
= 0;
3781 netdev
->hw_enc_features
= 0;
3782 netdev
->hw_features
&= ~(NETIF_F_GSO_UDP_TUNNEL
);
3783 netdev
->features
&= ~(NETIF_F_GSO_UDP_TUNNEL
);
3787 static u16
be_calculate_vf_qs(struct be_adapter
*adapter
, u16 num_vfs
)
3789 struct be_resources res
= adapter
->pool_res
;
3792 /* Distribute the queue resources equally among the PF and it's VFs
3793 * Do not distribute queue resources in multi-channel configuration.
3795 if (num_vfs
&& !be_is_mc(adapter
)) {
3796 /* If number of VFs requested is 8 less than max supported,
3797 * assign 8 queue pairs to the PF and divide the remaining
3798 * resources evenly among the VFs
3800 if (num_vfs
< (be_max_vfs(adapter
) - 8))
3801 num_vf_qs
= (res
.max_rss_qs
- 8) / num_vfs
;
3803 num_vf_qs
= res
.max_rss_qs
/ num_vfs
;
3805 /* Skyhawk-R chip supports only MAX_RSS_IFACES RSS capable
3806 * interfaces per port. Provide RSS on VFs, only if number
3807 * of VFs requested is less than MAX_RSS_IFACES limit.
3809 if (num_vfs
>= MAX_RSS_IFACES
)
3815 static int be_clear(struct be_adapter
*adapter
)
3817 struct pci_dev
*pdev
= adapter
->pdev
;
3820 be_cancel_worker(adapter
);
3822 if (sriov_enabled(adapter
))
3823 be_vf_clear(adapter
);
3825 /* Re-configure FW to distribute resources evenly across max-supported
3826 * number of VFs, only when VFs are not already enabled.
3828 if (skyhawk_chip(adapter
) && be_physfn(adapter
) &&
3829 !pci_vfs_assigned(pdev
)) {
3830 num_vf_qs
= be_calculate_vf_qs(adapter
,
3831 pci_sriov_get_totalvfs(pdev
));
3832 be_cmd_set_sriov_config(adapter
, adapter
->pool_res
,
3833 pci_sriov_get_totalvfs(pdev
),
3837 #ifdef CONFIG_BE2NET_VXLAN
3838 be_disable_vxlan_offloads(adapter
);
3840 kfree(adapter
->pmac_id
);
3841 adapter
->pmac_id
= NULL
;
3843 be_cmd_if_destroy(adapter
, adapter
->if_handle
, 0);
3845 be_clear_queues(adapter
);
3847 be_msix_disable(adapter
);
3848 adapter
->flags
&= ~BE_FLAGS_SETUP_DONE
;
3852 static int be_vfs_if_create(struct be_adapter
*adapter
)
3854 struct be_resources res
= {0};
3855 u32 cap_flags
, en_flags
, vf
;
3856 struct be_vf_cfg
*vf_cfg
;
3859 /* If a FW profile exists, then cap_flags are updated */
3860 cap_flags
= BE_IF_FLAGS_UNTAGGED
| BE_IF_FLAGS_BROADCAST
|
3861 BE_IF_FLAGS_MULTICAST
| BE_IF_FLAGS_PASS_L3L4_ERRORS
;
3863 for_all_vfs(adapter
, vf_cfg
, vf
) {
3864 if (!BE3_chip(adapter
)) {
3865 status
= be_cmd_get_profile_config(adapter
, &res
,
3869 cap_flags
= res
.if_cap_flags
;
3870 /* Prevent VFs from enabling VLAN promiscuous
3873 cap_flags
&= ~BE_IF_FLAGS_VLAN_PROMISCUOUS
;
3877 en_flags
= cap_flags
& (BE_IF_FLAGS_UNTAGGED
|
3878 BE_IF_FLAGS_BROADCAST
|
3879 BE_IF_FLAGS_MULTICAST
|
3880 BE_IF_FLAGS_PASS_L3L4_ERRORS
);
3881 status
= be_cmd_if_create(adapter
, cap_flags
, en_flags
,
3882 &vf_cfg
->if_handle
, vf
+ 1);
3890 static int be_vf_setup_init(struct be_adapter
*adapter
)
3892 struct be_vf_cfg
*vf_cfg
;
3895 adapter
->vf_cfg
= kcalloc(adapter
->num_vfs
, sizeof(*vf_cfg
),
3897 if (!adapter
->vf_cfg
)
3900 for_all_vfs(adapter
, vf_cfg
, vf
) {
3901 vf_cfg
->if_handle
= -1;
3902 vf_cfg
->pmac_id
= -1;
3907 static int be_vf_setup(struct be_adapter
*adapter
)
3909 struct device
*dev
= &adapter
->pdev
->dev
;
3910 struct be_vf_cfg
*vf_cfg
;
3911 int status
, old_vfs
, vf
;
3914 old_vfs
= pci_num_vf(adapter
->pdev
);
3916 status
= be_vf_setup_init(adapter
);
3921 for_all_vfs(adapter
, vf_cfg
, vf
) {
3922 status
= be_cmd_get_if_id(adapter
, vf_cfg
, vf
);
3927 status
= be_vfs_mac_query(adapter
);
3931 status
= be_vfs_if_create(adapter
);
3935 status
= be_vf_eth_addr_config(adapter
);
3940 for_all_vfs(adapter
, vf_cfg
, vf
) {
3941 /* Allow VFs to programs MAC/VLAN filters */
3942 status
= be_cmd_get_fn_privileges(adapter
, &vf_cfg
->privileges
,
3944 if (!status
&& !(vf_cfg
->privileges
& BE_PRIV_FILTMGMT
)) {
3945 status
= be_cmd_set_fn_privileges(adapter
,
3946 vf_cfg
->privileges
|
3950 vf_cfg
->privileges
|= BE_PRIV_FILTMGMT
;
3951 dev_info(dev
, "VF%d has FILTMGMT privilege\n",
3956 /* Allow full available bandwidth */
3958 be_cmd_config_qos(adapter
, 0, 0, vf
+ 1);
3960 status
= be_cmd_get_hsw_config(adapter
, NULL
, vf
+ 1,
3961 vf_cfg
->if_handle
, NULL
,
3964 vf_cfg
->spoofchk
= spoofchk
;
3967 be_cmd_enable_vf(adapter
, vf
+ 1);
3968 be_cmd_set_logical_link_config(adapter
,
3969 IFLA_VF_LINK_STATE_AUTO
,
3975 status
= pci_enable_sriov(adapter
->pdev
, adapter
->num_vfs
);
3977 dev_err(dev
, "SRIOV enable failed\n");
3978 adapter
->num_vfs
= 0;
3983 adapter
->flags
|= BE_FLAGS_SRIOV_ENABLED
;
3986 dev_err(dev
, "VF setup failed\n");
3987 be_vf_clear(adapter
);
3991 /* Converting function_mode bits on BE3 to SH mc_type enums */
3993 static u8
be_convert_mc_type(u32 function_mode
)
3995 if (function_mode
& VNIC_MODE
&& function_mode
& QNQ_MODE
)
3997 else if (function_mode
& QNQ_MODE
)
3999 else if (function_mode
& VNIC_MODE
)
4001 else if (function_mode
& UMC_ENABLED
)
4007 /* On BE2/BE3 FW does not suggest the supported limits */
4008 static void BEx_get_resources(struct be_adapter
*adapter
,
4009 struct be_resources
*res
)
4011 bool use_sriov
= adapter
->num_vfs
? 1 : 0;
4013 if (be_physfn(adapter
))
4014 res
->max_uc_mac
= BE_UC_PMAC_COUNT
;
4016 res
->max_uc_mac
= BE_VF_UC_PMAC_COUNT
;
4018 adapter
->mc_type
= be_convert_mc_type(adapter
->function_mode
);
4020 if (be_is_mc(adapter
)) {
4021 /* Assuming that there are 4 channels per port,
4022 * when multi-channel is enabled
4024 if (be_is_qnq_mode(adapter
))
4025 res
->max_vlans
= BE_NUM_VLANS_SUPPORTED
/8;
4027 /* In a non-qnq multichannel mode, the pvid
4028 * takes up one vlan entry
4030 res
->max_vlans
= (BE_NUM_VLANS_SUPPORTED
/ 4) - 1;
4032 res
->max_vlans
= BE_NUM_VLANS_SUPPORTED
;
4035 res
->max_mcast_mac
= BE_MAX_MC
;
4037 /* 1) For BE3 1Gb ports, FW does not support multiple TXQs
4038 * 2) Create multiple TX rings on a BE3-R multi-channel interface
4039 * *only* if it is RSS-capable.
