Merge remote-tracking branch 'battery/for-next'
[deliverable/linux.git] / drivers / net / wireless / realtek / rtl8xxxu / rtl8xxxu_8723b.c
1 /*
2 * RTL8XXXU mac80211 USB driver - 8723b specific subdriver
3 *
4 * Copyright (c) 2014 - 2016 Jes Sorensen <Jes.Sorensen@redhat.com>
5 *
6 * Portions, notably calibration code:
7 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
8 *
9 * This driver was written as a replacement for the vendor provided
10 * rtl8723au driver. As the Realtek 8xxx chips are very similar in
11 * their programming interface, I have started adding support for
12 * additional 8xxx chips like the 8192cu, 8188cus, etc.
13 *
14 * This program is free software; you can redistribute it and/or modify it
15 * under the terms of version 2 of the GNU General Public License as
16 * published by the Free Software Foundation.
17 *
18 * This program is distributed in the hope that it will be useful, but WITHOUT
19 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
20 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
21 * more details.
22 */
23
24 #include <linux/init.h>
25 #include <linux/kernel.h>
26 #include <linux/sched.h>
27 #include <linux/errno.h>
28 #include <linux/slab.h>
29 #include <linux/module.h>
30 #include <linux/spinlock.h>
31 #include <linux/list.h>
32 #include <linux/usb.h>
33 #include <linux/netdevice.h>
34 #include <linux/etherdevice.h>
35 #include <linux/ethtool.h>
36 #include <linux/wireless.h>
37 #include <linux/firmware.h>
38 #include <linux/moduleparam.h>
39 #include <net/mac80211.h>
40 #include "rtl8xxxu.h"
41 #include "rtl8xxxu_regs.h"
42
43 static struct rtl8xxxu_reg8val rtl8723b_mac_init_table[] = {
44 {0x02f, 0x30}, {0x035, 0x00}, {0x039, 0x08}, {0x04e, 0xe0},
45 {0x064, 0x00}, {0x067, 0x20}, {0x428, 0x0a}, {0x429, 0x10},
46 {0x430, 0x00}, {0x431, 0x00},
47 {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05},
48 {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05},
49 {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01},
50 {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00},
51 {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f},
52 {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00},
53 {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f},
54 {0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66},
55 {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff},
56 {0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2},
57 {0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3},
58 {0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4},
59 {0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4},
60 {0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a},
61 {0x516, 0x0a}, {0x525, 0x4f},
62 {0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50},
63 {0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a},
64 {0x620, 0xff}, {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff},
65 {0x624, 0xff}, {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff},
66 {0x638, 0x50}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e},
67 {0x63f, 0x0e}, {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00},
68 {0x652, 0xc8}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43},
69 {0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43},
70 {0x70a, 0x65}, {0x70b, 0x87}, {0x765, 0x18}, {0x76e, 0x04},
71 {0xffff, 0xff},
72 };
73
74 static struct rtl8xxxu_reg32val rtl8723b_phy_1t_init_table[] = {
75 {0x800, 0x80040000}, {0x804, 0x00000003},
76 {0x808, 0x0000fc00}, {0x80c, 0x0000000a},
77 {0x810, 0x10001331}, {0x814, 0x020c3d10},
78 {0x818, 0x02200385}, {0x81c, 0x00000000},
79 {0x820, 0x01000100}, {0x824, 0x00190204},
80 {0x828, 0x00000000}, {0x82c, 0x00000000},
81 {0x830, 0x00000000}, {0x834, 0x00000000},
82 {0x838, 0x00000000}, {0x83c, 0x00000000},
83 {0x840, 0x00010000}, {0x844, 0x00000000},
84 {0x848, 0x00000000}, {0x84c, 0x00000000},
85 {0x850, 0x00000000}, {0x854, 0x00000000},
86 {0x858, 0x569a11a9}, {0x85c, 0x01000014},
87 {0x860, 0x66f60110}, {0x864, 0x061f0649},
88 {0x868, 0x00000000}, {0x86c, 0x27272700},
89 {0x870, 0x07000760}, {0x874, 0x25004000},
90 {0x878, 0x00000808}, {0x87c, 0x00000000},
91 {0x880, 0xb0000c1c}, {0x884, 0x00000001},
92 {0x888, 0x00000000}, {0x88c, 0xccc000c0},
93 {0x890, 0x00000800}, {0x894, 0xfffffffe},
94 {0x898, 0x40302010}, {0x89c, 0x00706050},
95 {0x900, 0x00000000}, {0x904, 0x00000023},
96 {0x908, 0x00000000}, {0x90c, 0x81121111},
97 {0x910, 0x00000002}, {0x914, 0x00000201},
98 {0xa00, 0x00d047c8}, {0xa04, 0x80ff800c},
99 {0xa08, 0x8c838300}, {0xa0c, 0x2e7f120f},
100 {0xa10, 0x9500bb78}, {0xa14, 0x1114d028},
101 {0xa18, 0x00881117}, {0xa1c, 0x89140f00},
102 {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317},
103 {0xa28, 0x00000204}, {0xa2c, 0x00d30000},
104 {0xa70, 0x101fbf00}, {0xa74, 0x00000007},
105 {0xa78, 0x00000900}, {0xa7c, 0x225b0606},
106 {0xa80, 0x21806490}, {0xb2c, 0x00000000},
107 {0xc00, 0x48071d40}, {0xc04, 0x03a05611},
108 {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c},
109 {0xc10, 0x08800000}, {0xc14, 0x40000100},
110 {0xc18, 0x08800000}, {0xc1c, 0x40000100},
111 {0xc20, 0x00000000}, {0xc24, 0x00000000},
112 {0xc28, 0x00000000}, {0xc2c, 0x00000000},
113 {0xc30, 0x69e9ac44}, {0xc34, 0x469652af},
114 {0xc38, 0x49795994}, {0xc3c, 0x0a97971c},
115 {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7},
116 {0xc48, 0xec020107}, {0xc4c, 0x007f037f},
117 {0xc50, 0x69553420}, {0xc54, 0x43bc0094},
118 {0xc58, 0x00013149}, {0xc5c, 0x00250492},
119 {0xc60, 0x00000000}, {0xc64, 0x7112848b},
120 {0xc68, 0x47c00bff}, {0xc6c, 0x00000036},
121 {0xc70, 0x2c7f000d}, {0xc74, 0x020610db},
122 {0xc78, 0x0000001f}, {0xc7c, 0x00b91612},
123 {0xc80, 0x390000e4}, {0xc84, 0x20f60000},
124 {0xc88, 0x40000100}, {0xc8c, 0x20200000},
125 {0xc90, 0x00020e1a}, {0xc94, 0x00000000},
126 {0xc98, 0x00020e1a}, {0xc9c, 0x00007f7f},
127 {0xca0, 0x00000000}, {0xca4, 0x000300a0},
128 {0xca8, 0x00000000}, {0xcac, 0x00000000},
