drivers/net/wireless/broadcom/b43legacy/b43legacy.h

   1 #ifndef B43legacy_H_
   2 #define B43legacy_H_
   3
   4 #include <linux/hw_random.h>
   5 #include <linux/kernel.h>
   6 #include <linux/spinlock.h>
   7 #include <linux/interrupt.h>
   8 #include <linux/stringify.h>
   9 #include <linux/netdevice.h>
  10 #include <linux/pci.h>
  11 #include <linux/atomic.h>
  12 #include <linux/io.h>
  13
  14 #include <linux/ssb/ssb.h>
  15 #include <linux/ssb/ssb_driver_chipcommon.h>
  16 #include <linux/completion.h>
  17
  18 #include <net/mac80211.h>
  19
  20 #include "debugfs.h"
  21 #include "leds.h"
  22 #include "rfkill.h"
  23 #include "phy.h"
  24
  25
  26 #define B43legacy_IRQWAIT_MAX_RETRIES   20
  27
  28 /* MMIO offsets */
  29 #define B43legacy_MMIO_DMA0_REASON      0x20
  30 #define B43legacy_MMIO_DMA0_IRQ_MASK    0x24
  31 #define B43legacy_MMIO_DMA1_REASON      0x28
  32 #define B43legacy_MMIO_DMA1_IRQ_MASK    0x2C
  33 #define B43legacy_MMIO_DMA2_REASON      0x30
  34 #define B43legacy_MMIO_DMA2_IRQ_MASK    0x34
  35 #define B43legacy_MMIO_DMA3_REASON      0x38
  36 #define B43legacy_MMIO_DMA3_IRQ_MASK    0x3C
  37 #define B43legacy_MMIO_DMA4_REASON      0x40
  38 #define B43legacy_MMIO_DMA4_IRQ_MASK    0x44
  39 #define B43legacy_MMIO_DMA5_REASON      0x48
  40 #define B43legacy_MMIO_DMA5_IRQ_MASK    0x4C
  41 #define B43legacy_MMIO_MACCTL           0x120   /* MAC control */
  42 #define B43legacy_MMIO_MACCMD           0x124   /* MAC command */
  43 #define B43legacy_MMIO_GEN_IRQ_REASON   0x128
  44 #define B43legacy_MMIO_GEN_IRQ_MASK     0x12C
  45 #define B43legacy_MMIO_RAM_CONTROL      0x130
  46 #define B43legacy_MMIO_RAM_DATA         0x134
  47 #define B43legacy_MMIO_PS_STATUS                0x140
  48 #define B43legacy_MMIO_RADIO_HWENABLED_HI       0x158
  49 #define B43legacy_MMIO_SHM_CONTROL      0x160
  50 #define B43legacy_MMIO_SHM_DATA         0x164
  51 #define B43legacy_MMIO_SHM_DATA_UNALIGNED       0x166
  52 #define B43legacy_MMIO_XMITSTAT_0               0x170
  53 #define B43legacy_MMIO_XMITSTAT_1               0x174
  54 #define B43legacy_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */
  55 #define B43legacy_MMIO_REV3PLUS_TSF_HIGH        0x184 /* core rev >= 3 only */
  56 #define B43legacy_MMIO_TSF_CFP_REP      0x188
  57 #define B43legacy_MMIO_TSF_CFP_START    0x18C
  58 /* 32-bit DMA */
  59 #define B43legacy_MMIO_DMA32_BASE0      0x200
  60 #define B43legacy_MMIO_DMA32_BASE1      0x220
  61 #define B43legacy_MMIO_DMA32_BASE2      0x240
  62 #define B43legacy_MMIO_DMA32_BASE3      0x260
  63 #define B43legacy_MMIO_DMA32_BASE4      0x280
  64 #define B43legacy_MMIO_DMA32_BASE5      0x2A0
  65 /* 64-bit DMA */
  66 #define B43legacy_MMIO_DMA64_BASE0      0x200
  67 #define B43legacy_MMIO_DMA64_BASE1      0x240
  68 #define B43legacy_MMIO_DMA64_BASE2      0x280
  69 #define B43legacy_MMIO_DMA64_BASE3      0x2C0
  70 #define B43legacy_MMIO_DMA64_BASE4      0x300
  71 #define B43legacy_MMIO_DMA64_BASE5      0x340
  72 /* PIO */
  73 #define B43legacy_MMIO_PIO1_BASE                0x300
  74 #define B43legacy_MMIO_PIO2_BASE                0x310
  75 #define B43legacy_MMIO_PIO3_BASE                0x320
  76 #define B43legacy_MMIO_PIO4_BASE                0x330
  77
  78 #define B43legacy_MMIO_PHY_VER          0x3E0
  79 #define B43legacy_MMIO_PHY_RADIO                0x3E2
  80 #define B43legacy_MMIO_PHY0             0x3E6
  81 #define B43legacy_MMIO_ANTENNA          0x3E8
  82 #define B43legacy_MMIO_CHANNEL          0x3F0
  83 #define B43legacy_MMIO_CHANNEL_EXT      0x3F4
  84 #define B43legacy_MMIO_RADIO_CONTROL    0x3F6
  85 #define B43legacy_MMIO_RADIO_DATA_HIGH  0x3F8
  86 #define B43legacy_MMIO_RADIO_DATA_LOW   0x3FA
  87 #define B43legacy_MMIO_PHY_CONTROL      0x3FC
  88 #define B43legacy_MMIO_PHY_DATA         0x3FE
  89 #define B43legacy_MMIO_MACFILTER_CONTROL        0x420
  90 #define B43legacy_MMIO_MACFILTER_DATA   0x422
  91 #define B43legacy_MMIO_RCMTA_COUNT      0x43C /* Receive Match Transmitter Addr */
  92 #define B43legacy_MMIO_RADIO_HWENABLED_LO       0x49A
  93 #define B43legacy_MMIO_GPIO_CONTROL     0x49C
  94 #define B43legacy_MMIO_GPIO_MASK                0x49E