4041 if (BE2_chip(adapter
) || use_sriov
|| (adapter
->port_num
> 1) ||
4042 be_virtfn(adapter
) ||
4043 (be_is_mc(adapter
) &&
4044 !(adapter
->function_caps
& BE_FUNCTION_CAPS_RSS
))) {
4046 } else if (adapter
->function_caps
& BE_FUNCTION_CAPS_SUPER_NIC
) {
4047 struct be_resources super_nic_res
= {0};
4049 /* On a SuperNIC profile, the driver needs to use the
4050 * GET_PROFILE_CONFIG cmd to query the per-function TXQ limits
4052 be_cmd_get_profile_config(adapter
, &super_nic_res
,
4053 RESOURCE_LIMITS
, 0);
4054 /* Some old versions of BE3 FW don't report max_tx_qs value */
4055 res
->max_tx_qs
= super_nic_res
.max_tx_qs
? : BE3_MAX_TX_QS
;
4057 res
->max_tx_qs
= BE3_MAX_TX_QS
;
4060 if ((adapter
->function_caps
& BE_FUNCTION_CAPS_RSS
) &&
4061 !use_sriov
&& be_physfn(adapter
))
4062 res
->max_rss_qs
= (adapter
->be3_native
) ?
4063 BE3_MAX_RSS_QS
: BE2_MAX_RSS_QS
;
4064 res
->max_rx_qs
= res
->max_rss_qs
+ 1;
4066 if (be_physfn(adapter
))
4067 res
->max_evt_qs
= (be_max_vfs(adapter
) > 0) ?
4068 BE3_SRIOV_MAX_EVT_QS
: BE3_MAX_EVT_QS
;
4070 res
->max_evt_qs
= 1;
4072 res
->if_cap_flags
= BE_IF_CAP_FLAGS_WANT
;
4073 res
->if_cap_flags
&= ~BE_IF_FLAGS_DEFQ_RSS
;
4074 if (!(adapter
->function_caps
& BE_FUNCTION_CAPS_RSS
))
4075 res
->if_cap_flags
&= ~BE_IF_FLAGS_RSS
;
4078 static void be_setup_init(struct be_adapter
*adapter
)
4080 adapter
->vlan_prio_bmap
= 0xff;
4081 adapter
->phy
.link_speed
= -1;
4082 adapter
->if_handle
= -1;
4083 adapter
->be3_native
= false;
4084 adapter
->if_flags
= 0;
4085 if (be_physfn(adapter
))
4086 adapter
->cmd_privileges
= MAX_PRIVILEGES
;
4088 adapter
->cmd_privileges
= MIN_PRIVILEGES
;
4091 static int be_get_sriov_config(struct be_adapter
*adapter
)
4093 struct be_resources res
= {0};
4094 int max_vfs
, old_vfs
;
4096 be_cmd_get_profile_config(adapter
, &res
, RESOURCE_LIMITS
, 0);
4098 /* Some old versions of BE3 FW don't report max_vfs value */
4099 if (BE3_chip(adapter
) && !res
.max_vfs
) {
4100 max_vfs
= pci_sriov_get_totalvfs(adapter
->pdev
);
4101 res
.max_vfs
= max_vfs
> 0 ? min(MAX_VFS
, max_vfs
) : 0;
4104 adapter
->pool_res
= res
;
4106 /* If during previous unload of the driver, the VFs were not disabled,
4107 * then we cannot rely on the PF POOL limits for the TotalVFs value.
4108 * Instead use the TotalVFs value stored in the pci-dev struct.
4110 old_vfs
= pci_num_vf(adapter
->pdev
);
4112 dev_info(&adapter
->pdev
->dev
, "%d VFs are already enabled\n",
4115 adapter
->pool_res
.max_vfs
=
4116 pci_sriov_get_totalvfs(adapter
->pdev
);
4117 adapter
->num_vfs
= old_vfs
;
4123 static void be_alloc_sriov_res(struct be_adapter
*adapter
)
4125 int old_vfs
= pci_num_vf(adapter
->pdev
);
4129 be_get_sriov_config(adapter
);
4132 pci_sriov_set_totalvfs(adapter
->pdev
, be_max_vfs(adapter
));
4134 /* When the HW is in SRIOV capable configuration, the PF-pool
4135 * resources are given to PF during driver load, if there are no
4136 * old VFs. This facility is not available in BE3 FW.
4137 * Also, this is done by FW in Lancer chip.
4139 if (skyhawk_chip(adapter
) && be_max_vfs(adapter
) && !old_vfs
) {
4140 num_vf_qs
= be_calculate_vf_qs(adapter
, 0);
4141 status
= be_cmd_set_sriov_config(adapter
, adapter
->pool_res
, 0,
4144 dev_err(&adapter
->pdev
->dev
,
4145 "Failed to optimize SRIOV resources\n");
4149 static int be_get_resources(struct be_adapter
*adapter
)
4151 struct device
*dev
= &adapter
->pdev
->dev
;
4152 struct be_resources res
= {0};
4155 if (BEx_chip(adapter
)) {
4156 BEx_get_resources(adapter
, &res
);
4160 /* For Lancer, SH etc read per-function resource limits from FW.
4161 * GET_FUNC_CONFIG returns per function guaranteed limits.
4162 * GET_PROFILE_CONFIG returns PCI-E related limits PF-pool limits
4164 if (!BEx_chip(adapter
)) {
4165 status
= be_cmd_get_func_config(adapter
, &res
);
4169 /* If a deafault RXQ must be created, we'll use up one RSSQ*/
4170 if (res
.max_rss_qs
&& res
.max_rss_qs
== res
.max_rx_qs
&&
4171 !(res
.if_cap_flags
& BE_IF_FLAGS_DEFQ_RSS
))
4172 res
.max_rss_qs
-= 1;
4174 /* If RoCE may be enabled stash away half the EQs for RoCE */
4175 if (be_roce_supported(adapter
))
4176 res
.max_evt_qs
/= 2;
4180 /* If FW supports RSS default queue, then skip creating non-RSS
4181 * queue for non-IP traffic.