129 {0xcb0, 0x00000000}, {0xcb4, 0x00000000},
130 {0xcb8, 0x00000000}, {0xcbc, 0x28000000},
131 {0xcc0, 0x00000000}, {0xcc4, 0x00000000},
132 {0xcc8, 0x00000000}, {0xccc, 0x00000000},
133 {0xcd0, 0x00000000}, {0xcd4, 0x00000000},
134 {0xcd8, 0x64b22427}, {0xcdc, 0x00766932},
135 {0xce0, 0x00222222}, {0xce4, 0x00000000},
136 {0xce8, 0x37644302}, {0xcec, 0x2f97d40c},
137 {0xd00, 0x00000740}, {0xd04, 0x40020401},
138 {0xd08, 0x0000907f}, {0xd0c, 0x20010201},
139 {0xd10, 0xa0633333}, {0xd14, 0x3333bc53},
140 {0xd18, 0x7a8f5b6f}, {0xd2c, 0xcc979975},
141 {0xd30, 0x00000000}, {0xd34, 0x80608000},
142 {0xd38, 0x00000000}, {0xd3c, 0x00127353},
143 {0xd40, 0x00000000}, {0xd44, 0x00000000},
144 {0xd48, 0x00000000}, {0xd4c, 0x00000000},
145 {0xd50, 0x6437140a}, {0xd54, 0x00000000},
146 {0xd58, 0x00000282}, {0xd5c, 0x30032064},
147 {0xd60, 0x4653de68}, {0xd64, 0x04518a3c},
148 {0xd68, 0x00002101}, {0xd6c, 0x2a201c16},
149 {0xd70, 0x1812362e}, {0xd74, 0x322c2220},
150 {0xd78, 0x000e3c24}, {0xe00, 0x2d2d2d2d},
151 {0xe04, 0x2d2d2d2d}, {0xe08, 0x0390272d},
152 {0xe10, 0x2d2d2d2d}, {0xe14, 0x2d2d2d2d},
153 {0xe18, 0x2d2d2d2d}, {0xe1c, 0x2d2d2d2d},
154 {0xe28, 0x00000000}, {0xe30, 0x1000dc1f},
155 {0xe34, 0x10008c1f}, {0xe38, 0x02140102},
156 {0xe3c, 0x681604c2}, {0xe40, 0x01007c00},
157 {0xe44, 0x01004800}, {0xe48, 0xfb000000},
158 {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f},
159 {0xe54, 0x10008c1f}, {0xe58, 0x02140102},
160 {0xe5c, 0x28160d05}, {0xe60, 0x00000008},
161 {0xe68, 0x001b2556}, {0xe6c, 0x00c00096},
162 {0xe70, 0x00c00096}, {0xe74, 0x01000056},
163 {0xe78, 0x01000014}, {0xe7c, 0x01000056},
164 {0xe80, 0x01000014}, {0xe84, 0x00c00096},
165 {0xe88, 0x01000056}, {0xe8c, 0x00c00096},
166 {0xed0, 0x00c00096}, {0xed4, 0x00c00096},
167 {0xed8, 0x00c00096}, {0xedc, 0x000000d6},
168 {0xee0, 0x000000d6}, {0xeec, 0x01c00016},
169 {0xf14, 0x00000003}, {0xf4c, 0x00000000},
170 {0xf00, 0x00000300},
171 {0x820, 0x01000100}, {0x800, 0x83040000},
172 {0xffff, 0xffffffff},
173 };
174
175 static struct rtl8xxxu_reg32val rtl8xxx_agc_8723bu_table[] = {
176 {0xc78, 0xfd000001}, {0xc78, 0xfc010001},
177 {0xc78, 0xfb020001}, {0xc78, 0xfa030001},
178 {0xc78, 0xf9040001}, {0xc78, 0xf8050001},
179 {0xc78, 0xf7060001}, {0xc78, 0xf6070001},
180 {0xc78, 0xf5080001}, {0xc78, 0xf4090001},
181 {0xc78, 0xf30a0001}, {0xc78, 0xf20b0001},
182 {0xc78, 0xf10c0001}, {0xc78, 0xf00d0001},
183 {0xc78, 0xef0e0001}, {0xc78, 0xee0f0001},
184 {0xc78, 0xed100001}, {0xc78, 0xec110001},
185 {0xc78, 0xeb120001}, {0xc78, 0xea130001},
186 {0xc78, 0xe9140001}, {0xc78, 0xe8150001},
187 {0xc78, 0xe7160001}, {0xc78, 0xe6170001},
188 {0xc78, 0xe5180001}, {0xc78, 0xe4190001},
189 {0xc78, 0xe31a0001}, {0xc78, 0xa51b0001},
190 {0xc78, 0xa41c0001}, {0xc78, 0xa31d0001},
191 {0xc78, 0x671e0001}, {0xc78, 0x661f0001},
192 {0xc78, 0x65200001}, {0xc78, 0x64210001},
193 {0xc78, 0x63220001}, {0xc78, 0x4a230001},
194 {0xc78, 0x49240001}, {0xc78, 0x48250001},
195 {0xc78, 0x47260001}, {0xc78, 0x46270001},
196 {0xc78, 0x45280001}, {0xc78, 0x44290001},
197 {0xc78, 0x432a0001}, {0xc78, 0x422b0001},
198 {0xc78, 0x292c0001}, {0xc78, 0x282d0001},
199 {0xc78, 0x272e0001}, {0xc78, 0x262f0001},
200 {0xc78, 0x0a300001}, {0xc78, 0x09310001},
201 {0xc78, 0x08320001}, {0xc78, 0x07330001},
202 {0xc78, 0x06340001}, {0xc78, 0x05350001},
203 {0xc78, 0x04360001}, {0xc78, 0x03370001},
204 {0xc78, 0x02380001}, {0xc78, 0x01390001},
205 {0xc78, 0x013a0001}, {0xc78, 0x013b0001},
206 {0xc78, 0x013c0001}, {0xc78, 0x013d0001},
207 {0xc78, 0x013e0001}, {0xc78, 0x013f0001},
208 {0xc78, 0xfc400001}, {0xc78, 0xfb410001},
209 {0xc78, 0xfa420001}, {0xc78, 0xf9430001},
210 {0xc78, 0xf8440001}, {0xc78, 0xf7450001},
211 {0xc78, 0xf6460001}, {0xc78, 0xf5470001},
212 {0xc78, 0xf4480001}, {0xc78, 0xf3490001},
213 {0xc78, 0xf24a0001}, {0xc78, 0xf14b0001},
214 {0xc78, 0xf04c0001}, {0xc78, 0xef4d0001},
215 {0xc78, 0xee4e0001}, {0xc78, 0xed4f0001},
216 {0xc78, 0xec500001}, {0xc78, 0xeb510001},
217 {0xc78, 0xea520001}, {0xc78, 0xe9530001},
218 {0xc78, 0xe8540001}, {0xc78, 0xe7550001},
219 {0xc78, 0xe6560001}, {0xc78, 0xe5570001},
220 {0xc78, 0xe4580001}, {0xc78, 0xe3590001},
221 {0xc78, 0xa65a0001}, {0xc78, 0xa55b0001},
222 {0xc78, 0xa45c0001}, {0xc78, 0xa35d0001},
223 {0xc78, 0x675e0001}, {0xc78, 0x665f0001},
224 {0xc78, 0x65600001}, {0xc78, 0x64610001},
225 {0xc78, 0x63620001}, {0xc78, 0x62630001},
226 {0xc78, 0x61640001}, {0xc78, 0x48650001},
227 {0xc78, 0x47660001}, {0xc78, 0x46670001},
228 {0xc78, 0x45680001}, {0xc78, 0x44690001},
229 {0xc78, 0x436a0001}, {0xc78, 0x426b0001},
230 {0xc78, 0x286c0001}, {0xc78, 0x276d0001},
231 {0xc78, 0x266e0001}, {0xc78, 0x256f0001},
232 {0xc78, 0x24700001}, {0xc78, 0x09710001},
233 {0xc78, 0x08720001}, {0xc78, 0x07730001},
234 {0xc78, 0x06740001}, {0xc78, 0x05750001},
235 {0xc78, 0x04760001}, {0xc78, 0x03770001},
236 {0xc78, 0x02780001}, {0xc78, 0x01790001},
237 {0xc78, 0x017a0001}, {0xc78, 0x017b0001},
238 {0xc78, 0x017c0001}, {0xc78, 0x017d0001},
239 {0xc78, 0x017e0001}, {0xc78, 0x017f0001},
240 {0xc50, 0x69553422},
241 {0xc50, 0x69553420},
242 {0x824, 0x00390204},
243 {0xffff, 0xffffffff}
244 };
245
246 static struct rtl8xxxu_rfregval rtl8723bu_radioa_1t_init_table[] = {
247 {0x00, 0x00010000}, {0xb0, 0x000dffe0},
248 {0xfe, 0x00000000}, {0xfe, 0x00000000},
249 {0xfe, 0x00000000}, {0xb1, 0x00000018},
250 {0xfe, 0x00000000}, {0xfe, 0x00000000},
251 {0xfe, 0x00000000}, {0xb2, 0x00084c00},
252 {0xb5, 0x0000d2cc}, {0xb6, 0x000925aa},
253 {0xb7, 0x00000010}, {0xb8, 0x0000907f},
254 {0x5c, 0x00000002}, {0x7c, 0x00000002},
255 {0x7e, 0x00000005}, {0x8b, 0x0006fc00},
256 {0xb0, 0x000ff9f0}, {0x1c, 0x000739d2},
257 {0x1e, 0x00000000}, {0xdf, 0x00000780},
258 {0x50, 0x00067435},
259 /*
260 * The 8723bu vendor driver indicates that bit 8 should be set in
261 * 0x51 for package types TFBGA90, TFBGA80, and TFBGA79. However
262 * they never actually check the package type - and just default
263 * to not setting it.