  95 #define B43legacy_MMIO_TSF_CFP_PRETBTT  0x612
  96 #define B43legacy_MMIO_TSF_0            0x632 /* core rev < 3 only */
  97 #define B43legacy_MMIO_TSF_1            0x634 /* core rev < 3 only */
  98 #define B43legacy_MMIO_TSF_2            0x636 /* core rev < 3 only */
  99 #define B43legacy_MMIO_TSF_3            0x638 /* core rev < 3 only */
 100 #define B43legacy_MMIO_RNG              0x65A
 101 #define B43legacy_MMIO_POWERUP_DELAY    0x6A8
 102
 103 /* SPROM boardflags_lo values */
 104 #define B43legacy_BFL_PACTRL            0x0002
 105 #define B43legacy_BFL_RSSI              0x0008
 106 #define B43legacy_BFL_EXTLNA            0x1000
 107
 108 /* GPIO register offset, in both ChipCommon and PCI core. */
 109 #define B43legacy_GPIO_CONTROL          0x6c
 110
 111 /* SHM Routing */
 112 #define B43legacy_SHM_SHARED            0x0001
 113 #define B43legacy_SHM_WIRELESS          0x0002
 114 #define B43legacy_SHM_HW                0x0004
 115 #define B43legacy_SHM_UCODE             0x0300
 116
 117 /* SHM Routing modifiers */
 118 #define B43legacy_SHM_AUTOINC_R         0x0200 /* Read Auto-increment */
 119 #define B43legacy_SHM_AUTOINC_W         0x0100 /* Write Auto-increment */
 120 #define B43legacy_SHM_AUTOINC_RW        (B43legacy_SHM_AUTOINC_R | \
 121                                          B43legacy_SHM_AUTOINC_W)
 122
 123 /* Misc SHM_SHARED offsets */
 124 #define B43legacy_SHM_SH_WLCOREREV      0x0016 /* 802.11 core revision */
 125 #define B43legacy_SHM_SH_HOSTFLO        0x005E /* Hostflags ucode opts (low) */
 126 #define B43legacy_SHM_SH_HOSTFHI        0x0060 /* Hostflags ucode opts (high) */
 127 /* SHM_SHARED crypto engine */
 128 #define B43legacy_SHM_SH_KEYIDXBLOCK    0x05D4 /* Key index/algorithm block */
 129 /* SHM_SHARED beacon/AP variables */
 130 #define B43legacy_SHM_SH_DTIMP          0x0012 /* DTIM period */
 131 #define B43legacy_SHM_SH_BTL0           0x0018 /* Beacon template length 0 */
 132 #define B43legacy_SHM_SH_BTL1           0x001A /* Beacon template length 1 */
 133 #define B43legacy_SHM_SH_BTSFOFF        0x001C /* Beacon TSF offset */
 134 #define B43legacy_SHM_SH_TIMPOS         0x001E /* TIM position in beacon */
 135 #define B43legacy_SHM_SH_BEACPHYCTL     0x0054 /* Beacon PHY TX control word */
 136 /* SHM_SHARED ACK/CTS control */
 137 #define B43legacy_SHM_SH_ACKCTSPHYCTL   0x0022 /* ACK/CTS PHY control word */
 138 /* SHM_SHARED probe response variables */
 139 #define B43legacy_SHM_SH_PRTLEN         0x004A /* Probe Response template length */
 140 #define B43legacy_SHM_SH_PRMAXTIME      0x0074 /* Probe Response max time */
 141 #define B43legacy_SHM_SH_PRPHYCTL       0x0188 /* Probe Resp PHY TX control */
 142 /* SHM_SHARED rate tables */
 143 #define B43legacy_SHM_SH_OFDMDIRECT     0x0480 /* Pointer to OFDM direct map */
 144 #define B43legacy_SHM_SH_OFDMBASIC      0x04A0 /* Pointer to OFDM basic rate map */
 145 #define B43legacy_SHM_SH_CCKDIRECT      0x04C0 /* Pointer to CCK direct map */
 146 #define B43legacy_SHM_SH_CCKBASIC       0x04E0 /* Pointer to CCK basic rate map */
 147 /* SHM_SHARED microcode soft registers */
 148 #define B43legacy_SHM_SH_UCODEREV       0x0000 /* Microcode revision */
 149 #define B43legacy_SHM_SH_UCODEPATCH     0x0002 /* Microcode patchlevel */
 150 #define B43legacy_SHM_SH_UCODEDATE      0x0004 /* Microcode date */
 151 #define B43legacy_SHM_SH_UCODETIME      0x0006 /* Microcode time */
 152 #define B43legacy_SHM_SH_SPUWKUP        0x0094 /* pre-wakeup for synth PU in us */
 153 #define B43legacy_SHM_SH_PRETBTT        0x0096 /* pre-TBTT in us */
 154
 155 #define B43legacy_UCODEFLAGS_OFFSET     0x005E
 156
 157 /* Hardware Radio Enable masks */
 158 #define B43legacy_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
 159 #define B43legacy_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)
 160
 161 /* HostFlags. See b43legacy_hf_read/write() */
 162 #define B43legacy_HF_SYMW               0x00000002 /* G-PHY SYM workaround */
 163 #define B43legacy_HF_GDCW               0x00000020 /* G-PHY DV cancel filter */
 164 #define B43legacy_HF_OFDMPABOOST        0x00000040 /* Enable PA boost OFDM */