4183 adapter
->need_def_rxq
= (be_if_cap_flags(adapter
) &
4184 BE_IF_FLAGS_DEFQ_RSS
) ? 0 : 1;
4186 dev_info(dev
, "Max: txqs %d, rxqs %d, rss %d, eqs %d, vfs %d\n",
4187 be_max_txqs(adapter
), be_max_rxqs(adapter
),
4188 be_max_rss(adapter
), be_max_eqs(adapter
),
4189 be_max_vfs(adapter
));
4190 dev_info(dev
, "Max: uc-macs %d, mc-macs %d, vlans %d\n",
4191 be_max_uc(adapter
), be_max_mc(adapter
),
4192 be_max_vlans(adapter
));
4194 /* Sanitize cfg_num_qs based on HW and platform limits */
4195 adapter
->cfg_num_qs
= min_t(u16
, netif_get_num_default_rss_queues(),
4196 be_max_qs(adapter
));
4200 static int be_get_config(struct be_adapter
*adapter
)
4205 status
= be_cmd_get_cntl_attributes(adapter
);
4209 status
= be_cmd_query_fw_cfg(adapter
);
4213 if (!lancer_chip(adapter
) && be_physfn(adapter
))
4214 be_cmd_get_fat_dump_len(adapter
, &adapter
->fat_dump_len
);
4216 if (BEx_chip(adapter
)) {
4217 level
= be_cmd_get_fw_log_level(adapter
);
4218 adapter
->msg_enable
=
4219 level
<= FW_LOG_LEVEL_DEFAULT
? NETIF_MSG_HW
: 0;
4222 be_cmd_get_acpi_wol_cap(adapter
);
4224 be_cmd_query_port_name(adapter
);
4226 if (be_physfn(adapter
)) {
4227 status
= be_cmd_get_active_profile(adapter
, &profile_id
);
4229 dev_info(&adapter
->pdev
->dev
,
4230 "Using profile 0x%x\n", profile_id
);
4233 status
= be_get_resources(adapter
);
4237 adapter
->pmac_id
= kcalloc(be_max_uc(adapter
),
4238 sizeof(*adapter
->pmac_id
), GFP_KERNEL
);
4239 if (!adapter
->pmac_id
)
4245 static int be_mac_setup(struct be_adapter
*adapter
)
4250 if (is_zero_ether_addr(adapter
->netdev
->dev_addr
)) {
4251 status
= be_cmd_get_perm_mac(adapter
, mac
);
4255 memcpy(adapter
->netdev
->dev_addr
, mac
, ETH_ALEN
);
4256 memcpy(adapter
->netdev
->perm_addr
, mac
, ETH_ALEN
);
4262 static void be_schedule_worker(struct be_adapter
*adapter
)
4264 schedule_delayed_work(&adapter
->work
, msecs_to_jiffies(1000));
4265 adapter
->flags
|= BE_FLAGS_WORKER_SCHEDULED
;
4268 static void be_schedule_err_detection(struct be_adapter
*adapter
)
4270 schedule_delayed_work(&adapter
->be_err_detection_work
,
4271 msecs_to_jiffies(1000));
4272 adapter
->flags
|= BE_FLAGS_ERR_DETECTION_SCHEDULED
;
4275 static int be_setup_queues(struct be_adapter
*adapter
)
4277 struct net_device
*netdev
= adapter
->netdev
;
4280 status
= be_evt_queues_create(adapter
);
4284 status
= be_tx_qs_create(adapter
);
4288 status
= be_rx_cqs_create(adapter
);
4292 status
= be_mcc_queues_create(adapter
);
4296 status
= netif_set_real_num_rx_queues(netdev
, adapter
->num_rx_qs
);
4300 status
= netif_set_real_num_tx_queues(netdev
, adapter
->num_tx_qs
);
4306 dev_err(&adapter
->pdev
->dev
, "queue_setup failed\n");
4310 int be_update_queues(struct be_adapter
*adapter
)
4312 struct net_device
*netdev
= adapter
->netdev
;
4315 if (netif_running(netdev
))
4318 be_cancel_worker(adapter
);
4320 /* If any vectors have been shared with RoCE we cannot re-program
4323 if (!adapter
->num_msix_roce_vec
)
4324 be_msix_disable(adapter
);
4326 be_clear_queues(adapter
);
4328 if (!msix_enabled(adapter
)) {
4329 status
= be_msix_enable(adapter
);
4334 status
= be_setup_queues(adapter
);
4338 be_schedule_worker(adapter
);
4340 if (netif_running(netdev
))
4341 status
= be_open(netdev
);
4346 static inline int fw_major_num(const char *fw_ver
)
4348 int fw_major
= 0, i
;
4350 i
= sscanf(fw_ver
, "%d.", &fw_major
);
4357 /* If any VFs are already enabled don't FLR the PF */
4358 static bool be_reset_required(struct be_adapter
*adapter
)
4360 return pci_num_vf(adapter
->pdev
) ? false : true;
4363 /* Wait for the FW to be ready and perform the required initialization */
4364 static int be_func_init(struct be_adapter
*adapter
)
4368 status
= be_fw_wait_ready(adapter
);
4372 if (be_reset_required(adapter
)) {
4373 status
= be_cmd_reset_function(adapter
);
4377 /* Wait for interrupts to quiesce after an FLR */
4380 /* We can clear all errors when function reset succeeds */
4381 be_clear_error(adapter
, BE_CLEAR_ALL
);
4384 /* Tell FW we're ready to fire cmds */
4385 status
= be_cmd_fw_init(adapter
);
4389 /* Allow interrupts for other ULPs running on NIC function */
4390 be_intr_set(adapter
, true);
4395 static int be_setup(struct be_adapter
*adapter
)
4397 struct device
*dev
= &adapter
->pdev
->dev
;
4401 status
= be_func_init(adapter
);
4405 be_setup_init(adapter
);
4407 if (!lancer_chip(adapter
))
4408 be_cmd_req_native_mode(adapter
);
4410 /* invoke this cmd first to get pf_num and vf_num which are needed
4411 * for issuing profile related cmds
4413 if (!BEx_chip(adapter
)) {
4414 status
= be_cmd_get_func_config(adapter
, NULL
);
4419 if (!BE2_chip(adapter
) && be_physfn(adapter
))
4420 be_alloc_sriov_res(adapter
);
4422 status
= be_get_config(adapter
);
4426 status
= be_msix_enable(adapter
);