264 */
265 {0x51, 0x0006b04e},
266 {0x52, 0x000007d2}, {0x53, 0x00000000},
267 {0x54, 0x00050400}, {0x55, 0x0004026e},
268 {0xdd, 0x0000004c}, {0x70, 0x00067435},
269 /*
270 * 0x71 has same package type condition as for register 0x51
271 */
272 {0x71, 0x0006b04e},
273 {0x72, 0x000007d2}, {0x73, 0x00000000},
274 {0x74, 0x00050400}, {0x75, 0x0004026e},
275 {0xef, 0x00000100}, {0x34, 0x0000add7},
276 {0x35, 0x00005c00}, {0x34, 0x00009dd4},
277 {0x35, 0x00005000}, {0x34, 0x00008dd1},
278 {0x35, 0x00004400}, {0x34, 0x00007dce},
279 {0x35, 0x00003800}, {0x34, 0x00006cd1},
280 {0x35, 0x00004400}, {0x34, 0x00005cce},
281 {0x35, 0x00003800}, {0x34, 0x000048ce},
282 {0x35, 0x00004400}, {0x34, 0x000034ce},
283 {0x35, 0x00003800}, {0x34, 0x00002451},
284 {0x35, 0x00004400}, {0x34, 0x0000144e},
285 {0x35, 0x00003800}, {0x34, 0x00000051},
286 {0x35, 0x00004400}, {0xef, 0x00000000},
287 {0xef, 0x00000100}, {0xed, 0x00000010},
288 {0x44, 0x0000add7}, {0x44, 0x00009dd4},
289 {0x44, 0x00008dd1}, {0x44, 0x00007dce},
290 {0x44, 0x00006cc1}, {0x44, 0x00005cce},
291 {0x44, 0x000044d1}, {0x44, 0x000034ce},
292 {0x44, 0x00002451}, {0x44, 0x0000144e},
293 {0x44, 0x00000051}, {0xef, 0x00000000},
294 {0xed, 0x00000000}, {0x7f, 0x00020080},
295 {0xef, 0x00002000}, {0x3b, 0x000380ef},
296 {0x3b, 0x000302fe}, {0x3b, 0x00028ce6},
297 {0x3b, 0x000200bc}, {0x3b, 0x000188a5},
298 {0x3b, 0x00010fbc}, {0x3b, 0x00008f71},
299 {0x3b, 0x00000900}, {0xef, 0x00000000},
300 {0xed, 0x00000001}, {0x40, 0x000380ef},
301 {0x40, 0x000302fe}, {0x40, 0x00028ce6},
302 {0x40, 0x000200bc}, {0x40, 0x000188a5},
303 {0x40, 0x00010fbc}, {0x40, 0x00008f71},
304 {0x40, 0x00000900}, {0xed, 0x00000000},
305 {0x82, 0x00080000}, {0x83, 0x00008000},
306 {0x84, 0x00048d80}, {0x85, 0x00068000},
307 {0xa2, 0x00080000}, {0xa3, 0x00008000},
308 {0xa4, 0x00048d80}, {0xa5, 0x00068000},
309 {0xed, 0x00000002}, {0xef, 0x00000002},
310 {0x56, 0x00000032}, {0x76, 0x00000032},
311 {0x01, 0x00000780},
312 {0xff, 0xffffffff}
313 };
314
315 static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data)
316 {
317 struct h2c_cmd h2c;
318 int reqnum = 0;
319
320 memset(&h2c, 0, sizeof(struct h2c_cmd));
321 h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER;
322 h2c.bt_mp_oper.operreq = 0 | (reqnum << 4);
323 h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE;
324 h2c.bt_mp_oper.data = data;
325 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper));
326
327 reqnum++;
328 memset(&h2c, 0, sizeof(struct h2c_cmd));
329 h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER;
330 h2c.bt_mp_oper.operreq = 0 | (reqnum << 4);
331 h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE;
332 h2c.bt_mp_oper.addr = reg;
333 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper));
334 }
335
336 static void rtl8723bu_reset_8051(struct rtl8xxxu_priv *priv)
337 {
338 u8 val8;
339 u16 sys_func;
340
341 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
342 val8 &= ~BIT(1);
343 rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
344
345 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
346 val8 &= ~BIT(0);
347 rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
348
349 sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC);
350 sys_func &= ~SYS_FUNC_CPU_ENABLE;
351 rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
352
353 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
354 val8 &= ~BIT(1);
355 rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
356
357 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
358 val8 |= BIT(0);
359 rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
360
361 sys_func |= SYS_FUNC_CPU_ENABLE;
362 rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
363 }
364
365 static void
366 rtl8723b_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
367 {
368 u32 val32, ofdm, mcs;
369 u8 cck, ofdmbase, mcsbase;
370 int group, tx_idx;
371
372 tx_idx = 0;
373 group = rtl8xxxu_gen2_channel_to_group(channel);
374
375 cck = priv->cck_tx_power_index_B[group];
376 val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32);
377 val32 &= 0xffff00ff;
378 val32 |= (cck << 8);
379 rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32);
380
381 val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
382 val32 &= 0xff;
383 val32 |= ((cck << 8) | (cck << 16) | (cck << 24));
384 rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
385
386 ofdmbase = priv->ht40_1s_tx_power_index_B[group];
387 ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b;
388 ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24;
389
390 rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm);
391 rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm);
392
393 mcsbase = priv->ht40_1s_tx_power_index_B[group];
394 if (ht40)
395 mcsbase += priv->ht40_tx_power_diff[tx_idx++].b;
396 else
397 mcsbase += priv->ht20_tx_power_diff[tx_idx++].b;
398 mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24;
399
400 rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs);
401 rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs);
402 }
403
404 static int rtl8723bu_parse_efuse(struct rtl8xxxu_priv *priv)
405 {
406 struct rtl8723bu_efuse *efuse = &priv->efuse_wifi.efuse8723bu;
407 int i;
408
409 if (efuse->rtl_id != cpu_to_le16(0x8129))
410 return -EINVAL;
411
412 ether_addr_copy(priv->mac_addr, efuse->mac_addr);
413
414 memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base,
415 sizeof(efuse->tx_power_index_A.cck_base));
416 memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base,
417 sizeof(efuse->tx_power_index_B.cck_base));
418
419 memcpy(priv->ht40_1s_tx_power_index_A,
420 efuse->tx_power_index_A.ht40_base,
421 sizeof(efuse->tx_power_index_A.ht40_base));
422 memcpy(priv->ht40_1s_tx_power_index_B,
423 efuse->tx_power_index_B.ht40_base,
424 sizeof(efuse->tx_power_index_B.ht40_base));
425
426 priv->ofdm_tx_power_diff[0].a =
427 efuse->tx_power_index_A.ht20_ofdm_1s_diff.a;
428 priv->ofdm_tx_power_diff[0].b =
429 efuse->tx_power_index_B.ht20_ofdm_1s_diff.a;
430
431 priv->ht20_tx_power_diff[0].a =
432 efuse->tx_power_index_A.ht20_ofdm_1s_diff.b;
433 priv->ht20_tx_power_diff[0].b =
434 efuse->tx_power_index_B.ht20_ofdm_1s_diff.b;
435
436 priv->ht40_tx_power_diff[0].a = 0;
437 priv->ht40_tx_power_diff[0].b = 0;