 165 #define B43legacy_HF_EDCF               0x00000100 /* on if WME/MAC suspended */
 166
 167 /* MacFilter offsets. */
 168 #define B43legacy_MACFILTER_SELF        0x0000
 169 #define B43legacy_MACFILTER_BSSID       0x0003
 170 #define B43legacy_MACFILTER_MAC         0x0010
 171
 172 /* PHYVersioning */
 173 #define B43legacy_PHYTYPE_B             0x01
 174 #define B43legacy_PHYTYPE_G             0x02
 175
 176 /* PHYRegisters */
 177 #define B43legacy_PHY_G_LO_CONTROL      0x0810
 178 #define B43legacy_PHY_ILT_G_CTRL        0x0472
 179 #define B43legacy_PHY_ILT_G_DATA1       0x0473
 180 #define B43legacy_PHY_ILT_G_DATA2       0x0474
 181 #define B43legacy_PHY_G_PCTL            0x0029
 182 #define B43legacy_PHY_RADIO_BITFIELD    0x0401
 183 #define B43legacy_PHY_G_CRS             0x0429
 184 #define B43legacy_PHY_NRSSILT_CTRL      0x0803
 185 #define B43legacy_PHY_NRSSILT_DATA      0x0804
 186
 187 /* RadioRegisters */
 188 #define B43legacy_RADIOCTL_ID           0x01
 189
 190 /* MAC Control bitfield */
 191 #define B43legacy_MACCTL_ENABLED        0x00000001 /* MAC Enabled */
 192 #define B43legacy_MACCTL_PSM_RUN        0x00000002 /* Run Microcode */
 193 #define B43legacy_MACCTL_PSM_JMP0       0x00000004 /* Microcode jump to 0 */
 194 #define B43legacy_MACCTL_SHM_ENABLED    0x00000100 /* SHM Enabled */
 195 #define B43legacy_MACCTL_IHR_ENABLED    0x00000400 /* IHR Region Enabled */
 196 #define B43legacy_MACCTL_BE             0x00010000 /* Big Endian mode */
 197 #define B43legacy_MACCTL_INFRA          0x00020000 /* Infrastructure mode */
 198 #define B43legacy_MACCTL_AP             0x00040000 /* AccessPoint mode */
 199 #define B43legacy_MACCTL_RADIOLOCK      0x00080000 /* Radio lock */
 200 #define B43legacy_MACCTL_BEACPROMISC    0x00100000 /* Beacon Promiscuous */
 201 #define B43legacy_MACCTL_KEEP_BADPLCP   0x00200000 /* Keep bad PLCP frames */
 202 #define B43legacy_MACCTL_KEEP_CTL       0x00400000 /* Keep control frames */
 203 #define B43legacy_MACCTL_KEEP_BAD       0x00800000 /* Keep bad frames (FCS) */
 204 #define B43legacy_MACCTL_PROMISC        0x01000000 /* Promiscuous mode */
 205 #define B43legacy_MACCTL_HWPS           0x02000000 /* Hardware Power Saving */
 206 #define B43legacy_MACCTL_AWAKE          0x04000000 /* Device is awake */
 207 #define B43legacy_MACCTL_TBTTHOLD       0x10000000 /* TBTT Hold */
 208 #define B43legacy_MACCTL_GMODE          0x80000000 /* G Mode */
 209
 210 /* MAC Command bitfield */
 211 #define B43legacy_MACCMD_BEACON0_VALID  0x00000001 /* Beacon 0 in template RAM is busy/valid */
 212 #define B43legacy_MACCMD_BEACON1_VALID  0x00000002 /* Beacon 1 in template RAM is busy/valid */
 213 #define B43legacy_MACCMD_DFQ_VALID      0x00000004 /* Directed frame queue valid (IBSS PS mode, ATIM) */
 214 #define B43legacy_MACCMD_CCA            0x00000008 /* Clear channel assessment */
 215 #define B43legacy_MACCMD_BGNOISE        0x00000010 /* Background noise */
 216
 217 /* 802.11 core specific TM State Low flags */
 218 #define B43legacy_TMSLOW_GMODE          0x20000000 /* G Mode Enable */
 219 #define B43legacy_TMSLOW_PLLREFSEL      0x00200000 /* PLL Freq Ref Select */
 220 #define B43legacy_TMSLOW_MACPHYCLKEN    0x00100000 /* MAC PHY Clock Ctrl Enbl */
 221 #define B43legacy_TMSLOW_PHYRESET       0x00080000 /* PHY Reset */
 222 #define B43legacy_TMSLOW_PHYCLKEN       0x00040000 /* PHY Clock Enable */
 223
 224 /* 802.11 core specific TM State High flags */
 225 #define B43legacy_TMSHIGH_FCLOCK        0x00040000 /* Fast Clock Available */
 226 #define B43legacy_TMSHIGH_GPHY          0x00010000 /* G-PHY avail (rev >= 5) */
 227
 228 #define B43legacy_UCODEFLAG_AUTODIV       0x0001
 229
 230 /* Generic-Interrupt reasons. */
 231 #define B43legacy_IRQ_MAC_SUSPENDED     0x00000001
 232 #define B43legacy_IRQ_BEACON            0x00000002
 233 #define B43legacy_IRQ_TBTT_INDI         0x00000004 /* Target Beacon Transmit Time */
 234 #define B43legacy_IRQ_BEACON_TX_OK      0x00000008
 235 #define B43legacy_IRQ_BEACON_CANCEL     0x00000010
 236 #define B43legacy_IRQ_ATIM_END          0x00000020
 237 #define B43legacy_IRQ_PMQ               0x00000040
 238 #define B43legacy_IRQ_PIO_WORKAROUND    0x00000100