4430 /* will enable all the needed filter flags in be_open() */
4431 en_flags
= BE_IF_FLAGS_RSS
| BE_IF_FLAGS_DEFQ_RSS
;
4432 en_flags
= en_flags
& be_if_cap_flags(adapter
);
4433 status
= be_cmd_if_create(adapter
, be_if_cap_flags(adapter
), en_flags
,
4434 &adapter
->if_handle
, 0);
4438 /* Updating real_num_tx/rx_queues() requires rtnl_lock() */
4440 status
= be_setup_queues(adapter
);
4445 be_cmd_get_fn_privileges(adapter
, &adapter
->cmd_privileges
, 0);
4447 status
= be_mac_setup(adapter
);
4451 be_cmd_get_fw_ver(adapter
);
4452 dev_info(dev
, "FW version is %s\n", adapter
->fw_ver
);
4454 if (BE2_chip(adapter
) && fw_major_num(adapter
->fw_ver
) < 4) {
4455 dev_err(dev
, "Firmware on card is old(%s), IRQs may not work",
4457 dev_err(dev
, "Please upgrade firmware to version >= 4.0\n");
4460 status
= be_cmd_set_flow_control(adapter
, adapter
->tx_fc
,
4463 be_cmd_get_flow_control(adapter
, &adapter
->tx_fc
,
4466 dev_info(&adapter
->pdev
->dev
, "HW Flow control - TX:%d RX:%d\n",
4467 adapter
->tx_fc
, adapter
->rx_fc
);
4469 if (be_physfn(adapter
))
4470 be_cmd_set_logical_link_config(adapter
,
4471 IFLA_VF_LINK_STATE_AUTO
, 0);
4473 if (adapter
->num_vfs
)
4474 be_vf_setup(adapter
);
4476 status
= be_cmd_get_phy_info(adapter
);
4477 if (!status
&& be_pause_supported(adapter
))
4478 adapter
->phy
.fc_autoneg
= 1;
4480 be_schedule_worker(adapter
);
4481 adapter
->flags
|= BE_FLAGS_SETUP_DONE
;
4488 #ifdef CONFIG_NET_POLL_CONTROLLER
4489 static void be_netpoll(struct net_device
*netdev
)
4491 struct be_adapter
*adapter
= netdev_priv(netdev
);
4492 struct be_eq_obj
*eqo
;
4495 for_all_evt_queues(adapter
, eqo
, i
) {
4496 be_eq_notify(eqo
->adapter
, eqo
->q
.id
, false, true, 0, 0);
4497 napi_schedule(&eqo
->napi
);
4502 int be_load_fw(struct be_adapter
*adapter
, u8
*fw_file
)
4504 const struct firmware
*fw
;
4507 if (!netif_running(adapter
->netdev
)) {
4508 dev_err(&adapter
->pdev
->dev
,
4509 "Firmware load not allowed (interface is down)\n");
4513 status
= request_firmware(&fw
, fw_file
, &adapter
->pdev
->dev
);
4517 dev_info(&adapter
->pdev
->dev
, "Flashing firmware file %s\n", fw_file
);
4519 if (lancer_chip(adapter
))
4520 status
= lancer_fw_download(adapter
, fw
);
4522 status
= be_fw_download(adapter
, fw
);
4525 be_cmd_get_fw_ver(adapter
);
4528 release_firmware(fw
);
4532 static int be_ndo_bridge_setlink(struct net_device
*dev
, struct nlmsghdr
*nlh
,
4535 struct be_adapter
*adapter
= netdev_priv(dev
);
4536 struct nlattr
*attr
, *br_spec
;
4541 if (!sriov_enabled(adapter
))
4544 br_spec
= nlmsg_find_attr(nlh
, sizeof(struct ifinfomsg
), IFLA_AF_SPEC
);
4548 nla_for_each_nested(attr
, br_spec
, rem
) {
4549 if (nla_type(attr
) != IFLA_BRIDGE_MODE
)
4552 if (nla_len(attr
) < sizeof(mode
))
4555 mode
= nla_get_u16(attr
);
4556 if (BE3_chip(adapter
) && mode
== BRIDGE_MODE_VEPA
)
4559 if (mode
!= BRIDGE_MODE_VEPA
&& mode
!= BRIDGE_MODE_VEB
)
4562 status
= be_cmd_set_hsw_config(adapter
, 0, 0,
4564 mode
== BRIDGE_MODE_VEPA
?
4565 PORT_FWD_TYPE_VEPA
:
4566 PORT_FWD_TYPE_VEB
, 0);
4570 dev_info(&adapter
->pdev
->dev
, "enabled switch mode: %s\n",
4571 mode
== BRIDGE_MODE_VEPA
? "VEPA" : "VEB");
4576 dev_err(&adapter
->pdev
->dev
, "Failed to set switch mode %s\n",
4577 mode
== BRIDGE_MODE_VEPA
? "VEPA" : "VEB");
4582 static int be_ndo_bridge_getlink(struct sk_buff
*skb
, u32 pid
, u32 seq
,
4583 struct net_device
*dev
, u32 filter_mask
,
4586 struct be_adapter
*adapter
= netdev_priv(dev
);
4590 /* BE and Lancer chips support VEB mode only */
4591 if (BEx_chip(adapter
) || lancer_chip(adapter
)) {
4592 hsw_mode
= PORT_FWD_TYPE_VEB
;
4594 status
= be_cmd_get_hsw_config(adapter
, NULL
, 0,
4595 adapter
->if_handle
, &hsw_mode
,
4600 if (hsw_mode
== PORT_FWD_TYPE_PASSTHRU
)
4604 return ndo_dflt_bridge_getlink(skb
, pid
, seq
, dev
,
4605 hsw_mode
== PORT_FWD_TYPE_VEPA
?
4606 BRIDGE_MODE_VEPA
: BRIDGE_MODE_VEB
,
4607 0, 0, nlflags
, filter_mask
, NULL
);
4610 #ifdef CONFIG_BE2NET_VXLAN
4611 /* VxLAN offload Notes:
4613 * The stack defines tunnel offload flags (hw_enc_features) for IP and doesn't
4614 * distinguish various types of transports (VxLAN, GRE, NVGRE ..). So, offload
4615 * is expected to work across all types of IP tunnels once exported. Skyhawk
4616 * supports offloads for either VxLAN or NVGRE, exclusively. So we export VxLAN
4617 * offloads in hw_enc_features only when a VxLAN port is added. If other (non
4618 * VxLAN) tunnels are configured while VxLAN offloads are enabled, offloads for
4619 * those other tunnels are unexported on the fly through ndo_features_check().
4621 * Skyhawk supports VxLAN offloads only for one UDP dport. So, if the stack
4622 * adds more than one port, disable offloads and don't re-enable them again
4623 * until after all the tunnels are removed.