438
439 for (i = 1; i < RTL8723B_TX_COUNT; i++) {
440 priv->ofdm_tx_power_diff[i].a =
441 efuse->tx_power_index_A.pwr_diff[i - 1].ofdm;
442 priv->ofdm_tx_power_diff[i].b =
443 efuse->tx_power_index_B.pwr_diff[i - 1].ofdm;
444
445 priv->ht20_tx_power_diff[i].a =
446 efuse->tx_power_index_A.pwr_diff[i - 1].ht20;
447 priv->ht20_tx_power_diff[i].b =
448 efuse->tx_power_index_B.pwr_diff[i - 1].ht20;
449
450 priv->ht40_tx_power_diff[i].a =
451 efuse->tx_power_index_A.pwr_diff[i - 1].ht40;
452 priv->ht40_tx_power_diff[i].b =
453 efuse->tx_power_index_B.pwr_diff[i - 1].ht40;
454 }
455
456 priv->has_xtalk = 1;
457 priv->xtalk = priv->efuse_wifi.efuse8723bu.xtal_k & 0x3f;
458
459 dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name);
460 dev_info(&priv->udev->dev, "Product: %.41s\n", efuse->device_name);
461
462 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) {
463 int i;
464 unsigned char *raw = priv->efuse_wifi.raw;
465
466 dev_info(&priv->udev->dev,
467 "%s: dumping efuse (0x%02zx bytes):\n",
468 __func__, sizeof(struct rtl8723bu_efuse));
469 for (i = 0; i < sizeof(struct rtl8723bu_efuse); i += 8)
470 dev_info(&priv->udev->dev, "%02x: %8ph\n", i, &raw[i]);
471 }
472
473 return 0;
474 }
475
476 static int rtl8723bu_load_firmware(struct rtl8xxxu_priv *priv)
477 {
478 char *fw_name;
479 int ret;
480
481 if (priv->enable_bluetooth)
482 fw_name = "rtlwifi/rtl8723bu_bt.bin";
483 else
484 fw_name = "rtlwifi/rtl8723bu_nic.bin";
485
486 ret = rtl8xxxu_load_firmware(priv, fw_name);
487 return ret;
488 }
489
490 static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv)
491 {
492 u8 val8;
493 u16 val16;
494
495 val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
496 val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF;
497 rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
498
499 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00);
500
501 /* 6. 0x1f[7:0] = 0x07 */
502 val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
503 rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
504
505 /* Why? */
506 rtl8xxxu_write8(priv, REG_SYS_FUNC, 0xe3);
507 rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 1, 0x80);
508 rtl8xxxu_init_phy_regs(priv, rtl8723b_phy_1t_init_table);
509
510 rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table);
511 }
512
513 static int rtl8723bu_init_phy_rf(struct rtl8xxxu_priv *priv)
514 {
515 int ret;
516
517 ret = rtl8xxxu_init_phy_rf(priv, rtl8723bu_radioa_1t_init_table, RF_A);
518 /*
519 * PHY LCK
520 */
521 rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0);
522 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01);
523 msleep(200);
524 rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0);
525
526 return ret;
527 }
528
529 static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv)
530 {
531 u32 val32;
532
533 val32 = rtl8xxxu_read32(priv, REG_PAD_CTRL1);
534 val32 &= ~(BIT(20) | BIT(24));
535 rtl8xxxu_write32(priv, REG_PAD_CTRL1, val32);
536
537 val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG);
538 val32 &= ~BIT(4);
539 rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32);
540
541 val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG);
542 val32 |= BIT(3);
543 rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32);
544
545 val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
546 val32 |= BIT(24);
547 rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
548
549 val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
550 val32 &= ~BIT(23);
551 rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
552
553 val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER);
554 val32 |= (BIT(0) | BIT(1));
555 rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32);
556
557 val32 = rtl8xxxu_read32(priv, REG_RFE_CTRL_ANTA_SRC);
558 val32 &= 0xffffff00;
559 val32 |= 0x77;
560 rtl8xxxu_write32(priv, REG_RFE_CTRL_ANTA_SRC, val32);
561
562 val32 = rtl8xxxu_read32(priv, REG_PWR_DATA);
563 val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
564 rtl8xxxu_write32(priv, REG_PWR_DATA, val32);
565 }
566
567 static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv)
568 {
569 u32 reg_eac, reg_e94, reg_e9c, path_sel, val32;
570 int result = 0;
571
572 path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
573
574 /*
575 * Leave IQK mode
576 */
577 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
578 val32 &= 0x000000ff;
579 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
580
581 /*
582 * Enable path A PA in TX IQK mode
583 */
584 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
585 val32 |= 0x80000;
586 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
587 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000);
588 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f);
589 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87);
590
591 /*
592 * Tx IQK setting
593 */
594 rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
595 rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
596
597 /* path-A IQK setting */
598 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
599 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
600 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
601 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
602
603 rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea);
604 rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000);
605 rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
606 rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
607
608 /* LO calibration setting */
609 rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
610
611 /*
612 * Enter IQK mode
613 */
614 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
615 val32 &= 0x000000ff;
616 val32 |= 0x80800000;
617 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
618
619 /*
620 * The vendor driver indicates the USB module is always using
621 * S0S1 path 1 for the 8723bu. This may be different for 8192eu
622 */
623 if (priv->rf_paths > 1)
624 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
625 else
626 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
627
628 /*
629 * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu.
630 * No trace of this in the 8192eu or 8188eu vendor drivers.