 239 #define B43legacy_IRQ_MAC_TXERR         0x00000200
 240 #define B43legacy_IRQ_PHY_TXERR         0x00000800
 241 #define B43legacy_IRQ_PMEVENT           0x00001000
 242 #define B43legacy_IRQ_TIMER0            0x00002000
 243 #define B43legacy_IRQ_TIMER1            0x00004000
 244 #define B43legacy_IRQ_DMA               0x00008000
 245 #define B43legacy_IRQ_TXFIFO_FLUSH_OK   0x00010000
 246 #define B43legacy_IRQ_CCA_MEASURE_OK    0x00020000
 247 #define B43legacy_IRQ_NOISESAMPLE_OK    0x00040000
 248 #define B43legacy_IRQ_UCODE_DEBUG       0x08000000
 249 #define B43legacy_IRQ_RFKILL            0x10000000
 250 #define B43legacy_IRQ_TX_OK             0x20000000
 251 #define B43legacy_IRQ_PHY_G_CHANGED     0x40000000
 252 #define B43legacy_IRQ_TIMEOUT           0x80000000
 253
 254 #define B43legacy_IRQ_ALL               0xFFFFFFFF
 255 #define B43legacy_IRQ_MASKTEMPLATE      (B43legacy_IRQ_MAC_SUSPENDED |  \
 256                                          B43legacy_IRQ_TBTT_INDI |      \
 257                                          B43legacy_IRQ_ATIM_END |       \
 258                                          B43legacy_IRQ_PMQ |            \
 259                                          B43legacy_IRQ_MAC_TXERR |      \
 260                                          B43legacy_IRQ_PHY_TXERR |      \
 261                                          B43legacy_IRQ_DMA |            \
 262                                          B43legacy_IRQ_TXFIFO_FLUSH_OK | \
 263                                          B43legacy_IRQ_NOISESAMPLE_OK | \
 264                                          B43legacy_IRQ_UCODE_DEBUG |    \
 265                                          B43legacy_IRQ_RFKILL |         \
 266                                          B43legacy_IRQ_TX_OK)
 267
 268 /* Device specific rate values.
 269  * The actual values defined here are (rate_in_mbps * 2).
 270  * Some code depends on this. Don't change it. */
 271 #define B43legacy_CCK_RATE_1MB          2
 272 #define B43legacy_CCK_RATE_2MB          4
 273 #define B43legacy_CCK_RATE_5MB          11
 274 #define B43legacy_CCK_RATE_11MB         22
 275 #define B43legacy_OFDM_RATE_6MB         12
 276 #define B43legacy_OFDM_RATE_9MB         18
 277 #define B43legacy_OFDM_RATE_12MB        24
 278 #define B43legacy_OFDM_RATE_18MB        36
 279 #define B43legacy_OFDM_RATE_24MB        48
 280 #define B43legacy_OFDM_RATE_36MB        72
 281 #define B43legacy_OFDM_RATE_48MB        96
 282 #define B43legacy_OFDM_RATE_54MB        108
 283 /* Convert a b43legacy rate value to a rate in 100kbps */
 284 #define B43legacy_RATE_TO_100KBPS(rate) (((rate) * 10) / 2)
 285
 286
 287 #define B43legacy_DEFAULT_SHORT_RETRY_LIMIT     7
 288 #define B43legacy_DEFAULT_LONG_RETRY_LIMIT      4
 289
 290 #define B43legacy_PHY_TX_BADNESS_LIMIT          1000
 291
 292 /* Max size of a security key */
 293 #define B43legacy_SEC_KEYSIZE           16
 294 /* Security algorithms. */
 295 enum {
 296         B43legacy_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */
 297         B43legacy_SEC_ALGO_WEP40,
 298         B43legacy_SEC_ALGO_TKIP,
 299         B43legacy_SEC_ALGO_AES,
 300         B43legacy_SEC_ALGO_WEP104,
 301         B43legacy_SEC_ALGO_AES_LEGACY,
 302 };
 303
 304 /* Core Information Registers */
 305 #define B43legacy_CIR_BASE                0xf00
 306 #define B43legacy_CIR_SBTPSFLAG           (B43legacy_CIR_BASE + 0x18)
 307 #define B43legacy_CIR_SBIMSTATE           (B43legacy_CIR_BASE + 0x90)
 308 #define B43legacy_CIR_SBINTVEC            (B43legacy_CIR_BASE + 0x94)
 309 #define B43legacy_CIR_SBTMSTATELOW        (B43legacy_CIR_BASE + 0x98)
 310 #define B43legacy_CIR_SBTMSTATEHIGH       (B43legacy_CIR_BASE + 0x9c)
 311 #define B43legacy_CIR_SBIMCONFIGLOW       (B43legacy_CIR_BASE + 0xa8)
 312 #define B43legacy_CIR_SB_ID_HI            (B43legacy_CIR_BASE + 0xfc)
 313
 314 /* sbtmstatehigh state flags */
 315 #define B43legacy_SBTMSTATEHIGH_SERROR          0x00000001
 316 #define B43legacy_SBTMSTATEHIGH_BUSY            0x00000004
 317 #define B43legacy_SBTMSTATEHIGH_TIMEOUT         0x00000020
 318 #define B43legacy_SBTMSTATEHIGH_G_PHY_AVAIL     0x00010000
 319 #define B43legacy_SBTMSTATEHIGH_COREFLAGS       0x1FFF0000