4625 static void be_add_vxlan_port(struct net_device
*netdev
, sa_family_t sa_family
,
4628 struct be_adapter
*adapter
= netdev_priv(netdev
);
4629 struct device
*dev
= &adapter
->pdev
->dev
;
4632 if (lancer_chip(adapter
) || BEx_chip(adapter
) || be_is_mc(adapter
))
4635 if (adapter
->vxlan_port
== port
&& adapter
->vxlan_port_count
) {
4636 adapter
->vxlan_port_aliases
++;
4640 if (adapter
->flags
& BE_FLAGS_VXLAN_OFFLOADS
) {
4642 "Only one UDP port supported for VxLAN offloads\n");
4643 dev_info(dev
, "Disabling VxLAN offloads\n");
4644 adapter
->vxlan_port_count
++;
4648 if (adapter
->vxlan_port_count
++ >= 1)
4651 status
= be_cmd_manage_iface(adapter
, adapter
->if_handle
,
4652 OP_CONVERT_NORMAL_TO_TUNNEL
);
4654 dev_warn(dev
, "Failed to convert normal interface to tunnel\n");
4658 status
= be_cmd_set_vxlan_port(adapter
, port
);
4660 dev_warn(dev
, "Failed to add VxLAN port\n");
4663 adapter
->flags
|= BE_FLAGS_VXLAN_OFFLOADS
;
4664 adapter
->vxlan_port
= port
;
4666 netdev
->hw_enc_features
|= NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
|
4667 NETIF_F_TSO
| NETIF_F_TSO6
|
4668 NETIF_F_GSO_UDP_TUNNEL
;
4669 netdev
->hw_features
|= NETIF_F_GSO_UDP_TUNNEL
;
4670 netdev
->features
|= NETIF_F_GSO_UDP_TUNNEL
;
4672 dev_info(dev
, "Enabled VxLAN offloads for UDP port %d\n",
4676 be_disable_vxlan_offloads(adapter
);
4679 static void be_del_vxlan_port(struct net_device
*netdev
, sa_family_t sa_family
,
4682 struct be_adapter
*adapter
= netdev_priv(netdev
);
4684 if (lancer_chip(adapter
) || BEx_chip(adapter
) || be_is_mc(adapter
))
4687 if (adapter
->vxlan_port
!= port
)
4690 if (adapter
->vxlan_port_aliases
) {
4691 adapter
->vxlan_port_aliases
--;
4695 be_disable_vxlan_offloads(adapter
);
4697 dev_info(&adapter
->pdev
->dev
,
4698 "Disabled VxLAN offloads for UDP port %d\n",
4701 adapter
->vxlan_port_count
--;
4704 static netdev_features_t
be_features_check(struct sk_buff
*skb
,
4705 struct net_device
*dev
,
4706 netdev_features_t features
)
4708 struct be_adapter
*adapter
= netdev_priv(dev
);
4711 /* The code below restricts offload features for some tunneled packets.
4712 * Offload features for normal (non tunnel) packets are unchanged.
4714 if (!skb
->encapsulation
||
4715 !(adapter
->flags
& BE_FLAGS_VXLAN_OFFLOADS
))
4718 /* It's an encapsulated packet and VxLAN offloads are enabled. We
4719 * should disable tunnel offload features if it's not a VxLAN packet,
4720 * as tunnel offloads have been enabled only for VxLAN. This is done to
4721 * allow other tunneled traffic like GRE work fine while VxLAN
4722 * offloads are configured in Skyhawk-R.
4724 switch (vlan_get_protocol(skb
)) {
4725 case htons(ETH_P_IP
):
4726 l4_hdr
= ip_hdr(skb
)->protocol
;
4728 case htons(ETH_P_IPV6
):
4729 l4_hdr
= ipv6_hdr(skb
)->nexthdr
;
4735 if (l4_hdr
!= IPPROTO_UDP
||
4736 skb
->inner_protocol_type
!= ENCAP_TYPE_ETHER
||
4737 skb
->inner_protocol
!= htons(ETH_P_TEB
) ||
4738 skb_inner_mac_header(skb
) - skb_transport_header(skb
) !=
4739 sizeof(struct udphdr
) + sizeof(struct vxlanhdr
))
4740 return features
& ~(NETIF_F_CSUM_MASK
| NETIF_F_GSO_MASK
);
4746 static int be_get_phys_port_id(struct net_device
*dev
,
4747 struct netdev_phys_item_id
*ppid
)
4749 int i
, id_len
= CNTL_SERIAL_NUM_WORDS
* CNTL_SERIAL_NUM_WORD_SZ
+ 1;
4750 struct be_adapter
*adapter
= netdev_priv(dev
);
4753 if (MAX_PHYS_ITEM_ID_LEN
< id_len
)
4756 ppid
->id
[0] = adapter
->hba_port_num
+ 1;
4758 for (i
= CNTL_SERIAL_NUM_WORDS
- 1; i
>= 0;
4759 i
--, id
+= CNTL_SERIAL_NUM_WORD_SZ
)
4760 memcpy(id
, &adapter
->serial_num
[i
], CNTL_SERIAL_NUM_WORD_SZ
);
4762 ppid
->id_len
= id_len
;
4767 static const struct net_device_ops be_netdev_ops
= {
4768 .ndo_open
= be_open
,
4769 .ndo_stop
= be_close
,
4770 .ndo_start_xmit
= be_xmit
,
4771 .ndo_set_rx_mode
= be_set_rx_mode
,
4772 .ndo_set_mac_address
= be_mac_addr_set
,
4773 .ndo_change_mtu
= be_change_mtu
,
4774 .ndo_get_stats64
= be_get_stats64
,
4775 .ndo_validate_addr
= eth_validate_addr
,
4776 .ndo_vlan_rx_add_vid
= be_vlan_add_vid
,
4777 .ndo_vlan_rx_kill_vid
= be_vlan_rem_vid
,
4778 .ndo_set_vf_mac
= be_set_vf_mac
,
4779 .ndo_set_vf_vlan
= be_set_vf_vlan
,
4780 .ndo_set_vf_rate
= be_set_vf_tx_rate
,
4781 .ndo_get_vf_config
= be_get_vf_config
,
4782 .ndo_set_vf_link_state
= be_set_vf_link_state
,
4783 .ndo_set_vf_spoofchk
= be_set_vf_spoofchk
,
4784 #ifdef CONFIG_NET_POLL_CONTROLLER
4785 .ndo_poll_controller
= be_netpoll
,
4787 .ndo_bridge_setlink
= be_ndo_bridge_setlink
,
4788 .ndo_bridge_getlink
= be_ndo_bridge_getlink
,
4789 #ifdef CONFIG_NET_RX_BUSY_POLL
4790 .ndo_busy_poll
= be_busy_poll
,
4792 #ifdef CONFIG_BE2NET_VXLAN
4793 .ndo_add_vxlan_port
= be_add_vxlan_port
,
4794 .ndo_del_vxlan_port
= be_del_vxlan_port
,
4795 .ndo_features_check
= be_features_check
,
4797 .ndo_get_phys_port_id
= be_get_phys_port_id
,
4800 static void be_netdev_init(struct net_device
*netdev
)
4802 struct be_adapter
*adapter
= netdev_priv(netdev
);
4804 netdev
->hw_features
|= NETIF_F_SG
| NETIF_F_TSO
| NETIF_F_TSO6
|
4805 NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
| NETIF_F_RXCSUM
|
4806 NETIF_F_HW_VLAN_CTAG_TX
;
4807 if (be_multi_rxq(adapter
))
4808 netdev
->hw_features
|= NETIF_F_RXHASH
;
4810 netdev
->features
|= netdev
->hw_features
|
4811 NETIF_F_HW_VLAN_CTAG_RX
| NETIF_F_HW_VLAN_CTAG_FILTER
;
4813 netdev
->vlan_features
|= NETIF_F_SG
| NETIF_F_TSO
| NETIF_F_TSO6
|
4814 NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
;
4816 netdev
->priv_flags
|= IFF_UNICAST_FLT
;
4818 netdev
->flags
|= IFF_MULTICAST
;
4820 netif_set_gso_max_size(netdev
, 65535 - ETH_HLEN
);
4822 netdev
->netdev_ops
= &be_netdev_ops