631 */
632 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
633
634 /* One shot, path A LOK & IQK */
635 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
636 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
637
638 mdelay(1);
639
640 /* Restore Ant Path */
641 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
642 #ifdef RTL8723BU_BT
643 /* GNT_BT = 1 */
644 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
645 #endif
646
647 /*
648 * Leave IQK mode
649 */
650 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
651 val32 &= 0x000000ff;
652 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
653
654 /* Check failed */
655 reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
656 reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
657 reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
658
659 val32 = (reg_e9c >> 16) & 0x3ff;
660 if (val32 & 0x200)
661 val32 = 0x400 - val32;
662
663 if (!(reg_eac & BIT(28)) &&
664 ((reg_e94 & 0x03ff0000) != 0x01420000) &&
665 ((reg_e9c & 0x03ff0000) != 0x00420000) &&
666 ((reg_e94 & 0x03ff0000) < 0x01100000) &&
667 ((reg_e94 & 0x03ff0000) > 0x00f00000) &&
668 val32 < 0xf)
669 result |= 0x01;
670 else /* If TX not OK, ignore RX */
671 goto out;
672
673 out:
674 return result;
675 }
676
677 static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
678 {
679 u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32;
680 int result = 0;
681
682 path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
683
684 /*
685 * Leave IQK mode
686 */
687 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
688 val32 &= 0x000000ff;
689 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
690
691 /*
692 * Enable path A PA in TX IQK mode
693 */
694 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
695 val32 |= 0x80000;
696 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
697 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
698 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
699 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7);
700
701 /*
702 * Tx IQK setting
703 */
704 rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
705 rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
706
707 /* path-A IQK setting */
708 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
709 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
710 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
711 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
712
713 rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0);
714 rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000);
715 rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
716 rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
717
718 /* LO calibration setting */
719 rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
720
721 /*
722 * Enter IQK mode
723 */
724 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
725 val32 &= 0x000000ff;
726 val32 |= 0x80800000;
727 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
728
729 /*
730 * The vendor driver indicates the USB module is always using
731 * S0S1 path 1 for the 8723bu. This may be different for 8192eu
732 */
733 if (priv->rf_paths > 1)
734 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
735 else
736 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
737
738 /*
739 * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu.
740 * No trace of this in the 8192eu or 8188eu vendor drivers.
741 */
742 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
743
744 /* One shot, path A LOK & IQK */
745 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
746 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
747
748 mdelay(1);
749
750 /* Restore Ant Path */
751 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
752 #ifdef RTL8723BU_BT
753 /* GNT_BT = 1 */
754 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
755 #endif
756
757 /*
758 * Leave IQK mode
759 */
760 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
761 val32 &= 0x000000ff;
762 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
763
764 /* Check failed */
765 reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
766 reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
767 reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
768
769 val32 = (reg_e9c >> 16) & 0x3ff;
770 if (val32 & 0x200)
771 val32 = 0x400 - val32;
772
773 if (!(reg_eac & BIT(28)) &&
774 ((reg_e94 & 0x03ff0000) != 0x01420000) &&
775 ((reg_e9c & 0x03ff0000) != 0x00420000) &&
776 ((reg_e94 & 0x03ff0000) < 0x01100000) &&
777 ((reg_e94 & 0x03ff0000) > 0x00f00000) &&
778 val32 < 0xf)
779 result |= 0x01;
780 else /* If TX not OK, ignore RX */
781 goto out;
782
783 val32 = 0x80007c00 | (reg_e94 &0x3ff0000) |
784 ((reg_e9c & 0x3ff0000) >> 16);
785 rtl8xxxu_write32(priv, REG_TX_IQK, val32);
786
787 /*
788 * Modify RX IQK mode
789 */
790 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
791 val32 &= 0x000000ff;
792 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
793 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
794 val32 |= 0x80000;
795 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
796 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
797 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
798 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77);
799
800 /*
801 * PA, PAD setting
802 */
803 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0xf80);
804 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f);
805
806 /*
807 * RX IQK setting
808 */
809 rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
810
811 /* path-A IQK setting */
812 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
813 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c);
814 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
815 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
816
817 rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000);
818 rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f);
819 rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
820 rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
821
822 /* LO calibration setting */
823 rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1);
824
825 /*
826 * Enter IQK mode
827 */
828 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
829 val32 &= 0x000000ff;
830 val32 |= 0x80800000;
831 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
832
833 if (priv->rf_paths > 1)
834 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
835 else
836 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
837
838 /*
839 * Disable BT
840 */
841 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
842
843 /* One shot, path A LOK & IQK */
844 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
845 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
846
847 mdelay(1);
848
849 /* Restore Ant Path */
850 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
851 #ifdef RTL8723BU_BT
852 /* GNT_BT = 1 */
853 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
854 #endif
855
856 /*
857 * Leave IQK mode
858 */
859 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
860 val32 &= 0x000000ff;
861 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
862
863 /* Check failed */
864 reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
865 reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
866
867 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x780);
868
869 val32 = (reg_eac >> 16) & 0x3ff;
870 if (val32 & 0x200)
871 val32 = 0x400 - val32;
872
873 if (!(reg_eac & BIT(27)) &&
874 ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
875 ((reg_eac & 0x03ff0000) != 0x00360000) &&
876 ((reg_ea4 & 0x03ff0000) < 0x01100000) &&
877 ((reg_ea4 & 0x03ff0000) > 0x00f00000) &&
878 val32 < 0xf)
879 result |= 0x02;
880 else /* If TX not OK, ignore RX */
881 goto out;
882 out:
883 return result;
884 }
885
886 static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
887 int result[][8], int t)
888 {
889 struct device *dev = &priv->udev->dev;
890 u32 i, val32;
891 int path_a_ok /*, path_b_ok */;
892 int retry = 2;
893 const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
894 REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
895 REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
896 REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
897 REG_TX_OFDM_BBON, REG_TX_TO_RX,
898 REG_TX_TO_TX, REG_RX_CCK,
899 REG_RX_OFDM, REG_RX_WAIT_RIFS,
900 REG_RX_TO_RX, REG_STANDBY,
901 REG_SLEEP, REG_PMPD_ANAEN
902 };
903 const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
904 REG_TXPAUSE, REG_BEACON_CTRL,
905 REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
906 };
907 const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
908 REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
909 REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
910 REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
911 REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
912 };
913 u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff;
914 u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff;
915
916 /*
917 * Note: IQ calibration must be performed after loading
918 * PHY_REG.txt , and radio_a, radio_b.txt
919 */
920
921 if (t == 0) {