 320 #define B43legacy_SBTMSTATEHIGH_DMA64BIT        0x10000000
 321 #define B43legacy_SBTMSTATEHIGH_GATEDCLK        0x20000000
 322 #define B43legacy_SBTMSTATEHIGH_BISTFAILED      0x40000000
 323 #define B43legacy_SBTMSTATEHIGH_BISTCOMPLETE    0x80000000
 324
 325 /* sbimstate flags */
 326 #define B43legacy_SBIMSTATE_IB_ERROR            0x20000
 327 #define B43legacy_SBIMSTATE_TIMEOUT             0x40000
 328
 329 #define PFX             KBUILD_MODNAME ": "
 330 #ifdef assert
 331 # undef assert
 332 #endif
 333 #ifdef CONFIG_B43LEGACY_DEBUG
 334 # define B43legacy_WARN_ON(x)   WARN_ON(x)
 335 # define B43legacy_BUG_ON(expr)                                         \
 336         do {                                                            \
 337                 if (unlikely((expr))) {                                 \
 338                         printk(KERN_INFO PFX "Test (%s) failed\n",      \
 339                                               #expr);                   \
 340                         BUG_ON(expr);                                   \
 341                 }                                                       \
 342         } while (0)
 343 # define B43legacy_DEBUG        1
 344 #else
 345 /* This will evaluate the argument even if debugging is disabled. */
 346 static inline bool __b43legacy_warn_on_dummy(bool x) { return x; }
 347 # define B43legacy_WARN_ON(x)   __b43legacy_warn_on_dummy(unlikely(!!(x)))
 348 # define B43legacy_BUG_ON(x)    do { /* nothing */ } while (0)
 349 # define B43legacy_DEBUG        0
 350 #endif
 351
 352
 353 struct net_device;
 354 struct pci_dev;
 355 struct b43legacy_dmaring;
 356 struct b43legacy_pioqueue;
 357
 358 /* The firmware file header */
 359 #define B43legacy_FW_TYPE_UCODE 'u'
 360 #define B43legacy_FW_TYPE_PCM   'p'
 361 #define B43legacy_FW_TYPE_IV    'i'
 362 struct b43legacy_fw_header {
 363         /* File type */
 364         u8 type;
 365         /* File format version */
 366         u8 ver;
 367         u8 __padding[2];
 368         /* Size of the data. For ucode and PCM this is in bytes.
 369          * For IV this is number-of-ivs. */
 370         __be32 size;
 371 } __packed;
 372
 373 /* Initial Value file format */
 374 #define B43legacy_IV_OFFSET_MASK        0x7FFF
 375 #define B43legacy_IV_32BIT              0x8000
 376 struct b43legacy_iv {
 377         __be16 offset_size;
 378         union {
 379                 __be16 d16;
 380                 __be32 d32;
 381         } data __packed;
 382 } __packed;
 383
 384 #define B43legacy_PHYMODE(phytype)      (1 << (phytype))
 385 #define B43legacy_PHYMODE_B             B43legacy_PHYMODE       \
 386                                         ((B43legacy_PHYTYPE_B))
 387 #define B43legacy_PHYMODE_G             B43legacy_PHYMODE       \
 388                                         ((B43legacy_PHYTYPE_G))
 389
 390 /* Value pair to measure the LocalOscillator. */
 391 struct b43legacy_lopair {
 392         s8 low;
 393         s8 high;
 394         u8 used:1;
 395 };
 396 #define B43legacy_LO_COUNT      (14*4)
 397
 398 struct b43legacy_phy {
 399         /* Possible PHYMODEs on this PHY */
 400         u8 possible_phymodes;
 401         /* GMODE bit enabled in MACCTL? */
 402         bool gmode;
 403
 404         /* Analog Type */
 405         u8 analog;
 406         /* B43legacy_PHYTYPE_ */
 407         u8 type;
 408         /* PHY revision number. */
 409         u8 rev;
 410
 411         u16 antenna_diversity;
 412         u16 savedpctlreg;
 413         /* Radio versioning */
 414         u16 radio_manuf;        /* Radio manufacturer */
 415         u16 radio_ver;          /* Radio version */
 416         u8 calibrated:1;
 417         u8 radio_rev;           /* Radio revision */
 418
 419         bool dyn_tssi_tbl;      /* tssi2dbm is kmalloc()ed. */
 420
 421         /* ACI (adjacent channel interference) flags. */
 422         bool aci_enable;
 423         bool aci_wlan_automatic;
 424         bool aci_hw_rssi;
 425
 426         /* Radio switched on/off */
 427         bool radio_on;
 428         struct {
 429                 /* Values saved when turning the radio off.