;
4824 netdev
->ethtool_ops
= &be_ethtool_ops
;
4827 static void be_cleanup(struct be_adapter
*adapter
)
4829 struct net_device
*netdev
= adapter
->netdev
;
4832 netif_device_detach(netdev
);
4833 if (netif_running(netdev
))
4840 static int be_resume(struct be_adapter
*adapter
)
4842 struct net_device
*netdev
= adapter
->netdev
;
4845 status
= be_setup(adapter
);
4849 if (netif_running(netdev
)) {
4850 status
= be_open(netdev
);
4855 netif_device_attach(netdev
);
4860 static int be_err_recover(struct be_adapter
*adapter
)
4862 struct device
*dev
= &adapter
->pdev
->dev
;
4865 status
= be_resume(adapter
);
4869 dev_info(dev
, "Adapter recovery successful\n");
4872 if (be_physfn(adapter
))
4873 dev_err(dev
, "Adapter recovery failed\n");
4875 dev_err(dev
, "Re-trying adapter recovery\n");
4880 static void be_err_detection_task(struct work_struct
*work
)
4882 struct be_adapter
*adapter
=
4883 container_of(work
, struct be_adapter
,
4884 be_err_detection_work
.work
);
4887 be_detect_error(adapter
);
4889 if (be_check_error(adapter
, BE_ERROR_HW
)) {
4890 be_cleanup(adapter
);
4892 /* As of now error recovery support is in Lancer only */
4893 if (lancer_chip(adapter
))
4894 status
= be_err_recover(adapter
);
4897 /* Always attempt recovery on VFs */
4898 if (!status
|| be_virtfn(adapter
))
4899 be_schedule_err_detection(adapter
);
4902 static void be_log_sfp_info(struct be_adapter
*adapter
)
4906 status
= be_cmd_query_sfp_info(adapter
);
4908 dev_err(&adapter
->pdev
->dev
,
4909 "Unqualified SFP+ detected on %c from %s part no: %s",
4910 adapter
->port_name
, adapter
->phy
.vendor_name
,
4911 adapter
->phy
.vendor_pn
);
4913 adapter
->flags
&= ~BE_FLAGS_EVT_INCOMPATIBLE_SFP
;
4916 static void be_worker(struct work_struct
*work
)
4918 struct be_adapter
*adapter
=
4919 container_of(work
, struct be_adapter
, work
.work
);
4920 struct be_rx_obj
*rxo
;
4923 /* when interrupts are not yet enabled, just reap any pending
4926 if (!netif_running(adapter
->netdev
)) {
4928 be_process_mcc(adapter
);
4933 if (!adapter
->stats_cmd_sent
) {
4934 if (lancer_chip(adapter
))
4935 lancer_cmd_get_pport_stats(adapter
,
4936 &adapter
->stats_cmd
);
4938 be_cmd_get_stats(adapter
, &adapter
->stats_cmd
);
4941 if (be_physfn(adapter
) &&
4942 MODULO(adapter
->work_counter
, adapter
->be_get_temp_freq
) == 0)
4943 be_cmd_get_die_temperature(adapter
);
4945 for_all_rx_queues(adapter
, rxo
, i
) {
4946 /* Replenish RX-queues starved due to memory
4947 * allocation failures.
4949 if (rxo
->rx_post_starved
)
4950 be_post_rx_frags(rxo
, GFP_KERNEL
, MAX_RX_POST
);
4953 /* EQ-delay update for Skyhawk is done while notifying EQ */
4954 if (!skyhawk_chip(adapter
))
4955 be_eqd_update(adapter
, false);
4957 if (adapter
->flags
& BE_FLAGS_EVT_INCOMPATIBLE_SFP
)
4958 be_log_sfp_info(adapter
);
4961 adapter
->work_counter
++;
4962 schedule_delayed_work(&adapter
->work
, msecs_to_jiffies(1000));
4965 static void be_unmap_pci_bars(struct be_adapter
*adapter
)
4968 pci_iounmap(adapter
->pdev
, adapter
->csr
);
4970 pci_iounmap(adapter
->pdev
, adapter
->db
);
4973 static int db_bar(struct be_adapter
*adapter
)
4975 if (lancer_chip(adapter
) || be_virtfn(adapter
))
4981 static int be_roce_map_pci_bars(struct be_adapter
*adapter
)
4983 if (skyhawk_chip(adapter
)) {
4984 adapter
->roce_db
.size
= 4096;
4985 adapter
->roce_db
.io_addr
= pci_resource_start(adapter
->pdev
,
4987 adapter
->roce_db
.total_size
= pci_resource_len(adapter
->pdev
,
4993 static int be_map_pci_bars(struct be_adapter
*adapter
)
4995 struct pci_dev
*pdev
= adapter
->pdev
;
4999 pci_read_config_dword(adapter
->pdev
, SLI_INTF_REG_OFFSET
, &sli_intf
);
5000 adapter
->sli_family
= (sli_intf
& SLI_INTF_FAMILY_MASK
) >>
5001 SLI_INTF_FAMILY_SHIFT
;
5002 adapter
->virtfn
= (sli_intf
& SLI_INTF_FT_MASK
) ? 1 : 0;
5004 if (BEx_chip(adapter
) && be_physfn(adapter
)) {
5005 adapter
->csr
= pci_iomap(pdev
, 2, 0);
5010 addr
= pci_iomap(pdev
, db_bar(adapter
), 0);
5015 if (skyhawk_chip(adapter
) || BEx_chip(adapter
)) {
5016 if (be_physfn(adapter
)) {
5017 /* PCICFG is the 2nd BAR in BE2 */
5018 addr
= pci_iomap(pdev
, BE2_chip(adapter
) ? 1 : 0, 0);
5021 adapter
->pcicfg
= addr
;
5023 adapter
->pcicfg
= adapter
->db
+ SRIOV_VF_PCICFG_OFFSET
;
5027 be_roce_map_pci_bars(adapter
);
5031 dev_err(&pdev
->dev
, "Error in mapping PCI BARs\n");
5032 be_unmap_pci_bars(adapter
);
5036 static void be_drv_cleanup(struct be_adapter
*adapter
)
5038 struct be_dma_mem
*mem
= &adapter
->mbox_mem_alloced
;
5039 struct device
*dev
= &adapter
->pdev
->dev
;
5042 dma_free_coherent(dev
, mem
->size
, mem
->va
, mem
->dma
);
5044 mem
= &adapter
->rx_filter
;
5046 dma_free_coherent(dev
, mem
->size
, mem
->va
, mem
->dma
);
5048 mem
= &adapter
->stats_cmd
;
5050 dma_free_coherent(dev
, mem
->size
, mem
->va
, mem
->dma
);
5053 /* Allocate and initialize various fields in be_adapter struct */
5054 static int be_drv_init(struct be_adapter
*adapter
)
5056 struct be_dma_mem
*mbox_mem_alloc
= &adapter
->mbox_mem_alloced
;
5057 struct be_dma_mem
*mbox_mem_align
= &adapter
->mbox_mem
;
5058 struct be_dma_mem
*rx_filter
= &adapter
->rx_filter
;
5059 struct be_dma_mem
*stats_cmd
= &adapter
->stats_cmd
;
5060 struct device
*dev
= &adapter
->pdev
->dev
;
5063 mbox_mem_alloc
->size
= sizeof(struct be_mcc_mailbox
) + 16;
5064 mbox_mem_alloc
->va
= dma_zalloc_coherent(dev
, mbox_mem_alloc
->size
,
5065 &mbox_mem_alloc
->dma
,
5067 if (!mbox_mem_alloc
->va
)
5070 mbox_mem_align
->size
= sizeof(struct be_mcc_mailbox
);
5071 mbox_mem_align
->va
= PTR_ALIGN(mbox_mem_alloc
->va
, 16);
5072 mbox_mem_align
->dma
= PTR_ALIGN(mbox_mem_alloc