922 /* Save ADDA parameters, turn Path A ADDA on */
923 rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
924 RTL8XXXU_ADDA_REGS);
925 rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
926 rtl8xxxu_save_regs(priv, iqk_bb_regs,
927 priv->bb_backup, RTL8XXXU_BB_REGS);
928 }
929
930 rtl8xxxu_path_adda_on(priv, adda_regs, true);
931
932 /* MAC settings */
933 rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
934
935 val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING);
936 val32 |= 0x0f000000;
937 rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32);
938
939 rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
940 rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
941 rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
942
943 /*
944 * RX IQ calibration setting for 8723B D cut large current issue
945 * when leaving IPS
946 */
947 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
948 val32 &= 0x000000ff;
949 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
950
951 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
952 val32 |= 0x80000;
953 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
954
955 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
956 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
957 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7);
958
959 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED);
960 val32 |= 0x20;
961 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32);
962
963 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd);
964
965 for (i = 0; i < retry; i++) {
966 path_a_ok = rtl8723bu_iqk_path_a(priv);
967 if (path_a_ok == 0x01) {
968 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
969 val32 &= 0x000000ff;
970 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
971
972 val32 = rtl8xxxu_read32(priv,
973 REG_TX_POWER_BEFORE_IQK_A);
974 result[t][0] = (val32 >> 16) & 0x3ff;
975 val32 = rtl8xxxu_read32(priv,
976 REG_TX_POWER_AFTER_IQK_A);
977 result[t][1] = (val32 >> 16) & 0x3ff;
978
979 break;
980 }
981 }
982
983 if (!path_a_ok)
984 dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__);
985
986 for (i = 0; i < retry; i++) {
987 path_a_ok = rtl8723bu_rx_iqk_path_a(priv);
988 if (path_a_ok == 0x03) {
989 val32 = rtl8xxxu_read32(priv,
990 REG_RX_POWER_BEFORE_IQK_A_2);
991 result[t][2] = (val32 >> 16) & 0x3ff;
992 val32 = rtl8xxxu_read32(priv,
993 REG_RX_POWER_AFTER_IQK_A_2);
994 result[t][3] = (val32 >> 16) & 0x3ff;
995
996 break;
997 }
998 }
999
1000 if (!path_a_ok)
1001 dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__);
1002
1003 if (priv->tx_paths > 1) {
1004 #if 1
1005 dev_warn(dev, "%s: Path B not supported\n", __func__);
1006 #else
1007
1008 /*
1009 * Path A into standby
1010 */
1011 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
1012 val32 &= 0x000000ff;
1013 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
1014 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000);
1015
1016 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
1017 val32 &= 0x000000ff;
1018 val32 |= 0x80800000;
1019 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
1020
1021 /* Turn Path B ADDA on */
1022 rtl8xxxu_path_adda_on(priv, adda_regs, false);
1023
1024 for (i = 0; i < retry; i++) {
1025 path_b_ok = rtl8xxxu_iqk_path_b(priv);
1026 if (path_b_ok == 0x03) {
1027 val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
1028 result[t][4] = (val32 >> 16) & 0x3ff;
1029 val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
1030 result[t][5] = (val32 >> 16) & 0x3ff;
1031 break;
1032 }
1033 }
1034
1035 if (!path_b_ok)
1036 dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
1037
1038 for (i = 0; i < retry; i++) {
1039 path_b_ok = rtl8723bu_rx_iqk_path_b(priv);
1040 if (path_a_ok == 0x03) {
1041 val32 = rtl8xxxu_read32(priv,
1042 REG_RX_POWER_BEFORE_IQK_B_2);
1043 result[t][6] = (val32 >> 16) & 0x3ff;
1044 val32 = rtl8xxxu_read32(priv,
1045 REG_RX_POWER_AFTER_IQK_B_2);
1046 result[t][7] = (val32 >> 16) & 0x3ff;
1047 break;
1048 }
1049 }
1050
1051 if (!path_b_ok)
1052 dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__);
1053 #endif
1054 }
1055
1056 /* Back to BB mode, load original value */
1057 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
1058 val32 &= 0x000000ff;
1059 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
1060
1061 if (t) {
1062 /* Reload ADDA power saving parameters */
1063 rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
1064 RTL8XXXU_ADDA_REGS);
1065
1066 /* Reload MAC parameters */
1067 rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
1068
1069 /* Reload BB parameters */
1070 rtl8xxxu_restore_regs(priv, iqk_bb_regs,
1071 priv->bb_backup, RTL8XXXU_BB_REGS);
1072
1073 /* Restore RX initial gain */
1074 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
1075 val32 &= 0xffffff00;
1076 rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50);
1077 rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc);
1078
1079 if (priv->tx_paths > 1) {
1080 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1);
1081 val32 &= 0xffffff00;
1082 rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
1083 val32 | 0x50);
1084 rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
1085 val32 | xb_agc);
1086 }
1087
1088 /* Load 0xe30 IQC default value */
1089 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
1090 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
1091 }
1092 }
1093
1094 static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
1095 {
1096 struct device *dev = &priv->udev->dev;
1097 int result[4][8]; /* last is final result */
1098 int i, candidate;
1099 bool path_a_ok, path_b_ok;
1100 u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
1101 u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
1102 u32 val32, bt_control;
1103 s32 reg_tmp = 0;
1104 bool simu;
1105
1106 rtl8xxxu_gen2_prepare_calibrate(priv, 1);
1107
1108 memset(result, 0, sizeof(result));
1109 candidate = -1;
1110
1111 path_a_ok = false;
1112 path_b_ok = false;
1113
1114 bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU);
1115
1116 for (i = 0; i < 3; i++) {
1117 rtl8723bu_phy_iqcalibrate(priv, result, i);
1118
1119 if (i == 1) {
1120 simu = rtl8xxxu_gen2_simularity_compare(priv,
1121 result, 0, 1);
1122 if (simu) {
1123 candidate = 0;
1124 break;
1125 }
1126 }
1127
1128 if (i == 2) {
1129 simu = rtl8xxxu_gen2_simularity_compare(priv,
1130 result, 0, 2);
1131 if (simu) {
1132 candidate = 0;
1133 break;
1134 }
1135
1136 simu = rtl8xxxu_gen2_simularity_compare(priv,
1137 result, 1, 2);
1138 if (simu) {
1139 candidate = 1;
1140 } else {
1141 for (i = 0; i < 8; i++)
1142 reg_tmp += result[3][i];
1143
1144 if (reg_tmp)
1145 candidate = 3;
1146 else
1147 candidate = -1;
1148 }
1149 }
1150 }
1151
1152 for (i = 0; i < 4; i++) {
1153 reg_e94 = result[i][0];
1154 reg_e9c = result[i][1];
1155 reg_ea4 = result[i][2];
1156 reg_eac = result[i][3];
1157 reg_eb4 = result[i][4];
1158 reg_ebc = result[i][5];
1159 reg_ec4 = result[i][6];
1160 reg_ecc = result[i][7];
1161 }
1162
1163 if (candidate >= 0) {
1164 reg_e94 = result[candidate][0];
1165 priv->rege94 = reg_e94;
1166 reg_e9c = result[candidate][1];
1167 priv->rege9c = reg_e9c;
1168 reg_ea4 = result[candidate][2];
1169 reg_eac = result[candidate][3];
1170 reg_eb4 = result[candidate][4];
1171 priv->regeb4 = reg_eb4;
1172 reg_ebc = result[candidate][5];
1173 priv->regebc = reg_ebc;
1174 reg_ec4 = result[candidate][6];
1175 reg_ecc = result[candidate][7];
1176 dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
1177 dev_dbg(dev,
1178 "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x "
1179 "ecc=%x\n ", __func__, reg_e94, reg_e9c,
1180 reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
1181 path_a_ok = true;
1182 path_b_ok = true;
1183 } else {
1184 reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
1185 reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
1186 }
1187
1188 if (reg_e94 && candidate >= 0)
1189 rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
1190 candidate, (reg_ea4 == 0));
1191
1192 if (priv->tx_paths > 1 && reg_eb4)
1193 rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
1194 candidate, (reg_ec4 == 0));
1195
1196 rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg,
1197 priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
1198
1199 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control);
1200
1201 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
1202 val32 |= 0x80000;
1203 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
1204 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000);
1205 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
1206 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177);
1207 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED);
1208 val32 |= 0x20;
1209 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32);
1210 rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd);
1211
1212 if (priv->rf_paths > 1)
1213 dev_dbg(dev, "%s: 8723BU 2T not supported\n", __func__);
1214
1215 rtl8xxxu_gen2_prepare_calibrate(priv, 0);
1216 }
1217
1218 static int rtl8723bu_active_to_emu(struct rtl8xxxu_priv *priv)
1219 {
1220 u8 val8;
1221 u16 val16;
1222 u32 val32;
1223 int count, ret = 0;