 430                  * They are needed when turning it on again. */
 431                 bool valid;
 432                 u16 rfover;
 433                 u16 rfoverval;
 434         } radio_off_context;
 435
 436         u16 minlowsig[2];
 437         u16 minlowsigpos[2];
 438
 439         /* LO Measurement Data.
 440          * Use b43legacy_get_lopair() to get a value.
 441          */
 442         struct b43legacy_lopair *_lo_pairs;
 443         /* TSSI to dBm table in use */
 444         const s8 *tssi2dbm;
 445         /* idle TSSI value */
 446         s8 idle_tssi;
 447         /* Target idle TSSI */
 448         int tgt_idle_tssi;
 449         /* Current idle TSSI */
 450         int cur_idle_tssi;
 451
 452         /* LocalOscillator control values. */
 453         struct b43legacy_txpower_lo_control *lo_control;
 454         /* Values from b43legacy_calc_loopback_gain() */
 455         s16 max_lb_gain;        /* Maximum Loopback gain in hdB */
 456         s16 trsw_rx_gain;       /* TRSW RX gain in hdB */
 457         s16 lna_lod_gain;       /* LNA lod */
 458         s16 lna_gain;           /* LNA */
 459         s16 pga_gain;           /* PGA */
 460
 461         /* Desired TX power level (in dBm). This is set by the user and
 462          * adjusted in b43legacy_phy_xmitpower(). */
 463         u8 power_level;
 464
 465         /* Values from b43legacy_calc_loopback_gain() */
 466         u16 loopback_gain[2];
 467
 468         /* TX Power control values. */
 469         /* B/G PHY */
 470         struct {
 471                 /* Current Radio Attenuation for TXpower recalculation. */
 472                 u16 rfatt;
 473                 /* Current Baseband Attenuation for TXpower recalculation. */
 474                 u16 bbatt;
 475                 /* Current TXpower control value for TXpower recalculation. */
 476                 u16 txctl1;
 477                 u16 txctl2;
 478         };
 479         /* A PHY */
 480         struct {
 481                 u16 txpwr_offset;
 482         };
 483
 484         /* Current Interference Mitigation mode */
 485         int interfmode;
 486         /* Stack of saved values from the Interference Mitigation code.
 487          * Each value in the stack is laid out as follows:
 488          * bit 0-11:  offset
 489          * bit 12-15: register ID
 490          * bit 16-32: value
 491          * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
 492          */
 493 #define B43legacy_INTERFSTACK_SIZE      26
 494         u32 interfstack[B43legacy_INTERFSTACK_SIZE];
 495
 496         /* Saved values from the NRSSI Slope calculation */
 497         s16 nrssi[2];
 498         s32 nrssislope;
 499         /* In memory nrssi lookup table. */
 500         s8 nrssi_lt[64];
 501
 502         /* current channel */
 503         u8 channel;
 504
 505         u16 lofcal;
 506
 507         u16 initval;
 508
 509         /* PHY TX errors counter. */
 510         atomic_t txerr_cnt;
 511
 512 #if B43legacy_DEBUG
 513         /* Manual TX-power control enabled? */
 514         bool manual_txpower_control;
 515         /* PHY registers locked by b43legacy_phy_lock()? */
 516         bool phy_locked;
 517 #endif /* B43legacy_DEBUG */
 518 };
 519
 520 /* Data structures for DMA transmission, per 80211 core. */
 521 struct b43legacy_dma {
 522         struct b43legacy_dmaring *tx_ring0;
 523         struct b43legacy_dmaring *tx_ring1;
 524         struct b43legacy_dmaring *tx_ring2;
 525         struct b43legacy_dmaring *tx_ring3;
 526         struct b43legacy_dmaring *tx_ring4;
 527         struct b43legacy_dmaring *tx_ring5;
 528
 529         struct b43legacy_dmaring *rx_ring0;
 530         struct b43legacy_dmaring *rx_ring3; /* only on core.rev < 5 */
 531
 532         u32 translation; /* Routing bits */
 533 };
 534
 535 /* Data structures for PIO transmission, per 80211 core. */
 536 struct b43legacy_pio {
 537         struct b43legacy_pioqueue *queue0;
 538         struct b43legacy_pioqueue *queue1;
 539         struct b43legacy_pioqueue *queue2;
 540         struct b43legacy_pioqueue *queue3;
 541 };
 542
 543 /* Context information for a noise calculation (Link Quality). */
 544 struct b43legacy_noise_calculation {
 545         u8 channel_at_start;
 546         bool calculation_running;
 547         u8 nr_samples;
 548         s8 samples[8][4];
 549 };
 550
 551 struct b43legacy_stats {
 552         u8 link_noise;
 553         /* Store the last TX/RX times here for updating the leds. */
 554         unsigned long last_tx;
 555         unsigned long last_rx;
 556 };
 557
 558 struct b43legacy_key {
 559         void *keyconf;
 560         bool enabled;
 561         u8 algorithm;
 562 };
 563
 564 #define B43legacy_QOS_QUEUE_NUM 4
 565
 566 struct b43legacy_wldev;
 567
 568 /* QOS parameters for a queue. */
 569 struct b43legacy_qos_params {
 570         /* The QOS parameters */
 571         struct ieee80211_tx_queue_params p;
 572 };
 573
 574 /* Data structure for the WLAN parts (802.11 cores) of the b43legacy chip. */
 575 struct b43legacy_wl {
 576         /* Pointer to the active wireless device on this chip */
 577         struct b43legacy_wldev *current_dev;
 578         /* Pointer to the ieee80211 hardware data structure */
 579         struct ieee80211_hw *hw;
 580
 581         spinlock_t irq_lock;            /* locks IRQ */
 582         struct mutex mutex;             /* locks wireless core state */
 583         spinlock_t leds_lock;           /* lock for leds */
 584
 585         /* firmware loading work */
 586         struct work_struct firmware_load;
 587
 588         /* We can only have one operating interface (802.11 core)
 589          * at a time. General information about this interface follows.