->dma
, 16);
5074 rx_filter
->size
= sizeof(struct be_cmd_req_rx_filter
);
5075 rx_filter
->va
= dma_zalloc_coherent(dev
, rx_filter
->size
,
5076 &rx_filter
->dma
, GFP_KERNEL
);
5077 if (!rx_filter
->va
) {
5082 if (lancer_chip(adapter
))
5083 stats_cmd
->size
= sizeof(struct lancer_cmd_req_pport_stats
);
5084 else if (BE2_chip(adapter
))
5085 stats_cmd
->size
= sizeof(struct be_cmd_req_get_stats_v0
);
5086 else if (BE3_chip(adapter
))
5087 stats_cmd
->size
= sizeof(struct be_cmd_req_get_stats_v1
);
5089 stats_cmd
->size
= sizeof(struct be_cmd_req_get_stats_v2
);
5090 stats_cmd
->va
= dma_zalloc_coherent(dev
, stats_cmd
->size
,
5091 &stats_cmd
->dma
, GFP_KERNEL
);
5092 if (!stats_cmd
->va
) {
5094 goto free_rx_filter
;
5097 mutex_init(&adapter
->mbox_lock
);
5098 spin_lock_init(&adapter
->mcc_lock
);
5099 spin_lock_init(&adapter
->mcc_cq_lock
);
5100 init_completion(&adapter
->et_cmd_compl
);
5102 pci_save_state(adapter
->pdev
);
5104 INIT_DELAYED_WORK(&adapter
->work
, be_worker
);
5105 INIT_DELAYED_WORK(&adapter
->be_err_detection_work
,
5106 be_err_detection_task
);
5108 adapter
->rx_fc
= true;
5109 adapter
->tx_fc
= true;
5111 /* Must be a power of 2 or else MODULO will BUG_ON */
5112 adapter
->be_get_temp_freq
= 64;
5117 dma_free_coherent(dev
, rx_filter
->size
, rx_filter
->va
, rx_filter
->dma
);
5119 dma_free_coherent(dev
, mbox_mem_alloc
->size
, mbox_mem_alloc
->va
,
5120 mbox_mem_alloc
->dma
);
5124 static void be_remove(struct pci_dev
*pdev
)
5126 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5131 be_roce_dev_remove(adapter
);
5132 be_intr_set(adapter
, false);
5134 be_cancel_err_detection(adapter
);
5136 unregister_netdev(adapter
->netdev
);
5140 /* tell fw we're done with firing cmds */
5141 be_cmd_fw_clean(adapter
);
5143 be_unmap_pci_bars(adapter
);
5144 be_drv_cleanup(adapter
);
5146 pci_disable_pcie_error_reporting(pdev
);
5148 pci_release_regions(pdev
);
5149 pci_disable_device(pdev
);
5151 free_netdev(adapter
->netdev
);
5154 static ssize_t
be_hwmon_show_temp(struct device
*dev
,
5155 struct device_attribute
*dev_attr
,
5158 struct be_adapter
*adapter
= dev_get_drvdata(dev
);
5160 /* Unit: millidegree Celsius */
5161 if (adapter
->hwmon_info
.be_on_die_temp
== BE_INVALID_DIE_TEMP
)
5164 return sprintf(buf
, "%u\n",
5165 adapter
->hwmon_info
.be_on_die_temp
* 1000);
5168 static SENSOR_DEVICE_ATTR(temp1_input
, S_IRUGO
,
5169 be_hwmon_show_temp
, NULL
, 1);
5171 static struct attribute
*be_hwmon_attrs
[] = {
5172 &sensor_dev_attr_temp1_input
.dev_attr
.attr
,
5176 ATTRIBUTE_GROUPS(be_hwmon
);
5178 static char *mc_name(struct be_adapter
*adapter
)
5180 char *str
= ""; /* default */
5182 switch (adapter
->mc_type
) {
5208 static inline char *func_name(struct be_adapter
*adapter
)
5210 return be_physfn(adapter
) ? "PF" : "VF";
5213 static inline char *nic_name(struct pci_dev
*pdev
)
5215 switch (pdev
->device
) {
5222 return OC_NAME_LANCER
;
5233 static int be_probe(struct pci_dev
*pdev
, const struct pci_device_id
*pdev_id
)
5235 struct be_adapter
*adapter
;
5236 struct net_device
*netdev
;
5239 dev_info(&pdev
->dev
, "%s version is %s\n", DRV_NAME
, DRV_VER
);
5241 status
= pci_enable_device(pdev
);
5245 status
= pci_request_regions(pdev
, DRV_NAME
);
5248 pci_set_master(pdev
);
5250 netdev
= alloc_etherdev_mqs(sizeof(*adapter
), MAX_TX_QS
, MAX_RX_QS
);
5255 adapter
= netdev_priv(netdev
);
5256 adapter
->pdev
= pdev
;
5257 pci_set_drvdata(pdev
, adapter
);
5258 adapter
->netdev
= netdev
;
5259 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
5261 status
= dma_set_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(64));
5263 netdev
->features
|= NETIF_F_HIGHDMA
;
5265 status
= dma_set_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(32));
5267 dev_err(&pdev
->dev
, "Could not set PCI DMA Mask\n");
5272 status
= pci_enable_pcie_error_reporting(pdev
);
5274 dev_info(&pdev
->dev
, "PCIe error reporting enabled\n");
5276 status
= be_map_pci_bars(adapter
);
5280 status
= be_drv_init(adapter
);
5284 status
= be_setup(adapter
);
5288 be_netdev_init(netdev
);
5289 status
= register_netdev(netdev
);
5293 be_roce_dev_add(adapter
);
5295 be_schedule_err_detection(adapter
);
5297 /* On Die temperature not supported for VF. */
5298 if (be_physfn(adapter
) && IS_ENABLED(CONFIG_BE2NET_HWMON
)) {
5299 adapter
->hwmon_info
.hwmon_dev
=
5300 devm_hwmon_device_register_with_groups(&pdev
->dev
,
5304 adapter
->hwmon_info
.be_on_die_temp
= BE_INVALID_DIE_TEMP
;
5307 dev_info(&pdev
->dev
, "%s: %s %s port %c\n", nic_name(pdev
),
5308 func_name(adapter
), mc_name(adapter
), adapter
->port_name
);
5315 be_drv_cleanup(adapter
);
5317 be_unmap_pci_bars(adapter
);
5319 free_netdev(netdev
);
5321 pci_release_regions(pdev
);
5323 pci_disable_device(pdev
);
5325 dev_err(&pdev
->dev
, "%s initialization failed\n", nic_name(pdev
));
5329 static int be_suspend(struct pci_dev
*pdev
, pm_message_t state
)
5331 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5333 if (adapter
->wol_en
)
5334 be_setup_wol(adapter
, true);
5336 be_intr_set(adapter
, false);
5337 be_cancel_err_detection(adapter
);
5339 be_cleanup(adapter
);
5341 pci_save_state(pdev
);
5342 pci_disable_device(pdev
);
5343 pci_set_power_state(pdev
, pci_choose_state(pdev
, state
));
5347 static int be_pci_resume(struct pci_dev
*pdev
)
5349 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5352 status
= pci_enable_device(pdev
);
5356 pci_restore_state(pdev
);
5358 status
= be_resume(adapter
);
5362 be_schedule_err_detection(adapter
);
5364 if (adapter
->wol_en
)
5365 be_setup_wol(adapter
, false);
5371 * An FLR will stop BE from DMAing any data.