1224
1225 /* Turn off RF */
1226 rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
1227
1228 /* Enable rising edge triggering interrupt */
1229 val16 = rtl8xxxu_read16(priv, REG_GPIO_INTM);
1230 val16 &= ~GPIO_INTM_EDGE_TRIG_IRQ;
1231 rtl8xxxu_write16(priv, REG_GPIO_INTM, val16);
1232
1233 /* Release WLON reset 0x04[16]= 1*/
1234 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
1235 val32 |= APS_FSMCO_WLON_RESET;
1236 rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
1237
1238 /* 0x0005[1] = 1 turn off MAC by HW state machine*/
1239 val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
1240 val8 |= BIT(1);
1241 rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
1242
1243 for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
1244 val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
1245 if ((val8 & BIT(1)) == 0)
1246 break;
1247 udelay(10);
1248 }
1249
1250 if (!count) {
1251 dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n",
1252 __func__);
1253 ret = -EBUSY;
1254 goto exit;
1255 }
1256
1257 /* Enable BT control XTAL setting */
1258 val8 = rtl8xxxu_read8(priv, REG_AFE_MISC);
1259 val8 &= ~AFE_MISC_WL_XTAL_CTRL;
1260 rtl8xxxu_write8(priv, REG_AFE_MISC, val8);
1261
1262 /* 0x0000[5] = 1 analog Ips to digital, 1:isolation */
1263 val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
1264 val8 |= SYS_ISO_ANALOG_IPS;
1265 rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
1266
1267 /* 0x0020[0] = 0 disable LDOA12 MACRO block*/
1268 val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL);
1269 val8 &= ~LDOA15_ENABLE;
1270 rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8);
1271
1272 exit:
1273 return ret;
1274 }
1275
1276 static int rtl8723b_emu_to_active(struct rtl8xxxu_priv *priv)
1277 {
1278 u8 val8;
1279 u32 val32;
1280 int count, ret = 0;
1281
1282 /* 0x20[0] = 1 enable LDOA12 MACRO block for all interface */
1283 val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL);
1284 val8 |= LDOA15_ENABLE;
1285 rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8);
1286
1287 /* 0x67[0] = 0 to disable BT_GPS_SEL pins*/
1288 val8 = rtl8xxxu_read8(priv, 0x0067);
1289 val8 &= ~BIT(4);
1290 rtl8xxxu_write8(priv, 0x0067, val8);
1291
1292 mdelay(1);
1293
1294 /* 0x00[5] = 0 release analog Ips to digital, 1:isolation */
1295 val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
1296 val8 &= ~SYS_ISO_ANALOG_IPS;
1297 rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
1298
1299 /* Disable SW LPS 0x04[10]= 0 */
1300 val32 = rtl8xxxu_read8(priv, REG_APS_FSMCO);
1301 val32 &= ~APS_FSMCO_SW_LPS;
1302 rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
1303
1304 /* Wait until 0x04[17] = 1 power ready */
1305 for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
1306 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
1307 if (val32 & BIT(17))
1308 break;
1309
1310 udelay(10);
1311 }
1312
1313 if (!count) {
1314 ret = -EBUSY;
1315 goto exit;
1316 }
1317
1318 /* We should be able to optimize the following three entries into one */
1319
1320 /* Release WLON reset 0x04[16]= 1*/
1321 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
1322 val32 |= APS_FSMCO_WLON_RESET;
1323 rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
1324
1325 /* Disable HWPDN 0x04[15]= 0*/
1326 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
1327 val32 &= ~APS_FSMCO_HW_POWERDOWN;
1328 rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
1329
1330 /* Disable WL suspend*/
1331 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
1332 val32 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE);
1333 rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
1334
1335 /* Set, then poll until 0 */
1336 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
1337 val32 |= APS_FSMCO_MAC_ENABLE;
1338 rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
1339
1340 for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
1341 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
1342 if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) {
1343 ret = 0;
1344 break;
1345 }
1346 udelay(10);
1347 }
1348
1349 if (!count) {
1350 ret = -EBUSY;
1351 goto exit;
1352 }
1353
1354 /* Enable WL control XTAL setting */
1355 val8 = rtl8xxxu_read8(priv, REG_AFE_MISC);
1356 val8 |= AFE_MISC_WL_XTAL_CTRL;
1357 rtl8xxxu_write8(priv, REG_AFE_MISC, val8);
1358
1359 /* Enable falling edge triggering interrupt */
1360 val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 1);
1361 val8 |= BIT(1);
1362 rtl8xxxu_write8(priv, REG_GPIO_INTM + 1, val8);
1363
1364 /* Enable GPIO9 interrupt mode */
1365 val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2 + 1);
1366 val8 |= BIT(1);
1367 rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2 + 1, val8);
1368
1369 /* Enable GPIO9 input mode */
1370 val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2);
1371 val8 &= ~BIT(1);
1372 rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2, val8);
1373
1374 /* Enable HSISR GPIO[C:0] interrupt */
1375 val8 = rtl8xxxu_read8(priv, REG_HSIMR);
1376 val8 |= BIT(0);
1377 rtl8xxxu_write8(priv, REG_HSIMR, val8);
1378
1379 /* Enable HSISR GPIO9 interrupt */
1380 val8 = rtl8xxxu_read8(priv, REG_HSIMR + 2);
1381 val8 |= BIT(1);
1382 rtl8xxxu_write8(priv, REG_HSIMR + 2, val8);
1383
1384 val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL);
1385 val8 |= MULTI_WIFI_HW_ROF_EN;
1386 rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL, val8);
1387
1388 /* For GPIO9 internal pull high setting BIT(14) */
1389 val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL + 1);
1390 val8 |= BIT(6);
1391 rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL + 1, val8);
1392
1393 exit:
1394 return ret;
1395 }
1396
1397 static int rtl8723bu_power_on(struct rtl8xxxu_priv *priv)
1398 {
1399 u8 val8;
1400 u16 val16;
1401 u32 val32;
1402 int ret;
1403
1404 rtl8xxxu_disabled_to_emu(priv);
1405
1406 ret = rtl8723b_emu_to_active(priv);
1407 if (ret)
1408 goto exit;
1409
1410 /*
1411 * Enable MAC DMA/WMAC/SCHEDULE/SEC block
1412 * Set CR bit10 to enable 32k calibration.
1413 */
1414 val16 = rtl8xxxu_read16(priv, REG_CR);
1415 val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
1416 CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
1417 CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
1418 CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE |
1419 CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE);
1420 rtl8xxxu_write16(priv, REG_CR, val16);
1421
1422 /*
1423 * BT coexist power on settings. This is identical for 1 and 2
1424 * antenna parts.
1425 */
1426 rtl8xxxu_write8(priv, REG_PAD_CTRL1 + 3, 0x20);
1427
1428 val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
1429 val16 |= SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN;
1430 rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
1431
1432 rtl8xxxu_write8(priv, REG_BT_CONTROL_8723BU + 1, 0x18);
1433 rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04);
1434 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00);
1435 /* Antenna inverse */
1436 rtl8xxxu_write8(priv, 0xfe08, 0x01);
1437
1438 val16 = rtl8xxxu_read16(priv, REG_PWR_DATA);
1439 val16 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
1440 rtl8xxxu_write16(priv, REG_PWR_DATA, val16);
1441
1442 val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
1443 val32 |= LEDCFG0_DPDT_SELECT;
1444 rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
1445
1446 val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1);
1447 val8 &= ~PAD_CTRL1_SW_DPDT_SEL_DATA;
1448 rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8);
1449 exit:
1450 return ret;
1451 }
1452
1453 static void rtl8723bu_power_off(struct rtl8xxxu_priv *priv)
1454 {
1455 u8 val8;
1456 u16 val16;
1457
1458 rtl8xxxu_flush_fifo(priv);
1459
1460 /*
1461 * Disable TX report timer
1462 */
1463 val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
1464 val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
1465 rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
1466
1467 rtl8xxxu_write8(priv, REG_CR, 0x0000);
1468
1469 rtl8xxxu_active_to_lps(priv);
1470
1471 /* Reset Firmware if running in RAM */
1472 if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
1473 rtl8xxxu_firmware_self_reset(priv);
1474
1475 /* Reset MCU */
1476 val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
1477 val16 &= ~SYS_FUNC_CPU_ENABLE;
1478 rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
1479
1480 /* Reset MCU ready status */
1481 rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
1482
1483 rtl8723bu_active_to_emu(priv);
1484
1485 val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
1486 val8 |= BIT(3); /* APS_FSMCO_HW_SUSPEND */
1487 rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
1488
1489 /* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */
1490 val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2);
1491 val8 |= BIT(0);
1492 rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8);
1493 }
1494
1495 static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv)
1496 {
1497 struct h2c_cmd h2c;
1498 u32 val32;
1499 u8 val8;
1500
1501 /*
1502 * No indication anywhere as to what 0x0790 does. The 2 antenna
1503 * vendor code preserves bits 6-7 here.