 590          */
 591
 592         struct ieee80211_vif *vif;
 593         /* MAC address (can be NULL). */
 594         u8 mac_addr[ETH_ALEN];
 595         /* Current BSSID (can be NULL). */
 596         u8 bssid[ETH_ALEN];
 597         /* Interface type. (IEEE80211_IF_TYPE_XXX) */
 598         int if_type;
 599         /* Is the card operating in AP, STA or IBSS mode? */
 600         bool operating;
 601         /* filter flags */
 602         unsigned int filter_flags;
 603         /* Stats about the wireless interface */
 604         struct ieee80211_low_level_stats ieee_stats;
 605
 606 #ifdef CONFIG_B43LEGACY_HWRNG
 607         struct hwrng rng;
 608         u8 rng_initialized;
 609         char rng_name[30 + 1];
 610 #endif
 611
 612         /* List of all wireless devices on this chip */
 613         struct list_head devlist;
 614         u8 nr_devs;
 615
 616         bool radiotap_enabled;
 617         bool radio_enabled;
 618
 619         /* The beacon we are currently using (AP or IBSS mode).
 620          * This beacon stuff is protected by the irq_lock. */
 621         struct sk_buff *current_beacon;
 622         bool beacon0_uploaded;
 623         bool beacon1_uploaded;
 624         bool beacon_templates_virgin; /* Never wrote the templates? */
 625         struct work_struct beacon_update_trigger;
 626         /* The current QOS parameters for the 4 queues. */
 627         struct b43legacy_qos_params qos_params[B43legacy_QOS_QUEUE_NUM];
 628
 629         /* Packet transmit work */
 630         struct work_struct tx_work;
 631
 632         /* Queue of packets to be transmitted. */
 633         struct sk_buff_head tx_queue[B43legacy_QOS_QUEUE_NUM];
 634
 635         /* Flag that implement the queues stopping. */
 636         bool tx_queue_stopped[B43legacy_QOS_QUEUE_NUM];
 637
 638 };
 639
 640 /* Pointers to the firmware data and meta information about it. */
 641 struct b43legacy_firmware {
 642         /* Microcode */
 643         const struct firmware *ucode;
 644         /* PCM code */
 645         const struct firmware *pcm;
 646         /* Initial MMIO values for the firmware */
 647         const struct firmware *initvals;
 648         /* Initial MMIO values for the firmware, band-specific */
 649         const struct firmware *initvals_band;
 650         /* Firmware revision */
 651         u16 rev;
 652         /* Firmware patchlevel */
 653         u16 patch;
 654 };
 655
 656 /* Device (802.11 core) initialization status. */
 657 enum {
 658         B43legacy_STAT_UNINIT           = 0, /* Uninitialized. */
 659         B43legacy_STAT_INITIALIZED      = 1, /* Initialized, not yet started. */
 660         B43legacy_STAT_STARTED  = 2, /* Up and running. */
 661 };
 662 #define b43legacy_status(wldev) atomic_read(&(wldev)->__init_status)
 663 #define b43legacy_set_status(wldev, stat)       do {            \
 664                 atomic_set(&(wldev)->__init_status, (stat));    \
 665                 smp_wmb();                                      \
 666                                         } while (0)
 667
 668 /* *** ---   HOW LOCKING WORKS IN B43legacy   --- ***
 669  *
 670  * You should always acquire both, wl->mutex and wl->irq_lock unless:
 671  * - You don't need to acquire wl->irq_lock, if the interface is stopped.
 672  * - You don't need to acquire wl->mutex in the IRQ handler, IRQ tasklet
 673  *   and packet TX path (and _ONLY_ there.)
 674  */
 675
 676 /* Data structure for one wireless device (802.11 core) */
 677 struct b43legacy_wldev {
 678         struct ssb_device *dev;
 679         struct b43legacy_wl *wl;
 680
 681         /* The device initialization status.