5373 static void be_shutdown(struct pci_dev
*pdev
)
5375 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5380 be_roce_dev_shutdown(adapter
);
5381 cancel_delayed_work_sync(&adapter
->work
);
5382 be_cancel_err_detection(adapter
);
5384 netif_device_detach(adapter
->netdev
);
5386 be_cmd_reset_function(adapter
);
5388 pci_disable_device(pdev
);
5391 static pci_ers_result_t
be_eeh_err_detected(struct pci_dev
*pdev
,
5392 pci_channel_state_t state
)
5394 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5396 dev_err(&adapter
->pdev
->dev
, "EEH error detected\n");
5398 if (!be_check_error(adapter
, BE_ERROR_EEH
)) {
5399 be_set_error(adapter
, BE_ERROR_EEH
);
5401 be_cancel_err_detection(adapter
);
5403 be_cleanup(adapter
);
5406 if (state
== pci_channel_io_perm_failure
)
5407 return PCI_ERS_RESULT_DISCONNECT
;
5409 pci_disable_device(pdev
);
5411 /* The error could cause the FW to trigger a flash debug dump.
5412 * Resetting the card while flash dump is in progress
5413 * can cause it not to recover; wait for it to finish.
5414 * Wait only for first function as it is needed only once per
5417 if (pdev
->devfn
== 0)
5420 return PCI_ERS_RESULT_NEED_RESET
;
5423 static pci_ers_result_t
be_eeh_reset(struct pci_dev
*pdev
)
5425 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5428 dev_info(&adapter
->pdev
->dev
, "EEH reset\n");
5430 status
= pci_enable_device(pdev
);
5432 return PCI_ERS_RESULT_DISCONNECT
;
5434 pci_set_master(pdev
);
5435 pci_restore_state(pdev
);
5437 /* Check if card is ok and fw is ready */
5438 dev_info(&adapter
->pdev
->dev
,
5439 "Waiting for FW to be ready after EEH reset\n");
5440 status
= be_fw_wait_ready(adapter
);
5442 return PCI_ERS_RESULT_DISCONNECT
;
5444 pci_cleanup_aer_uncorrect_error_status(pdev
);
5445 be_clear_error(adapter
, BE_CLEAR_ALL
);
5446 return PCI_ERS_RESULT_RECOVERED
;
5449 static void be_eeh_resume(struct pci_dev
*pdev
)
5452 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5454 dev_info(&adapter
->pdev
->dev
, "EEH resume\n");
5456 pci_save_state(pdev
);
5458 status
= be_resume(adapter
);
5462 be_schedule_err_detection(adapter
);
5465 dev_err(&adapter
->pdev
->dev
, "EEH resume failed\n");
5468 static int be_pci_sriov_configure(struct pci_dev
*pdev
, int num_vfs
)
5470 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5475 be_vf_clear(adapter
);
5477 adapter
->num_vfs
= num_vfs
;
5479 if (adapter
->num_vfs
== 0 && pci_vfs_assigned(pdev
)) {
5480 dev_warn(&pdev
->dev
,
5481 "Cannot disable VFs while they are assigned\n");
5485 /* When the HW is in SRIOV capable configuration, the PF-pool resources
5486 * are equally distributed across the max-number of VFs. The user may
5487 * request only a subset of the max-vfs to be enabled.
5488 * Based on num_vfs, redistribute the resources across num_vfs so that
5489 * each VF will have access to more number of resources.
5490 * This facility is not available in BE3 FW.
5491 * Also, this is done by FW in Lancer chip.
5493 if (skyhawk_chip(adapter
) && !pci_num_vf(pdev
)) {
5494 num_vf_qs
= be_calculate_vf_qs(adapter
, adapter
->num_vfs
);
5495 status
= be_cmd_set_sriov_config(adapter
, adapter
->pool_res
,
5496 adapter
->num_vfs
, num_vf_qs
);
5499 "Failed to optimize SR-IOV resources\n");
5502 status
= be_get_resources(adapter
);
5504 return be_cmd_status(status
);
5506 /* Updating real_num_tx/rx_queues() requires rtnl_lock() */
5508 status
= be_update_queues(adapter
);
5511 return be_cmd_status(status
);
5513 if (adapter
->num_vfs
)
5514 status
= be_vf_setup(adapter
);
5517 return adapter
->num_vfs
;
5522 static const struct pci_error_handlers be_eeh_handlers
= {
5523 .error_detected
= be_eeh_err_detected
,
5524 .slot_reset
= be_eeh_reset
,
5525 .resume
= be_eeh_resume
,
5528 static struct pci_driver be_driver
= {
5530 .id_table
= be_dev_ids
,
5532 .remove
= be_remove
,
5533 .suspend
= be_suspend
,
5534 .resume
= be_pci_resume
,
5535 .shutdown
= be_shutdown
,
5536 .sriov_configure
= be_pci_sriov_configure
,
5537 .err_handler
= &be_eeh_handlers
5540 static int __init
be_init_module(void)
5542 if (rx_frag_size
!= 8192 && rx_frag_size
!= 4096 &&
5543 rx_frag_size
!= 2048) {
5544 printk(KERN_WARNING DRV_NAME
5545 " : Module param rx_frag_size must be 2048/4096/8192."
5547 rx_frag_size
= 2048;
5551 pr_info(DRV_NAME
" : Module param num_vfs is obsolete.");
5552 pr_info(DRV_NAME
" : Use sysfs method to enable VFs\n");
5555 return pci_register_driver(&be_driver
);
5557 module_init(be_init_module
);
5559 static void __exit
be_exit_module(void)
5561 pci_unregister_driver(&be_driver
);
5563 module_exit(be_exit_module
);