1504 */
1505 rtl8xxxu_write8(priv, 0x0790, 0x05);
1506 /*
1507 * 0x0778 seems to be related to enabling the number of antennas
1508 * In the vendor driver halbtc8723b2ant_InitHwConfig() sets it
1509 * to 0x03, while halbtc8723b1ant_InitHwConfig() sets it to 0x01
1510 */
1511 rtl8xxxu_write8(priv, 0x0778, 0x01);
1512
1513 val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG);
1514 val8 |= BIT(5);
1515 rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8);
1516
1517 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780);
1518
1519 rtl8723bu_write_btreg(priv, 0x3c, 0x15); /* BT TRx Mask on */
1520
1521 /*
1522 * Set BT grant to low
1523 */
1524 memset(&h2c, 0, sizeof(struct h2c_cmd));
1525 h2c.bt_grant.cmd = H2C_8723B_BT_GRANT;
1526 h2c.bt_grant.data = 0;
1527 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant));
1528
1529 /*
1530 * WLAN action by PTA
1531 */
1532 rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04);
1533
1534 /*
1535 * BT select S0/S1 controlled by WiFi
1536 */
1537 val8 = rtl8xxxu_read8(priv, 0x0067);
1538 val8 |= BIT(5);
1539 rtl8xxxu_write8(priv, 0x0067, val8);
1540
1541 val32 = rtl8xxxu_read32(priv, REG_PWR_DATA);
1542 val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
1543 rtl8xxxu_write32(priv, REG_PWR_DATA, val32);
1544
1545 /*
1546 * Bits 6/7 are marked in/out ... but for what?
1547 */
1548 rtl8xxxu_write8(priv, 0x0974, 0xff);
1549
1550 val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER);
1551 val32 |= (BIT(0) | BIT(1));
1552 rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32);
1553
1554 rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77);
1555
1556 val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
1557 val32 &= ~BIT(24);
1558 val32 |= BIT(23);
1559 rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
1560
1561 /*
1562 * Fix external switch Main->S1, Aux->S0
1563 */
1564 val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1);
1565 val8 &= ~BIT(0);
1566 rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8);
1567
1568 memset(&h2c, 0, sizeof(struct h2c_cmd));
1569 h2c.ant_sel_rsv.cmd = H2C_8723B_ANT_SEL_RSV;
1570 h2c.ant_sel_rsv.ant_inverse = 1;
1571 h2c.ant_sel_rsv.int_switch_type = 0;
1572 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv));
1573
1574 /*
1575 * 0x280, 0x00, 0x200, 0x80 - not clear
1576 */
1577 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00);
1578
1579 /*
1580 * Software control, antenna at WiFi side
1581 */
1582 #ifdef NEED_PS_TDMA
1583 rtl8723bu_set_ps_tdma(priv, 0x08, 0x00, 0x00, 0x00, 0x00);
1584 #endif
1585
1586 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555);
1587 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555);
1588 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
1589 rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
1590
1591 memset(&h2c, 0, sizeof(struct h2c_cmd));
1592 h2c.bt_info.cmd = H2C_8723B_BT_INFO;
1593 h2c.bt_info.data = BIT(0);
1594 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info));
1595
1596 memset(&h2c, 0, sizeof(struct h2c_cmd));
1597 h2c.ignore_wlan.cmd = H2C_8723B_BT_IGNORE_WLANACT;
1598 h2c.ignore_wlan.data = 0;
1599 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan));
1600 }
1601
1602 static void rtl8723bu_init_aggregation(struct rtl8xxxu_priv *priv)
1603 {
1604 u32 agg_rx;
1605 u8 agg_ctrl;
1606
1607 /*
1608 * For now simply disable RX aggregation
1609 */
1610 agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
1611 agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
1612
1613 agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH);
1614 agg_rx &= ~RXDMA_USB_AGG_ENABLE;
1615 agg_rx &= ~0xff0f;
1616
1617 rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
1618 rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx);
1619 }
1620
1621 static void rtl8723bu_init_statistics(struct rtl8xxxu_priv *priv)
1622 {
1623 u32 val32;
1624
1625 /* Time duration for NHM unit: 4us, 0x2710=40ms */
1626 rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0x2710);
1627 rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff);
1628 rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff52);
1629 rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff);
1630 /* TH8 */
1631 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
1632 val32 |= 0xff;
1633 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
1634 /* Enable CCK */
1635 val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B);
1636 val32 |= BIT(8) | BIT(9) | BIT(10);
1637 rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32);
1638 /* Max power amongst all RX antennas */
1639 val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC);
1640 val32 |= BIT(7);
1641 rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32);
1642 }
1643
1644 struct rtl8xxxu_fileops rtl8723bu_fops = {
1645 .parse_efuse = rtl8723bu_parse_efuse,
1646 .load_firmware = rtl8723bu_load_firmware,
1647 .power_on = rtl8723bu_power_on,
1648 .power_off = rtl8723bu_power_off,
1649 .reset_8051 = rtl8723bu_reset_8051,
1650 .llt_init = rtl8xxxu_auto_llt_table,
1651 .init_phy_bb = rtl8723bu_init_phy_bb,
1652 .init_phy_rf = rtl8723bu_init_phy_rf,
1653 .phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
1654 .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
1655 .config_channel = rtl8xxxu_gen2_config_channel,
1656 .parse_rx_desc = rtl8xxxu_parse_rxdesc24,
1657 .init_aggregation = rtl8723bu_init_aggregation,
1658 .init_statistics = rtl8723bu_init_statistics,
1659 .enable_rf = rtl8723b_enable_rf,
1660 .disable_rf = rtl8xxxu_gen2_disable_rf,
1661 .usb_quirks = rtl8xxxu_gen2_usb_quirks,
1662 .set_tx_power = rtl8723b_set_tx_power,
1663 .update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
1664 .report_connect = rtl8xxxu_gen2_report_connect,
1665 .fill_txdesc = rtl8xxxu_fill_txdesc_v2,
1666 .writeN_block_size = 1024,
1667 .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
1668 .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
1669 .has_s0s1 = 1,
1670 .has_tx_report = 1,
1671 .gen2_thermal_meter = 1,
1672 .adda_1t_init = 0x01c00014,
1673 .adda_1t_path_on = 0x01c00014,
1674 .adda_2t_path_on_a = 0x01c00014,
1675 .adda_2t_path_on_b = 0x01c00014,
1676 .trxff_boundary = 0x3f7f,
1677 .pbp_rx = PBP_PAGE_SIZE_256,
1678 .pbp_tx = PBP_PAGE_SIZE_256,
1679 .mactable = rtl8723b_mac_init_table,
1680 .total_page_num = TX_TOTAL_PAGE_NUM_8723B,
1681 .page_num_hi = TX_PAGE_NUM_HI_PQ_8723B,
1682 .page_num_lo = TX_PAGE_NUM_LO_PQ_8723B,
1683 .page_num_norm = TX_PAGE_NUM_NORM_PQ_8723B,
1684 };
This page took 0.102874 seconds and 5 git commands to generate.