 682          * Use b43legacy_status() to query. */
 683         atomic_t __init_status;
 684         /* Saved init status for handling suspend. */
 685         int suspend_init_status;
 686
 687         bool __using_pio;       /* Using pio rather than dma. */
 688         bool bad_frames_preempt;/* Use "Bad Frames Preemption". */
 689         bool dfq_valid;         /* Directed frame queue valid (IBSS PS mode, ATIM). */
 690         bool short_preamble;    /* TRUE if using short preamble. */
 691         bool radio_hw_enable;   /* State of radio hardware enable bit. */
 692
 693         /* PHY/Radio device. */
 694         struct b43legacy_phy phy;
 695         union {
 696                 /* DMA engines. */
 697                 struct b43legacy_dma dma;
 698                 /* PIO engines. */
 699                 struct b43legacy_pio pio;
 700         };
 701
 702         /* Various statistics about the physical device. */
 703         struct b43legacy_stats stats;
 704
 705         /* The device LEDs. */
 706         struct b43legacy_led led_tx;
 707         struct b43legacy_led led_rx;
 708         struct b43legacy_led led_assoc;
 709         struct b43legacy_led led_radio;
 710
 711         /* Reason code of the last interrupt. */
 712         u32 irq_reason;
 713         u32 dma_reason[6];
 714         /* The currently active generic-interrupt mask. */
 715         u32 irq_mask;
 716         /* Link Quality calculation context. */
 717         struct b43legacy_noise_calculation noisecalc;
 718         /* if > 0 MAC is suspended. if == 0 MAC is enabled. */
 719         int mac_suspended;
 720
 721         /* Interrupt Service Routine tasklet (bottom-half) */
 722         struct tasklet_struct isr_tasklet;
 723
 724         /* Periodic tasks */
 725         struct delayed_work periodic_work;
 726         unsigned int periodic_state;
 727
 728         struct work_struct restart_work;
 729
 730         /* encryption/decryption */
 731         u16 ktp; /* Key table pointer */
 732         u8 max_nr_keys;
 733         struct b43legacy_key key[58];
 734
 735         /* Firmware data */
 736         struct b43legacy_firmware fw;
 737         const struct firmware *fwp;     /* needed to pass fw pointer */
 738
 739         /* completion struct for firmware loading */
 740         struct completion fw_load_complete;
 741
 742         /* Devicelist in struct b43legacy_wl (all 802.11 cores) */
 743         struct list_head list;
 744
 745         /* Debugging stuff follows. */
 746 #ifdef CONFIG_B43LEGACY_DEBUG
 747         struct b43legacy_dfsentry *dfsentry;
 748 #endif
 749 };
 750
 751
 752 static inline
 753 struct b43legacy_wl *hw_to_b43legacy_wl(struct ieee80211_hw *hw)
 754 {
 755         return hw->priv;
 756 }
 757
 758 /* Helper function, which returns a boolean.
 759  * TRUE, if PIO is used; FALSE, if DMA is used.
 760  */
 761 #if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO)
 762 static inline
 763 int b43legacy_using_pio(struct b43legacy_wldev *dev)
 764 {
 765         return dev->__using_pio;
 766 }
 767 #elif defined(CONFIG_B43LEGACY_DMA)
 768 static inline
 769 int b43legacy_using_pio(struct b43legacy_wldev *dev)
 770 {
 771         return 0;
 772 }
 773 #elif defined(CONFIG_B43LEGACY_PIO)
 774 static inline
 775 int b43legacy_using_pio(struct b43legacy_wldev *dev)
 776 {
 777         return 1;
 778 }
 779 #else
 780 # error "Using neither DMA nor PIO? Confused..."
 781 #endif
 782
 783
 784 static inline
 785 struct b43legacy_wldev *dev_to_b43legacy_wldev(struct device *dev)
 786 {
 787         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 788         return ssb_get_drvdata(ssb_dev);
 789 }
 790
 791 /* Is the device operating in a specified mode (IEEE80211_IF_TYPE_XXX). */
 792 static inline
 793 int b43legacy_is_mode(struct b43legacy_wl *wl, int type)
 794 {
 795         return (wl->operating &&
 796                 wl->if_type == type);
 797 }
 798
 799 static inline
 800 bool is_bcm_board_vendor(struct b43legacy_wldev *dev)
 801 {
 802         return  (dev->dev->bus->boardinfo.vendor == PCI_VENDOR_ID_BROADCOM);
 803 }
 804
 805 static inline
 806 u16 b43legacy_read16(struct b43legacy_wldev *dev, u16 offset)
 807 {
 808         return ssb_read16(dev->dev, offset);
 809 }
 810
 811 static inline
 812 void b43legacy_write16(struct b43legacy_wldev *dev, u16 offset, u16 value)
 813 {
 814         ssb_write16(dev->dev, offset, value);
 815 }
 816
 817 static inline
 818 u32 b43legacy_read32(struct b43legacy_wldev *dev, u16 offset)
 819 {
 820         return ssb_read32(dev->dev, offset);
 821 }
 822
 823 static inline
 824 void b43legacy_write32(struct b43legacy_wldev *dev, u16 offset, u32 value)
 825 {
 826         ssb_write32(dev->dev, offset, value);
 827 }
 828
 829 static inline
 830 struct b43legacy_lopair *b43legacy_get_lopair(struct b43legacy_phy *phy,
 831                                               u16 radio_attenuation,
 832                                               u16 baseband_attenuation)
 833 {
 834         return phy->_lo_pairs + (radio_attenuation
 835                         + 14 * (baseband_attenuation / 2));
 836 }
 837
 838
 839
 840 /* Message printing */
 841 __printf(2, 3)
 842 void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...);
 843 __printf(2, 3)
 844 void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...);
 845 __printf(2, 3)
 846 void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...);
 847 #if B43legacy_DEBUG
 848 __printf(2, 3)
 849 void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...);
 850 #else /* DEBUG */
 851 # define b43legacydbg(wl, fmt...) do { /* nothing */ } while (0)
 852 #endif /* DEBUG */
 853
 854 /* Macros for printing a value in Q5.2 format */
 855 #define Q52_FMT         "%u.%u"
 856 #define Q52_ARG(q52)    ((q52) / 4), (((q52) & 3) * 100 / 4)
 857
 858 #endif /* B43legacy_H_ */